Connecting to AOP data store with multiple NIC's

I have a situation where I need to have the computer running Diadem to be connected to two different networks. I have two NIC's installed in the machine, NIC A and NIC B, we will call them. The reason for this, is that I am using Diadem to access an AOP server on an AVL PUMA machine. If I connect PUMA to the LAN, PUMA occasionally crashes, probably something to do with the IP address. So, PUMA needs to be on a network that does not have a router. My diadem computer needs to communicate with PUMA, and with the local shared drives on our company network.
Anyway, I have the company LAN hooked up on NIC A, and the PUMA network hooked up on NIC B. Diadem fails to connect when both networks are connected, but connects to the data store no problem when only the PUMA network is hooked up. Any ideas how to fix this? It seems diadem is looking at NIC A instead of NIC B, like it should be.
For reference, when both NIC's are hooked up, I can access share drives, and ping computers on both separate networks, without a problem, so it's not a connection issue.
Any help would be appreciated.
-Russ
Solved!
Go to Solution.

I assume poth NIC have different IP range.
- Did you use IP instead of server name.
- Do you use RPC or CORBA to access the PUMA server?
- Which DIAdem version.
Can you create a logfile when the connection fails?
Greetings
Andreas

Similar Messages

How can I convert string to the record store with multiple records in it?

Hi Everyone,
How can I convert the string to the record store, with multiple records? I mean I have a string like as below:
"SecA: [Y,Y,Y,N][good,good,bad,bad] SecB: [Y,Y,N][good,good,cant say] SecC: [Y,N][true,false]"
now I want to create a record store with three records in it for each i.e. SecA, SecB, SecC. So that I can retrieve them easily using enumerateRecord.
Please guide me and give me some links or suggestions to achieve the above thing.
Best Regards

Hi,
I'd not use multiple records for this case. Managing more records needs more and redundant effort.
Just use single record. Create ByteArrayOutputStream->DataOutputStream and put multiple strings via writeUTF() (plus any other data like number of records at the beginning...), then save the byte array to the record...
It's easier, it's faster (runtime), it's better manageable...
Rada

How create data store with PermSize 512MB on WIN32?

Hi!
How create data store with PermSize > 512MB on WIN32? If I set PermSize > 512MB on WIN32, then data store becomes invalid.

Thanks for the details. As I mentioned, due to issues with the way Windows manages memory and address space it is generally not possible to create a datastore larger than around 700 Mb on WIN32. Sometimes you may be lucky and get close to 1 GB but usually not. The issue is as follows; on Windows, a TimesTen datastore is a shared mapping created from memory backed by the paging file. This shared mapping must be mapped into the process address space as a contiguous range of addresses. So, if you have a 1 GB datastore then your process needs to have a contiguous 1 GB range of addresses free in order to be able to connect to (map) the datastore. Unfortunately the default behaviour of Windows is to map DLLs into a process address space all over the place and any process that uses any significant number of DLLs is very unlikely to have a contiguous free address range larger than 500-700 Mb.
This problem does not exist with other O/S such as Unix or Linux nor does it exist with 64-bit Windows. So, if you need to use a cache or datastore larger than around 700 Mb you need to use either 64-it Windows or another O/S. Note that even on 32-bit Linux/Unix TimesTen datastores are limited to a maximum size of 2 GB. If you need more than 2 GB you need to use a 64-bit O/S.
Chris

DataSocket fails intermittently with multiple NICs enabled using LV7.1

Using LV7.1 and Datasocket v4.2, I was intermittently (but quite often) having problems reading and writing to the datasocket server (primarily from the server side). My application should read the value in the item and upon finding a specific string it should immediately follow it with a write of a default string. However, it can find the same string multiple times and not complete the write. Logging the errors from the write shows that no error is occurring. The client is not at fault because it only writes the string once every few minutes. I was able to finally show that by disabling the extra NIC on my system running the datasocket server that the connection seems to operate reliably. Both NICs
were set to static IP addresses, but only one was connected. I do have the program writing to "dstp://localhost/UUT" as opposed to a specific IP address (not sure if it matters).
With Labview6.1 I did not have this problem. It was only after I re-compiled my application with LV7.1 that I started having issues.

