Connect to A printer Wirelessly without Airport Base?

Is there anyway to connect to my epson printer that is now connected with a usb to my G4 desktop without having to get an airport base? My desktop doesn't have wireless but it is connected to my DSL router directly.
Powerbook G4 12inch Mac OS X (10.4.8)

Ok so once I do that, I go to print from my laptop and it says that there is a communication error. Do I have to change any settings on my laptop in order for it to know to connect to the printer through the network instead of it being plugged in?

Similar Messages

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not. I've tried several USB connectors, and several different ports on my USB hub; same result. I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.

Hi,
I am currently replying to this as it shows in the iChat Community.
I have asked the Hosts to move it to Snow Leopard (you should not lose contact with it through any email links you get)
I also don't do Wirelss printing so I can't actaully help either.
10:01 PM Friday; July 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Is it possible to print wirelessly (WITHOUT A WI FI INTERNET CONNECTION) .Using my ipad 3 to an HP air printer.

Is it possible to print wirelessly (WITHOUT A WI FI INTERNET CONNECTION) using my ipad3 and a HP air printer ?.

Christina,
The purpose of the AirPrint system was to permit printing directly from iDevices to printers that are AirPrint enabled without going through an intermediary device. The catch is the printer must be an AirPrint enabled printer. The iPad's apps will then recognize the printer and print seamlessly. Follow the link Demo gave you to see the specifics from HP since that is the printer you asked about using.

Can I set a 2nd Gen. iMac to work wirelessly without Airport?

I have a older G4 tower that has Airport on it, but my ancient 2nd Generation iMac does not have Airport on it, and obviously will not connect to the internet. Is it possible to run the older iMac wirelessly without Airport? Is there anything I can add to the iMac externally instead of having to open it up and add hardware?
I'm not that computer savvy, so the most basic straight forward method would be most helpful.
Thanx!

You could use an Ethernet wireless adapter. Examples of Ethernet wireless adapters are the Linksys WET11, Linksys WET54G, and the Buffalo Technology WLI-TX4-G54HP bridge.

I am trying to set up using my printer wirelessly through airport. I have a macbook and my husband can print wirelessly from his Macbook Pro but I can't. What do I have to do to set mine up? The printer is an Epson R2400

I am trying to set up using my printer wirelessly through airport. I have a macbook and my husband can print wirelessly from his Macbook Pro but I can't. What do I have to do to set mine up? The printer is an Epson R2400

Is there a cd that came with the printer?
If so, put in the cd and that will help you set it up.
If not, I think macs come with a program that helps you set up printers.
Also make sure that the printer is connected to the same network.
Make sure the printer is on.

Printing wirelessly via Airport Express w/ Win XP

Using Airport Express for internet connection and to print wirelessly. Had no problem setting up and connecting with my MacBook, iBook and Win XP computer. Installed Bonjour for Windows and set up printer, was able to print test page. However, every time I print something that is more than a few lines, my Win computer (only) loses network connection. Gains back connection fairly quickly but will not continue to print where left off.
When I installed the Bonjour for Windows, I remember reading something about unblocking certain ports if running firewall. I think that might be the problem but I am unable to find that information again.
Help?

Support Article regarding Bonjour and XP with firewall...
http://docs.info.apple.com/article.html?artnum=301514

I cant connect to my printer wirelessly

Hello,
I cant connect to my printer wirelessly, it doesn't show up on my devices list my printer is a hp 5520e and my laptop is a hp g61, thanks.

Hi,
Please download and run the following software:
http://ftp.hp.com/pub/softlib/software12/COL42577/mp-108807-2/PS5520_1315.exe
Still does not work, download and run the following tool:
http://ftp.hp.com/pub/softlib/software12/COL50849/mp-129932-1/HPPSdr.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I am having trouble printing I have a connection to my printer wirelessly but does not print out the correct page I want.When I do print I get a bunch of pages more than is needed and also get a code and symbols please help I am jammed at work

I am having trouble printing I have a connection to my printer wirelessly but does not print out the correct page I want.When I do print I get a bunch of pages more than is needed and also get a code and symbols please help I am jammed at work

This can be the result of selecting the wrong driver. An older, unsupported laser printer will sometimes work with the generic Postscript driver.

Connect to Internet Without Airport Base Station or Other Wireless Router

I have an iMac G5 w/Airport Extreme card, an eMac w/Airport card (not Extreme), and an iBook w/Airport card (not extreme). The iMac is connected to the internet via DSL (direct Ethernet connection - no router). I can succesfully network all three computers for file sharing but can not connect to the internet over the network using the eMac or the iBook. Is it even possible to use the iMac as a wireless base station for the other two computers or do I have to buy a wireless router or Airport Base Station?
Thanks.
iMac G5 Mac OS X (10.4.5) eMac 10.3.9, iBook 10.3.9

no1bass, Welcome to the discussion area!
The best solution is to get an inexpensive wireless base station.
However, you can use the iMac to share the Internet connection. Go to the iMac's Sharing preference pane and enable Internet Sharing. If you have the iMac's firewall enabled, you will need to also enable Web Sharing or otherwise configure the firewall to open the correct ports.

