Connect Target DB in Data Quality

Hi,
Sorry, My English not good. Please understand.
I using Data Quality for Data Intergrator.
There is Source DB and the problem of connection.
But, The connection to Target DB and I do not know.
How connect to Target DB?
Only the files only connection?
Even appreciate a little advice.
Thanks
Seo.
Message was edited by:
Seo

Similar Messages

DATA QUALITY connection on INGRES

Post Author: ryefrancis
CA Forum: Data Quality and Data Insight
Hi,
Would like to ask if any you guys have any idea on the error prompt "NO COLUMNS SHOULD BE RETRIEVED FOR THIS TABLE. A POSSIBLE REASON IS THAT YOU DO NOT HAVE SELECT PERMISSION FOR THIS TABLE OR DATABASE"?
The database being used is INGRES. We already tried to update its
security settings and Grant Access still it won't establish a
connection.
But when we try using SQL statements instead of SQL HELPER we could get some reports.
Hope you could have any suggestions and solutions to this problem.
Good Day!!!

Ingres is not supported for Data Insight however if you will send some additional information we may be able to check if anything obvious is missing.
Two items that may help are the connection information from the Data Insight repository (iqi_connection table) for this source and screen shots of the populated connection dialogs.

Data Quality - Failed to create connection to MDR.

Hi All,
I have installed Data Quality 11.7.2 on windows 2003 server using SQL 2005 (Both SQL 2005 server and Data Quality are in the same server) , The install was successful. But when I try to Open 'Data Quality Project Architect' it throws an error
Failed to create connection to MDR.
Driver error messgage = qodbc_mssql:
Unable to connect, Database error message =] [microsoft][odbc sql server driver]
[ tcp/ip sockets] sql server does not exist or access denied
I checked the ODBC connection and tested it successfully too.
I am not able to pass through the 'Meta Data Repository Connection' as its failing in 'Setup SQL connection option'
Any help is appreciated !!!
Thanks
Ranjit Krishnan

Hi Paul,
Thanks for you reply, OBDC connection was created under System DSN, also tired the users DSN option too, but did not work.
Recreated the ODBC connection many times still no luck.
The 'Project Architect' client and the MDR (SQL 2005 Server) are on the same machine.
Thanks
Ranjit Krishnan

ODI Data Quality metabase Load connections

Hi Guys
I am trying to get started with ODI data quality and profiling. I would like to connect from the ODI metabase manager load connections to the database on my local machine using the following
username: thiza
Password:
url:10.12.12.12:1521:EDW
The problem is ODI metabase manager requirs tns name. I tried to put the following string on the tns but still not working
EDW=(DESCRIPTION =(ADDRESS = (PROTOCOL = TCP)(HOST = tvictor-za)(PORT = 1521))(CONNECT_DATA =(SERVER = DEDICATED)(SERVICE_NAME = EDW)))
Can anyone give step by step on how to connect to oracle database from ODI metabase manager(load connections)
any help will be highyl appreciated.
Thanks
Umapada
I tried to put the following string on the tns but still not working
only "EDW" in place of TNS Name in metabase administrator. But when testing the connection at the time of creating entity, it is saying "Please wait, Validating Connection" but this wait never ends and continues for hour.
Edited by: user10612738 on Mar 2, 2009 10:54 PM
Seems following shared library is missing. Dont know how to get it from Oracle?
Has anybody found this problem earlier.
2009-03-03 12:12:15 02837 WARNING CONNECT Remote oracle connection failure, couldn't load file "/ora/ora10g/odi101350/oracledq/metabase_server/metabase/lib/pkgOracleAdapter/pkgOracleAdapter.sl": no such file or directory - couldn't load file "/ora/ora10g/odi101350/oracledq/metabase_server/metabase/lib/pkgOracleAdapter/pkgOracleAdapter.sl": no such file or directory
2009-03-03 12:12:15 02837 WARNING ADAPTER Authentication failed. - couldn't load file "/ora/ora10g/odi101350/oracledq/metabase_server/metabase/lib/pkgOracleAdapter/pkgOracleAdapter.sl": no such file or directory
2009-03-03 12:12:15 02837 INFO CLIENT_DISCONNECT interpffffec50
2009-03-03 12:12:15 02837 INFO METABASE removing session directory ->/ora/ora10g/odi101350/oracledq/metabase_data/tmp/session/3fb551e8-4c99-4be3-860d-5953ef6512fe<-
2009-03-03 12:12:25 27177 INFO CLIENT_DISCONNECT interp0029c060

