Connecting Canon MF4350d via usb under OS10.9.4 scanner driver won't install

When driver loaded, the printer/scanner does not show up in the add + list.  Canon "ToolBox" will not open.  Canon site says they support MF4350 thru OS10.9.3
anyone had any luck with work around?  It prints (different driver) just fine.

sanrr wrote:
I tried to add a device, the only new choice was the MF4350 FAX which is including in the scanner driver along with the tool box.  I added the fax device, no tool box in MAC Doc.
To use the scanner, you do not add it to the Printers & Scanners preference pane. So as you have noticed, the scanner component does not appear in the Add window when you select to add a printer or scanner.
sanrr wrote:
Also, you said to select scan on the MF then send to computer, don't understand that.  There is no send to computer choice on the MF in scan mode.
Sorry. Slightly wrong information. The MF devices that have an Ethernet port or WiFi support will show you more than one option when you press the Scan button on the MF. With your model only having USB, then pressing the Scan button will only show Scanning Mode, which is correct and what I should have said.
So with the MF set to Scanning Mode, open MF Toolbox and click on Scanner on the menu bar. You should see the MF4350 USB in a window similar to what I have shown below
Note that I think you will see MF4340-4350 USB. Which mentions the MF4350 as connected via USB, ensure this is selected (highlighted)
With the MF43xx USB connection selected, you can now click the Save button as shown below
This will display a new window letting you set your scanning preferences, similar to that show below.
If you can get this window to display, click the green Start button to test that you can scan a document. If this does not work, then please reply. If it does work, then you are ready to being scanning from the Mac.

Similar Messages

  • Connecting my 6630 via USB

    O/S - Win XP SP 2
    Phone - 6630
    PC Suite - 6.81.13
    Hi
    I'm trying to connect my 6630 via USB, i've installed and re installed PC suite but even though Windows recognises my phone, and installs the drivers etc. the Get Connected dialog on PC Suite shows as connecting but there is no response. What might be the problem and what should I do?
    YK

    What is the response you are waiting for ? What areyou trying to do with the PC Suite and how ?

  • Connecting MIDI controller via USB

    Does anyone know how to connect a Roland SH-201 to a MacBook Pro via USB to use as a midi controller in Logic Express 8. I've installed the SH-201 driver, however I am getting a warning saying it is not compatible with an Intel based Macbook.
    Just some general guidance in connecting a keyboard via USB to work within Logic Express 8 would be good.
    Thanks.

    Well, if the synth's USB driver is not compatible with your laptop's system, there is nothing you can do about it I'm afraid. There is always an option to get a portable USB to MIDI Interface (price would be around $20-50, I think) and connect your synth to Macbook Pro through it.

  • While restoring iphone 4 8gb it is stuck at the connect to itunes via usb screen

    While restoring iphone 4 8gb it is stuck at the connect to itunes via usb screen

    Hi tanuj178,
    If you had an issue while restoring your iPhone and are now seeing an icon instructing you to connect to iTunes, you may find the following article helpful:
    Apple Support: If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Regards,
    - Brenden

  • Is it possible to connect two Macs via USB ?

    Is it possible to connect two Macs via USB just like Firewire back in the day via Target mode or is there something similar? I am asking this because about 2-3 years ago I would normally image Macs via Target Mode. I used to have a regular Macbook running 10.6 along with a customized-ready-to-go .dmg image saved on the Desktop. Whenever I needed to put that image into any Mac I would simply connect the two Macs via Firewire, I would then press "T" at startup which will get me in Target Mode, I would then see the disk appear in the desktop of the Mac I had the image. I would then copy that image to the T mode macbook using super duper. Can this still be done through USB with new models and if so will I also need to press T at startup ?

    No, USB connection does not qualify for this, only firewire and thunderbolt, as I read (but cannot test, for the time being I have only one such mac around).
    This is why the short series of alu MBs (2008) are not qualified for target mode either.
    p.s. What ‘new models’ do you refer to?

