How to configure SMTP dynamic send port?

Hi,
I am trying to configure STMP send port to send emails, enabled SMTP Server on the DEV box and configured it as described in the link below.
https://sandroaspbiztalkblog.wordpress.com/2013/05/09/biztalk-2013-installation-and-configuration-install-and-configure-smtp-server-feature-part-4/
Able to send emails using Telnet client, and these email get stored in C:\inetpub\mailroot\Queue folder.
I have a dynamic send with following values.
msgEMail(SMTP.CC) = “[email protected]”;
msgEMail(SMTP.DeliveryReceipt) = False;
msgEMail(SMTP.From) = “[email protected]”;
msgEMail(SMTP.ReadReceipt) = False;
msgEMail(SMTP.Password) = “XXX;
msgEMail(SMTP.Username) = “DDD”;
msgEMail(SMTP.SMTPAuthenticate) = System.Convert.ToUInt32(XX.SMTPAuthenticate);
msgEMail(SMTP.SMTPHost) = “smtp.domain.local”;
msgEMail(SMTP.Subject) = “sdfgdfgd;
msgEMail(SMTP.MessagePartsAttachments) = 2;
Message gets suspended with the following error message.
A message sent to adapter "SMTP" on send port "XXX_DynamicSendPort_XXXX" with URI "mailto:
[email protected]" is suspended.
Error details: There was a failure executing the send pipeline: "Microsoft.BizTalk.DefaultPipelines.XMLTransmit,
Microsoft.BizTalk.DefaultPipelines, Version=3.0.1.0, Culture=neutral, PublicKeyToken=81bf3856ad764e35" Source: "XML assembler" Send Port: "XXX_DynamicSendPort_XXXXX URI: "mailto:localhost" Reason: Data at the root level is invalid.
Line 1, position 1.
MessageId:
{3C50F418-24C4-4661-9B34-4B7F5F6FBBA4}
InstanceID: {2F6B9A0E-92EE-4953-81D2-9A124FAC99CE}
Please can some advise me what is wrong here? do you think I have configured
msgEMail(SMTP.SMTPHost) property correctly? Or should it be the name of the DEV box?
Thanks
SS
Shiva Sadayan

Hi Shiva,
You should not be using XMLTransit pipeline at the send port.
Perhaps you should go with default passthrough pipeline or
Create a send pipeline with MIME/SMIME encoder and drop it at Encode section of pipeline. Accept the default settings for MIME/SMIME encoder and use it with the dynamic port.
I found this article very useful while sending email from BizTalk. Refer:
Sending Emails in Biztalk
Rachit
Please mark as answer or vote as helpful if my reply does

Similar Messages

How to configure Send Handler for BizTalk 2013 Dynamic Send Port on deployment?

Hi,
I do know how to manually configure a send handler for a dynamic send port in BizTalk 2013 Administration console. Though, once you export your application's configuration to a binding file, the dynamic send port's configuration does not
contain any information regarding the send handler. When you try to use this binding file when deploying your application your dynamic port's send handler falls back to the default host instance.
So my question is, how could we automate this process to avoid manual step in a dynamic port configuration during deployment?
Thank you,
--Vlad

Hey vlad,
As discussed at work in the office.. I woudl take the powershelll approach for now as a workaround. Here's a trivial script for my local dev box (all in one biztalk & SQL) (must be run in an x86 powershell session):
param
[string] $bizTalkDbServer = ".",
[string] $bizTalkDbName = "BizTalkMgmtDb",
[string] $fileHostInstance = "SendingHost",
[string] $sendPortName = "sm_dynamic_sp_test"
[System.reflection.Assembly]::LoadWithPartialName("Microsoft.BizTalk.ExplorerOM") | Out-Null
$catalog = New-Object Microsoft.BizTalk.ExplorerOM.BtsCatalogExplorer
$catalog.ConnectionString = "SERVER=$bizTalkDbServer;DATABASE=$bizTalkDbName;Integrated Security=SSPI"
foreach($sp in $catalog.SendPorts)
if($sp.Name -eq $sendPortName)
  "Found send port $($sp.Name), analyzing send handler"
  foreach($sh in $sp.DynamicSendHandlers)
   if($sh.SendHandler.TransportType.Name -eq "FILE")
    if($sh.SendHandler.Host.Name -ne $fileHostInstance)
     "Changing $($sh.Name) send handler to '$fileHostInstance' from '$($sh.SendHandler.Host.Name)'"
     $sp.SetSendHandler("FILE", $fileHostInstance)
    else
     "Send handler for $($sp.Name) is already '$fileHostInstance' ignorning .. "
$catalog.SaveChanges()