If you are trying to connect to an oracle box. Try to do this. Worked for me.
Go to add loader connections.
And instead of pasting the entire string. Try to use only the name of the TNS.
In your case this would be EDW.
Once added save your metabase connections and go into the data quality and profiling part.
Type in the name of the metabase u recently created, along with the user name and password.
It should log you on. Worked for me. I have tried a lot of oracle connections. But the only problem for me is that i have never been able to configure a ODBC loader connections with SQL server.
Hope this helps.
Chapanna

Error When Creating Entities From Loader Connection In Oracle Data Quality

I want to create a Loader Connection to an external data source.
I Logged on the Metabase Manager and created a new loader connection with type as 'Oracle'.
In the parameters it asked for a TNS Name.I gave the TNS of the external data source to which i want to connect from 'tnsnames.ora' file.
After that I logged on to ODQ and tried creating an Entity using create entity wizard but ODQ cannot connect to the data source using the above created Loader Connection.
It shows below failure message:
Authentication failed. couldn't load library "C:/OraHome_1/oracledq/metabase_server/lib/pkgOracleAdapter/pkgOracleAdapter.dll": could not find specified procedure
I had my ODQ metabase and ODQ GUI running on Windows.
Hope i am clear.if i am making mistake in above steps please let me know.
Waiting for reply.

Refer to SR 2-5703204

Excel SSAS Tabular error: An error occurred during an attempt to establish a connection to the external data source

Hello there,
I have an Excel report I created which works perfectly fine on my dev environment, but fails on my test environment when I try to do a data refresh.
The key difference between both dev and test environments is that in dev, everything is installed in one server:
SharePoint 2013
SQL 2012: Database Instance, SSAS Instance, SSRS for SharePoint, SSAS POWERPIVOT instance (Powerpivot for SharePoint).
In my test and production environments, the architecture is different:
SQL DB Servers in High Availability (irrelevant for this report since it is connecting to the tabular model, just FYI)
SQL SSAS Tabular server (contains a tabular model that processes data from the SQL DBs).
2x SharePoint Application Servers (we installed both SSRS and PowerPivot for SharePoint on these servers)
2x SharePoint FrontEnd Servers (contain the SSRS and PowerPivot add-ins).
Now in dev, test and production, I can run PowerPivot reports that have been created in SharePoint without any issues. Those reports can access the SSAS Tabular model without any issues, and perform data refresh and OLAP functions (slicing, dicing, etc).
The problem is with Excel reports (i.e. .xlsx files) uploaded to SharePoint. While I can open them, I am having a hard time performing a data refresh. The error I get is:
"An error occurred during an attempt to establish a connection to the external data source [...]"
I ran SQL Profiler on my SSAS Server where the Tabular instance is and I noticed that every time I try to perform a data refresh, I get the following entries:
Every time I try to perform a data refresh, two entries under the user name ANONYMOUS LOGON.
Since things work without any issues on my single-server dev environment, I tried running SQL Server Profiler there as well to see what I get.
As you can see from the above, in the dev environment the query runs without any issues and the user name logged is in fact my username from the dev environment domain. I also have a separated user for the test domain, and another for the production domain.
Now upon some preliminary investigation I believe this has something to do with the data connection settings in Excel and the usage (or no usage) of secure store. This is what I can vouch for so far:
Library containing reports is configured as trusted in SharePoint Central Admin.
Library containing data connections is configured as trusted in SharePoint Central Admin.
The Data Provider referenced in the Excel report (MSOLAP.5) is configured as trusted in SharePoint Central Admin.
In the Excel report, the Excel Services authentication settings is set as "use authenticated user's account". This wortks fine in the DEV environment.
Concerning SecureStore, PowerPivot Configurator has configured it the PowerPivotUnnattendedAccount application ID in all the environments. There is
NO configuration of an Application ID for Excel Services in any of the environments (Dev, test or production). Altough I reckon this is where the solution lies, I am not 100% sure as to why it fails in test and prod. But as I read what I am
writing, I reckon this is because of the authentication "hops" through servers. Am I right in my assumption?
Could someone please advise what am I doing wrong in this case? If it is the fact that I am missing an Secure Store entry for Excel Services, I am wondering if someone could advise me on how to set ip up? My confusion is around the "Target Application
Type" setting.
Thank you for your time.
Regards,
P.

