Configuring FSCM after EHP5

Hello,
We have upgraded our SAP R/3 system to EHP5 SP4.
As per SAP documents we donot need additional XI/PI server for configuring credit management .
We have configured Web services reliable messaging (WS-RM) in our system.
Then we use the SOA Manager to configure the inbound service interfaces and created the logical ports for the outbound consumer proxies.
As both the Web interfaces and SAP Credit Management run on the same system, we choose the Local System Call option under Transport Relationship on the Transport Settings tab page.
after configuring the above we are not able to get the desired output in transaction BP .
we are getting error in SXMB_MONI and monitor for processed XML message
"No implementing class registered for the interface
(ABAP interface, request message
CreditCommitmentNotification_Out, request message,
namespace
http://sap.com/xi/PI/FIN/Operational/Global)"
Please help us.
Thanks & Regards
Prasanjeet

Similar Messages

Sql Server 2014 showing no services in the configuration manager after install?

I'm using Windows 8. Recently I downloaded sql server management studio 2014 from the official website. But when I open the Sql server 2014 Configuration Manager there are
no services listed.
During installation, there were no any errors.
See pic from here -> http://stackoverflow.com/questions/26159248/sql-server-2014-showing-no-services-in-the-configuration-manager-after-install?noredirect=1#comment41009151_26159248
I did search everywhere but still I didn't find anything, please help me resolve this issue. I downloaded Sql server management studio 2014 from here-> http://msdn.microsoft.com/en-in/evalcenter/dn434042.aspx
Inside `win+r` as i type `services.msc` I'm unable to see any sql or service into it.

I downloaded sql server management studio 2014 from the official website. But when I open the Sql server 2014 Configuration Manager there are
no services listed.
Of course not, SSMS = SQL Server Management Studio is just a tool/frontend, not a Service. You have to install SQL Server database engine.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Reports doesn't shows horizontal scroll bar after EHP5

Hi All,
After EHP5 SP level, under menu MSS -> My Staff -> Reporting, any reports doesn't shows horizontal scroll bar, to view last colums. I tried with Authroziation SAP ALL but still issue persists.
Thanks,
Cheers!!!
Sara

can you chekc note 1531182
1. Open SAP Note 19466 - "Downloading SAP kernel patches"
2. Follow the instructions on the a above note and implement the Kernel
patches contained on SAP Note 1531182 - "Number of fixed columns is
incorrect"

Configure OEM after cold cloning

Dear All
After performing cold cloning ,I am trying to configure OEM which shows me error message in logfile,
CONFIG: ORA-20001: SYSMAN already exists..
Do I need to drop DBSNMP and SYSMAN schema and create repos from the beginning, if yes then is there any effect on database if I drop schemas.
kindly post steps about configuring OEM after cold cloning .
Database Version : 11.2.0.1
Thanks.

I'm not sure what you mean by "cold cloning." What version of EM are you using, and what is it you want to do?

Missing "Planning" option in configuration utility after installing BPMA

Hello,
I am unable to find "planning" option in configuration utility after installing BPMA.
But the planning applications are working normally.
Has anyone faced this issue before?
Can anyone please tell me how to bring the back in configuration utility?
Thanks
Hemanth

Hello Azmat,
You are right I did the same.
It was a big mess when I did that. I had to reapply patches and re-set DIM settings.
I saw this posting by John in the forms.
Planning Option Not Visible in Configuration Utility
Wondering if this is the solution.But I found this post after re-installing planning in Dev and QA.
I am yet to install EPMA in prod. I want to see if I can install it without disturbing other environments.
Thanks
Hemanth

Network adapter configuration error after quick migrate of stopped VM in 2012 r2 data-center edition 3 node cluster environment

We've got a couple of Windows 2012 r2 / Hyper-V 3 node clusters, and I have a problem with network adapters on them.
I have 3 node cluster all vm running fine on node 1 and 2 also quick and live migration very good between
node 1 and node 2, but no vm migrating on node 3. show "Network adapter configuration error".
If the VM is powered off, and I move it to 3rd
host (quick migration via Failover Cluster Manager), the network adapter loses its connection to the virtual switch - it turns to "Configuration Error"..if
manually change V switch of every VM then it worked only on 3rd node, and having same problem on node 1 and 2.
Quick migrate with the power off, and it fails to pick up the VSwitch on the3rd host.
Thanks
Shipon

