Conflict with the domain/user management

Unfortunately I configured the domain management twice with the Adobe server.
As a result, the edcprincipalentity table has duplicate records (i.e my name appears twice in the table).
I removed the duplicate domain and synchronized but I still able to see those records.
Due to this issue, the AWS_ASSIGNED_ID field in the form shows Id of 'System Context Account' using which i'm unable to populate the logged in user's details.
Any idea to remove the duplicate records?
Thanks,
Nith

I traced my workflow and form I figured out there's something wrong with the process so that the logged in user details are not appearing.
I tried opening the edcprincipaluserentity & edcprincipalentity tables to verify the assigned Id value of my principal.
There I noticed the duplicate entry. I confirmed that each entry has duplicated in the table. Hence the process doesn't recognize the assigned id.
Yesterday I tried re-installing the adobe suite and configured the domain again from scratch.
Now it is working without any issues.
Thanks & Regards,
Nith

Similar Messages

  • Adding a domain user to the admin role within the local user management breaks all metro apps for all users!!

    Hi,
    I have posted this in another large thread under the "Windows 8 General" group but have not had any appropriate feedback from MS.
    After hours of testing and working with other users I have managed to isolate a simple situation that breaks all metro ui applications within Windows 8 for all users on the machine. Here are my exact steps and notes.
    Before continuing if you are running Avast then your solution may be to turn of the behaviour shield functionality as this also breaks metro apps. This is NOT the problem we are having!
    I have performed 3 cleans installs after isolating the problem and am able to reproduce the issue every time using the same steps on two different machines. 
    First thing to say is that for us it has nothing to do with simply joining the domain, domain/group policies nor does it appear to have anything to do with the software we installed, the problem here is much more simple but the result is pretty terrible.
    Here are my exact steps of what I did to reproduce our problem:
    Complete format of HDD in preperation for a clean install
    Clean install performed
    Set up the machine initially with a local account
    Test metro apps - all working fine
    Open control panel from the desktop, click on System, change the system to join the domain, click reboot
    Log into the system using my domain account
    Test metro apps - all working fine
    Here's were the problem starts. I need my domain account to have admin rights on the local machine so I can install programs without the IT men having to come over and enter their password every 5 mins.
    I go to control panel via the desktop and click on User Accounts. From with here I then click on "Manage User Accounts". This requires the IT guys to enter their details to give me access to such functionality. This is fine
    In the dialog box that opens I can only see the local user that was initially created during setup. The "Group" for this local account shows as "Administrators" - Image included below (important to note that metro apps are working at this point)
    I click add and then add my domain account - also giving it administrator access
    Sign off or reboot to ensure the new security is applied
    Sign back in to the domain account
    Test metro - ALL BROKEN
    Sign out
    Sign in as local account
    Test Metro - NOW ALL BROKEN FOR THIS USER ALSO
    So as soon as I add my domain account to the local user accounts and set it as admin it breaks all metro apps for all users. This is on a totally clean install with nothing at all installed other than the OS.
    Annoyingly if I go back and change the domain account to a standard user or if I totally remove the domain account from the local account management system the problem does not go away for either user. basically it is now permanently broken. The only fix I
    could fathom was a full re install and not giving the domain user admin access to the local  machine.
    Screen one - this is the local user accounts window AFTER joining the domain and logging in with my domain account (All metro apps working at this point)
    Screen 2: User accounts AFTER joining the domain and AFTER adding domain account to local user management (METRO BROKEN)
    I have isolated my machine from all group policies so nothing like that is affecting me. Users I have spoken to in different companies have policies that automatically add users to the local user management. This means that metro apps break as
    soon as they join the domain which leads them to wrongly think it is group policies causing the error. Once they isolate themselves from this they can reproduce following my steps.
    Thanks

    Hi Juke,
    Thank you for the response and apologies for the delay in getting back to you. My machine was running a long task so I couldn't try your suggested solution.
    I had already tried running the registry merge suggested at the top of the thread to no avail. I had not tried deleting the OLE key totally so I did that and the problem still exists. I will post all the errors I see in event viewer below. For
    your info, since posting my initial comment I have sent out my steps to 7 different people and we can all reproduce the problem. This comes to 10 different machines (3 of them mine then the other guys) in 3 different businesses / domains. We see the same errors
    in event viewer.
    Under "Windows Logs" --> "Application" : I get two separate error events the first reads "Activation of app winstore_cw5n1h2txyewy!Windows.Store failed with error: The app didn't start. See the Microsoft-Windows-TWinUI/Operational log for additional
    information." The second arrives in the log about 15 seconds after the first and reads "App winstore_cw5n1h2txyewy!Windows.Store did not launch within its allotted time."
    Under "Windows Logs" --> "System" : I get one error that reads "The server Windows.Store did not register with DCOM within the required timeout."
    Under "Applications And Services Logs" --> "Microsoft" -->  "Windows" --> "Apps" --> "Microsoft-Windows-TWinUI/Operational" : I get one error that reads "Activation of the app winstore_cw5n1h2txyewy!Windows.Store for the
    Windows.Launch contract failed with error: The app didn't start."
    If you require any further information just let me know and I will provide as much as I can.
    Thanks