How to Configure SMTP Port in ODI

Hi,
Someone know how to configure SMTP port in the ODI tool? I tried changing the port number in the odiparams but I still encountered an error:"Could not connect to SMTP host." when executing the odisendmail package object though I can access the SMTP Server thru tracetcp.
TIA,
Cathy

950484 wrote:
Hi Bhabani,
Thanks for the quick response :) . I saw your post and its a nice approach in sending mail instead of using an odi package object odisendmail. However, the requirement is not to use the gmail credentials but to use the credentials provided to us. But I noticed that the port used for the SMTP server is not the default port number which is 25. So I am guessing that the reason why I cannot connect to the SMTP host is because of the port number. Do you know how to solve this?If you want to change the SMTP port then do the following
edit smtplib.py located at <ODI_HOME>/oracledi/lib/scripting/LIB
change SMTP_PORT to what ever port you want .
restart ODI
execute your mail sending program

Dynamically assign a send pipeline to a dynamic send port in orchestration

Hi
I have an orchestration that is using a dynamic send port. I need to somehow assign the send pipeline to the dynamic send port programmatically.
for example, I will have a decide shape in the orchestration. Based on the condition in the decide shape I need to assign the corresponding send pipeline for that condition. let's say in Branch A, I want to select xml assembler , in Branch B I will want
to select a flat file assembler...
how can this be achieved. I have seen some links recommending using the ESB tool kit, but I do not want to go down that route.
any help is appreciated
Regards, Mazin - MCTS BizTalk Server 2006

Ashwin
Thanks again for your reply.
If I do it using role links I will loose the flexibility I have "having a dynamic file name" lots of our partners would like to receive their files with specific file naming convention based on the content of the file.
If I use a decide shape / another dynamic send port, this means that everytime I have a new custom pipeline I would need to modify the orchestration and add another decide branch with another dynamic send port.
both of the above suggestions will break the flexibility of the solution since we now can configure new partners in seconds in the configuration database without the need to modify the orchestration or add any new send ports
Regards, Mazin - MCTS BizTalk Server 2006
So in your requirement, the “dynamic” nature you want from send port are
following:
To set the send file names dynamically depends on the message received.
To send the message to different send locations depending on the message received. You want to retrieve this destination URL location from database.
And send ports may have different pipeline component like flat-file and XML ones.
As I have commented in my earlier reply, Role-Link could fit your bill perfectly and this can be achieved by using following:
1) Receive a message into an Orchestration.
2) In Orchestration set the file name dynamically based on the received file and following code shall help you to set the name of the file to dynamic.
msgToBeSend(FILE.ReceivedFileName)="YourDynamicFileNameUWantToAssign";
Use the above while constructing the outgoing message.
3) Create a “Provider” Role-Link with send port type following the wizard.
4) In Orchestration’s expression shape may be before sending the message out,
performs the party resolution using a code similar to the following:
YourRoleLinkName(Microsoft.XLANGs.BaseTypes.DestinationParty) = new Microsoft.XLANGs.BaseTypes.Party(msgToBeSend.YourDistingushedPropertyToIdentifyParty, "OrganizationName");
5) In the above sample code “YourDistingushedPropertyToIdentifyParty” refer for the code which could identify the partyname where the send port is configured.
6) Create Parties representing different type of message to be send like flat-file or XML messages.
7) Create a static send port and populate the outbound URL dynamically by using a custom pipeline component. In the custom pipeline component URL can be dynamically bound by calling the database as per your reqirement i.e based on the received message by
accessing its content in custom pipeline access the database, find the destination URL and assign the “OutboundTransportLocation” context property of the outbound message something like this
msgToBeSend.Context.Promote("OutboundTransportLocation", "http://schemas.microsoft.com/BizTalk/2003/system-properties", YourOutboundURLFromDatabase);
Refer this article on this topic:
http://www.codit.eu/blog/2013/03/06/adding-dynamic-behavior-to-static-send-ports-a-caveat/
8) In the Parties you have created assign the send ports.
9) GoTo your “Role-Links” folder within the deployed BizTalk application and enlist the parties.
These steps enable you to achieve the dynamic requirement you want to implement with the mentioned Role-Link.
Regards,
M.R.Ashwin Prabhu
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

How to configure SMTP for iCloud?

