Connecting to Legacy AFP services

I can't seem to get this to work under Mountain Lion although it works fine under Lion. http://support.apple.com/kb/HT4700?viewlocale=en_US&locale=en_US
When I try Step 4, I receive the following error, The domain/default pair of (/Library/Preferences/com.apple.AppleShareClient, afp_disabled_uams) does not exist
I am attempting to connect to NetWare 6.5, SP8 using clear text.
OS X Mountain Lion (10.8.1)

Resolved this by connecting to an OS X 10.7 server in Step 3. In Lion I was able to connect to our NetWare server and complete the steps but not Mountain Lion.

Similar Messages

HT200160 Mountain Lion issue Connecting to legacy AFP services

I can't seem to get this to work under Mountain Lion although it works fine under Lion.
When I try Step 4, I receive the following error, The domain/default pair of (/Library/Preferences/com.apple.AppleShareClient, afp_disabled_uams) does not exist
I am attempting to connect to NetWare 6.5, SP8 using clear text.

Resolved this by connecting to an OS X 10.7 server in Step 3. In Lion I was able to connect to our NetWare server and complete the steps but not Mountain Lion.

Lion: Connecting to legacy (pre-Lion) AFP services - and Mac OS X (server)

After upgrading to MacOS X Lion, it was discovered that it was not possible to logon to Novell-shares and NAS-boxes (e.g. Qnap).
Here is a recipe that has been tested OK with the following combinations:
* Mac OS X Lion -> Novell shares
* Mac OS X Lion -> Mac OS X 10.5 server
* Mac OS X Lion -> Mac OS X Lion
Please note that the command-lines themselves must not have CR/NL-characters. Copy the commands to a text-editor and remove format-inserted CR/NL-characters.
Another note: Your logon will be less secure with these changes. Later when e.g. Novell and/or your NAS-box support native Lion-logon, then please remove the AppleShareClient-parameter changes again with the first block.
Recipe:
The following block can be skipped if you have not previously changed AppleShareClient-parameters:
sudo -s
chmod o+w /Library/Preferences
cd /Library/Preferences/
rm com.apple.AppleShareClient.plist*
! Restart
The following block makes it possible to logon to: (1) Novell-shares (2) Pre Lion Mac-OS-X-volumes - and possibly non-native Lion logon NAS-shares:
sudo -s
chmod o+w /Library/Preferences
defaults write /Library/Preferences/com.apple.AppleShareClient afp_host_prefs_version -int 1
! Restart
You now have to logon a real account (non-guest) on another Mac OS X Lion volume
to catalyst a creation of AppleShareClient-files. (See Apple-support-link) (Is this necessary?)
! instead?:
/bin/sleep 60
chmod o+w /Library/Preferences
defaults write /Library/Preferences/com.apple.AppleShareClient afp_disabled_uams -array "Cleartxt Passwrd" "MS2.0" "2-Way Randnum exchange"
defaults write /Library/Preferences/com.apple.AppleShareClient afp_disabled_uams -array "DHX2"
defaults write /Library/Preferences/com.apple.AppleShareClient afp_disabled_uams -array "DHCAST128"
chmod o-w /Library/Preferences
PS:
Possibly all volume-links may be deletes and recreated to use the new logon-parameters?
Sources for command-bricks:
OS X Lion: Connecting to legacy AFP services:
http://support.apple.com/kb/HT4700
AFP changes in OSX Lion:
http://www.novell.com/communities/node/13155/afp-changes-osx-lion
AFP support for DHX2 authentication mechanism on OES:
http://www.novell.com/support/search.do?cmd=displayKC&docType=kc&externalId=7008 683&sliceId=1&docTypeID=DT_TID_1_1
"/bin/sleep 60":
Making My NAS Work in Lion:
http://krypted.com/mac-os-x/making-my-nas-work-in-lion/
Example:
bash-3.2# chmod o+w /Library/Preferences
bash-3.2# cd /Library/Preferences/
bash-3.2# rm /Library/Preferences/com.apple.AppleShareClient.plist*
bash-3.2# chmod o-w /Library/Preferences
bash-3.2#
! Restart
Last login: Fri Aug 12 14:41:58 on console
$ sudo -s
Password:
bash-3.2# chmod o+w /Library/Preferences
bash-3.2# defaults read /Library/Preferences/com.apple.AppleShareClient afp_disabled_uams
2011-08-12 14:42:31.172 defaults[188:707]
The domain/default pair of (com.apple.AppleShareClient, afp_disabled_uams) does not exist
bash-3.2#
! Restart
Last login: Fri Aug 12 14:47:31 on console
$ sudo -s
Password:
bash-3.2# chmod o+w /Library/Preferences
bash-3.2# defaults write /Library/Preferences/com.apple.AppleShareClient afp_disabled_uams -array "Cleartxt Passwrd" "MS2.0" "2-Way Randnum exchange"
bash-3.2# defaults read /Library/Preferences/com.apple.AppleShareClient afp_disabled_uams(
    "Cleartxt Passwrd",
    "MS2.0",
    "2-Way Randnum exchange"
bash-3.2# defaults write /Library/Preferences/com.apple.AppleShareClient afp_disabled_uams -array "DHX2"
bash-3.2# defaults read /Library/Preferences/com.apple.AppleShareClient afp_disabled_uams
    DHX2
bash-3.2# defaults write /Library/Preferences/com.apple.AppleShareClient afp_disabled_uams -array "DHCAST128"
bash-3.2# defaults read /Library/Preferences/com.apple.AppleShareClient afp_disabled_uams
    DHCAST128
bash-3.2# chmod o-w /Library/Preferences
bash-3.2#
Also posted here:
Lion: Connecting to legacy (pre-Lion) AFP services - and Mac OS X (server):
http://forum.qnap.com/viewtopic.php?f=30&t=48143
http://forums.macrumors.com/showthread.php?p=13166617

