Connecting to Mainframe datacom tables using Java code

Hi,
I want to connect to the mainframe datacom tables using javacode. Can anyone help me out.
Thanks,
Mahesh.

I don't have any sample code, but if you have bluetooth software on your computer, you can setup the serial port profile between your computer and cellphone, and treat your cellphone as a normal modem.
You can then look at the javacomms api, which should help you.
http://java.sun.com/products/javacomm/

Similar Messages

  • How to change InputField background color using Java Code

    Hi,
    In my application use will enter some set of Cost Centers in a table and submits request.
    In return i will get a list of invalid cost centers which i need to display in a table with input field
    In that table all cost centers will displayed, but invalid cost centers should be highlighted or background color should some other color. like red or yellow.
    Is it possible using java code to change a input field color.
    Please help me.
    Thanks

    Hi,
        declare a error message in message pool and declare a method say "checkCostCenters " and in this method, u can check whether it is a valid cost center .. if it is invalid cost center , then throw the erro message using the below code :
    wdComponentAPI.getMessageManager().reportContextAttributeMessage(
                        inputfieldattibutePointer, IMessageProgramPlanComp.ur error message,
                        new Object[] );
    for getting pointer and label use the below code:
    IWDAttributePointer inputfieldPointer = URNODEELEMENTElement
                        .getAttributePointer(URNODEELEMENT.ATTRIBUTENAME);
              String inputfieldLabel = wdContext.nodeURVALUENODE.getNodeInfo()
                        .getAttribute(URNODELEMENT.ATTRIBUTE).getSimpleType()
                        .getFieldLabel();
    hope it helps..
    Thanks and Regards

  • How to print/list all the groups/users present in Weblogic using Java code

    Hi,
    Weblogic version : 11.1.1.5
    How to print/list all the groups/users present in Weblogic using Java code
    I want to make a remote connection to Weblogic server and print all the users/groups present in it.
    I have gone through the below mentioned site, but I cannot use the same approach since most of the API' are deprecated for example "weblogic.management.MBeanHome;"
    http://weblogic-wonders.com/weblogic/2010/11/10/list-users-and-groups-in-weblogic-using-jmx/
    Thanks in advance,
    Edited by: 984107 on 05-Feb-2013 05:26
    Edited by: 984107 on 05-Feb-2013 22:59

    see this http://www.techpaste.com/2012/06/managing-user-groups-wlst-scripts-weblogic/
    Hope this helps.

  • Iterate through all the records in a table using Java API

    Hi All,
    What is the easiest way to iterate through all the records in a given table using Java API? I cannot find any methods that will return all records in a table and the only way I can use is to perform a free form search with a condition that is always true. The code works but is pretty ugly. Is there an alternative to this approach?
    Thanks!
    Kenny

    Hi Kenny,
    You can construct a new Search object with your table's code name, a new ResultSetDefinition object for your table and just execute this search using the GetResultSet method of CatalogData.
    Please look at the following code:
    Search search = new Search(<code name of your table>);
    ResultSetDefinition rsd = new ResultSetDefinition(<code name of your table>);
    rsd.AddField<code name of a field>);
    rsd.AddField(<code name of a field>);
    String sortField = <code name of your sort field>;
    boolean sortAscending = true;
    int page = 0; //page number
    A2iResultSet rs = <your CatalogData object>.GetResultSet(search, rsd, sortField, sortAscending, page);
    for (int i = 0; i < rs.GetRecordCount(); i++)
        Value fieldValue = rs.GetValueAt(i, <code name of a field>);
    Hope this helps,
    Nir
    PS - I really recommend you to start using the new API, as it is much more efficient and straight-forward.

  • How to Invoke bpel process which is deployed in weblogic using java code

    Hi
    I want to invoke a BPEL Process which is deployed in Weblogic server using Java code. Please provide me the code snnipet which will be used to connect and then invoke a BPEL Process.