  • HT1386 During iTunes update on my pc, my iPhone was connected to pc via usb & was syncing, suddenly my iPhone stopped connecting to wifi and cannot activate. I cannot access iPhone data as it says connect to iTunes to activate but cannot connect

    During iTunes update on my pc, my iPhone was connected to pc via usb & was syncing, suddenly my iPhone stopped connecting to wifi and cannot activate. I cannot access iPhone data as it says connect to iTunes to activate but cannot connect. How do i connect to iTunes to activate iPhone as iPhone cannot connect to WiFi or any other network
    Please how do i reactivate iPhone?

    Hello DadiPrince,
    The following article contains information beneficial to getting your iPhone back into normal working order.
    iPhone: Troubleshooting activation issues
    http://support.apple.com/kb/TS3424
    Resolution
    Perform the following steps if you receive one of the messages above:
    Restart the iPhone.
    Try another means of reaching the activation server and attempt to activate.
    Try connecting to Wi-Fi if you're unable to activate using a cellular data connection.
    Try connecting to iTunes if you're unable to activate using Wi-Fi.
    Restore the iPhone.
    If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Applefor assistance.
    All the best,
    Allen

  • Connecting 6720 Classic via USB crash PC USB devic...

    When connecting 6720 Classic via USB cable to my Acer laptop all USB ports on laptop seize to work and Windows display a message that the USB device has malfunctioned. Eventually the PC is permanently stucked and only way to proceed is reset laptop on power button and prior to that remove the laptop charger to entirely power it off and let it reboot on battery. Harddisk controller is permanently indicating with a green light but harddisk is not spinning. When this happens the Nokia phone does not prompt for USB usage (connection type) and is also hanging in application execution for a while. I would like to be able to configure the phone not to charge via USB, but have not found a way to do that. I believe that the charging via USB is creating a low level hw driver and power surge problem in my laptop. Problem is not consistent but happens from time to time. When connecting the normal 230 VAC charger to Nokia device so the Nokia device is charging when connecting to laptop via USB the problem does not occur. In this situation the Nokia device will not try to charge from USB connection.
    Any possibility to disable the charging over USB on the Nokia 6720 Classic device??

    I had the same problem with my 6720 when I connected it to my HP laptop via USB to download maps. It crashed my computer making all USB ports unusable until I restarted the computer again. I think it happened after I downloaded the necessary software upgrade. I had to eventually use bluetooth to transfer maps data to my phone. It worked without any hitches. Can someone at Nokia fix this problem with the USB?

  • What is the difference between connecting a printer via USB or Ethernet ?

    What is the difference between connecting a printer via USB or Ethernet ?

    When a Printer with an Ethernet connector is connected via Ethernet, it becomes a peer device on your Network. It is available whenever it is on for all users on your Network.
    When connected via USB, it relies on your computer to "Share" it onto the local Network. It is only available when the attached computer is on. It takes resources from that computer to facilitate printing for any User.

  • I can't seems to print using my macbook air with hp series printers. When I plug the printer via usb to my system, the printer was recognized and installed. But when i send a doc for printing, it doesn't print all . Any help?

    i can't seems to print using my macbook air with hp series printers. When I plug the printer via usb to my system, the printer was recognized and installed. But when i send a doc for printing, it doesn't print all . Any help?

    Greetings,
    Here's a direct link to the drivers you need, they should work perfectly for your situation.

  • Acrobat 9 tells me that "Either Scanner Driver is Not Installed or Scanner is Not Connected."

    I have Acrobat 9 and I get a message saying that "Either Scanner Driver is Not Installed or Scanner is Not Connected" when trying to scan from a document. This happened on two separate scanners with updated drivers. I already tried rebuilding my Acrobat installation to no avail. I'm using Windows XP.

    Problem fixed.

