Connected but Time Capsule HD & Printer Gone

Hello Everybody,
I setup a Time Capsule in my office that employees could start going wireless on our laptops. For the most part, the WIFI works great; however, the HD and printer sometimes disappear and then reappear several hours later without me adjusting any settings. During this time, everybody is still connected via WIFI. Everybody's MacBooks the most up to date and so is my Time Capsule so I don't know what the problem is. Can anybody help?
Thanks,
TL

make sure TC firmware is 7.3.1 and Airport Utility is 5.3.1 and also check for any type of interference from other devices and TC location to other routers or devices.

Similar Messages

Why does my printer connected through time capsule only print once after powering on then never again?

Hey,
I have a TimeCapsule which is logging in to my wireless network (i.e. it's not extending it, neither is it serving its own network). I have a Brother HL-2030 connected to it (via USB). I have two issues:
* the printer will only print directly after plugging in the USB cable to the TC, but only once. Subsequent attempts to print would not succeed. Disconnecting and reconnecting the USB cable will help, again, only once. The printer works flawlessly when directly connected to my MBP.
* the TimeCapsule is not found by AirPort utility, and neither am I able to apply a software update to it. Configuring it to extend my WLAN does not work reliably.
Does anyone have an idea what might be wrong here?
Regards,
Matthias

Thanks for the hint. I had thought about that, too. It was the easiest to configure the network this way as the modem is provider pre-configured. But I need to see if I can get to bridged mode. There's an additional problem with the location of the device in the building...
The printer had worked through the TC when it was the router (with my previous provider) and served the WLAN. Thus I don't see where the difference should be, particularly as I believe the printer is served via IP and thus it should IMHO not matter if the TC serves the WLAN + device or only the device.

Wireless printing from windows XP on HP1025 connected to time capsule

I have a new BUSINESS DEL laptop that I want to print from on my HOME Apple network.
My printer, HP1025nw, is directly network connected to the time capsule. Printing from iMac and MacBook is working OK, however I can not seems to get the DELL ( running XP ) to print.
Network setup on the DELL is OK, I'm connected wireless, can access internet, etc... no prolem there.
Any suggestions?

Load bonjour for windows..
Apple network resources are hidden from the PC.. without bonjour.. once you load that it should help.
If you still have issues.. how is the printer connected.. USB is the big issue one.
But if the printer is simply plugged into ethernet or wireless connected then the apple network is irrelevant. Just follow the HP instructions for installation of network printers.

Time capsule 2TB,connected to mac mini server leopard, LG DP1W mediacenter/player for watching movies on my tv from my harddisk tower connected to time capsule by usb/hub on G-technologie 8 TB G-SPEED Q RAID-oplossing(hard disk tower) is this gonna work??

hello,
ik have a question about the hardware i wanna buy
i have a IMAC that is 3 years old and running on leopard snow 10.5, i want to upgrade the software from this mac to 10.6 and put 4GB workmemory into it, i have now 1GB.
I have ordered a MAC MINI SERVER leopard snow 10.6(also ordered a dvd superdrive, wireless typing, and a wireless mouse for the mac mini)
i have ordered a Time Capsule 2TB
i want to connect to the Time capsule this:
G-technologie 8 TB G-SPEED Q RAID-oplossing (hdtower)
UPC of EAN nr.: 705487185744 in the mac store
i want to connect to the Time Capsule this for my TV to play movies from the harddisktower connected to my time capsule:
LG DP1W MEDIAPLAYER/CENTER without harddisk build into it, with WiFi connection butt, i'm gonna use te 2.0 USB connection that is faster and stabile.
-Connecting the Time Capsule to the Internet
i'm also gonna use this: gear4 PG467 UNITY REMOTE(control everything with iphone)
i'm also want to connect by 2.0 USB my canon all in one foto printer, WiFi is not working properly and i have many times problems with connection my printer wireless.....
And for the future i also want to connect a Dymo Labelprinter by 2.0 USB
in total 7 usb connections: only the time capsule have one port, so i can split to more ports by a usb-hub????
Well i have another question: i want to store a movie database on the external harddisktower that is connected to the time capsule.....
How can... let me say: my sister, and father who live on 2 different adresses get access to the movie database and watch them at their own home?????
can i secure it with a password given to my sister or father that is only works for 1 file???? so that i get multiple passwords
how does this works??? to share/upload/download to the internet only to one person????
i hope someone can help me????

