Connecting to Database as INTERNAL
Hi, I have a problem connecting to database as INTERNAL. I'm getting "ORA-12203: TNS unable to connect to destination" message when trying to connect to the database.
Please suggest me how to connect. And what are important tasks that can be done by connecting like that.
Thank You.......
Hi,
oerr is your friend:12203, 00000, "TNS:unable to connect to destination"
// *Cause: Invalid TNS address supplied or destination is not listening.
// This error can also occur because of underlying network transport
// problems.
// *Action: Verify that the service name you entered on the command line
// was correct. Ensure that the listener is running at the remote node and
// that the ADDRESS parameters specified in TNSNAMES.ORA are correct.
// Finally, check that all Interchanges needed to make the connection are
// up and running.
And what are important tasks that can be done by connecting like that.Migrate to a supported release (9i, 10g), because 8i is out of support.
Regards,
Yoann.
Similar Messages
-
No connect to database possible while logging in sap system
hi to all experts ,
all the work process are wait state but with one work process i have error 1 and when im trying to logon to sap im getting this message no connect to database possible session terminated
dev_disp
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid EC6
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 75
intno 20050900
make: multithreaded, Unicode, optimized
pid 3664
Thu Jul 10 00:06:23 2008
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3664) [dpxxdisp.c 1237]
shared lib "dw_xml.dll" version 75 successfully loaded
shared lib "dw_xtc.dll" version 75 successfully loaded
shared lib "dw_stl.dll" version 75 successfully loaded
shared lib "dw_gui.dll" version 75 successfully loaded
shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Thu Jul 10 00:06:28 2008
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >gcecc6_EC6_00 <
DpShMCreate: sizeof(wp_adm) 18304 (1408)
DpShMCreate: sizeof(tm_adm) 3994272 (19872)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1440)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05FF0040, size: 4653368)
DpShMCreate: allocated sys_adm at 05FF0040
DpShMCreate: allocated wp_adm at 05FF1E40
DpShMCreate: allocated tm_adm_list at 05FF65C0
DpShMCreate: allocated tm_adm at 05FF65F0
DpShMCreate: allocated wp_ca_adm at 063C5890
DpShMCreate: allocated appc_ca_adm at 063CB650
DpShMCreate: allocated comm_adm at 063CD590
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0644E450
DpShMCreate: allocated gw_adm at 0644E490
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0644E4C0
DpShMCreate: allocated wall_adm at 0644E4C8
MBUF state OFF
DpCommInitTable: init table for 500 entries
Thu Jul 10 00:06:29 2008
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 1712
argv[0] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[1] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2122
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=EC6
argv[7] = -DSAPMYNAME=gcecc6_EC6_00
argv[8] = -DSAPPROFILE=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1623]
***LOG Q0K=> DpMsAttach, mscon ( gcecc6) [dpxxdisp.c 11586]
DpStartStopMsg: send start message (myname is >gcecc6_EC6_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 75
Release check o.K.
Thu Jul 10 00:06:30 2008
DpJ2eeLogin: j2ee state = CONNECTED
Thu Jul 10 00:06:43 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
*** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1524
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:2124) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=1712)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Jul 10 00:07:09 2008
J2EE server info
start = TRUE
state = STARTED
pid = 5372
argv[0] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[1] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2191
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=EC6
argv[7] = -DSAPMYNAME=gcecc6_EC6_00
argv[8] = -DSAPPROFILE=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Thu Jul 10 00:07:12 2008
MBUF state ACTIVE
Thu Jul 10 00:07:15 2008
DpModState: change server state from STARTING to ACTIVE
Thu Jul 10 00:08:09 2008
*** ERROR => W8 (pid 2248) died [dpxxdisp.c 14241]
Thu Jul 10 00:08:35 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
*** ERROR => NiIRead: SiRecv failed for hdl 6 / sock 1484
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:2192) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=5372)
*** ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Jul 10 00:08:49 2008
J2EE server info
start = TRUE
state = STARTED
pid = 1960
argv[0] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[1] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2252
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=EC6
argv[7] = -DSAPMYNAME=gcecc6_EC6_00
argv[8] = -DSAPPROFILE=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Thu Jul 10 00:09:44 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
*** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1572
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:2255) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=1960)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Jul 10 00:09:49 2008
J2EE server info
start = TRUE
state = STARTED
pid = 4832
argv[0] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[1] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2302
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=EC6
argv[7] = -DSAPMYNAME=gcecc6_EC6_00
argv[8] = -DSAPPROFILE=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Thu Jul 10 00:09:55 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
*** ERROR => NiIRead: SiRecv failed for hdl 6 / sock 1472
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:2303) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=4832)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Jul 10 00:10:09 2008
J2EE server info
start = TRUE
state = STARTED
pid = 2124
argv[0] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[1] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2381
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=EC6
argv[7] = -DSAPMYNAME=gcecc6_EC6_00
argv[8] = -DSAPPROFILE=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Thu Jul 10 00:10:14 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
*** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1468
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:2382) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2124)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Jul 10 00:10:29 2008
J2EE server info
start = TRUE
state = STARTED
pid = 4180
argv[0] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[1] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2414
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=EC6
argv[7] = -DSAPMYNAME=gcecc6_EC6_00
argv[8] = -DSAPPROFILE=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Thu Jul 10 00:10:34 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
*** ERROR => NiIRead: SiRecv failed for hdl 6 / sock 1464
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:2415) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=4180)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Jul 10 00:10:49 2008
J2EE server info
start = TRUE
state = STARTED
pid = 6436
argv[0] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[1] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2439
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=EC6
argv[7] = -DSAPMYNAME=gcecc6_EC6_00
argv[8] = -DSAPPROFILE=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Thu Jul 10 00:10:50 2008
DpJ2eeLogin: j2ee state = CONNECTED
Thu Jul 10 00:10:54 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
*** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1460
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:2445) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=6436)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Jul 10 00:11:09 2008
J2EE server info
start = TRUE
state = STARTED
pid = 7244
argv[0] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[1] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2491
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=EC6
argv[7] = -DSAPMYNAME=gcecc6_EC6_00
argv[8] = -DSAPPROFILE=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Thu Jul 10 00:11:14 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
*** ERROR => NiIRead: SiRecv failed for hdl 6 / sock 1456
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:2492) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=7244)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Jul 10 00:11:29 2008
J2EE server info
start = TRUE
state = STARTED
pid = 7560
argv[0] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[1] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2512
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=EC6
argv[7] = -DSAPMYNAME=gcecc6_EC6_00
argv[8] = -DSAPPROFILE=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Thu Jul 10 00:11:34 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
*** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1452
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:2513) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=7560)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Jul 10 00:11:49 2008
J2EE server info
start = TRUE
state = STARTED
pid = 7932
argv[0] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[1] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2539
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=EC6
argv[7] = -DSAPMYNAME=gcecc6_EC6_00
argv[8] = -DSAPPROFILE=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Thu Jul 10 00:11:50 2008
DpJ2eeLogin: j2ee state = CONNECTED
Thu Jul 10 00:11:54 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
*** ERROR => NiIRead: SiRecv failed for hdl 6 / sock 1456
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:2545) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=7932)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Jul 10 00:12:09 2008
DpEnvCheckJ2ee: switch off j2ee start flag
DEV_W0
trc file: "dev_w0", trc level: 1, release: "700"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
B
B Thu Jul 10 00:06:30 2008
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\EC6\DVEBMGS00\exe\dboraslib.dll' ...
B Library 'C:\usr\sap\EC6\DVEBMGS00\exe\dboraslib.dll' loaded
B Version of 'C:\usr\sap\EC6\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.73)
B New connection 0 created
M sysno 00
M sid EC6
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 75
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 1416
M
M kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1416) [dpxxdisp.c 1299]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 18304 (1408)
M DpShMCreate: sizeof(tm_adm) 3994272 (19872)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1440)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05FF0040, size: 4653368)
M DpShMCreate: allocated sys_adm at 05FF0040
M DpShMCreate: allocated wp_adm at 05FF1E40
M DpShMCreate: allocated tm_adm_list at 05FF65C0
M DpShMCreate: allocated tm_adm at 05FF65F0
M DpShMCreate: allocated wp_ca_adm at 063C5890
M DpShMCreate: allocated appc_ca_adm at 063CB650
M DpShMCreate: allocated comm_adm at 063CD590
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 0644E450
M DpShMCreate: allocated gw_adm at 0644E490
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0644E4C0
M DpShMCreate: allocated wall_adm at 0644E4C8
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host gcecc6
M
M Thu Jul 10 00:06:34 2008
M calling db_connect ...
C Prepending C:\usr\sap\EC6\DVEBMGS00\exe to Path.
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C
C Thu Jul 10 00:06:48 2008
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=05CAECF8)
C Now '/@EC6' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=05C8C6D8,usrhp=05CAECF8)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=05CAECF8)
C Now 'SAPSR3/<pwd>@EC6' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C Database instance EC6 is running on GCECC6 with ORACLE version 10.2.0.2.0 since 20080710
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20080710 000634 GCECC6
M db_connect o.k.
M ICT: exclude compression: *.zip,*.cs,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.js,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif
I
I Thu Jul 10 00:07:08 2008
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0AA30040, size: 4400000)
M SHM_ROLL_AREA (addr: 788A0040, size: 61440000)
M SHM_PAGING_AREA (addr: 0AE70040, size: 32768000)
M SHM_ROLL_ADM (addr: 0CDC0040, size: 615040)
M SHM_PAGING_ADM (addr: 0CE60040, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0CEF0040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12160 bytes (50 server) at 06660040
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 13, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 12B700C8, size: 30000000, end: 1480C448)
B dbtbxbuf: Buffer TABLP (addr: 148100C8, size: 10240000, end: 151D40C8)
B
B Thu Jul 10 00:07:09 2008
B dbexpbuf: Buffer EIBUF (addr: 151E00D0, size: 4194304, end: 155E00D0)
B dbexpbuf: Buffer ESM (addr: 155F00D0, size: 4194304, end: 159F00D0)
B dbexpbuf: Buffer CUA (addr: 15A000D0, size: 3072000, end: 15CEE0D0)
B dbexpbuf: Buffer OTR (addr: 15CF00D0, size: 4194304, end: 160F00D0)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S
S Thu Jul 10 00:07:10 2008
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 1B3D3950
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 1F6300A8
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 1F630430
S using messages for server info
S size of spec char cache entry: 297028 bytes (timeout 100 sec)
S size of open spool request entry: 2132 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A ---PXA-------------------------------------------
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 5132kb, dir_size: 5076kb.