Hi Rameshwar,
PowerPivot workbooks contain embedded data connections. To support workbook interaction through slicers and filters, Excel Services must be configured to allow external data access through embedded connection information. External data access is required
for retrieving PowerPivot data that is loaded on PowerPivot servers in the farm. Please refer to the steps below to solve this issue:
In Central Administration, in Application Management, click Manage service applications.
Click Excel Services Application.
Click Trusted File Location.
Click http:// or the location you want to configure.
In External Data, in Allow External Data, click Trusted data connection libraries and embedded.
Click OK.
For more information, please see:
Create a trusted location for PowerPivot sites in Central Administration:
http://msdn.microsoft.com/en-us/library/ee637428.aspx
Another reason is Excel Services returns this error when you query PowerPivot data in an Excel workbook that is published to SharePoint, and the SharePoint environment does not have a PowerPivot for SharePoint server, or the SQL Server Analysis
Services (PowerPivot) service is stopped. Please check this document:
http://technet.microsoft.com/en-us/library/ff487858(v=sql.110).aspx
Finally, here is a good article regarding how to troubleshoot PowerPivot data refresh for your reference. Please see:
Troubleshooting PowerPivot Data Refresh:
http://social.technet.microsoft.com/wiki/contents/articles/3870.troubleshooting-powerpivot-data-refresh.aspx
Hope this helps.
Elvis Long
TechNet Community Support

Data Integrator and Data Quality

Hi,
I worked on BI 7.0 and now exploring Business objects. I wanted to know how Data Integrator and Data Quality products relate to SAP BI 7. What is the purpose of using them. Is this integration and quality features not embedded in SAP BI 7.

BI and Data Services share many integration features, but Data Service provides better connectivity to third party data sources. The data quality features of Data Services are not available in BI.

Question on CKM and Data Quality

As I understand, CKM only supports the check based on db constraints. If I want to have more complicated business logic built to the checking, does Data Quality sound like a good choice. Or other suggestions?
In my case, I will need to check the data in the source table based on the table data from different sources (both target and source tables). This should be doable through data quality, correct? I am new to ODI. When I first installed the ODI, I didn't choose to install data quality module. I suppose I can install DQ separately and link it back to ODI? Do they share the same master repository?
Sorry for the naive questions, you help is greatly appreciated.
-Wei

Hi,
My idea is just like:
for instance a FK validation:
create function F$_validate_FK (value1 number) return number
as
v_return number;
begin
select my_fk into v_return from any_table where column_fk = value1 ;
return v_return ;
exception
When NO_DATA_FOUND then
return -1;
end;
And at constraint you will have:
-1 = (select F$_validate(table1.column_to_be_validated) from dual)
Any record that have -1 as return will be not valide for the flow.
The F$ function can be created in a ODI procedure before the interface and dropped at end if you think to be necessary.
Make any sense?
(Maybe there are several syntax error in this example, I just write it and did not compilate, just to show the idea)
Edited by: Cezar Santos on 28/04/2009 10:20

Data Services and Data Quality Recommnded Install process

Hi Experts,
I have a few questions. We have some groups that have requested Data Quality be implemented along with another request for Data Services to be implemented. I've seen the requested for Data Services to be installed on the desktop, but from what I've read, it appears to be best to install this on the server side to allow for more of a central benefit to all.
My questions are:
1. Can Data Services (Server) install X.1 3.2 be installed on the same server as X.I 3.1 SP3 Enterprise?
2. Is the Data Services (CLIENT) Version dependent on if the Data Services (Server) install is completed? Basically can the u201CData Services Designeru201D be used without the Server install?
3. Do we require a new License key for this or can I use the Enterprise Server license key?
4. At this time we are not using this to move data in and out of SAP, just using this to read data that is coming from SAP.
From what I read, DATA Services comes with the SAP BusinessObjects Data Integrator or SAP BusinessObjects Data Quality Management solutions. Right now it's seems we dont have a need for the SAP Connection supplement, but definetly something we would implement in the near future. What would be the recommended architecture? A new Server with tomcat and cmc (seperate from our current BOBJ Enterprise servers)? or can DataServices be installed on the same?
Thank you,
Teresa

Hi Teresa.
Hope you are referring to BOE 3.1 (Business Objects Enterprise) and BODS (Business Objects Data Services) installation on the same server machine.
Am not an expert on BODS installation.
But this is my observation :
We had recently tested on a test machine BOE BOXI 3.1 SP3 (full build) installation before upgrade of our BOE system.
We also have BODS in our environment.
Which we also wanted to check whether we could keep on the same server.
So on this test machine, which already has BOXI 3.1 SP3 build, when i installed BODS server installation,
what we observed was that,
all the menus of BOE went away
and only menus of BODS were seen.
May be BODS installation overwrites/ or uninstalls BOE, if it already exists ?
I dont know. Though i could not fine any documentation, saying that we cannot have BODS and BOE on the same server machine. But this is what we observed.
So we have kept BODS and BOE on 2 different machines running independently and we do not see any problem.
Cheers
indu