hammer58 wrote:
Thanks for your response, but this all looks pretty complicated to me. I am not sure from this which lines I need to use and what I don't need.
What are CR/NL characters?
In plain text files carriage-return (CR) and new-line (NL) has:
LF, NL: decimal 10, hexadecimal 0x0A
CR: decimal 13, hexadecimal 0x0D
References:
http://en.wikipedia.org/wiki/Carriage_return
http://en.wikipedia.org/wiki/Line_feed
http://www.asciitable.com/
Especially:
http://en.wikipedia.org/wiki/Line_feed#Representations
Quote: "...
CR+LF: Microsoft Windows, DEC TOPS-10, RT-11 and most other early non-Unix and non-IBM OSes, CP/M, MP/M, DOS (MS-DOS, PC-DOS, etc.), Atari TOS, OS/2, Symbian OS, Palm OS
LF+CR: Acorn BBC spooled text output.
CR:   Commodore 8-bit machines, Acorn BBC, TRS-80, Apple II family, Mac OS up to version 9 and OS-9
LF:   Multics, Unix and Unix-like systems (GNU/Linux, AIX, Xenix, Mac OS X, FreeBSD, etc.), BeOS, Amiga, RISC OS, and others.
RS:   QNX pre-POSIX implementation.
http://en.wikipedia.org/wiki/Newline#Unicode
Quote:"...
The Unicode standard defines a large number of characters that conforming applications should recognize as line terminators:[3]
LF:   Line Feed, U+000A
VT:   Vertical Tab, U+000B
FF:   Form Feed, U+000C
CR:   Carriage Return, U+000D
CR+LF: CR (U+000D) followed by LF (U+000A)
NEL: Next Line, U+0085
LS:   Line Separator, U+2028
PS:   Paragraph Separator, U+2029
If you have Linux, classic Mac or Windows/DOS text files, and you want to convert their LF/CR-flavor to another, then TextWrangler can do it for you; choose new LF/CR-combination via bottom button of the text file window. TextWrangler can be downloaded for free - also via App Store.
TextWrangler:
http://www.barebones.com/products/textwrangler/

Mt Lion 10.8.5: can't connect to file server with legacy AFP - only that fileserver at hand

Hi!
I just discovered the hard way that I no longer can access the NAS on the office, using my iMac that is upgraded to 10.8.5
It seems to be an issue of "legacy AFP" no longer supported in 10.8
I found a KB, but the instructions tells me to connect to other AFC source, while editing Preferences. I only have this NAS over AFP in the office.
Can anyone help me with other ways of enabling legacy AFP on my office iMac?