  • Could not start the listener with a domain user

    Hi all,
    I am working on Windows 2003 with Oracle 10.2.0.2 !
    With user "local system account", I can start the listener and I have no problems!
    after chaning the user that runs the listener from local system account to a domain user, I cannot start the listener again!
    (for the oracle service itself for the database, is it possible to change the user from local system to that domain user without problems)
    attached the error message when starting the listener with cmd.
    by starting the listener with the restart of the windows service, the listener crashed down after a few minutes
    do I have to set additional permissions for that domain user?
    thanks in advance
    Stefan
    C:\Documents and Settings\Administrator>lsnrctl start listener
    LSNRCTL for 32-bit Windows: Version 10.2.0.2.0 - Production on 17-JAN-2008 11:51:29
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    tnslsnr wird gestartet: Bitte warten...
    TNS-12537: TNS: Verbindung beendet
    TNS-12560: TNS: Fehler bei Protokolladapter
    TNS-00507: Verbindung beendet
    32-bit Windows Error: 109: Unknown error

    In this case I see three error messages:
    TNS-12537:     TNS:connection closed
    Cause:     "End of file" condition has been reached; partner has disconnected.
    Action:     None needed; this is an information message.
    TNS-12560:     TNS:protocol adapter error
    Cause:     A generic protocol adapter error occurred.
    Action:     Check addresses used for proper protocol specification. Before reporting this error, look at the error stack and check for lower level transport errors. For further details, turn on tracing and reexecute the operation. Turn off tracing when the operation is complete.
    TNS-00507:     Connection closed
    Cause:     Normal "end of file" condition has been reached; partner has disconnected.
    Action:     None needed; this is an information message.
    The most important is the tns-12560 error message, this means that an unsupported protocol exception was raised. Assuming you are using the same environment configuration when starting the listener with the local account and starting it with the domain authenticated user, then it has to do with permissions. Both the local administrator account and the domain authenticated user must belong to the ORA_DBA group, otherwise the user won't have enough privileges to start the listener.
    On the other hand, make sure the sqlnet.ora file includes this line:
    SQLNET.AUTHENTICATION_SERVICES= (NTS)
    If you use a domain user name, log on under a domain with username and password which has administrative privileges on each node
    ~ Madrid

  • The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, cont

    I have a user on an iMac 10.6 connected to our domain.  She uses Outlook web access for email on our exchange server.  Last week she received the following message which is randomly preventing her from sending emails.  She claims no attachment was involved in the original email when this all started.  I have not been able to look at her account as she is out of the office but maybe someone else dealt with this issue.  I realize this may not be Mac related but thought I'd give it a try.  She did say it occurred once over two days while working on a PC but it continued over the past weekend.
    If an internal user tries to send a message with infected attachment using Outlook Web Access, it may report the following error message: The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, contact technical support for your organization.
    This is because F-Secure Anti-Virus for Microsoft Exchange has detected a virus in the attachment. If the user tries to send the message again, the message will be sent but without the attachment. At the same time a blank message with an attachment named "Attachment_information.txt" will remain in the user's Drafts folder. The "Attachment_information.txt" will contain information about the virus detected in the message.

    PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
    If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

  • Can we map three BPC users with single domain user

    Hi..
    When we map the three BPC users in the ABAP server in the program UJA3_WRITE_SYS_USERS with domain user,can we map with only one domain user for all three BPC users or we have to use three different domain users to map the three BPC users?
    Please do reply
    Thanks
    Bobby

    yep
    u can map three bpc user with single domain user.
    but domain user must have management roles.

