Connecting to multi databases from Oracle Forms

I am trying to connect to 2 databases from my form. The primary
connection is to a datbase where reports information(i.e. Report
name,parameters) is saved. When the form runs and user picks a
report to run, i want to change connection to a different
database which reports runs against. I am using Forms6.0 against
8I database.
Can any one help ??
Thanks

Database links are the only answer if you need distributed
transactions.
If you only want to access several different databases without
transaction coordination between those, then, you may use the
facilities of the EXEC_SQL built-in package.

Similar Messages

ERROR while connecting to Netezza Database from oracle 10g via dblink.

Gurus,
We are trying to connect to Netezza DB from oracle 10g DB.. We successfully establised ODBC connection but unable to retrieve data over the dblink connected from oracle to Netezza. We get this error.. Please HELP ASAP!!!!!!!!
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
Server and/or port attributes are empty {HY000,NativeErr = 33}

Manik wrote:
We are trying to connect to Netezza DB from oracle 10g DB.. We successfully establised ODBC connection but unable to retrieve data over the dblink connected from oracle to Netezza. We get this error.. Please HELP ASAP!!!!!!!!
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
Server and/or port attributes are empty {HY000,NativeErr = 33}Always test ODBC client connectivity on the Oracle server to the remote and foreign database, first. Use the isql ODBC client command line interface (as the oracle or grid o/s user).
If this does not work, then Oracle HSO will also not work.
Once you have confirmed that this is working, then configure the HSO service for Oracle.
If that fails, enables ODBC client tracing for that HSO service (in the init file for that service) to see exactly what ODBC calls Oracle is making and which of these are failing.

Connecting MS-Access database with Oracle Forms

Hai,
Can any one suggest as to how I can connect MS-Access database
with Oracle Developer Forms. What is the procedure ? Suggest me
if I need to install any drivers. Waiting for an early reply.
Warm Regards,
Raghav.
email:[email protected]

Not possible as far as I know.
Probably because ODBC itself (the defined interface) doesn't support it.
There is a commercial MS Access (java only) driver that might support it.

Error while connecting to Access Database from Oracle

Dear All,
I'm trying to connect Oracle 9i to Access Database.
but im getting the below error while executing query.
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
NCRO: Failed to make RSLV connection
ORA-02063: preceding 2 lines from MYSQLi did the following thing through to connect the database.
1) First i made odbc driver called ODBC1
2) I create the following file on oracle server C:\oracle\ora9I\hs\admin\initodbc1.ora
i edit the below thing in initodbc1.ora
HS_FDS_CONNECT_INFO =ODBC1
HS_FDS_TRACE_LEVEL = ON3) I made some changes in sqlnet.ora
SQLNET.AUTHENTICATION_SERVICES= NONE
before it was *NTS*4) Below are the entries in tnsnames.ora i changed the port from 1521 to 1522 cos 1521 already exists.
ODBC1.TADAWI.LOC =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1522))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = ODBC1)
ODBC1.WORLD =
(DESCRIPTION =
     (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.251) (PORT = 1522)
(CONNECT_DATA =
      (SID = ODBC1)
(HS=OK)
)5) Listener file code
ODBC1 =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1522))
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1521))
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = C:\oracle\ora9I)
      (PROGRAM = extproc)
    (SID_DESC =
      (GLOBAL_DBNAME = orcl)
      (ORACLE_HOME = C:\oracle\ora9I)
      (SID_NAME = orcl)
     (SID_DESC =
      (PROGRAM = hsodbc)
      (ORACLE_HOME = C:\oracle\ora9I)
      (SID_NAME = ODBC1)
)6) after that i created
SQL> CREATE DATABASE LINK MYSQL CONNECT TO XTRACK IDENTIFIED BY XTRACK USING 'ODBC1.WORLD'
Database link created.7) Listener Status
LSNRCTL for 32-bit Windows: Version 9.2.0.1.0 - Production on 04-MAR-2012 21:26:16
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=admin-amc)(PORT=1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 32-bit Windows: Version 9.2.0.1.0 - Production
Start Date                04-MAR-2012 20:52:33
Uptime                    0 days 0 hr. 33 min. 44 sec
Trace Level               off
Security                  OFF
SNMP                      OFF
Listener Parameter File   C:\oracle\ora9I\network\admin\listener.ora
Listener Log File         C:\oracle\ora9I\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=admin-amc.tadawi.loc)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC2ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=admin-amc.tadawi.loc)(PORT=8080))(Presentation=HTTP)(Session=RAW))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=admin-amc.tadawi.loc)(PORT=2100))(Presentation=FTP)(Session=RAW))
Services Summary...
Service "ODBC1" has 1 instance(s).
Instance "ODBC1", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orcl" has 2 instance(s).
Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfullyi did exactly what documentation says and it will not through any error but atlast when i try to access the access database tables it give me the below error
SELECT * FROM DBO_COMPANY@MYSQL
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
NCRO: Failed to make RSLV connection
ORA-02063: preceding 2 lines from MYSQLi'm using Oracle9i Enterprise Edition Release 9.2.0.1.0 any help will appreciate.
Regards
Moazam
Edited by: Moazam Shareef on Mar 4, 2012 10:25 AM