Terminated with error: br REP-501: Unable to connect to the specified data

Dear All,
Oracle DB 10g installed on Windows 2003 Server machine and client is Windows 7 Pro. Forms are running fine. If I run report by puting everything in URL it is also giving result. But only when i am trying to call report via form I get an error REP-501: Unable to connect to the specified data. The report log file contains below result. Is this something to to AUTHID=ANONYMOUS??? I need your assistance in this regard as I have been facing this problem since quite a long time now.
[2011/10/22 3:55:55:34] Info 56013 (ConnectionManager:release): Connection 0 is released
[2011/10/22 3:55:55:34] Info 50132 (JobObject:reset): jobid = 72 Get command line: REPORT=E:\AuditSys\twoconsecutive_estimate.jsp USERID=AUDITSYS@customerdb P_USERID="MAJAN" P_REPORTNAME="Bills which have been estimated for 3 months consecutively" P_REGIONCODE="" P_TARIFF="" P_PRIGOV="" P_AREAFROM="2" P_AREATO="91" P_BILLMONTH="9" P_BILLYEAR="2011" P_MONTHS="3" BATCH=YES DESTYPE=cache DESFORMAT=HTML AUTHID=ANONYMOUS
[2011/10/22 3:55:55:34] Debug 50103 (ConnectionImpl:runJob): Job queue for jobid = 72 is 0
[2011/10/22 3:55:55:34] Debug 50103 (ConnectionImpl:runJob): jobid = 72 is in current queue
[2011/10/22 3:55:55:34] Debug 50103 (ConnectionImpl:runJob): Calling findDuplicatedJob for jobid = 72
[2011/10/22 3:55:55:34] Debug 50103 (JobManager:findDuplicatedJob): Found no duplicated job for job 72
[2011/10/22 3:55:55:34] Debug 50103 (ConnectionImpl:runJob): No Duplicate jobs for jobid = 72
[2011/10/22 3:55:55:34] Debug 50103 (ConnectionImpl:runJob): Job 72 is Enqueued
[2011/10/22 3:55:55:34] Debug 50103 (JobManager:firstToRun): job 72 is first to run
[2011/10/22 3:55:55:34] Debug 50103 (JobManager.runJobLocal): Trying to get engine for Job 72
[2011/10/22 3:55:55:34] Debug 50103 (EngineManager:getIdleEngine): Target max engines = 1
[2011/10/22 3:55:55:34] Debug 50103 (EngineManager:getIdleEngine): rwEng-0 is used = true
[2011/10/22 3:55:55:34] Debug 50103 (EngineManager:getIdleEngine): rwEng-0 state is 1
[2011/10/22 3:55:55:34] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Reserved
[2011/10/22 3:55:55:34] Debug 50103 (JobManager.runJobLocal): Job 72 got Engine rwEng-0
[2011/10/22 3:55:55:34] Debug 50103 (JobManager:runJobInEngine): Job 72 calling setCommand on engine rwEng-0
[2011/10/22 3:55:55:34] Debug 50103 (EngineManager:updateEngineState): Engine rwEng-0 status is 3
[2011/10/22 3:55:55:34] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Running
[2011/10/22 3:55:55:34] Debug 50103 (EngineManager:updateEngineState): Engine rwEng-0 status is 5
[2011/10/22 3:55:55:34] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Idle
[2011/10/22 3:55:55:34] Debug 50103 (JobManager:runJobInEngine): Send job 72 to engine rwEng-0
[2011/10/22 3:55:55:34] Debug 50103 (EngineManager:updateEngineState): Engine rwEng-0 status is 3
[2011/10/22 3:55:55:34] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Running
[2011/10/22 3:55:55:96] State 56016 (JobManager:updateJobStatus): Job 72 status is: Terminated with error:
REP-501: Unable to connect to the specified database.
[2011/10/22 3:55:55:96] Debug 50103 (JobManager:notifyWaitingJobs): Master job 72 notify its duplicated jobs.
[2011/10/22 3:55:55:96] Debug 50103 (JobManager:updateJobStatus): Finished updating job: 72
[2011/10/22 3:55:55:96] Debug 50103 (EngineManager:updateEngineState): Engine rwEng-0 status is 1
[2011/10/22 3:55:55:96] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Ready
[2011/10/22 3:55:55:96] Exception 501 (): Unable to connect to the specified database.
Thanks,
Zia

