Configuring RPC dynamic port allocation

I'm getting RPC errors to a Windows 2003 server:
0x800706ba
Win32
The RPC server is unavailable
I've verified the RPC, TCP/IP Netbios Helper, Windows management Instrument services are started on the 2003 box. From the same 2003 box I am able to run wmimgmt.msc and view it's wmi properties. However, I get the RPC error above when I run the WBEMTEST
from a client on another domain. I also get the same error when I run wmimgmt.msc using the same remote client to access the 2003 box. I came across the microsoft KB: https://support.microsoft.com/en-us/kb/154596
Would I just configure that port range on the 2003 box's registry? At this point I'm leaning that maybe it's a firewall issue but not sure.

Hello,
first check with the article
https://technet.microsoft.com/en-us/library/dd772723%28WS.10%29.aspx?f=255&MSPPError=-2147217396 that all AD required ports are open.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Similar Messages

Does APPS have dynamic port allocation going on somewhere

Hi Gurus,
We have a situation where 5 Test instances of Ebiz all reside on the same server. The production Instance has its own dedicated server.
We seem to get intermittent, but frequent problems with some of the test environments taking the ports which are defined for other environments in the xml file.
This issue Never occurs in production
All environments services are restarted every night - most of the time there is no problem. But sometimes, web, forms, apps listner or concurrent managers wont start - an they give errors due to locked ports.
When I run a netstat -anp | grep <port> - the output shows that one of the other environments is listening on the port in question.
I have made absolutley sure that in the xml files and httpd.conf etc - each environment has its distinct port set (which it does)
I have searched for ages on google and metalink to try to find information about dynamic ports but cant find any
Can anyone help?
Thanks

Hey Oli, no help here I'm afraid just wanted to say I am experiencing a similar problem although mine is a situation where I have e-Biz and OAS installed. The seem to co-exist peacefully most of the time but our app also restarts every night and some mornings the app is not available. Recently it was fixed by shutting down the OAS server and restarting.
So no resolution yet but I feel your pain. I was just starting to look into how I would use netstat to help my troubleshoot and also look at net.ipv4.ip_local_port_range set in /etc/sysctl.conf.

Dynamic Port Allocation Using OPMN

I wanna use jrockit mission control to monitor a java application which is running in 8 oc4j instances controlled by opmn. I included the -Xmanagement:ssl=false,authenticate=false,autodiscovery=true,port=7091 in the oc4j startup command line in opmn.xml but i need that opmn dynamically change the port part of the command using a range of predefined ports, just like opmn does for oc4j rmi, jms, ajp ports. Is that possible? Can I define a custom port range in opmn.xml and user the port id as a variable in oc4j's startup command line? Any help is more than appreciated

In addition to the above, the following was taken from D:\Hyperion\logs\BIPlus\FRClient.log on the client machine after the error occurred:
08-12 10:04:38 ERROR HRResourceBundleFactory Could not locate registry
08-12 10:04:38 ERROR HRResourceBundleFactory 5500
com.hyperion.reporting.util.HyperionReportException: Server not yet configured. Please configure the server.
at com.hyperion.reporting.config.ConfigResourceBundle.<init>(Unknown Source)
at com.hyperion.reporting.config.ConfigResourceBundle.getInstance(Unknown Source)
at com.hyperion.reporting.config.HRResourceBundleFactory.getConfigBundle(Unknown Source)
at com.hyperion.reporting.config.HRResourceBundleFactory.getInstance(Unknown Source)
at com.hyperion.reporting.registry.FRSystem.getReportServerNames(Unknown Source)
at com.hyperion.reporting.registry.FRSystem.removeReportServerFromLocalCache(Unknown Source)
at com.hyperion.reporting.registry.FRSystem.unregisterFRComponentAtRemoteRegistry(Unknown Source)
at com.hyperion.reporting.registry.FRSystem.pickRandomServer(Unknown Source)
at com.hyperion.reporting.registry.FRSystem.lookup(Unknown Source)
at com.hyperion.reporting.registry.FRSystem.lookupHsServer(Unknown Source)
at com.hyperion.reporting.javacom.HsServer.getServer(Unknown Source)
at com.hyperion.reporting.javacom.HsHelper.getServer(Unknown Source)

Can you configure a static port to use with certsrv.msc?

