Configuring Streaming with Apache instead of IIS documents?
Hello everyone,
Does anyone have documentation for correctly setting up an Apache web server for steaming Zenworks Virtual Applications? The basic idea of putting the content off the root is straightforward but the other instructions seem to be geared specifically to IIS which we don't use.
Anyone have a few minutes to give a brief setup example for someone who is just dangerous with Apache?
-Nyle
Originally Posted by zeevromm
Nyle,
I'll see if I get anything like this from Spoon. I know nobody on the support team has streamed with Apache, so we don't have anything readily available.
If anyone else has been successful in setting this up, please post how you went about it.
Thank you so much for checking. I really appreciate it. We are a Novell SLES OES house and only use Windows servers for specific applications that we can't get for Linux. Deploying with Apache would be wonderful.
Similar Messages
-
Problems configuring JPDK with apache
I have ias 9i on solaris
oracle portal configured and running fine
ojsp and xml parser configured
I am trying to configure JPDK and use the samples that come with JPDK, but I have problems. I follow the instructions exactly: change the required parameters in jserv.properties, zone.properties and provider.xml. When I restart Apache and try to access the sample (http://server:port/servlet/sample) I get an HTTP 404 File not found error. I've checked and I can run succesfully servlets/JSP's. I would appriciate any help on this!!!!Argyris,
I had the exact same problem with it not being able to locate the oracle jar file. Not matter how I changed the wrapper.classpath it would not work.
I was able to resolve this by modifying the startJServ.sh file in the /Apache/bin directory to set the CLASSPATH environment variable and then run the startJServ.sh to start both the Apache and then Jserv. This will start Jserv manually so you'll also have to modify the jserv.conf file to set autostart to ON. This worked for me, hopefully it will work for you too...can't figure out why it doesn't work the correct way, I put in a tar but they couldn't find the problem either. -
Help me: Configuring JBoss with Apache
Hello,
I have a configuration problem.
I put my webApp on the htdocs directory, and I wanna to execute my JSPs files, but when I try to execute a JSP file the server response:
[source]
HTTP Status 500 - No Context configured to process this request
type Status report
message No Context configured to process this request
description The server encountered an internal error (No Context configured to process this request) that prevented it from fulfilling this request.
Apache Tomcat/4.1.24-LE-jdk14
[source]
Anybody can say me what I need to resolve it???
Thank you.In the log:
INFO [org.jboss.web.localhost.Engine] StandardHost[localhost]: MAPPING configuration error for request URI -
Configuring OC4j with Apache HTTPD server
I want to use OC4j as servlet container and Apache Server as a
Http server handling all static requests. Now as per the OC4j
documentation I created a OC4j.conf file and included the same
in the main httpd.conf file.
However I could not get my servlets running.I get the page not
found error.Can you suggest a way out.Hi,
Try this step.
Comment the following statements from your Jserv.conf file in
<oracle_home>/Apache/Jserv/conf :-
ApJServMount /servlets /root
ApJServMount /servlet /root
Still not working, reply.
Regards,
Yoga -
Workspace Configuration HTTP Server: Apache, IIS or others?
When I configure workspace under Hyperion Foundation, it asks me to configure the HTTP Server and gives me a choice of using Apache or IIS. My question is, are these the only two choices of HTTP Server for workspace? What if I had say Oracle HTTP Server installed, would workspace give me the option of using that?
Also, it is my understanding that FDM requires IIS to run. Now while I do have IIS installed, the workspace screen lets me select Apache as the HTTP Server. So does FDM work fine with Apache ?The default http servers are iis and apache up to version 11.1.1.3, in 11.1.2 apache is dropped and replaced by OHS.
It think it is possible to use OHS if you are also using Oracle application server in 11.1.1.3 (not something I would recommend as OAS is dropped after that)
The http server just really acts as a redirect to other products from workspace, so you access workspace on one port and it will redirect to the other products on different ports.
So Apache really does not have anything to do with with FDM and FDM will still run on IIS.
Cheers
John
http://john-goodwin.blogspot.com/ -
Need help on struts configuration with ColdFusion 10 using IIS
We need help on struts configuration with ColdFusion 10 using IIS.
Earlier we were using ColdFusion 8 with IIS 6 for one of our application. This application internally calls struts. After upgrading to ColdFusion 10 struts calls are not loading. We get 404 error.
In ColdFusion 8 struts were configured using actions extension .do in IIS from this file-
C:\ColdFusion8\runtime\lib\wsconfig\jrun_iis6.dll.
But in ColdFusion 10 this file is not present as ColdFusion 10 uses Tomcat in place of Jrun.
Also there is no information in ColdFusion log file.Duane wrote:
doctormirabilis, Welcome to the discussion area!
1) how can i configure the time capsule in order to operate as a remote base station synchronizing with the relay using the ethernet port?
Configure the Time Capsule to act as a bridge (not distributing IP addresses). Also configure the Time Capsule to create an 802.11n wireless network with a unique network name (SSID). That's it.
2) how can i avoid that my powerbook while accessing my wireless network does connect through the relay station instead of using the time capsule?
Configure the Time Capsule to use a different network name than the WDS link between the 2 AirPort Express (AX). Configure the PowerBook to use the Time Capsule network.
There are 2 pieces of information that you should be aware of...
(1) None of the PowerBooks are capable of 802.11n.
(2) The WDS link cuts your available bandwidth in half. So the wireless link to your neighbor's has a maximum potential of 27 Mbps.
Let's for a minute assume that you have a Mac compatible with 802.11n. In your configuration the time you could take advantage of the 802.11n speed is when the Mac is sending/recieving data directly from/to the Time Capsule.
There would be NO speed increase in Internet access. The speed of Internet access is going to be controlled by the slowest link in the path to the Internet. That is probably the connection to the ISP. The next slowest path is the WDS link to your neighbor's.
Duane,
I am in a similar situation, sharing internet with my neighbor. Do you think it would be plausible to hook up a vonage phone adapter to time capsule's ethernet port if time capsule is bridging from my neighbor's router in the configuration you have described? A check of my upload speed shows 1.67Mbps (powerbookG4 w/ airport extreme). Vonage reccommends 90kbps minimum upload speed. Am I going to lose some speed putting the Vonag adapter behind time capsule?
Thank you -
When I save a Pages document as a pdf and then try to email the document, it loads as an application octet-stream dat file instead of a pdf and recipients can't open it. Some load correctly, but about half don't load as a pdf. What's happening?
