Connecting with the WRT160N issues

It seems as though I installed everything correctly, the ping is very strong and when I use my DS or netbook my network comes up but after I punch in the code it says cannot connect. This is simply infuriating me, it's been the one but sizable blemish on my Christmas day. I reset, installed everything again and got the same result. It's almost like torture seeing the strong signal there waiting for me but not being able to connect :\
Help anyone?
Solved!
Go to Solution.

I'm not sure what all you have tried -- I would check to see ir youy PC's network adaptor's drivers are up to date -- use Device Manager to check it
Double check your network settings in the router -- and be sure they match up in the PC's network config.
And maybe your router's firmware version needs updated -- check here for current version and the update procedure -- http://tinyurl.com/y9qpzde

Similar Messages

I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows 8?

I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows

Hi, stig2013.
I would recommend the steps in the article below. See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If you are receiving an error message, find the exact error number that you recieved in the article below and process the steps.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
Cheers,
Jason H.

I am trying to look at my I cloud account on a pc in the library it normally works fine but now says problem connecting with the server. what can i do or is there an issue today

I am trying to look at my I cloud account on a pc in the library it normally works fine but now says problem connecting with the server. what can i do or is there an issue today

Hi...
Try restarting the AMDS > How to restart the Apple Mobile Device Service (AMDS) on Windows
iCloud system status reports everything green > Apple - System Status

VPN Issue: Could not Negotiate a connection with the remote PPP server

Hello Folks,
I setup VPN on Windows Server 2003 Enterprise R2. I am successfully able to connect to VPN via laptop internally and externally. However, on my iPhone I am not able to connect and receiving the following error "Could not Negotiate a connection with the remote PPP server".
There doesnt seem to be a lot of documentation regarding this on Apple and or throughout the web.
Anyone resolve this issue?
Peace
Phil C.

I am not entirely sure my full setup. I had a friend help me set it up. Now for some reason when on WIFI on my own network I am able to connect to VPN ( I wasnt able to before), but when I switch to edge there is still no response for the PPP server. I even messed around with the PPP options still no response. Unfortunately I am not extremely server literate so my troubleshooting is limited. However it is now working via my own WIFI and will try it on another WIFI network tomorrow. I am wondering though if it connecting had to do with any updates from microsoft. Since this is a newly installed server 2003 it has been running updates. Some food for thought.
Peace
Phil

Hello.I wanted to upgrade my iPad 1 to iOS 5.1 Over the Air.I was running iOS 5.0.1.It said it had an error connecting to server.It is already 5 hours i cant install this update.I also have an iPhone 4 with iOS 5.0.1 with the same issues.Help please!

Hello.I wanted to upgrade my iPad 1 to iOS 5.1 Over the Air.I was running iOS 5.0.1.It said it had an error connecting to server.It is already 5 hours i cant install this update.I also have an iPhone 4 with iOS 5.0.1 with the same issues.Help please!

You're probably running into the servers simply being swamped. Thousands of people are all going for the software update at the same time. Give it a try again and if that doesn't work, then try plugging it into your computer and trying it that way.
I didn't get a notion of the size, it doesn't seem to be as big as the 700 meg 5.0 update, but it did take me 20+ minutes to download via cable internet so it's a large file. That in and of itself takes a while.
If you're trying to download it directly to your iPhone, you'll need to be on wifi since I'm sure it's well over the 20 meg file size limit for 3G.

It seems my issue was with the Firewire connection with the

I am having an issue with my Ipod and 20inch display firewire connection. (as long as the Firewire connection went directly into the PowerMac, I have no issue.) But when I am using the display firewire connection, wont connect. So I have to use the USB connection on the display for my music transfer.... This is a brand new display and powermac which I got today.
It seems my issue was with the Firewire connection with the Cinema Display.
Can anyone help

Same problem here. I can sync the audio files without problem, but when it starts syncing my photos (on a mac 2.7ghz g5 with 20" cinema) i get a "required file not found" error. This only happens when the ipod is connected to the cinema firewire port, not direct to the back of the g5. when i connect to the back of the g5, i get no errors.