I am trying to use certsrv.msc to connect from my workstation to the CA for administration purposes. Workstation is Win7, CA is 2008 R2 Enterprise running Enterprise Subordinate on a dedicated box.
I configured a static DCOM port for certsvc by following this article, including bouncing the service and also rebooting the CA box:
http://social.technet.microsoft.com/wiki/contents/articles/1559.how-to-configure-a-static-dcom-port-for-ad-cs.aspx
The static port was opened in the firewall from my workstation to the CA. We also found that TCP 445 was required, so that has been opened as well, port 135 & other ports normally needed for autoenrollment should be open. Sniffing the firewall
showed that a random high numbered port that is not the static dcom port is being attempted - this is the only port showing dropped packets & no traffic on the static port.
I am wondering if there is a way to configure a static port for this high-level random port to use with certsrv.msc as I was able to do with the certsvc dcom port? I am trying to avoid having tens of thousands of network ports wide open going to my
CA... Thanks in advance!

Hi Steve,
I am sorry that I wasn’t able to find references about restricting certificate services only use one port in the random port range.
However, we can configure RPC dynamic ports allocation to restrict port range. In the meantime, we should keep at least 100 ports open to keep necessary system services running.
More information for you:
How to configure RPC dynamic port allocation to work with firewalls
http://support.microsoft.com/kb/154596/en-us
Service overview and network port requirements for Windows
http://support.microsoft.com/kb/832017/en-au
Firewall Rules for Active Directory Certificate Services
http://blogs.technet.com/b/pki/archive/2010/06/25/firewall-roles-for-active-directory-certificate-services.aspx
Best Regards,
Amy Wang

RPC High Ports

Hello,
We are migrating from Win 2003 R2 DC infra to Win 2012 R2. I Have the following registries configured on the Win 2003 R2 DC.
RPC dynamic port allocation - KB154596      (Only allow
ports 10002 - 10200 for RPC from other machines)
Locate and then click the following key in the registry:
HKEY_LOCAL_MACHINE\Software\Microsoft\Rpc\
Create a New Key = Internet
Locate and then click the following key in the registry:
HKEY_LOCAL_MACHINE\Software\Microsoft\Rpc\Internet\
Add the values
"Ports" (MULTI_SZ)                            =          10002-10200
"PortsInternetAvailable" (REG_SZ)       =          Y
"UseInternetPorts" (REG_SZ)               =          Y
I wonder such a registry requirements exists for Win 2012 R2 as well?

Hi,
I didn't find any documented information. But personally I think this will still work.
I recommend you test before deploy it. If you have any problem during the test, please feel free to let us know.
Thank you.

Sql server 2012 express - tcp/ip connection to named instance using dynamic port not working

I have a named instance on a SQL 2012 Express server that won't connect via TCP/IP when wanting to connect off of the dynamic port. I can connect via shared memory locally on the server.   I can connect to the namespace when specifying the
dynamic port listed in the configuration manager.
This is the only named instance on the server and it is not the default.
TCP/IP is enabled
Allow Remote connections is enabled
the server browser service is running
I can connect via the dynamic port number
I am testing the connection locally on the server, so I don't believe a firewall is the issue. I get the same results if I test it from a remote computer.
When using the sqlcmd (sqlcmd -S tcp:SQLSRVR\NAMEINST -E) I get the message that "the requested protocol isn't supported [xfffffffff]".   The command (sqlcmd -S tcp:SQLSRVR\NAMEINST,59992 -E) works.
Through SSMS, I get the message "the connection was actively refused".
On other boxes, I can connect with the named instance without having to specify the port.
I have looked through the sql logs and nothing much shows up. The log does show that is listening on the port # for ipv4 and ipv6.   There is also a line in there talking about the SPN not being registered and not to worry about it if
you are not using Kerberos. I logged in through shared memory and it said I was using NTLM.
Any help would be appreciated.
thanks.