Hi,
> I created a new VM via the Failover Cluster Manager (ie not via Hyper-V manager on one of the nodes).
Generally, this issue happens if a network adapter is added or removed on a highly available virtual machine using the Hyper-V manager console. Since the Hyper-V Manager console is not cluster aware, which means that configuration changes that are made to
virtual networks or virtual machines in the Hyper-V Manager console must be replicated to the other cluster nodes by using the “refresh virtual machine configuration” option in the Failover Cluster Manager console.
I know that “refresh virtual machine configuration” option is not needed if you change virtual machine settings using the Failover Cluster Manager console, but you may try to refresh the configuration of virtual machine to check the result.
In the Failover Cluster Manager console, expand Services and Applications, and then click the virtual machine for which you want to refresh the configuration.
In the Actions pane, scroll down, click More Actions and then click Refresh virtual machine configuration.
For more information please refer to following MS articles:
Refresh the Configuration of a Virtual Machine
http://technet.microsoft.com/en-us/library/dd759135.aspx
Highly Available Virtual Machines Lose Configuration Settings after Failover in Windows Server 2008 Failover Clusters
http://support.microsoft.com/kb/2000016
Hyper-V Live Migration fails on Windows Server 2008 R2 with Event ID 12080
http://support.microsoft.com/kb/2592237
Hope this helps!
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Lawrence
TechNet Community Support

RAID ADMIN CONFIGURATION RESETS AFTER LAUNCH

Hi everyybody,
The RaidAdmin configuration resets after starting the computer, I have always to reconfigure it every time I start the compute.
Thanks in advance.

If you are talking about LUN masking settings, that I have seen before but not due to machine restart. but simply for certain release of RAID ADMIN, the feature has some bug such that the effects did not 'stick'.
Other then that I have not seen RAID ADMIN settings not stick across reboot.
You may go to Disk Utility to make sure that you have verify and repair any potential permissions issues on the primary application disk volume.

How can I configure EM after machine name changed?

Dear all,
How can I configure EM after machine name changed?
Thanks in advance.

You can change it for Management Agents, but you need to re-install OMS if the hostname for the OMS host has changed.

How to configure FSCM WS-RM on EHP5?

Hi All,
Has anyone managed to configure the WS-RM for FSCM calls? How to proceed?
Thanks.

I believe there will be a how to blog or article published on SDN shortly.

FSCM - SD (EHP5) integration using WS-RM

Hello experts ,
We are trying to Integrate FSCM with SD in EHP5 release using WS-RM (instead of PI).We are now successfully integrate using WSRM but with a work around . Need your suggestion and few answers.
Situation :
Once we executed the VA01 transaction we were getting update termination issue . After lots of debuggung we found that system was trying to get the Business system details ( Own business system data ) . The table lcrt_clntcache had no values.
Solution
We inserted appropriate values in the Table LCRT_CLNTCACH (business system data ) and now it works .This is a work around we got as of now.Credit checks are happening successfully and also integration is good .
(typically if we define business system in SLD (PI) , and run SLD_CHECK , this table gets populated , but in our case we are not using PI instead we are using WS-RM)
But now few questions arise .
a) Why do we need a business system in case we are not using PI ( typically we define business system and technical system in PI ) and instead using WS-RM ?
b) Is it a good practice to update the table ( as did in workaround above )?
c) Is this any bug and needs to be consulted with SAP ?
Please let me know your views

Hi ,
1- "
While saving sales order i am getting pop up window to enter client, username and password to connect to application server. Is this the normal behaviour?
The reason for this behaviour: 1- there is no user and password defined while creating the logical port for the consumer or 2- the user / password specified are not authorized.
Solution : provide the user / password (WSDL access user ) for the logical port .(In SOAMANAGER).
(User here must have proper roles assigned to it).
2-
"Also sales order is being created without credit check perform. When i check prcessed xml msgs, it shows error that INTERFACE_REGISTRATION_ERROR for one of the services i have mapped in SOA."
This is interesting .I will try to help you if you can provide some more data.
Are you getting this error for the creditcommitmentnotification_out ?
can you open SPROXY and check if the message interface is green over there?
Also . have you defined a Business System in SLD and execute SLD_CHECK?