  • "conflicts with the WAN IP address"

    I just picked up a used AirPort Extreme N (Gigabit Ethernet) to replace my current non-Apple router, which has worked satisfactorily but lacks the ability to share disks--something I need. Using my G5 running 10.4.11, I downloaded AirPort Utility 5.4.2 to set up the new (to me) device, and did a factory reset just to clear everything out. I placed the AirPort in the network exactly where the old one had been--with its WAN port connected to the line supplied by my ISP (see below) and its three other ethernet ports connected to various clients. Then I ran into a problem:
    Under the "Internet" icon of Airport Utility, I set it to Connect Using Ethernet, and Configure IPv4 using DHCP (My current router uses DHCP to provide IP addresss to both the wired and wireless devices on my network). The numbers below that are: IP address 192.168.1.12, subnet mask 255.255.255.0, and router address 192.168.1.1.
    The first field of the line labeled "DNS Server(s)" defaults to 192.168.1.1, while the second field is empty, as are the fields Domain Name and DHCP Client ID. I left Ethernet WAN port on "Automatic" and put "Connection Sharing" on "Share a Public IP address," since I believe its combination of DHCP and NAT offer the best security.
    The problem: When I click the "Update" button to confirm my settings, I get this message: "The DHCP range you have entered conflicts with the WAN IP address of your Apple wireless device."
    Although I am unclear as to why the Internet Connection pane of the AirPort Utility lists "IP address" and "Router address" as two separate numbers (aren't they referring to the same device, the AirPort itself? How can it have two IP addresses?), I figured that I could play it safe and change the starting number to 192.168.1.13 to avoid the conflicts with 192.168.1.12.
    But I still get the same error message when pressing "update." I tried changing the range to 192.168.1.50 - 192.168.1.60, and I still get the same error message. There seems to be no range that the utility will accept as non-conflicting with the "WAN IP address" of the Airport.
    My ISP did not provide a visible modem as others in the past have done. The internet connection they left me simply comes out of a box on the back of the house that is connected by fiber optics to (presumably) a fiber optic line out in the street. However, this "supply line" has always worked fine with my non-Apple router and--after disconnecting the AirPort that had temporarily taken its place--is working right now as I throw this question to the forum.
    Additional notes:
    * Under the NAT tab, the box "Enable NAT Port Mapping Protocol" is checked, as it was by default) while "Enable default host at" is unchecked and blank.
    * While I currently have wireless turned on in the AirPort, I haven't even tried wireless connectivity yet and want to make sure my wired connectivity is working first.
    Thanks for any assistance.

    The problem: When I click the "Update" button to confirm my settings, I get this message: "The DHCP range you have entered conflicts with the WAN IP address of your Apple wireless device."
    This error message typically indicates that your 802.11n AirPort Extreme Base Station (AEBSn) is receiving a Private (as opposed to a Public IP address) on its WAN port. That could be because your ISP does not provide any device (computer or router), that is directly connected to their "box," with a Public IP address.
    Your AEBSn is both a DHCP client (on the WAN-side) and a DHCP server (on the LAN-side). The Configure IPv4 is basically the on/off switch for the AEBSn's DHCP client. It's other option, PPPoE, would only be used if your ISP requires it.
    One option would be to reconfigure the AEBSn as a bridge. This would disable both the AEBSn's NAT & DHCP services.
    Although I am unclear as to why the Internet Connection pane of the AirPort Utility lists "IP address" and "Router address" as two separate numbers (aren't they referring to the same device, the AirPort itself? How can it have two IP addresses?
    The IP address information on (actually the TCP/IP pane) is showing you the AEBSn's WAN port settings. Settings that with Configure IPv4 set to Using DHCP would come from the DHCP server upstream of it. If this server was providing Public IP addresses then the values in both the IP Address & Router Address fields would not be in any of the three valid Private IP Address ranges (10.x, 172.x, or 192.x)
    Under the NAT tab, the box "Enable NAT Port Mapping Protocol" is checked, as it was by default) while "Enable default host at" is unchecked and blank.
    This setting would not have anything to do with the error message that you are getting. Instead, this option is used as an on/off switch for the NAT-PMP protocol. This protocol is similar to non-AirPorts' UPnP protocol.
    While I currently have wireless turned on in the AirPort, I haven't even tried wireless connectivity yet and want to make sure my wired connectivity is working first.
    Both wired and wireless clients will be impacted by this until resolved. I again, suggest that you try reconfiguring the AEBSn as a bridge. (ref: AirPort Utility > Select the AEBSn > Manual Setup > Internet > Internet Connection > Connection Sharing = Off (Bridge Mode))

  • Logging on with the same user?

