Configuring OAM audit database

Hi Gurus,
I am trying to configure audit database for OAM 11.1.1.5, i am following http://download.oracle.com/docs/cd/E14571_01/doc.1111/e15478/audit.htm#BABHAJCB this document.
I have created a audit database using RCU
then created a data source(Audit source) in weblogic i am able to see that data source in EM also but when i am trying to assign this data source (Audit source) in Audit store in em it is showing blanc...
Gurus please point me to right direction
Thanks
VM

It worked for me.....
Adding the Admin server for the target did the trick.....
Thanks for your time .
Regards
VM

Similar Messages

Configure Audit Database in BOBJ LCM

Hello,
Can anyone please provide me steps to configure Audit Database in BOBJ LCM?
When I goto SIA properties under configuration, I have configured Audit Database and i got message saying Audit Database completed. I have enabled AUDIT in Adaptive processing server too however when I goto properties of Audit Events I am getting message as "Auditing information is not being written to the auditing database. Please verify that the auditing data source is configured properly on the CMS".
Please guide me in solving this issue...
Thanks,
Sravanthi

Hello Stratos,
Yes, this is different oracle instance. I am tried with sysdba and i still dont see Audit tables in database. I appreciate, if you have any hints on checking the Audit tables.
How do I make sure Audit database has been created? and Could you please provide me the steps to configure Audit Database.
Thanks,
Sravanthi

Repoint Audit database in BO XI 3.1 SP3 running on Solaris Server

Hi,
We need to repoint to new Audit database in Solaris server which is running BO XI 3.1 SP3 .What steps we need to follow to do that? Do we require root privileges for that?
Really appreciate your the help
Regards,
Anshuman

Hi,
you can repoint the Audit DB but you cant move the content of the Audit DB with BO functions. If you want to move the content aswell you have to use DB functions for that. The process would look like:
1. Create the new DB
2. Create the connection to the new DB on the BOE Host
3. Run cmsdbsetup.sh to point the Audit DB to the new DB
4. Import the Audit Universe and configure the Universe connection to point to the new DB
Regards
-Seb.

Controlling Auditing database (Datawise)

Hi,
I am using BOXI R3.0, we have configured the auditing.
Is there a way we can control amount of data write in Audit database?
We need to configure such that it should keep only last 3 months data and it should remove prior data from Audit database.
Thanks for the help in advance.
Thanks,
Nimesh

This needs to be configured at database level, there is no such configuration at BO side.

"Compliance and Audit Database domain account is not valid" error

I am attempting to install MBAM 2.5 and on the configure reports page I am getting an error stating "Compliance and Audit Database domain account is not valid" when trying to specify the account. I am using the same account as the read only
access domain user specified on the Configure Databases page.
The account is not locked out and I reset the password but no dice. Any idea what is going on here? This is my second attempt at an install (removed all previous install pieces including the databases).

I had the exact same problem. I had to add the account to the local administrators group in order to proceed. The installation then informs you that the account is an administrator at the end.
I removed it from the admins group. Doesn't seem to have caused any problems. Everything is working OK.

Audit Database is not updating

Hi
our Audit data base is not updating the data in the tables. I found the Audit files created every hour greater than 0kb in the following folder.
Program Files (x86)\Business Objects\BusinessObjects Enterprise 12.0\Auditing
But this data is not updating to our tables. We are on BOXI 3.1 SP1 and SQL 2008
Please suggest

Hi,
Try checking your CMS log under <Your installationPath>\BusinessObjects Enterprise 12.0\Logging
While working with a SQL 2008 Audit database, I found the following :
"(.\AuditDatabaseSubsystem_impl.cpp:92). (false : DBConnectionHolder - (AuditDB) - Retryable error treated as lost connection error. Code 0, Msg: [Microsoft][SQL Server Native Client 10.0]String data, length mismatch)."
I created a new ODBC datasource using sqlncli (version 9.0, i.e. 2005) instead of version 10.0 and modified the datasource on the configuration tab of the SIA in the CCM
Worked for me, hope this helps.
N.

