Connect To Home Mac Desktop From Work
Does anyone know how I can connect to my iMac G5 at home from work by using either ARD or some type of FTP software?
Hi Mathew
Your question is a bit too broad to get an answer. It's a bit like asking "Does anyone know how I can write a document using Word?" How can anyone answer such a question? "Yes, buy it and use it" ?
To try and be helpful I will say that I connect to and control my MacMini at home from my iMac at work using ARD. It is not the cheapest way to do it. If all you want to do is see the screen and contol it, via mouse and keyboard, there are other VNC programs available for free. ARD has a lot more management tools as it is aimed at people running installations like school computer labs where one computer controls dozens of others. I have had a lot of trouble getting these more advanced features to work outside the LAN, which is why I'm searching the list today. I have had very poor experience with transfering files over the Internet with ARD. Sometimes it has worked, mostly not.
Which brings me to the second point. You mention "ARD or some type of FTP software". ARD and FTP are very different tools, although I guess ARD uses the FTP protocol. ARD lets you see and control a remote computer. FTP is for sending files. If you just want to send files I wholeheartedly recommend Transmit
Similar Messages
-
I am trying to connect my old mac desktop and my mac book pro to my new mac desktop to use as monitor but it will not work??
Hi ashleydanc588,
If you are interested in more information on using an iMac in Target Display Mode, including what machines are compatible, you may find the following article helpful:
Target Display Mode: Frequently Asked Questions (FAQ)
http://support.apple.com/kb/ht3924
Regards,
- Brenden -
Problems printing to printers connected to a MAC pro from a Windows Laptop
Folks,
I got a MAC PRO a couple of weeks ago and I have two USB printers (an EPSON CX 4200 and a CANON S900 connected to it).
I tried both Ifelix's procedures to add the printers connected to the MAC and I had problems with both procedures.
If I try the http://mac-ip:631/printers/printer-name I am successful in adding the printer to the Laptop running windows XP however when I try to send something to that printer the job goes straight to the "completed" queue on the MAC and nothing prints at all. I used the respective windows drivers for each printer on the XP Laptop.
I spent two hours with Apple support on the phone and they could not figure out what was going on and suggested that I post my issue to this forum to see if anybody has any ideas.
I also tried to configure the printers using Bonjour (as per Ifelix's documented method) but at some point during the printer setup I get an error message indicating that I do not have "sufficient access" to install the printer driver even though I am logged in as admin on the windows XP computer.
Has abybody experienced similar pain? Is anybody here being able to print to printers connected to a MAC PRO from a Windows XP laptop?
I should also say that my computers are in a network and both are connected to a Linksys Wireless Access point/router.
The Laptop is a wireless laptop and the mac pro is conneced to the linksys router via a regular network cable.
Also, I have no issues printing straight from the mac to both printers.
Would appreciate any suggestions/comments.
Thanks in advance for your time.
regards,
marceloWhat risks does that imply?
Well, it implies that the battery is not user serviceable, which it is not. However, your warranty has already been effectively voided by the spill. So, you don't have that much to lose. As I already said though, there are risks inherent in cleaning any electronic equipment with any sort of liquid. The safer route is definitely to take the machine in for repair, as eww says.
And for the Q-tips, when I opened the machine, it seemed really complicated to unmount or access parts with Q-tips.
Unfortunately, it is complicated. It's not something to undertake unless you are comfortable with it. And it can never be guaranteed that it will actually be clean because there are many spaces that you'll never be able to clean. I should perhaps emphasize that I would only clean the machine myself if there was no chance of being able to pay for repairs. It is sort of a last-ditch option to attempt to avoid the cost of repairs. Nothing is guaranteed though and you may have to pay for repairs anyway.
Wouldn't it be better to just let it bath in the distilled water, wait a few minutes and then let it dry?
Definitely not. If you do that you can forget about the machine ever working again, at all.
do you think there is hope that once cleaned, everything would work again ?