A Attached to PXA (address 688A0040, size 150000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A ---PXA-------------------------------------------
A
A
A Thu Jul 10 00:07:11 2008
A ABAP ShmAdm attached (addr=57A1C000 leng=20955136 end=58E18000)
A >> Shm MMADM area (addr=57E91E58 leng=126176 end=57EB0B38)
A >> Shm MMDAT area (addr=57EB1000 leng=16150528 end=58E18000)
A RFC Destination> destination gcecc6_EC6_00 host gcecc6 system EC6 systnr 0 (gcecc6_EC6_00)
A RFC Options> H=gcecc6,S=00,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 13730 bytes at 06680040
M ThVBStartUp: restart pending update requests
B dbtran INFO (init_connection '<DEFAULT>' [ORACLE:700.08]):
B max_blocking_factor = 5, max_in_blocking_factor = 5,
B min_blocking_factor = 5, min_in_blocking_factor = 5,
B prefer_union_all = 0, prefer_join = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 1, opt GE LE to BETWEEN = 0,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
M ThVBAutoStart: update-auto-delete
N SsfSapSecin: putenv(SECUDIR=C:\usr\sap\EC6\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is C:\usr\sap\EC6\DVEBMGS00\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 700, [7000.0.75.20050900]
W ITS Plugin: Int.version, [32]
W ITS Plugin: Feature set: [10]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume gcecc6_EC6_00
E
E Thu Jul 10 00:07:12 2008
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M MBUF info for hooks: MS component UP
M ThSetEnqName: set enqname by server list
M ThISetEnqname: enq name = >gcecc6_EC6_00 <
E
E *************** EnqId_EN_ActionAtMsUpHook ***************
E Hook on upcoming Ms (with EnqSrv), get auth EnqId and check it locally
E
E *************** ObjShMem_CheckAuthoritativeEnqId ***************
E Checking authoritative EnqId from EnqSrv into ObjShMem
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime = -999
E EnqId.RandomNumber = -999
E ReqOrd.TimeInSecs = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime = -999
E EnqId.RandomNumber = -999
E ReqOrd.TimeInSecs = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: EnqId is initial in ShMem
E ObjShMem_CheckAuthoritativeEnqId: Overwrite incoming auth EnqId, continue
E EnqId inscribed into initial ObjShMem: (ObjShMem_CheckAuthoritativeEnqId)
E ---SHMEM--------------------------------------------------------------------------------
E EnqId: EnqTabCreaTime/RandomNumber = 10.07.2008 00:07:11 1215628631 / 2560
E ReqOrd at Srv: TimeInSecs/ReqNumberThisSec = 10.07.2008 00:07:12 1215628632 / 1
E ReqOrd at Cli: TimeInSecs/ReqNumberThisSec = 10.07.2008 00:07:12 1215628632 / 1
E Status: STATUS_OK
E ----------------------------------------------------------------------------------------
M
M Thu Jul 10 00:07:15 2008
M ThActivateServer: state = STARTING
L BtcSysStartRaise: Begin
L Raise event SAP_SYSTEM_START with parameter <gcecc6_EC6_00 >
L BtcSysStartRaise: End
M
M Thu Jul 10 00:07:32 2008
M SecAudit(RsauShmInit): WP attached to existing shared memory.
M SecAudit(RsauShmInit): addr of SCSA........... = 05FC0040
M SecAudit(RsauShmInit): addr of RSAUSHM........ = 05FC07A8
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 05FC07E0
M SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 05FC07EC
C
C Thu Jul 10 00:08:19 2008
C *** ERROR => ORA-3113 occurred when executing SQL statement (parse error offset=0)
[dbsloci.c 12548]
C sc_p=05BDE198,no=48,idc_p=00000000,con=0,act=1,slen=97,smax=256,#vars=0,stmt=1FA374E8,table=V$LOG
C SELECT SUBSTR ( TO_CHAR ( SEQUENCE#-1, '0999999999' ), 4, 8 ) FROM V$LOG WHERE STATUS = 'CURRENT';
C sc_p=05BDE198,no=48,idc_p=00000000,con=0,act=1,slen=97,smax=256,#vars=0,stmt=1FA374E8,table=V$LOG
C prep=0,lit=0,nsql=1,lobret=0,#exec=1,dbcnt=0,upsh_p=00000000,ocistmth_p=1FA30364
C IN : cols=0,rmax=0,xcnt=0,rpc=0,rowi=0,rtot=0,upto=-1,rsize=0,vmax=0,bound=0,iobuf_p=00000000,vda_p=00000000
C lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C OUT: cols=1,rmax=3611,xcnt=3611,rpc=0,rowi=0,rtot=0,upto=-1,rsize=16,vmax=32,bound=1,iobuf_p=1B38F7E8,vda_p=1FA37758
C lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C SELECT SUBSTR ( TO_CHAR ( SEQUENCE#-1, '0999999999' ), 4, 8 ) FROM V$LOG WHERE STATUS = 'CURRENT';
B ***LOG BY2=> sql error 3113 performing FET [dbds#1 @ 592] [dbds 0592 ]
B ***LOG BY0=> ORA-03113: end-of-file on communication channel [dbds#1 @ 592] [dbds 0592 ]
C *** ERROR => ORA-3114 occurred when executing SQL statement (parse error offset=0)
[dbsloci.c 12548]
C sc_p=05BDD3AC,no=15,idc_p=05BEDB84,con=0,act=1,slen=184,smax=256,#vars=3,stmt=1B5332C8,table=REPOLOAD
C SELECT "UNAM" , "UDAT" , "UTIME" , "L_DATALG" , "Q_DATALG" , "SDAT" , "STIME" , "MINOR_VERS" , "MAJO\
C R_VERS" FROM "REPOLOAD" WHERE "PROGNAME" = :A0 AND "R3STATE" = :A1 AND "MACH" = :A2 ;
C sc_p=05BDD3AC,no=15,idc_p=05BEDB84,con=0,act=1,slen=184,smax=256,#vars=3,stmt=1B5332C8,table=REPOLOAD
C prep=0,lit=0,nsql=0,lobret=0,#exec=23,dbcnt=0,upsh_p=00000000,ocistmth_p=1B525E94
C IN : cols=3,rmax=1,xcnt=0,rpc=0,rowi=0,rtot=0,upto=-1,rsize=86,vmax=32,bound=1,iobuf_p=05A2E748,vda_p=1B5345E8
C lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C OUT: cols=9,rmax=1,xcnt=1,rpc=1,rowi=0,rtot=1,upto=-1,rsize=96,vmax=32,bound=1,iobuf_p=1B38F7E8,vda_p=1B534A58
C lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C SELECT "UNAM" , "UDAT" , "UTIME" , "L_DATALG" , "Q_DATALG" , "SDAT" , "STIME" , "MINOR_VERS" , "MAJO\
C R_VERS" FROM "REPOLOAD" WHERE "PROGNAME" = :A0 AND "R3STATE" = :A1 AND "MACH" = :A2 ;
B ***LOG BYM=> severe DB error 3114 ; work process in reconnect status [dbsh#2 @ 1123] [dbsh 1123 ]
B ***LOG BY4=> sql error 3114 performing SEL on table REPOLOAD [dbrepo#4 @ 2656] [dbrepo 2656 ]
B ***LOG BY0=> ORA-03114: not connected to ORACLE [dbrepo#4 @ 2656] [dbrepo 2656 ]
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
M ***LOG R68=> ThIRollBack, roll back () [thxxhead.c 13155]
C *** ERROR => OCI-call 'OCITransRollback' failed: rc = 3114
[dboci.c 3003]
B ***LOG BYM=> severe DB error 3114 ; work process in reconnect status [dbsh#2 @ 1123] [dbsh 1123 ]
B Reconnect state is entered by connection:
B 0: name = R/3, con_id = 000000000 state = ACTIVE , perm = YES, reco = YES, timeout = 000, con_max = 255, con_opt = 255, occ = NO
B hdl_error_on_commit_rollback: DB-ROLLBACK detected RECONNECT state
M ThShortCommit: db unusable
B RECONNECT: rsdb/reco_trials: 3
B RECONNECT: rsdb/reco_sleep_time: 5
B RECONNECT: rsdb/reco_sync_all_server: OFF
B db_con_reconnect disconnecting connection:
B 0: name = R/3, con_id = 000000000 state = INACTIVE , perm = YES, reco = YES, timeout = 000, con_max = 255, con_opt = 255, occ = NO
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=05C8C6D8,usrhp=05CAECF8)
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C Now I'm disconnected from ORACLE
B db_con_reconnect performing the reconnect for con:
B 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = YES, timeout = 000, con_max = 255, con_opt = 255, occ = NO
C Client NLS settings:
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C
C Thu Jul 10 00:09:42 2008
C *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12518
[dboci.c 4172]
C *** ERROR => CONNECT failed with sql error '12518'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C
C Thu Jul 10 00:09:47 2008
C Client NLS settings:
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C
C Thu Jul 10 00:09:52 2008
C Client NLS settings:
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
B Reconnect failed for connection:
B 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = YES, timeout = 000, con_max = 255, con_opt = 255, occ = NO
M *** WARNING => PfStatWrite: missing STAT_END for opcode STAT_REPLOAD [pfxxstat.c 4103]
B db_con_reconnect disconnecting connection:
B 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = YES, timeout = 000, con_max = 255, con_opt = 255, occ = NO
B db_con_reconnect performing the reconnect for con:
B 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = YES, timeout = 000, con_max = 255, con_opt = 255, occ = NO
C Client NLS settings:
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C
C Thu Jul 10 00:09:53 2008
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C
C Thu Jul 10 00:09:58 2008
C Client NLS settings:
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C
C Thu Jul 10 00:10:03 2008
C Client NLS settings:
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
B Reconnect failed for connection:
B 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = YES, timeout = 000, con_max = 255, con_opt = 255, occ = NO
M *** ERROR => ThHdlReconnect: db_reconnect failed (2048) [thxxhead.c 16655]
B db_con_reconnect disconnecting connection:
B 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = YES, timeout = 000, con_max = 255, con_opt = 255, occ = NO
B db_con_reconnect performing the reconnect for con:
B 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = YES, timeout = 000, con_max = 255, con_opt = 255, occ = NO
C Client NLS settings:
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C
C Thu Jul 10 00:10:08 2008
C Client NLS settings:
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C
C Thu Jul 10 00:10:13 2008
C Client NLS settings:
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C
C Thu Jul 10 00:10:14 2008
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
B Reconnect failed for connection:
B 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = YES, timeout = 000, con_max = 255, con_opt = 255, occ = NO
M *** ERROR => ThHdlReconnect: db_reconnect failed (2048) [thxxhead.c 16655]
B
B Thu Jul 10 00:10:29 2008
B db_con_reconnect disconnecting connection:
B 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = YES, timeout = 000, con_max = 255, con_opt = 255, occ = NO
B db_con_reconnect performing the reconnect for con:
B 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = YES, timeout = 000, con_max = 255, con_opt = 255, occ = NO
C Client NLS settings:
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C
C Thu Jul 10 00:10:30 2008
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C
C Thu Jul 10 00:10:35 2008
C Client NLS settings:
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C
C Thu Jul 10 00:10:40 2008
C Client NLS settings:
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
B Reconnect failed for connection:
B 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = YES, timeout = 000, con_max = 255, con_opt = 255, occ = NO
M *** ERROR => ThHdlReconnect: db_reconnect failed (2048) [thxxhead.c 16655]
B db_con_reconnect disconnecting connection:
B 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = YES, timeout = 000, con_max = 255, con_opt = 255, occ = NO
B db_con_reconnect performing the reconnect for con:
B 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = YES, timeout = 000, con_max = 255, con_opt = 255, occ = NO
C Client NLS settings:
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C
C Thu Jul 10 00:10:41 2008
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C
C Thu Jul 10 00:10:46 2008
C Client NLS settings:
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C
C Thu Jul 10 00:10:51 2008
C Client NLS settings:
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
B Reconnect failed for connection:
B 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = YES, timeout = 000, con_max = 255, con_opt = 255, occ = NO
M *** ERROR => ThHdlReconnect: db_reconnect failed (2048) [thxxhead.c 16655]
B
B Thu Jul 10 00:11:29 2008
B db_con_reconnect disconnecting connection:
B 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = YES, timeout = 000, con_max = 255, con_opt = 255, occ = NO
B db_con_reconnect performing the reconnect for con:
B 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = YES, timeout = 000, con_max = 255, con_opt = 255, occ = NO
C Client NLS settings:
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C
C Thu Jul 10 00:11:30 2008
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=1F8E7360)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c 4391]
C Detaching from DB Server (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C87968 05C8CF04 05C8C78C
C Attaching to DB Server EC6 (con_hdl=0,svchp=05C8C6D8,svrhp=05C9C464)
C Starting user session (con_hdl=0,svchp=05C8C6D8,srvhp=05C9C464,usrhp=14 ETW000 r3trans version 6.14 (release 700 - 18.09.06 - 09:35:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 10.07.2008 - 01:06:33
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Thu Jul 10 01:06:36 2008 7795 0.007795
