Connected device is not detected on Finder

Hi guys. I am new Mac user. I have my portable photo card reader connected to my Mac, and trying to see it in Finder, but there is non. I can download pictures from it on Lightroom, but why I can not see it on Finder under Devices section? Thanks in advance for your help.

1. Remove "Audio device on High Definition Audio Bus"
2. Download from Microsoft the KB835221 hotfix and install it
3. Restart the system, and XP will automatically detect the devices
4. After this you can install realtek drivers
but for L30-134
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=22804

Similar Messages

My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable. When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back

My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable. When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back

I have had a 3GS for 2+ years. After upgrading to IOS 4 (now 4.3.5) I began having problems. In the past week, my screen went to the itunes logo and USB cable twice -- unprovoked -- just found it sitting there like that! I connected to itunes and it did restore from a backup but it is a major inconvenience. I am also searching for answers, but better back-up regularly!

My problem is that one of the USB ports and the device does not detect this and inactive but can not find how to reactivate.Help me please! greetings thanks!

Hello good evening, I have a MacBook Pro and my problem is that one of the USB ports and the device does not detect this and inactive but can not find how to reactivate.
Help me please! greetings thanks!

Do you have the Firefox new tab page but the actual sites are missing, or do you have some other page?
If you have some different page, try the quick fix in Fred McD's reply.
If the sites are missing, did you use the Reset feature? That will clear the storage associated with the new tab page. I'm not sure it's possible to recover from that; you probably need to rebuild your page from scratch as you browse.
For possible future reference, here is how to access the hidden setting for the page to display on new tabs:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste '''newtab''' and pause while the list is filtered
(3) Double-click the '''browser.newtab.url''' preference and enter your preferred page:
* ''Page thumbnails (default)'' => about:newtab
* ''Blank tab'' => about:blank
* ''Built-in Firefox home page'' => about:home
* ''Any other page'' => full URL to the page
Press Ctrl+t to open a new tab and verify that it worked. Fixed?
Some gotchas:
''If Firefox won't let you edit this setting:'' you may have something called SearchProtect on your system.
''If Firefox lets you save your change but ignores it:'' one of your extensions may be overriding it. You can review, disable, and/or remove extensions on the add-ons page:
"3-bar" menu button (or Tools menu) > Add-ons > ''in the left column click'' Extensions
''If the change works during your session, but at the next startup is back to an unwanted page:'' you might have a user.js file in your personal Firefox settings folder (your Firefox profile folder). This article describes how to track down and remove the file: [[How to fix preferences that won't save]].
Any luck?

TS4006 Device does not appear in Find My iPhone and I tried all the options on the support page. What next?

Device does not appear in Find My iPhone and I tried all the options on the support page. What next?

Is the device lost or stolen? If so it may be turned off, not connected to the internet, and/or have a dead battery in which case it may never appear.
The what next is then covered in:
If your iPhone, iPad, or iPod touch is lost or stolen
Reporting a lost or stolen Apple product

I updated my ipad2 to ios7 and now it won't allow me to download photos from my iphone..it says connected device is not supported (on the iphone)

I updated my ipad 2 and my iphones to ios7...now when I plug the adapted in to download my images from the iphone to the ipad..I get a message saying that the connected device is not supported...It worked before ios 7 what do I do?

Same problem here. I am trying to load photos from my iPhone 5 to my iPad 3. The iPad asks me to trust the iPhone, and the iPhone says "iPad: device not supported". I am using the camera connection kit w/ USB connector and my iPhone lightning adaptor. This worked before iOS 7.

Bluetooth device is not detected during installation of bluetooth driver

Hi , Initialy bluetooth was working properly, Few day ago I saw that there was no bluetooth icon in system trayas well as in list device manager. So I uninstalled the driver and try to install. But during installation it showthat bluetooth device in not detected and it exit.

Downloads the Windows 7 Hotkey Features. This will enable the wireless console with Fn+F5. Then you can enable bluetooth from there. Windows's built-in bluetooth drivers should work fine, maybe even with an update from WU if you're lucky.
-tm
Edit: Don't forget to download the System Interface Driver too.

IPad 2 to Apple TV: Cannot Play Movie - The Connected Device is not authorized to play protected movies.