It is doubtful. Like I said, if paying for repairs are not an option, then you should consider at least attempting to clean it. Otherwise, you should have the top case replaced (new keyboard and trackpad).
--Travis -
How do access my disc drive on my Mac desktop from my MacBook Air?
I know I can access my Mac desktop from my MacBook Air, I just can't find the instructions. Can anyone help?
On your iMac desktop, Go to System Preferences > Sharing and check DVD drives.
The go to the MBair and click on Remote Disc in Finder's sidebar, select it and then the iMac. -
Somehow, I created 2 Appe ID's...1 from home and 1 from work. I purchased additional space on iCloud with one ID, but I need to transfer it to the other.
Having read some other posts I think I have answered my question. If I was somehow able to terminate my old (unwanted) account and Apple ID I would no longer be able to access the material I bought with that ID- so I'm stuck. I have to learn how to manage that situation.
This is unfortunate for Apple consumers. Life is complicated for families these days and this "rule" although it is in place to prevent cheating and fraud makes things unnnecessarily difficult for me and my family as in my niaevity (sic) with the online world I bumbled into this situation. Not everyone is out to rip off Apple - one of the worlds richest corporations- or the entertainers who market their work through iTunes.I would just like to be able to enjoy the entertainment I pay for where and when I like to on whichever computer is available to me. And I'm not terribly computer literate.
It would have been nice to have had the opportunity to speak just once to a real person in the employ of Apple to explain my situation to them. -
Hi, i was wondering how to share movies for example, to the mac desktop from the macbook pro?
Share them how? View them? Copy them?
What kind of movies? DVDs? iTunes? Other MPEG, AVI files, etc... -
How do I switch Travel Time in Mac Calendar from work to home?
I recently installed Mavericks and have been using the new Travel Time feature in Calendar. Today I ran into a problem, however. I scheduled an appointment and put in the location address. When I went to enter the travel time, it only gave me two options: walking from work and driving from work. There was no option for driving or walking from home. This has never been a problem before. What's going on here?
From Calendar Help:
Choose to see travel time from your starting location to the event’s location.
To set your starting location, Calendar first looks for your location in any events that are up to three hours before this event. If Calendar doesn’t find a location, it uses your work address during work hours and your home address during other hours. (Your work hours are set in Calendar preferences using the “Day starts at” and “Day ends at” menus.) If your card in Contacts doesn’t have your addresses, Calendar uses your computer’s current location.
Also:
https://discussions.apple.com/message/23549295#23549295
https://discussions.apple.com/message/23521087#23521087 -
Connection Errors to Remote Desktop from OSX after Domain name change
We have an issue using Microsoft Remote Desktop from Macs in our school. All was well until we changed the domain name of our RDS servers and installed a new wildcard certificate. Connections work perfectly in Windows 7/8 and also iOS on iPads, but we cannot
get any Macs to connect having tried OSX 10.7 and 10.9. The error message says the connection failed to load but seems to add a spurious end to the connection string - TS/en-US/Default.aspx - but we cannot trace where this is being picked up.
We can get to the site in a web browser and sign in to receive the "browser not supported" message in Safari so traffic is obviously getting to the severs.
Has anyone else had a similar issue? We have spent days poking around with DNS etc but can't seem to make any progress here.Hi Jeremy,
I have tried removing connections and also re-installing the App. We have been using this App since January with no real issues until we made our domain name change - I really don't understand why it works fine in Windows and iOS but not OSX. We are doing
nothing different to what we have done from day 1.