Can we change Audit Database

Is there any way to reconfigure audit database in SAP 4.0 and I m using SQL Server 2008 as my database. i just want to change Audit database in same Sql Server because by mistake i choose different database in ODBC connection.

Yes It is possible.
Go to CMC>Auditing
Under Configuration>ADS Database
Connection Name: Give a new connection name
Type: Microsoft SQL Server
User Name: your SQL server user name and password.
Save the configuration and restart the SIA. It will show such a status as displayed below, if configuration is success.

ZCM 11 SP3 auditing database

Hi there,
We am upgrading to ZCM 11 SP3. Our external database which is on MS SQL 2008 is moving to MS SQL 2012.
The dev server upgraded fine. We will create a new auditing database, but I need to know the following.
We have roughly 5000 devices, how big will this database be / grow to and can we turn off auditing once upgraded should
the database size be a problem of this feature not be needed. ?
Thanks
Mark

Ok from the audit management PDF, from what I can see, this will remain off until events are added / configured.

Problem with upgrade due to no connection to audit database

Hello everyone!
Today after work I wanted to finally upgrade ZCM but run into some problems.
We have three servers: Two primary servers and one database-server (OEM Sybase SQL Anywhere). All three are running on SLES 11.
I want to upgrade our ZCM11.2.4MU1 to ZCM11.3a and then to 11.3.1.
I started by upgrading the Sybase database and running dbunload according to the documentation.
Then I continued with "sh install.sh -c" and chose "Audit Database". I selected the OEM Sybase SQL Anywhere with port 2639.
Admin, password and database-name were unique. But I made the mistake to set the servername to the same as the zenworks-database. *sigh*
The installation completed.
The sybase-asa and sybase-audit-asa services couldn't run at the same time, therefore I rebooted the database-server and installed the audit database again with a unique database-name.
Before the upgrade I could start dbisql and connect without problems to backup the database. Now I cannot connect anymore without using the additional parameter: links=tcpip{host=IPorDNSName,port=2638}
Connecting to the Audit Database via dbisql is not possible, with the following message:
Code:
Could not connect to the database.
Database server not found
Ensure that the name in the "Server name" field is spelled correctly, that the network options on the network tab are correct and that the database server has been started.
[Sybase][ODBC Driver][SQL Anywhere]Database server not found
SQLCODE=-100
SQLSTATE=08001
Connection parameters:
User=zenauditadmin
Password=***
Server=zenworks_audit_database_server
DBN=zenworks_audit_database2
LINKS=ShMem
ENC=NONE
links=tcpip{host=<ip>,port=2639}
With that said, it is not possible to upgrade the first primary server because the setup routine is also not possible to connect to the Audit Server:
Code:
We were unable to create a connection to the database. Please check your
connection information.
Specify the existing ZENworks database and database authentication information
for an existing user with sufficient permissions.
The services sybase-asa and sybase-audit-asa are both running. I also restarted them a couple of times.
zenworks_database.conf and zenworks_database_audit.conf look fine.
Do you have any idea what I missed?
Is the duplicate servername still somewhere existend and prevents the proper running?
Thank you very much in advance for pointing me in any direction!