Hi clw,
I’m writing to follow up with you on this post. According to your description, I do a test, if you configure the database engine to listen on a specific TCP port (59992), and
the port is opened in the firewall. If you want to connect to the SQL Server instance, you 'd better to
use the port number.
In my opinion, by default, the default instance of the Database Engine uses port 1433, usually, if you have configured the server to listen on a non-default port number, when an instance of SQL Server uses dynamic port allocation, the connection string that
is built at the SQL Server client does not specify the destination TCP/IP port unless the user or the programmer explicitly specifies the port. Therefore, the SQL Server client library queries the server on UDP port 1434 to collect the information about the
destination instance of SQL Server.
If UDP port 1434 is disabled, the SQL Server client cannot dynamically determine the port of the named instance of SQL Server. Therefore, the SQL Server client may be unable to connect to the named instance of SQL Server. In this situation, the SQL Server
client must specify the dynamically allocated port where the named instance of SQL Server is listening.
For more information about configuring an instance of SQL Server to listen on a specific TCP port or dynamic port, you can review the following article.
https://support.transfrm.com/entries/503111-How-to-configure-an-instance-of-SQL-Server-to-listen-on-a-specific-TCP-port-or-dynamic-port
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support

Dynamic port configured for FILE adapter is not working

Hi,
I have a simple dynamic port in an orchestration that writes a file to a file location. Here is the configuration
================
FilePort(Microsoft.XLANGs.BaseTypes.Address) = "FILE://c:\\TestFolder\\Out";
FilePort(Microsoft.XLANGs.BaseTypes.TransportType) = "FILE";
================
When I run this orchestration, the dynamic port does not write the file to the folder, however I does not show any error either. It is always in "Ready to Run" state where the message is "Queued Awaiting".
I tried all sorts of combinations like FILE:// FILE:\\ File: file:// file:\\ etc... and also without the moniker, just c:\.... I get the same problem.
when I use a static port(subscribed to the same message) it works fine. When I use a static port ALONGWITH this dynamic port then both works fine !!! I receive 2 files.
but when I use only dynamic port it does not work!!
Anybody knows how to solve it.
THANKS IN AVANCE
PLEASE HELP
Surya

It could be becasue you 're not passing in the file name, Try something like this..
SndPort_Dynamic(Microsoft.XLANGs.BaseTypes.Address)=@"file://C:\Test\Try\Out\Test1.xml";
But even when you don't pass the file name, i was expecting the erro to be like:
The FILE send adapter cannot open file C:\TestFolder\Out\ for writing.
Details: The system cannot find the path specified.
But try with File Name and restart the host instance after the change.
Or use somehting like this:
FilePort(Microsoft.XLANGs.BaseTypes.Address)=@"file://C:\Test\Try\Out\\%MessageID%.xml";
FilePort(Microsoft.XLANGs.BaseTypes.TransportType) = "File";
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful.

How to configure SMTP dynamic send port?