Philip,
I do not feel I am running out of bandwidth since I have run it successfully on 1Gbit NIC connections on a P4 2.4GHz system as well as a 10/100Gbit NIC on an old 650MHz system with LV6.1. I only do two writes per variable (on up to 8 variables) once every few minutes. I did not seem to be a re-entrant VI issue.
I have created two VIs which should allow you to recreate the failing conditions with multiple NICs enabled. It responds very quickly with one NIC enabled, but when one or two more NICs is enabled, it gets very slow to respond and has some timeouts.
One VI is the writer, the other is the reader. Start both VIs and start all 8 reader loops. Then you can consecutive
ly click on all 8 sender loops. Doing this with and without multiple NICs enabled should show you the problem.
Note: I think the issue I was talking about in earlier posts about getting multiple strings back before it wrote out "Loop" was due to the fact that the writes were not occurring quickly enough and the reads were happening multiple times. Therefore, in these VIs, I revised the read and close timeouts to -1.
I think it would be best if you could call me so we can discuss this issue. If you can email me, I will send you my contact information if you don't already have access to it.
Attachments:
ReadSocket_Multiple_MSHv1.vi ‏360 KB
WriteSocket_Multiple_MSHv1.vi ‏216 KB

WOL question. SCCM server with multiple nics.

Hi,
I have a sccm server with multiple nics, I can wake up any machine using a 3ed party magic packet utility, if I set a schedule and use sccm wol functionally the machine never wakes up. As I pointed out my server has multiple nics, does anyone have a sccm
server with multiple nics with sccm built in wol functionally working?. I am curious on how you achieved this.

Hey Garth,
Yes the problem is solved but we had to buy a 3rd party power management utility to accomplish WOL. Because we have many different subnets in our environment we found that this was the fastest way to get WOL working,
So out of the box SCCM would not work for us, with a 3rd party utility that had an SCCM plugin WOL now works flawlessly.

TS1368 I can't connect to the iTunes store with my Apple TV. I can see what movies are on offer but when trying to access my account i am advised "Can't connect to server" (times out).

I can't connect to the iTunes store with my Apple TV. I can see what movies are on offer but when trying to access my account i am advised "Can't connect to server" (times out).

I have the same problem with my 3rd gen Apple TV. I can preview iTunes movies, stream from my Mac, Airplay from my other devices but I cannot rent a movie on iTunes. Every time I try I get "Can't connect to ITunes" and "Unable to sign in". Had technical support review the problem over the phone and they agreed to send me a new one. Same problem. Interestingly enough my 2nd gen Apple TV works just fine.

IF YOU CAN'T CONNECT TO THE MUSIC STORE WITH ITUNS5.0.1

IF YOU CAN'T CONNECT TO THE MUSIC STORE WITH ITUNES5.0.1 TYR GOING TO THE DOWNLOAD SECTION ABOVE GO TO PAGE 2 AND DOWNLOAD BONJOUR AS A STANDALONE IT WORKED FOR ME. BEFORE NOW ALL I GOT WAS NETWORK HAD TIMED OUT.AFTER I DOWNLOADED BONJOUR IT WORKS FINE NOW SEE IF THIS HELPS ANYBODY ELSE.

What kind of advise is this, call up Nokia Contact Centre? They can not fix the most simplest problem and the customer service just lacks big time. I spent 3 days trying to get my OVI Music fixed! The best is they don't know what they hell is going on. I even explained in so much detail what is happening with my account and all they recommend is try logging in after 30mins - 1 hour (what on earth do they do at their end just press some keyboard buttons like they doing something?)
The most common thing I would have done is (if I was a Nokia employee) contact the relevant team and tell them majority users still can not login and they tried but still failed to login and then escalate the problem with them and make sure this issue gets seen to and promptly fixed but nooooo we got lazy and crazy employee here too just like the customer service it just shows the whole team is one shattered company falling to bits bit by bit unless they get their act sorted and help the customers, which makes the difference!!!

I can't connect to the app store with my iPad

I can't connect to the App Store with my iPad. The App Store icon is displaying 3 updates available but when I click on the icon I can't connect.

HaiTan --
We're all other Apple customers here, helping each find solutions. So we can't fix it.
But try again tomorrow. All Apple servers are undergoing a huge number of hits. I think tomorrow or even the next day, all upgrade, update, and activation servers will be in better shape, as well as the App Store.
Any time millions of people want to do exactly the same thing online, there's always trouble, LOL.

How create data store with PermSize = 4096MB on HP-UX 64-bit?

