Configuring weblogic domain for IAM using WLST

Hi All,
i have to configure a weblogic domain using wlst(off-line).i am able to do this by using wls.jar template but that domain does not contain all the deployable component which is required for IAM ,IDM.
I don't know how to set the configuration component which is required for IAM,IDM as asked configuration wizard aske when we use GUI mode and how to give the schema details.
please give any idea how to configure a domain(for IAM,IDM) using WLST exactly same as GUI mode .
thanks

I'm not sure what is your problem, but there is no compatibility issue between CSS and Bind normally.
The docuement you referenced only says, in the background section, that the DNS server itself needs to be configured so part of your domain is handled by the CSS.
So, your dns server handles all request for your.domain but there is one NS entry forwarding request for www.your.domain to the CSS so the CSS can answer the dns request.
The css is not able to handle all types of dns request (ie: email server ip address request) so you can configure a 'dns forwarder' on the css to forward the request to another dns server.
See the following for dns forwarder config example
http://www.cisco.com/en/US/products/hw/contnetw/ps789/products_configuration_example09186a00801d3b52.shtml
Regards,
Gilles.
Thanks for rating.

Similar Messages

Not able to execute Configure Weblogic Domain script

Hi Experts,
I am trying to configure weblogic domain for odi.I have installed odi studio and weblogic server on WINDOWS 2008 SERVER R2 release(64 bit) and jdk - 1.6 update 22 (32 bit)
When i try to execute config.cmd it fails with following error:
c:\odi\mw_home\wlserver_10.3\common\bin>config.cmd
The system cannot find the path specified.
Please help me figure out what could be the problem.

Reinstallation fixed the problem.

Configuring Weblogic Domain in Offline Mode

Hi,
I wrote a java code which invoke wlst command required for configuring weblogic domain in offline mode.
please give any idea even i do not know exactly what are the required jar file but i have used weblogic.jar,wlfullclient.jar,jython.jar,and some jar files from modules folder which has given in someone post
i am getting the following error
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.management.scripting.utils.WLSTUtil.initOfflineContext(WLSTUtil.java:291)
at weblogic.management.scripting.utils.WLSTUtil.setupOfflineInternal(WLSTUtil.java:267)
at weblogic.management.scripting.utils.WLSTUtil.setupOffline(WLSTUtil.java:234)
at weblogic.management.scripting.utils.WLSTInterpreter.<init>(WLSTInterpreter.java:134)
at weblogic.management.scripting.utils.WLSTInterpreter.<init>(WLSTInterpreter.java:76)
at DomainConfiguration.<init>(DomainConfiguration.java:15)
at DomainConfiguration.main(DomainConfiguration.java:61)
Caused by: java.lang.NoClassDefFoundError: com/oracle/cie/wizard/ControllerProxy
at java.lang.Class.getDeclaredMethods0(Native Method)
at java.lang.Class.privateGetDeclaredMethods(Class.java:2427)
at java.lang.Class.getMethod0(Class.java:2670)
at java.lang.Class.getMethod(Class.java:1603)
at com.oracle.cie.domain.AbstractManager.getInstanceObject(AbstractManager.java:88)
at com.oracle.cie.domain.AbstractManager.load(AbstractManager.java:46)
at com.oracle.cie.domain.ConfigManager.<clinit>(ConfigManager.java:37)
at com.oracle.cie.domain.DomainConstants.<clinit>(DomainConstants.java:20)
at com.oracle.cie.domain.script.jython.WLScriptContext.init(WLScriptContext.java:220)
at com.oracle.cie.domain.script.jython.WLScriptContext.setup(WLScriptContext.java:162)
at com.oracle.cie.domain.script.jython.WLST_offline.setupContext(WLST_offline.java:105)
... 11 more
thanks in advance

Hi,
Make sure that you have weblogic.jar and jython-modules.jar
You will find weblogic.jar under %BEA_Home% / server / lib
and you will find jython-modules.jar under %BEA_Home% / common / wlst/modules
Regards,
Kal

How to install and configure WebLogic 10.3 to use 64-bit JDK?

