Connecting 3rd Party via Saprouter

Hi experts,
is it possible to connect a 3rd party via saprouter to our sap-systems?
Or is it just possible to connect SAP to the systems?
I already found one entry in SCN, however there was also no solution provided.
Kind regards

Hi Christian,
To connect your SAP system a 3rd Party needs SAP GUI setup at their end & you can provide the sap router string to connect your system via SAP GUI.
For security purposes you can configure sap router string with password option(authentication to access SAP system),so that after confirming job/consultancy by 3rd party you just need to change the password under router string only in regards no one can access your SAP system/network.
Hope this will help you.
Thanks,

Similar Messages

  • Problems connecting 3rd party webservices from workerrole

    Hello,
    I have the problem that since 2015.01.28 ~22:00, my service deployed as a workerrole in an Azure instance cannot reach 3rd party webservices. This was a sudden issue as it worked for half a year without any changes.
    The 3rd party webservices work fine, I can reach them from my development environment without any trouble, the provider of these webservices also could assure me that it works fine for others.
    The call that fails is a simple WebClient call (with credentials) to a URL in order to read a (tiny) file and take followup actions.
    The call fails with the following error:
    System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond
    after a period of time, or established connection failed because connected host has failed to respond <ip:port>
    The question: have there been any changes recently, either in the Azure services environment or networking that could explain this?
    If i connect remotely to the instance and attempt to make the calls manually via IE, they succeed, but very slowly.
    I have deployed the service to another datacenter as a test, so right now I have one running in East US and Western Europe, but both face the same issues. The service is running on Azure SDK 2.1, the instance is running on windows server 2012R2.
    The service works fine when I run it on my development environment via compute emulator. No connection issues.
    Any help is welcome, thanks ahead.

    Looks like a timeout issue. Try to increase timeout of your call to see if you get any success. If OK, then for sure it is timeout problem. Then check if it is DNS problem. Use IP address to call instead of hostname. You mention it is slow in IE. Where
    is IE located? You can also try to call using IP address instead of hostname to see if it speeds up. Is it slow only the first call?
    Frank

  • How to trace Logs for WebService connectivity - 3rd Party to ECC

    Hi Experts,
    Basically it's a simple scenario, the 3rd party will send a soap request with the information in it and wiill be sent to ECC and be written on a table.
    I'm wondering on how to trace logs on the soap request sent from 3rd party to an ECC environment. I used Altova XMLSpy and soapUI and  to create a soap request from wsdl created in SOAMANAGER. Both of the software returns a response. Do these both of these software really sends data (soap request) going to the binded address or it's just i simulation that wsdl created is valid.
    Cheers,
    R-jay

    Hello,
    These third party tools send web service requests to SAP system. You can trace Service invocation and download the request and response payloads using SOAMANAGER. In Logs and Trace tab,  edit the Trace configuration with suitable trace level and expiration time.
    Thanks,
    Venu

  • Trouble connecting 3rd party monitor to MacBook..."OSD Locked" message?

    I am trying to connect my LG monitor to my MacBook air. This monitor worked w/the last MacBook I had (2008 model) and yes, I am using the right cable. The background on the monitor is the same as my MacBook (starry galaxy image) however there are no files. When i tap any button on the monitor (e.g., menu, engine, source, auto/set) I get the message "OSD Locked". I have a feeling this is a setting from my MacBook. Any ideas?

    Hey wrtrgrl,
    Thanks for the question. It sounds like everything is up and running, your preferences may just be set to Extend your Desktop (as opposed to mirroring). Try configuring your preferences to mirror:
    OS X Mavericks: Connect multiple displays to your Mac
    http://support.apple.com/kb/PH13814
    Thanks,
    Matt M.

  • Connecting 3rd Party Monitor to iMac 2.8 Intel Core i7 27"

    Hi Hope somone maybe able to answer this question?
    I would like to connect my Dell monitor to my iMac as a 2nd screen, it has VGA, HDMI, & DVI ports. What would be the best way, can I simply purchase a mini-display port > DVI or VGA adapter or would I require a Dual Link Adapter?
    Thanks in advance
    Mike

    A mini display port cable to either HDMI, VGA or DVI would be fine. The best way to to purchase is to buy it directly from Apple that way you know you are getting a high quality cable that has been well tested.
    BTW, your manual says:
    One or two Thunderbolt ports (high-speed data, video, and audio)
    Connect Thunderbolt-compatible devices for high-speed data transfer, or connectan external display that uses Mini DisplayPort. You can purchase adapters to connectdisplays that use DVI, HDMI, or VGA. The 21.5-inch iMac has one Thunderbolt portand 27-inch iMacs have two.