I have never used the Mail program on my macs. I started using Eudora in 1995 and when Mail came along some years later, i didn't take to it, it didn't have the functionality i needed and enjoyed. Fast forward to a couple days ago, my Snow Leopard MacBook is wearing out and i got a new MacBook Pro running Mountain Lion. When i was setting up the new computer, i thought iCloud would be configured automatically. It wasn't because i have a couple of different Apple IDs but i think that is straightened out now and i'm signed in using the me.com email address and have my calendars and contacts syncing with iphone and my other computer. Mail is working, but only for my me.com email address which i rarely use. I mainly use a gmail address.
I don't want to use Mail and i don't want mail to be downloaded to it. That happened on my other computur, so that i had tens of thousands of messages in a program i never open and don't use. So i somehow turned it off so it no longer gets the mail from my other accounts. i don't want to receive email in Mail. But because i can't use Eudora in Mountain Lion, i need a new email client. Today, i downloaded and installed Mail Mate, i want to try it out. When I tried to use Mail mate to send an email i got a message saying "No SMTP server configured for iCloud." i googled how to configure SMTP for iCloud and what i found said it configures automatically. So i don't know what to do. I went to ICloud in system preferences and i don't see anything i can do there.
Is there anything i can get it to do to configure automatically? All my software is up to date, if that makes a difference.

i was persistently googling search terms for this problem and came across a link that gave information to the effect that for non Apple email clients, SMTP has to be configured manually, and the settings were provided. I entered them into Mail Mate and now it works. So thankfully, this problem is solved.

Dynamic Send Port : The FILE send adapter cannot open file C:\Temp for writing. Details: Access is denied.

Hi All,
We have requirement of using ESB toolkit and transforming incoming xml file to edi format. So, we are using ItinerarySelectReceiveXML pipeline for receiving the input from the input location and "EDISend" pipeline for transforming it into EDI and
send it to destination.
Now, the receive pipeline is picking up the file, but it is not processed and sent to destination.
And, we are getting an Access Denied error from Dynamic send port.
Error Description :
The FILE send adapter cannot open file C:\Users\Public\Temp for writing.
Details: Access is denied.
Any Immediate solutions/suggestions are appreciated...Thanks.
Anand

The difference between dynamic and static port would be send handler. For dynamic port, default send handler will be used and for static port the one configured on the port will be used, could you validate this configuration.
Also sometimes, administrative privileges are not "real" administrative privileges and company admins will have limited permissions on C Drive folders. Try writing to some other folder to isolate the issue.
Regards, Ajeet Kumar MCTS Biztalk Server