Log file from our old connection when it was working looked like this:
[2014-Mar-24 10:41:43] RDP (0): Final rdp configuration used: redirectcomports=1
server port=3389
use multimon=1
redirectdrives=1
promptcredentialonce=1
authentication level=0
full address=rdsfarm.xxxxxxx.internal
session bpp=16
prompt for credentials on client=1
redirectprinters=1
drivestoredirect=*
alternate shell=||OpenMind
gatewayusagemethod=2
alternate full address=rdsfarm.xxxxxx.internal
workspace id=rdsgw.xxxxxxx.internal
allow font smoothing=1
redirectposdevices=0
audiocapturemode=1
gatewaycredentialssource=0
remoteapplicationname=OpenMind 2.0
devicestoredirect=*
remoteapplicationmode=1
remoteapplicationprogram=||OpenMind
enablecredsspsupport=1
redirectsmartcards=1
redirectclipboard=1
span monitors=1
gatewayprofileusagemethod=1
gatewayhostname=rds.xxxxxxx.sch.uk
remoteapplicationcmdline=
The log file looks very different now, all I am getting is:
[2014-Jun-17 10:26:41] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Jun-17 10:26:41] RDP (0): lo0 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Jun-17 10:26:41] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Jun-17 10:26:41] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Jun-17 10:26:41] RDP (0): gif0 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): stf0 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): en0 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): en1 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): en1 af=30 (AF_INET6) addr=fe80::21f:5bff:feb8:3f72%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Jun-17 10:26:41] RDP (0): en1 af=2 (AF_INET) addr=192.168.0.65 netmask=255.255.255.0
[2014-Jun-17 10:26:41] RDP (0): fw0 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): --- END INTERFACE LIST ---
[2014-Jun-17 10:26:41] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jun-17 10:26:41] RDP (0): client version: 8.0.24875
[2014-Jun-17 10:26:41] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Jun-17 10:26:41] RDP (0): correlation id: 9f18df13-7c84-dc4b-a780-e6b77a280000
[2014-Jun-17 10:26:41] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Jun-17 10:26:41] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Jun-17 11:44:15] RDP (0): *** Application terminated ***
[2014-Jun-18 09:51:37] RDP (0): *** Application terminated ***
[2014-Jun-19 12:00:19] RDP (0): *** Application terminated ***
[2014-Jun-19 12:15:32] RDP (0): *** Application terminated ***
[2014-Jun-19 12:16:21] RDP (0): *** Application terminated *** -
Can access mail on home IMAP server from work, but not at home
At home I have an Xserve running Snow Leopard Server with IMAP service enabled. This runs all my personal email. Even Gmail and iCloud accounts have their incoming mail forwarded to that server, because I prefer to house my own data. I have dynamic DNS with an MX record. The Xserve also runs DNS and resolves "imap.myip.net" to the internal IP address of the Xserve, and, when I am and work, "imap.myip.net," through the dynamic DNS service, resolves to the outside IP address I have through my ISP. My router forwards external requests on Port 993 to the Xserve internally.
Until recently, I could move my MacBook Pro between home and work and access my email without problems in either place. It appears that since the 10.8.2 update, I can no longer access my email from home, where I am on the same subnet as my IMAP server. When at home, Mail accesses external email servers (Gmail and my work account) without problems. For the accounts on my home IMAP server, the Mail Connection Doctor states that the IMAP server could not be contacted.
However, I can clearly ping it from my MacBook Pro, which means that it is reachable and that my internal DNS is working.
I just fired up my work VPN, and, sure enough, messages that Mail hadn't been able to collect are trondling into my Inbox. In other words, when making Mail access my mail server through the Internet there is no problem.
Even before the Mountain Lion update I found that I had to relaunch Mail when I returned home from work, or Mail couldn't connect to the mail server. It seemed like Mail cached the resolved IP address it had gotten at work, which is the external IP address of my home network, and failed to re-resolved the address of the IMAP server once I woke up the computer, after getting back home. Quitting Mail and relaunching it did resolve that, but it was annoying.
I have never worked with Little Snitch, but it might provide some answers as to what Mail is attempting to do, when it is failing to access the server. Do any of you agree or recognize this issue and have a solution?It looks like a simple reboot fixed the problem.