4 ETW000 [dev trc ,00000] db_con_init called 23 0.007818
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 33 0.007851
4 ETW000 [dev trc ,00000] Loading DB library 'dboraslib.dll' ... 28 0.007879
4 ETW000 [dev trc ,00000] load shared library (dboraslib.dll), hdl 0 26757 0.034636
4 ETW000 [dev trc ,00000] using "C:\usr\sap\EC6\SYS\exe\uc\NTI386\dboraslib.dll"
4 ETW000 32 0.034668
4 ETW000 [dev trc ,00000] Library 'dboraslib.dll' loaded 12 0.034680
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dboraslib.dll
4 ETW000 19 0.034699
4 ETW000 [dev trc ,00000] Version of 'dboraslib.dll' is "700.08", patchlevel (0.73)
4 ETW000 17051 0.051750
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dboraslib.dll
4 ETW000 22 0.051772
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dboraslib.dll
4 ETW000 25 0.051797
4 ETW000 [dev trc ,00000] New connection 0 created 21 0.051818
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 28 0.051846
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 18 0.051864
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 18 0.051882
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 24 0.051906
4 ETW000 [dev trc ,00000] CLIENT_ORACLE_HOME is not set as environment variable or
4 ETW000 DIR_CLIENT_ORAHOME is not set as profile parameter.
4 ETW000 assuming using instant client with unspecified location.
4 ETW000 1887 0.053793
4 ETW000 [dev trc ,00000] Oracle Client Version: '10.2.0.1.0' 39929 0.093722
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 29 0.093751
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8 2402 0.096153
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPSR3's password 30 0.096183
4 ETW000 [dev trc ,00000] Connecting as /@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
4 ETW000 25 0.096208
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 575 0.096783
4 ETW000 [dev trc ,00000] 0 UTF8 1 0243DD48 0244327C 02442B04
4 ETW000 116 0.096899
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 9004 0.105903
4 ETW000 [dev trc ,00000] Allocating server context handle 18 0.105921
4 ETW000 [dev trc ,00000] Attaching to DB Server EC6 (con_hdl=0,svchp=02442A50,svrhp=024542C4)
4 ETW000 45 0.105966
4 ETW000 [dev trc ,00000] Thu Jul 10 01:07:47 2008 71710744 71.816710
4 ETW000 [dev trc ,00000] Assigning server context 024542C4 to service context 02442A50
4 ETW000 48 71.816758
4 ETW000 [dev trc ,00000] Allocating user session handle 53 71.816811
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=02442A50,srvhp=024542C4,usrhp=0248F930)
4 ETW000 55 71.816866
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
4 ETW000 38748 71.855614
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=1,svrhp=024542C4) 15 71.855629
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=02442A50,srvhp=024542C4)
4 ETW000 22 71.855651
4 ETW000 [dev trc ,00000] Deallocating server context handle 024542C4 941 71.856592
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1034'
4 ETW000 56 71.856648
4 ETW000 [dev trc ,00000] Try to connect with default password 119 71.856767
4 ETW000 [dev trc ,00000] Connecting as SAPSR3/<pwd>@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
4 ETW000 21 71.856788
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 23 71.856811
4 ETW000 [dev trc ,00000] 0 UTF8 1 0243DD48 0244327C 02442B04
4 ETW000 24 71.856835
4 ETW000 [dev trc ,00000] Allocating server context handle 12 71.856847
4 ETW000 [dev trc ,00000] Attaching to DB Server EC6 (con_hdl=0,svchp=02442A50,svrhp=024542C4)
4 ETW000 36 71.856883
4 ETW000 [dev trc ,00000] Thu Jul 10 01:07:48 2008 11514 71.868397
4 ETW000 [dev trc ,00000] Assigning server context 024542C4 to service context 02442A50
4 ETW000 31 71.868428
4 ETW000 [dev trc ,00000] Assigning username to user session 0248F930 17 71.868445
4 ETW000 [dev trc ,00000] Assigning password to user session 0248F930 23 71.868468
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=02442A50,srvhp=024542C4,usrhp=0248F930)
4 ETW000 22 71.868490
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
4 ETW000 30319 71.898809
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=1,svrhp=024542C4) 15 71.898824
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=02442A50,srvhp=024542C4)
4 ETW000 31 71.898855
4 ETW000 [dev trc ,00000] Deallocating server context handle 024542C4 927 71.899782
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1034'
4 ETW000 41 71.899823
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error 1034 performing CON [dblink#3 @ 431]
4 ETW000 7115 71.906938
4 ETW000 [dblink ,00431] ***LOG BY0=>ORA-01034: ORACLE not available 20 71.906958
4 ETW000 ORA-27101: shared memory realm does not exist [dblink#3 @ 431]
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'EC6'"
Edited by: moazam hai on Jul 9, 2008 9:40 PM -
Connect to database failed,rc=-10709 Connection failed (RTE:Database name)
Hi gurues, I'm facing this issue with an IDES on MaxDB with Windows.
System was up and running until someone tries to make an upgrade of the kernel. Since then we can not start our system. we tried to rollback kernel release to the previous one but it didn't work.
When we start our system from MMC console we can see all process in green but work processes are in RUN state and after a few minutes they goes down with the following error
trc file: "dev_w0", trc level: 1, release: "701"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Mon May 16 23:57:31 2011
B create_con (con_name=R/3)
B Loading DB library '
sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' ...
B Library '
sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' loaded
B Version of '
sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' is "700.08", patchlevel (0.24)
B New connection 0 created
M sysno 00
M sid SED
M systemid 562 (PC with Windows NT)
M relno 7010
M patchlevel 0
M patchno 32
M intno 20020600
M make: multithreaded, Unicode, 64 bit, optimized
M pid 212
M
M kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 212) [dpxxdisp.c 1348]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 22784 (1752)
M DpShMCreate: sizeof(tm_adm) 5912704 (29416)
M DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000B2C0050, size: 6607136)
M DpShMCreate: allocated sys_adm at 000000000B2C0050
M DpShMCreate: allocated wp_adm at 000000000B2C2270
M DpShMCreate: allocated tm_adm_list at 000000000B2C7B70
M DpShMCreate: allocated tm_adm at 000000000B2C7BD0
M DpShMCreate: allocated wp_ca_adm at 000000000B86B450
M DpShMCreate: allocated appc_ca_adm at 000000000B871250
M DpShMCreate: allocated comm_adm at 000000000B873190
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000B8F9E20
M DpShMCreate: allocated gw_adm at 000000000B8F9EA0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000B8F9ED0
M DpShMCreate: allocated wall_adm at 000000000B8F9EE0
M
M Mon May 16 23:57:32 2011
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host sirillium1
M
M Mon May 16 23:57:33 2011
M calling db_connect ...
C
C DBSDBSLIB : version 700.08, patch 0.024 (Make PL 0.32)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.024) Default value for max. input variables is 2000 (note 655018)
C (0.024) Profile parameter to define max. input variables (note 655018)
C (0.024) Switch SQLMODE after CREATE INDEX SERIAL (note 1267841)
C (0.024) Input parameters for SQL statements increased (note 655018)
C (0.018) Create index serial for MaxDB 7.6 (note 1267841)
C (0.018) More trace in case of packed to string conversion error (note 1262799)
C (0.016) R3trans export aborts with signal 6 (note 1262245)
C (0.009) IA64 alignment errors (note 1245982)
C (0.007) Support DB-Type 'SAP DB' by UPDSTAT (note 1225668)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC SDK Version : SQLDBC.H 7.6.0 BUILD 007-123-091-175
C SQLDBC Library Version : libSQLDBC 7.6.5 BUILD 015-123-202-938
C SQLDBC client runtime is MaxDB 7.6.5.015 CL 202938
C SQLDBC supports new DECIMAL interface : 0
C SQLDBC supports VARIABLE INPUT data : 1
C SQLDBC supports keepAlive indicator : 0
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:Database name is missing))
[dbsdbsql.cpp 137]
B ***LOG BV3=> severe db error -10709 ; work process is stopped [dbsh#2 @ 1203] [dbsh 1203 ]
B ***LOG BY2=> sql error -10709 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> Connection failed (RTE:Database name is missing) [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1449]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10563]
M
M Info for wp 0
M
M pid = 212
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sirillium1_SED_00 on host sirillium1 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Mon May 16 23:57:33 2011
M * RELEASE 701
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10783
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 723]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 212) [dpnttool.c 334]
We check several entries on this SDN site, and look for a lot of notes on the marketplace, and they always are related to default user in xuser files, but our xuser list output is ok. We have a DEFAULT connection to SAPSID user, a DBM connection to CONTROL user and a USERDBA connection.
XUSER Entry 1
Key :DEFAULT
Username :SAPSID
UsernameUCS2:S.A.P.S.E.D. . . . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :SID
Nodename :server1
Sqlmode :SAPR3
Cachelimit :-1
Timeout
Isolation
Charset :<unspecified>
XUSER Entry 2
Key :c
Username :CONTROL
UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :SID
Nodename :server1
Sqlmode :INTERNAL
Cachelimit :-1
Timeout :-1
Isolation :-1
Charset :<unspecified>
XUSER Entry 3
Key :c_J2EE
Username :CONTROL
UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :SID
Nodename :server1
Sqlmode :SAPR3
Cachelimit :-1
Timeout
Isolation
Charset :<unspecified>
XUSER Entry 4
Key :w
Username :SUPERDBA
UsernameUCS2:S.U.P.E.R.D.B.A. . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :SID
Nodename :server1
Sqlmode :INTERNAL
Cachelimit :-1
Timeout :-1
Isolation :-1
Charset :<unspecified>
Any idea? we are out of ideas at this moment.
Regards
Edited by: Gustavo Goicochea on May 17, 2011 6:37 PMNatalia, this system was not resored nor copied, it was up and running before kernel update. We did some of the tests you said and someothers, here are some outputs.