Hi,
I am trying to configure STMP send port to send emails, enabled SMTP Server on the DEV box and configured it as described in the link below.
https://sandroaspbiztalkblog.wordpress.com/2013/05/09/biztalk-2013-installation-and-configuration-install-and-configure-smtp-server-feature-part-4/
Able to send emails using Telnet client, and these email get stored in C:\inetpub\mailroot\Queue folder.
I have a dynamic send with following values.
msgEMail(SMTP.CC) = “[email protected]”;
msgEMail(SMTP.DeliveryReceipt) = False;
msgEMail(SMTP.From) = “[email protected]”;
msgEMail(SMTP.ReadReceipt) = False;
msgEMail(SMTP.Password) = “XXX;
msgEMail(SMTP.Username) = “DDD”;
msgEMail(SMTP.SMTPAuthenticate) = System.Convert.ToUInt32(XX.SMTPAuthenticate);
msgEMail(SMTP.SMTPHost) = “smtp.domain.local”;
msgEMail(SMTP.Subject) = “sdfgdfgd;
msgEMail(SMTP.MessagePartsAttachments) = 2;
Message gets suspended with the following error message.
A message sent to adapter "SMTP" on send port "XXX_DynamicSendPort_XXXX" with URI "mailto:
[email protected]" is suspended.
Error details: There was a failure executing the send pipeline: "Microsoft.BizTalk.DefaultPipelines.XMLTransmit,
Microsoft.BizTalk.DefaultPipelines, Version=3.0.1.0, Culture=neutral, PublicKeyToken=81bf3856ad764e35" Source: "XML assembler" Send Port: "XXX_DynamicSendPort_XXXXX URI: "mailto:localhost" Reason: Data at the root level is invalid.
Line 1, position 1.
MessageId:
{3C50F418-24C4-4661-9B34-4B7F5F6FBBA4}
InstanceID: {2F6B9A0E-92EE-4953-81D2-9A124FAC99CE}
Please can some advise me what is wrong here? do you think I have configured
msgEMail(SMTP.SMTPHost) property correctly? Or should it be the name of the DEV box?
Thanks
SS
Shiva Sadayan

Hi Shiva,
You should not be using XMLTransit pipeline at the send port.
Perhaps you should go with default passthrough pipeline or
Create a send pipeline with MIME/SMIME encoder and drop it at Encode section of pipeline. Accept the default settings for MIME/SMIME encoder and use it with the dynamic port.
I found this article very useful while sending email from BizTalk. Refer:
Sending Emails in Biztalk
Rachit
Please mark as answer or vote as helpful if my reply does

Dynamic port assignments

hi all. if my question can be answered by reading TMG documentation, feel free to direct me there (i tried searching for the admin documentation but couldn't find it).
can someone tell me what the purpose of dynamic port assignment is from endpoint -> TMG? Once the traffic leaves the TMG -> Internet, the actual service port is being used but that doesn't help me for internal queries.
many thanks,
-P

Hi,
Please check the articles below.
ISA/TMG Server
Application protocol
Protocol
Ports
Configuration Storage (domain)
TCP
2171 (note 1)
Configuration Storage (replication)
TCP
2173 (note 1)
Configuration Storage (workgroup)
TCP
2172 (note 1)
Firewall Client Application
TCP/UDP
1025-65535 (note 2)
Firewall Client Control Channel
TCP/UDP
1745 (note 3)
Firewall Control Channel
TCP
3847 (note 1)
RPC
TCP
135 (note 6)
Randomly allocated high TCP ports (note 6)
TCP
random port number between 1024 - 65535
random port number between 10000 - 65535 (note 7)
Web Management
TCP
2175 (note 1, 4)
Web Proxy Client
TCP
8080 (note 5)
Collapse this imageExpand this image
Notes
This port is not used with ISA 2000.
FWC application transport and protocols are negotiated within the FWC control channel.
ISA 2000 FWC control uses UDP. ISA 2004 and 2006 use TCP.
OEM uses Firewall Web Management to provide non-MMC management of ISA Server.
This port is also used for intra-array traffic.
This port is used only by the ISA management MMC during remote server and service status monitoring.
This is the range in TMG. Please note that TMG extends the default dynamic port ranges in Windows Server 2008 R2, Windows 7, Windows Server 2008, and Windows Vista.
https://support.microsoft.com/kb/832017?wa=wsignin1.0#method14
Reference:
TCP connection established using Firewall client may close unexpectedly
Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