Hi!
I use TimesTen 7.0.2:
TimesTen Release 7.0.2.0.0 (64 bit HPUX/IPF) (tt70_1:17001) 2007-05-02T05:22:15Z
Instance admin: root
Instance home directory: /opt/TimesTen/tt70_1
Daemon home directory: /var/TimesTen/tt70_1
Access control enabled.
I set PermSize = 4096MB for my new data store. Then I tryid to create it:
ttIsql -connStr "DSN=tt_rddb1;UID=ttsys;PWD=ttsys;OraclePWD=ttsys;Overwrite=1" -e "exit;"
But operation was failed:
836: Cannot create data store shared-memory segment, error 22.
Can I create data store with such size on HP-UX 64-bit???

Is largefiles enabled? I believe you can check with fsadm -F vxfs /filesystem
Also please understand that 'PermSize' is not the only attribute affecting the size of the timesten shared memory segment. The actual resulting size is
PermSize + TempSize + LogBuffSize + Overhead
So you would need to configure shmmax to be > 4g. Have you tried setting it to (say) 8g (just for testing purposes to see if it eliminates the error).

Connect to a data server with topology manager

Hi! I am new to ODI...
I've created a master and work repository. Now I'm in topology manager to create a data server from Physical Architecture. I succeed in connecting to this data server with "Oracle Toad" using a service name...so I select JDBC driver and then I insert jdbc:oracle:oci8:@<tns_alias> (with the right service name).
Then it give me the message that it can connect to the data server, but when i click ok, it says me:
{color:#ff0000}java.lang.UnsatisfiedLinkError: no ocijdbc10 in java.library.path
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at oracle.jdbc.driver.T2CConnection.loadNativeLibrary(T2CConnection.java:3013)
at oracle.jdbc.driver.T2CConnection.logon(T2CConnection.java:228)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:361)
at oracle.jdbc.driver.T2CConnection.<init>(T2CConnection.java:142)
at oracle.jdbc.driver.T2CDriverExtension.getConnection(T2CDriverExtension.java:79)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:595)
at com.sunopsis.sql.SnpsConnection.u(SnpsConnection.java)
at com.sunopsis.sql.SnpsConnection.a(SnpsConnection.java)
at com.sunopsis.sql.SnpsConnection.testConnection(SnpsConnection.java)
at com.sunopsis.sql.SnpsConnection.testConnection(SnpsConnection.java)
at com.sunopsis.graphical.frame.b.jz.dP(jz.java)
at com.sunopsis.graphical.frame.b.jz.bD(jz.java)
at com.sunopsis.graphical.frame.bo.bz(bo.java)
at com.sunopsis.graphical.frame.b.jz.em(jz.java)
at com.sunopsis.graphical.frame.b.jz.<init>(jz.java)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at com.sunopsis.graphical.frame.bb.b(bb.java)
at com.sunopsis.graphical.tools.utils.swingworker.v.call(v.java)
at edu.emory.mathcs.backport.java.util.concurrent.FutureTask.run(FutureTask.java:176)
at com.sunopsis.graphical.tools.utils.swingworker.l.run(l.java)
at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:665)
at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:690)
at java.lang.Thread.run(Unknown Source)
{color}
My environment variable for Oracle are:
C:\oracle\ora92\bin;C:\Programmi\Oracle\jre\1.3.1\bin;
I succeed in connecting with OCI using Toad...why can't I connect with ODI? Need I to install another component? (and which?)
Sorry for my english...please help me! thanks....
Alessia
Edited by: user1762560 on 26-feb-2009 9.06

jdbc:oracle:oci8:@tns_alias
it doesn't contain the sign '< ' or '>'

Tip for Data Merge with Multiple Records (labels, etc.)

I have seen many InDesign Data Merge questions about how to create sheets of mailing labels, especially the problem of getting only one label per page, when you need 30 or more.
Adobe's instructions are poor and incomplete in that InDesign doesn't step out the records from a data source - it steps out the FRAMES that contain the data field placeholders.
That is why you only need to place a text or image frame once on a single page - during the datamerge, InDesign will create the additional FRAMES for each record, and it will create the pages required to hold them.
You do have to set the desired spacing on the
If you create the frame on a Master page, ID allows you to update the data source (when it changes) in the Data Merge tool panel.
These are very nice and robust features, but the documentation for them is confusing to many people.
You will find more great in-depth help for Data Merge, with screen captures and attachments, here in the forum.

For a multiple record merge you need one set of placeholders, then set the margins and spacing in the merge options so the positioning is correct.
Warning: Using Preview in a multiple record merge will corrupt the file. If you press the preview button, Undo after looking at the preview, then merge without using preview.