We update kernel to release 142
R3trans -d and -x exit with (all with user SIDADM)
SVERS table does exist and belongs to SAPSID
dbmcli on SID>sql_execute select * from domain.tables where tablename='SVERS'
OK
END
'SAPSID';'SAPSID';'SVERS';'';'TABLE';'TABLE';'20100406';'00054637';'20100406';'00054637';'20100406';'00054638';'NO';(null);20000;(null);x'0000000000004842';'NO';'NO';'YES';'NO';(null)
Why it still says that SVERS table does not exist and SQL error 942?
C Now I'm connected to SAP DB
C 00: server1-SID, since=20110518015619, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
C *** ERROR => prepare() of C_0000, rc=1, rcSQL=-942 (POS(28) Unknown table name:SVERS) [
dbsdbsql.cpp 1604]
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(28) Unknown table name:SVERS) [dbslsdb.cpp 7253]
C sc_p=000000000CFAECC0,no=0,idc_p=0000000000000000,con=0,act=0,slen=34,smax=256,#vars=0,stmt=0000000002EA0AF0,table=SVERS
C SELECT VERSION INTO ? FROM SVERS ;
B ***LOG BZA=> table SVERS does not exist on database [dblink#4 @ 1301] [dblink 1301 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 004096) [thxxhead.c 1515]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10824]
M
Users seem to be ok
dbmcli on SID>sql_execute SELECT username, usermode FROM users
OK
END
'CONTROL';'ADMIN'
'SUPERDBA';'SYSDBA'
'SAPSID';'DBA'
'SAPR3';'DBA'
User SAPR3 does not have anything on database
dbmcli on SID>sql_execute select * from domain.tables where owner='SAPR3'
ERR
-24988,ERR_SQL: SQL error
100,Row not found
Any idea?
regards -
CC&B not able to connect the database
I have Welogic with Oracle CC&B 2.3.1 Installed on my local laptop.
I have local database also in my laptop (oracle 11g). While doing spl start I am able to access CC&B with weblogic using local database.
But when in configureEnv.cmd I changed database configuration to other database which is located on Unix box
My Laptop have 32-bit window 7.
In ConfigureEnv i gave all credentials of other database to which I am trying to connect. But I am facing below issue.
E:\BEA\jdk150_15
JAVA Memory arguments: -Xms1024m -Xmx1024m -XX:PermSize=300m
WLS Start Mode=Development
CLASSPATH=E:\BEA\wlserver_10.0\samples\server\examples\build\serverclasses;E:\BEA\patch_wss110\profiles\default\sys_manifest_classpath\weblogic_patch.jar;E:\BEA\patch_wlw1021\profiles\default\sys_manifest_classpath\weblogic_patch.jar;E:\BEA\patch_wls1002\profiles\default\sys_manifest_classpath\weblogic_patch.jar;E:\BEA\patch_cie640\profiles\default\sys_manifest_classpath\weblogic_patch.jar;E:\BEA\jdk150_15\lib\tools.jar;E:\BEA\wlserver_10.0\server\lib\weblogic_sp.jar;E:\BEA\wlserver_10.0\server\lib\weblogic.jar;E:\BEA\modules\features\weblogic.server.modules_10.0.2.0.jar;E:\BEA\modules\features\com.bea.cie.common-plugin.launch_2.1.2.0.jar;E:\BEA\wlserver_10.0\server\lib\webservices.jar;E:\BEA\modules\org.apache.ant_1.6.5/lib/ant-all.jar;E:\BEA\modules\net.sf.antcontrib_1.0b2.0/lib/ant-contrib.jar;;E:\BEA\wlserver_10.0\common\eval\pointbase\lib\pbembedded51.jar;E:\BEA\wlserver_10.0\common\eval\pointbase\lib\pbupgrade51.jar;E:\BEA\wlserver_10.0\common\eval\pointbase\lib\pbclient51.jar;E
:\BEA\wlserver_10.0\server\lib\xqrl.jar;;;E:\SPL\CCBDEV\splapp\standalone\lib\xalan-2.7.0.jar;E:\SPL\CCBDEV\splapp\standalone\lib\serializer-2.7.0.jar;E:\SPL\CCBDEV\splapp\standalone\lib\antlr-2.7.6.jar
PATH=E:\BEA\patch_wss110\profiles\default\native;E:\BEA\patch_wlw1021\profiles\default\native;E:\BEA\patch_wls1002\profiles\default\native;E:\BEA\patch_cie640\profiles\default\native;E:\BEA\wlserver_10.0\server\native\win\32;E:\BEA\wlserver_10.0\server\bin;E:\BEA\modules\org.apache.ant_1.6.5\bin;E:\BEA\jdk150_15\jre\bin;E:\BEA\jdk150_15\bin;E:\SPL\MicroFocus\Server5.1\Bin;E:\SPL\CCBDEV\runtime;E:\SPL\CCBDEV\runtime;E:\SPL\CCBDEV\bin;E:\SPL\CCBDEV\product\apache-ant-1.7.0\bin;E:\BEA\jdk150_15\bin;E:\OracleDB11201\Administrator\product\11.2.0\dbhome_1\bin;E:\app\prashant\product\11.2.0\dbhome_1\bin;E:\SPL\javaHome\Java\jdk150_15;E:\BEA\jdk150_15\bin;E:\SPL\MicroFocusServer5.1\Bin;E:\SPL\NIEESDEVL\product\apache-ant-1.7.0\bin;C:\csvn\bin\;C:\csvn\Python25\;C:\product\11.1.0\client_1;c:\perl\site\bin;c:\perl\bin;C:\Program Files\PC Connectivity Solution\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Common Files\Reallu
sion\CamSuite;C:\Program Files\Toshiba\Bluetooth Toshiba Stack\sys\;C:\Program Files\TortoiseSVN\bin;E:\app\prashant\client_1;E:\app\prashant\client_1\bin;;C:\PROGRA~1\QAS\QuickAddress Pro Web;E:\BEA;E:\BEA\wlserver_10.0;E:\SPL\hibernate-3.2;E:\SPL\NIEESDEV\bin;E:\BEA\wlserver_10.0\server\bin;E:\BEA\jrockit_150_15\bin;E:\BEA\wlserver_10.0\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.5.0_15"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_15-b04)
Java HotSpot(TM) Client VM (build 1.5.0_15-b04, mixed mode)
"Starting Weblogic with the following arguments"
E:\BEA\jdk150_15\bin\java -hotspot -Xms1024m -Xmx1024m -XX:PermSize=300m -da -Dplatform.home=E:\BEA\wlserver_10.0 -Dwls.home=E:\BEA\wlserver_10.0\myserver -Dwli.home=E:\BEA\wlserver_10.0\integration -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=E:\BEA\patch_wss110\profiles\default\sysext_manifest_classpath;E:\BEA\patch_wlw1021\profiles\default\sysext_manifest_classpath;E:\BEA\patch_wls1002\profiles\default\sysext_manifest_classpath;E:\BEA\patch_cie640\profiles\default\sysext_manifest_classpath -Dweblogic.management.username=system -Dweblogic.Name=myserver -Djava.security.policy=E:\BEA\wlserver_10.0\server\lib\weblogic.policy weblogic.Server
<Oct 12, 2011 10:23:51 AM BST> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
E:\BEA\wlserver_10.0\platform\lib\p13n\p13n-schemas.jar;E:\BEA\wlserver_10.0\platform\lib\p13n\p13n_common.jar;E:\BEA\wlserver_10.0\platform\lib\p13n\p13n_system.jar;E:\BEA\wlserver_10.0\platform\lib\p13n\wlp_services.jar;E:\BEA\wlserver_10.0\platform\lib\wlp\netuix_common.jar;E:\BEA\wlserver_10.0\platform\lib\wlp\netuix_schemas.jar;E:\BEA\wlserver_10.0\platform\lib\wlp\netuix_system.jar;E:\BEA\wlserver_10.0\platform\lib\wlp\wsrp-client.jar;E:\BEA\wlserver_10.0\platform\lib\wlp\wsrp-common.jar>
<Oct 12, 2011 10:23:54 AM BST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 1.5.0_15-b04 from Sun Microsystems Inc.>
<Oct 12, 2011 10:23:57 AM BST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.0 MP2 Sat Apr 25 01:45:38 EDT 2009 1213942 >
<Oct 12, 2011 10:24:03 AM BST> <Info> <WebLogicServer> <BEA-000215> <Loaded License : E:\BEA\license.bea>
<Oct 12, 2011 10:24:03 AM BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Oct 12, 2011 10:24:04 AM BST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Oct 12, 2011 10:24:05 AM BST> <Notice> <Log Management> <BEA-170019> <The server log file E:\SPL\CCBDEV\logs\system\myserver.log is opened. All server side log events will be written to this file.>
<Oct 12, 2011 10:24:15 AM BST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Oct 12, 2011 10:24:30 AM BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Oct 12, 2011 10:24:30 AM BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Oct 12, 2011 10:26:42 AM BST> <Warning> <HTTP> <BEA-101304> <Webapp: weblogic.servlet.internal.WebAppServletContext@d90727 - appName: 'SPLWeb', name: '/spl', context-path: '/spl', the role: cisusers defined in web.xml has not been mapped to principals in security-role-assignment in weblogic.xml. Will use the rolename itself as the principal-name.>
<Oct 12, 2011 10:27:11 AM BST> <Warning> <HTTP> <BEA-101304> <Webapp: weblogic.servlet.internal.WebAppServletContext@10a59d2 - appName: 'SPLWeb', name: '/spl/XAIApp', context-path: '/spl/XAIApp', the role: cisusers defined in web.xml has not been mapped to principals in security-role-assignment in weblogic.xml. Will use the rolename itself as the principal-name.>
Failed to load servlet Class: org.openspml.v2.transport.RPCRouterServletIgnoring: unable to load class:java.lang.ClassNotFoundException: org.openspml.v2.transport.RPCRouterServlet at: weblogic.xml.schema.binding.util.ClassUtil.loadClass(ClassUtil.java:76)Failed to load servlet Class: org.openspml.v2.transport.RPCRouterServletIgnoring: unable to load class:java.lang.ClassNotFoundException: org.openspml.v2.transport.RPCRouterServlet at: weblogic.xml.schema.binding.util.ClassUtil.loadClass(ClassUtil.java:76)INFO: Loaded log4j.properties from external file E:\SPL\CCBDEV\etc\conf\root\WEB-INF\classes\log4j.properties
INFO: Loaded spl.properties from external file E:\SPL\CCBDEV\etc\conf\root\WEB-INF\classes\spl.properties: {spl.ejbContainer.url=t3://L-156018395:6500, spl.runtime.options.isDevelopmentMode=false, spl.ejbContainer.password=spladmin, spl.runtime.service.extraInstallationServices=CILTINCP, spl.tools.loaded.applications=base,ccb,cm, spl.runtime.socket.file.dir=E:/SPL/CCBDEV/runtime, spl.runtime.cobol.sql.fetchSize=150, spl.runtime.cobol.cobrcall=false, spl.serviceBean.jndi.name=spl/servicebean, spl.ejbContainer.contextFactory=weblogic.jndi.WLInitialContextFactory, spl.runtime.cobol.encoding=UTF8, spl.runtime.cobol.sql.disableQueryCache=false, spl.ejbContainer.user=system, spl.runtime.utf8Database=true, spl.runtime.fusionlook=true, spl.runtime.environ.init.dir=E:/SPL/CCBDEV/etc, spl.runtime.cobol.sql.cache.maxTotalEntries=1000, spl.runtime.oracle.statementCacheSize=300, spl.runtime.cobol.sql.cursoredCache.maxRows=10, spl.runtime.cobol.remote.jvm=false, spl.runtime.sql.highValue=?}
- 2011-10-12 10:27:16,367 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (shared.context.ApplicationMode) Application set to production mode
- 2011-10-12 10:27:16,422 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (web.startup.SPLWebStartup) Initializing SPL web application
- 2011-10-12 10:27:16,694 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (web.dynamicui.TransformServletHelper) Disable UIPage Compression set to false
- 2011-10-12 10:27:16,908 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (support.context.ContextFactory) Creating lightweight context. This context cannot access Java business objects.