How can i configure a dynamic dns at a time machine

Hi All,
I have a time machine at home, with Airport Utility version 6.1.
I'm currently trying to configure a dynamic dns at the airport itself but I don't have any luck in finding the functionality to do so. Couple of questions:
1) Do I really have to install the previous versions 5.6 Airport Utility to configure DDNS?
2) I assume if I can't use the previous versions of Airport Utility then I would need to use a Dynamic Update Client. My No-IP Dynamic Update Client doesn't seem to be running on MAC OS X Mountain Lion. Is there any other developers that provides a domain for free and the DUC is actually working on OS X Mountain Lion? (E.g. I heard that DysDNS doesn't provide an entirely free service anymore)

I think you mean Time Capsule not time machine.. TC is the hardware .. TM is the software backup program in the computer and has nought to do with DDNS.
There is no DDNS client in the TC.. never has been. Apple must have some private system for icloud to work.. but no access is allowed to it by users. As with all things apple it is designed to ensure you are able to use icloud or nothing.
I am not on ML or even Lion.. good old SL is fine to me.. and far better networking.
I presume some of the dyndns providers will offer a client for ML now..
All of the free services are trying to sell you something.. and constantly harras you.. no free lunch in this world.
The easiest method and to escape the upgrade cycle.. just get another router.. almost every router in the world provides several dyndns clients built in. The router is where this should be done. so the computer can stay off. Just bridge the TC and port forward to it. Simple and cheap.

Using BC4J Session Bean in OC4J 10.1.3 with dynamic ports

Hi Folks!
I've benn having trouble connecting my BC4J Session Bean to an Oracle 10gAS R3 server instance tha uses dynamic ports.
After migrating a BC4J/Struts/JSP application from 9iAS to 10gAS R3, I'm trying to connect from a client application to my instace in the server. The problem is that the instance uses dynamic ports, and whenever I deploy my application to the server, I've got to update the port number in the bc4j.xcfg file in the client application, wich has became impossible to maintain.
When I connect to an EJB in the same server, I use the instance name instead of the port number. However, when I do the same with BC4J, I get the following exception:
javax.naming.NamingException [Root exception is java.lang.NumberFormatException: For input string: "OC4J_dvt20"]
     at oracle.jbo.client.remote.ejb.ias.AmHomeImpl.remoteLookup(AmHomeImpl.java:131)
     at oracle.jbo.client.remote.ejb.ias.AmHomeImpl.getRemoteApplicationModuleHome(AmHomeImpl.java:42)
     at oracle.jbo.client.remote.ejb.AbstractApplicationModuleHomeImpl.lookupUsingPlatformContext(AbstractApplicationModuleHomeImpl.java:82)
     at oracle.jbo.client.ejb.ApplicationModuleHomeImpl.<init>(ApplicationModuleHomeImpl.java:52)
     at oracle.jbo.client.remote.ejb.AbstractApplicationModuleHomeImpl.<init>(AbstractApplicationModuleHomeImpl.java:35)
     at oracle.jbo.client.remote.ejb.ias.AmHomeImpl.<init>(AmHomeImpl.java:35)
     at oracle.jbo.client.remote.ejb.ias.InitialContextImpl.createJboHome(InitialContextImpl.java:28)
     at oracle.jbo.common.JboInitialContext.lookup(JboInitialContext.java:77)
     at javax.naming.InitialContext.lookup(InitialContext.java:347)
     at oracle.jbo.common.ampool.DefaultConnectionStrategy.createApplicationModule(DefaultConnectionStrategy.java:136)
     at oracle.jbo.common.ampool.DefaultConnectionStrategy.createApplicationModule(DefaultConnectionStrategy.java:80)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.instantiateResource(ApplicationPoolImpl.java:2468)
     at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:536)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.prepareApplicationModule(ApplicationPoolImpl.java:2094)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:1961)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:2793)
     at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:453)
     at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:424)
     at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:419)
     at oracle.jbo.client.Configuration.getApplicationModule(Configuration.java:1546)
     at oracle.jbo.client.Configuration.createRootApplicationModule(Configuration.java:1504)
     at oracle.jbo.client.Configuration.createRootApplicationModule(Configuration.java:1476)
     at pkg.TesteEjbMCT.findTLS(TesteEjbMCT.java:98)
     at pkg.TesteEjbMCT.main(TesteEjbMCT.java:51)
My question is: is there a way to configure my bc4j.xcfg, or another way to connect, in order to skip the use of the port number? Or a way to get the port number from the server before I connect?
Thanks in advance!!!