Error connecting integrator and record store with fetching the metadata

I am trying to fetch crawled data from record store in integrator and then upload them in a data domain. I am encountering an error regarding the connection between integrator and record store (error while generating metadata), It says "Exception encountered connecting to the record store and writing the metadata with the following message: Transport error: 404 error: Not Found". Please suggest the required action.

I found a installer for Quicktime that was not connected to iTunes and installed quicktime again.
Everything is now working.

Vm with multiple nic

Most of the time I only add a second vNIC to multi-hone the VM so it can connect to two different subnets (i.e. one vNIC for backup traffic connected to a different vSwitch with different physical uplink than all connections for production VM traffic).
As Rod said, it may prove more beneficial to only have one vNIC unless you somehow have so much traffic that the one vNIC is overloaded. What version of VMWare are you running?

We have a switch with multiple vmmic (five), Is there any advantages os using multiple nic for vm to improve network performance ?
This topic first appeared in the Spiceworks Community

Data Set with multiple ref cursors

Hi ,
I need to design an integrated report , i created my data set with a oracle procedure which returns "multiple ref cursors" . In this case birt is displaying all output columns together and it is difficult to identify which column belongs to which ref cursor and if there are any columns with same name in both output cursors , it displays only one. Is there any way to handle this ? or how we handle a data set which contains multiple ref cursors in output ??

Having to ref cursors return mutiple recordsets in an Oracle package is like haveng two resultsets return from a MS SQL Server sparc.
The link may point you in the right direction.
http://www.codeproject.com/Articles/675933/Returning-Multiple-Result-Sets-from-an-Entity-Fram

Data binding with Multiple Filter

Hi Experts,
I am trying to do the data binding using filters with multiple values.
ex: I am selecting the multiple values from list dialog and those i want to pass to odata service as a filters.
name : abc
               pqr
I am looping on above and pushing it to array of filters.
     jQuery.sap.require("sap.ui.model.FilterOperator");
     var FilterOperator = sap.ui.model.FilterOperator;
     var filtersTerr = new Array();
   for(i=0;i<name.length;i++){
filterName = new sap.ui.model.Filter("FirstName", sap.ui.model.FilterOperator.EQ, name[i]);
filter.push(filterName );
this..getBinding("items").filter([filter],false);
Final filter should be something $filter=FirstName='abc' or FirstName='pqr'.
I have already looked into below discussions but somehow came to conclusion that array cannot be use with OR/AND.
Odata Filter with OR
http://scn.sap.com/thread/3462246
http://scn.sap.com/thread/3560814
Please let me know how this needs to be written.
Thanks,
Rahul

Hi Rahul
There are many ways.
Filter for table
var sRlUrl = "http://<host Name>/sap/opu/odata/sap/ZTWMP" ;
var list = new sap.ui.model.odata.ODataModel( sRlUrl, false, "username", "pswd");
list.setDefaultBindingMode(sap.ui.model.BindingMode.TwoWay);
var iv_proID = sap.ui.getCore().getElementById('input1').getValue();
var iv_listNo = sap.ui.getCore().getElementById('input2').getValue();
var iv_Matnr = sap.ui.getCore().getElementById('input3').getValue();
var iv_Po     = sap.ui.getCore().getElementById('input4').getValue();
//... Set any Filters .. if reqd'
var oFilter = new Array();
var iCount = 0;
if (iv_proID) {
oFilter[iCount] = new sap.ui.model.Filter("abc", sap.ui.model.FilterOperator.EQ, sap.ui.getCore().getElementById('input1').getValue());
iCount++;
if (iv_listNo){
oFilter[iCount] = new sap.ui.model.Filter("def", sap.ui.model.FilterOperator.EQ, sap.ui.getCore().getElementById('input2').getValue());
iCount++;
oFilter[iCount] = new sap.ui.model.Filter("PcTotal", sap.ui.model.FilterOperator.EQ,"HEADER" );
iCount++;
sap.ui.getCore().getElementById('T-POhdr-DR').setModel(list);
//... Bind Rows with oData, with filters if any
sap.ui.getCore().getElementById('T-POhdr-DR').bindRows({
path: '/t_entity set/',
filters: oFilter
2 General filter
OData.read({ requestUri: "http://<URL>:8001/sap/opu/odata/sap/ZTMP_ABC/Item?$filter=ID eq '"+ID+"' and DESC eq '"+Desc+"'", headers: { Accept: "application/json" } }, function (data, response) {
if (data.results[0]) {
                 sap.ui.getCore().byId("oInput2").setText(data.results[0].<odata field to assign>;

Connecting to AOP data store with multiple NIC's

Similar Messages

Maybe you are looking for