I am getting the 'Connected Device is not authorized to play protected movies' message.
Here is my setup:
From the iPad 2 I used iTunes to Rent a movie - Safe House in SD.
I then used Airplay Mirroring to send the movie to my Apple TV.
The Apple TV is connected to a Vizio V0370M HDTV.
According to Vizio all of the HDMI ports have HDCP.
When the movie starts I get this error message on the iPad.
I have used this approach in the past with success.
I rented a couple of episodes of HBO's True Blood and they played just fine on the Vizio through Apple TV.
I believe some were in HD and some SD.
Using the iPad with Airplay Mirroring is a very nice way to send content to the HDTV.
I was hoping I'd be able to do this for anything that is on the iPad.
Is there something wrong with my configuration? Or what I'm trying to do?
Thanks for any help or advice!

I had exact same problem and I have found a way to get round out!!!! Easy!
So the reason it doesn't allow it to play is for security to stop piracy etc.
Plug in the cable and VGA and aux cable and get everything set up so you are looking at the home screen.
1) select Videos
2) selected the film you want to watch
3) click the little play button
4) it will then come up with the message saying it can't play protected films blah blah blah
5) WITHOUT clicking ok double tap the home button to bring up the multitasking bar and swipe left to reveal the control panel
6) hold fast forward for a second or two and the movie with continue to play!
Stay in the multi tasking bar with the control panel, The message will stay there but don't worry. Kick back and enjoy your iPad movie on the big screen:)
I'm sure your saying thanks:) it was my pleasure realising I've outsmarted apples little security protection thing lol

A connected device could not be accessed

Hi,
Recently when I try to connect my Lumia 800 to Windows Phone 7 Connector to sync and update I keep getting the message "A connected device could not be accessed" It then goes on to ask me to try unlugging it and plugging back in, and if that doesn't work restart the device.
Neither of those fixes have worked
The phone is still working absolutely fine so I am not sure what to do, I am keen to get this latest update so if any one knows how to fix this your help would be appreciated.
Thanks in advance!
Zef

@zzef
You are not the only one with this issue although only one post here since latest release on 25/11/11:http://answers.microsoft.com/en-us/winphone/forum/wp7-sync/windows-phone-7-connector-wont-access-nok...
I posted this on 28/11/11 but believe that unless you have one of the latest Mac this application hogs CPU resources greatly!
Happy to have helped forum with a Support Ratio = 42.5

Wireless OOB NACissue : OOB Error: connected device client_MAC not found.

Dear all,
I've deployed wireless OOB NAC. Some user can login normally, but some other user can not login. The error message is OOB Error: connected device <client_MAC> not found. This only happen at some PC user.
Does anybody have any idea?
Thanks

Dear all,
When some wireless user cannot login, i usually issue command clear mac address-table dynamic on the switches then the problem is solved temporarily. I wonder why this was happened. Is there any parameter that i need to tune in NAC or WLC or switches?

IPod classic connects but is not detected in Diagnostic as "No iPod, iPhone, or iPad found" will not sync no matter what I try. have reinstalled itunes, changed cords, restarted services. Just started happening very recently. diagnostics detection is key.

I have a 120gb Classic that has been working, connecting and syncing flawlessly for years. Now it appears that (maybe since an itunes update) my same Windows 7 x64 computer that has not changed other than the occasional iTunes update will not detect my iPod, and therefore will not sync any more.
The odd thing is that iTunes will sometimes see the iPod (not always), and Windows will also sometime see the iPod. Even when it does, and I click to sync a podcast (or anything else) it appears to go through the #1 and #2 steps and says it is syncing - Do not unplug, then appears to finish, but when you check the ipod after ejecting, nothing has changed. It looks like this has been happening for about a week, but my wife must not have realized that songs and other items were not actually syncing.
I have tried uninstalling iTunes, downloading the 11.2... version available online now, no help. I have tried resetting the ipod, no help. I have tried changing cables, no help. every time I go through the diagnostics in iTunes, it fails the connectivity test and says "No iPod, IPhone, or iPad found.
I am so frustrated. I have tried everything I can think of but even though iTunes shows the iPod, it wont sync....

This issue has been resolved - my Support Advisor, Edgar, was able to discern what was causing the problem.
It appears that, despite years of never experiencing this, one of the latest ipod updates actually altered my device's personal settings and changed it to "Manual" for all synchronizing; even performcing Factory Restores did not change it back to being automatic.
My ipod is working as good as ever now thanks to Edgar. If anyone else is having this problem, please make sure you check your device's settings in iTunes and see if "Manual" is checked - even if you never changed the settings yourself and have no reason to suspect that to be the problem, as was the case here. If it is checked - uncheck it to enable automatic syncing.
So relieved this was not a much more serious problem. I've missed having my music on the go. Thanks, Edgar!

USB Audio Device sometimes not detected. udev, maybe?

