Confirmation button is de-activated

User tryinig to create a central confirmation but confirmation with reference buttin is deactivated only in cse of one Purchase order but if i chek other purchase order the same user is able to do a central confirmation . i have checked Purchse order but that seems to be fine to me.
Please sugest the possible things to check out to correct this error.
Thanks
Sunny Sharma

Hi Sunny,
Check the following:
- What is the Purchase Order status, is it status: ordered?
- In the header tab of the Purchase Order check the 'follow-on' tab whether GR indicator is set
- Check whether any workflow on the PO is succesfully completed: Approved
- In Purchasing -> Purchasing -> Powl: Purchase Order -> Select the purchase order -> The 'create confirmation with reference' is also gray/disabled here?
- Check in GUI: BBP_PD -> find Purchase Order -> check in (i think header) whether the GR indicator is set.
Question:
- What is your systems SP level?
I could check your scenario in my system tomorrow. My basis told me that they couldn't apply the note: '1435570 - Cannot confirm SC having PO with a change version' though on our system, since it needs to be completely manually implemented we will go for the new SP when it's there.
Kind regards
Tim

Similar Messages

Confirmation button is disabled

Hello Gurus,
I have an issue which is very critical in my project now.
The confirmation button is disabled in central confirmation and Purchasing work centers.
In the PO the Goods Receipt is required is Flagged On.
Please give your suggestions.
Regards
Madhan

Hi ,
    If you made any changes to the SRM PO then Please check in BBP_PD transaction for that PO any change version
    document is closed or not.If it is not closed the GR confirmation button will be inactive.
    For PO change version the Document should be closed.
    Reason : 1 .Please check the PO workflow went in Error ( Then Backend transfer will fail and I1080 Status is active still )
                   2. PO change version workflow executed successfully and there might be chance of failing database update task
                        while updating the PO.
   Regards,
Devi

Change Confirmation button Grayed

Hello Friends,
We are in SRM 5.0, Extended classic, SP level 15. Even though I had security give me SAP_ALL and real buyer's role to me, I still see the Change Confirmation button grayed out. I can create confirmation but not change.
Please advise. I am trying to simulate an issue -
SC create --> PO create --> Conf create --> reverse conf --> add line item to PO --> create confirm again.
I am not able to do the 4th step shown above since the button is grayed out.
Any ideas and suggestions appreciated.
Thank you all
Rao.

Hi Rao
run clean job and status job and do. you can do it.
- create confirmation
- return delivey
- create a confirmation which you did return delivery
button will be active.
Muthu

How do I revert to abackup from time machine? The backups prior to Lyon install are not available - restore button is not active. I wish to return to Snow Leopard.

How Do I revert to Snow Leopard from Lyon?
The backups prior to Lyon install are not available... the restore button is not active.
thanks!

You need to do a full system restore from your last Snow Leopard backup.
See #14 in Time Machine - Frequently Asked Questions.

Everytime I try to pay with my cc on paypal, I enter all of my infor and after I press the "review and confirm" button the same page reopens but has erased only my cc #, exp date and security cvv number. What could be wrong?

b.stats.paypal.com : server does not support RFC 5746, see CVE-2009-3555
This appears on my error page everytime I try to use my credit card through paypal. I enter all of my info (billing, etc..) and after hitting the "review and confirm" button the same page reappears and has erased my cc number and leaving my name and billing info. What can I do to finish my transaction?

The message about CVE-2009-3555 is meant for webmasters to make them aware that they need to fix their servers.<br />
Firefox 3.6 versions can detect such a misconfiguration and displays a warning in the "Tools > Error Console".<br />
* http://wiki.mozilla.org/Security:Renegotiation
You may have a problem with the PayPal cookies.
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
See also:
* http://kb.mozillazine.org/Cookies#Removing_cookies
* [[Cookies]]
* [[Enabling and disabling cookies]]

I get "an error has occured" when trying to download from the AppStore. I can not re-download as the button is not active.

I encountered the response "an error has occured" when I downloaded Maverick X from the App Store. I can not try to re-download as the download button is not active. I have tried rebooting and to get the download from apple.com but it keeps redirecting to the App Store.
Suggestions?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

HT3149 iPhoto 09 When I click on the preview pane to move a photo into edit, it shows up black and the edit buttons are not active. How do I fix that?

When I click on the preview pane to move a photo into the edit pane, there is no image just a black square and the edit buttons are not active. A few images in an event will move to the edit pane but most will not. I cannot work with those images that do not enter the edit pane..no attaching to email, make a card, slideshow, etc.

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Photos have a ? in the top left hand corner. When I click to reconnect files are found but the reconnect button is not active

Mostr f my photos have a question mark in the top left hand corner. When I go to <file> and click on reconnect the missing files are searched for and found but the reconnect button is not active. What can I do. I m unable to edit these photos.

jeglee
What version of Premiere Elements are you using and on what computer operating system is it running?
It sounds like you are in the Elements Organizer that came with your version of Premiere Elements.
That ? in the top left corner of the thumbnail indicates a file that is no longer in the hard drive save location as it was
when a copy of the file was included in the Elements Organizer.
1. Do you know that the file(s) still exist? Could you have moved, deleted, or renamed file/folder involved? Can you go
to the hard drive save location for the file and actually find it there?
If you are working with Photoshop Elements instead of Premiere Elements, you have posted in the wrong forum. In that case, please post your thread in the Adobe Photoshop Elements Forum or wait for a moderator to see your thread here and move it from here to there.
Photoshop Elements
If not, we will continue our exchanges of information here in order to resolve your issue.
Thank you.
ATR

HT4527 got to the end of these instructions but the import button isn't active. I can see my whole library though. what now?

