Confused between getting an APPLE TV or VGA cables...
Hey Folks.
Im not sure if I should get an APPLE TV or a VGA cable to connect my MacBook Pro to my LCD TV... what do you recommend. Im a heavy film buff, so I watch a lot of movies - with that said, APPLE TV seems like a good selection since I can purchase a movie without actually leaving my house to the store nor having a hard copy, all is stored on the APPLE TV (correct?)
question; how long does it take to download the movie? Or is it streemed?
Moreover all the films must be in iTunes correct? For example, I do a lot of shoots on my HD video camera and I love to mess around in Final Cut - now those films I would make I would need to transfer them into iTunes (what format?)
What else??? Basically Im just trying to see the benefits of having an APPLE TV.. let me know your honest thoughts.
my best,
-Joey
Without doubt a VGA cable will do the job with front row, although you won't be able to rent HD movies. It is however a matter of choice as to whether you can put up with the inconvenience of the cable.
You can purchase content from either the mac or the tv, but anything purchased on the tv will be transferred to the mac.
The time these purchases take to download will vary depending on size and the speed of your internet connection, anything over 6 Mbps should be able to let you start watching almost immediately.
Final Cut and imovie both have options to convert to an tv format, there isn't really any need to know more but essentially it's h264 up to 5 Mbps, you can go up to 540p with NTSC or 720p with PAL or 24 fps.
I think it will make a great addition to your home but then I have a number of them so I clearly like them.
Similar Messages
-
If I get the Apple Universal Dock , what cable do I then need to get video to my HDTV ? What about the audio portion ?
OK, so that part is correct. Then, do I just hookup and it automatically goes onto my computer? What will capture it, or will it simply show on my desktop and I need to open it with...what?
-
HT201335 Since I updated iOS on my iphon4s and iPad mini i cant get mirroring to work via vga cable
Since I updated iOS on my iphon4s and iPad mini i cant get mirroring via my vga-cabel to my smartboard projector to word anymore. I used to be able to swipe right twice to chose mirroring via my Apple cable. Why doesn't it work anymore?
All the threads I can find on the subject talks about using appletv but I need to connect via cable! It used to work (before ios7).
Sincerely Bent FThe article from which the issue was posted clearly explains how to access AirPlay in iOS7.
Granted, what is being attempted has nothing to do with AirPlay or Mirroring.
The feature that you're looking for is in Control Center... assuming the cable actually works. If it does not work, the feature will not be accessible. -
I have purchased a new iPad and given my old one to my husband. How do I change the Apple ID over to him. We are having continuous confusion between the two iPads
Hi Marg42,
Thanks for visiting Apple Support Communities.
First, your husband can create his own Apple ID via the web, computer, or iPad, if he hasn't already:
My Apple ID
https://appleid.apple.com
iTunes: How to set up an Apple ID within iTunes
http://support.apple.com/kb/ht2731
Next, he can sign out of the Apple services that are currently using your Apple ID on your old iPad, and sign in with his own.
This article has instructions for doing so for specific Apple services:
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796
Alternately, he can erase the device and set it up as new using the steps in this article:
iOS: How to back up your data and set up your device as a new device
http://support.apple.com/kb/ht4137
Best Regards,
Jeremy -
Is there a way to get an apple mail folder exported to outlook mail folder structure? I'm using Gmail on my IMAC and have a PC for work. Want to share folder structure between systems.
Use following steps to import apple mail to outlook:
Choose Mailbox->Export Mailbox, or choose Export Mailbox from the Action pop-up menu
Choose a folder or create a new folder where you want to store the exported mailbox.
Outlook for Mac: Choose File->Import Mailboxes. Select the mail application you want to import messages from.
If it does not work then you should use third party apple mail to pst applications. You can easily search in Google about these applications. -
Does anybody know why my home sharing would stop and I cannot get the Apple TV to recognise the ID or possibly the password? Nothing was changed and it stopped. Now I've done everything including new apple ID and password but it still wont connect.
Either the most recent updates to iTunes or the Apple TV have changed connectivity to one another. Review the following link as the configuration presented may not be the same as yours but the concepts are the same. Once completed, you will have connectivity back.