I am using an external usb audio device which I usually keep plugged into my machine. I am finding that this device is sometimes not being detected when I boot the computer.
When this happens, issuing the following command:
$ aplay -L
does not list this particular device. Plugging and unplugging the device does not seem to help.
What does seem to resolve the problem is unloading and then reloading the snd_sub_audio kernel module. This is done by issuing the following commands:
# rmmod snd_usb_audio
# modprobe snd_usb_audio
Could anyone give some insight as to why the usb audio device isn't being detected and why this only happen occasionally? Could this be a udev issue? The device in question is an M-Audio Fast Track Pro.

Make a "Genius" appointment at an Apple Store.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

Time Capsule not detected in Finder

My Time Capsule is networked using an ethernet cable to the router with the wireless mode disabled. AirPort Utility does not show any problems with the connections and I previously did not have any problems. However, Time Capsule is now not detected in the Shared locations in the Finder window.
This problem began spontaneously while I was working on some files saved on the TC and I noticed that I was no longer able to save the file due to the loss of connection to the Time Capsule. I checked the connections to the TC using other computers and all seemed to be unable to detect the Time Capsule.
I unplugged the ISP, the router as well as the Time Capsule to renew the IP addresses, but there was no change. I also performed a hard reset on the Time Capsule but it was still undetected by the Finder window, even though AirPort Utility says that it is configured properly and that its status is normal.
Is there any way to obtain my files previously saved on the Time Capsule?

This sounds like it may be related to my issue. We have 5 macs and one new time capsule. Everyone but me is able to backup to the time capsule wirelessly. For me, the TC doesn't show up in my finder as a hard drive - only as a server - (nor is it recognized as in Disk Utility).
Although I can go in and see files that are already on it, I can't back up to it. It keeps asking me for the password over and over. I checked the password in Keychain - and found it listed in there three times - all with the correct password. I'm stumped.
The only difference between my computer and the other four (that I can think of) is that I have backed up my computer to a My Book previously. The others never backed anything up anywhere.
The My Book is not currently hooked up...but I have tried, and found that it still works fine.
Anyone have ideas?

Satellite L855-14G - Devices are not detected in device manager

I've reinstalled my Satellite L855/L855D (installed windows 7 instead of win 8) . And there is a problem : many devices are not found , like ethernet / wireless. Video card Radeon HD 7670M also not found. I can't install drivers, the errors apears that my hardware isn't suitable with software (e.g chipset). On toshiba's website i typed my satellite's serial number, but my computer isn't found. Whats wrong with this laptop ?
Same problem here: [http://www.tomshardware.co.uk/forum/386506-33-devices-detected-device-manager-format-win7]
What should i do ? i've tried lots of drivers , but no one works. Please , give me advice. Thank you.
Toshiba Satellite L855-14G (Toshiba EUROPE GMBH)
Part. No. PSKFWE-00H00FG3
Intel (R) i5 3210M
AMD Radeon HD 7670M
4GB RAM DDR3
Windows 7 Ultimate 64bit

I've entered my satellite's specs on that website and installed chipset utility from that website. But when installion beggins, in description is written , that this version chipset utility (9.3.0.1020) supports i7 proccesors (Target Chipset#: Intel(R) 7 Series/C216 Chipset Family). Is this chipset utility suitable with my Intel i5 3210M proccesor ? One more i've tried Display drivers, but setup isn't starting.

HT4972 i have iphone 3gs v 4,2.1 i want to upgrade to ios 5 i will erase all data, how can i install again the software, and now my device can not detect to my computer? what can i do? please help me..

have iphone 3gs v 4,2.1 i want to upgrade to ios 5 i will erase all data, how can i install again the software, and now my device can not be detect to my computer? what can i do? please help me..

You can not install iOS 5. It is no longer signed by Apple. You can only install the current version of iOS. For a 3GS, that's 6.1.3.
However... if you have 4.2.1 on your phone, odds are it is not a 3GS, it is a 3G. If that's the case, you've reached the end of the road for that. It can not run anything higher than 4.2.1.

Time Machine cannot back up to G-Drive slim which is connected, but does not appear in Finder.

my MacBook Air (13-inch, Mid 2013) using OS X Yosemite10.10.2 has properly connected G-drive Slim, but it does not appear in Finder;
On Screen pop up Warnings:
"Back up Failed Time Machine couldn't back up to "G-Drive Slim" " and
"Disk Not Ejected Properly Eject "G-Drive Slim" before turning it off."

Does the drive show in Disk Utility? Try a restart.

Connected device is not detected on Finder

Similar Messages

Maybe you are looking for