I've just found the solution from Steve Muench weblog, always useful by the way!
You can find the solution at this link http://radio.weblogs.com/0118231/stories/2004/05/07/handcodingDynamicDiscoveryOfEjbdeployedAppmodule.html
In summary, we need to use the class com.evermind.server.rmi.RMIInitialContextFactory, which supports dynamic lookup, and implement the lookup ourselves.
The code I've written to lookup the service is listed below:
public static ApplicationModule getAppModuleManutencao() {
try {
Context ctx = getContext();
ManutencaoFacadeHome home = (ManutencaoFacadeHome) ctx.lookup(EJB_MANUTENCAO_BEAN_NAME);
ApplicationModule am = ApplicationModuleProxy.create(home, null);
return am;
} catch (NamingException nex) {
nex.printStackTrace();
return null;
private static InitialContext getContext() {
try {
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY, "com.evermind.server.rmi.RMIInitialContextFactory");
env.put(Context.SECURITY_PRINCIPAL, "admin");
env.put(Context.SECURITY_CREDENTIALS, "welcome");
env.put(Context.PROVIDER_URL, "opmn:ormi://dsv008:OC4J_dvt20/mct");
env.put(Context.SECURITY_AUTHENTICATION, "simple");
return new InitialContext(env);
}catch (NamingException e) {
e.printStackTrace();
return null;
I hope this helps someone!!!
Cheers!

Dynamic ports and firewall?

Hello:
I'm running a firewall and want to back it up using OSB. I'm trying to find out the range of dynamic ports that OSB uses (in addition to 400 and 10000) so I can open them up.
I can't find it anywhere in the documentation. I only find this reference as part of the Windows installation section:
If your Windows host is protected by a firewall, the firewall must be configured to permit Oracle >Secure Backup daemons on the host to communicate with the other hosts in your administrative >domain. Oracle Secure Backup includes daemon components that listen on ports 400 and 10000, >as well as other dynamically assigned portsWe can allow full access from our backup server to all ports on the firewall, but that is NOT a preferred solution! :-)
Thanks!

The range of port numbers should be above 20,000 but below 32,000 (ie 20,000 - 20,024) in addition to ports 400 and 10000.
The number of ports needed is calculated by multiplying the # of concurrent OSB activities by 5. Or, by the # of tape drives (inside the firewall) and the # of clients (outside the firewall).
Steps:
1) On Firewall, open desired range of ports plus 400 and 10000.
2) Edit the /etc/services file on both the admin host and the client to use:
ob-daemon-low <port low #>/tcp
ob-daemon-high <port high #>/tcp
These parameters are based on ports you select for OSB (from step #1 above).

Problem in dynamic memory allocation

Hi,
My name is Ravi Kumar. I'm working on a project to improve organizational performance which include visual studio for simulation. I'm using dynamic memory allocation to allocate space for the array that are used in the program. Now I have run-time error
which I can't understand where it is going wrong. Can someone please help me regrading this issue.
If anyone interested in helping please leave a comment with your email id so that I will share the whole project folder.
Thanks,
Ravi

Hi Ravi,
Don is right that this is the forum to discuss questions and feedback for Microsoft Office client.
Please post in MSDN forum of Visual Studio, where you can get more experienced responses:
https://social.msdn.microsoft.com/Forums/en-US/home?forum=visualstudiogeneral
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Dynamic IP allocation by Radius server

Hi community,
Can Cisco Radius server allocation different IP pools for requests from difference source IP addresses but having the same username/ password information? We have multiple GGSNs using dynamic IP allocation by Radius server. In Radius server, we configure username is subscriber's MSISDN. So we face a situation that a subscriber can go through any GGSN but for different GGSN, Radius server return different IP pools, even for the same subscriber. Is it possible?
Thanks and regards,
Hieu

