Connecting mobile phone to Oracle VM 2.2

We would like to connect a cellullar phone to a virtual machine. Connecting this phone to the hypervisor is detected as /dev/ttyACM0
[root@vmserver10 scripts]# xm block-attach picmon04 phy:/dev/ttyACM0 xvdb:disk w
Error: Device 51728 (vbd) could not be connected. /dev/ttyACM0 is not a block device.
Usage: xm block-attach <Domain> <BackDev> <FrontDev> <Mode> [BackDomain]
[root@vmserver10 picmon04]# lsusb
Bus 003 Device 001: ID 0000:0000
Bus 001 Device 003: ID 0421:0802 Nokia Mobile Phones CA-42 Phone Parent
Bus 001 Device 001: ID 0000:0000
Bus 001 Device 002: ID 413c:a001 Dell Computer Corp. Hub
Bus 004 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
picmon04 has only configured a xvda, maybe needs to be connected somewhere else? Any idea?
Thanks a lot,
Marc Caubet

Marc Caubet wrote:
We would like to connect a cellullar phone to a virtual machine. Connecting this phone to the hypervisor is detected as /dev/ttyACM0/dev/ttyACM0 is a serial device, not a block device. You cannot attach it with block-attach. However, you've attached it via USB as well, so you may be able to use USB techniques to get it into the guest:
http://wiki.xen.org/xenwiki/XenUSBPassthrough.html

Similar Messages

BT and Java - Btl2Cap Connection (Mobile phone and Digital Pen)

Hi!
First a short Introduction:
For a project I have to stream data from Maxell Penit DP201(4.1) to a mobile device (over a midlet). Data Connection is built up over Bluetooth.
My Questions are: Is btl2cap the right method for connecting digital pen and mobile phone?
If yes, is the btl2cap string correct?
The pens device adress is 00-07-CF-56-05-5D
Does anyone know a sample application like this I want to program?
Structure;
package /
Midlet
Class extending thread
Here's the code:
public void run() {
    //Bluetooth
    //String connString = "btspp://0007808303AA:1;master=false";
    String connString = "btl2cap://localhost:0007cf56055d;ReceiveMTU=512;TransmitMTU=512";
    System.out.println(connString);
    try {
            LocalDevice local = LocalDevice.getLocalDevice( ) ;
// build ServiceRecord
            local.setDiscoverable(DiscoveryAgent.GIAC);
L2CAPConnectionNotifier service = (L2CAPConnectionNotifier)
Connector.open(connString);
ServiceRecord sr = local.getRecord(service);
// accept Connection
L2CAPConnection connection = (L2CAPConnection ) service.acceptAndOpen( );
        } catch (Exception e) {
            e.printStackTrace();
        }Thanks to all who can help me to reach the next step in my project.
Best regards

Hi,
The reason for the compilation error is that the IDE is not able to find the jar file where bluetooth api is packed. try to put the jar file in lib directory of the project. Some IDE generates class files even though there are some compilation errors in java file.
So it is better to resolve compilation errors before putting it in the device.
The reason why the app freezes in the device is that you have not used a seperate thread to do the inquiry, try to use a thread where the inquiry will be done so that the apps main thread will respond to the user input.
Hope this help you.

Most of the menu bar disappears on connecting mobile phone

So, I have a strange glitch happen when I connect my Mobile Phone under Snow Leopard.
Once I connect it, a new icon appears, showing five progressively bigger bars (just like a network measure), I suppose it's something to do with the mobile phone's network connectivity/modem.
Anyways, a few seconds later, the following message appears:
'A new network interface has been detected.'
After this, most of my icons on the menu bar disappear, including the wi-fi, bluetooth, battery, date, clock, etc. Spotlight intermittently appears and disappears, but I can't use it at all (neither by clicking or using the shortcut).
I have created a new user account, and the exact same problem happens, so I suppose it's not my user account problem.
I'm using a Sony Ericsson device, btw.
Just wondering if someone else had this problem?
The device has bluetooth ruined, so I need to connect it to sync, etc (as well as recharge).
Since I believe this is somehow related to SL trying to create a new Network connection through the mobile phone, and I don't really care about that, is there any way I can disable SL to NOT try to establish a modem connection with it automatically?
Disabling it really doesn't work, because SL simply creates a new one automatically, which is kinda silly, and I really don't get why it does that...
cheers.