Hi,
Is there a preferred/supported way to configure WebLogic to use the 64-bit JRockit that comes with JRockit Mission Control?
I can't find any official documentation about how to configure WebLogic to use a 64-bit JDK. From other forum posts I can tell we need to use the 64-bit JRockit that is bundled with JRockit Mission Control (available at [http://www.oracle.com/technology/software/products/jrockit/index.html]) but then we are kind of stuck - the configure script which let me select a JDK for a domain doesn't seem to let me re-configure an existing domain, and I can't find anything within the admin console that would let me set the JDK to use.
I was able to rename the existing jrockit_160_05 directory to e.g. jrockit_160_05_original and then rename the jrmc directory to "jrockit_160_05", effectively taking the place of the JDK being used but this seemed like a bad way to do it. I also found via Google this page: [http://java.sodeso.nl/application-servers/bea-weblogic/how-can-i-change-the-jdk-installation-that-weblogic-uses] which basically says to modify the JAVA_HOME environment variable in the start scripts, but this seems like the same thing.
With the plethora of products and the different ways they are bundled, combined with all the documentation about everything, I thought I would find something but I keep coming up blank. Does anyone have suggestions or pointers?
Thanks,
KaJun

Make sure your environment configuration is supported here:
http://www.oracle.com/technology/software/products/ias/files/fusion_certification.html
Then, you need to have the correct 64bit JDK installed. Sounds like you have done that.
Then download and run the generic platform installer as described here with your 64bit supported JDK:
http://download.oracle.com/docs/cd/E12839_01/doc.1111/e14142/start.htm#i1077535
Notice how the link you post has the generic installer for all the 64bit JVM rows, but the other installer for the 32bit JVMs on the 64bit OS?

Configuring the file T3 servives using WLST in WLS 10.3

Hi,
I am trying to use WLST to configure the File T3 services in Weblogic 10.3.
I can do it using the console.
Please find the link for configuring through console:
http://edocs.bea.com/wls/docs103/ConsoleHelp/taskhelp/filet3/TargetFileT3Services.html
Can some one help me in configuring it through WLST?

Hi,
did you try to record the console configuration?

Configure Apps domain for Trusted Identity Provider Authentication

Hi
I have a web application which is using siteminder as authentication provider for SharePoint 2013 enviornment.
Can we configure Apps domain on the environment?
If yes, can you provide a link or steps to follow. Our website is using SSL certificate and is public facing site.

Hi
I am receiving 401 unauthorized error when trying to access the app from the SharePoint site.
Any help is appreciated
Regards,
Amol

Problem Configuring Weblogic Domain

Hi All,
I am trying to create a new weblogic domain. Following is the error I am facing . Am very beginner to SOA, Please excuse me if this an entry level question.
System Configuration is : Windows 7, 64 Bit
Component Schema=SOA Infrastructure
Driver=oracle.jdbc.xa.client.OracleXADataSource
URL=jdbc:oracle:thin:@127.0.0.1:8080:1521/xe
User=DEV_SOAINFRA
Password=*********
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='SOAINFRA' and version='11.1.1.6.0'
IO Error: Got minus one from a read call
CFGFWK-60850: Test Failed!
Component Schema=User Messaging Service
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@127.0.0.1:8080:1521/xe
User=DEV_ORASDPM
Password=*********
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='ORASDPM' and version='11.1.1.6.0'
IO Error: Got minus one from a read call
CFGFWK-60850: Test Failed!
Component Schema=OWSM MDS Schema
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@127.0.0.1:8080:1521/xe
User=DEV_MDS
Password=*********
SQL Test=select 1 from schema_version_registry where
                    owner=(select user from
                    dual) and mr_type='MDS' and
                    version='11.1.1.6.0'
IO Error: Got minus one from a read call
CFGFWK-60850: Test Failed!
Component Schema=SOA MDS Schema
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@127.0.0.1:8080:1521/xe
User=DEV_MDS
Password=*********
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='MDS' and version='11.1.1.6.0'
IO Error: Got minus one from a read call
CFGFWK-60850: Test Failed!
Thanks

URL=jdbc:oracle:thin:@127.0.0.1:8080:1521/xeYou have entered incorrect IP/host name for DB(127.0.0.1:8080). Please enter only 127.0.0.1 or localhost
Regards,
Anuj

Configure PDC domain for windows Client

Hello,
Forgive my approximate English.
I need help to install a server Mac with a domain Activate directory ( PDC) so clients Windows connect to it.
I installed th server Mac Os to create a master Open Directory.
Mac OS Server has to configure the DNS with host's name.
The customers Windows 8.1 see the server on the network.
They indeed answer Ping.
NSlookup does not return error.
But when I attempt to configure the domain on the client Windows, it does not find the server. (An error DNS returned?)
Thank you for your help.

foossile wrote:
Thx for your response.
t is possible then for the Mac Server to supply the following services for clients Windows:
- File sharing with rights.
- Management of group user.
- Possibility of imposing a police of security of password.
Thank you, it will be everything.
Yes a Mac server can provide file sharing to Windows users, yes it can set permissions for those files and folders being shared
No it cannot do the equivalent of Group Policies as used to manage Windows systems
Yes it can define rules for passwords such as length, how long before it must be changed, how often it can be reused, etc.