Solution for Apple TV 2, Xfinity router, Ethernet connection and Home Sharing -
I have an older 8GB black iPod Touch (no bluetooth) no longer supported by tech. It is "locked" in restore mode. When I do a 2 button reset I can get the Apple logo but then it pops back to the synch cord-and-music disc icon indicative of restore. Any advice?
Hello honeycrisp70,
For that error, check out the article below for additional troubleshooting to get it sorted out. If it continues then you may need to contact Apple support.
Resolve iOS update and restore errors
http://support.apple.com/en-us/TS3694
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
Regards,
-Norm G. -
Tried hooking up my mac mini using the apple mini displayport to vga cable to my 22" acer monitor but im getting nothing. At the same time I hooked my tv to the hdmi connection and could see in the display settings on the mini that a dialogue box for the settings for the acer had appeared but no signal on the monitor itself.....any ideas?
Try resetting the PRAM.
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
(from http://support.apple.com/kb/ht1379) -
just started a new apple tv and also started using an iMac . I have itunes on the iMac but i cant get the apple tv to sync or find any settings to do so ! How can I get the iMac and apple tv to sync the itunes ? i have a internet connection between them , I have signed in to the itunes store on the apple tv and it shows that the apple tv is sharing my library from the IMac , but it wont sync and the apple tv has no content !
Welcome to the Apple Community.
The Apple TV (with the exception of the Apple TV 1) does not sync, it streams everything from your library on your computer or from the internet. -
My ipad2 has suddenly decided not to connect to the internet either through Safari or email. My WiFi signal is strong and all other devices in my house are connecting ok. I have tried pressing the home and off buttons together to get the Apple Logo but this has not changed anything, still cannot connect. "Safari cannot open the page because your ipad is not connected to the internet"
I have done this and no difference
I have just realised what has caused the problem.
Yesterday I fitted an additional Homeplug with built in wireless N adapter ( I alreday have another type fitted from my main router position) The wireless system to my ipad is obviously "confused" . Having now removed the second homeplug and reset my ipad all is now ok -
My laptop has crashed and I'm in between getting a new one but need to update my iOS on my iPad, is there anyway of doing this without a laptop or computer?
If you can't update via wifi, you can use a friend's computer, or an Apple store will do it for you.
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 4: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom
PS When you get your new computer.
Sync Your iOS Device with a New Computer Without Losing Data
http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
https://discussions.apple.com/docs/DOC-3141
Message was edited by: Texas Mac Man -
Pioneer AVH-X3600DAB and Apple lightning to VGA adapter.
Hi I have a Pioneer AVH-X3600DAB and all the relevant cables to connect my iPhone 5 including an Apple lightning to VGA adapter.Why is the Pioneer telling me the "USB is not Compatable"?
Hi gilespharrison
You need to set the ipod mode from iPod Via Usb to iPod via Bluetooth.
To do this you need to do the following.
Turn off bluetooth on your device.
Disconnect all the cables to the device.
Go into the settings on the X3600DAB then scroll down till you see the iPod connection mode click on the iPod via usb then on the next page do the same thing again it should now change to iPod via Bluetooth.
Just a FYI regarding App radio it doesnt work very well at all very buggy I think you might have better luck with and android device and the Mirror box.
Good Luck.
Let me know if you end up getting Pandora to work correctly. -
Lightroom between Windows and Apple products
I have a new windows 8 desktop that I have been using for Lightroom 4 work and now I want to get a laptop and am considering the Apple but wanted to know the following:
-Can I use the same Lightroom on both my desktop and laptop?
-If i get a Apple laptop will I be able to transfer work between the two that I do in Lightroom?
-I i go this route will i have any compatibility issues that will affect performance?
Your comments are appreciated!
Jakher1927jakher1927 wrote:
-I i go this route will i have any compatibility issues that will affect performance?
Performance? Nope...but there are some issues relating to certain areas of compatibilities...for example; hard drives. On Mac you can mount and read/write FAT32 formated external drives but if the drives are formated as NTFS you'll only be able to read from them not write to them. That can be an issue is your catalog is on the drive. If you format the drives as Mac OS Extended (Journaled) your Windows machine won't see the drives unless you install a 3rd party driver (pretty easy & cheap).
But once you work out the compatibilities LR will run just fine on both Mac and Windows. -
Is there any way to project an I-Tunes purchased movie with a Proyector via the I-Pad/VGA cable? without streaming it with an Apple TV?