hello,
ik have a question about the hardware i wanna buy
i have a IMAC that is 3 years old and running on leopard snow 10.5, i want to upgrade the software from this mac to 10.6 and put 4GB workmemory into it, i have now 1GB.
I have ordered a MAC MINI SERVER leopard snow 10.6(also ordered a dvd superdrive, wireless typing, and a wireless mouse for the mac mini)
i have ordered a Time Capsule 2TB
i want to connect to the Time capsule this:
G-technologie 8 TB G-SPEED Q RAID-oplossing (hdtower)
UPC of EAN nr.: 705487185744 in the mac store
i want to connect to the Time Capsule this for my TV to play movies from the harddisktower connected to my time capsule:
LG DP1W MEDIAPLAYER/CENTER without harddisk build into it, with WiFi connection butt, i'm gonna use te 2.0 USB connection that is faster and stabile.
-Connecting the Time Capsule to the Internet
i'm also gonna use this: gear4 PG467 UNITY REMOTE(control everything with iphone)
i'm also want to connect by 2.0 USB my canon all in one foto printer, WiFi is not working properly and i have many times problems with connection my printer wireless.....
And for the future i also want to connect a Dymo Labelprinter by 2.0 USB
in total 7 usb connections: only the time capsule have one port, so i can split to more ports by a usb-hub????
Well i have another question: i want to store a movie database on the external harddisktower that is connected to the time capsule.....
How can... let me say: my sister, and father who live on 2 different adresses get access to the movie database and watch them at their own home?????
can i secure it with a password given to my sister or father that is only works for 1 file???? so that i get multiple passwords
how does this works??? to share/upload/download to the internet only to one person????
i hope someone can help me????

I just had Uverse installed. The iMac which was my base station is now connected via my household electric ground connection. Another computer is now the base station. I have connected my Time Capsule to my computer by USB cable, but can't set it up

I just had Uverse installed. My iMac desktop has been the base station for my wi fi, but we had to connect it via ground wire of my electrical system and use another desktop as the base station [with windows op system]. We have connected my Time Capsule to the computer via USB cable. I believe that will require setting up the Capsule to use Ethernet, but the instructiions on the install disc only talk about using Airport. How can I find instructions for setting up using USB cable and Ethernet?
Thanks!
Charles Leach

All the manuals are listed at the head of the thread.
https://discussions.apple.com/community/wireless/time_capsule?view=overview
The TC cannot connect to the computer by USB.. it is network device.. it only connects by ethernet or wireless.. usb is for external drive or printer.

Trying to connect Airport time capsule to my leopard iOS mac. Downloaded software for time capsule for snow leapard/leopard but still says I need more software. What do I need?

Trying to connect Airport time capsule to my leopard iOS mac. Downloaded software for time capsule for snow leapard/leopard but still says I need more software. What do I need? I have a 10.5.7 iOS (Leopard). It connects to wifi at speeds in the airport and has plenty of storage capacity and memory.

If your Time Capsule looks like this..
Please review the System Requirements to set up and administer the device.....
Setup and Administration
iPhone, iPad, or iPod touch with iOS 6 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and Airport Utility 6.3 or higher
http://www.apple.com/airport-time-capsule/specs

I am connected to time capsule via wi-fi but air port says not connected and disk utility does not see it

I am connected to time capsule via wi-fi but air port says not connected and disk utility does not see it. I had it connected via ethernet and it still did not see it. Then i disconncectd it from ethernet and did the Wi-fi connection and am able to post this message but air port still does not see it.

Disk Utility will not "see" the Time Capsule, so no need to waste any more time on that issue.
but air port still does not see it.
Not sure what you mean by "air port" here.

How do i connect my time capsule from outside my home? i dont have static ip

sorry about my english...
its been 4 months now and still I am not able to connect my time capsule via internet from outside . i have read enough forums and discussion but i am confused because every discussion has different answer. please anyone can explain me the simplest way to configure my time capsule so i can connect it from other computers. i am using windows 7 64bit os.i am not advance user of networking so please explain me in detail.
some questions.
1. is it possible to use time capsule as nas using dynamic ip address?
2. if yes how and where can i get exact detail about this.
3. how to connect my time capsule form my iphone,ipad or other computers . connect through ip address or something else?
4. is it any simple installation way to do this? i heard about bonjour and icloud but dont know how to connect through this.
please help me
thank you
sachin

i am using windows 7 64bit os.i am not advance user of networking so please explain me in detail.
Here is your primary issue.. you cannot connect with win7 ..
Windows only offers SMB protocol which just about every ISP.. all responsible ones ...block..
Time Capule offers AFP to internet and only AFP.
You need to use a Mac to connect.. then use BTMM and iCloud as there is no dyndns in the TC anyway. (Actually there is a dyndns but only for apple btmm use... you cannot access.
If you want to or have to use windows.. then get a proper vpn router that offers vpn endpoints to windows and has dyndns.. setup the TC in bridge behind the vpn router and access via vpn .. this is the only safe way of connecting using SMB.