    Hi all,
    I know there is some rule that allows a user to log on more than once. A client of mine says they could always log in to the same company twice with the same username, but now they can't. They can only log on to 2 different companies with the same user name.
    Was there a change made or am I missing something? I have tested on a single computer. I open 2 instances of SAP Business One 2007 and log in with the same user into the same company. THe first one logs on fine, the second one says "This user is already connected to this company". If I log on to a different company with that user it logs in.
    I really thought you could log on with the same user to the same company.
    The company has a distributed environment and people run around every now and again logging on at different computers (especially supervisors). This is a critical issue for them.
    Please help
    Thanks,
    Adele

    Adele,
    I am not sure if you might have changed the default layout of SQL Management Studio, so you should
    log on to Management Studio and go to Menu 'Window' -> 'Reset Window Layout'.
    This will restore the default layout, which usually is the very same after a fresh SQL Server 2005 installation.
    Now you should find on the left hand side the so called Object Explorer. In the Object Explorer Window you should see the SQL Server name, below of this should be
    SQL Server name
    +Databases
    +Security
    +Server Objects
    +Replication
    -Management
          +Mantenance Plans
          +SQL Server Logs
              Activity Monitor
    +Notification
    Maybe there are some more entries, depending on the options choosen during installation.
    Kind regards
    Mario Schoenberg
    Senior Support Consultant
    SAP Business One Forums Team

  • The domain users without administrative permission cannot install printers shared on printer server

    Dears
    We have a printer server that OS is Windows server 2003 .And all clinets are installed windows 7.Now,the domain users cannot installed printers shared on the printer server.When i logon the clinent computer with a domain user and access printer server by
    URL \\192.168.37.1 ,i can see all printers shared on the printer server.Then i double click on printer to install it on client computer.It will ask me to input user name and password of local administrator .  
    How to install the printers with domain user directly. Thanks

    refer step #8:
    http://blogs.msdn.com/b/7/archive/2011/07/11/allowing-standard-users-to-install-network-printers-on-windows-7-without-prompting-for-administrative-credentials.aspx
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Error U9KP7Q94 when logged in with the deleted user after its recreation...

    Hi All,
    How to get default screen for the deleted user when we recreate the same user with same name?
    i have deleted the user for ex. 'XYZ' (from the catalog user group managemet) and when again i am trying to browse the obiee with the same user i.e. XYZ (after passing the authentication using some LDAP) then i am getting the error like 'Error U9KP7Q94'.
    can anyone help me in this..
    thanks
    Edited by: user10946827 on Apr 26, 2009 4:32 AM

    I don't really see your problem. Do you have any error message ?
    You may have may be a security problem.
    Have you see in the catalog manager if you have the right / grant for the user on the report.
    You can log as administrator / go to the catalog manager / shared folder / catalog root / users /
    - on your user / in the items properties, set the owner ship to the administrator
    - go to the security icon of the directory user
    - give the access to the administrator
    and then you have access to the directory
    To see the grant of each file, you must do the same manipulation (become the owner, change the security, ...)
    Success
    Nico

  • Is it possible to play oBo Word Snake without conflicting with the pulldown notifications screen? If not is there another similar app to get addicted to?

    is it possible to play oBo Word Snake without conflicting with the pulldown notifications screen? If not is there another similar app to get addicted to?

    Hi,
    There will be a “Post” list in that user’s MySite storing all the blogs that below to that user, we can delete all the blogs in that list if with sufficient permission in that
    user’s MySite.
    Best regards,
    Patrick
    Patrick Liang
    TechNet Community Support

  • This is an message when I open up CS4 in Illustrator.  "Some plugins in additional plugins folder are conflicting with application or user plugins.  It will skip loading plugins from additional plug-ins folder?  What does this mean and how can I fix it.

    This is an message when I open up CS4 in Illustrator.  "Some plugins in additional plugins folder are conflicting with application or user plugins.  It will skip loading plugins from additional plug-ins folder?  What does this mean and how can I fix it?

    Thanks Larry.  I thought so.  I will do this weekend.  Again, I appreciate your help.
    Trying to get updated software – I am not a fan of the cloud stuff.  Nothing I can do about it.
    Thanks again Larry!

  • Conflict with the component names

    Hi everybody,
    I think I have a conflict with the names of the components. Let me explain to you.
    On the first window, I have a component described like this :
    Component Type -> Text Input Component
    Component Name -> ArgoLineClientV2R4_Text_1_txf
    On another window, I have this :
    Component Type -> Graphics Component
    Component Name -> ArgoLineClientV2R4_Text_1_txf
    As you see, these components have the same name but are different type. With the first, I manage to write the word in. With the second, I want to extract a word but I can't.
    So, I would like to know the reason. Is it because the components have the same name? Is it because the second component is a Graphics component ?
    Thanks for your time.
    Best regards.
    Romain.