  • Trying to connect Canon MF6540 via IP to Airport Extreme

    I recently purchased an Airport Extreme so I could use the USB port to attach a hard drive to run Time Machine for my two laptops wirelessly. I wanted to connect my Canon MF6540 printer via IP (like I'd done with my old Linksys router).
    Unfortunately I've called both Canon and Apple support and neither can help me.
    According to the printer network settings the Airport Extreme is not automatically assigning an IP address and I don't know enough about networking to manually assign one.
    Can anyone help me?

    L_O wrote:
    I don't know how to ping on a mac - could you help?
    Go to your Utilities folder and launch Network Utility. You'll see a tab labeled "ping". Enter the address of the printer and hit the button.
    You can also use the Terminal program. It's also in the Utilities folder. Type "ping 10.0.1.200" or whatever address your printer uses. Control-C to quit.
    Either of these methods should return something like the following:
    Johns-iMac:~ john$ ping 10.0.1.100
    PING 10.0.1.100 (10.0.1.100): 56 data bytes
    64 bytes from 10.0.1.100: icmp_seq=0 ttl=255 time=3.325 ms
    64 bytes from 10.0.1.100: icmp_seq=1 ttl=255 time=3.407 ms
    64 bytes from 10.0.1.100: icmp_seq=2 ttl=255 time=2.531 ms
    64 bytes from 10.0.1.100: icmp_seq=3 ttl=255 time=4.346 ms
    64 bytes from 10.0.1.100: icmp_seq=4 ttl=255 time=3.247 ms
    64 bytes from 10.0.1.100: icmp_seq=5 ttl=255 time=3.618 ms
    64 bytes from 10.0.1.100: icmp_seq=6 ttl=255 time=2.896 ms
    64 bytes from 10.0.1.100: icmp_seq=7 ttl=255 time=3.479 ms
    64 bytes from 10.0.1.100: icmp_seq=8 ttl=255 time=2.851 ms
    64 bytes from 10.0.1.100: icmp_seq=9 ttl=255 time=4.155 ms
    ^C
    --- 10.0.1.100 ping statistics ---
    10 packets transmitted, 10 packets received, 0% packet loss
    round-trip min/avg/max/stddev = 2.531/3.385/4.346/0.534 ms
    Johns-iMac:~ john$
    10.0.1.100 is the address of my printer. If you're not getting anything like the above there's something wrong with your network connection so that's what we have to fix first.
    Wireless security has been turned off but I don't know if that matters since I'm connecting directly via a Cat5 cable.
    Correct. Doesn't matter.
    Canon's setup utility is only for PC... so I'm out of luck on that.
    Are you sure about that? Check the following - they're labeled "drivers" but make sure they're not something you need:
    http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=164&mo delid=16478#DownloadDetailAct

  • HP Deskjet 2540 - connect to pc via USB, can I print from android tablet as well?

    Hi,
    I've just bought a HP Deskjet 2540 all in one printer.
    I have set it up via USB connection to my windows 7 pc, and it is printing fine.
    I also have an android tablet.  Can I also print from this whilst using the printer via USB on my pc.
    Any help on if this is possible and what steps I need to do if it is would be appreciated (I have been reaeding the help section on the website but I am just getting more confused).
     Lesley

    Hi @Lesley54R,
    You don’t need to have the printer listed with the two different connections unless you’ll be switching back and forth from being connected by USB cable and wireless.  You can delete the one you don't think you'll be using.
    To print the web page, please use the browser found within the app. I’ve included the ePrint Mobile App FAQs document for your reference.
    In addition I’ve also included the ePrint Product Specifications document. This document has the list of supported email programs, file types and print limitations.
    Hope this helps!
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Job stops (HP DJ 3550 connected to AEX via USB)