novellchuck wrote:
>
> Hello everyone!
>
> Today after work I wanted to finally upgrade ZCM but run into some
> problems.
>
> We have three servers: Two primary servers and one database-server
> (OEM Sybase SQL Anywhere). All three are running on SLES 11.
> I want to upgrade our ZCM11.2.4MU1 to ZCM11.3a and then to 11.3.1.
>
> I started by upgrading the Sybase database and running dbunload
> according to the documentation.
> Then I continued with "sh install.sh -c" and chose "Audit Database". I
> selected the OEM Sybase SQL Anywhere with port 2639.
>
> Admin, password and database-name were unique. But I made the mistake
> to set the servername to the same as the zenworks-database. sigh
> The installation completed.
> The sybase-asa and sybase-audit-asa services couldn't run at the same
> time, therefore I rebooted the database-server and installed the audit
> database again with a unique database-name.
>
> Before the upgrade I could start dbisql and connect without problems
> to backup the database. Now I cannot connect anymore without using the
> additional parameter: links=tcpip{host=IPorDNSName,port=2638}
>
> Connecting to the Audit Database via dbisql is not possible, with the
> following message:
>
>
> Code:
> --------------------
> Could not connect to the database.
> Database server not found
>
> Ensure that the name in the "Server name" field is spelled
> correctly, that the network options on the network tab are correct
> and that the database server has been started. [Sybase][ODBC
> Driver][SQL Anywhere]Database server not found SQLCODE=-100
> SQLSTATE=08001
> Connection parameters:
> User=zenauditadmin
> Password=***
> Server=zenworks_audit_database_server
> DBN=zenworks_audit_database2
> LINKS=ShMem
> ENC=NONE
> links=tcpip{host=<ip>,port=2639}
> --------------------
>
>
> With that said, it is not possible to upgrade the first primary server
> because the setup routine is also not possible to connect to the Audit
> Server:
>
>
> Code:
> --------------------
> We were unable to create a connection to the database. Please
> check your connection information.
>
>
> ************************************************** ********************
> ******** Specify the existing ZENworks database and database
> authentication information for an existing user with sufficient
> permissions. --------------------
>
>
> The services sybase-asa and sybase-audit-asa are both running. I also
> restarted them a couple of times.
> zenworks_database.conf and zenworks_database_audit.conf look fine.
>
> Do you have any idea what I missed?
> Is the duplicate servername still somewhere existend and prevents the
> proper running?
>
> Thank you very much in advance for pointing me in any direction!
Oh boy... and no backup?
Not sure how to get the sybase back working again... my first choice in
such a case would be to make a contact to Novell, are you able to
create an SR on this?
Niels
I have always liked... Cowabunga!
If you find this post helpful, please show your appreciation by
clicking on the star below.
A member must be logged in before s/he can assign reputation points.

Exception while running idmConfigTool.sh to configure OAM

Hi
I am configuring OAM based on the
- "Enterprise Deployment Guide for Oracle Identity Management 11g Release 1 (11.1.1.5)".
I am executing this step: "11.6.2 Configuring Oracle Access Manager by Using the IDM Automation Tool"
But I am getting an exception
idmConfigTool.sh -configOAM input_file=config_oam1.props
Enter ID Store Bind DN password :
Enter User Password for OAM11G_WLS_ADMIN_PASSWD:
Confirm User Password for OAM11G_WLS_ADMIN_PASSWD:
Enter User Password for OAM11G_IDM_DOMAIN_WEBGATE_PASSWD:
Confirm User Password for OAM11G_IDM_DOMAIN_WEBGATE_PASSWD:
Enter User Password for IDSTORE_PWD_OAMSOFTWAREUSER:
Confirm User Password for IDSTORE_PWD_OAMSOFTWAREUSER:
Enter User Password for IDSTORE_PWD_OAMADMINUSER:
Confirm User Password for IDSTORE_PWD_OAMADMINUSER:
oracle.idm.automation.exception.ExecutionFailedException: Config file does not have System ID Container Name
at oracle.idm.automation.impl.oam.handlers.OAM11gIntegrationHandler.prepareLDAPUserDN(OAM11gIntegrationHandler.java:421)
at oracle.idm.automation.impl.oam.handlers.OAM11gIntegrationHandler.configOAM11gIdStore(OAM11gIntegrationHandler.java:234)
at oracle.idm.automation.impl.oam.handlers.OAM11gIntegrationHandler.execute(OAM11gIntegrationHandler.java:839)
at oracle.idm.automation.AutomationTool.configOAM(AutomationTool.java:708)
at oracle.idm.automation.AutomationTool.parseCmdLine(AutomationTool.java:232)
at oracle.idm.automation.AutomationTool.main(AutomationTool.java:146)
There were errors found. Details have been logged to automation.log
Not sure what is missing in my IDStore
Any suggestions ?