How do I connect my Time Capsule on my modem wirelessly?

I already have a modem that I use to access the internet wirelessly on my macbook. Is there a way that I can connect my Time Capsule on this modem without having to use an enthernet cable?
Thanks!

So you are saying that if I use the AirPort Extreme Base Station I would be able to connect my TC wirelessly and expend my wireless signal at home?
No, please see my previous answer.....
and then use it to expand the internet signal.
That is not possible. The Time Capsule could "extend" the signal only if it is provided by another Apple router.
What I did say was.....
When the Time Capsule "joins" a wireless network, it simply connects to the network...like another computer. If you configure the Time Capsule this way, it becomes a wireless hard drive. it performs no routing functions and it will need to be located where it can receive a strong wireless signal from your main wireless router.
I am not recommending that you set up the Time Capsule this way, but will provide the steps if you want.
So, to clarify....
The Time Capsule can be configured to "join" your existing wireless network. It will not extend or expand the wireless network. The Time Capsule becomes a wireless hard drive in this type of configuration.
I do not recommend this type fo setup for most users because it is difficult to configure and limits backups to wireless only. You will not be able to connect to the Time Capsule using Ethernet to backup, which is much faster than wireless.

I don't have a DSL or cable modem to access the Internet ... just a mobile WiFi (there is no cable available at our house). How do I connect my Time Capsule to the Internet via the mobile WiFi?

I don't have a DSL or cable modem to access the Internet ... just a mobile WiFi (there is no cable available at our house and the mobile WiFi is our only option). How do I connect my Time Capsule to the Internet via the mobile WiFi?

LOL!!
I am in Australia and the ISP... I think both the main ones would fit your description to a T.. big T in particular.
Your router is really unsuitable.. if it is only wireless and no ethernet.. just buy an ethernet one.
Do a search on ebay.. 3g router.
But you can get the TC to join a wireless network.
It is a non-standard setup that Apple will not support.. the option is hidden.
If you are on Lion download the 5.6 utility. Go to the wireless set up page and hold down the option key whilst selecting wireless mode.. a new option, join will appear. You can then put in the ssid and passkey of the 3g router.
But please note the end result of this setup..
very slow speed. The TC is now a second wireless hop from your clients.. this will halve the speed.
In this mode the ethernet are deactived.. for reasons only Apple know, they decided you should not use ethernet when doing this.

How to connect a Time Capsule to an existing Airport Extreme?

I have an Airport Extreme connected to my broadband internet modem. This Airport Extreme is also connected to my audio system to be used by iTunes.
Recently I brougth my Time Capsule from another location to be included in the Airport Extreme network. I want to continue using Time Machine on the Time Capsule, and iTunes on the Airport Extreme.
I could get this to work, by connecting the Time Capsule to my modem, and setting it up to extend an existing network (the Airport Extreme network). Airport Extreme and Time Capsule are situated next to each other. However, performance of Time Machine was horrible, far too slow. If I connect my MacBook to the Time Capsule by an ethernet cable, it does not work.
When I set up the Time Capsule to create another wireless network, performance of Time Machine is okay. I cannot use iTunes on the Airport Extreme in that case. I have to switch networks for that.
I'm sure it should be possible to have both an Airport Extreme and a Time Capsule in one network, use iTunes on the Extreme, and Time Machine on the Time Capsule. But I do not know how it should be arranged.
Can anyone solve this problem?
Greetings from Holland, Koen

+What surprises me is that with setting 1 (TC joining AX) the Time Capsule has an option to extend the range of the network being joined.+
Yes, but it will only "extend" if you have a newer version of the AirPort Express, the 802.11"n" version. If you have an older "b/g" version of the AirPort Express, you can set the Time Capsule to "extend", but it won't and you'll have problems.
+With setting 2 (AX joining TC) the Airport Express does not seem to have this option.+
This probably confirms that you have an older "b/g" version of the AirPort Express. It does not have the "extend" feature.
+Could it be this option (which I did not switch off in my earlier experiments) which gave me such terribly bad transfer rates to my Time Capsule harddisk?+
That's probably the reason since the older version of the AirPort Express cannot be configured to "extend".

I have a macbook pro and use BT homehub 3. can't work out how to connect my time capsule. can anyone help, thanks.