Hi!
I just discovered the hard way that I no longer can access the NAS on the office, using my iMac that is upgraded to 10.8.5
It seems to be an issue of "legacy AFP" no longer supported in 10.8
I found a KB, but the instructions tells me to connect to other AFC source, while editing Preferences. I only have this NAS over AFP in the office.
Can anyone help me with other ways of enabling legacy AFP on my office iMac?

AFP service with duplicate connections

Hello,
I've got a 10.4.11 server in my school with ~40 clients (mixed old emac to current imac, tiger and leopard). Regardless of client type, they all seem to be connecting to the server with 2 'connections' listed in the AFP service details pane. I don't know if it's a problem, as such, just an oddity...
Any idea what would cause this?
thanks,
David Hoare

Server Admin is reporting connections, not clients. As a result you'll have one connection for each share mounted on the client. not just a list of the clients that are connected.
For example, if each user has a home directory mounted off the server (1 connection), and also connects to a shared media volume (1 connection) they will be listed with 2 connections in Server Admin.

How do I view a list of connections (Connected users) to a service like web or file services?

how do I view a list of connections (Connected users) to a service like web or file services? you used to be able to do this in Server Admin in 10.6 by lleft clicking on a service like file sharing and the clicking connections located towards the top of the server admin window. This seems to havedisappeared in Lion server and its a useful feature
any suggestions would be very welcome. Thank You.

I've found a way through Terminal for AFP and Mail:
https://discussions.apple.com/message/16155552#16155552

Need to restart AFP service daily

Hi,
A couple of days ago I verified and repaired disk permissions with Disk Utility on my Mac mini SLS. Now each morning users cannot see their shares on the network until I restart the AFP service. All the other services are working fine. What could be wrong with AFP? Any help for me?
Thanks in advance.
imacleo

Is there a particular reason that you needed AFP turned on, on each of the client machines? If you're using the mini as a file share there shouldn't be a need for each client machine to be turned on. Turning on file sharing in System Preferences for a local machine is not needed to connect to a server share. It's only needed to share local folders or drives.

Can I vpn to an afp service on the same machine?

I have an XServe running 10.4.11 with AFP, httpd, and the firewall service. I've configured the firewall to only allow connections to the file share from our local network. This works fine. I want to setup vpn service so users can connect to file share remotely. I've turned on vpn and configured it, and clients can connect. They receive unused static ips on our local network. However when I try to connect to the server afp service from the client I get no response, it times out. I read another thread here which indicated I cannot use the vpn service to connect to another service running at the same ip address (VPN working in reverse!?). OK that makes sense. So I thought about running VPN on the second network interface (XServe with two nics, different ips). However in reading the 10.4 Server manual it says it's not possible to run services on different network interfaces, all services run on all network interfaces. This matches what I'm seeing in Server Admin. So does that mean what I am trying to do is impossible using only one machine?

Regarding running both the vmserver and the vmmanager on the same machine - I have this running. Maybe not the best architectural decision but I only have one large server for my testing. I don't remember excatly what i did but I got inspired form the folloeing post in the forum Simple VM-Manager install . I also added more memory to the dom0 domain to enable the much higher memory usage because of the vmmanager running there.

RFC connection from SAP Data services to SAP ECC

We have data services set up in linux machine. I am trying to set up RFC connection between data services and SAP ECC.
From data management console after creating RFC connection i am getting "RFC_bad_connection" error message. Username , password, system number, hostname and client is working from SAP GUI and has all the authorizations. SAP gateway and service is name is correct.
Did anyone had similar issue and what was the solution. Do we have start the RFC connection from linux data services machine, i didn't see any sh executable to do so.
Thanks in advance for helping to solve the RFC connection issue.
Edited by: gupta sasha az on Dec 19, 2011 7:24 PM

I am new to SAP and we have just started work on Data Services.
I wanted to know the complete procedure as in how can I establish a connection between Data Services and ECC.
Thanks for your help and time.