I'm having this exact problem as well. (Spotlight's behaviour is actually SystemUIServer crashing and restarting in an endless loop.)
I'm going to submit this to the Bug Reporter but temporary workarounds are very welcome since it's frustrating to have to log out and in again every time I plug my cell phone in!

Connecting mobile phone to 4.1 system

how can i connect my motorola v3i to my creative 4.1 inspire speaker system?

Marc Caubet wrote:
We would like to connect a cellullar phone to a virtual machine. Connecting this phone to the hypervisor is detected as /dev/ttyACM0/dev/ttyACM0 is a serial device, not a block device. You cannot attach it with block-attach. However, you've attached it via USB as well, so you may be able to use USB techniques to get it into the guest:
http://wiki.xen.org/xenwiki/XenUSBPassthrough.html

How Can I send SMS to a Mobile Phone within Oracle

How Can I send SMS to a Mobile Phone within Oracle

It depends on how you are planning to use this feature.
You can set up a mobile using special software in order to interface to it programatically - you can then, via this software interface, use this mobile to send SMS's.
Some service providers support an e-mail interface. Where you send the SMS as a the e-mail content and the mobile number as the recipient's address, or as the subject of the e-mail. However, many service providers have long since stopped providing this type of mail interface due to abuse. Remember that service providers are there to make money - not offer one a service via bulk SMS's can be send.
Some service providers have dial-up servers that works like the old style bulletin board systems (BBS's) of the 90's. You use a telnet like interface, dial into this BBS, and is prompted for mobile number, message to deliver, and even delivery confirmation. You can expect the cost of this phone call to this system, to also cover the cost of sending the SMS.
Some companies provide a software server to interface with one or more service providers - this allows you to fairly easily use this server gateway to send SMS's for you. Such a gateway server will typically support a telnet interface - allowing you to send SMS's via it from inside PL/SQL.
I've used all these options, and I've found the best one to be the last option. It is the easiest to use from a programming perspective. It comes with various management and reporting tools. So you need to do the very minimal in managing this whole SMS interface.

Forms: connect mobile phone to send SMS

Hi Gurus ,
I am using
        Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE    10.2.0.1.0      Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
   and oracle forms 10g 10.1.2
I wanna connect my mobile lets say (nokia , glaxy , qmobile) to forms and on any trigger like button pressed, send messages to selected cell numbers from the database..
is it possible ?
thanks
regards:
usman noshahi

If you like to send sms from your client (forms based application) you must do a PJC (plugable java component).. For sending and receiving datas from RS232 you can use a RXTX library (http://rxtx.qbang.org/wiki/index.php/Main_Page).
If you like to send sms directly from your remote database (I think) you can import apropriate rxtx jar library into your database and write down a java stored procedure..
Third way you can implement a java Class which sends sms and expose it as webservice on your remote server.. From plsql is easy to communicate with webservice and so you can also send sms..
I have done a java bean for Hypercom POS terminal which is connected over RS232 with forms application (using rxtx library)..
Edited by: peterv6i.blogspot.com on May 8, 2012 8:11 AM

Connecting Mobile Phone to HomeHub2

For a year or so now I have had no problems connecting my HTC Legend phone to the internet. Now I cannot connect at all. The phone picks up the strong wireless signal, but the connection process stops at 'Obtaining address'. It's the same problem on the previous Hub. It isn't a phone problem - it connects to the internet via all other available wifis I've tried, including the Vodafone shop. It would seem to be a Hub fault. Help please!

Assuming that you are trying to connect to your own home hub, as sometimes people have mistaken an adjacent home hub for their own.
I guess you have entered the correct wireless key, checking that the it is identical in case and letter/number combination.
The next thing to try is to change the wireless mode to B/G only, and select WPA only, and not WPA/WPA2.
See if any of these help.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Satellite L555-10T - Can't connect mobile phone or other BT device

Im having the same problem. I have bought a L555-10T but I cant connect to any phone or any other bt device. Not even a headset or simpel hp pda.
Is reinstalling the bluetooth files the only sollution? Cause BT was build in this win 7 64 machine. Its kinda weird to have to repair something that was deliverd with the laptop.

Which color has your Bluetooth system tray icon (it should be blue/white) ?
If it is blue/red, then check if you have really Bluetooth inside.