Looks like it is complaining that there is no value for the IDSTORE_SYSTEMIDBASE parameter in the input properties file for the idmConfig tool.
Regards,
Colin

Standby database not configure while keep database files in different place

Dear Friends ,
I have to successfully configured "PHYSICAL STANDBY DATABASE" within the TWO databases ("PRIM" and "STAN" Database) when I kept datafile, controlfile and redolog files in the same location (like, "/u01/app/oracle/oradata/prim" location .
In this successful configuration , I have to add the below two lines into the initprim.ora and initstan.ora both server respectively ...
initprim.ora:
========
DB_FILE_NAME_CONVERT='/u01/app/oracle/oradata/stan','/u01/app/oracle/oradata/prim'
LOG_FILE_NAME_CONVERT='/u01/app/oracle/flash_recovery_area/stan','/u01/app/oracle/flash_recovery_area/prim'
initstan.ora:
========
DB_FILE_NAME_CONVERT='/u01/app/oracle/oradata/prim','/u01/app/oracle/oradata/stan'
LOG_FILE_NAME_CONVERT='/u01/app/oracle/flash_recovery_area/prim','/u01/app/oracle/flash_recovery_area/stan'Now , in second scenario , I have to change Primary database server's datafile, controlfile and redolog file in the below folder :
controlfile --> "/u01/app/oracle/oradata/prim/ctrlfile"
redologfile --> "/u01/app/oracle/oradata/prim/redofile"
datafile --> "/u01/app/oracle/oradata/prim/datafile"
Similarly I have to create same folder in my STAN database server accordingly . and also add the above lines in same way :
initprim.ora:
========
DB_FILE_NAME_CONVERT='/u01/app/oracle/oradata/stan','/u01/app/oracle/oradata/prim'
LOG_FILE_NAME_CONVERT='/u01/app/oracle/flash_recovery_area/stan','/u01/app/oracle/flash_recovery_area/prim'
initstan.ora:
========
DB_FILE_NAME_CONVERT='/u01/app/oracle/oradata/prim','/u01/app/oracle/oradata/stan'
LOG_FILE_NAME_CONVERT='/u01/app/oracle/flash_recovery_area/prim','/u01/app/oracle/flash_recovery_area/stan'Keeping the above situation when I run the below command in STAN database server :
[oracle@test ~]$ sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Nov 15 23:15:43 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn / as sysdba
Connected to an idle instance.
SQL> startup mount
ORACLE instance started.
Total System Global Area 599785472 bytes
Fixed Size 1220772 bytes
Variable Size 163581788 bytes
Database Buffers 427819008 bytes
Redo Buffers 7163904 bytes
Database mounted.
SQL> alter database recover managed standby database disconnect from session;
Database altered.
The Command execute successfully but in the alert log of the STAN database server ,I get the below error :
Completed: alter database recover managed standby database disconnect from session
Mon Nov 15 22:46:52 2010
Clearing online redo logfile 1 complete
Mon Nov 15 22:46:52 2010
Errors in file /u01/app/oracle/admin/stan/bdump/stan_mrp0_3695.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: '/u01/app/oracle/oradata/prim/redofile/redo02.log'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Mon Nov 15 22:46:52 2010
Errors in file /u01/app/oracle/admin/stan/bdump/stan_mrp0_3695.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: '/u01/app/oracle/oradata/prim/redofile/redo02.log'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3But I already created the above mention folder "'/u01/app/oracle/oradata/prim/redofile" successfully and the redo log files are also created there successfully , but I cannot understand why this error is showed ? And also no archivelogs are shifted from PRIM database server to STAN database server .
Would u plz suggest me , why I cannot configure Physical Standby Database when I keep my database fles in the separate location ?
help me plz ... ...

Hi,
I'm missing the steps you took renaming/moving the files on the primary.
Since the location of datafiles is stored in the control file the controlfile of the standby might not know the new location yet.
I suggest you read this http://www.cs.bris.ac.uk/maintain/OracleDocs/server.816/a76995/standby.htm#23603 and see if that helps
Success,
FJFranken

Message (on one account) when logging in: The user account running the Configuration Manager console has insufficient permissions to read information from the Configuration Manager site database.