  • Connecting 3rd party devices to my computer

    How do I connect lap tops and i phones to my imac so that they can access app stores etc?

    Like I said before, you can connect 2 iPods to one computer. However, there are multiple options. If you don't care whether some of his songs are on your iPod, and vice versa, you can use the same user on the computer. Now... If you each want your own library, there's two ways you can set this up: #1 - Create a new user on the computer, and install iTunes 7 there. Then, one of you use one user, and the other can use the created one. The songs can be different on in iTunes on either user, it'w a whole new library. #2 - If you don't want to create a new user on the computer, you can set your iPods to "manually update songs" so that iTunes doesn't automatically put all the songs in the library on the iPod. With this method, you have to manually drag songs you want from iTunes to your iPod icon in iTunes. That way, you can selectively put your songs on your ipod and he can put his on his iPod using the same library.
    Hope this helps

  • Call XI from 3rd Party via HTTP

    Hi,
    i've got a question. At the moment I have a szenario
    Sybase->XI->SAP R3 and it works like this. XI poll every
    10 sec. to sybase and look over a subquery for specific datasets... no I like to make it like this:
    On every commit in Sybase it sends a http request to XI (works already) but how to handle this call in XI (?possible?) and could I use the rest of my already existing process? Means the http request trigger the rest of my process?
    Thanks for reading!
    Matt

    Hi
    >> For BPM
    http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/frameset.htm
    >>If I try to add under communication channel a adapter typ "HTTP" - XI switch automatical from Sender to receiver and its not possible to use it as sender channel.
    There is no need to specify sender adapter for HTTP. But if you want to use it as a receiver then you can create the communication channel for it.
    http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
    Regards
    Suraj

  • Iweb to mobileme or 3rd party via FTP

    Hi,
    Please help.
    I have created a website for the first time using iweb, and I have bought a domain name from 123-reg. 
    I have tried to publish the website through MobileMe, but when it goes to the website I get the reserved card from 123-reg.  I changed the CName on 123-reg to web.me.com, but still no luck.
    I then decided to purchase a Hosting package from 123-reg, in the hope that this would get the site up and running.  It didn't.  I downloaded FileZilla to send the web files as FTP to 123-reg, but the iweb files won't Import.
    So, I'm damned if I do and damned if I don't!  I don't know where I'm at now, who is hosting the site and what details I should be typing in where!!  I'm getting completely and utterly confused.
    Please could someone help explain very simply how I can untangle all of this???
    Thank you very much indeed.

    You would need to publish your site with either the "FTP Server" or "Local Folder" Option

  • I have a 3rd party hard drive with movies on it ,it is connected to my airport extreme. The AE is connected to my tv via ethernet cable. Can I stream my movies to the Tv ?

    I have a 3rd party hard drive with movies on it ,it is connected to my airport extreme. The AE is connected to my tv via ethernet cable. Can I stream my movies to the Tv ?

    Not without a player..
    The AE is a dumb file server.. the hard disk you plug in is an even dumber hard disk.
    There are no smarts in this setup.. not even DLNA. So the TV would have to be an extremely smart one to read raw files on a network drive.. none do that I know of.
    A solution is WD live TV.. it can read files from just about any file source on network and play them to the TV.
    Nothing apple makes will do that.. ATV is a streamer not a media player. Everything in the Apple world is tied up with itunes. So you must have a computer running itunes to use it.
    You can download a more generic player for ipad, and put that as part of the network.. but you still need ATV to display the video.

  • HT1515 My internet 3rd party access point in in the basement and the speakers I want to stream music to wirelessly are upstairs. Does Airport Express need to be connected to my 3rd party router via ethernet cable or will it stream music wirelessly?

    My internet 3rd party access point in in the basement and the speakers I want to stream music to wirelessly are upstairs. Does Airport Express need to be connected to my 3rd party router via ethernet cable or will it stream music wirelessly?