Hi mjmonck-
Which email provider are you using? There are different solutions possible for different providers. Yahoo is having trouble with attachments, outside of any Firefox issue. I've seen a Google user fix this by manually adding the mail URL to their ad block program- which mistakenly perceived the webmail page as an advertisement.
Hope this helps. -
10g - how to configure sso with iis-
hi, experts, I have followed Oracle® Business Intelligence Enterprise Edition Deployment Guide to configure SSO with IIS.
but I always meet this message.
Not Logged In
You are not currently logged in to the Oracle BI Server.
If you have already logged in, your connection might have timed out, or a communications or server error may have occurred
what steps are missing?
how to check?hi, experts,
I checked C:\OracleBIData\web\log\sawlog0.log on the obi server (windows server 2003 standard).
at Thu Feb 17 14:48:46 2011 , I logined OBI on another machine (not via the browser on the obi server).
however, the log shows the login user is the administrator of the obiserver (obiserver\administrator ).
any setup on IIS are wrong? thank you very much!
=========================================================================================
Running job 'MinutelyMonitor' took 7422 milliseconds, 12.3% of job's frequency (60 seconds).
Type: Error
Severity: 40
Time: Thu Feb 17 14:48:46 2011
File: project/webodbcaccess/odbcconnectionimpl.cpp Line: 371
Properties: ConnId-1,1;ThreadID-1796
Location:
saw.odbc.connection.open
saw.connectionPool.getConnection
saw.subsystem.security.checkAuthenticationImpl
saw.threadPool
saw.threads
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43001] Authentication failed for obiserver\administrator in repository Star: invalid user/password. (08004)
Type: Error
Severity: 42
Time: Thu Feb 17 14:48:46 2011
File: project/webconnect/connection.cpp Line: 276
Properties: ThreadID-1796
Location:
saw.connectionPool.getConnection
saw.subsystem.security.checkAuthenticationImpl
saw.threadPool
saw.threads
Authentication Failure.
Odbc driver returned an error (SQLDriverConnectW).
--------------------------------------- -
Weblogic Configuration with Apache 2.2
Hi ,
I am getting the below error configured weblogic 10.3.5 with apache 2.2
<HTML>
<HEAD>
<TITLE>Weblogic Bridge Message
</TITLE>
</HEAD>
<BODY>
<H2>Failure of server APACHE bridge:</H2><P>
<hr>Your content length exceeded INT_MAX<hr> </BODY>
</HTML>
Thanks,http://middlewaremagic.com/weblogic/?p=7795 (see the load balancing section)
-
How to install and configure latest xampp, php, Mysql, apache server, and configure it with dreamvie
Working on my next project for the tech blog Techmozilla I am trying to make php to work with Apache. . i surfed for the procedures and finally i was asked to do the below mentioned operation .. but i am unable to understand it can anyone please help me .I am using Windows XP
# Add the following 3 lines to your httpd.conf file. You can put them anywhere in the file but maybe it makes sense to put them after the other LoadModule section.
LoadModule php5_module "d:/Program Files/php/php5apache2_2.dll"
AddType application/x-httpd-php .php
PHPIniDir "D:\Program Files\php"
Is there any other link which helps to install PHP,Apache and MySql. Please help me. Thank you in advanceThis forum is for helping people who are trying to download and install Adobe software products. You need to find an information resource suitable to the task you are undertaking, most probably provided by whomever provided the resource(s) you are trying to install.
-
Newly installed coldfusion 11 configured with apache cannot read css/js/jpg files
I am sure I am missing something really easy, but I cannot get my css stylesheet to work on my fresh installation.
coldfusion 11 with apache 2.2
my cfm files can be parsed in subfolders, but a css file (or anything else other than cfm files) in the same folder doesn't seem to be working as hoped
if I type in something like "localhost/appName/css/main.css" I get a 404 File Not Found error
Does this error indicate an apache or coldfusion problem?
Thanks in advance for any help, WayneHi Wayne,
Could you please confirm if the webroot you are referring to is the ColdFusion webroot, or Apache webroot.
CSS files in the ColdFusion webroot may not be served when explicitly requested through the Apache port, since Apache would not even forward the request to ColdFusion.
Of course, when a CFM page is requested, stylesheet's referenced within CFM pages must get loaded!
- Immanuel -
Issues in ssl configuration with apache server (using reverse proxy)
Hi,
I am able to use apache server as a reverse proxy to connect to Portal. When I enter the web server url as https://mywebserver.com, I am able to connect to the http url of the Portal. But the moment I try to connect to the https url of Portal with this https url, I am not able to connect to the Portal. Thus I am not able to use apache as a proxy server for https connections it makes. What must I do. I read that mod_proxy_connect needs to be used, but how do I use this?
The second problem is that I need to use more than one kind of mapping.
For example I must be redirected to the Portal even if I use http://webserver.com , or even if I use https://webserver.com or even if I use http://webserver.com/irj or https://webserver.com/irj or http://ipaddress-websserver/irj etcI have SSLCertificateFile and
and SSLCertificateKeyFile .
My problem is with regard to ssl/CertificateChainFile?
what is this? Also how do I upload my J2EE Certificate into apache.
The problem is with Apache handshake is not happening.
I am forwarding the entire log during . I have put what I consider important in bold.Please have a look.
<b>----
</b>
Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1769): OpenSSL: Handshake: start
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: before/connect initialization
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: SSLv2/v3 write client hello A
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1512): OpenSSL: read 7/7 bytes from BIO#629160 [mem: 47855a8] (BIO dump follows)
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1459): ----
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0000: 16 03 01 04 1a 02 ...... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1488): | 0007 - <SPACES/NULS>
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1490): ----
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1512): OpenSSL: read 1048/1048 bytes from BIO#629160 [mem: 47855af] (BIO dump follows)
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1459): ----
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0000: 00 36 03 01 44 74 67 cb-38 b5 8e 42 3b 59 c3 6c .6..Dtg.8..B;Y.l |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0010: 23 5c 07 d0 8b 24 89 89-11 2e 0d 80 ed 1a 06 ea #
...$.......... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0020: 1d 10 b0 59 10 28 7c b4-02 cb d6 08 a8 e4 ea 5a ...Y.(|........Z |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0030: e5 88 5c 5d 90 00 39 00-0b 00 01 cc 00 01 c9 00 ..