Implementing FSCM with EHP5

Hello,
We have upgraded our SAP R/3 system to EHP5 SP4.
As per SAP documents we donot need additional XI/PI server for configuring credit management .
We have configured Web services reliable messaging (WS-RM) in our system.
Then we use the SOA Manager to configure the inbound service interfaces and created the logical ports for the outbound consumer proxies.
As both the Web interfaces and SAP Credit Management run on the same system, we choose the Local System Call option under Transport Relationship on the Transport Settings tab page.
after configuring the above we are not able to get the desired output in transaction BP .
we are getting error in SXMB_MONI and monitor for processed XML message
"No implementing class registered for the interface
(ABAP interface, request message
CreditCommitmentNotification_Out, request message,
namespace
http://sap.com/xi/PI/FIN/Operational/Global)"
Please help us.
Thanks & Regards
Prasanjeet

Hello Bhaskar,
Thanks for replying
We would like to explicit mention that we do not have a separate Xi(PI) server.
For credit mangement functionality we are trying to connect FI-AR system
to the SAP Credit Management system via service interfaces both the business system is a part of same SAP R/3 system.
here we are not connecting any two external SAP or non SAP system.
in SOAMANAGER we have service CreditCommitmentNotification_In (already present) there we create an end point for for the receiver interface.
with following detail
Provider Security
Communication Security : None (HTTP)
transport channel authentication :UserID/password
Transport Settings:
Make Local Call: Local System call.
Then we open the "Open WSDL document for selected binding or service" and copy the URL
Then we Integrate the sender interface CreditCommitmentNotification_Out from the name space http://sap.com/xi/PI/FIN/Operational/Global
there we create a logical port for the sender interface using the URL from WSDL
Could you please let us know if any activity had been left ,which needs to be done.
Thanks & Regards
Prasanjeet

Error in Configuration Wizard after installing SharePoint 2013 Service Pack 1

Windows Server 2012 with latest updates and SharePoint 2013 with latest updates:
I installed SharePoint 2013 Service Pack 1 and when I run the configuration Wizard i get this error:
Error in Configuration Wizard
Resource id to be retrieved is PostSetupConfigurationFailedEventLog for language English (United States)
Resource retrieved id PostSetupConfigurationFailedEventLog is Configuration of SharePoint Products failed. Configuration must be performed in order for this product to operate properly. To diagnose the problem, review the extended error information
located at {0}, fix the problem, and run this configuration wizard again.
Leaving function StringResourceManager.GetResourceString
Configuration of SharePoint Products failed. Configuration must be performed in order for this product to operate properly. To diagnose the problem, review the extended error information located at C:\Program Files\Common Files\Microsoft Shared\Web
Server Extensions\15\LOGS\PSCDiagnostics_3_8_2014_23_55_49_686_1872915373.log, fix the problem, and run this configuration wizard again.
In event view I see this two errors:
1) First error
System
Provider
[ Name]
SharePoint 2010 Products Configuration Wizard
EventID
104
[ Qualifiers]
0
Level
2
Task
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2014-03-08T21:41:59.000000000Z
EventRecordID
135580
Channel
Application
Computer
ABC-SRV-WEB01.abc.local
Security
EventData
Failed to initiate the upgrade sequence. An exception of type System.MissingMethodException was thrown. Additional exception information: Method not found: 'Void Microsoft.SharePoint.WorkflowServices.IWorkflowService.Upgrade(System.Object,
System.String, Microsoft.SharePoint.Upgrade.SPLog)'. System.MissingMethodException: Method not found: 'Void Microsoft.SharePoint.WorkflowServices.IWorkflowService.Upgrade(System.Object, System.String, Microsoft.SharePoint.Upgrade.SPLog)'. at System.RuntimeTypeHandle.GetTypeByName(String
name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type) at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError,
Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName) at System.Type.GetType(String typeName) at Microsoft.SharePoint.Utilities.SPTypeSerializer.DeserializeType(String typeName,
Guid classId, Boolean bResolveMissingTypes) at Microsoft.SharePoint.Administration.SPConfigurationDatabase.ResolveObjectAndClassVersions(SPLog log) at Microsoft.SharePoint.Upgrade.SPManager.BootStrap(Guid sessionId, SPUpgradeOperationFlags flags) at Microsoft.SharePoint.PostSetupConfiguration.UpgradeBootstrapTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
2) Second error
System
Provider
[ Name]
SharePoint 2010 Products Configuration Wizard
EventID
100
[ Qualifiers]
0
Level
2
Task
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2014-03-08T21:41:59.000000000Z
EventRecordID
135581
Channel
Application
Computer
ABC-SRV-WEB01.abc.local
Security
EventData
Configuration of SharePoint Products failed. Configuration must be performed in order for this product to operate properly. To diagnose the problem, review the extended error information located at C:\Program Files\Common Files\Microsoft Shared\Web Server
Extensions\15\LOGS\PSCDiagnostics_3_8_2014_23_41_9_710_572545016.log, fix the problem, and run this configuration wizard again.
Please advise on next steps.
How can I successfully install SP1?
Thanks,
Alex

could you please share the upgrade log file, so that we understand the error?
did you reboot your server after the installation of SP1?
also try to clear the Config cache on the servers and then try again?
you can run this command on the server its failing
Get-SPProduct -local
PSConfig.exe -cmd upgrade -inplace b2b -force -cmd applicationcontent -install -cmd installfeatures
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Problems configuring router after hard reset

