Connect Pro X Connect Now

I'm developing an application to use a Acorbat Connect Pro 7.5 but I want a metting interface like a Connect Now. I want that when the presenter share his screen the some pods of the metting stays on the screen, like it happening on Connect Now.
There is a way to use the connect now add-in insted of connect pro add-in?
Or there is any other way to do that?
Thanks and regards
Mairum

You need to buy a Mac OS X 10.6 DVD, and if your computer has less than 1GB RAM, enough RAM to bring it to that number. This can be done on all Intel Macs running 10.4 or 10.5.
(91898)

Similar Messages

Adobe Connect Pro vs SCORM

There were no results for What is the difference between Adobe Connect PRO and connectivity as SCORM within Presenter? Does it impact an LMS system in anyway if you select Adobe Connect Pro?

Adobe Connect is, technically, an AICC compliant reporting server.
However, when you enable reporting for Presenter (any of the settings), it outputs both the AICC reporting files and the SCORM reporting files. You can verify this by looking for files labled scorm in the output. Just be sure you select the appropriate SCORM settings when you are going to be placing the output on a server that is expecting it.

Macbook Pro died and now won't connect to the internet

I just got home from college and my Macbook Pro died while I was using it because I couldn't find the charger in time to plug it in (stupid mistake that I never ever let happen usually). After I found it, plugged it in, and started it up again, the date and time were messed up on the computer. I reset them to normal and tried to connect to the internet using my old settings, but it hasn't connected.
I've tried a lot to try and fix it so far and it still won't connect. Other computers and devices (HP and Dell laptops, iPod touches, PS3) that my family have and use all work and connect to the internet fine.
I've tried to run the Network Diagnostics and after plugging in all of my settings and information, it says that it can't fix it. Next to it on the left, the Airport, Airport Settings, and ISP are all green...but the Network Settings is yellow and the Internet and Server are red.
I've deleted my internet settings and tried recreating them and that hasn't worked either. I have also tried the Assist Me portion to make a new connection - no luck there.
I've also tried resetting the Macbook Pro and the router (an Actiontec router for Verizon FIOS) multiple times and that hasn't worked either.
I unfortunately can't use Time Machine either because I don't have an external hard-drive and haven't set it up.
I just don't really know what to do at this point. Hopefully someone can help me out!

Same problem--hoping to get Apple's attention by throwing my hat in the ring with everybody else.
Things tried (now approaching 2 weeks of failure):
Deleting "Airport" Connection, Adding/Restarting/Re-adding/etc.
Archive Install
Erase & Install (full reinstall done by Genius)
Card Replacement
Bluetooth Replacement
Zapping the PRAM
Trying different connections/routers/locations/connection types/etc.
Visited Genius bar 4 times now.
Have been without the computer longer than I've been with it.
Trying to change over from a horrifically bad Dell to a refurb Mac worked once before...though I've come to believe: It's not the refurb, it's not the hardware, it's not the settings, it's not the router, it's not the install, it's not the associated software, it's not the connection, it's not the Super Moon that comes up tomorrow...It's a hardware issue as this has been happening since I opened the computer out of the box, and we have an identical computer running identical programs on an identical network with the identical updates and NO problems whatsoever--I'm assuming the innards may have been cheap'ed out somewhere to save a buck or a connector is faulty after a particular build date?
Full symptom list (in no particular order):
Connection Timeout
Connection Drop
Not recognizing Airport
Card Recognition but endless connection time
IP non-recognition
Random re-connect
Indication of connection without transmitting/receiving data
Frustrated Mac lover trying to convert a Dell user...
APPLE, WHERE ARE YOU!?

Hi I have two macbook pro, i connected one from another via lan cable , now when i removed it, its showing me some pop up again and again saying server may not exists and there was a problem connecting to ishan's macbook pro

Hi I have two macbook pro, i connected one from another via lan cable , now when i removed it, its showing me some pop up again and again saying server may not exists and there was a problem connecting to ishan's macbook pro

If you just reboot it, does the problem go away?