]..9......... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0040: 01 c6 30 82 01 c2 30 82-01 2b a0 03 02 01 02 02 ..0...0..+...... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0050: 04 36 0b 23 72 30 0d 06-09 2a 86 48 86 f7 0d 01 .6.#r0...*.H.... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0060: 01 04 05 00 30 14 31 12-30 10 06 03 55 04 03 13 ....0.1.0...U... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0070: 09 6c 6f 63 61 6c 68 6f-73 74 30 1e 17 0d 30 33 .localhost0...03 |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0080: 31 30 30 32 30 37 32 35-30 30 5a 17 0d 30 35 31 1002072500Z..051 |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0090: 30 30 32 30 37 32 35 30-30 5a 30 14 31 12 30 10 002072500Z0.1.0. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 00a0: 06 03 55 04 03 13 09 6c-6f 63 61 6c 68 6f 73 74 ..U....localhost |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 00b0: 30 81 9f 30 0d 06 09 2a-86 48 86 f7 0d 01 01 01 0..0...*.H...... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 00c0: 05 00 03 81 8d 00 30 81-89 02 81 81 00 ef d6 ff ......0......... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 00d0: a6 39 e1 64 a5 d3 fb 16-de 4e ee 1d 81 84 31 bc .9.d.....N....1. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 00e0: e6 b7 96 07 3e 81 b9 94-d1 c1 e0 f9 00 3a 84 e8 ....>........:.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 00f0: 7a 30 11 cd 41 26 d6 6c-95 90 93 95 17 e0 1a b7 z0..A&.l........ |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0100: 00 0f 59 33 7d 1d f3 a0-83 17 c5 f3 7e b3 ad ed ..Y3}.......~... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0110: c9 60 ac af 9e 31 d2 ec-42 71 f9 c3 98 2e 93 f9 .`...1..Bq...... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0120: 9d c3 c4 3d b3 7d 9b 97-83 1c 6b bd c0 75 cc 96 ...=.}....k..u.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0130: dc b9 a0 1b 00 79 85 e4-19 1f 61 42 54 db 91 94 .....y....aBT... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0140: d8 1d 72 13 08 36 22 49-3b fb 05 dc 33 02 03 01 ..r..6"I;...3... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0150: 00 01 a3 21 30 1f 30 1d-06 03 55 1d 0e 04 16 04 ...!0.0...U..... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0160: 14 ed ed 02 af 94 13 59-1c 42 e6 69 40 e5 80 dd .......Y.B.i@... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0170: a4 e9 33 91 02 30 0d 06-09 2a 86 48 86 f7 0d 01 ..3..0...*.H.... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0180: 01 04 05 00 03 81 81 00-2c 22 08 bd 71 b6 80 43 ........,"..q..C |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0190: 5a 2a 8b e8 62 34 b4 b4-84 8a 47 4b 97 5e bf dd Z*..b4....GK.^.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 01a0: 17 4c 0a 1c b7 0e cd c5-d1 cc d8 77 cd 38 10 ef .L.........w.8.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 01b0: 22 02 f0 02 7f a2 39 2b-53 eb 31 b6 18 49 37 a0 ".....9+S.1..I7. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 01c0: 50 47 f2 34 ab 33 eb 5f-ec 5a f9 f7 53 5f 27 eb PG.4.3._.Z..S_'. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 01d0: 02 7f b4 28 3e e8 b1 c7-59 df 2c 93 25 c5 34 14 ...(>...Y.,.%.4. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 01e0: 7a 34 7c 45 b4 eb 6b 34-93 26 98 51 37 d3 e6 b0 z4|E..k4.&.Q7... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 01f0: 7f 83 e3 a9 04 d3 47 b3-3d de 43 57 27 45 82 c0 ......G.=.CW'E.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0200: 4d 48 bf c0 a7 2f 66 0c-0c 00 02 08 00 80 af 76 MH.../f........v |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0210: 1f f5 f6 48 a0 01 0f ed-55 4c 53 9a 7c 07 7a ba ...H....ULS.|.z. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0220: c7 9d 77 e8 8b c7 66 8f-80 03 18 c5 1f 4f 2a a0 ..w...f......O*. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0230: 08 6f 9f e3 13 94 30 56-e7 2f 96 7c 26 97 ba 12 .o....0V./.|&... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0240: aa fd 3e 43 e1 46 c2 d1-32 94 56 45 52 c0 24 6f ..>C.F..2.VER.$o |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0250: 38 e0 93 0f 3a f8 0a 7c-41 0e 4c 54 4f 5a 7e d4 8...:..|A.LTOZ~. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0260: 62 e6 71 cd a0 dc 1e 9b-17 e5 10 71 3c 9d c6 39 b.q........q<..9 |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0270: 05 50 b6 15 37 0b 68 4f-24 50 74 47 13 1c 74 d8 .P..7.hO$PtG..t. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0280: 81 27 81 71 3a 4a c5 26-7d b8 e6 21 b3 d9 00 80 .'.q:J.&}..!.... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0290: 4f 6f 5d e6 2d dc 77 46-e6 77 b1 94 3d 65 5b b0 Oo].-.wF.w..=e[. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 02a0: 3d 39 7a 6c a2 c7 0b e3-27 08 fa 48 8d 75 1a fe =9zl....'..H.u.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 02b0: 32 e6 13 d1 31 65 7d d5-11 34 21 78 38 d1 11 fb 2...1e}..4!x8... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 02c0: ea 59 8e 24 79 5a 4b c2-f7 98 22 51 9f a7 4d 2b .Y.$yZK..."Q..M+ |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 02d0: 15 98 fe d4 43 4b 34 25-b3 9b b3 ae 57 d1 ea 69 ....CK4%....W..i |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 02e0: 6e 02 7e 61 d7 80 b6 73-6a 3e ac eb 69 38 67 8f n.~a...sj>..i8g. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 02f0: a9 2a dc 93 3d 22 f3 6e-6a 5d 51 1f b1 b1 10 5e .*..=".nj]Q....^ |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0300: 82 28 48 0d 5a 78 f8 17-61 e0 c5 43 61 7a 42 6a .(H.Zx..a..CazBj |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0310: 00 80 42 fa 7e 11 b2 77-3a 8c de f1 52 5a e1 18 ..B.~..w:...RZ.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0320: d4 e7 8f ee 2c e0 06 ef-d5 37 87 62 07 14 d1 5a ....,....7.b...Z |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0330: ca 30 be fd dd 76 47 8f-ed f4 5f f3 64 6c 32 a9 .0...vG..._.dl2. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0340: d5 07 e2 9b f1 29 a3 bf-33 4a ed 72 6b 2e c3 0f .....)..3J.rk... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0350: 30 bd 13 a1 42 d8 f7 1d-58 8a 1c 53 d6 c3 c8 6e 0...B...X..S...n |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0360: 0e 51 e3 f5 a0 37 68 0d-04 c6 0e c4 4d cc ed 7c .Q...7h.....M..| |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0370: ef 8f 81 b3 52 34 0c 60-eb f8 01 19 cc 95 31 55 ....R4.`......1U |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0380: 7d 16 bf 0c df b8 e0 3d-8f 7c 7a 4a 64 98 93 59 }......=.|zJd..Y |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0390: eb ae 00 80 ef cb bc 38-ab 16 0e a2 b2 2d fa 0f .......8.....-.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 03a0: da 55 2d 67 a8 b8 34 1b-bf 39 d9 d6 da 65 f2 8f .U-g..4..9...e.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 03b0: 6f a2 b1 1d db bb d5 dd-ab cf 9e 63 00 e4 57 a5 o..........c..W. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 03c0: 18 4a dc 60 b0 97 5d 67-34 96 bf a2 43 2b 7d 70 .J.`..]g4...C+}p |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 03d0: d6 99 d2 31 d2 11 f4 f2-19 b8 0c 41 7d bf b1 7c ...1.......A}..| |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 03e0: fb 31 cb 3e c2 0a e2 26-1a 7e 63 50 9b 62 c3 82 .1.>...&.~cP.b.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 03f0: ca cd 36 82 0c 56 5f 26-f6 cc c6 6f 03 92 cc f5 ..6..V_&...o.... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0400: 6b 55 1a d6 92 f9 5b 59-18 c2 62 21 eb d8 a4 ea kU....[Y..b!.... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0410: fd b6 3e f7 0e ..>.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1488): | 1048 - <SPACES/NULS>
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1490): ----
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: SSLv3 read server hello A
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1207): Certificate Verification: depth: 0, subject: /CN=localhost, issuer: /CN=localhost
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1207): Certificate Verification: depth: 0, subject: /CN=localhost, issuer: /CN=localhost
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1207): Certificate Verification: depth: 0, subject: /CN=localhost, issuer: /CN=localhost
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: SSLv3 read server certificate A
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: SSLv3 read server key exchange A
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: SSLv3 read server done A
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: SSLv3 write client key exchange A
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: SSLv3 write change cipher spec A
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: SSLv3 write finished A
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: SSLv3 flush data
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1512): OpenSSL: read 5/5 bytes from BIO#629160 [mem: 47855a8] (BIO dump follows)
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1459): ----
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0000: 15 03 01 00 02 ..... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1490): ----
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1512): OpenSSL: read 2/2 bytes from BIO#629160 [mem: 47855ad] (BIO dump follows)
Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1459): ----
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0000: 02 28 .( |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1490): ----
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1782): OpenSSL: Read: SSLv3 read finished A
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1801): OpenSSL: Exit: failed in SSLv3 read finished A
[Wed May 24 07:03:54 2006] [info] SSL Proxy connect failed
[Wed May 24 07:03:54 2006] [info] SSL Library Error: 336151568 error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure
[Wed May 24 07:03:54 2006] [info] Connection to child 249 closed with abortive shutdown(server apacheserver:443, client j2eeserver)
[Wed May 24 07:03:54 2006] [error] (20014)Error string not specified yet: proxy: pass request body failed to j2eeserver:50001 (j2eeserver)
[<b>Wed May 24 07:03:54 2006] [error] (20014)Error string not specified yet: proxy: pass request body failed to j2eeserver:50001 (j2eeserve) from apacheserver ()
[Wed May 24 07:04:10 2006] [debug] ssl_engine_io.c(1523): OpenSSL: I/O error, 5 bytes expected to read on BIO#612610 [mem: 62ac80]
[Wed May 24 07:04:10 2006] [info] (OS 10060)A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. : SSL input filter read failed.
[Wed May 24 07:04:10 2006] [debug] ssl_engine_kernel.c(1787): OpenSSL: Write: SSL negotiation finished successfully
[Wed May 24 07:04:10 2006] [info] Connection to child 249 closed with standard shutdown(server apacheserver:443, client apacheserver)
</b> -
Hello Archers,
I've set up an svn Server with Apache folloing your wiki on my raspberry pi.
https://wiki.archlinux.org/index.php/LAMP
https://wiki.archlinux.org/index.php/Subversion_Setup
Unfortunately I get errors when I try to commit several files (15 or so). I think it is a timeout issue, however I don't know where to specify the timeout in the httpd.conf (or httpd-ssl.conf)
This is a client error message:
Commit failed (details follow):
Unexpected end of svndiff Input
And this the corresponding server side log:
[date] [dav:error] [pid 448:tid 2854220848] (70007)The timeout specified has expired: [client 192.168.178.55:63819] Timeout reading the body (URI: /Dokumente/!svn/txr/9-q/Music/myfile.mp3) [408, #0]
[date] [dav:error] [pid 448:tid 2854220848] [client 192.168.178.55:63819] mod_dav_svn close_stream: error closing write stream [500, #185004]
[date] [dav:error] [pid 448:tid 2854220848] [client 192.168.178.55:63819] Unexpected end of svndiff input [500, #185004]
I assume it is some error like this: http://subversion.apache.org/faq.html#s … -truncated
I think I don't have specified the timeouts correctly, since I haven't found the default option.
tl:dr
Do you know how to set the timeouts in the apache configuration file?