    Wirelessly
    Just select the option to make your AirPort Express join an existing network in the setup process

  • 3rd Party 24" LCD on a Mac Pro via VGA

    Hello,
    I have my Mac connected to a 3rd Party 24" LCD via a KVM, which restricts me to using VGA for the connection. With my G5, I was unable to run at 1920x1200 until I upgraded to a Radeon 9800 Pro ME video card. I'm having the same issue with the NVIDIA card in my Mac Pro. It offers me 1920x1200 @ 76Hz which doesn't work with my monitor. I have checked a half dozen other monitors and none of them say that they will run at 1920x1200 and all of them recommend 1920x1200 @ 60Hz. I have that option with the 9800 Pro in the G5. Is there a way, short of changing video cards, of getting that option on the Mac Pro with the NVIDIA 7300 GT? If not, will the Radeon X1900 give me that option?
    Thanks,
    Bill

    I found two solutions to this problem (though I'm running the ATI XT2600).
    SwitchResX is available from <http://www.madrau.com>. The full featured program expands your video choices from the menu bar, but if you just need to make more resolutions available, the free SwitchResX app is all you need.
    There is a hardware solution - the Gefen DVI Detective Plus lets you set parameters for a monitor and it then generates the appropriate signals to make the computer think that monitor is attached.
    SwitchResX worked nicely for me, and is free.

  • I have a PVR which supports DLNA connected to my home network.  I want to access files on my MacBook from the PVR.  I understand that my MacBook doesn't support DLNA. Is there any 3rd party  software that I can install on my MacBook to provide DLNA?

    Hi,
    Can anyone help me please.
    I have a Personal Video Recorder (Humax HDR-1010S), which supports DLNA, connected to my home network via Wi-Fi. 
    I want to play music from iTunes and view photos from iPhoto from my MacBook (which is also connected to the home network) via the PVR / TV / Home Cinema sound system.  I understand that my MacBook (running OS X Mavericks) doesn't support DLNA server.
    Is there any 3rd party  software that I can install on my MacBook to provide DLNA server?
    Thanks,

    My recollection is that the iPhoto library has some fairly robust protections to prevent inadvertent or even deliberate changes being made that might have unwanted consequences. I'll take alook at my setup and let you know if I can see anything that might help you. Even if you get Serviio to "see" the iPhoto library, it almost ceratinly won't show the album structure and names. What I did is to export each iPhoto album to a standard folder with the appropriate folder name. These I keep on an external backup disc and Serviio can see these without trouble.

  • Several 3rd party apps can't connect to internet?

    Recently, several 3rd party apps on my mbp have been unable to connect to the internet. These include but are not limited to: Dropbox, Google Drive, Skype, Transmission, Evernote, Steam, Trillian, plex, several little useful apps such as mailtab for gmail. The Mac App Store is also having issues. I can, however, use Safari to browse with no issue at all. I'm connecting via wifi, no proxies or vpns or anything like that. Can anyone help me out here?

    You don't give any examples of the apps that are not working.
    Some public WiFi networks will only have certain network ports open, like those for web and mail. If an app uses an unusual network port then it may not work on the public WiFi network.

  • Topic: Microsoft's Silverlight for Mac. I wanted to video stream a movie via Verizon FIOS. It demanded Silverlight.dmg Macbok Pro refused to download from 3rd party supplier (CNET). How can I get this?

    Topic: Microsoft's Silverlight for Mac. I wanted to video stream a movie via Verizon FIOS. It demanded Silverlight.dmg.  Macbok Pro refused to download from 3rd party supplier (CNET). How can I get this from Apple?  The Verizon FIOS video website was churning on the error message, "Checking device registration status."  It got stuck in a loop. Verizon tech support never came on. Was on terminal "Hold."  Any recommendations?

    Never download anything from CNET. The site is untrustworthy and is known to distribute Windows spyware intentionally.

  • Connecting my iPhone 4S with 3rd party composite cable; error "accessory not supported by iphone".  Sound comes through and it charges but NO Video???

    Connecting my iPhone 4S with 3rd party composite cable; error "accessory not supported by iphone".  Sound comes through and it charges but NO Video???  I have verified the cable, I can play video with sound from iPod Nano 4th gen.

    composite don't support mirror so it will only display on the tv when the app being used support tvout option
    the build in video app does so it should display on the tv at least my composite cable does with my iphone4
    the audio always works it's pretty much works like a headset

Maybe you are looking for