first of all thanks for your support Mr. Kgronau
I did what u said but still its giving me below error.
SQL> SELECT * FROM DBO_PATINS@MYSQL
2 ;
SELECT * FROM DBO_PATINS@MYSQL
ERROR at line 1:
ORA-12154: TNS:could not resolve service namei re-check the service, and restart the listener as you said below are the logs could you help me to solve this issue plz.
TNSNAMES.ORA
# TNSNAMES.ORA Network Configuration File: C:\oracle\ora9I\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORCL.TADAWI.LOC =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = orcl)
ODBC1 =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1522))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = ODBC1)
INST1_HTTP.TADAWI.LOC =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = SHARED)
      (SERVICE_NAME = MODOSE)
      (PRESENTATION = http://HRService)
EXTPROC_CONNECTION_DATA.TADAWI.LOC =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)
)LISTENER.ORA
# LISTENER.ORA Network Configuration File: C:\oracle\ora9I\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1521))
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))
ODBC1 =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1522))
SID_LIST_ODBC1 =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = ODBC1)
      (ORACLE_HOME = C:\oracle\ora9I)
      (PROGRAM = hsodbc)
    (SID_DESC =
      (GLOBAL_DBNAME = ODBC1)
      (ORACLE_HOME = C:\oracle\ora9I)
      (SID_NAME = ODBC1)
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = C:\oracle\ora9I)
      (PROGRAM = extproc)
    (SID_DESC =
      (GLOBAL_DBNAME = orcl)
      (ORACLE_HOME = C:\oracle\ora9I)
      (SID_NAME = orcl)
)then i restart both listener entries (ie lsnrctl start ODBC1 and lsnrctl start ) and both are running fine without any error below are the status.
LSNRCTL for 32-bit Windows: Version 9.2.0.1.0 - Production on 05-MAR-2012 18:42:09
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=admin-amc)(PORT=1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 32-bit Windows: Version 9.2.0.1.0 - Production
Start Date                05-MAR-2012 18:32:15
Uptime                    0 days 0 hr. 9 min. 56 sec
Trace Level               off
Security                  OFF
SNMP                      OFF
Listener Parameter File   C:\oracle\ora9I\network\admin\listener.ora
Listener Log File         C:\oracle\ora9I\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=admin-amc.tadawi.loc)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC2ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=admin-amc.tadawi.loc)(PORT=8080))(Presentation=HTTP)(Session=RAW))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=admin-amc.tadawi.loc)(PORT=2100))(Presentation=FTP)(Session=RAW))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orcl" has 2 instance(s).
Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfullyLISTENER.ORA ODBC1 status
LSNRCTL for 32-bit Windows: Version 9.2.0.1.0 - Production on 05-MAR-2012 18:41:52
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=admin-amc)(PORT=1522)))
STATUS of the LISTENER
Alias                     ODBC1
Version                   TNSLSNR for 32-bit Windows: Version 9.2.0.1.0 - Production
Start Date                05-MAR-2012 18:32:08
Uptime                    0 days 0 hr. 9 min. 46 sec
Trace Level               off
Security                  OFF
SNMP                      OFF
Listener Parameter File   C:\oracle\ora9I\network\admin\listener.ora
Listener Log File         C:\oracle\ora9I\network\log\odbc1.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=admin-amc.tadawi.loc)(PORT=1522)))
Services Summary...
Service "ODBC1" has 1 instance(s).
Instance "ODBC1", status UNKNOWN, has 2 handler(s) for this service...
The command completed successfullyWhere hope i'm near to retrive the access data.
Regards
Moazam