    The simple way would be creating a java client to consume the SOAP webservice interface exposed by the bpel process.
    If you have Oracle Service Registry you can also use UDDI to discover the endpoint at runtime.
    But you can also use direct binding to do that.
    If you search on internet you will find many blog entries about this as well as many related posts here on OTN.
    I can't suggest a specific one, but looking on Google this one seems quite ok: Managing Oracle SOA Environment [10g/11g]: Invoking SOA11g Composite Using Direct Binding Invocation API

  • Benefits of the way using Java codes in Jdev 11.1.1.5

    Hi,
    I know there can be 2 ways to do these:
    retrieve the file to the DB or take the file from the DB.
    1)     1st way is to call DB procedure by passing parameter to it from the java class
    2)     2nd way is use java codes to directly do that
    What is the benefit of using the 2nd way? How about its details?

    Hua,
    I don't see a connection between retrieve the file to the DB or take the file from the DB. and a stored procedure "getTestData(?, ?)".
    As long as Frank (who's crystal ball is much bigger then mine) can guess what you really want to ask, I would appreciate a full use case which we all can understand.
    Timo

  • How to trigger tree table from java code

    Trying to trigger tree table from java code, using :
    AdfFacesContext.getCurrentInstance().addPartialTarget(treeTableComponent);
    But its not working. Am i using the correct approach?

    Sorry for the incomplete information,
    I have a tree table in a region and that region i am including inside a jspx file. In the region i have one popup and based on the input taken from the popup i want to trigger the table to show the data.
    For that i am trying :
    FacesContext context = FacesContext.getCurrentInstance();
    UIComponent component = findComponent( context.getViewRoot(),"treeTableID");
    if(component != null){
    AdfFacesContext.getCurrentInstance().addPartialTarget(component);
    public static UIComponent findComponent(UIComponent base, String id)
    if (id.equals(base.getId()))
    return base;
    UIComponent children = null;
    UIComponent result = null;
    Iterator childrens = base.getFacetsAndChildren();
    while (childrens.hasNext() && (result == null))
    children = (UIComponent) childrens.next();
    if (id.equals(children.getId()))
    result = children;
    break;
    result = findComponent(children, id);
    if (result != null)
    break;
    return result;
    Model is getting data before i use : AdfFacesContext.getCurrentInstance().addPartialTarget(component);
    But table is not calling getData() in model to show the populated data on UI.

  • How to get the values from struct data type using java code..?

    Hi ,
    I am newer to java.
    we are using oracle database.
    How to get the data from struct data type using java code.
    Thanks in Advance.
    Regards,
    kumar

    Hi Rajeev,
    To retrieve a FilterContainer you will need to traverse the report structure:
    ReportStructure boReportStructure = boDocumentInstance.getStructure();
    ReportContainer boReportContainer = (ReportContainer) boReportStructure.getReportElement(0);
    FilterContainer boFilterContainer = null;
    if (boReportContainer.hasFilter()) {
         boFilterContainer = boReportContainer.getFilter();
    } else {
         boFilterContainer = boReportContainer.createFilter(LogicalOperator.AND);
    Calling boDocumentInstance.getStructure() will retrieve the entire structure for the document.
    Calling boReportStructure.getReportElement(0) will retrieve the structure for the first report of the document.
    Hope this helps.
    Regards,
    Dan

  • How to change the properties of a directory using java code

    Hai All,
    I need to change the properties of directory( websharing).
    Can i do this using java code.
    Regards,
    Charan

    I need to change the properties of
    directory( websharing).
    an i do this using java code.Depends on whether the server has a Java API to do it. Most likely it hasn't.