I very much appreciate your help.
arch on pi
Here are my configuration Files with my position for the timeout order:
httpd-ssl.conf:
# This is the Apache server configuration file providing SSL support.
# It contains the configuration directives to instruct the server how to
# serve pages over an https connection. For detailed information about these
# directives see <URL:http://httpd.apache.org/docs/2.4/mod/mod_ssl.html>
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Required modules: mod_log_config, mod_setenvif, mod_ssl,
# socache_shmcb_module (for default value of SSLSessionCache)
# Pseudo Random Number Generator (PRNG):
# Configure one or more sources to seed the PRNG of the SSL library.
# The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if not enough entropy
# is available. This means you then cannot use the /dev/random device
# because it would lead to very long connection times (as long as
# it requires to make more entropy available). But usually those
# platforms additionally provide a /dev/urandom device which doesn't
# block. So, if available, use this one instead. Read the mod_ssl User
# Manual for more details.
#SSLRandomSeed startup file:/dev/random 512
SSLRandomSeed startup file:/dev/urandom 512
#SSLRandomSeed connect file:/dev/random 512
SSLRandomSeed connect file:/dev/urandom 512
# When we also provide SSL we have to listen to the
# standard HTTP port (see above) and to the HTTPS port
Listen 443
## SSL Global Context
## All SSL configuration in this context applies both to
## the main server and all SSL-enabled virtual hosts.
# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
# See the mod_ssl documentation for a complete list.
SSLCipherSuite HIGH:MEDIUM:!aNULL:!MD5
# Speed-optimized SSL Cipher configuration:
# If speed is your main concern (on busy HTTPS servers e.g.),
# you might want to force clients to specific, performance
# optimized ciphers. In this case, prepend those ciphers
# to the SSLCipherSuite list, and enable SSLHonorCipherOrder.
# Caveat: by giving precedence to RC4-SHA and AES128-SHA
# (as in the example below), most connections will no longer
# have perfect forward secrecy - if the server's key is
# compromised, captures of past or future traffic must be
# considered compromised, too.
#SSLCipherSuite RC4-SHA:AES128-SHA:HIGH:MEDIUM:!aNULL:!MD5
#SSLHonorCipherOrder on
# Pass Phrase Dialog:
# Configure the pass phrase gathering process.
# The filtering dialog program (`builtin' is an internal
# terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog builtin
# Inter-Process Session Cache:
# Configure the SSL Session Cache: First the mechanism
# to use and second the expiring timeout (in seconds).
#SSLSessionCache "dbm:/run/httpd/ssl_scache"
SSLSessionCache "shmcb:/run/httpd/ssl_scache(512000)"
SSLSessionCacheTimeout 6000
## SSL Virtual Host Context
<VirtualHost _default_:443>
# General setup for the virtual host
DocumentRoot "/mnt/sda1/svn"
ServerName 192.168.178.48:443
ServerAdmin [email protected]
ErrorLog "/var/log/httpd/error_log"
TransferLog "/var/log/httpd/access_log"
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
# Server Certificate:
# Point SSLCertificateFile at a PEM encoded certificate. If
# the certificate is encrypted, then you will be prompted for a
# pass phrase. Note that a kill -HUP will prompt again. Keep
# in mind that if you have both an RSA and a DSA certificate you
# can configure both in parallel (to also allow the use of DSA
# ciphers, etc.)
# Some ECC cipher suites (http://www.ietf.org/rfc/rfc4492.txt)
# require an ECC certificate which can also be configured in
# parallel.
SSLCertificateFile "/etc/httpd/conf/server.crt"
#SSLCertificateFile "/etc/httpd/conf/server-dsa.crt"
#SSLCertificateFile "/etc/httpd/conf/server-ecc.crt"
# Server Private Key:
# If the key is not combined with the certificate, use this
# directive to point at the key file. Keep in mind that if
# you've both a RSA and a DSA private key you can configure
# both in parallel (to also allow the use of DSA ciphers, etc.)
# ECC keys, when in use, can also be configured in parallel
SSLCertificateKeyFile "/etc/httpd/conf/server.key"
#SSLCertificateKeyFile "/etc/httpd/conf/server-dsa.key"
#SSLCertificateKeyFile "/etc/httpd/conf/server-ecc.key"
# Server Certificate Chain:
# Point SSLCertificateChainFile at a file containing the
# concatenation of PEM encoded CA certificates which form the
# certificate chain for the server certificate. Alternatively
# the referenced file can be the same as SSLCertificateFile
# when the CA certificates are directly appended to the server
# certificate for convenience.
#SSLCertificateChainFile "/etc/httpd/conf/server-ca.crt"
# Certificate Authority (CA):
# Set the CA certificate verification path where to find CA
# certificates for client authentication or alternatively one
# huge file containing all of them (file must be PEM encoded)
# Note: Inside SSLCACertificatePath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCACertificatePath "/etc/httpd/conf/ssl.crt"
#SSLCACertificateFile "/etc/httpd/conf/ssl.crt/ca-bundle.crt"
# Certificate Revocation Lists (CRL):
# Set the CA revocation path where to find CA CRLs for client
# authentication or alternatively one huge file containing all
# of them (file must be PEM encoded).
# The CRL checking mode needs to be configured explicitly
# through SSLCARevocationCheck (defaults to "none" otherwise).
# Note: Inside SSLCARevocationPath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCARevocationPath "/etc/httpd/conf/ssl.crl"
#SSLCARevocationFile "/etc/httpd/conf/ssl.crl/ca-bundle.crl"
#SSLCARevocationCheck chain
# Client Authentication (Type):
# Client certificate verification type and depth. Types are
# none, optional, require and optional_no_ca. Depth is a
# number which specifies how deeply to verify the certificate
# issuer chain before deciding the certificate is not valid.
#SSLVerifyClient require
#SSLVerifyDepth 10
# TLS-SRP mutual authentication:
# Enable TLS-SRP and set the path to the OpenSSL SRP verifier
# file (containing login information for SRP user accounts).
# Requires OpenSSL 1.0.1 or newer. See the mod_ssl FAQ for
# detailed instructions on creating this file. Example:
# "openssl srp -srpvfile /etc/httpd/conf/passwd.srpv -add username"
#SSLSRPVerifierFile "/etc/httpd/conf/passwd.srpv"