JDBC Data Sources: connecting the HR database from Oracle Express

What goes in the data string?
Where do I find the information for Host name, port and SDI?
Thanks!

try these link
About 'create database link ...'
http://www.dba-oracle.com/t_how_create_database_link.htm
http://forums.oracle.com/forums/search.jspa?threadID=&q=dblink&objID=f251&dateRange=all&userID=&numResults=15&rankBy=10001
Edited by: Binepal on May 20, 2010 7:44 AM

Cannot connect to database using Oracle Forms 10g

hi,
I had installed Oracle 10g database and Oracle Forms 10g on Windows Vista Home Basic. However, I was unable to connect to
the database in Oracle Form using scott/scott for database "orcl", with the following error message:
ORA-00604: error occured at recursive SQL level 1
ORA-01009: missing mandatory parameter
However, I could access to the database using this set of username and password. Am I missing something? Thanks.

Hi,
After a successful installation of forms 10g in vista, I'm about to run OPatch Universal Installer for the patch 7047034
in order to fix the form bugs. However, I cannot run the command "opatch apply C:\oracle_form\Patch26_Rel_10105\7047034"
with the error "The Oracle Home c:\devsuitehome_1 is not registered with the Central Inventory.". Then I try to create a
oraInst.loc file, but not much change still. The situation is that oracle 10g is installed before oracle developer suite
10g, and when I try to set oracle_home to oracle 10g's path ("C:\oracle\product\10.2.0\db_1") and run "opatch lsinventory",
it returns the correct result; when oracle developer suite 10g's path ("c:\devsuitehome_1") is set as the oracle_home,
the same command would return a different result as "LsInventory: OPatch Exception while accessing O2O".
I've verified through Oracle Universal Installer that the Central Inventory has included both as oracle_home (oracle 10g
and oracle developer suite 10g). I'm very confused now, though it seems that the problem could be solved by registering the
Central Inventory with oraacle developer suite 10g's path. Thanks.

Unable to connect to the 10g Express edition database in oracle forms

hi,
i have installed Oracle Database 10g Express Edition and oracle 10g developer suite. i need to work on oracle forms by connecting to the database of the 10g express edition but unable to do so as i am not aware of the database name or SID.
can any one tell me how to connect to the above database in oracle forms by specifying username, password and database name ?
Thanks,
Viddu

specifying username, passwordSet up your database user, easy way is to grant them the resource role (*strongly* suggest not using sys nor system for user data) here's one command line sqlplus method:
$ sqlplus /nolog
SQL> connect system -- or connect /as sysdba; if system credential is lost/forgotten
SQL> create user username identified by userpasswd default tablespace <tablespace> temporary tablespace <temp tablespace>;
SQL> grant connect, resource to username;
SQL> exit;
> the database name or SID
Its XE "out of the box", with a servicename is XE as well, using the default port 1521 on the host. The install should also set up a tns alias named, oddly enough, XE, with those connection details from the install. It comes with a USERS data tablespace, and TEMP temporary tablespace.
So after the user is created, i.e. with sqlplus:
SQL> connect username/passwd
or if your session is not on the host where the database is running, with a tns alias pointing to the XE install host in place:
SQL> connect username/passwd@xe
From a different client machine you will need a tnsnames.ora entry defining an alias, it could be any name you would prefer to use as long as the entry points the the database host and port with the correct ORACLE_SID or the database service name.
And don't forget to glance over the documentation, it is thorough and helpful as well http://www.oracle.com/pls/xe102/homepage