OSB 11.1.1.7 - CANNOT EXTEND WLS DOMAIN TO OSB USING WLST

Hi ,
Need the help in creating the OSB clustered domain.
Followed the below documentation. But not getting the required results.
http://docs.oracle.com/cd/E21764_01/web.1111/e14138/fmw_templates.htm#CJAIDFCA
Domain that created after using the wlst by using the given templates IS configured with "osb_server1" managed server. The managed servers that we defined those are in cluster does not have any OSB product deployment.
After doing the research got that that there was bug and has been fixed in 11.1.1.6. But I am not able to figure out the solution.
Created the Oracle support ticket but no help so far.
I am using the below templates and in the below sequence
Var.MIDDLEWAREHOME=/opt/oracle/middleware
Var.WLSTEMPLATESDIR=/opt/oracle/middleware/wlserver_10.3/common/templates
Var.ORACLETEMPLATESDIR=/opt/oracle/middleware/Oracle_OSB1/common/templates
Template.1=<Var.WLSTEMPLATESDIR>/domains/wls.jar
Template.2=<Var.WLSTEMPLATESDIR>/applications/wls_webservice.jar
Template.3=<Var.WLSTEMPLATESDIR>/applications/wls_webservice_jaxws.jar
Template.4=<Var.MIDDLEWAREHOME>/oracle_common/common/templates/applications/jrf_template_11.1.1.jar
Template.5=<Var.MIDDLEWAREHOME>/oracle_common/common/templates/applications/oracle.jrf.ws.async_template_11.1.1.jar
Template.6=<Var.ORACLETEMPLATESDIR>/applications/oracle.soa.common.adapters_template_11.1.1.jar
Template.7=<Var.MIDDLEWAREHOME>/oracle_common/common/templates/applications/oracle.emas_template_11.1.1.jar
Template.8=<Var.MIDDLEWAREHOME>/oracle_common/common/templates/applications/oracle.emai_template_11.1.1.jar
Template.9=<Var.MIDDLEWAREHOME>/oracle_common/common/templates/applications/oracle.em_11_1_1_0_0_template.jar
Template.10=<Var.ORACLETEMPLATESDIR>/applications/wlsb_base.jar
Template.11=<Var.ORACLETEMPLATESDIR>/applications/wlsb.jar
Template.12=<Var.ORACLETEMPLATESDIR>/applications/wlsb_owsm.jar
Below is the Oracle Service Bus - 11.1.1.7
http://docs.oracle.com/cd/E28280_01/web.1111/e14138/fmw_templates.htm#CJACDGDI
Edited by: user12019269 on Apr 19, 2013 11:12 AM

The upgrade steps involved are described here: http://download.oracle.com/docs/cd/E17904_01/doc.1111/e15032/toc.htm

Configuring Weblogic Server for X.509 Smart Card Authentication

0 down vote favorite
share [g+] share [fb] share [tw]
I am running Oracle Weblogic 11g (10.3.6) and attempting to configure two-way SSL (client certificate requested and enforced). The client certificate is on a smart card.
I have enabled "basic" ssl in the weblogic server, and used keytool to import the relevant root CA certificates into the DemoTruststore.jks file. I have set the Two-way client cert behavior to Client Certs Requested and Enforced for the server.
Unfortunately, attempting to access my application causes the following:
<pre>
<Certificate chain received from 127.0.0.1 - 127.0.0.1 was incomplete.>
<NO_CERTIFICATE alert was received from 127.0.0.1 - 127.0.0.1. Verify the SSL configuration has a proper SSL certificate chain and private key specified.>
<Certificate chain received from 127.0.0.1 - 127.0.0.1 was incomplete.>
</pre>
The ActivClient dialog never appears to select a certificate from the Smart Card, and a pin is never requested. Therefore, I think I misconfigured something.
Help would be greatly appreciated.
Jason

Hello Mukunthan Damodharan,
this means that the SSL Server Certificate has not his fully quallified name in the subject alternative name extension of the X.509 certificate.
You can create a valid one or disbale that check in the Secure Login Client.
How does the configuration gets to the clients?
With the Policy Download you can disable that check over the Secure Login Server Administration console in the corresponding authentication profile.
If manually you can change the following registry key:
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\SAP\SecureLogin\profiles\<profile name>
"sslHostAlternativeNameCheck"=dword:00000000
the value 0 disable that check on the client.
best regards
Alexander Gimbel

When configuring a datasource for Oracle using the thin client, I get an Oracle error.