The search request was unable to connect to the Search Service

I have upgraded from WSS 3.0 to SharePoint Foundation 2010. So far everything appears to be OK apart from my search.
When I attempt a search I get the following:
The search request was unable to connect to the Search Service.
I checked the Manage Database Update Status in Central Admin and noticed the following(an upgrade is required):
Also, I checked Manage Services on Server and noticed that the only search related service is 'SharePoint Foundation Help Search'.
If I go into Manage Service Applications and click new there is no option to add a search service.
Finally I tried PSConfig:
PS C:\Users\administrator.ACHESON> PSConfig.exe -cmd upgrade -inplace b2b -force
-cmd applicationcontent -install -cmd installfeatures
SharePoint Products Configuration Wizard version 14.0.6009.1000. Copyright (C) M
icrosoft Corporation 2010. All rights reserved.
Performing configuration task 1 of 6
Initializing SharePoint Products upgrade...
Waiting to get a lock to upgrade the farm.
Successfully initialized SharePoint Products upgrade.
Performing configuration task 2 of 6
Initiating the upgrade sequence...
Successfully initiated the upgrade sequence.
Performing configuration task 3 of 6
Registering SharePoint features...
Feature installation has determined that there are no new features that require
installation.
Successfully registered SharePoint features.
Performing configuration task 4 of 6
Installing the application content files...
Installing the SharePoint Central Administration Web Application content files..
Installing the SharePoint Web Application content files...
Successfully installed the application content files.
Performing configuration task 5 of 6
Upgrading SharePoint Products...
10.00%Failed to upgrade SharePoint Products.
An exception of type Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfig
urationTaskException was thrown. Additional exception information: The upgrade
command is invalid or a failure has been encountered.
Failed to upgrade SharePoint Products.
Total number of configuration settings run: 5
Total number of successful configuration settings: 4
Total number of unsuccessful configuration settings: 1
Successfully stopped the configuration of SharePoint Products.
Configuration of SharePoint Products failed. Configuration must be performed be
fore you use SharePoint Products. For further details, see the diagnostic log l
ocated at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\1
4\LOGS\PSCDiagnostics_10_9_2013_12_47_54_528_1859316720.log and the application
event log.
This is the warnings and errors that the log contained:
10/09/2013 12:48:16 10 WRN Found registry key HKEY_LOCAL_MACHINE\Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS\ComponentsToRegister, but the SubKeyCount is zero
10/09/2013 12:48:24 10 WRN Failed to add the service connection point for this farm
10/09/2013 12:48:24 10 WRN Unable to create a Service Connection Point in the current Active Directory domain. Verify that the SharePoint container exists in the current domain and that you have rights to write to it.
Microsoft.SharePoint.SPException: The object LDAP://CN=Microsoft SharePoint Products,CN=System,DC=acheson-glover,DC=com doesn't exist in the directory.
at Microsoft.SharePoint.Administration.SPServiceConnectionPoint.Ensure(String serviceBindingInformation)
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
10/09/2013 12:48:40 10 ERR The exclusive inplace upgrader timer job failed.
10/09/2013 12:48:40 10 ERR Task upgrade has failed with a PostSetupConfigurationTaskException An exception of type Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException was thrown. Additional exception information: The upgrade command is invalid or a failure has been encountered.
Failed to upgrade SharePoint Products.
10/09/2013 12:48:40 10 ERR An exception of type Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException was thrown. Additional exception information: The upgrade command is invalid or a failure has been encountered.
Failed to upgrade SharePoint Products.
Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException: Exception of type 'Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException' was thrown.
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
10/09/2013 12:48:40 10 ERR Task upgrade has failed
10/09/2013 12:48:40 1 ERR Task upgrade SharePoint Products failed, so stopping execution of the engine
10/09/2013 12:48:40 1 ERR Failed to upgrade SharePoint Products.
An exception of type Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException was thrown. Additional exception information: The upgrade command is invalid or a failure has been encountered.
Failed to upgrade SharePoint Products.
Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException: Exception of type 'Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException' was thrown.
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
10/09/2013 12:48:41 1 ERR One or more configuration tasks has failed or some tasks were not run
10/09/2013 12:48:41 1 ERR One or more configuration tasks has failed to execute
10/09/2013 12:48:41 1 ERR Configuration of SharePoint Products failed. Configuration must be performed in order for this product to operate properly. To diagnose the problem, review the extended error information located at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS\PSCDiagnostics_10_9_2013_12_47_54_528_1859316720.log, fix the problem, and run this configuration wizard again.
10/09/2013 12:48:41 1 ERR Post setup configuration was not run successfully when using the command line task driver module
How do I resolve this?
Cheers
Paul