  • How to transfer data in change log table of dso to z-table using abap code

    Hi  can you please explain me how to transfer data in change log table of dso to z-table using abap code ,with out using Function module concept

    PROGRAM NAME:   ZBW_DELTA_TO_GSTAR                                 **
    report ZBW_DELTA_TO_GSTAR no standard page heading
                                     line-size 120
                                     line-count 75
                                     message-id ZBW_MSG_CLS.
    tables:   ZGIV_DLTA_EBV_BB,
              ZGIV_DLTA_EM2_BL,
              ZGIV_DLTA_EM2_BK.
    Selection Screen Definitions
    SELECTION-SCREEN: BEGIN OF BLOCK INNER WITH FRAME TITLE TEXT-001.
    SELECTION-SCREEN: SKIP 1.
    PARAMETERS:       EBVBB RADIOBUTTON GROUP ROLL,
                      EM2BL RADIOBUTTON GROUP ROLL,
                      EM2BK RADIOBUTTON GROUP ROLL.
    SELECTION-SCREEN: END OF BLOCK INNER.
    Data:  WS_UPDATE_FLAG  Type C,
           UCounter(9)      Type N,
           ICounter(9)      Type N.
    DATA:  T_ZGIV_DLTA_EBV_BB Type Standard Table of ZGIV_DLTA_EBV_BB,
           s_ZGIV_DLTA_EBV_BB LIKE line of T_ZGIV_DLTA_EBV_BB.
    DATA:  T_ZGIV_DLTA_EM2_BK Type Standard Table of ZGIV_DLTA_EM2_BK,
           s_ZGIV_DLTA_EM2_BK LIKE line of T_ZGIV_DLTA_EM2_BK.
    DATA:  T_ZGIV_DLTA_EM2_BL Type Standard Table of ZGIV_DLTA_EM2_BL,
           s_ZGIV_DLTA_EM2_BL LIKE line of T_ZGIV_DLTA_EM2_BL.
    Standard Internal Tables - Describe usage.
    data: begin of i_AEPSD_O0140 occurs 0.
            include structure /BIC/AEPSD_O0140.
    data: end of i_AEPSD_O0140.
    data: begin of i_AEPSD_O0240 occurs 0.
            include structure /BIC/AEPSD_O0240.
    data: end of i_AEPSD_O0240.
    data: begin of i_AEPSD_O0340 occurs 0.
            include structure /BIC/AEPSD_O0340.
    data: end of i_AEPSD_O0340.
    data: begin of i_GIV_DLTA_EBV_BB occurs 0.
            include structure ZGIV_DLTA_EBV_BB.
    data: end of i_GIV_DLTA_EBV_BB.
    data: begin of i_GIV_DLTA_EM2_BK occurs 0.
            include structure ZGIV_DLTA_EM2_BK.
    data: end of i_GIV_DLTA_EM2_BK.
    data: begin of i_GIV_DLTA_EM2_BL occurs 0.
            include structure ZGIV_DLTA_EM2_BL.
    data: end of i_GIV_DLTA_EM2_BL.
    Miscellaneous Program Variables and Constants.
    TOP-OF-PAGE
    top-of-page.
    START-OF-SELECTION
    start-of-selection.
      Clear: i_GIV_DLTA_EBV_BB,
             i_GIV_DLTA_EM2_BK,
             i_GIV_DLTA_EM2_BL,
             UCounter, ICounter.
      IF EBVBB = 'X'.
        PERFORM 100_EXTRACT_EBV_BB_DELTA_RECS.
      ELSEIF EM2BK = 'X'.
        PERFORM 100_EXTRACT_EM2_BK_DELTA_RECS.
      ELSE.
        PERFORM 100_EXTRACT_EM2_BL_DELTA_RECS.
      ENDIF.
    FORM 100_EXTRACT_EBV_BB_DELTA_RECS
    FORM 100_EXTRACT_EBV_BB_DELTA_RECS.
      Refresh:   i_AEPSD_O0140,
                 i_GIV_DLTA_EBV_BB.
      Clear:      UCounter, ICounter, s_ZGIV_DLTA_EBV_BB .
      Select * From /BIC/AEPSD_O0140
        Into TABLE i_AEPSD_O0140.
      IF SY-Subrc = 0.
        LOOP AT i_AEPSD_O0140.
          MOVE-CORRESPONDING i_AEPSD_O0140 TO s_ZGIV_DLTA_EBV_BB.