Connect to remote database from forms

hi,
I installed 10g developer suite on windows.I have a 10g database running on HPUX server.
I need to connect to this database from forms ( i,e from windows ).
Do i need to install an Oracle client so that forms can talk to a remote database?
I edited C:\Forms_Dev\NETWORK\ADMIN/tnsnames.ora to include the remote database entry. It's not working. So I am thinking maybe I need to install oracle client as a go between.
Thanks

Do i need to install an Oracle client so that forms can talk to a remote database?No, Tnsnames (NET8) is enough.
Write us you tnsnames.ora or try
tnsping <serverdb> from client, and check.

How do I connect to a DB2 database from Oracle 10G on linux?

Hi
I have tryed to connect to a DB2 database from oracle 10 G on linux.
I have installed unixODBC and a db2 odbc driver. I can connect to the db2 using isql, but oracle comes with this error:
select * from testtable@acc_spc_gr2
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC]DRV_InitTdp: DB_ODBC_INTERFACE (718): ; [C077]
Could not find symbol 'SQLAllocConnect' in dynamic library
DB_ODBC_INTERFACE (722): ; [C079] Failed to load dynamic library
'/opt/ibm/iSeriesAccess/lib/libcwbodbc.so'
ORA-02063: preceding 3 lines from ACC_SPC_GR2
What am I doing wrong? Any one have a guide to do this?
- Jesper

this is my complete configuration
Database_
-bash-3.2$ export ORACLE_SID=XE
-bash-3.2$ sqlplus "/as sysdba"
SQL*Plus: Release 10.2.0.1.0 - Production on Mié Jul 7 10:04:43 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Conectado a:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
Platform_
Linux srvpdf 2.6.18-164.el5xen #1 SMP Thu Sep 3 04:47:32 EDT 2009 i686 i686 i386 GNU/Linux
*/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/hs/admin/initDB2DATABASE.init*
#This is a sample agent init file that contains the HS parameters that are
# needed for an ODBC Agent.
# HS init parameters
#HS_FDS_CONNECT_INFO = ODBC_DSN
HS_FDS_CONNECT_INFO = prueba
HS_FDS_TRACE_FILE_NAME = /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/hs/admin/DB2DATABASE.log
HS_FDS_CONNECT_INFO = DB2DATABASE
#HS_FDS_TRACE_LEVEL = debug
HS_FDS_TRACE_LEVEL = 0
HS_FDS_SHAREABLE_NAME = /opt/ibm/iSeriesAccess/lib/libcwbodbc.so
# ODBC specific environment variables
set ODBCINI=/etc/odbc.ini
# Environment variables required for the non-Oracle system
set DB2INSTANCE=is400
listener.ora_
# listener.ora Network Configuration File:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /usr/lib/oracle/xe/app/oracle/product/10.2.0/server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = DB2DATABASE)
(ORACLE_HOME = /usr/lib/oracle/xe/app/oracle/product/10.2.0/server)
(PROGRAM =hsodbc)
(ENVS = LD_LIBRARY_PATH = /opt/ibm/iSeriesAccess/lib:/usr/lib/oracle/xe/app/oracle/product/10.2.0/server)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.18.3.32)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.18.3.31)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
tnsnames.ora_
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = srvpdf)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
DB2DATABASE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST =localhost )(PORT=1521))
(CONNECT_DATA =
(SERVICE_NAME = DB2DATABASE)
(HS=OK)
odbc.ini_
[prueba]
Description = iSeries Access ODBC Driver
Driver = iSeries Access ODBC Driver
System = xxx.xx.3.2
UserID = xxxxxx
Password = xxxxxx
Naming = 0
DefaultLibraries = QGPL
Database = CHERRYWEB
ConnectionType = 0
CommitMode = 2
ExtendedDynamic = 0
DefaultPkgLibrary = QGPL
DefaultPackage = A/DEFAULT(IBM),2,0,1,0,512
AllowDataCompression = 0
MaxFieldLength = 32
BlockFetch = 1
BlockSizeKB = 128
ExtendedColInfo = 0
LibraryView = 0
AllowUnsupportedChar = 0
ForceTranslation = 0
Trace = 0
odbcinst.ini_
[PostgreSQL]
Description = ODBC for PostgreSQL
Driver = /usr/lib/libodbcpsql.so
Setup = /usr/lib/libodbcpsqlS.so
FileUsage = 1
[iSeries Access ODBC Driver]
Description = iSeries Access for Linux ODBC Driver
Driver = /opt/ibm/iSeriesAccess/lib/libcwbodbc.so
Driver64 = /opt/ibm/iSeriesAccess/lib64/libcwbodbc.so
Setup = /opt/ibm/iSeriesAccess/lib/libcwbodbcs.so
Setup64 = /opt/ibm/iSeriesAccess/lib64/libcwbodbcs.so
UsageCount = 1
CPTimeout =
CPReuse =
System = 172.18.3.2
User = inf5mito
Password = lonco3pue
NOTE1 = If using unixODBC 2.2.11 or later and you want the 32 and 64-bit ODBC drivers to share DSN's,
NOTE2 = the following Driver64/Setup64 keywords will provide that support.
Threading = 2
DontDLClose = 1
ODBC Driver_
-bash-3.2$ cd /opt/ibm/iSeriesAccess/lib
-bash-3.2$ ls -ltr
total 2260
-r-xr-xr-x 1 root root 443939 Apr 5 2008 libcwbxda.so
-r-xr-xr-x 1 root root 94504 Apr 5 2008 libcwbrc.so
-r-xr-xr-x 1 root root 16636 Apr 5 2008 libcwbodbcs.so
-r-xr-xr-x 1 root root 729572 Apr 5 2008 libcwbodbc.so
-r-xr-xr-x 1 root root 998060 Apr 5 2008 libcwbcore.so
and this is my error.
SQL> /
select from display@db2database*
ERROR en línea 1:
ORA-28500: la conexión de ORACLE a un sistema no Oracle ha devuelto este
mensaje:
*[Generic Connectivity Using ODBC][C077] Could not find symbol 'SQLAllocConnect'*
in dynamic library
*[C079] Failed to load dynamic library*
*'/opt/ibm/iSeriesAccess/lib/libcwbodbc.so'*
ORA-02063: 3 lines precediendo a DB2DATABASE
Edited by: user6669081 on 07-jul-2010 6:31