HT1329 i have re-installed I-tunes and have a new operating system (Win 7 Pro). I now cannot sync as I-tunes says my I-Pod is already connected to a library and wants to erase my music on the I-Pod. What do i do to get around this problem?

I have re-installed I-tunes and have a new operating system (Win 7 Pro).
I now cannot sync as I-tunes says my I-Pod is already connected to a library and wants to erase my music on the I-Pod. What do I do to get around this problem?

An iPod is designed to be synced with only one computer/iTunes library at a time. If you try to sync the iPod with a new/different iTunes library, iTunes on the new/different computer will replace the contents currently on the iPod with whatever is currently stored in its own library.
If the music and content on your iPod is not in iTunes or in a backup somewhere you can use the information in this user tip from another forum member turingtest2 to help you copy this content from the Nano back to the PC and into iTunes.
https://discussions.apple.com/docs/DOC-3991
B-rock

Windows 8 pro and 8.1 pro WiFi connection issues

I hope to start a meaningful dialogue with Microsoft about the WiFi issues that Windows 8 and 8.1 have.
I've been deploying Windows 8 and 8.1 since the Surface Pro was released. Since then we've deployed about 50-75 Surface Pro, Surface Pro 2, Dell Latitude 7000 series, Lenovo Yoga 13 IdeaPad and Lenovo Yoga Thinkpad devices. Some have Windows
8 pro, some have been upgraded to 8.1 Pro, and some were purchased with native 8.1 Pro builds on them. All of these devices have difficulty with wireless in one form or another. We were able to reduce some of the problems (not eliminate) on our
corporate LAN over the last year by turning off Windows' ability to turn off the wireless adapter to save power, or turning off some of the offload or chimney or other advanced capabilities of the adapters. Problems were still present, but less so.
Many of our users were able to be on the wired LAN, so the issues were somewhat glossed over.
We were finally able to fix our Wireless LAN issue (we believe everything is working as expected after 2 weeks of testing and observation) by updating the controller and AP firmware for our Aruba wireless infrastructure (we have one controller and 11 ap's
across 5 well connected sites). This is great- sort of...
The problem is that while it's now very obvious that in our case, updating the firmware on our corporate WiFi is able to get the various 8 and 8.1 devices working on our LAN, this is not a true fix as it does not address our mobile and wireless capabilities
while:
1. traveling
2. working at a partner's or customer's location and connecting to their WiFi
3. Working from Home
4. Etc.
We obviously can't update everyone's AP/wireless router firmware. The solution, by necessity, must reside on the Windows 8/8.1 machine and it's inability to reliably connect and stay connected to existing Wifi networks. I want
to know the current state and thinking that Microsoft has regarding this persistent issue (searching for "Windows 8.1 wifi" in the "Windows 8.1 IT pro" forums on TechNet returned 4000+ results). Ignoring or not addressing this
problem head on is a huge mistake. Let us know the root cause (SOMETHING has changed in the Network/IP stack) and a solution to work around the cause.
I'll conclude like this: I KNOW that some Wifi issues can be resolved with firmware updates to WiFi routers/APs. I KNOW that some WiFi issues can be resolved with driver updates or, in some cases, downgrades. I KNOW some Wifi issues can be resolved
by uninstalling Intel ProSET, or getting manufacturer direct drivers. I KNOW some issues can be resolved by turning off Windows' ability to turn off the adapter when "not in use" to save power. I KNOW some owner's of Windows 8/8.1
machines have downgraded to Windows 7 or XP or abandoned Microsoft altogether and move to Linux or Mac. The ONLY common problem across all of these solutions, is Windows 8/8.1. Therein MUST lie the ultimate answer.
DLovitt