Hi,
SharePoint Foundation the search service should be installed by default. It's not the same as with 2010 Standard or Enterprise where you can create a "Service Application" for it.
Follow this article to configure SharePoint Foundation Search:
http://plexhosted.blogspot.com/2011/11/how-to-configure-sharepoint-foundation.html
Meanwhile, here is a thread which discusses the similar question:
Configuration of SharePoint Foundation 2010 Search
http://social.technet.microsoft.com/Forums/sharepoint/en-US/af57728f-ae20-477b-8c67-2b594a1a72de/configuration-of-sharepoint-foundation-2010-search?forum=sharepointadminprevious
Thanks.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

My iPhone 5S has not connected to 4G LTE service in the last few days? Is there an outage/issue with 4G in my area (Pittsburgh) or is this a device specific issue?

My iPhone 5S has not connected to 4G LTE service in the last few days? Is there an outage/issue with 4G in my area (Pittsburgh) or is this a device specific issue?

JHblues Let's get your data working again. There are not any reported issues in the area. Try this step: http://vz.to/1kUSSk2
Sheritah_vzw
Follow us on Twitter
@VZWSupport

An error occurred while trying to connect to a Web service, when InfoPath web enabled form loads.

Hi Everyone,
I am getting an error message: An error occurred while trying to connect to a web service, when my InfoPath form tries to load. The last few days, it only spits this error message in the morning and around 12pm-1pm it resolves itself and the form loads
fine the rest of the day, oddly enough.
A few things about my form:
1). It is web enabled
2). The form submits to a form library on the SP server
3). I use the UserProfileService data connection in the form to auto-populate a few fields
4). I use a udcx file with correct language stored in the root of the site collection in the data connection library
5). The form has been working fine until a few days ago
I noticed while in Central Administration, that the User Profile Service Synchronization is Stopped. Not sure if this is causing some or all of the problem. If I need to start it I will need to contact my farm administrator to do this, since I do not
have the service account information.
Also, I looked thru the log files on the SharePoint server and found the following by searching for the Correlation ID shown when the error comes up, I won't put in everything just the important messages.
Schema file was already loaded: BuiltInActiveXControls.xsd
FormServer Partial Trust - Proxy operation invoked in the SHIM process.
FormServer Partial Trust - Invoking proxy operation for Web service adapter failed with exception Operation is not valid due to the current state of the object. for Url=https://<SP URL>/_vti_bin/UserProfileService.asmx
Data adapter failed during OnLoad: The custom code in the form cannot be run. This functionality may be deactivated on the server. For more information, contact the server farm administrator.
The following query failed: GetUserProfileByName (User: , Form Name: Expense Report, IP: , Connection Target: <SP URL>/Data Connections/GetUserProfileByName.udcx, Request: , Form ID: urn:schemas-microsoft-com:office:infopath:Expense-Report:-myXSD-2014-04-11T21-06-32
Type: DataAdapterException, Exception Message: The custom code in the form cannot be run. This functionality may be deactivated on the server.