Calling Report from Oracle form 11g

I am new to Forms 11g, trying to call report from Oracle forms 11g .
I want to call report from oracle forms, but its giving error.
Below is the code
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('empreport'); -- report node in forms builder
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_EXECUTION_MODE, BATCH);
set_report_object_property ( repid, report_filename, 'empreport.rdf' ); -- report name
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,cache);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'RptSvr'); -- report server name
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
if
rep_status = 'FINISHED'
then
WEB.SHOW_DOCUMENT('http://inorasrv-pc:7001/reports/dtd/rwservlet/getjobid='||v_rep||'?server='||'RptSvr','_blank');
else
message ( 'error while running reports-object ' || error_text );
message ( ' ' );
clear_message;
end if;
end;
Above code giving following error :
Unable to connect to report server RptSvr
I think my report servername is wrong
Where to find report server name in 11g.
I am Using weblogic server, so can i give weblogic server name
Thanks in advance.
Edited by: parapr on Aug 17, 2012 1:52 AM
Edited by: parapr on Aug 17, 2012 3:21 AM

Hi,
You have to have the report server
a. Installed and configured
b. Running.
See
http://docs.oracle.com/cd/E21764_01/bi.1111/b32121/pbr_strt001.htm
http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_verify004.htm
http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_conf003.htm#i1007341
If you are using rwservlet then you will find the name from the Configuration file referred to in the last link.
Cheers,

Calling Report From Oracle Forms

Hi
I am calling this one report from oracle forms, I am using global temporary table to run that report. I am first inserting data into the temporary table through oracle form and then i am calling report in that form to view the data in that temporary table. The problem is, we can not view the data of an other session if we are using temporary table. When i call report from that form a new session get created due to which i can not see the data. Is there any method of calling report from oracle form that a same session is used to run the report?
Thanks.