I hope to start a meaningful dialogue with Microsoft about the WiFi issues that Windows 8 and 8.1 have.
I've been deploying Windows 8 and 8.1 since the Surface Pro was released. Since then we've deployed about 50-75 Surface Pro, Surface Pro 2, Dell Latitude 7000 series, Lenovo Yoga 13 IdeaPad and Lenovo Yoga Thinkpad devices. Some have Windows
8 pro, some have been upgraded to 8.1 Pro, and some were purchased with native 8.1 Pro builds on them. All of these devices have difficulty with wireless in one form or another. We were able to reduce some of the problems (not eliminate) on our
corporate LAN over the last year by turning off Windows' ability to turn off the wireless adapter to save power, or turning off some of the offload or chimney or other advanced capabilities of the adapters. Problems were still present, but less so.
Many of our users were able to be on the wired LAN, so the issues were somewhat glossed over.
We were finally able to fix our Wireless LAN issue (we believe everything is working as expected after 2 weeks of testing and observation) by updating the controller and AP firmware for our Aruba wireless infrastructure (we have one controller and 11 ap's
across 5 well connected sites). This is great- sort of...
The problem is that while it's now very obvious that in our case, updating the firmware on our corporate WiFi is able to get the various 8 and 8.1 devices working on our LAN, this is not a true fix as it does not address our mobile and wireless capabilities
while:
1. traveling
2. working at a partner's or customer's location and connecting to their WiFi
3. Working from Home
4. Etc.
We obviously can't update everyone's AP/wireless router firmware. The solution, by necessity, must reside on the Windows 8/8.1 machine and it's inability to reliably connect and stay connected to existing Wifi networks. I want
to know the current state and thinking that Microsoft has regarding this persistent issue (searching for "Windows 8.1 wifi" in the "Windows 8.1 IT pro" forums on TechNet returned 4000+ results). Ignoring or not addressing this problem head on is a huge
mistake. Let us know the root cause (SOMETHING has changed in the Network/IP stack) and a solution to work around the cause.
I'll conclude like this: I KNOW that some Wifi issues can be resolved with firmware updates to WiFi routers/APs. I KNOW that some WiFi issues can be resolved with driver updates or, in some cases, downgrades. I KNOW some Wifi issues can be resolved
by uninstalling Intel ProSET, or getting manufacturer direct drivers. I KNOW some issues can be resolved by turning off Windows' ability to turn off the adapter when "not in use" to save power. I KNOW some owner's of Windows 8/8.1 machines
have downgraded to Windows 7 or XP or abandoned Microsoft altogether and move to Linux or Mac. The ONLY common problem across all of these solutions, is Windows 8/8.1. Therein MUST lie the ultimate answer.
DLovitt
THIS.
I have been going through the same efforts as DLovitt with no joy. I have ruled out all variables which leads directly to something with Win 8/8.1 being the problem. Very frustrating that I cannot find a fix anywhere.
Subscribing to this thread in the hopes an answer is forthcoming.

My macbook pro is connected to wifi but it will not connect to the internet.

My macbook pro is connected to wifi but it will not connect to the internet. When I go on safari, it says that "Safari can't verify the identity of the website". Then I tried to update flashplayer but you need the internet to update it. All this only started happening after that Moutain Lion software was downloaded onto the laptop. Please help, I have been internet-less for a couple months now.

Hi rynhelp,
If you are not able to connect to the internet after installing Mountain Lion, see this article for information on how to start troubleshooting:
OS X Mountain Lion: Use Network Diagnostics
http://support.apple.com/kb/PH10984
You may find additional troubleshooting information in this article useful:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
It is written for Lion but works for Mountain Lion as well.
Cheers,
- Ari

Problem waking MacBook Pro when connected to external display

I have the new 13" MacBook Pro and like to use it connected to an external VGA display (Xerox) with the MacBook Pro in closed clamshell mode. The problem I am having is that after working for a a few hours, when I put the Mac to sleep with mains power connected, usb keyboard connected and the external display connected (via mini display to VGA adapter), the Mac will sometimes refuse to wake. I have a wireless Mighty Mouse also and the Mac is set to wake with Bluetooth devices. When I click a key on the keyboard or click the mouse a few times the pulsing sleep light at the front of the Mac goes solid but nothing appears on the external display. If I open the MacBook Pro the solid light goes out but the Mac does not respond. If I close the MacBook Pro display, the solid light comes on again. I have no option but to force a restart. This is an intermittent problem. I have yet to have this happen when no external display is connected.