You may be able to get some info from the restored/erased iPod by:
How to perform iPad recovery for photos, videos
Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official
http://www.amacsoft.com/ipod-data-recovery.html
iPod recovery software to restore lost music files
http://www.pcrecoverytools.com/ipod-data-recovery.html
-iPod touch Deleted Photo Recovery Tips You Should Know -
I can get the Apple TV to output to a Samsung 24" monitor.
I can get the Apple TV to connect to my network.
I can update the software on the Apple TV.
I CANNOT get it to share iTunes from a Windows 7 computer (using the Samsung monitor) although sharing is enabled and I'm using the same ID and passsword everywhere. iTunes files are on a USB drive.
I CANNOT get it to output to any of the 4 HDMI ports on the Sharp Aquous LC-40LE700UN. That TV is 120Hz and 1080p capable. Apparently it can do all resolution below 1080p.
Ideas?And then this:
LED SHARP AQUOS LC40LE700UN Class HDTV - 1080p, 1920x1080, 2000000:1 Dynamic, 4ms, 120Hz, 16:9, PC Input, 4x HDMI LED SHARP AQUOS LC40LE700UN
SHARP AQUOS LED LC40LE700UN
Formato de Video: 1080p (HDTV)
Entrada: Audio - 1/8" Mini (3.5mm),
Component Video,
Composite Video,
Front/Side HDMI,
Front/Side RCA Composite,
HDMI,
S-Video,
VGA
HDTV Integrado: Yes
Salida: Audio - Digital Optical
Tipo de Pantalla: LCD w/ LED Backlight
Relación Aspecto: 16:9
Resolución: 1920 x 1080
Energy Star: Yes
Brillo: 450 cd/m2
Frecuencia Refresco: 120 Hz
Medida de Pantalla: 40
Display Panel
Brillo: 450 cd/m2
Reinicio a Máxima Resolución: 120 Hz
Response Time: 4 ms
Contraste: 2,000,000:1
Resolución: 1920 x 1080
Diagonal Screen Size: 46 in
Tamaño Visible: 45.98 in
Ancho/Alto: 16:9
Tipo de Pantalla: LCD w/ LED Backlight
Broadcast Standards
HDTV Built-in Tuner: Yes
Broadcast Format Supported: 1080i (HDTV),
1080p (HDTV),
720p (HDTV)
Broadcast Format Displayed: 1080p (HDTV)
Interface
Salida: Audio - Digital Optical
Entrada: Audio - 1/8" Mini (3.5mm),
Component Video,
Composite Video,
Front/Side HDMI,
Front/Side RCA Composite,
HDMI,
S-Video,
VGA
Conectores: Ethernet - RJ45,
Serial,
USB - Universal Serial Bus
Other Features
Energy Star Compliant: Yes
Características Generales: Dejudder Technology,
Digital Media Playback
PRECIO PAGO AL CONTADO : u$s 1987
http://www.novedaddigital.com.ar »
Maybe you are looking for
-
How can I print out the graph I need only, without the controls and indicators?
I'm doing some programming in LABVIEW. I need to print out only the graph, without the buttons, controls, indicators. I tried to look for such a function in LABVIEW, but in vain. How can I achieve the result I expect in my programming?
-
Hi there, Can anyone out there help, after a recent Apple software update my Epson Stylus Photo RX640 will no longer print, every other aspect of the printer works fine including the scanner but it just will not print, I sent an email to apple but al
-
How to connect to apple remote
How do I connect my Apple Remote-USA to my Nano IPod? I bought the remote a year ago, recently found it after misplacing it, and tried to pair it with my Nano IPod but it is not working. The battery is working. I tried the simple directions of hol
-
Annotations in JMS Adapter Composite
Hi, While Annotating A JMS Adapter Composite we give details of the connection factory. While deploying to another environment based on Deployment Plan how then is the queue created on the other server? Below is the Annotated PArt for the jms <!--<sv
-
Preserving Folder Tree Hierarchy using Export Plugins in 2.0
Hi Folks, I've been trying to find a plugin that will allow me to select a top level folder and then export all images preserving the folders / subfolders. i.e. Select 2008 and end up with export of all images in appropriate sub folders: 2008\beach s