# Access Control:
# With SSLRequire you can do per-directory access control based
# on arbitrary complex boolean expressions containing server
# variable checks and other lookup directives. The syntax is a
# mixture between C and Perl. See the mod_ssl documentation
# for more details.
#<Location />
#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>
# SSL Engine Options:
# Set various options for the SSL engine.
# o FakeBasicAuth:
# Translate the client X.509 into a Basic Authorisation. This means that
# the standard Auth/DBMAuth methods can be used for access control. The
# user name is the `one line' version of the client's X.509 certificate.
# Note that no password is obtained from the user. Every entry in the user
# file needs this password: `xxj31ZMTZzkVA'.
# o ExportCertData:
# This exports two additional environment variables: SSL_CLIENT_CERT and
# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
# server (always existing) and the client (only existing when client
# authentication is used). This can be used to import the certificates
# into CGI scripts.
# o StdEnvVars:
# This exports the standard SSL/TLS related `SSL_*' environment variables.
# Per default this exportation is switched off for performance reasons,
# because the extraction step is an expensive operation and is usually
# useless for serving static content. So one usually enables the
# exportation for CGI and SSI requests only.
# o StrictRequire:
# This denies access when "SSLRequireSSL" or "SSLRequire" applied even
# under a "Satisfy any" situation, i.e. when it applies access is denied
# and no other module can change it.
# o OptRenegotiate:
# This enables optimized SSL connection renegotiation handling when SSL
# directives are used in per-directory context.
#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
<FilesMatch "\.(cgi|shtml|phtml|php)$">
SSLOptions +StdEnvVars
</FilesMatch>
<Directory "/srv/http/cgi-bin">
SSLOptions +StdEnvVars
</Directory>
# SSL Protocol Adjustments:
# The safe and default but still SSL/TLS standard compliant shutdown
# approach is that mod_ssl sends the close notify alert but doesn't wait for
# the close notify alert from client. When you need a different shutdown
# approach you can use one of the following variables:
# o ssl-unclean-shutdown:
# This forces an unclean shutdown when the connection is closed, i.e. no
# SSL close notify alert is sent or allowed to be received. This violates
# the SSL/TLS standard but is needed for some brain-dead browsers. Use
# this when you receive I/O errors because of the standard approach where
# mod_ssl sends the close notify alert.
# o ssl-accurate-shutdown:
# This forces an accurate shutdown when the connection is closed, i.e. a
# SSL close notify alert is send and mod_ssl waits for the close notify
# alert of the client. This is 100% SSL/TLS standard compliant, but in
# practice often causes hanging connections with brain-dead browsers. Use
# this only for browsers where you know that their SSL implementation
# works correctly.
# Notice: Most problems of broken clients are also related to the HTTP
# keep-alive facility, so you usually additionally want to disable
# keep-alive for those clients, too. Use variable "nokeepalive" for this.
# Similarly, one has to force some clients to use HTTP/1.0 to workaround
# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
# "force-response-1.0" for this.
BrowserMatch "MSIE [2-5]" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0
# Per-Server Logging:
# The home of a custom SSL log file. Use this when you want a
# compact non-error SSL logfile on a virtual host basis.
CustomLog "/var/log/httpd/ssl_request_log" \
"%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
#SSLSessionTimeout 5m
Timeout 600000
<Location />
DAV svn
SVNParentPath /mnt/sda1/svn/repos
AuthzSVNAccessFile /home/svn/.svn-policy-file
AuthName "SVN Repositories"
AuthType Basic
AuthUserFile /home/svn/.svn-auth-file
# Satisfy Any
Require valid-user
</Location>
</VirtualHost>
httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/etc/httpd"
Timeout 60000
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:/run/httpd
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#nach fehlermeldung
LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#Felhermeldung undefined symbols
LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#nach Fehlermeldung
LoadModule cache_socache_module modules/mod_cache_socache.so
#nochne Fehlermeldung
LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule data_module modules/mod_data.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule deflate_module modules/mod_deflate.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule logio_module modules/mod_logio.so
#LoadModule lua_module modules/mod_lua.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#Fuer die cipher suite
LoadModule ssl_module modules/mod_ssl.so
#LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_event_module modules/mod_mpm_event.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#1 for svn
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule cgi_module modules/mod_cgi.so
#2 for svn
LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule imagemap_module modules/mod_imagemap.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
#3 for svn
LoadModule dav_svn_module modules/mod_dav_svn.so
LoadModule authz_svn_module modules/mod_authz_svn.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
AllowOverride none
Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/mnt/sda1"
#<Directory "/mnt/sda1/svn/repos">
# # Possible values for the Options directive are "None", "All",
# # or any combination of:
# # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# # Note that "MultiViews" must be named *explicitly* --- "Options All"#
# # doesn't give it to you.
# # The Options directive is both complicated and important. Please see
# # http://httpd.apache.org/docs/2.4/mod/core.html#options
# # for more information.#
# Options Indexes FollowSymLinks
# # AllowOverride controls what directives may be placed in .htaccess files.
# # It can be "All", "None", or any combination of the keywords:
# # AllowOverride FileInfo AuthConfig Limit
# AllowOverride None
# # Controls who can get stuff from this server.
# Require all granted
#</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
Include /etc/httpd/conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
Edit: inserted tl;dr
Last edited by arch_on_pi (2014-05-18 21:33:24)Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.
-
WebLogic 9.2 with Apache Connector Config
Hi I am new to this forum, WebLogic, and all Oracle products for that matter. I am a college intern and I have been asked to learn how to use WebLogic 9.2. I was told that they want it to be connected to apache with the mod_wl_22.so shared module for Apache. I have placed the module in the directory and added the LoadModule line to the httpd.conf file and the module loads fine. From reading through the WebLogic documentation I now know that I need to create a <Location> block in httpd.conf for the connector. I also know that the arguments that you need to use are WebLogicHost and WebLogicPort. So in my httpd.conf I have added the following.
<Location /weblogic>
WebLogicHost 10.15.107.90/weblogic
WebLogicPort 7001
</Location>
I also tried.....
<Location /weblogic>
WebLogicHost /weblogic
WebLogicPort 7001
</Location>
and.....
<Location /weblogic>
WebLogicHost 10.15.107.90
WebLogicPort 7001
</Location>
All with no luck. When I browse to http://10.15.107.90/weblogic I get nothing. Can anybody help me out here?
Thanks
ScottHi,
This is a template for 'httpd.conf'. Please make it sure that you are following this:
===
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs-2.0/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do not begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files/Apache Group/Apache2" will be interpreted by the
# server as "C:/Program Files/Apache Group/Apache2/logs/foo.log".
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:http://httpd.apache.org/docs-2.0/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
# Do NOT add a slash at the end of the directory path.
ServerRoot "C:/Program Files/Apache Group/Apache2"