I have the exact same problem.
Here's my story:
To give you some backgroud, my setup involves having the macbook on a mstand hooked up to an external monitor. I run a usb hub from my macbook, this is where my mouse transceiver is plugged in. I use am Apple wireless bluetooth keyboard (latest slim model)
I recently purchased the 13.3' inch 2.26 MBP as I gave my older 2.0 uMB to a family member. The computer is in the stock configuration with no hardware upgrades.
I have noticed weird behaviour when waking the computer from sleep when the lid is closed. When i wake the computer up (by tuning on bt keyboard), the keyboard light blinks like there is not bt connection and the computer will wake in an inactive state. The led light will be on, but when i flip the screen up....nothing. Screen is dark, keyboard pressing does not illicit any responses. I have to do a hard reboot by holding down the power button to restart the computer. Unfortunately any previous data or work is lost.
I work in IT so I completed troubleshooting and also things outlined on forums in google. Reset PRAM, reset SMC and also reinstalled OSX. Still I get the same result. Fearing I purchased a defective unit, I called Apple and they told me i could exchange the computer so I dropped by the apple store and exchanged it quite easily.
I've spent hours restoring from time machine and I am experiencing the same issue on my new laptop. I'm now assuming its not hardware but more firmware related as I had to do a bluetooth firmaware upgrade when I bought the computer when I checked for software updates.
Is anyone else having any wake issues with their new MBPs? And what should I do next? Should I exchange for a 3rd unit? Thanks for you help everyone.

Variables and Actions in Adobe Acrobat Connect Pro

Hello Gurus,
I have been searching different forums around the net for three days, so I am really frustrated since I cant find anything related to this, and I am even thinking if this is really possible.
I'll try to explain what I wanted to make. I am using Captivate 4 and publishing my content through Adobe Acrobat Connect Pro server. I want to use this "Variables and Actions" Feature of my current version of Captivate. Now, I want that when my user open a training which she is enrolled with, I want her name to appear on the content, like "Hello Irish" something like that, without requiring her to log on her name. How could I make use this variables and actions in captivate 4 to get automatically the "first-name" variable of my user in Adobe Acrobat Connect Pro of my user?
Is this possible guys?
Thanks.
Troy

Hi,
I am looking at Connect Pro right now, and as I can see it on its default page it displays the name and lastname of the logged user, moreover, there is a part where you could either invite existing user, or create existing user, as mentioned in this link: http://help.adobe.com/en_US/AcrobatConnectPro/7.5/Using/WS5C856274-D671-4665-9CD0-29868C89 60F2.html so I am thinking If maybe there could be a way where I can retrieve the "first-name"of the user through Variables and Actions of Captivate. Since I am trying to avoid prompting the user to type in their first names, I wish to do automatically, that is if it possible.
Thanks.
Troy

Help! Problems when updating content on Connect Pro site

Hiya,
I've been updating web links in existing training packages on our connect pro site but when I got to re-publish and update the existing content, I have issues.
Each time I re-publish, different things happen. I either get slide audio but no visual or I get visual with no audio or I get nothing but the Adobe Presenter loading symbol! It's driving me crazy... does anyone know what I'm doing wrong or how to fix the problem? Any suggestions would be welcome.
Thanks
Specifics:
Adobe Presenter version 7.0.5
PowerPoint 2010
Windows XP
Adobe Connect Pro 7 (I think!)