I'm not sure if the Autonomous APs have the option for AAA Override. On the WLC, I can go into the BSSID, Security, Advanced, and there's a checkbox that I would check to allow a Radius server to send back the VLAN.
I did a little research and it looks like the 1300 may give this option but instead is defined as "VLAN Override". I've found the release notes for 12.3(7)JA5 (not sure what version you're running) that give mention and a link to configuring EAP on page 4: http://www.ciscosystems.ch/en/US/docs/wireless/access_point/1300/release/notes/o37ja5rn.pdf
Hope this helps

ERROR OGG-01201 Error reported by MGR : No available dynamic port entries

Dear All,
I have configured Golden Gate for MySQL on Linux machine.
All my extracts and replicats were running fine but suddenly the initial load extract have started trowing this error:
*2013-02-25 14:30:08 ERROR OGG-01201 Error reported by MGR : No available dynamic port entries.*
*2013-02-25 14:30:08 ERROR OGG-01668 PROCESS ABENDING.*
This is the same configuration that was working fine for many days:
GGSCI>ADD EXTRACT exp1, SOURCEISTABLE
GGSCI>INFO EXTRACT *, TASKS
GGSCI>edit params exp1
EXTRACT exp1
SOURCEDB db@localhost:3306, USERID "******", PASSWORD "******"
RMTHOST 10.168.20.31, MGRPORT 7809
RMTTASK REPLICAT, GROUP imp1
TABLE netfors.edr;
--on 31
GGSCI>ADD REPLICAT imp1, SPECIALRUN
GGSCI>edit params imp1
replicat imp1
USERID user, PASSWORD password
SOURCEDEFS /u01/app/oracle/oradata/GG/dirdef/edr.def
DISCARDFILE /u01/app/oracle/oradata/GG/dirrpt/imp1.dsc, PURGE
HANDLECOLLISIONS
MAP "db.edr", TARGET db.SDR_TBLICPRAWEDR, COLMAP (usedefaults,
ICPRE_RAWEDRID=seqno,
ICPRE_SENDER=sender,
ICPRE_RECEIVER=receiver,
ICPRE_ICCARRIERID=incoming,
ICPRE_OGCARRIERID=outgoing,
ICPRE_QUEUE=queue,
NE_ELEMENTID=18,
ICPRE_CREATETIME=createtime,
ICPRE_TIMEOFDAYBEGIN=timeofdaybegin,
ICPRE_TIMEOFDAYEND=timeofdayend,
ICPRE_UPDATETIME=updatetime,
ICPRE_STATE=state,
ICPRE_MODE=mode,
ICPRE_BATCHID=batchid,
ICPRE_REFERENCE=reference,
ICPRE_MSG_REFERENCE=msg_reference,
ICPRE_SEGMENT=segment,
ICPRE_CSMSID=csmsid,
ICPRE_GMSC=gmsc,
ICPRE_IMSI=imsi,
ICPRE_SMPP_MESSAGE_ID=smpp_message_id,
ICPRE_RETRIES=retries,
ICPRE_ELOCATION=elocation,
ICPRE_ECODE1=ecode1,
ICPRE_ECODE2=ecode2,
ICPRE_FLAGS=flags);
Kindly help to resolve this issue.
Thanks, Imran

Thanks for your reply and time Kamal.
When i run :
GGSCI (smsc.etisalcom.net) 1> send mgr getportinfo detail
returns
Sending GETPORTINFO, request to MANAGER ...
No Dynamic Ports In Use or Configured
But I have tried with
DYNAMICPORTLIST 7809,7810,7811 7812-7850
But error message was the same.
Current settings for the mgr
GGSCI>edit params mgr
PORT 7813
Regards, Imran

Configuring RPC dynamic port allocation

Similar Messages

Maybe you are looking for