I'll start with my 'vitals' ---
* WRK54G Wireless Router
* Cable internet
* Desktop computer is wired to the router
* Roku media player - wireless connection (will play my mp3s off of the computer or listen to internet radio stations)
* Tivo wirelessly connected
This morning, I tried to play some music off of my computer on the Roku media player. It would not communicate with the computer, but it would find the internet stations. After some trial and error, I tried to make the Tivo connect and it also failed to find the computer. The computer itself also could not find the internet, but the Roku was streaming music from the 'net fine. I exhausted my limited networking knowledge and decided it was time to bite the bullet and do a full restart on the router.
I turned off the computer and the router. The modem has a battery backup so I reset it and while it was booting back up, I plugged the computer into the modem. Once the computer started, the internet was up on the computer and felt encouraged. I found and ran the install disk that came with the router and followed it step by step. After getting a few more errors, I got the setup program to find the internet through the router and I could proceed to the next step. When I got to setting my time zone, an error came up that the modem could not be configured and I should hold the reset button again for 10 seconds. I felt discouraged again. I reset it, and nothing. Tried again nothing. It will not get through the guided set up, but the internet is apparently working.
I thought I would just get into the web-based set up page. I can log in with the default password and get to all of the screens, but whenever I try to save changes (whether I made any or not) the password box comes back up and the default password (or any password I tried to change it to) will make it go away.
So basically, my problems are: 1) the guided setup will not finish 2) the web-based setup will not let me make any changes because it does not recognize any password.
Thanks for any help in advance...
Chris
PS -- after I post this, I am going to reset the computer again and unplug the internet from the router just to see if I can get the web-based setup to work. I'll post the results, one way or another.
Message Edited by structuralpoke on 08-18-2007 02:01 PM

I, and others in this forum, have had problems saving Linksys router settings too. I logged into my router fine, but couldn't save the settings without a password screen coming up. No password is accepted. I contacted Linksys Help and received no solution. I looked on this forum and saw mentioned that the problem may be with Norton Internet Security (NIS). One person said they just temporarily disabled NIS and then they were able to save their router settings before reenabling NIS again. I tried that, ended up turning off every setting in my NIS, rebooting with them off, etc, but it didn't help with the ability to save my router settings. I have NIS 2007 and the NIS Add-On pack (needed because for some reason Norton took away features from previous versions and after people complained they made them available again with the add-on pack). I planned to remove all of NIS (after I made notes of my modifications), and started by removing the NIS Add-On pack first. After a reboot I tried to save my router settings and it worked! Phew. I got them all set and tested, then I installed the NIS Add-On pack again and all is well. When I saw people had made comments on this forum about this problem for 8 months at least I was disappointed that Linksys Help hadn't already been aware of the problem and able to give the solution.

CO09 wong result after EHP5 upgrade

Hello
after a EHP5 upgrade the availability check with storage locations does not work anymore.
We have stock on storage location 0001. The availability check selects sometimes also orders from storage location 0005 and calculates a wrong ATP value.
Did somebody else had this phenomenon again? Is there a solution?
Thanks in advance.
Best regards
Markus

Hi Noel,
thanks for that hint. We have already this not in our system.
The result was a simple material master data bug. The user did not type 1 into the dispo view of this material.
Best regards
Markus

Not able to open Database Configuration Assitance after installing MGT ser

I've install Oracle Grid Control Enterprises manage in sperate machine(MON1) to moniter 3 servers and I've install Oracle Management Service to get connect with MON1 server. After installation i'm not able to open Databaase configuration assitance and net configuration assitance.
Please help on this

I've found the solution for this problem. Follow this step
step 1. Before install management service copy the environment variable value of PATH in a notepad. For this Select MyComputer-> Do right click->click on advance tab->Click Environment Variables>Under System Variables you see a variables called PATH->select and click on Edit button You will get the value of PATH Value.
Step 2. Now you do Management Service installation
Step 3. Again you do the same step as STEP 1(Make sure you should do this).
Step 4. Now you copy the content which you have copy in step 1 and paste it in PATH Variable
Step 5. Now you try to open.
Step 6. Now You restore the content of PATH Variable which you have copy(STEP 3) after installation so the Management Service will work fine

Configuring FSCM after EHP5

Similar Messages

Maybe you are looking for