- 2011-10-12 10:27:16,964 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (support.context.ApplicationContext) Building hibernate configuration
- 2011-10-12 10:27:17,802 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (support.context.ApplicationContext) Loaded hibernate.properties from external file E:\SPL\CCBDEV\etc\conf\root\WEB-INF\classes\hibernate.properties
- 2011-10-12 10:27:17,847 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (support.context.ApplicationContext) Adding 0 hibernate mappings
- 2011-10-12 10:27:18,404 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (support.context.ApplicationContext) Done building hibernate configuration, time 1,440.181 ms
- 2011-10-12 10:27:18,405 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (support.context.ApplicationContext) Building hibernate session factory
- 2011-10-12 10:27:18,409 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (hibernate.connection.ConnectionProviderFactory) Initializing connection provider: org.hibernate.connection.C3P0ConnectionProvider
- 2011-10-12 10:27:18,418 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (hibernate.connection.C3P0ConnectionProvider) C3P0 using driver: oracle.jdbc.driver.OracleDriver at URL: jdbc:oracle:thin:@172.19.84.33:1521:niesdev
- 2011-10-12 10:27:18,418 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (hibernate.connection.C3P0ConnectionProvider) Connection properties: {user=cisadm, password=****}
- 2011-10-12 10:27:18,418 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (hibernate.connection.C3P0ConnectionProvider) autocommit mode: false
- 2011-10-12 10:27:20,856 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (v2.log.MLog) MLog clients using log4j logging.
- 2011-10-12 10:27:21,437 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (v2.c3p0.C3P0Registry) Initializing c3p0-0.9.1.2 [built 21-May-2007 15:04:56; debug? true; trace: 10]
- 2011-10-12 10:27:21,567 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (c3p0.impl.AbstractPoolBackedDataSource) Initializing c3p0 pool... com.mchange.v2.c3p0.PoolBackedDataSource@2217200b [ connectionPoolDataSource -> com.mchange.v2.c3p0.WrapperConnectionPoolDataSource@d691d4fd [ acquireIncrement -> 1, acquireRetryAttempts -> 30, acquireRetryDelay -> 1000, autoCommitOnClose -> false, automaticTestTable -> null, breakAfterAcquireFailure -> false, checkoutTimeout -> 0, connectionCustomizerClassName -> null, connectionTesterClassName -> com.mchange.v2.c3p0.impl.DefaultConnectionTester, debugUnreturnedConnectionStackTraces -> false, factoryClassLocation -> null, forceIgnoreUnresolvedTransactions -> false, identityToken -> 1br00b48i1wns8gho21ebz|1c95553, idleConnectionTestPeriod -> 0, initialPoolSize -> 1, maxAdministrativeTaskTime -> 0, maxConnectionAge -> 0, maxIdleTime -> 300, maxIdleTimeExcessConnections -> 0, maxPoolSize -> 150, maxStatement
s -> 0, maxStatementsPerConnection -> 0, minPoolSize -> 1, nestedDataSource -> com.mchange.v2.c3p0.DriverManagerDataSource@d869ae3f [ description -> null, driverClass -> null, factoryClassLocation -> null, identityToken -> 1br00b48i1wns8gho21ebz|1b5d53a, jdbcUrl -> jdbc:oracle:thin:@172.19.84.33:1521:niesdev, properties -> {user=******, password=******} ], preferredTestQuery -> null, propertyCycle -> 0, testConnectionOnCheckin -> false, testConnectionOnCheckout -> false, unreturnedConnectionTimeout -> 0, usesTraditionalReflectiveProxies -> false; userOverrides: {} ], dataSourceName -> null, factoryClassLocation -> null, identityToken -> 1br00b48i1wns8gho21ebz|1715c20, numHelperThreads -> 3 ]
- 2011-10-12 10:37:26,348 [com.mchange.v2.async.ThreadPoolAsynchronousRunner$PoolThread-#0] WARN (v2.resourcepool.BasicResourcePool) com.mchange.v2.resourcepool.BasicResourcePool$AcquireTask@1b1dd12 -- Acquisition Attempt Failed!!! Clearing pending acquires. While trying to acquire a needed new resource, we failed to succeed more than the maximum number of allowed acquisition attempts (30). Last acquisition attempt exception:
java.sql.SQLException: Io exception: Software caused connection abort: recv failed
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:74)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:131)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:197)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:261)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:566)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:418)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:508)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:203)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:33)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:510)
at com.mchange.v2.c3p0.DriverManagerDataSource.getConnection(DriverManagerDataSource.java:134)
at com.mchange.v2.c3p0.WrapperConnectionPoolDataSource.getPooledConnection(WrapperConnectionPoolDataSource.java:182)
at com.mchange.v2.c3p0.WrapperConnectionPoolDataSource.getPooledConnection(WrapperConnectionPoolDataSource.java:171)
at com.mchange.v2.c3p0.impl.C3P0PooledConnectionPool$1PooledConnectionResourcePoolManager.acquireResource(C3P0PooledConnectionPool.java:137)
at com.mchange.v2.resourcepool.BasicResourcePool.doAcquire(BasicResourcePool.java:1014)
at com.mchange.v2.resourcepool.BasicResourcePool.access$800(BasicResourcePool.java:32)
at com.mchange.v2.resourcepool.BasicResourcePool$AcquireTask.run(BasicResourcePool.java:1810)
at com.mchange.v2.async.ThreadPoolAsynchronousRunner$PoolThread.run(ThreadPoolAsynchronousRunner.java:547)
Caused by: java.net.SocketException: Software caused connection abort: recv failed
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:129)
at oracle.net.ns.Packet.receive(Packet.java:240)
at oracle.net.ns.DataPacket.receive(DataPacket.java:92)
at oracle.net.ns.NetInputStream.getNextPacket(NetInputStream.java:172)
at oracle.net.ns.NetInputStream.read(NetInputStream.java:117)
at oracle.net.ns.NetInputStream.read(NetInputStream.java:92)
at oracle.net.ns.NetInputStream.read(NetInputStream.java:77)
at oracle.jdbc.driver.T4CMAREngine.unmarshalUB1(T4CMAREngine.java:1034)
at oracle.jdbc.driver.T4CMAREngine.unmarshalSB1(T4CMAREngine.java:1010)
at oracle.jdbc.driver.T4C8TTIdty.receive(T4C8TTIdty.java:516)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:332)
... 12 more
- 2011-10-12 10:37:26,348 [com.mchange.v2.async.ThreadPoolAsynchronousRunner$PoolThread-#1] WARN (v2.resourcepool.BasicResourcePool) com.mchange.v2.resourcepool.BasicResourcePool$AcquireTask@6dbcef -- Acquisition Attempt Failed!!! Clearing pending acquires. While trying to acquire a needed new resource, we failed to succeed more than the maximum number of allowed acquisition attempts (30). Last acquisition attempt exception:
java.sql.SQLException: Io exception: Software caused connection abort: recv failed
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:74)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:131)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:197)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:261)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:566)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:418)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:508)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:203)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:33)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:510)
at com.mchange.v2.c3p0.DriverManagerDataSource.getConnection(DriverManagerDataSource.java:134)
at com.mchange.v2.c3p0.WrapperConnectionPoolDataSource.getPooledConnection(WrapperConnectionPoolDataSource.java:182)
at com.mchange.v2.c3p0.WrapperConnectionPoolDataSource.getPooledConnection(WrapperConnectionPoolDataSource.java:171)
at com.mchange.v2.c3p0.impl.C3P0PooledConnectionPool$1PooledConnectionResourcePoolManager.acquireResource(C3P0PooledConnectionPool.java:137)
at com.mchange.v2.resourcepool.BasicResourcePool.doAcquire(BasicResourcePool.java:1014)
at com.mchange.v2.resourcepool.BasicResourcePool.access$800(BasicResourcePool.java:32)
at com.mchange.v2.resourcepool.BasicResourcePool$AcquireTask.run(BasicResourcePool.java:1810)
at com.mchange.v2.async.ThreadPoolAsynchronousRunner$PoolThread.run(ThreadPoolAsynchronousRunner.java:547)
Caused by: java.net.SocketException: Software caused connection abort: recv failed
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:129)
at oracle.net.ns.Packet.receive(Packet.java:240)
at oracle.net.ns.DataPacket.receive(DataPacket.java:92)
at oracle.net.ns.NetInputStream.getNextPacket(NetInputStream.java:172)
at oracle.net.ns.NetInputStream.read(NetInputStream.java:117)
at oracle.net.ns.NetInputStream.read(NetInputStream.java:92)
at oracle.net.ns.NetInputStream.read(NetInputStream.java:77)
at oracle.jdbc.driver.T4CMAREngine.unmarshalUB1(T4CMAREngine.java:1034)
at oracle.jdbc.driver.T4CMAREngine.unmarshalSB1(T4CMAREngine.java:1010)
at oracle.jdbc.driver.T4C8TTIdty.receive(T4C8TTIdty.java:516)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:332)
... 12 more
- 2011-10-12 10:37:26,425 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] WARN (hibernate.cfg.SettingsFactory) Could not obtain connection metadata
java.sql.SQLException: Connections could not be acquired from the underlying database!
at com.mchange.v2.sql.SqlUtils.toSQLException(SqlUtils.java:106)
at com.mchange.v2.c3p0.impl.C3P0PooledConnectionPool.checkoutPooledConnection(C3P0PooledConnectionPool.java:529)
at com.mchange.v2.c3p0.impl.AbstractPoolBackedDataSource.getConnection(AbstractPoolBackedDataSource.java:128)
at org.hibernate.connection.C3P0ConnectionProvider.getConnection(C3P0ConnectionProvider.java:56)
at org.hibernate.cfg.SettingsFactory.buildSettings(SettingsFactory.java:84)
at org.hibernate.cfg.Configuration.buildSettingsInternal(Configuration.java:2090)
at org.hibernate.cfg.Configuration.buildSettings(Configuration.java:2086)
at org.hibernate.cfg.Configuration.buildSessionFactory(Configuration.java:1311)
at com.splwg.base.support.context.ApplicationContext.buildSessionFactory(ApplicationContext.java:188)
at com.splwg.base.support.context.ContextFactory.buildContext(ContextFactory.java:113)
at com.splwg.base.support.context.ContextFactory.createLightweightContext(ContextFactory.java:749)
at com.splwg.base.web.startup.SPLWebStartup.initializeApplicationContext(SPLWebStartup.java:180)
at com.splwg.base.web.startup.SPLWebStartup.contextInitialized(SPLWebStartup.java:63)
at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:458)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:168)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1744)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:2918)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:973)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:361)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:117)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:635)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:182)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:359)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:196)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
Caused by: com.mchange.v2.resourcepool.CannotAcquireResourceException: A ResourcePool could not acquire a resource from its primary factory or source.