Dear guys, it is quite an urgency here and I am not getting any clue from anywhere else .... please give me some tips to handle the issue if anybody has some...
Regards,

Oracle Data Quality: how to load fixed file

Hello to all,
I need to load several fixed files in Oracle Data Quality.
As far as I understand from the documentation, I think I need to use a "Cobol" Loader Connection, so I created one and put all my files under the "Data directory".
I don't know what I need to put under "Schema directory".
Then I tried to create an entity from my Cobol Connection, and no entity is listed.
I have also some problems with the docs, because the pages about Cobol Copybook/Fixed connection, etc. seems missing from the documentation I find around.
I followed the tutorial and I think this is a really interesting product, and I need to test it on fixed file as soon as possible.
Thank you,
Andrea

Hi Andrea,
In your Cobol Loader, you need to define the cobol file extensions (eg. cbl) under data extensions field. Then restart the ODQ GUI and the entities should appear.
The documentation bugs you face will be ironed out in the next release.
Do tell me if this helps

How to install Data Quality Client on Windows when the Servers are on AIX

I have installed ODI, ODI DP and DQ Servers on an AIX machine. However, Oracle Data Quality Client is an Windows only component. How do i install it? When I use the software of ODI, for Windows platform,I get the following error when i try to connect.
An unexpected error has occurred. Please refer this information to Trillium Software support.
Description: invalid command name "::com::avellino::metabase::authenticate"
File: ..\include\ExecutionContextHandler.h
Line: 326
Stack:
invalid command name "::com::avellino::metabase::authenticate"
while executing
"::com::avellino::metabase::authenticate madmin 303f4450-8ce1-436f-9a16-54fae4d8a4cf ::com::trilliumsoftware::tssauto::pwd_answer"
invoked from within
"remote0 read"

Hi,
We are hitting same issue (Metabase Manager from windows) to ODQ server on Solaris and event viewer in windows server showing exactly same message .
Any luck or pointer ?
Atul Kumar
http://onlineAppsDBA.com

DATA QUALITY MANAGEMENT software

Hi,
some one please help me to find DATA QUALITY MANAGEMENT software for our company purpose. I am not able to locate in SAP portal.
Thanks & Regards
Kishore Varanasi

No,
i am looking for DQM, which will connects to SAP B1 servers.
Thanks
Kishore Varanasi

The Data Quality Services license validation has failed.

Hello
Am Harsha here, Am getting some strange error on my MSSQL Server 2012 DataQualityServices, I have installed DQSinstaller and everything is working properly till yesterday, But today after i restart the Machine am not able to open DQS client its giving some
strange error like "The Data Quality Services license validation has failed." Please see the Screen shot below. Please let me know how to rectify this Issue.

After patching, the dqsinstaller.exe should be run to regenerate the SQL CLR procedures to refresh the version. Try this...
Launch Cmd as Administrator
cd "C:\Program Files\Microsoft SQL Server\MSSQL11.InstanceName\MSSQL\Binn"
DQSInstaller.exe -upgradedlls
Thanks, Jason
Didn't get enough help here? Submit a case with the Microsoft Customer Support team for deeper investigation - http://support.microsoft.com/select/default.aspx?target=assistance

Installing data quality management for sap for multiple sap system

Hello folks,
I have an Requirement where i need to install data quality management for sap in multiple sap system.
I have installed it successfully for one system .
here my data services is installed in one server with rfc server as windows services in same server.
i have done the required configuration in ecc side.
my question is how do i use same data services jobs which are configured as real time services for both my sap connection?
in simple terms how do i installed dqm for multiple sap system having single data services server.
thanks,
Shubhangi.

Hi Vishal,
Regarding DQM Please refer the below Link.
Links:
http://scn.sap.com/community/data-services/blog/2013/07/18/i-installed-dqm-for-sap-you-can-too
or you can also refer below SNotes given by SAP:
1732816 - How to manually import DQM ATL files correctly after failed install
Note 1732816 - DQM Adapter Dataflow installer fails on Data Services 4.1
Links:
https://service.sap.com/sap/support/notes/1732816
Thanks,
Daya

Connect Target DB in Data Quality

Similar Messages

Maybe you are looking for