Palm 680 Issue - "Connecting with the deskop using Cradle" msg

I have a curious problem with my 680 Smartphone. When not connected to the cable it is continously and spontaneously attempting to connect with the desktop. Is this some sort of HW short or malfunction? The phone is unusable. Everytime I clear the msg it goes back into synch mode.
Even stranger, if I connect the cable from my PC to the phone, it will become usable again. I can clear it out of synch mode and use all the features of the phone.
Has anyone ever experienced this? I have done all the suggested troubleshooting on the support site.
Post relates to: Treo 680 (AT&T)

Hello GlennPalm1000, Welcome to the Palm Support Community.
This issue seems to appear when the bottom Hotsync connector gets wet or otherwise contaminated. You might try cleaning it with isopropyl alcohol or contact cleaner from an electronics store.
Any chance the phone got wet?
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Mac mini issue:lost connectivity with the wireless keyboard

I lost connectivity with the wireless keyboard and I can't unlock the lock screen.What can i do?

Sometimes powering the keyboard off by holding in the power button on the right end of the battery box and then after ten of so seconds powering up again will reestablish the connection. Other than that forcing a reboot using the power switch on the mini should restore the connection unless thereis something else going on.
If this is a recurring problem try replacing the batteries with fresh ones. If this keyboard has been paired with another bluetooth device such as an iPad or another Mac, unpair it from the other device.

Hyper-V could not replicate changes for virtual machine 'machinename': The connection with the server was terminated abnormally (0x00002EFE).

I have a 3 node cluster that has replica setup to replicate to another cluster off-site.
Suddenly one of the servers is not replicating with the error:
Hyper-V could not replicate changes for virtual machine 'machinename': The connection with the server was terminated abnormally (0x00002EFE). (Virtual Machine ID CC0FD4CC-F9B7-4C68-ABE8-B7D52A87899F)
All other servers are replicating fine so there cannot be a permissions or connectivity issue between the 2 clusters.
This server has 2TB of data so I'd rather not have to start the replication again.
Does anyone have any pointers?
Thanks.

Hi drensta,
Based on my knowledge , "hyper-v replica broker " is needed for failover cluster replica .
Here is a link for "Why is the "Hyper-V Replica Broker" required?"
http://blogs.technet.com/b/virtualization/archive/2012/03/27/why-is-the-quot-hyper-v-replica-broker-quot-required.aspx
Hope this hleps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

NVIDIA OpenGL driver lost connection with the display driver

Alienware M14x Laptop
Windows 7-pre 64-bit
8gb ram
3gb Video: NVIDIA GeForce GT 555M
Intel i7 2760QM
AE CS4
AE keeps crashing. I get the following message while doing something as simple as scrubbing through the timeline, or changing opacity of a layer. in 1080p, I have a picture layer, a solid, some color corrections, and that's it. i just got this new computer and i have never had this problem on my old computer.
this message appears after AE crashes."The NVIDIA OpenGL driver lost connection with the display driver and is unable to continue. The application must close."
this message appears in the taskbar: "Display driver stopped responding and has recovered. Display driver NVIDIA Windows kernel Mode Driver, Version 267.21 stopped responding and has successfully recovered"
any ideas on how to stop AE from causing my display driver to stop working?
Thanks, Ramzi Rebeiz

For anyone picking up this thread (it's probably too late for rrebeiz40 by now!) I have come across a simple but apparently very effective tip that has solved the 'OpenGL driver lost connection' issue for many people using various NVIDIA with various Adobe progs (incidentally a lot of these seem to crop up on Dell machines, especially Notebooks).
(It fixed my issue with Premiere Pro CS4 - GeForce GT 555M on Win 7 Ultimate 64-bit, Dell XPSL702X).
It's posted on http://forum-archive.developer.nvidia.com/index.php?showtopic=5331&st=40 (look for the last post, No 50) as follows:
THIS FIX APPEARS TO WORK...found on an Adobe forum
"This issue led me to this fix: go to NVIDIA Control Panel --> Manage 3D Settings --> Global Settings, and switch "Power Management Mode" to "Prefer Maximum Performance" (the default "Adaptive" setting seemed to be the culprit). And that's it! The key here is changing the "Global" setting, as my individual programs were already set to "Prefer Maximum Performance." I can cause the error to reoccur by changing back to "Adaptive."
Otherwise lots more ideas on this site: http://www.instructables.com/id/How-to-Fix...Nvlddmkm-Error/
My PC has been running for 2 days now. I only put the top fix in for now. Feel happier I have more options if need be though.
Inserted from <http://forum-archive.developer.nvidia.com/index.php?showtopic=5331&st=40>
It worked for me