Hi B.,
You are on the right track. I recommend that you first get the User Profile Synchronization Service started because that itself could be the root cause of the issue.
If that doesn't fix it then focus your attention on the GetUserprofileByName data connection. I always use my secure store ID for this connection. I add the ID by editing the udcx file and then publishing it again.
Hope this helps.
Daniel Christian (MCTS)

Error: there is a problem connection to the GPRS service in your registered home network, error trying to make data connection. this may be casued by a voice call, a wired activesync connection or inncorrect network setting

like 2 weeks ago i called in to att to see how much is the data plan and it would end up costing $30.
so i was like screw that. well they figured that i got a new phone replacing the LG shine. so they asked
for to call this number so they can recieve data which would updated the system that i have a plam treo 750.
ever since this conflict i can't send picture messages. i get that problem. everytime i attempt to send a picture
i recieve this.
- there is a problem connection to the GPRS service in your registered home network.
- then i get a test that says error trying to make data connection. this may be casued by a voice call,
a wired activesync connection or inncorrect network setting.
please someone help me.
btw. hard reset and soft reset did not work for me.
Post relates to: Treo 750 (AT&T)

problem fix, i had to call in. customer serivce. and when i called to ask about the plan. they blocked it. so i had to unblock my internet.
Post relates to: Treo 750 (AT&T)

Certificate error while connecting to multiple web service

I am having a web service test client through which I can connects and get reports from multiple web services.
In Development unix box, we are using "self-signed certificate" using keystore type JKS. In Production server, we are using certificate from CA.
The web service is running in Development and in Production.
Now I have developed single test client with a drop down selection for different web services. For example, if we select "Development", the request will go the development web service and if we select "Production", the request will go to Production web service.
Now while connecting to Develpment service, we are settings the below certificates details Because we are using the self signed certificate.
System.setProperty("javax.net.ssl.keyStore",keyStoreFileLocation);
System.setProperty("javax.net.ssl.keyStorePassword",keyStorePassword);
System.setProperty("javax.net.ssl.keyStoreType", keyStoreType);
System.setProperty("javax.net.ssl.trustStoreType",trustStoreType);
System.setProperty("javax.net.ssl.trustStore",trustStoreFileLocation);
System.setProperty("javax.net.ssl.trustStorePassword",trustStorePassword);
I am clearing the System properties using the System.clearProperty() while pointing to Production service. because in Production we are using the CA certificate from Thawte so these details are not required at all and our JRE (java 5) is pre configured to support that CA certificate.
I am using Resin-2.1.12, axis1.2 and java5.
Now the problem is
(1) for the first time, when I send the request to Production Service URL, the report gets generated. For the next time when we are running against Development, it's giving below certificate error.
sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
(2) Now restart resin and run the test client against Developemnt service URL, here report gets generated and for the next time, run the test client against Production, it's giving the certificate error.
So for the 2nd request, it always gives the error irrespective of the web service instance selected.
Please suggest ....thanks in advance.

Hi ,
No, due to the issue is happening only on one computer.
The error "(401) Unauthorized" usually indicates that the connection has been established but the permission check fails. InfoPath Form Services uses the application pool identity of the web
application to connect to resources.
Does the account which login the computer have permission to connect to User Profile Service Application?
For a workaround, you can go to IIS Manager , set the User Profile Application Pool to Anonymous Access and try again.
Also you can have a look at the blog:
http://sharepointconnoisseur.blogspot.in/2011/04/how-to-resolve-401-unauthorized-error.html
Best Regards,
Eric
Eric Tao
TechNet Community Support

An unexpected exception while resolving a new connection to an Adobe Service.

Hi
i am new to LC and trying to generate pdf from doc using java API . while doing this i am geting error an unexpected exception while resolving a new connection to an Adobe Service.what is exact reason of this error.from.
thanks in advance
N1223

Hi
i am new to LC and trying to generate pdf from doc using java API . while doing this i am geting error an unexpected exception while resolving a new connection to an Adobe Service.what is exact reason of this error.from.
thanks in advance
N1223

Connecting to Legacy AFP services

Similar Messages

Maybe you are looking for