As you mention Forms and Reports do not share the database session. I had the same problem and resolved it using record groups and DATA_PARAMETER to transfer data from Forms to Reports. You could also read the Note 110495.1 on Metalink to find useful information regarding this issue.
Adi

Call a web services from oracle forms 10

I have to call a web services from oracle forms.
The version of the database is oracle 11gr2. the version of the forms is 10.1.2.0.2.
I allready did the proxy creation and the import class within forms.
I have 2 questions:
1.
I created the following procedure:
PROCEDURE call_WS IS
vobject1 ORA_JAVA.JOBJECT;
vobject2 ORA_JAVA.JOBJECT;
BEGIN
vobject1 := WSEvaluarReglaCondicionComerci.new();
vobject2 := WSEvaluarReglaCondicionComerci.listarValoresAtributoEvento(vobject1, 702, 2217, null, null, null);
END;
the function I calling:
FUNCTION listarValoresAtributoEvento(
obj ORA_JAVA.JOBJECT,
a0 ORA_JAVA.JOBJECT,
a1 ORA_JAVA.JOBJECT,
a2 ORA_JAVA.JOBJECT,
a3 VARCHAR2,
a4 ORA_JAVA.JOBJECT) RETURN ORA_JAVA.JOBJECT;
Note that the parameters is ORA_JAVA_JOBJECT and I need to send numbers. I understand that when I import the classes, because in the WS those parameters are defined as BigDecimal, Forms understand them as java object but when I compile it reports the error: "numero o tipo de argumento erroneo al llamar..." type error.
So the question is, how Cast the numbers to Java Object to send them.
I have read in a web page that one option is to change in the web service the type of the parameters but that is not an option.
2.
The WS returns a super big XML as answer, so how I can parse the result into an Object type?...
The object structure is:
TYPE opciones_obj AS OBJECT
(strindice VARCHAR2 (4000),
nombrecompleto VARCHAR2 (4000),
nombre VARCHAR2 (4000),
strtipodato VARCHAR2 (4000),
codigoopcion NUMBER,
floatval FLOAT,
strtipo VARCHAR2 (4000),
strval VARCHAR2 (4000));
and the tags to extract is:
COLUMNS strindice VARCHAR2 (4000)
PATH 'ns2:mapEntry[ns2:key="strIndice"]/ns2:value',
nombrecompleto VARCHAR2 (4000)
PATH 'ns2:mapEntry[ns2:key="nombreCompleto"]/ns2:value',
nombre VARCHAR2 (4000)
PATH 'ns2:mapEntry[ns2:key="nombre"]/ns2:value',
strtipodato VARCHAR2 (4000)
PATH 'ns2:mapEntry[ns2:key="strTipoDato"]/ns2:value',
codigoopcion NUMBER
PATH 'ns2:mapEntry[ns2:key="codigoOpcion"]/ns2:value',
floatval FLOAT
PATH 'ns2:mapEntry[ns2:key="floatVal"]/ns2:value',
strtipo VARCHAR2 (4000)
PATH 'ns2:mapEntry[ns2:key="strTipo"]/ns2:value',
strval VARCHAR2 (4000)
PATH 'ns2:mapEntry[ns2:key="strVal"]/ns2:value') x;
xquery / xmltype aparently is not an option because the xml is too big.
I will appreciate your answers.
Thanks.
Edited by: user13058213 on 26-ene-2012 16:02

i created jar file to call it from forms
Could you be a little bit less vague about what you exactly did?
Anyway; see here http://bit.ly/10VVoMR
cheers