TS3274 can not connect printer..error msg can not find airport printer printer wireless to airport extreme

printer not recognised. Printer wirelessly connected to airport extreme. iPad will not find printer

Thank you so much Paul_31 for your suggestions, HUGELY appreciate the effort
I have reset the printing system, a few times for good measure but nadda.
I have also looked at getting the software from the Apple site after seeing that with Snow Leopard you should let the operating system lead the install not the manufacteurers software as it is most likely out of date. I too found it wasn't there so I uninstalled the software got up the CLX_3300 series stuff then went from there with the USB cable. It apparently hasn't worked either
Unfortunately now after using the print utility to scan for a while that has now gone again on the last restart of the Mac. I am so completely clueless
The box says the printer is compatible, the place of purchase said it was compatible, the Samsung site says it is compatible.
I think it's the set up of my Mac? Our maybe a glitch in the network settings?
Thanks again

Printing wirelessly using airport extreme base station

I recently set up a wireless network at my house using an airport extreme base station. I plugged my usb printer into the base station and, according to the manual, I can print wirelessly. However, when I go to print, after following the manual instructions, it just times out. Any ideas?

There is already a thread (or two) on the PSC 1410:
Some people have had success here:
http://discussions.apple.com/thread.jspa?messageID=5987003&#5987003

Printing issue when using Intel Macs to print wirelessly via Airport

We seem to have a problem. It has come to light since using Intel based Macs running 10.4.7 and Airport to connect wirelessly to the internet and to print to a Acculaser C1900N with intel printer driver installed. When setting up by Bonjour and then printing to the printer it fails and an exclamation mark appears on the printer icon in the Dock. Appletalk is enabled for the port, just in case you ask.
Browsing the internet works fine, but the printing side fails every time.
When we insert a Ethernet cable everything works fine.
As far as I can see its not a System Software problem related to old macs running 10.4.7, but to new Intel macs running 10.4.7. I have tried this on a Intel Mac Mini and also an Intel MacBook the results are the same.
Please has anyone got a solution as we start a new term with these new macs in about two days and printing is a integral part of school life.

I have just configured a new Airport Extreme and I have just printed sucessfully to our printer. Weird its just a Graphite Airport base Station Issue. I am not sure if the problem occours with the Snow Airport Base Station....Ill have to try that one out. I am so happy that it works you wouldnt believe it.

Printing wirelessly with Airport Express to HP psc1350 suddenly stopped

I have an imac G5 running OS X 10.3.9. I am wirelessly connected to a router (D-Link 624) to run the internet and am also wirelessly connected to an airport express to print to my HP psc 1350. I set all this up myself and it was running without any problems. However, I decided that it was probably best to add some level of security to my internet connection so added WPA security into the mix. I had to reset the airport express and connect it back up to the network (which took me a little time to work out, but I managed to do it!) and then I tested the printer and it worked perfectly. A couple of days later I needed to print something so turned the printer on again and nothing. I kept getting an error about printer connection failing. So I thought, I'll unistall the HP software and reinstall it from the CD. Nope - the CD refused to install. So, I went to the hp page and found what I thought was the right software, and installed it and that seemed to install but not help the matter. I can see the printer under Rendezvous, but it says "driver not installed". Plugging the printer directly into the imac works fine so the driver must be installed. What I can't understand is that it all worked fine before, and even after I changed the security settings so surely that can't be the problem. But how do I get it back?

I had no choice but to run through the HP installer from the CD - there was no option to install the driver separately. I uninstalled the downloaded software that I had installed thinking it would fix it! The CD is old (well, at least 2 years old) so I don't think there is any chance the software on the installer could be too new. I had previously set up the printer to print wirelessly and it worked like a dream. I am positive that I did not go to that much trouble when I originally installed it - I would have given up! So it seems strange when I go through what I presume I did before that it won't work now. I thought macs were supposed to be easy - I guess it is if it is plug & play, but once something goes wrong it is hard to find what the problem is - especially for non-technical people like me!
Mac OS X (10.3.9)

Cannot print wirelessly via AirPort Express with WPA2 Personal security

Recently decided to tighten security by switching to WPA2 Personal from WEP on our WDS wired/wireless home network. Main base station is Airport Extreme, WDS remote base station is an Airport Exress, both configured using Airport Setup Assistant. Printers are hardwired through the switch. No problem printing wirelessly when in range of the main base station, but when connected through the WDS remote base station, get the following error: "Unable to open [printername]: No route to host". Interestingly, if I first print when connected (wirelessly) through the main base station, I can then print wirelessly through the remote base station. When I go back to WEP security there is no problem. Anyone have any suggestions?

You may need to update your AirPort base station firmware to support WPA/WPA2 over WDS. (ref: http://docs.info.apple.com/article.html?artnum=107791)

I can no longer print wirelessly without switching on Wireless setting on printer

My network is a Mac running OSX 10.5, HP Deskjet 3050 connected by USB to the Mac and a Dell laptop running Windows Vista. Previously the PC printed wirelessly but that stopped suddenly. I uninstalled the HP drivers on both computers, downloaded and installed the newest versions for both then ran the HP printer wizard.
Yes, I can print from both computers but I'd like to get it back the way it was without one more device in my house generating or demanding microwaves.

So you want to go from a wirelessly networked printer to a print sharing across different operating systems? Why? It will just stop working again. It is a very unreliable way to print.
There are not significantly more or fewer microwaves in your system with the printer connected wirelessly. If you are really worried about that you should shut down your wireless router, which is the source of the transmissions, and buy a wired router and string Ethernet cables throughout your home.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Connect to A printer Wirelessly without Airport Base?

Similar Messages

Maybe you are looking for