(err= -3253) connection with the server was reset. (Windows XP)

I purchased a full album and am having trouble downloading three songs off this album from the iTunes store for Windows XP. The album is Draconian - Turning Season Within. Three of the nine songs off this album will not complete the downloads. It will get almost completely finished, for example: 11.1 MB of 11.3 MB, then it will start downloading the song again from the beginning before
reading: stopped (err= -3253). Then a dialog box pops up saying "connection with the server was reset. I wrote an email to support and tried all the suggested fixes, with no desireable results, including making sure my firewall allows access to iTunes and the iTunes store, changing the startup procedure in "msconfig", and running diagnostics on iTunes to check for connectivity, whick it says I have full connectivity to the internet. This is probably my last hope, that someone else has encountered the (err= -3253) message and can help me with it. This is also the third album I've purchased from the iTunes store and the first time I've had any kind of error message. Please help!

Seems to be a scam/rogue software.
http://site-press.com/antivirus/antivirus-news/the-shield-deluxe-how-to-remove-the-shield-deluxe-pop...
http://www.remove-malware.com/forums/viewtopic.php?f=47&t=4288
http://www.microsoft.com/security/antivirus/rogue.aspx
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Can't establish a sftp connection with the finder

Hi, I'm trying to establish a sftp connection with the finder (using the "Connect to server" feature) between my (recently purchased) Mac Mini (mid 2011: i5, 2.3 GHz, 2 GB, running 10.7.3) and a Debian Testing box and I can't, I get the following error:
'There was a problem connecting to the server "ip.address"
This file server will not allow any additional users to log on. Try to connect again later.'
However if I try establishing a connection from the terminal (either ssh or sftp) it works flawlessly:
SSH:
victoria:~ RonIn$ ssh [email protected]
[email protected]'s password:
Linux clementine 3.0.0-1-486 #1 Sat Aug 27 15:56:48 UTC 2011 i686
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
You have new mail.
Last login: Sat Apr 28 21:52:18 2012 from ukamy.local
ronin@clementine:~$
SFTP:
victoria:~ RonIn$ sftp [email protected]
[email protected]'s password:
Connected to ip.address.
sftp>
I've searched for a fix or alternative on the internet and I haven't found one that works; The one that keeps coming up is to try: "ftps" as the protocol instead of "sftp" with the remaining information the same (it doesn't work, it gets the same error message afterwards).
The IP address and login information works (corroborated by the fact that I can log in from the terminal from the Mac Mini) so the only issue is with the finder capabilities for establishing the connection. I have looked for apple related documentation or How Tos but I haven't found anything useful.
I don't want to use any third party app or tweak because of the sensitive information that is going to be transfered, I would like to be using strictly the tools from the OS.
If you need any more information please let me know, any help is deeply appreciated.

I have the same issue although i kind of fixed it. I have two admin accounts and one of the account's safari did the same thing as yours, except, it was the startpage and everypage i tried to visit. I reseted safari, as in the erase all data safari in the toolbar, safari-Reset Safari... But safari still didn't work. I logged out and went to my other account and opened safari. Now it works fine on both accounts. This meant safari had to logout before actually working better. I have this a few times these days.

Run report cause "The page cannot be displayed" OR The connection with the

Hello,
1. Database oracle 10g R2 on windows 2003 server enterprise edition with SP2
2. Application Server Oracle 10g R2 on Windows 2003 Server with SP2.
Problem explanation
one of our branch which is connected via leased line is unable to run some of the reports if the report have a little more
data,
one report i tried its size is almost 900k ( they are using the same line since last three month and they are
able to run all reports before, bandwidth is 128k), if you run report browser search a little while
for output then displayed "The page cannot be displayed" if you look at the report log it's finished successfully.
I try to download the report rather opening in browser it reach to end of in downloading window at the end it display
this message
Internet explorer can not download getjobidxxx.xls from oracleaps.domain.com
The connection with the server was reset.
I want to mention one more thing there is a ISA server and firewall in between client and Server but its the same condition
for
head office client but they are able to run all report with out any error.
any one have idea??
Thanks and Regards,
Khawar