well, there you have it – a classical if then loop.
seems i'm still stuck somewhere in the middle of the amavisd.conf nightmare. had amavisd-new 2.4.5 / spamassassin 3.1.8 up and running after a real nightmare (which had to do with daemonize=1).
after i tried to get up-to-date with amavisd-new 2.5.1 and spamassassin 3.2.1 i saw the same problems (see below) again, while launchd tried to get amavisd started.
Jun 15 05:14:11 mail launchd: org.amavis.amavisd: exited with exit code: 2
Jun 15 05:14:11 mail launchd: org.amavis.amavisd: respawning too quickly! throttling
Jun 15 05:14:11 mail launchd: org.amavis.amavisd: 9 more failures without living at least 60 seconds will cause job removal
Jun 15 05:14:11 mail launchd: org.amavis.amavisd: will restart in 10 seconds
remembering the previous troubles, i double checked all things, which could be set wrong (daemonize, etc.) and all was well. tried a second install and all to no success.
later i had the idea, it might be the new amavisd.conf, which troubles (why ever) the startup. so i used the v2.4.5 one and lo and behold, it worked. but why? what is so strange/new/different in 2.5.1, that the startup of amavisd gets broken?
now i read, that they changed a bunch of stuff and i certainly would be using the newer versions conf file, but it seems i don't get it right configured. i'm on the latest updated 10.4.9 server with all fixes installed. every service is working, mail gets in/out and gets even tagged.
well, i didn't do the setup with the 2 users junkmail/nojunkmail yet. is it really necessary to set them up as local users? can't they be handled as every other user which has mail enabled via wgm?
anyone can help me here? thx.
Various Mac OS X (10.4.9) Mac OS X Server (10.4.9)

Adobe Connect Pro to Captivate

I recorded a presentation with PowerPoint slides in Adobe Connect Pro. Now I need to edit the slides in the recording. Can I import the recording into Captivate to do some editing? If so, please give me some instructions. Thanks.

From what I can recall I don't think that you can edit Recordings created in Adobe Connect Pro using the FMR editor in Adobe Captivate.
Best regards,
Mark

8500a all in one, and macbook pro wirelessly connected. Broken pipe ????

i have an all in one 8500a and a mac pro wirelessly connected. It has been fine for 7 months. Now I am getting a message that says broken pipe, what do I do? I have no idea what a pipe is.

Hi,
Try resetting the Printing System, then reconfigure the device:
*Be aware that resetting the printer system will remove any existing print queue and reset any customized driver settings.
Click the Apple menu, and then click System Preferences .
Select Print & Fax.
Right-click (or Ctrl + click) your product in the Printers list in the left panel, and then click Reset printing system .
Click OK to confirm the reset.
Type your user Name and Password .
Click OK . The printing system resets.
Now reconfigure the device by following the HP Setup Assistant, located under Applications > Hewlett Packard > Device Utilities.
Now check if the problem been sorted.
If the issue remains with no change, completely remove any installed HP Software by using Scrubber:
**Please be aware that performing the next steps will remove any installed HP Software.
1. Click on Go menu (Click the desktop, then look at the menu in the bar at the top of the page)
2. Select Applications
3. Select the Hewlett-Packard folder
4. Double-click HP Uninstaller application
5. Follow the uninstallation till prompted to select a device to uninstall
6. Press and hold Control + Alt + Cmd keys on the keyboard simultaneously while you click on Uninstall
7. approve any prompt to uninstall any HP Software.
Repair the Mac OS Disc Permissions:
1. Open the the Applications folder.
2. Go to the Utilities folder.
3. Double-click on Disk Utility.
4. Select the hard drive containing the boot volume.
5. Go to the First Aid tab and select Repair Disk Permissions.
Note: This process may take several minutes depending on the Mac and amount of permissions that need to be repaired. The Progress Log will indicate when the proccess has been completed.
Download and install the latest software below:
Mac OS X v10.5 (Leopard) or v10.6 (Snow Leopard):
http://ftp.hp.com/pub/softlib/software11/COL34340/mp-85024-2/OJ_AIO_08_8500_A910_Net_Full_Mac_WW_74....
Mac OS X v10.7 (Lion):
http://ftp.hp.com/pub/softlib/software12/COL40169/bi-97933-2/HP_Lion_Ink_SW_v12-1.13.22.dmg
Finally make sure to install any available HP by clicking the Apple icon and then Software Update.
Please let us know of any further issue,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Failed to Install Connect Pro Add-in