Mac OS X is, by and large, so stable that I don't even consider rebooting as a troubleshooting step. There have been a number of application glitch that required a quit and re-launch to fix them, but that didn't do the trick with Mail. Very possibly reconfiguring everything from scratch had something to do with the fix, but in a way that required it to be combined with a reboot. -
How to connect my home Mac at distance
Please, can someone tell me how process to make a connection between my home Mac et my Macbook pro when I am outside home?
Thank you for the answersStart with TeamViewer.com (free for personal use) - this is one of the easier ways to connect from a remote location.
Another approach is setups a Virtual Private Network (VPN) using Hamachi from LogMeIn.com (again there is a free for personal use option).
While I have not tried it, I think you can use Apple's iCloud to connect a Mac OS X Lion laptop to a Mac OS X Lion home system.
There are more complex setup option available involving port forwarding specific ports on your home router <https://PortForward.com>. -
My Ipad Mini will no longer connect to the wifi at work. It did when I first got it but now it just displays unable to connect. What gives? I work at a hospital and the wifi is not password protected and my mini connects fine at home. Please help!
Some of these won't apply to your situation.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Hey! So basically, I've been using my Wifi connection (from home) lately, I had no troubles what-so-ever. I turned on my 3G network this morning, and again, everything's going perfectly fine with my connection. I came home around half 4 from school and decided to turn on my Wifi connection at home, what I've realised is that whenever I try turning on my Wifi network, the little sign that's usually at the top doesn't appear anymore. I tried resetting the network settings and closing and opening my phone, but.. This didn't really make any difference. I'm really worried and I don't know what to do! I have tried reconnecting to my Wifi but nothing happened, my Bluetooth's never really turned on. Please help!!
I'm not sure if I'm understanding but if I am then I'm not sure why you are turning your Wi-Fi off and on. It should automatically connect and use your Wi-Fi when it is available and use your cellular data connection when Wi-Fi is not available. I haven't turned either off ever. However, more to the point of your current problem, the following has some troubleshooting steps that may help: http://support.apple.com/kb/TS1398
-
Can I install Creative Cloud on my laptop at home, my desktop at work and iPad at home?
Can I install Creative Cloud on my laptop, windows, at home, my desktop, windows, at work and my iPad, Apple, at home?
You can install it max on Two machine.
For more information on Creative Cloud please refer following FAQ list:
http://www.adobe.com/in/products/creativecloud/faq.html
You can find answer to your question under "Getting Started" section. -
It took Mac phone two days, four sessions, and three hours of wasted time to figure out that Webroot security program what's stopping my dictation program from working. Only after it was disabled and removed from my Mac did the dictation program works again. All Apple user should be aware of this problem with Webroot.
Wasting your time is all such programs are capable of accomplishing. Some will also waste your money.
-
How can i get safari to sync reading list from my home mac and my work pc?
im using windows 7 on my pc at work and snow leopard on my mac pro at home. can i do this?
nevermind. silly me.
Maybe you are looking for
-
Slow motion / fast motion in Premiere Elements 13
I read that in Premiere Elements 13 fast motion (and I think also slow motion) ist removed. Is that correct. And if yes: Is there any workaround available?
-
ITunes playing repeating same song, wont play thru list
I have restored the phone, can't figure out why it will only repeat a song. Started doing this out of the blue. Even does it if I enable shuffle. Stumped
-
My cd-rom is working correctly
What external CD-Rom works best with an iMac G4 OS 10.3.11?
-
This might sound ridiculous but here it goes: I accidentally hit a couple keys on my netbook keyboard. This made a toolbar pop up on the left side of the window. It's vertical and has a search field at the top, then listed underneath are my bookmark
-
Syncing selective Albums through iCloud Photo Library?
Hello, I would like to know whether there is a way to sync selective Albums through iCloud Photo Library? For example, I want album A and B to show on my iPhone but want to see all albums on my Mac. Is this possible?