BizTalk Server 2013 and deployment MSI with dynamic send ports

Hello community, wonder if any help out there for this odd problem.
Deployment of application msi fails into BizTalk 2013 prod environment, fails when deploying the project dll that contains all the orchestrations,
and reports a failure to apply early bindings. The only early bindings in this project are dynamic send ports. I cannot recreate the problem in in my QAS environment where deployments of the same msi works fine.
I can build an msi without any bindings at all except for the dynamically created ones, and this also display the same behaviour on import.
I have test deployed a 2nd unrelated app that also uses dynamic send ports, and this displays the problem.
Adding the assembly directly to BizTalk console displays the same behaviour.
Deployment of msi apps without dynamic send ports are ok.
The dynamic ports use a pipeline including a custom pipeline component which I can confirm is available in the correct directory
C:\Program Files (x86)\Microsoft BizTalk Server 2013\Pipeline Components
No specific further detail is available in the error except.
Import Wizard[09/05/2014 08:20:47]: Error in Importing Application
Import Wizard[09/05/2014 08:20:47]: Change requests failed for some resources.
BizTalkAssemblyResourceManager failed to complete end type change request.
Unable to deploy early bindings.
Failed to update binding information.
Error in the application.
Other information that may be relevant:
The main difference between QAS and PROD is that PROD is a two node cluster. Import behaviour is the same if attempted on either node. Assemblies are installed in both nodes currently.
The dynamic ports are set on handlers that are non-clustered hosts (all are for adapter type SMTP).
I have ensured that all the adapter handlers are identically setup in both environments.
The project files were migrated to BizTalk 2013 from BizTalk 2010, imported and then converted using VS 2012.
The msi has installed the assemblies as per usual and they do exist in the .net 4 gac
There is a reference to a shared resource in a different application, this application is installed and imported ok.
I’m a bit stuck at what to try now, I have option where I could recreate the dynamic ports from scratch in the orchestrations and redeploy to dev in the hope it’s something that VS2012 didn’t handle too gracefully
when converting the project. I could move the functionality into a helper class and forget about using dynamic sends, rather not go down that route. I'm still suspecting this is small difference in setup
of the group between QAS and PROD but I can't see anything jumping out.
Any comments are most welcome.

The dynamic ports use a pipeline including a custom pipeline component which I can confirm is available in the correct directory
C:\Program Files (x86)\Microsoft BizTalk Server 2013\Pipeline Components
I’m a bit stuck at what to try now, I have option where I could recreate the dynamic ports from scratch in the orchestrations and redeploy to dev in the hope it’s something
that VS2012 didn’t handle too gracefully when converting the project.
Two things.
1. That's what I would do first, recreate (really just change and reset the properties) the Orchestration Ports in Visual Studio.
2. Probably not related but, Custom Pipeline Components should not be placed in the Pipeline Components folder. All Custom Pipeline Components should be in the GAC only. The Pipeline Components folder
is a compatibility vestige from BizTalk Server 2004.

How to configure SMTP server for osb 10.3.1

Hi All,
Can anyone share information on how to configure SMTP server for osb 10.3.1
and then how to send an email from osb 10.3.1
Thanks in Advance!!

Thanks a lot!!
I configured the same way. When I am sending email to an account on the same domain as my SMTP server is the sending of email is successful. But its giving error when I am trying to send an emain to an account which is on different domain. It giving error as "Operation has been cancelled"
Please suggest something.

Set Custome pipeline for dynamic send port in orchestration

I need to assign custom pipeline for dynamic send port in an orchestration .

The option is available in the Port Configuration wizard
Thanks, Murugesan M - Please Mark as the Answer, if this answers your question. Please vote as helpful, if this post is helpful.

BAM. Track message payload inside dynamic send port

Somehow Biztalk 2010 BAM fails to track message payload inside dynamic send port. Messaging properties and Context properties (from our own property schema) are tracked correctly.
I'm using XMLTransmit with specified document schema property on the send port, but this does not help.
Tracking the same properties on Receive port is successful.
What could cause this kind of behavior?

I do not use ESB. There are only simple send ports. I have been trying to track message payload either from static and from dynamic sen ports. In both cases it does not track anything (only null values).
I've trying with simple solution: one send and one receive ports. No mapping or other stuff. Tracking profile had the same fields set, both with two ports mapped: one send, and one receive. Receive port line is filled with correct values from message, while
send port line stays empty (null).
What could cause such behavior?

Biztalk 2010 : Dynamic send Port Block : HTTP Adapter

Hi
I have a customer who makes an intensive use of the DefaultServerApp host instance.
All of his applications use this instance for dynamic send port ( HTTP send adapter)
The problem is sometimes the messages accumulate in the message queue of the HTTP Send adapter and I have to restart the host instance to fix the problem until it appears again a month later.
note: many messages are timed out , could this to be the root cause ?