I cannot get the Adobe Connect Pro Add-in to install on my
laptop. I am running Windows Vista, IE 7 and Adobe Flash 9. I have
disabled pop blockers & added admin.acrobat.com to my list of
trusted sites.
Has anyone encountered an issue with installing the plug-ing?
If so, how did you resolve it.
I apologize if this question was asked and answered in this
forum, but I was unable to find it.
Thank you for any help.
-Kelly

Hi Matt an thanks for the email the other day.
The main issue here is this is happening across all versions of Breeze and Connect.
This isn't a problem due new browsers or operating systems.
This is a problem abobe and Macromedia created when they didn't add the right code to their program.
It's a glitch that needs to be fixed for ALL versions of this software because it's rendered it useless, by mistakes in programming.
It's not a matter of lifetime support, the problem is the developers made a mistake.
And now they have released a patch for certain versions and decided not to release them for 4.1
It would take an adobe connect developer about 5 minutes to patch this problem just like they did with 5.1.
When the Macromedia Sales Person convinced me into making the decision to purchase breeze 4.1 for my client they ASSURED me it would work with all future browsers with the flash player installed.
There is no security issue here to discuss.
The company spent around 78,000 dollars for Breeze 4.1 with all the features including custom pods, personal branding/customization and scorn compatibility.
I assure you WEBEX, CISCO or Illuminate would have fixed this a year ago..
No one in my breeze data base can download the presenter.
I have even downloaded it manually but breeze still doesn't recognize it so that means no live presentations..
This problem all started with the release of a new version of the flash player.
No other event caused this problem.
I'm not trying to sound disrespectful but am developer myself and there are just some things that you have to fix when the developer is the one who created the problem.
Markfi

Connect Pro Meeting Users Groups Participants question

I have Connect Pro Meeting. Here is what I want to do: invite and register only certain people for certain webinars. I offer teacher training webinars so they are a different group of people for each webinar. I am the only person in my "company" so I am the only one registered for now. How do I set up a list of participants I want to invite for each webinar? I'm very confused about how Adobe works in regards to doing this. So far I've been merely setting it up so I have to accept each person who comes in, but I'd like for them to be able to come in on their own (without it being public for anyone who gets the URL to go into). The same is true of recorded webinars. I want to let those who have paid for the webinar view them, but I don't know how to set it so they can see them. Can anyone direct me to somewhere that gives this information? I feel like I'm running in circles trying to find answers in Adobe's help files.

You can manually enter your users into the server. Go to the Administration tab and click Users and Groups. Here, you can create registered users. When you create a new Connect meeting, make sure you choose to only allow registered users. When a users clicks the link. They will be prompted for to log in before entering the room. Only users that you added to that room will be allowed in. You can also upload a list of users (in a CSV) file if you have a lot of users to create.
Once users are added to your server, you can put them into groups (i.e. Doctors, Nurses, Admins) to make it easier to invite participants. You can add the Doctors group to a meeting and anyone in that group will be allowed in.
If you have any questions a good place to look is the Help files. For example, when you are in the Users and Groups section, click the help link in the upper right corner to see the help files for Users and Groups.

ActionScript version for Connect Pro 7?

What AS version does Connect Pro 7 support? I am looking to
write a pod with a library that is written with Flex/AS3. If not,
what future version of Connect will support AS3?
Thanks!

probably not. but you can download flash 9 alpha (or maybe
it's beta by now) for free. search google for a link.

Connect Pro X Connect Now

Similar Messages

Maybe you are looking for