at com.mchange.v2.resourcepool.BasicResourcePool.awaitAvailable(BasicResourcePool.java:1319)
at com.mchange.v2.resourcepool.BasicResourcePool.prelimCheckoutResource(BasicResourcePool.java:557)
at com.mchange.v2.resourcepool.BasicResourcePool.checkoutResource(BasicResourcePool.java:477)
at com.mchange.v2.c3p0.impl.C3P0PooledConnectionPool.checkoutPooledConnection(C3P0PooledConnectionPool.java:525)
... 46 more
- 2011-10-12 10:37:26,548 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (hibernate.dialect.Dialect) Using dialect: org.hibernate.dialect.Oracle10gDialect
- 2011-10-12 10:37:26,736 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (hibernate.transaction.TransactionFactoryFactory) Transaction strategy: org.hibernate.transaction.JDBCTransactionFactory
- 2011-10-12 10:37:26,751 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (hibernate.transaction.TransactionManagerLookupFactory) No TransactionManagerLookup configured (in JTA environment, use of read-write or transactional second-level cache is not recommended)
- 2011-10-12 10:37:27,067 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (hibernate.impl.SessionFactoryImpl) building session factory
- 2011-10-12 10:37:27,129 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (hibernate.impl.SessionFactoryObjectFactory) Not binding factory to JNDI, no JNDI name configured
- 2011-10-12 10:37:27,193 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (support.context.ApplicationContext) Done building hibernate session factory, time 608,776.565 ms(10 min 8.777 sec)
Please help me out here.
Any advice please.
Regards,
Techie
Edited by: 815302 on Oct 12, 2011 2:54 AMI tried same with tomcat...
CC&B 2.3.1 with apache tomcat trying to connect with other database.... getting below error
java.sql.SQLException: Io exception: Software caused connection abort: recv failed
Oct 17, 2011 4:44:05 PM org.apache.catalina.core.AprLifecycleListener init
INFO: The Apache Tomcat Native library which allows optimal performance in production environments was not found on the java.library.path: E:\SPL\javaHome\Java\jdk1.5.0_21\bin;.;C:\Windows\system32;C:\Windows;E:\SPL\MicroFocus\Server5.1\Bin;E:\SPL\NIEESDEVL\runtime;E:\SPL\javaHome\Java\jdk1.5.0_21\bin;E:\SPL\NIEESDEVL\runtime;E:\SPL\NIEESDEVL\bin;E:\SPL\NIEESDEVL\product\apache-ant-1.7.0\bin;E:\SPL\javaHome\Java\jdk1.5.0_21\bin;E:\DEMODB\product\11.2.0\dbhome_1\bin;E:\SPL\MicroFocusServer5.1\Bin;E:\SPL\NIEESDEVL\product\apache-ant-1.7.0\bin;C:\csvn\bin\;C:\csvn\Python25\;c:\perl\site\bin;c:\perl\bin;C:\Program Files\PC Connectivity Solution\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Common Files\Reallusion\CamSuite;C:\Program Files\Toshiba\Bluetooth Toshiba Stack\sys\;C:\Program Files\TortoiseSVN\bin;E:\app\prashant\client_1\bin;;C:\PROGRA~1\QAS\QuickAddress Pro Web;E:\BEA;E:\BEA\wlserver_10.0;E:\SPL\hibernate-3.2;E:\SPL\NIEESDEV\bin;E:\BEA\wlserver_10.0\server\bin;C:\Program Files\Microsoft SQL Server\90\Tools\binn\
Oct 17, 2011 4:44:05 PM org.apache.coyote.http11.Http11Protocol init
INFO: Initializing Coyote HTTP/1.1 on http-6500
Oct 17, 2011 4:44:05 PM org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 2005 ms
Oct 17, 2011 4:44:06 PM org.apache.catalina.core.StandardService start
INFO: Starting service Catalina
Oct 17, 2011 4:44:06 PM org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/6.0.13
INFO: Loaded log4j.properties from external file E:\SPL\NIEESDEVL\etc\conf\XAIApp\WEB-INF\classes\log4j.properties
INFO: Loaded spl.properties from external file E:\SPL\NIEESDEVL\etc\conf\XAIApp\WEB-INF\classes\spl.properties: {spl.runtime.options.isDevelopmentMode=true, spl.runtime.service.extraInstallationServices=CILTINCP, spl.runtime.cobol.remote.jvmcommand=E:/SPL/javaHome/Java/jdk1.5.0_21/bin/java.exe, spl.tools.loaded.applications=base,ccb,cm, spl.runtime.cobol.remote.jvmcount=2, spl.runtime.socket.file.dir=E:/SPL/NIEESDEVL/runtime, spl.runtime.cobol.sql.fetchSize=150, spl.runtime.cobol.cobrcall=false, spl.runtime.initialize.waittime=90, spl.runtime.cobol.encoding=UTF8, spl.runtime.cobol.sql.disableQueryCache=false, spl.runtime.utf8Database=true, spl.runtime.fusionlook=true, spl.runtime.cobol.remote.jvmoptions=-Xmx1024m -server -Dfile.encoding=ISO8859_1 -cp E:/SPL/NIEESDEVL/splapp/standalone/config;E:/SPL/NIEESDEVL/splapp/standalone/lib/activation_api-1.1.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/cm.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/coherence-3.5.2.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/coherence-work-3.5.2.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/commonj-3.5.2.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/commons-beanutils-core-1.7.0.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/commons-cli-1.1.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/commons-codec-1.3.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/commons-collections-2.1.1.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/commons-fileupload-1.2.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/commons-httpclient-2.0.2.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/commons-io-1.3.2.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/commons-lang-2.2.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/commons-logging-1.0.4.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/concurrent-1.3.4.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/dom4j-1.6.1.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/e2Vault.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/hibernate-3.2.7.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/icu4j-3.6.1.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/jaxen-1.1.1.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/jcip-annotations.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/jstl-api-1.2.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/jta.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/jtds-1.2.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/log4j-1.2.15.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/mail_api-1.4.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/mfcobol.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/ojdbc5-11.1.0.7.0.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/orai18n-collation.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/orai18n-mapping.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/orai18n-utility.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/orai18n.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/serializer-2.7.0.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/spl-base-2.2.0.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/spl-ccb-2.3.1.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/spl-servicebeaninterface-2.2.0.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/spl-serviceclient-2.2.0.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/spl-shared-2.2.0.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/spl-spml-2.2.0.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/spl-web-2.2.0.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/spl-xai-2.2.0.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/stax-api-1.0.1.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/stax2.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/staxmate-0.9.1.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/wstx-asl-3.2.1.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/xalan-2.7.0.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/xmlparserv2.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/xquery.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/xstream-1.2.1.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/yjp-controller-api-redist.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/geronimo-spec-j2ee-1.4-rc4.jar, spl.runtime.environ.init.dir=E:/SPL/NIEESDEVL/etc, spl.runtime.cobol.sql.cache.maxTotalEntries=1000, spl.runtime.oracle.statementCacheSize=300, spl.runtime.cobol.remote.rmiStartPort=6503, spl.runtime.cobol.sql.cursoredCache.maxRows=10, spl.runtime.cobol.remote.jvm=true, spl.runtime.cobol.remote.lib.prefix=xaiapp, spl.runtime.sql.highValue=?}
- 2011-10-17 16:44:12,312 [main] INFO (shared.context.ApplicationMode) Application set to development mode
- 2011-10-17 16:44:12,325 [main] INFO (web.dynamicui.TransformServletHelper) Disable UIPage Compression set to false
- 2011-10-17 16:44:12,349 [main] WARN (web.common.ServletHelper) Web app env variable maxAge not defined; defaulting to 1 sec
- 2011-10-17 16:44:12,356 [main] INFO (web.startup.DeferredXAIStartup) Starting thread for deferred XAI application context initialization
- 2011-10-17 16:44:12,371 [Thread-1] INFO (web.startup.DeferredXAIStartup) Waiting 90 seconds before starting XAI application context initialization
INFO: Loaded log4j.properties from external file E:\SPL\NIEESDEVL\etc\conf\root\WEB-INF\classes\log4j.properties
INFO: Loaded spl.properties from external file E:\SPL\NIEESDEVL\etc\conf\root\WEB-INF\classes\spl.properties: {spl.runtime.options.isDevelopmentMode=true, spl.runtime.service.extraInstallationServices=CILTINCP, spl.runtime.cobol.remote.jvmcommand=E:/SPL/javaHome/Java/jdk1.5.0_21/bin/java.exe, spl.tools.loaded.applications=base,ccb,cm, spl.runtime.cobol.remote.jvmcount=2, spl.runtime.socket.file.dir=E:/SPL/NIEESDEVL/runtime, spl.runtime.cobol.sql.fetchSize=150, spl.runtime.cobol.cobrcall=false, spl.runtime.cobol.encoding=UTF8, spl.runtime.cobol.sql.disableQueryCache=false, com.splwg.grid.online.enabled=false, spl.runtime.utf8Database=true, spl.runtime.fusionlook=true, spl.runtime.cobol.remote.jvmoptions=-Xmx1024m -server -Dfile.encoding=ISO8859_1 -cp E:/SPL/NIEESDEVL/splapp/standalone/config;E:/SPL/NIEESDEVL/splapp/standalone/lib/activation_api-1.1.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/cm.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/coherence-3.5.2.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/coherence-work-3.5.2.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/commonj-3.5.2.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/commons-beanutils-core-1.7.0.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/commons-cli-1.1.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/commons-codec-1.3.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/commons-collections-2.1.1.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/commons-fileupload-1.2.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/commons-httpclient-2.0.2.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/commons-io-1.3.2.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/commons-lang-2.2.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/commons-logging-1.0.4.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/concurrent-1.3.4.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/dom4j-1.6.1.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/e2Vault.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/hibernate-3.2.7.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/icu4j-3.6.1.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/jaxen-1.1.1.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/jcip-annotations.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/jstl-api-1.2.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/jta.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/jtds-1.2.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/log4j-1.2.15.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/mail_api-1.4.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/mfcobol.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/ojdbc5-11.1.0.7.0.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/orai18n-collation.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/orai18n-mapping.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/orai18n-utility.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/orai18n.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/serializer-2.7.0.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/spl-base-2.2.0.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/spl-ccb-2.3.1.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/spl-servicebeaninterface-2.2.0.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/spl-serviceclient-2.2.0.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/spl-shared-2.2.0.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/spl-spml-2.2.0.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/spl-web-2.2.0.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/spl-xai-2.2.0.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/stax-api-1.0.1.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/stax2.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/staxmate-0.9.1.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/wstx-asl-3.2.1.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/xalan-2.7.0.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/xmlparserv2.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/xquery.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/xstream-1.2.1.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/yjp-controller-api-redist.jar;E:/SPL/NIEESDEVL/splapp/standalone/lib/geronimo-spec-j2ee-1.4-rc4.jar, spl.runtime.environ.init.dir=E:/SPL/NIEESDEVL/etc, com.splwg.grid.distThreadPool.threads.DEFAULT=5, spl.runtime.cobol.sql.cache.maxTotalEntries=1000, spl.runtime.oracle.statementCacheSize=300, spl.runtime.cobol.remote.rmiStartPort=6503, spl.runtime.cobol.sql.cursoredCache.maxRows=10, spl.runtime.cobol.remote.jvm=true, com.splwg.batch.scheduler.daemon=false, spl.runtime.sql.highValue=?}