Secondary messagebox
-why !!!!
You have an issue in just one of the host instances. Where is this Secondary messagebox came into play? Is your database struggle with the load and does the message process
affect “all your processing in BizTalk”?
Or is this issue in host instance/design related. As you have many dynamic ports all of them will be using the default host instance. Some of these processes may have high
volume or high size messages so your host instance may be struggling to process the message and could cause the memory/process usage related issue. Exactly for these reasons Microsoft has given an option to tweaking the host processing and throttling setting.
Adding an additional messagebox database would be overdo for your issue.
Consider tweaking the throttling settings. If the process memory was increasing
continuously and if your investigation boils down to process memory usage for this issue, consider tweaking the
Process memory usage and Physical memory usage throttling thresholds.
Consider the suggestions from this MSDN article..
http://support.microsoft.com/kb/918643
Also consider about adding more RAM, physical memory.
As I mentioned in my earlier post, run the messagebox viewer tool and review its reports for health of the server.
Also ensure you have the latest version of Cumulative Update for your version of BizTalk installed. In some of the CUs, fix for memory leak has been included.
Another suggestion, review the design where you have so many dynamic ports. May be some of these processes have high volume or high size messages and since all use the dynamic
ports hence the same host instance you could have this issue. Consider to move away from dynamic port for some of the processes, if you find either high volume or high size message processing.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

How to configure JDBC Adapter(Sender & Receiver)

How to configure JDBC Adapter(Sender & Receiver)
Rgds
Ruchitha

Hi ruchitha thakur ,
These r the following web-sites which give u detailed information about configuring of JDBC Adapter(Sender & Receiver)
JDBC is a technical Adapter provided by SAP.
Configuring the Sender JDBC Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/1d/756b3c0d592c7fe10000000a11405a/content.htm
Configuring the Receiver JDBC Adapter
http://help.sap.com/saphelp_nw2004s/helpdata/en/b0/676b3c255b1475e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6d36d51d-0b01-0010-b3aa-9cb313b63cf4
SAP XI Utilize SAP Adapters to connect to heterogenous systems
https://wwwn.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3fc4bd90-0201-0010-68bd-ab931b06f9c2
cheers!
gyanaraj
***Pls reward points if u find this useful

How to configure SMTP on a different port?

Hi All,
We have just moved one of our BO servers to a cloud based environment and the exchange server in our new environment uses a different port instead of the default port 25.
Though we have configured all job servers in CMC to use the new port the error message we get when we schedule a report still indicates we are using port 25. Is there like a conifuration file or xml where we need to update this? If not, is there any other way to configure email destination on a different port?
We are using BO XI 3.1 SP3, MySQL repositiry, Tomcat server.
Error message we get:
server error. [Error initializing SMTP server. Return code: [TCP send failed.]. Reason: [X.Y.Z.A:25].]: [CrystalEnterprise.Smtp]
Thanks in advance...
Thanks,
Hari...

Thanks for the reply. Here is my situation explained.
We have a few WebI reports that need to be scheduled as Excel and PDF on a regular basis[weekly] to few users. These schedules work fine in our test environment where the Mail server is configured on port 25. However in our production enviornment , Mail server is configured on a different port. What I can confirm is that the port is open and if I try emailing through command prompt, I can connect the exchange server and send emails.
I have changed the setting on all Job servers [Adaptive Job Server, CrystalReports Job Server, DeskI Job Server, Destinaton Job Server, LOV Job Server, Program Job Server and Publication Job server], but still the email schedules fail and I am confused because the failure message [as in my first post] says it failed over port 25. Where is it still picking up Port 25 from though I have changed the confiuration on all Job servers?
Any guidance will be greatly appreciated.

How to configure SMTP server in OSB eclipse platform

how to configure the SMTP server in OSB eclipse platform......
secondly.................the output email shud contain message sent and not the overview of the mail how do i do it

How to configure the server? That depends on what server it is. If you are the administrator I would suggest finding the help file for the server and searching for the term "relaying". However I hope you are not, and can ask the real administrator.

How to configure FXO and FXS port?

hi,
can anyone help me on how to configure FXO port on 2820 router and FXS port on 2810.
What are the things i need to configure to make a voip network that connect to PSTN network and PBX?

hi
do refer this link which can provide you fair idea to get started with your configs.
http://www.cisco.com/en/US/partner/tech/tk1077/tech_configuration_examples_list.html
regds

How to configure SMTP dynamic send port?

Similar Messages

Maybe you are looking for