After installing the reportservice/database i cannot use the Configuration Manager Console 2012 anymore with my own AD account. (The accounts of my colleagues are stil working)
When i login i get the following message:
The user account running the Configuration Manager console has insufficient permissions to read information from the Configuration Manager site database. The account must belong to a security role in Configuration Manager. The account must also have
the Windows Server Distributed Component Object Model (DCOM) Remote Activation permission for the computer running the Configuration Manager site server and the SMS Provider.
I checked the following:
I am a administrative user in SCCM (Full Administrator)
I am a member of the administrator group on the server
Deleted HKEY_CURRENT_USER\Software\Microsoft\ConfigMgr10
I tried to start it on multiple workstations and deleted my roaming profile
Any more suggestions?

Hi,
Maybe you could have a look on the below blog.
http://blog.nimbo.com/how-to-disable-user-account-control-in-windows-server-2012/
(Note: Microsoft provides third-party contact information to help you find technical support. This contact information
may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.)
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Golden Gate configuration with 12c Database

Hi,
I have a requirement to configure the golden gate with oracle database 12c with container database.
Versions:
Golden Gate - 12.1.2.1.0
Oracle Database - 12.1.0.2
Here we need to configure with container database and two pluggable database.
Kindly suggest me the steps for configuration.
Regards
Kumar

Hello Kumar,
I think you need to do the same setup as other GG versións :
1. Install Golden Gate software on extract/replicat sites
2. Create GG User with the necesary privs.
3. Set Min Logging level at database level.
4. Set TRANDATA for the tables that you like capture changes
After, you need analyze the objects that you need replicate and define the capture process.
To use GG on a MultiTenant Database, you need define at extract level the PDBs and the objects that you need extract. Remeber that in a Multi-tenant enviorment, only a set of redo logs exists,then the capture process is Multi-Tenant aware, because allow
set the PDB and the schema and the objects that you like capture. It is called qualified three-part name, PDB.SCHEMA.TABLE
Example:
SOURCECATALOG FINANCE TABLE SAP.*; ---> Source is the way to inlcude the PDB
TABLE REPORTS.*;
SOURCECATALOG HR TABLE SIEBEL.*;
TABLE REPORTS.*;
SOURCECATALOG MFG
TABLE CUSTOMER.ORDERS;
TABLE REPORTS.*;
TABLE HQ.LOCATIONS.*;
In this example, Extract captures the following:
All tables in the SAP and REPORTS schemas in the FINANCE PDB.
All tables in the SIEBEL and REPORTS schemas in the HR PDB.
All tables in the CUSTOMER and REPORTS schemas in the MFG PDB.
For the last TABLE statement, Extract captures all tables in the LOCATIONS schema in the HQ PDB. This statement is a fully qualified three-part name and overrides the previous SOURCECATALOG specification.
You have more info at : http://docs.oracle.com/goldengate/1212/gg-winux/GWURF/gg_parameters147.htm
Also, you have a dedicated chapter of using GG in a Multi-Tenant env at: https://docs.oracle.com/goldengate/1212/gg-winux/GIORA/config_containerdb.htm#BDCFDFDE
I hope help.
Regards
Arturo

Configuration assistant "Oracle Database Configuration Assistant" failed

I install oracle 10g on HP UX 11.23. I got this error :
hecking for PHSS_33278; found Not found.     Failed <<<<
Checking for PHSS_33279; found Not found.     Failed <<<<
Checking for PHSS_33277; found Not found.     Failed <<<<
Checking for PHSS_33279; found Not found.     Failed <<<<
, my first question :
can i pass this step, ?
after all, my installation form is okey, but everything change become nightmare.
I installation failed on Configuration Assistant :
Configuration assistant "Oracle Database Configuration Assistant" failed
OUI-25031:some of the configureation assistants failed. it is strongly recommended that you retry configuration assistants at this time. not successfully running any "recommended" assistants means your system will not be correctly configured.
1. check the details panel on the configuration assistant screen to see the error resulting in the failures
2. fix the errors causing these failures
3. select the failed assistants and click the retry button to retry the
Configuration assistant "Oracle Database Configuration Assistant" failed
The "/oracle/OraHome_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------