          MOVE SY-DATUM to s_ZGIV_DLTA_EBV_BB-create_dt.
          INSERT ZGIV_DLTA_EBV_BB FROM s_ZGIV_DLTA_EBV_BB.
          IF SY-Subrc = 0.
            ICounter = ICounter + 1.
          ELSE.
            UPDATE ZGIV_DLTA_EBV_BB FROM  s_ZGIV_DLTA_EBV_BB.
            IF SY-Subrc = 0.
              UCounter = UCounter + 1.
            ELSE.
              Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
            ENDIF.
          ENDIF.
        ENDLOOP.
      ENDIF.
    ENDFORM.                    "100_EXTRACT_EBV_BB_DELTA_RECS
    FORM 100_EXTRACT_EM2_BK_DELTA_RECS
    FORM 100_EXTRACT_EM2_BK_DELTA_RECS.
    Refresh:   i_AEPSD_O0240,
               i_GIV_DLTA_EM2_BK.
      Clear:      UCounter, ICounter, s_ZGIV_DLTA_EM2_BK .
      Select * From /BIC/AEPSD_O0240
        Into TABLE i_AEPSD_O0240.
      IF SY-Subrc = 0.
        LOOP AT i_AEPSD_O0240.
          MOVE-CORRESPONDING i_AEPSD_O0240 TO s_ZGIV_DLTA_EM2_BK.
          MOVE SY-DATUM to s_ZGIV_DLTA_EM2_BK-create_dt.
            INSERT ZGIV_DLTA_EM2_BK FROM s_ZGIV_DLTA_EM2_BK.
          IF SY-Subrc = 0.
            ICounter = ICounter + 1.
          ELSE.
            UPDATE ZGIV_DLTA_EM2_BK FROM  s_ZGIV_DLTA_EM2_BK.
            IF SY-Subrc = 0.
              UCounter = UCounter + 1.
            ELSE.
              Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
            ENDIF.
          ENDIF.
        ENDLOOP.
      ENDIF.
    ENDFORM.                    "100_EXTRACT_EM2_BK_DELTA_RECS
    FORM 100_EXTRACT_EM2_BL_DELTA_RECS
    FORM 100_EXTRACT_EM2_BL_DELTA_RECS.
    Refresh:   i_AEPSD_O0340,
               i_GIV_DLTA_EM2_BL.
      Clear:      UCounter, ICounter, s_ZGIV_DLTA_EM2_BL .
      Select * From /BIC/AEPSD_O0340
        Into TABLE i_AEPSD_O0340.
      IF SY-Subrc = 0.
        LOOP AT i_AEPSD_O0340.
          MOVE-CORRESPONDING i_AEPSD_O0340 TO s_ZGIV_DLTA_EM2_BL.
          MOVE SY-DATUM to s_ZGIV_DLTA_EM2_BL-create_dt.
            INSERT ZGIV_DLTA_EM2_BL FROM s_ZGIV_DLTA_EM2_BL.
          IF SY-Subrc = 0.
            ICounter = ICounter + 1.
          ELSE.
            UPDATE ZGIV_DLTA_EM2_BL FROM  s_ZGIV_DLTA_EM2_BL.
            IF SY-Subrc = 0.
              UCounter = UCounter + 1.
            ELSE.
              Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
            ENDIF.
          ENDIF.
        ENDLOOP.
      ENDIF.
    ENDFORM.                    "100_EXTRACT_EM2_BL_DELTA_RECS
    END-OF-SELECTION
    end-of-selection.
      perform D1000_REPORT_DATA.
    D1000_REPORT_DATA
    form D1000_REPORT_DATA.
    *Display the title of the program
      write: /25 SY-TITLE.
      skip.
    Diaplay the details of the user and time
      write: /1 'Executed by', 15 SY-UNAME, 30 'Date',
      38 SY-DATUM, 53 'Time', 60 SY-UZEIT.
      skip 2.
      write: /  'Delta Records have been extracted  ',
             /   'Updates : ', UCounter,
             /   'Inserts : ', ICounter.
      skip.
      skip 3.
      write: /20 'End of the report'.
    endform.                                           "D1000_REPORT_DATA
    chgeck it out this also may hep you