We have had no problems using Oracle up to this point, and have been using ColdFusion and Oracle very happily for a long time.
Due to security requirements where the ColdFusion server is hosted, the following changes were made to the Oracle client on the Oracle RDMS machine which caused ColdFusion to be unable to connect.
In the sqlnet.ora file, we had to add the follwing line:
SQLNET.ALLOWED_LOGON_VERSION = 10
That parameter was required, it is not optional and we cannot lower it.
Info about our ColdFusion Server:
System Information
Server Details
Server Product
ColdFusion
Version
ColdFusion 10,285437
Edition
Enterprise
Operating System
Windows Server 2008 R2
OS Version
6.1
Update Level
/D:/ColdFusion10/cfusion/lib/updates/chf10000011.jar
Adobe Driver Version
4.1 (Build 0001)
We are using Oracle 11.2.0.3
Once that change is in place, connections from our ColdFusion server get refused with the following error:
ORA-28040: No matching authentication protocol
I have verified that I can connect to the database with our credentials, and verified that the connection is valid:
From the local server's ODBC Data Source Administrator console, I create a system DSN using the Oracle OCI client driver (ojdbc6.jar) by indicating that the TNS Service name is the same as defined in the TNSNames file, and it tests out fine.
Everything I have found on the net indicates that I would need to make a change to the Client, but the Client in this case is the ColdFusion server. It doesn't seem like other than the fact that it seems to be using the correct driver, that it is making any use of any of the additional settings, including those found in the sqlnet.ora file.
HELP! I don't know where else to go... i don't believe that this is an Oracle error, since everything seems to be functioning correctly. I believe this to be a ColdFusion issue.
Any help or pointers would be greatly appreciated.

Thank you VJ, however that didn't provide any help. There are no pointers at all within that post.
Please keep in mind that I don't believe this to be an Oracle issue. The Oracle client is functioning fine when I use the ODBC tools in windows to verify the connection.
I can google, "SQLNET.ALLOWED_LOGON_VERSION = 10" and get a billion links that say basically nothing too.
I believe this is the way ColdFusion is configured to use the Oracle drivers... Which is why I can't ask Oracle, they'd just tell me to go to Adobe!
But, I have searched Oracle Support, and there wasn't much there either, so I am turning to the community in hopes that someone has seen this and solved it.

Reg : Error While Configuring Weblogic Using :11.1.1.6 for SOA

Hi team,
following is the error iam getting while configuring weblogic server for SOA
OS : Win XP SP3 : SOA Version : 11.1.1.6
Component Schema=SOA Infrastructure
Driver=oracle.jdbc.xa.client.OracleXADataSource
URL=jdbc:oracle:thin:@localhost:1521/xe
User=DEV_SOAINFRA
Password=***
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='SOAINFRA' and version='11.1.1.6.0'
ORA-00604: error occurred at recursive SQL level 1
ORA-01882: timezone region not found
CFGFWK-60850: Test Failed!
Component Schema=User Messaging Service
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@localhost:1521/xe
User=DEV_ORASDPM
Password=***
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='ORASDPM' and version='11.1.1.6.0'
ORA-00604: error occurred at recursive SQL level 1
ORA-01882: timezone region not found
CFGFWK-60850: Test Failed!
Component Schema=OWSM MDS Schema
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@localhost:1521/xe
User=DEV_MDS
Password=***
SQL Test=select 1 from schema_version_registry where
                    owner=(select user from
                    dual) and mr_type='MDS' and
                    version='11.1.1.6.0'
ORA-00604: error occurred at recursive SQL level 1
ORA-01882: timezone region not found
CFGFWK-60850: Test Failed!
Component Schema=SOA MDS Schema
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@localhost:1521/xe
User=DEV_MDS
Password=***
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='MDS' and version='11.1.1.6.0'
ORA-00604: error occurred at recursive SQL level 1
ORA-01882: timezone region not found
CFGFWK-60850: Test Failed!
Please provide your comments.
Sridhar

Have a look at this...
http://www.smartmarmot.com/2011/10/workaround-to-the-issue-ora-01882-timezone-region-not-found-when-connection-to-oracle/
In your case your still running the installer... So you'll probably have to set the option on your JVM directly...
Cheers,
Vlad

How to setup the cluster environment for BPM using weblogic

want to setup the cluster environment for BPM using weblogic....
i have installed the oracle weblogic server 10gr3 and oracle BPM enterprise for weblogic 10gR3
i have used the Admin tools from the "oracle BPM enterprise for weblogic" to setup the configuration and create the weblogic domain servers.
i can launch the process administrator and import the project exp file to domain server.
but what should i do to setup cluster environment using weblogic?
what i want to do is :
setup one admin machine..
setup two product machine..
enable the cluster so the admin machine can monitor the status of the product machine..
thanks a lot ...