Got to the end of these instructions for transferring library to new computer. Can see my library via home sharing but the import button is not active. How do I continue?

I'm sorry to be so incredibly dense. The article to which you linked says:
"If the computer is already authorized, the item plays. If the computer has not yet been authorized, iTunes asks you to enter the Apple ID and password you used to purchase the song."
I can play songs from my husband's library. I can't drag them into my library.
If deauthorizing/authorizing is the solution, who needs to do what? We've got three computers and two iTunes accounts.

How to make a Button to work Actively even if there is a mandatory field..?

Hi All..
How to make a Button to work Actively even if there is a mandatory field to be fulfilled..???
I am badly in need of this logic, as i have to incorporate in my code..
Points will be rewarded without fail..

Hi Pavan,
I also faced the same requirement. U can do one thing like remove the obligatory keyword of that parameter/select-option. U can handle the same using the program in at selection-screen event. See this sample of code,
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_land1 for T005-LAND1 <b>[Needs to be mandatory]</b>                 no intervals no-extension.
SELECT-OPTIONS: s_panid FOR zoindex_val-zopanid.
SELECT-OPTIONS: s_effdat FOR zoexchrate-zedate.
SELECTION-SCREEN END OF BLOCK b2.
*-- AT SELECTION-SCREEN
AT SELECTION-SCREEN.
CASE sscrfields-ucomm.
*-- Obligatory Country Code
IF s_land1[] IS INITIAL.
    MESSAGE e050 WITH text-050.
                 "Please select the Country Code
ENDIF.
So whenever u do F8/Enter other than that push button, it will prompt u to enter the country code first then only u can proceed.
Hope this would help u in some way. Please do reward the helpful answers.

Best way to implement confirm button in conjunction with menu ring selections

So basically I have a series of menu rings that implement different cases of a structure that adjusts PWMs and other timing signals. I have received a request to add in a confirmation button/dialog that pops up to make sure the operator wants to perform the selected operation. I'm doing this on a PXI 7831R FPGA board and have run into timing violations in the past, so the less timing critical, the better. If there is some way to offload this onto the host VI, even better. Thanks in advance for the help.

If there is some way to offload this onto the host VI, even better.
Considering the FPGA does not support dialogue boxes or event structures, you will have to implement this into a host VI.
My suggestion? Have a case structure with a latch boolean control on it (ie. update config). Your host VI will have an Open FPGA VI reference and run the FPGA this way. When you want to update the config, you can change your items, then hit 'update'. Include the dialogue box for confirmation if you wish. When this is done, it will use a read/write control to update the boolean 'update config' on the FPGA. Your FPGA VI will then read that case structure with the config data in it once(since it is a latched boolean) and then continue on its merry way.
Rob K
Measurements Mechanical Engineer (C-Series, USB X-Series)
National Instruments
CompactRIO Developers Guide
CompactRIO Out of the Box Video

Automatic logout in SAP System after Pressing Confirm button

Dear all,
We have Stock confirmation Transaction(ZTransaction) coming from SAP System through ITS. Our Issue is When user click on Confirm button in that transaction, background process will run. It is more like running Replenishment in ICH. Then user will be able to see the order pager after 45 min,after pressing Stock confirmation button. but the user is still alive in backend system, this will causing load on the backend system. So want to set automatic logout from that system after pressing confirm button in that transaction.
Can anyone help me or guide the logic to implement in ABAP Program.
Note: User will access this Transaction through Portal.
Rgds
PRadeep

Dear all,
There are two function modules are available...they are as follows.
TH_DELETE_MODE(Session will delete)
TH_DELETE_USER( Total login will delete)
Rgds
PRadeep

Confirm button disabled for Reporter in Solman 7.1 SP10, Incident managment

Hello,
we are using CRM_UI for Incident managment. When the ticket is in status "Proposed Solution" , Reporter is not able to confirm the ticket, "Confirm" button is disabled. How to enable this button?
Renato

Hello Renato,
Please check authoraziton object b_userstat mentioned at belowed thread:
Reporter not able to confirm the Incident in SolMan 7.1 SP6
BR,
K.

HT1688 I can not restore and upgrade my Iphone 4. When i plug in to computer itune's restore and check for update buttons are not active.

I can not restore and upgrade my Iphone 4. When i plug in to computer itune's restore and check for update buttons are not active. What is that mean?

Razmee,
Guess what? After posting, I read another thread on this topic where someone said they went to an Apple store and the tech person there added the optional username and password in the Outgoing Mail Server boxes, and then reset the phone again. Although I had tried resetting and restarting a few times today, I had NOT reset it after entering the username and password into the optional fields.
When I entered my username and password into the optional fields, the iPhone entered checks (ticks) to the right of every entry; it had not done this earlier. (I didn't reset at this time, and the outgoing mail would still not transmit).
So just now, I reset it and the outgoing email was sent!
Thanks to you and this forum, it's a great ending to a few frustrating days.
I hope this message helps others. Not only does everything have to be entered correctly in the respective boxes; but once everything is entered and you press the "Done" button, every box should then have a check mark next to it and then you must reset the phone.

Spelling and grammar buttons are not active

I can not use spelling check nor grammar check because when I go in to Preferences my grammar buttons are not active and i can not click on my choices. Can anyone help me?

Preference in Office Words
You should ask your question in the newsgroup run by Microsoft:
http://www.microsoft.com/mac/community/community.aspx?pid=newsgroups

Confirmation button is de-activated

Similar Messages

Maybe you are looking for