# ScoreBoardFile: File used to store internal server process information.
# If unspecified (the default), the scoreboard will be stored in an
# anonymous shared memory segment, and will be unavailable to third-party
# applications.
# If specified, ensure that no two invocations of Apache share the same
# scoreboard file. The scoreboard file MUST BE STORED ON A LOCAL DISK.
#ScoreBoardFile logs/apache_runtime_status
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile logs/httpd.pid
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
## Server-Pool Size Regulation (MPM specific)
# WinNT MPM
# ThreadsPerChild: constant number of worker threads in the server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_winnt.c>
ThreadsPerChild 250
MaxRequestsPerChild 0
</IfModule>
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available before they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule access_module modules/mod_access.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_module modules/mod_auth.so
#LoadModule auth_anon_module modules/mod_auth_anon.so
#LoadModule auth_dbm_module modules/mod_auth_dbm.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule dir_module modules/mod_dir.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule headers_module modules/mod_headers.so
LoadModule imap_module modules/mod_imap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule status_module modules/mod_status.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule ssl_module modules/mod_ssl.so
LoadModule weblogic_module modules/mod_wl_20.so
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#ExtendedStatus On
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If this is not set to valid DNS name for your host, server-generated
# redirections will not work. See also the UseCanonicalName directive.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address anyway, and this will make
# redirections work in a sensible way.
ServerName beatest.kpit.com:80
# UseCanonicalName: Determines how Apache constructs self-referencing
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client. When set "On", Apache will use the value of the
# ServerName directive.
UseCanonicalName Off
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "C:/Program Files/Apache Group/Apache2/htdocs"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "C:/Program Files/Apache Group/Apache2/htdocs">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named explicitly --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs-2.0/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received. Be especially careful to use
# proper, forward slashes here. On Windows NT, "Personal/My Website"
# is a more appropriate choice.
UserDir "My Documents/My Website"
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
# You must correct the path for the root to match your system's configured
# user directory location, e.g. "C:/WinNT/profiles/*/My Documents/My Website"
# or whichever, as appropriate.
#<Directory "C:/Documents and Settings/*/My Documents/My Website">
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents. The MultiViews Option can be used for the
# same purpose, but it is much slower.
DirectoryIndex index.html index.html.var
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
AccessFileName .htaccess
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
</FilesMatch>
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
TypesConfig conf/mime.types
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
<IfModule mod_mime_magic.c>
MIMEMagicFile conf/magic
</IfModule>
<IfModule mod_weblogic.c>
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7004
WLLogFile C:/proxylog/wl-proxy.log
WLTempDir C:/temp/wl-proxy.log
MatchExpression /*
</IfModule>
<Location />
SetHandler weblogic-handler
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005
Debug ALL
WLLogFile C:/proxylog/wl-proxy.log
WLTempDir C:/temp/wl-proxy.log
DebugConfigInfo On
PathTrim /
DynamicServerList OFF
</Location>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# EnableMMAP: Control whether memory-mapping is used to deliver
# files (assuming that the underlying OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. On some systems, turning it off (regardless of
# filesystem) can improve performance; for details, please see
# http://httpd.apache.org/docs-2.0/mod/core.html#enablemmap
#EnableMMAP off
# EnableSendfile: Control whether the sendfile kernel support is
# used to deliver files (assuming that the OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. Please see
# http://httpd.apache.org/docs-2.0/mod/core.html#enablesendfile
#EnableSendfile off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you do define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog logs/error.log
# LogLevel: Control the number of messages logged to the error.log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# You need to enable mod_logio.c to use %I and %O
#LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio -
How to configure sso with SSL step by step
Purpose
In this document, you can learn how to configure SSO with SSL. After user have certificate installed in browser, he can login without input username and password.
Overview
In this document we will demonstrate:
1. How to configure OHS support SSL
2. How to Register SSO with SSL
3. Configure SSO for certificates
Prerequisites
Before start this document, you should have:
1. Oracle AS 10g infrastructure installed (10.1.2)
2. OCA installed
Note:
1. “When you install Oracle infrastructure, please make sure you have select OCA.
2. How Certificate-Enabled Authentication Works:
a. The user tries to access a partner application.
b. The partner application redirects the user to the single sign-on server for authentication. As part of this redirection, the browser sends the user's certificate to the login URL of the server (2a). If it is able to verify the certificate, the server returns the user to the requested application.
c. The application delivers content. Users whose browsers are configured to prompt for a certificate-store password may only have to present this password once, depending upon how their browser is configured. If they log out and then attempt to access a partner application, the browser passes their certificate to the single sign-on server automatically. This means that they never really log out. To effectively log out, they must close the browser.
Enable SSL on the Single Sign-On Middle Tier
The following steps involve configuring the Oracle HTTP Server. Perform them on the single sign-on middle tier. In doing so, keep the following in mind:
l You must configure SSL on the computer where the single sign-on middle tier is running.
l You are configuring one-way SSL.
l You may enable SSL for simple network encryption; PKI authentication is not required. Note though that you must use a valid wallet and server certificate. The default wallet location is ORACLE_HOME/Apache/Apache/conf/ssl.wlt/default.
1. Back up the opmn.xml file, found at ORACLE_HOME/opmn/conf
2. In opmn.xml, change the value for the start-mode parameter to ssl-enabled. This parameter appears in boldface in the xml tag immediately following.
<ias-component id="HTTP_Server">
<process-type id="HTTP_Server" module-id="OHS">
<module-data>
<category id="start-parameters">
<data id="start-mode" value="ssl-enabled"/>
</category>
</module-data>
<process-set id="HTTP_Server" numprocs="1"/>
</process-type>
</ias-component>
3. Update the distributed cluster management database with the change: ORACLE_HOME/dcm/bin/dcmctl updateconfig -ct opmn
4. Reload the modified opmn configuration file:
ORACLE_HOME/opmn/bin/opmnctl reload
5. Keep a non-SSL port active. The External Applications portlet communicates with the single sign-on server over a non-SSL port. The HTTP port is enabled by default. If you have not disabled the port, this step requires no action.
6. Apply the rule mod_rewrite to SSL configuration. This step involves modifying the ssl.conf file on the middle-tier computer. The file is at ORACLE_HOME/Apache/Apache/conf. Back up the file before editing it.
Because the Oracle HTTP Server has to be available over both HTTP and HTTPS, the SSL host must be configured as a virtual host. Add the lines that follow to the SSL Virtual Hosts section of ssl.conf if they are not already there. These lines ensure that the single sign-on login module in OC4J_SECURITY is invoked when a user logs in to the SSL host.
<VirtualHost ssl_host:port>
RewriteEngine on
RewriteOptions inherit
</VirtualHost>
Save and close the file.
7. Update the distributed cluster management database with the changes:
ORACLE_HOME/dcm/bin/dcmctl updateconfig -ct ohs
8. Restart the Oracle HTTP Server:
ORACLE_HOME/opmn/bin/opmnctl stopproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl startproc process-type=HTTP_Server
9. Verify that you have enabled the single sign-on middle tier for SSL by trying to access the OracleAS welcome page, using the format https://host:ssl_port.