The install guide at http://download-llnw.oracle.com/docs/cd/E13154_01/bpm/docs65/config_guide/index.html gives a reasonable amount of info on how to do this.
Personally I have not used the OBPM option to configure WebLogic instead I've used the information in the above install guide to create the weblogic domain in advance of configuring OBPM.
Once you've setup WebLogic configure OBPM using the values I mention in the following thread: How to set the JMX Engine parameter in Process Administation?
Let me know any specific config questions and I'll do my best to answer them for you.
Thanks,
Mike

Configuring weblogic 9.2 domain on Solaris box through Eclipse in Windows

Hi,
I'm able to configure weblogic domain on a solaris 10 box from eclipse form windows machine. But while trying to start the server through eclipse i'm getting the error "Error Launching Executable"
Any help appreciated.
Thanks
Prasanth

First of all you should check out which products are supported on 64bit :- http://www.oracle.com/technology/products/bi/hyperion-supported-platforms.html
If you are planning on using windows 64bit EAS then you will have to manually deploy the web application, it cannot be automatically deployed.
Cheers
John
http://john-goodwin.blogspot.com/

Error while configuring the domain "Configure JDBC Component Schema"

Hi Everyone,
I have installed SOA Suite 11g on my Win 7 machine 64bit OS and while trying to configure the domain for the WebLogic Server. I fallowed the wizard and everything went well till the JDBC Component Schema window. Here I am able to pass through
1. BAM Schema- Failed
2. SOA Infrastructure-Failed
3. User Messaging Service-Passed
4. OWSM MDS Schema-Passed
5. SOA MDS Schema-Passed
and here is the error that i am facing...
Component Schema=BAM Schema
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@localhost:1521/XE
User=DEV_ORABAM
Password=*******
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='BAM' and version='11.1.1.2.0'
CFGFWK-60850: Test Failed!
CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
Component Schema=SOA Infrastructure
Driver=oracle.jdbc.xa.client.OracleXADataSource
URL=jdbc:oracle:thin:@localhost:1521/XE
User=DEV_SOAINFRA
Password=*******
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='SOAINFRA' and version='11.1.1.2.0'
CFGFWK-60850: Test Failed!
CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
I googled the error and tried to check whether the Schema_version_registry has any rows are not and initially i don't have any and then I have created table named "Schema_version_registry" and then inserted the values accordingly..
CREATE TABLE schema_version_registry(owner VARCHAR2(30), mr_type VARCHAR2(10), version VARCHAR2(50));
INSERT INTO schema_version_registry(owner, mr_type, version) VALUES ('DEV_SOAINFRA','MDS','11.1.1.2.0');
similarly i did for the DEV_ORABAM but there is no use...........
I am struck at this position can any please help me out........... please..
Thanks in advance
Sorry Guys.. I understood my mistake and change the "mr-type" accordingly... it is successful now..
Thanks if anyone tried to answer it.......
Edited by: user10763276 on Oct 10, 2010 5:11 PM

Hi can anyone please help me ...all the jdbc component schema is failing for me while creating domain.
please find the log.
Component Schema=SOA Infrastructure
Driver=oracle.jdbc.xa.client.OracleXADataSource
URL=jdbc:oracle:thin:@localhost:1521/XE
User=sys as sysdba
Password=*********
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='SOAINFRA' and version='11.1.1.5.0'
CFGFWK-60850: Test Failed!
CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
Component Schema=User Messaging Service
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@localhost:1521/XE
User=sys as sysdba
Password=*********
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='ORASDPM' and version='11.1.1.2.0'
CFGFWK-60850: Test Failed!
CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
Component Schema=OWSM MDS Schema
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@localhost:1521/XE
User=sys as sysdba
Password=*********
SQL Test=select 1 from schema_version_registry where
owner=(select user from dual) and mr_type='MDS' and
version='11.1.1.5.0'
CFGFWK-60850: Test Failed!
CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
Component Schema=SOA MDS Schema
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@localhost:1521/XE
User=sys as sysdba
Password=*********
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='MDS' and version='11.1.1.5.0'
CFGFWK-60850: Test Failed!
CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.
"

Configuring weblogic domain for IAM using WLST

Similar Messages

Maybe you are looking for