Connecting mobile phone to my bt home hub

Hello can anyone help me please i have just bought a Samsung Galaxy S 2 and I have been trying since monday to connect to my home hub and it just wont work I can find my BT Home Hub on my WIFI available networks it asks me to enter my password which I did but it just wont connect.
Any help would be greatly appreciated.
Magsmitch

Hi are you entering the hubs wireless code ?
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

IP of mobile phone

Hello friends,
Can any one tell me that can I access the ip address assigned to my mobile phone while using GPRS?? Can I use same ip to connect mobile phone using server? i.e. can I ping to mobile phone from server using same ip ??
E-mail me on::[email protected]
Message was edited by:
sanketshinde

You could connect to http://www.whatismyip.org/ for instance to get your ip address. There is no general way to get it in midp.
Also note that a lot of mobile networks use NAT, so you won't be able to connect to it from the internet.

How to login Oracle Social Network on mobile phone?

I downloaded Oracle Social Network at mobile phone, and install it.
After open, I input the username and password. click connect. got setting error. "A host is required"
What should I input at host field?

{... unlocking...}
user 1015988,
Please note that the forum space for that product is an archived space.
There has been no usable activity in it since Spring 2013.
That archive status and lack of activity suggests the OTN forum site is not expecting it to be continued as a resource.
I suggest you go that link for the software product, get ALL the documentation and every software component download, then consider spending time within the various Oracle Cloud spaces of the forums. Go read months of Cloud postings before you think about initiating your own post(s). You may find that the Social Network product isn't what you initially guessed but is a bigger suite of applications that requires a bigger investment in time and hardware than you choose to do.
{ ... locking back up, again ... }

Using HP ePrint with mobile phone internet connection

Hello, I have a peculiar problem.
I have an HP Officejet 4630 e-All-in-One series printer and I want to set up HP ePrint.
I have internet connection for my laptop computer, which is the computer I use. It too is a HP. To set up your HP ePrint account you need the printer's code number which can be printed from the printer's control panel. Once you have the printer code, you can then enter it in to your account to add your device. My problem is that my interent connection is the mobile phone which I use to connect my laptop to the internet. The printer is then connected to the computer using either the direct wireless feature or using the supplied USB cable. Because of this, I can't obtain the printer's code, from the printer's control panel. I do not use landline internet connection as the mobile phone is used as a modem.
What do I do?????????
Can I just phone technical support and ask them to email my printer code??????
This question was solved.
View Solution.

Jagaccountant wrote:
... Can I just phone technical support and ask them to email my printer code??????
Hi,
No, this is not going to work and WON'T work at all. Your printer MUST be connected to the internet to allow ePrint to work. No point to send an email to printer and it is NOT there.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to connect PC to a mobile phone to make a call.

Hi all,
I want my PC to control the mobile phone (its a CDMA phone). I want to connect the phone with my PC through some cable, then I want to control the phone using the program running on my PC.
Like, I want my program running on PC to make calls through the mobile phones.
Does anyone have any idea that how can I do it, what API should I use, any sample code or example.
Thanks.

Except TextNow is another Voip service. Just like Skype, Viber, etc. It may be a good Voip product but it doesn't use the mobile cellular network which is what the OP was interested in.
http://support.textnow.com/entries/20588531-What-is-the-Difference-between-A-Tex tNow-Phone-Number-and-TextNow-Address-
Many iPad models now have exactly the same hardware as iPhones and should be completely capable of making and receiving calls and texts using a cellular network. Yet they cannot, because Apple limits this functionality through the ios.

Satellite M40-237: How to connect the mobile phone with Bluetooth

I have a new Noki 62333 and I have a Satellite Toshiba M40- 237. I have a big problem with the conection between them. I don t know how to turn on bluetooth on my pc. Can you help me????

Hello Iva
A friend of mine has Satellite M40 and I know that this unit is delivered without BT module. If the unit has BT module you will find BT label on the bottom side of your notebook.
To establish BT connection with his mobile phone he uses BT USB stick.
By the way: does Iva comes from Zagreb, Croatia?
Bye

New iMac and Bluetooth connection to mobile phone

Hi,
I have a brand new iMac 21.5", 3.33 GHz here and I use a Motorola KRZR K1 mobile phone and the emitSMS widget, to send SMS messages.
But this widget can't detect the Bluetooth connection to the mobile phone.
I delete the bluetooth preferences, but this does't help.
On my MacBook with MacOS X 10.6.2 is no problem.
Anybody an idea, what's the problem?

Hi again,
Can it be, that's a problem with the last Airport Client Update?
On my MacBook is this update not installed and there is no problem.

Connecting mobile phone to Oracle VM 2.2

Similar Messages

Maybe you are looking for