Reconfigure the Identity Management Infrastructure Database
Change all references of http in single sign-on URLs to https within the identity management infrastructure database. When you change single sign-on URLs in the database, you must also change these URLs in the targets.xml file on the single sign-on middle tier. targets.xml is the configuration file for the various "targets" that Oracle Enterprise Manager monitors. One of these targets is OracleAS Single Sign-On.
1. Change Single Sign-On URLs
Run the ssocfg script, taking care to enter the command on the computer where the single sign-on middle tier is located. Use the following syntax:
UNIX:
$ORACLE_HOME/sso/bin/ssocfg.sh protocol host ssl_port
Windows:
%ORACLE_HOME%\sso\bin\ssocfg.bat protocol host ssl_port
In this case, protocol is https. (To change back to HTTP, use http.) The parameter host is the host name, or server name, of the Oracle HTTP listener for the single sign-on server.
Here is an example:
ssocfg.sh https login.acme.com 4443
2. Restart OC4J_SECURITY instance and verify the configuration
To determine the correct port number, examine the ssl.conf file. Port 4443 is the port number that the OracleAS installer assigns during installation.
If you run ssocfg successfully, the script returns a status 0. To confirm that you were successful, restart the OC4J_SECURITY instance:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Then try logging in to the single sign-on server at its SSL address:
https://host:ssl_port/pls/orasso/
3. Back up the file targets.xml:
cp ORACLE_HOME/sysman/emd/targets.xml ORACLE_HOME/sysman/emd/targets.xml.backup
4. Open the file and find the target type oracle_sso_server. Within this target type, locate and edit the three attributes that you passed to ssocfg:
· HTTPMachine—the server host name
· HTTPPort—the server port number
· HTTPProtocol—the server protocol
If, for example, you run ssocfg like this:
ORACLE_HOME/sso/bin/ssocfg.sh http sso.mydomain.com:4443
Update the three attributes this way:
<Property NAME="HTTPMachine" VALUE="sso.mydomain.com"/>
<Property NAME="HTTPPort" VALUE="4443"/>
<Property NAME="HTTPProtocol" VALUE="HTTPS"/>
5.Save and close the file.
6. Reload the OracleAS console:
ORACLE_HOME/bin/emctl reload
7. Issue these two commands:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Registering mod_osso
1. This command sequence that follows shows a mod_osso instance being reregistered with the single sign-on server.
$ORACLE_HOME/sso/bin/ssoreg.sh
-oracle_home_path $ORACLE_HOME
-config_mod_osso TRUE
-mod_osso_url https://myhost.mydomain.com:4443
2. Restarting the Oracle HTTP Server
After running ssoreg, restart the Oracle HTTP Server:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
Configuring the Single Sign-On System for Certificates
1. Configure policy.properties with the Default Authentication Plugin
Update the DefaultAuthLevel section of the policy.properties file with the correct authentication level for certificate sign-on. This file is at ORACLE_HOME/sso/conf. Set the default authentication level to this value:
DefaultAuthLevel = MediumHighSecurity
Then, in the Authentication plugins section, pair this authentication level with the default authentication plugin:
MediumHighSecurity_AuthPlugin = oracle.security.sso.server.auth.SSOX509CertAuth
2. Restart the Single Sign-On Middle Tier
After configuring the server, restart the middle tier:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Bringing the SSO Users to OCA User Certificate Request URL
The OCA server reduces the administrative and maintenance cost of provisioning a user certificate. The OCA server achieves this by authenticating users by using OracleAS SSO server authentication. All users who have an Oracle AS SSO server account can directly get a certificate by using the OCA user interface. This reduces the time normoally requidred to provision a certificate by a certificate authority.
The URL for the SSO certificate Request is:
https://<Oracle_HTTP_host>:<oca_ssl_port>/oca/sso_oca_link
You can configure OCA to provide the user certificate request interface URL to SSO server for display whenever SSO is not using a sertificate to authenticate a user. After the OracleAS SSO server authenticates a user, it then display the OCA screen enabling that user to request a certificate.
To link the OCA server to OracleAS SSO server, use the following command:
ocactl linksso
opmnctl stoproc type=oc4j instancename=oca
opmnctl startproc type=oc4j instancename=oca
You also can use ocactl unlinksso to unlink the OCA to SSO.I have read the SSO admin guide, and performed the steps for enabling SSL on the SSO, and followed the steps to configure mod_osso with virtual host on port 4443 as mentioned in the admin guide.
The case now is that when I call my form (which is developed by forms developer suite 10g and deployed on the forms server which is SSO enabled) , it calls the SSO module on port 7777 using http (the default behaviour).
on a URL that looks like this :
http://myhostname:7777/pls/orasso/orasso.wwsso_app_admin.ls_login?Site2pstoreToken=.......
and gives the error :
( Forbidden
You don't have permisission to access /sso/auth on this server at port 7777)
when I manually change the URL to :
https://myhostname:4443/pls/orasso/orasso.wwsso_app_admin.ls_login?Site2pstoreToken=.......
the SSO works correctly.
The question is :
How can I change this default behaviour and make it call SSO on port 4443 using https instead ?
Any ideas ?
Thanks in advance
Maybe you are looking for
-
Problem in executing FS10N transaction code -
Hi All, I am executing FS10N transaction code, in selection criteria for company code, I have selected multiple selection tab. Here in ranges tab, I have entered " 01 to 32" Company codes range. Then I am receiving the following message "ONLY SELECT
-
Report by Application Object Name
have zen7sp1ir1 i want to generate a report, by application object name, if it is distributed to the workstation. ( sucssess failed etc ) is it possible to do so? how ? helge
-
How to hide/suppress unit of measure for values of columns in structure
hi, hi i am using following in rows and columns. Rows: 1. material group 2. structure (key figures) key figure 1 key figure 2 key figure 3 3. base unit of measure Columns: 1. structure (time scale) fiscal period 1 fiscal period
-
Trouble installing Photoshop Subscription
I am trying to install the photoshop subscription I purchased earlier today onto my new imac. I have signed in and found it in my recent orders but when I click download nothing happens, I just get taken to Apps page. On the Apps page should I click
-
Connected to public wifi but still safari is not connected to internet
can someone help me to my iphone, i dont have a router at home, so that i always go to mall to connect to wifi but when im connected ti it and open my safari still says that im not connect to internet. im reseting the settings but still it doesnt wor