Hello,
Thanks for reply, I have posted Service Request to Oracle Metalink and finally resolve the issue, they suggested me the following solution( a note has also been posted in Knowledge Base no. 871016.1 )
Webcache KeepAlive timeout is reached. (The default value for KeepAlive timeout is 5 seconds)
Increase the Keepalive time in webcache to a higher value
**************EOF******************
Thanks and Regards,
Khawar

"Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility." Trying to format my iomega external HD for use with Mac

Hi. Trying to connect iomega ext. HD. i have to reformat for Mac. When i plug in & go to Disk Utility,the external shows up and i'm supposed to click "partition". When i do, a box comes up saying ""Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility." I quit and relaunched, same results. After googling my question, i came up with this:
"Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility."
(Quitting and reopening Disk Utility does not help.)
The following also appears in Console log:
*** malloc[419]: Deallocation of a pointer not malloced: 0x290a410; This could be a double free(), or free() called with the middle of an allocated block; Try setting environment variable MallocHelp to see tools to help debug : for architecture i386 object: ./Applications/iTunes.app/Contents/MacOS/iTunes malformed object (unknown flavor for flavor number 0 in LC_UNIXTHREAD command 27 can't byte swap it)
Workaround
Quit Disk Utility.
From the Finder's Go menu, choose Go to Folder....
Type the following, then click OK: /Library/Receipts
Temporarily remove these iTunes receipts from /Library/Receipts (sort the folder alphabetically as a list):
iTunes.pkg
iTunes4.pkg
You can put them on the desktop, for example. Do not remove iTunesX.pkg or iTunes Phone Driver.pkg.
Open Disk Utility and repair disk permissions again.
Quit Disk Utility.
Put the removed iTunes receipts back in /Library/Receipts.
Note: This issue does not affect Disk Utility's verify or repair disk features.
All seemed good, for a moment, until, upon going back to Disk Utility after removing itunes4.pkg and putting on desktop (i did not have itunes.pkg to remove) the same thing was happening. When i highlite my iomega ext. on left of page, disk perrmissions is grayed and does not allow me to click on it. Same problem from the start. Can somebody please help me out here? That would soooo awesome. Thanx!

i'm just scared i will do something wrong on my own and lose my data.
You shouldn't be scared of that, because you should already have backups. If you don't have backups, then backing up is the first priority.
Insert the Snow Leopard DVD and restart. When you hear the chime, hold down the C key and keep holding it until the Apple logo appears on the display. You should now see the language selection screen. Select your language, then choose Utilities > Disk Utility from the menu bar. In the Disk Utility window, select the external drive (not the internal). The drive may already have a data partition, in which case there will be another icon below the drive icon. Choose the drive icon, then select the Partition tab. Create a single partition with the default options (GUID partition table, Mac OS X Extended Journaled).
When the partitioning is done, select the startup volume on your internal drive in the DU window. Select the Restore tab. Drag the icon of the startup volume to the "Source" field. Then drag the icon of the newly-created volume on the external drive to the "Destination" field. Make sure you have this right. Then click the Restore button, and the data on your startup volume will be copied to the external drive.

"No connectivity with the server" error for one document but not the other, in the same document library