    Hi Oliver, thanks for your answer.
    ArgoLineClientV2R4_Text_1_txf is the technical name, given by Jubula during the object mapping. In my program, I use different names of course.
    These two components have different functionalities. With one, I write a word in; and with the other the software gives me an information (a word). With the second, i can only read the information and I need to take this information to put it in a String variable. So I tried to extract this information but I (my program) failed. I wanted to make a clic and make a copy of the word. But when I try to clic, my test fails.
    I think it is because Jubula describes this component like a Graphics Component whereas in the software parameters, this component is a text field (in mode ReadOnly but a text field).
    Here is my situation.
    Regards.
    Romain

  • SQL error msg - The DELETE statement conflicted with the SAME TABLE REFERENCE constraint

    Executed as user: ****. The DELETE statement
    conflicted with the SAME TABLE REFERENCE constraint "FK_PARENT_TASK_REF".
    The conflict occurred in database "****", table "****", column
    'PARENT_TASK_ID'. [SQLSTATE 23000] (Error 547) The statement has been
    terminated. [SQLSTATE 01000] (Error 3621). The step failed.
    Does this error msg indicate the whole script failed to execute or was it just a single step/task that failed ?
    What does error msg mean ?
    Anyway to prevent this error msg and ensure script runs successfully

    Hi mdavidh,
    This error occurs because the record  'PARENT_TASK_ID' was referenced by 'FK_PARENT_TASK_REF'.
    Please refer below codes:
    CREATE TABLE MyTable (
    ID INT, primary key(ID), -- primary key
    ID_Parent INT foreign key(ID_Parent) references MyTable(ID), -- foreign key reference the same table
    insert into MyTable(ID,ID_Parent)
    values(0,0);
    insert into MyTable(ID,ID_Parent)
    values(1,0);
    insert into MyTable(ID,ID_Parent)
    values(2,0);
    insert into MyTable(ID,ID_Parent)
    values(3,1);
    insert into MyTable(ID,ID_Parent)
    values(4,3);
    insert into MyTable(ID,ID_Parent)
    values(5,4);
    CREATE TRIGGER MyTrigger
    on MyTable
    instead of delete
    as
    set nocount on
    update MyTable set ID_Parent = null where ID_Parent in (select ID from deleted)
    delete from MyTable where ID in (select ID from deleted)
    Now we could delete records.
    delete from MyTable where ID_Parent=0
    Thanks,
    Candy Zhou

  • How can I get Firefox to run on a network with multiple users logging on with the same user name and password?

    I am trying to get Firefox running on a large network where I have multiple users that log on with the same user name and password. The problem is that when another user logs on to another computer the message comes up that their is already an instance of firefox running on that computer even though there really isn't. Only one instance can be run on the network at one time. I believe it is because firefox stores a shared profile as it thinks it is actually the same user even though it is being run on another computer. I repeat that each user that logs on uses the same user name and password but on different computers.

    I am trying to get Firefox running on a large network where I have multiple users that log on with the same user name and password. The problem is that when another user logs on to another computer the message comes up that their is already an instance of firefox running on that computer even though there really isn't. Only one instance can be run on the network at one time. I believe it is because firefox stores a shared profile as it thinks it is actually the same user even though it is being run on another computer. I repeat that each user that logs on uses the same user name and password but on different computers.

  • Numbers does not open with the main user after installing mountain lion. It works flawlessly when I use the second account on my mac. What got corrupted in the admin-account, something in the user-library? How can I fix it? I´m kinda desperate...

    Numbers does not open with the main user after installing mountain lion. It works flawlessly when I use the second account on my mac. What got corrupted in the admin-account, something in the user-library? How can I fix it? I´m kinda desperate... (the same happens with the other iWork-Apps!)
    Looking forward to hearing from somebody with a littlemore expertise than me, Chris

    you can remove preferences files by navigating to the Preferences folder for your user as follows:
    0) Quit ALL iWork apps (Keynote, Pages and Numbers)
    1) from the Finder select the menu item "Go > Go To Folder…".  This will bring up a dialog:
    2) enter the path "~/Library/Preferences" (no double quotes)
    3) find the files:
    com.apple.iWork.Keynote.plist
    com.apple.iWork.Numbers.plist
    com.apple.iWork.Pages.plist
    and move these to the trash.  I would NOT empty until later.
    4) restart Numbers

Maybe you are looking for