  • How to extract data from info cube into an internal table using ABAP code

    HI
    Can Anyone plz suggest me
    How to extract data from info cube into an internal table using ABAP code like BAPI's or function modules.
    Thankx in advance
    regds
    AJAY

    HI Dinesh,
    Thankq for ur reply
    but i ahve already tried to use the function module.
    When I try to Use the function module RSDRI_INFOPOV_READ
    I get an information message "ERROR GENERATION TEST FRAME".
    can U plz tell me what could be the problem
    Bye
    AJAY

  • How to dynamically configure JPA setting at runtime using java code?

    Hi,
    I am new to EJB 3.0 and JPA. I am trying to help my company to deploy the use of JPA in EJB3.0. Currently, i am trying out with OpenJPA in IBM Webshpere Application Server 7.0. We have four different WAS servers running for testing, system integration testing, user testing and production respectively, and in each region, the configurations for data source, JDBC username and password, schema, etc are different. So i think i would need to configure the JPA setting during runtime using Java code that determines which is the environment. And apparently i am stuck with the limited knowledge i have.
    1) I understand that i could override the JDBC in the persistence xml by creating entity manager using entity manager factory. But is it possible that i do similar thing by using inejction of persistence context on entity manager to obtain a container managed entity manager?
    2) Alternatively, it is possible to create multiple persistence unit in the XML and inject different PU to the entity manager, am i right? But how to inject dynamically since @PersistenceContext(unitName="xxx") only accepts constant declaration.
    3) Is it possible that the JDBC username and password are read from properties file?
    Thanks for your help in advance!

    Hi
    Thanks for the reply.
    Are you saying that i have to configure the data source authentication to the backend DB2 using the JAAS-J2C? Correct me if i am mistaken. I guess i am unable to do so as the application server setup only contains one data source, and the server hosted a number of applications. Every applications has their own JDBC username and password supply to the data source (the ID supplied at the DB2 side will decide which resource can access) and thus, i have to supply the username and password at runtime. Talked to the server guy and seems that it is not feasible to have seperate datasource for each applications as considered to the volume of applications hosted inside the server.
    Any suggestion?

  • Read an excel file using java code

    Hi,
    I want to create an excel file on the client machine based on the personal details entered on the web page. And I want to save the file on the client machine in the form of CSV. Then I want to read the contents of the spreadsheet using Java Code from the using servlets. Can I read the contents of the file directly from the client machine or do i need to save the file on the server and then read the contents of it. Please help me solve this.

    Hi,
    I want to create an excel file on the client machine
    based on the personal details entered on the web
    page. And I want to save the file on the client
    machine in the form of CSV. Then I want to read the
    contents of the spreadsheet using Java Code from the
    using servlets. Can I read the contents of the file
    directly from the client machine or do i need to save
    the file on the server and then read the contents of
    it. Please help me solve this.As stated I am rather certain that is impossible.
    Servers don't access the file systems of client machines.

  • Creating a folder in current workspace using java code

    Hi Experts,
    I need to create a folder and some file in the workspace of NWDS user. Can someone please suggest how can i find out the workspace of user using JAVA code.
    IWorkspaceRoot is not working in NWDS.
    Regards
    Pranav

    Hi Pranav,
    Tell me if you want to create this folder at run time or in NWDS while developing application.
    If you want to create it at the time of development just change your perspective to Java perspective and from there you can see the entire project structure and from there you can create desired files / folders.
    Ninad

  • How do I produce an excel file using java code

    How do i produce an excel file using java code.
    If it is possible would ne one have ne source code as an example.
    I have tried looking up information on outputing the information to a *.csv file but unfortunality i have had no luck in finding any information. To be exact ne source code.
    Thanks
    Lee

    That's what I use and I'd be the first to admit that it's very messy. But it works. Go use Google and see what else you can find.

Maybe you are looking for