    Hi everybody,
    Here is the setup:
    1- PB G4 15" w/ MacOS X 10.4.2 uptodate w/ Airport Extreme card installed
    2- Airport Express base (firmware 6.2) setted using Airport Admin Utility 4.2:
    - Home router
    - WAN: ADSL modem connected using PPPoE
    - USB: HP DeskJet 3550 (recognized by system)
    - Network managed by DHCP & NAT
    - No Port Mapping, no Access Control, no WDS, no Music
    3- HP DeskJet 3550 connected via USB to AEX
    4- Printer added to PB using Printer Setup Utility V4.1 (157.2):
    - hp deskjet 3500, connected through Bonjour
    - Driver HP Inkjet 2.7.1
    From whatsoever application I print, it starts the job in the printer queue then stops (msg Jobs stopped).
    I included the console file for the experts...
    I tried reset, driver, update... you name it, it still doesn't work.
    It works using the USB and a Airport Extreme Base Station.
    I know that this printer is not in the compatibility list, but it really works with my AEBS!!
    Any help would be very appreciated as I am completly clueless...
    Thank you in advance... Pascal

    Hi Chris, thank you for the update and the trick.
    I have also some (good) news on my side.
    I tried the same as you did (restarting/reseting the AEX several times) and, effectively, the printer worked... until it stopped again a few prints after.
    So I went with the hard way (no, it is not throwing the AEX by the window).
    I installed the HPIJS and declared the printer as a network component with an IP address (like if it has a JetDirect). Now the problem is definitly fixed.
    Here are the steps:
    (see also page http://www.ifelix.co.uk/tech/1300.html)
    go to page http://www.linuxprinting.org/macosx/hpijs/ and download both softwares:
         - hpijs-foomatic-2.0.2.ppc.dmg
         - espgs-7.07.1.ppc.dmg
    Install them.
    Go to Printer Setup Utility
    Add a new printer
    Select IP Printer
    Select Protocol HP Jet Direct - Socket
    Enter address: 10.0.1.2 (or the address of your AEX)
    Queue: leave blank
    Name: HP DeskJet 3550 - HPIJS (or the name you want)
    Location: Airport Express Base (or the location you want)
    Print using: HP
    Select model: HP DeskJet 3550C HPIJS (or your model)
    Set the printer as default if necessary

  • Centro can no longer connect to PC via USB

    I bouhght a new PC recently and since then I can not get my Centro to connect to the computer via USB.  Ive installed the software and driver and it still says no driver detected whenever I plug it in. Its also popping in and out of the device manger screen like its keeps getting unplugged andplugged back in . Ive tried both the cd driver and downloadable one.
    Im running Win7 now, but was using Vista64 Home Prem when I first got the computer..
    I never had any problem on my old cpompuer which was running Vista32 Home prem
    Post relates to: Centro (Verizon)

    Hello JalenTigh, Welcome to the Palm Support Community.
    Unfortunately, Palm Desktop software has never had a driver for any 64-bit operating system.  This has been true for XP64, Vista64, and now Windows 7 64bit.
    If I could direct your attention to the Windows HotSync section of this forum you will find many large threads discussing your issue at the top of the section.
    You will only be able to sync via a Wireless connection - on your Centro, this would be via BlueTooth.
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • I was using a ps3 controller connected via usb as a gamepad when I had Snow Leopard installed - the other day I downloaded Mavericks and now it no longer works. Solutions?

    I moved from 10.6.8 (Snow Leopard) to 10.9 (Mavericks). Apple support won't help because it's not their hardware. It's not a playstation controller, it's Spartan brand, and it never connected via bluetooth (it continues to not connect via bluetooth in Mavericks which is fine). I always just plugged it in and it ran because apparently Apple included drivers for it from Snow Leopard onward. However, in Mavericks that's not the case, as when I plug it in nothing picks it up, and when I tried to connect it via bluetooth I would enter the pairing code and then it wouldn't pair. Anyone got any thoughts/ideas?

    Thanks for no help. Such a supportive community. I figured it out on my own. I can only connect it via usb cable (which I'm happy with) and in order to do that I had to go through the bluetooth connection steps for some reason. It doesn't show up as paired but I did the steps outlined in this video - http://www.youtube.com/watch?v=Efk77f6d98Y -, plugged the controller in via usb cable and then it worked.

Maybe you are looking for