URGENT!!! calling crystal reports from oracle forms 10g

Is it possible to call crystal reports from oracle forms 10g?
Can someone help to answer how, if there is a solusion, to call crystal reports from oracle forms 10g.
Please provide codes with details showing step by step.
Thanks

hi
try something like this.
DECLARE
charWinHandle VARCHAR2(50);
numWinHandle NUMBER;
BEGIN Set_Application_Property(Cursor_Style,'BUSY');
charWinHandle := Get_Item_Property('Control.Rep',Window_Handle);
numWinHandle := To_Number(charWinHandle);
:Item('Control.CrystalReport1').OCX.Crystal.Crysta lReport.WindowParentHandle
:= numWinHandle;
:Item('Control.CrystalReport1').OCX.Crystal.Crysta lReport.WindowState := 2;
:Item('CONTROL.CRYSTALREPORT1').OCX.Crystal.Crysta lReport.Connect
:= 'DSN=;UID=' || Get_Application_Property(UserName) ||
';pwd=' || Get_Application_Property(password) || ';dsq=;';
Crystal_CrystalCtrl.ReportFileName( :Item('Control.CrystalReport1').interface,
'C:\Sample_Rep.Rpt' );
Set_Window_Property( Forms_Mdi_Window, Window_State,Maximize );
Set_Window_Property( 'MAIN', Window_State, Maximize );
:reptitle := 'Report Preview Window';
numWinHandle := Crystal_CrystalCtrl.PrintReport( :Item('Control.CrystalReport1').interface );
Set_Application_Property(Cursor_Style,'DEFAULT');
END;NOTE: Change the report name and path according to your required file name and path in
the "Crystal_CrystalCtrl.ReportFileName" method call. Also, the connection string shown
assumes that you will use the current USER and PASSWORD for the Form.
- To make the above Form generic so that you can run any Crystal report from it, then create
a parameter for the report name and pass it to the Form using CALL_FORM from any other Form.
Then just replace the file name with the passed parameter.
-. Run the Form
If its correct/helpful please mark it thanks.
sarah
Edited by: S@R@h on Nov 27, 2009 6:33 AM

Calling Stored procedure in Oracle 11g from Oracle forms developer 6i

We have Oracle 11g (11.1.0.7.0 ) database (64 bit) installed on Windows Server 2008.
In this database, we have stored procedure ABC(arg1) which is accesing a table in another instance through DB LINK. If we EXECUTE this procedure from SQL/TOAD. It runs successfully and generates the desired output.
If we write the contents of the stored procedure in the PROGRAM UNIT / ANY TRIGGER in FORM 6i then also, It runs successfully and generates the desired output.
It is also mentioned, that if we try to use any table in the same instance (and not through DBLINK) then it works fine.
However, if we try to call this stored procedure (which is accesing a table in another instance through DB LINK) from ORACLE FORMS 6i in WHEN-BUTTON-PRESSED trigger then the FORM BUILDER gets hanged while compiling the form developed in FORMS 6i.
Please provide a solution to this problem.
THANKS IN ADVANCE.
Hemant Singh.
Asstt. Manager(IT)
Software development team.

Forms 6i was never meant to run against a 11g database, this was not tested and is also not supported.Well, that is not completely true. Developer 6i is supported against a 11g database, but only for Oracle Apps R11. That means that for most other customers (not Apps) Forms 6i will work against an 11g database. However, only Apps R11 is supported, and patches are only created specifically for Apps. We are also running Forms 6i against an 11g database without (well, minor) problems.
In this case, you need to find a solution. You can try to put the stored procedure in a package. The package body, with the reference to the remote table, will be hidden from Forms this way.

Want to scan an image from oracle forms -- Is it possible??

Hi all,
I want to scan an image from oracle forms through a scanner. I have not found any help on this topic. Pls help with example or code or with demmo form.
BR
Tarik.
Edited by: Tarik_kuet on Sep 9, 2008 1:39 PM
Edited by: Tarik_kuet on Sep 9, 2008 1:39 PM

A colleague of me did it like this:
* the scanner is connected to a network document server.
* the document server sends(ftp) the image to the oracle XDB
* a form shows the scanned documents(using a view on the ftp directory in XDB using path_view)
* in this form the user can move the scanned document(s) to a (blob field) in a table.
Hope this helps a bit...
Edited by: poelger on Sep 9, 2008 10:08 AM

Connecting to multi databases from Oracle Forms

Similar Messages

Maybe you are looking for