I have a macbook pro and use BT homehub 3. can't work out how to connect my time capsule. can anyone help? thanks

Just need to plug the TC in to the hub in bridge mode.. do not try and bridge the homehub.. it is not possible with the setup BT uses.
To bridge the TC.. plug it directly into a computer by ethernet.. no other connection to the TC or the computer.
Press and hold in reset until the front LED flashes rapidly.. about 10sec.
Release the reset.
Open the airport utility and setup the TC to bridge mode.
The actual method depends on version of the OS and airport utility you use.
This is version 5.
Sorry I cannot post the v6 as I am on a snow leopard computer now. But you go to the network tab, and choose off bridge mode for method of connection. It will be NAT and dhcp by default.
Then setup wireless.. you have a number of choices here.
Either setup with the same SSID Security and password, as the homehub uses.. or a different name, and password..
Each method works fine.. but you sometimes have issues with wireless channels.. for now leave it on auto and see what happens.. if you have issues lock down the radio channels on both devices.. use one out of the following on each, 1, 6, 11 or 13 in UK.. so say 6 on the homehub then 13 onthe TC.
Update the TC.. unplug fromt the computer and plug it into the homehub.
If you have other issues with the setup tell us what OS you run so we can post suitable screenshots.

Do I need a cable connecting my Time Capsule to Airport Express if I want to use the AE to extend my wifi network range?

I'm a bit confused by conflicting advice given by my local Apple shop and my internet provider.
My cable modem is plugged into a Time Capsule which I use to access the net wirelessly almost all over the house. The one spot the wireless doesn't quite reach is (of course) where I now need my office and iMac to be.
I thought I could just plug in an Airport Express somewhere in the middle to extend the network's range but the guy at my local Apple shop said the Airport Express would need to be connected not just to power but to the Time Capsule, via a cable. That's fiddly and would involve cables running under the floor or along walls and ceilings, not something I can or really want to do. It's not really practical to try and move the cable connection point either.
My internet provider suggested a netgear wireless extender and said that would only need to be plugged into power. The reviews of the netgear product I found comparing it to Airport Express suggest that the Express doesn't need to be connected to anything other than power either to extend a network range (which was what I originally thought).
So I'm wondering which advice is correct? I've also read that the netgear product isn't all that easy to set up so I'd rather stick with. Apple if it will do what I want.
Thanks for any help out there

I thought I could just plug in an Airport Express somewhere in the middle to extend the network's range but the guy at my local Apple shop said the Airport Express would need to be connected not just to power but to the Time Capsule, via a cable.
I'm sure that the guy at the Apple shop means well, but he is not correct.
While it would be preferable to connect the Time Capsule and AirPort Express using a wired Ethernet connection, the Express can connect wirelessly and extend the wireless signal the same way....IF...it is located where it can receive a good wireless signal.

How to connect a time capsule with an ATT Elevate Hot Spot

Hi,
Need help connecting my time capsule to my ATT Elevate Hot Spot....since I have no ethernet connection.
Thanks!

Not sure how much we can help on this, but as a test, if you turn off the wireless on your MacBook and connect it to the router using an Ethernet cable, you should be able to log onto the Internet.
If you can, you know the Ethernet connection is working, and it will be a simple matter to connect the Time Capsule to the router and get it set up.
If you cannot get an Internet connection when you connect the Mac directly to the router, then more troubleshooting will be required.

Can i connect my time capsule to my hdtv for use as an extra display for my mac book pro?

I want to use my hdtv as a display wirelessly. Can one connect their time capsule to the tv?

1. Can my TC handle "dual band" wifi or not? As it's 3 years old, I'm not sure the spec is sufficient.
They have been dual band since gen2.. yours is gen4 or at worst gen3.
2. Is the TC likely to provide better performance than the BT Home Hub router, as the Apple store suggest?
Impossible to say.. but easy to test.. simply plug the TC into the BT router in bridge mode and use it with setup to create a wireless network.. that is the way I would suggest anyway.
3. Will the BT wifi extender still work if the TC is the main router? BT aren't sure, hence asking here. "Trial and error" will take hours and because of the wifi issues in my house, can be frustrating.
Sorry this is out of my perview.. I can suggest it will be poor.. apple do not use standard settings for extend wireless.. and if it is universal repeater they also behave poorly.. Have you thought of using EOP adapters.. very popular in the UK and tend to work much better than wireless.
4. Would the BT wifi extender communciate with the TC or the BT Home Hub router?
As suggested above.. leave the BT as the main router and plug the TC bridged into it.. you can then use both..
simply set the wireless names different and keep the channels apart.
For 2.4ghz there are only 3 non-overlapping channels.. 1, 6, 11 or 13 as alternative in UK.
For 5ghz there are lots more but the lower channels work better.. so 36-48 depending on regs in the UK.

Connected but Time Capsule HD & Printer Gone

Similar Messages

Maybe you are looking for