But i still get this error. Do you have solution for this ?
I installation failed on Configuration Assistant :+
Configuration assistant "Oracle Database Configuration Assistant" failed+
OUI-25031:some of the configureation assistants failed. it is strongly recommended that you retry configuration assistants at this time. not successfully running any "recommended" assistants means your system will not be correctly configured.+
*1. check the details panel on the configuration assistant screen to see the error resulting in the failures*
*2. fix the errors causing these failures*
*3. select the failed assistants and click the retry button to retry the*
Configuration assistant "Oracle Database Configuration Assistant" failed The "/oracle/OraHome_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------+
Edited by: user9198604 on Feb 25, 2010 3:37 AM

Audit database. config auditing data source (DB2)

Hello expert,
I want to enable audit database for Business Object and I has followed the admin guide but not work.
I install Business Object enterprise XI 3.1 on AIX 5.3 .
When I installed BO ,I choose 'Use an existing database' and choose DB2. (The same database of SAP BW database)
And when the installation require the information of CMS and Audit database, I fill the same db alias as SAP BW database.
So now I has SAPBW , CMS and Audit data in the same database.
After installation I saw the CMS table in "DB2<aliasName>" schema.
But can not find the Audit table.
Does the audit table will create after installation?
Then I try to enable the audit database using cmsdbsetup.sh and I choose 'selectaudit' and fill in the information that it require.
Then it finish with no error.
"Select auditing data source was successful. Auditing Data Source setup finished."
But I still can not find any audit table in the database.
I run serverconfig.sh and I can't see the Enable Audit option when I choose 'modify a server'.
Any idea?
Thanks in advance.
Chai

Hello,
Thanks for your reply.
It is not a BO cluster.
And a log detail when select audit data source is show as below
Wed Nov 17 2010 10:17:02 GMT+0700 (THAIST) /bodev/bobje/setup/jscripts//ccmunix.js started at Wed Nov 17 2010 10:17:02 GMT+0700 (THAIST)
Wed Nov 17 2010 10:17:02 GMT+0700 (THAIST) About to process commandline parameters...
Wed Nov 17 2010 10:17:02 GMT+0700 (THAIST) Finished processing commandline parameters.
Wed Nov 17 2010 10:17:02 GMT+0700 (THAIST) Warning: No password supplied, setting password to default.
Wed Nov 17 2010 10:17:02 GMT+0700 (THAIST) Warning: No username supplied, setting username and password to default.
Wed Nov 17 2010 10:17:02 GMT+0700 (THAIST) Warning: No authentication type supplied, setting authentication type to default.
Wed Nov 17 2010 10:17:02 GMT+0700 (THAIST) Warning: No CMS name supplied, setting CMS name to machine name.
Wed Nov 17 2010 10:17:02 GMT+0700 (THAIST) Select auditing data source was successful.
Wed Nov 17 2010 10:25:22 GMT+0700 (THAIST) /bodev/bobje/setup/jscripts//ccmunix.js started at Wed Nov 17 2010 10:25:22 GMT+0700 (THAIST)
Wed Nov 17 2010 10:25:22 GMT+0700 (THAIST) About to process commandline parameters...
Wed Nov 17 2010 10:25:22 GMT+0700 (THAIST) Finished processing commandline parameters.
Wed Nov 17 2010 10:25:22 GMT+0700 (THAIST) Warning: No password supplied, setting password to default.
Wed Nov 17 2010 10:25:22 GMT+0700 (THAIST) Warning: No username supplied, setting username and password to default.
Wed Nov 17 2010 10:25:22 GMT+0700 (THAIST) Warning: No authentication type supplied, setting authentication type to default.
Wed Nov 17 2010 10:25:22 GMT+0700 (THAIST) Warning: No CMS name supplied, setting CMS name to machine name.
Wed Nov 17 2010 10:25:22 GMT+0700 (THAIST) Select auditing data source was successful.
And the CMS log file did not show any error.
Additional detail:
- My BW and BO are in the same server.
- I already grant all the rights to the user who relate to audit database.
- My BW and BO are in the same database.
- There is no audit table appear in the database.
- No Fix pack installed.
I wonder why BO audit connection did not see my database.
(In case of DB2, I think the db2 alias name is the same name of the database name (as default).
So if my database name is BWD then the database alias name should be BWD, am I right?)
Any idea?
Thanks in advance.
Chai

Configuring OAM audit database

Similar Messages

Maybe you are looking for