- 2011-10-17 16:44:18,459 [main] INFO (shared.context.ApplicationMode) Application set to development mode
- 2011-10-17 16:44:18,473 [main] INFO (web.startup.SPLWebStartup) Initializing SPL web application
- 2011-10-17 16:44:18,477 [main] INFO (web.dynamicui.TransformServletHelper) Disable UIPage Compression set to false
- 2011-10-17 16:44:18,522 [main] INFO (support.context.ContextFactory) Creating default context
- 2011-10-17 16:44:39,053 [main] ERROR (support.context.ContextFactory) Error getting connection to database jdbc:oracle:thin:@172.19.84.33:1521:niesdev, with user cisadm and driver oracle.jdbc.driver.OracleDriver
java.sql.SQLException: Io exception: Software caused connection abort: recv failed
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:74)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:131)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:197)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:261)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:566)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:418)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:508)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:203)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:33)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:510)
at java.sql.DriverManager.getConnection(DriverManager.java:525)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
at com.splwg.base.support.context.ContextFactory.getConnection(ContextFactory.java:134)
at com.splwg.base.support.context.ContextFactory.getBaseLookupInterfaceNames(ContextFactory.java:143)
at com.splwg.base.support.context.ContextFactory.buildContext(ContextFactory.java:102)
at com.splwg.base.support.context.ContextFactory.buildContext(ContextFactory.java:90)
at com.splwg.base.support.context.ContextFactory.createDefaultContext(ContextFactory.java:498)
at com.splwg.base.web.startup.SPLWebStartup.initializeApplicationContext(SPLWebStartup.java:178)
at com.splwg.base.web.startup.SPLWebStartup.contextInitialized(SPLWebStartup.java:63)
at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:3827)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:4334)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1045)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:719)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1045)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
at org.apache.catalina.core.StandardService.start(StandardService.java:516)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:710)
at org.apache.catalina.startup.Catalina.start(Catalina.java:566)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:592)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:288)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:413)
Caused by: java.net.SocketException: Software caused connection abort: recv failed
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:129)
at oracle.net.ns.Packet.receive(Packet.java:240)
at oracle.net.ns.DataPacket.receive(DataPacket.java:92)
at oracle.net.ns.NetInputStream.getNextPacket(NetInputStream.java:172)
at oracle.net.ns.NetInputStream.read(NetInputStream.java:117)
at oracle.net.ns.NetInputStream.read(NetInputStream.java:92)
at oracle.net.ns.NetInputStream.read(NetInputStream.java:77)
at oracle.jdbc.driver.T4CMAREngine.unmarshalUB1(T4CMAREngine.java:1034)
at oracle.jdbc.driver.T4CMAREngine.unmarshalSB1(T4CMAREngine.java:1010)
at oracle.jdbc.driver.T4C8TTIdty.receive(T4C8TTIdty.java:516)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:332)
... 28 more
Oct 17, 2011 4:44:39 PM org.apache.catalina.core.StandardContext start
SEVERE: Error listenerStart
Oct 17, 2011 4:44:39 PM org.apache.catalina.core.StandardContext start
SEVERE: Context [] startup failed due to previous errors
- 2011-10-17 16:44:39,143 [main] INFO (web.startup.SPLWebStartup) Shutting Down the JMX Connectors...
- 2011-10-17 16:44:39,161 [main] INFO (web.startup.SPLWebStartup) JMX Connectors shutdown successfully
- 2011-10-17 16:44:39,162 [main] INFO (web.startup.SPLWebStartup) Shutting Down the Application Context...
- 2011-10-17 16:44:39,183 [main] INFO (web.startup.SPLWebStartup) Application Context shutdown successfully
Oct 17, 2011 4:44:39 PM org.apache.coyote.http11.Http11Protocol start
INFO: Starting Coyote HTTP/1.1 on http-6500
Oct 17, 2011 4:44:39 PM org.apache.jk.common.ChannelSocket init
INFO: JK: ajp13 listening on /0.0.0.0:8009
Oct 17, 2011 4:44:39 PM org.apache.jk.server.JkMain start
INFO: Jk running ID=0 time=0/29 config=null
Oct 17, 2011 4:44:39 PM org.apache.catalina.startup.Catalina start
INFO: Server startup in 34150 ms -
Datareader is not able to connect with database-Urgent
Hi All,
All of a sudden the Datareader component in my ML experiment is not able to connect with database with the following error:
[ModuleOutput] DllModuleHost Error: 1 : Program::Main encountered fatal exception: Microsoft.Analytics.Exceptions.ErrorMapping+ModuleException: Error 0000: Internal error ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.ArgumentException: The value's length for key 'password' exceeds it's limit of '128'.
Module finished after a runtime of 00:00:00.2031339 with exit code -2
Module failed due to negative exit code of -2
It complains about the password being long-but the same credentials I have been using for the last 2 months and still able to use it to run sql queries on that same database using the management portal.
It appears that Azure encrypts the password and that encrypted password is too long...just my guess after looking that the output.Inside Ml it just says as internal error
Would appreciate if someone can point to the issue at the earliest...(There is a demo early next week)
Subscription:Enterprise,
LOCATION: East Asia
Regards,
BiswajitHi,
Please check this url:
https://studio.azureml.net/Home/ViewWorkspace/bc85d4f81d2246c4b1430eb395229a3a?&hashSeg=#Workspaces/Experiments/Experiment/bc85d4f81d2246c4b1430eb395229a3a.f-id.11776ae4400f4c1aa9f58308c30810fa/ViewExperiment
which is an experiment which I created doing save as of the experiment in which the data reader works.
I stripped everything except the data reader and setup the rest of the components...I finally have to write the results back ,so also pulled a Writer component.
Now,the data reader works fine..but the Writer fails:
Error 0071: Incorrect username "acnadmin" or password is passed
Strangely,its the same credentials set in the DataReader.
Looks like all the DataInput/Output components created recently only have the problem.
Once again,while the datareader in this case passes the password in plain text,the writer encrypts,hence fails. -
How to connect one database in two threads?
Dear All,
If anyone can tell me how to connect one database concurrently?
I tried the following idea:
1.create a Hashtable to keep database objects(those databases have been opened)
2.Before openning(connecting) a database:first step is to check the hashtable.
If the the database object is in the hashtable, this object will be returned.
If the datatbase object is not in the hastable, open the database and store this opened database object into the hashtable.
I failed the test of this implementation. My test is:Create two threads (extend java Thread class).In each of these two threads, try to open the same database.Just like the following:
MyThread thread1 = new MyThread();
MyThread thread2 = new MyThread();
thread1.start();
thread2.start();
I guessed the database object in the hashtable would be returned in the second thread.Unfortunatly, I only got an exception which meant the database couldn't be opened twice.It looks like the second thread happened before the opened database object stored into the hashtable.
I cannot figure out if my design is wrong or my test application is wrong.
I really appriatiate your attentions!!!
Luum not sure i follow exactly but in your code add the word synchronise to it and this means only 1 tread can access it at any 1 time.
So your could have a class which is a singleton so it only opens the dbase once and then all other access share your connection.
so
public class foo{
foo INSTANCE = new foo();
private foo(){} //private constructor
then all your methods use foo's internal dbase connection. Am i making sense -
Hi, i have som problems connecting to database:
Case 1:
I've moved a IIS from one datacenter to another one. (installed all new)
On VS, after install LS and all of the componets, can install good an APP, from my laptop. (using publish directly (webdeploy)) .
And, installation creates a new database on my SQL (another machine ).
I've installed my application on my laptop, and then when i open, application says Error Comunicating with database.
From my VS, works fine.
Scenario:
My Location (one External IP)
DataCenter (one external IP for IIS) (with NAT directly to WEB SERVER (has internal IP)) And SNAT to same IP External (NO FIREWALL )
Datacenter (one External IP for SQL) (With NAT directly to SQL Server) And SNAT to same IP External (NO FIREWALL)
All configuration on Web.Config calls externals IP .
WEBSERVER AND SQLSERVER (has on the same network, with IP RANGE 192.168.10.X)
I've tested to put in web.config internal address (and then open application directly from WEBSERVER) and works fine.
Problem it's external connection, but... i can connect to database from VS and from SSMS from My laptop...HI Ivan,
From your description above, here are some suggestions for you.
1. Ping the external server using its IP address, and check whether it is fine;
2. Check whether you use the correct connection string;
If you have checked the items above, perhaps this is permission issue. You can use SQL Server authentication, and check whether it makes any difference.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
EM Alert: Critical:PROD.test.edu.au - Failed to connect to database instanc
HI Experts,
Today i got this alert from oem grid during RMAN bakcup of the PROD database.when i try to connect the database i am able to get into to the DB successfully with out any issues.
But i am not sure why this error has come and resone behind that.Please advise.
From: Oracle OEM [mailto:[email protected]]
Sent: Tuesday, February 22, 2011 11:21 PM
To: DBA_GROUP
Subject: EM Alert: Critical:PROD.test.edu.au - Failed to connect to database instance: ORA-00257: archiver error. Connect internal only, until freed. (DBD ERROR: OCISessionBegin).
Target Name=PROD.test.edu.au
Target type=Database Instance
Host=delhi.win.test.edu.au
Occurred At=Feb 22, 2011 11:20:33 PM EST
Message=Failed to connect to database instance: ORA-00257: archiver error. Connect internal only, until freed. (DBD ERROR: OCISessionBegin).
Severity=Critical
Acknowledged=No
Notification Rule Name=Database Availability and Critical States
Notification Rule Owner=SYSMAN
when i check the alertlog file i could see the following
Tue Feb 22 23:01:36 2011
Starting control autobackup
Control autobackup written to DISK device
handle '/oracledb/rman_backup/PROD/control_c-197342269-20110222-01'
Tue Feb 22 23:22:42 2011
Errors in file /oracle/admin/PROD/udump/hubprd_ora_27069.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-01438: value larger than specified precision allowed for this column
ORA-06512: at line 2
PLease let me know the cause of the issues and solution to overcome this issues.
Regards,
SalaiIt would appear that your archive location is full. If it is full, then try to get some more free space there by either deleting the old archives or specifying a different location.
I don't see any mention of a flash recovery area in the log message, but you may also want to confirm that you have reached your space allocated to the FRA. -
*** ERROR = Connect to database failed, rc = -4008 (POS(1) Unknown user na
Hello
I have just finished a dbcopy of Maxdb 7.6 to a new system with initilization.i can bring the db online. I have ran the xuser command to fix the db users as below command as per note 39439
i changed them in home dir of sidadm,sqdsid
xuser -U DEFAULT -u SAP<SID>,<password> -d <database_name> -n <database_server> -S SAPR3 -t 0 -I 0 set
c) DBM user: for example, CONTROL.
xuser -U c -u CONTROL,<password> -d <database_name> -n <database_server> -S INTERNAL set
d) SYSDBA user: for example, SUPERDBA.
xuser -U w -u SUPERDBA,<password> -d <database_name> -n <database_server> -S INTERNAL set
But iam having the below error now when trying to bring the SAP system up in dev_w0
C Try to connect (DEFAULT) onconnection 0 ...
C
C Mon Dec 19 21:46:11 2011
C *** ERROR => Connect to database failed, rc = -4008 (POS(1) Unknown user name/password combinati
on)
[dbsdbsql.cpp 137]
B ***LOG BY2=> sql error -4008 performing CON [dbsh#3 @ 1208] [dbsh 1208 ]
B ***LOG BY0=> POS(1) Unknown user name/password combination [dbsh#3 @ 1208] [dbsh 1208 ]
B ***LOG BY2=> sql error -4008 performing CON [dblink#8 @ 433] [dblink 0433 ]
B ***LOG BY0=> POS(1) Unknown user name/password combination [dblink#8 @ 433] [dblink 0433 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1537]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10837]
M
is there something that i missed somewhere?
Any ideas welcomeerpsyscs1:cs1adm 46> xuser list
XUSER Entry 1
Key :DEFAULT
Username :SAPCS1
UsernameUCS2:S.A.P.C.S.1. . . . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :CS1
Nodename :erpsyscs1
Sqlmode :SAPR3
Cachelimit :-1
Timeout
Isolation
Charset :<unspecified>
XUSER Entry 2
Key :c
Username :CONTROL
UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :CS1
Nodename :erpsyscs1
Sqlmode :INTERNAL
Cachelimit :-1
Timeout :-1
Isolation :-1
Charset :<unspecified>
XUSER Entry 3
Key :c_J2EE
Username :CONTROL
UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :CS1
Nodename :erpsyscs1
Sqlmode :SAPR3
Cachelimit :-1
Timeout
Isolation
Charset :<unspecified>
XUSER Entry 4
Key :w
Username :SUPERDBA
UsernameUCS2:S.U.P.E.R.D.B.A. . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :CS1
Nodename :erpsyscs1
Sqlmode :INTERNAL
Cachelimit :-1
Timeout :-1
Isolation :-1
Charset :<unspecified> -
ORA-03113 when trying to connect to database
RDBMS Version:: 9.2.0.6
Operating System and Version:: Win2003 Small Business Server
Error Number (if applicable):: ORA-03113
Server Net Version:: 9.2.0.6
Client Operating System and Version:: Solaris10
Client Net Version:: 2.1.3
ORA-03113 when trying to connect to database
I've currently a 7.1.3 client on SUN Solaris (5.10 Generic_118844-26 i86pc i386 i86pc) where I want to connect to the 9.2.0.6 database on a Win2003 Server hardware.
When i try to connect via SQL*Plus (Release 3.1.3.4.1), I get ORA-03113. Looking into the listener resp. alertfile on the server, I can see that the connectiorequest is recognized, but immediately answered by an ORA-0600, producing also trc-files.
listener: 25-MAI-2007 09:37:23 * (CONNECT_DATA=(SID=HTASQL)(CID=(PROGRAM=)(HOST=eklvpa)(USER=sat250))) * (ADDRESS=(PROTOCOL=tcp)(HOST=172.17.233.3)(PORT=32790)) * establish * HTASQL * 0
alert: ORA-00600: internal error code, arguments: [12333], [26], [0], [115], [], [], [], []
Activating traces on the client-side showed the following errors:
-<ERROR>- ntus2err: sd=8, op=1, resnt[0]=511, resnt[1]=2, resnt[2]=0
-<ERROR>- nserror: nsres: id=0, op=65, ns=12541, ns2=12560; nt[0]=511, nt[1]=2, nt[2]=0
-<ERROR>- nsopen: unable to open transport
-<ERROR>- nsprecv: transport read error
-<ERROR>- nserror: nsres: id=0, op=68, ns=12537, ns2=12560; nt[0]=507, nt[1]=0, nt[2]=0
-<ERROR>- osnqrc: wanted 1 got 0, type 0
-<ERROR>- osnqper: error from osnqrc
-<ERROR>- osnqper: nr err code: 0
-<ERROR>- osnqper: ns main err code: 12537
-<ERROR>- osnqper: ns (2) err code: 12560
-<ERROR>- osnqper: nt main err code: 507
-<ERROR>- osnqper: nt (2) err code: 0
-<ERROR>- osnqper: nt OS err code: 0
-<ERROR>- osnqsm: send-break: failed to send OOB break...
-<ERROR>- osnqper: error from send-marker
-<ERROR>- osnqper: nr err code: 0
-<ERROR>- osnqper: ns main err code: 12583
-<ERROR>- osnqper: ns (2) err code: 0
-<ERROR>- osnqper: nt main err code: 0
-<ERROR>- osnqper: nt (2) err code: 0
-<ERROR>- osnqper: nt OS err code: 0
-<ERROR>- osnqbr: returning 3113
Can anybody help me in determining the problem ? Is there a systemtic incompatibility in connecting a 7.1.3 client to a 9.2 (or even higher) database ?Thanks for your reply.
But the funny thing on this compatibility issues is, that this configuration worked before. The only thing we did, was to setup the client-PC on a new hardware with also a new operating system (upgrading from Solaris 5.8 to 5.10). And from that time we encountered this problem.
Are there any OS-related problems known or better to say: is (was) ORACLE 7.1.3 supported on Solaris 5.10 ? Should we look for any patches which might help us ? -
No connection to database, session terminated
hi all,
we are facing a oracle db problem, when we start database, SAP on Solaris 5.10. after some time error comes from sap Gui
No connection to database, session terminated
when we checked db , database was shutdown.
error in Alter_SID.log
Errors in file /oracle/DEV/saptrace/background/dev_smon_16314.trc:
ORA-00600: internal error code, arguments: [4137], [], [], [], [], [], [], []
Wed May 19 18:45:12 2010
ORACLE Instance DEV (pid = 9) - Error 600 encountered while recovering transaction (9, 27).
Wed May 19 18:45:12 2010
Errors in file /oracle/DEV/saptrace/background/dev_smon_16314.trc:
ORA-00600: internal error code, arguments: [4137], [], [], [], [], [], [], []
plz guide
ImranHi,
What is your database release ?
You can try first shutdown the database if it is in mount state. Then restart the complete system.
If the problem remains same..
Please check the below notes: (and the notes suggested in the below notes)
[Note 658744 - Composite SAP Note: ORA-00600|https://service.sap.com/sap/support/notes/658744]
Regards.
Rajesh Narkhede -
Error Connect to database failed : sqlcode=-4008 in dev_w0
Hi all,
I have a testing ABAP ECC5 system (in Windows 2003, MaxDB 7.6 build 35).
After changing default passwords of DB users SAP<SID>, CONTROL, SUPERDBA using DBMGUI, I then run commands below to update new passwords in XUSER entries (according to SAP Note 39439):
- xuser -U DEFAULT -u SAP<SID>,<password> -d <database_name> -n <database_server> -S SAPR3 -t 0 -I 0 set
- xuser -U c -u CONTROL,<password> -d <database_name> -n <database_server> -S INTERNAL set
- xuser -U w -u SUPERDBA,<password> -d <database_name> -n <database_server> -S INTERNAL set
The SAP system now cannot be started successfully. In dev_w0, there is info. like below:
"Connect to database failed : sqlcode=-4008 (Unknown user name/password combination)."
Command "r3trans -d" returns 0.
In SAP Note 39439 I see that maybe I should update info. for OS user SAPService<SID>. But I don't know what "..." means in command "xuser -c <domain>\SAPService<SID> ..."
I searched SAP SDN & SAP Notes, but still cannot fix this.
Please guide me to update XUSER entries after changing passwords of DB users.
Regards,> I have a testing ABAP ECC5 system (in Windows 2003, MaxDB 7.6 build 35).
Just as additional info: your database version is ancient - I suggest upgrading to a newer release.
> In SAP Note 39439 I see that maybe I should update info. for OS user SAPService<SID>. But I don't know what "..." means in command "xuser -c <domain>\SAPService<SID> ..."
The SAP system runs under User SAPService<SID>, you're most likely logged on using <sid>adm, that's why your "R3trans -d" connect is successful.
You have to execute the same command for the entry DEFAULT also for user <DOMAIN>\SAPService<SID>, that's what the dots mean
Markus -
Code to connect to database in Webdynpro-- iviews
Hi All-
Could you let me know the code to connect to database
in WebDynPro-->iviews.
Regards,
CrisHi,
Here are the two ways of connecting to a database through coding:
////1////
Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver");
java.sql.Connection conn= java.sql.DriverManager.getConnection("jdbc:microsoft:sqlserver://<IP>:<port>;user=<abc>;password=<xyz>;database=<DB name>");
////2////
InitialContext initialContext = new InitialContext();
DataSource dataSource = (DataSource)initialContext.lookup("jdbc/SRI");
java.sql.Connection conn = dataSource.getConnection();
Regards
Srinivasan T -
How to find the number of users connected to database from OS level(Linux)
Hi All,
Could anyone know , how to find the number of users connected to database without connecting with sql*plus
is there any command to find it?
example we have 10 databases in one server, how to find the number of users connected to particular database without connecting to database(v$session)?
oracle version:- 10g,11g
Operating System:- OEL4/OEL5/AIX/Solaris
any help will be appreciated.
Thanks in advance.
Thank you.
Regards,
Rajesh.Excellent.
Tested, works as long as you set the ORACLE_SID first ( to change databases )
ps -ef | grep $ORACLE_SID | grep "LOCAL=NO" | awk '{print $2}' | wc -l
Thanks!
select OSUSER
from V$SESSION
where AUDSID = SYS_CONTEXT('userenv','sessionid')
and rownum=1;Best Regards
mseberg -
I am not able to connect to database in sql developer.how to do?
I downloaded sqldeveloper 1.5.4.59.40. iam not able to establish connection to database. Can anyone tell me ?
Have you created a database (or have one you connect to)?
Have you created the Net Service connections for SQL Developer to use?
Does SQL Developer have access to this Net Serviice name?
Have you created the connections from SQL Developer?
Can you post an error message?
See
<br>
Oracle Database FAQs
</br>
Maybe you are looking for
-
Print only drivers for windows xp
Does HP or anyone else have print-only drivers for the photosmart 1215 or deskjet 3915 printers? I tried to install two printers on my laptop and it has been a disaster!
-
Can I create a text box in Pages that can automatically scale vertically to fit the text inside? I'm trying to create a modular element for a template that someone can paste any amount of text into without having to manually change the vertical scale
-
Keyboard malfunction for some keys only
I'm using an HP G61-410EL laptop model for more than 1 year but suddenly the keyboard not functioning for some keys for B,N,Alt Gr,@..can anybody please advise me what to do?is it a hardware problem or a software problem for my keyboard?? thanks, jay
-
Disconnect to wireless when computer sleeps
When I get on the computer for internet after the HD/screen are asleep the wifi connection is lost. Sometimes it finds it and reconnects which takes 30-90 secs, but sometimes it will net find it and I have to sign on to the network. I have an older i
-
Hello, I am using solaris 10 and when i create new user I have to pass password that must start with number e.g 12solaris , it is not accepting solaris12 as password as displaying password must be alphanumeric.how can I cure this problem Message was