We have a number of users all of a sudden getting "No connectivity with the server. The file 'xxx' can't be opened because the server couldn't be contacted." errors trying to open MS Office docs (Word, Excel, etc.) in SharePoint with IE,
just by clicking the link and selecting the "Read Only" option. If they select the "Check Out and Edit" option, they can open the document no problem. One of my customers gets the error on one document but not the other, in
the same document library! The older document (a weekly report) was copied and renamed as per standard procedure. She can read the older document, but not the new one.
It is definitely a profile issue, as other people have logged onto the machines of the users with problems and do not get the error. We have also renamed people's c:\user profile folders and the corresponding Profilelist registry entry and the newly
created profile does not experience the error for these people. Renaming the profile back restores all their personal settings but the error reappears. When we copied the old profile's folder structure into the new profile, many of the user settings
were restored (but not all, like Dreamweaver settings) but the error did not appear. We think that the system folders files (like AppData) weren't totally copied over so we're going to run another test using xcopy. We are rebooting between
logons to make sure all files are unlocked.
The laptops and computers are mainly 32bit, Win7 Enterprise running IE9 and Office 2010 Professional Plus, but there's a few 64bit machines as well. The SharePoint farm has 1 WFE, 1 App Server running search and CA, and a shared database server running SQL
2005 SP4. SharePoint is 64bit MOSS 2007 with the latest CU.
We've checked the logs on the client as well as on the server and there aren't any helpful entries. We've also run Process Monitor, also with no helpful entries. We're planning to run something like Fiddler next.
It's not everyone, because there are many people are accessing the SharePoint system and the same files. It is also not a permission thing, as we've tested by giving the users elevated permissions with no changes. One person experiencing
the errors is a Site Collection Admin. That same person ran a test where I coped a simple Excel file into a Document Library which contained a problem file. They were able to open it Read Only no problems that day, but the next day, the same
file gave them an error. In their case, they usually get a "xxx is not checked out" error and only occasionally get the "No connectivity with the server" error.
We've tried lots of things including:
Deleting IE cache
Deleting SharePoint Drafts and webcache folder contents
Running IE without add-ons
Upgrading and Downgrading IE
Uninstalling and re-installing IE
Reinstalling our SSL certs
Repairing Office
Removing and then adding back in the Microsoft Office "Microsoft SharePoint Foundation Support" Office Tool
Deleting all HKLM and HKLU Office registry settings
Toggling IE Compatibility Settings
Toggling the IE Automatic Logon option
Toggling the location of checked out files
Adding the site in the trusted sites list
Adding the site to the WebClient\Parameters registry locations
Making sure the WebClient service is started
Rebooting the machine (lol :)
This is becoming a serious issue, not just because of the inconvenience for the users having to check out every document they want to read, but we have some files with macros that open up other documents to run which are now failing. There aren't
"check out" workarounds for some of those macros.
We're planning to open a ticket with Microsoft, but I'm throwing it out here first in case someone has run into this before, or may have some suggestions on what to try next. Thanks!
-Richard.
PS I think this needs to be in the "General" forum instead?

It took three days of dedicated troubleshooting, but I have found the cause of the errors, and a couple of fixes. It helped tremendously that my own machine was throwing the error. I have scheduled a couple of users to work with me to test the
various fixes, to see which one works best, so the story isn't over yet.
I had backed up my c:\users profile folder and HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList registry key so I could restore my profile after I was done. I made a copy of the profile folder and was using that for awhile,
but then made another copy where I had deleted a lot of content out of it so that the copies would go faster. Since a newly created profile did not have errors, I was trying to copy back as much of the profile as possible to make it easier for our users
to get back to work. Instead of blowing away their profile and starting from scratch (which we know worked) I wanted to narrow down what was causing the error and just skip that from the restore. The concept was to keep as much as the users profile
in tact (application settings, etc.) not just restoring their desktop and My Documents folders.
When we first tested a few weeks ago, simply copying the folder contents didn't reproduce the error. I then tried xcopy, but got the "can't read file" error. Then I tried robocopy, and ran into the "junction" problem.
I went back to xcopy, and found that placing the excludes.txt file in the windows/system32 folder eliminated the error.
So the process went as follows:
Reboot and log into the machine as another user
Delete the profile and associated registry key
Reboot and log into the machine as the affected user, creating a new profile, and there is no error
Reboot and log in as the other user
xcopy the contents of the skinned-down backed-up profile to the newly created profile
Reboot and log in as the affected user, and the error occurs
Repeat the above, but add items in the excludes.txt file to see what, when eliminated, causes the error not to appear in the last step
I eventually found that skipping the c:\users\<profile folder>\appdata\local\Microsoft\office\14.0 folder allowed the entire profile to be copied over without the error occurring. That was strange, because we've cleaned out the cache folders
before which didn't fix the issue.
So I went about it the opposite way, and tried to delete the 14.0 folder from the restored profile, and after reboot, the error still occurred.
What eventually worked was deleting the 14.0 folder and copying over a 14.0 folder from a newly created profile!
One way to do this was to:
Reboot and log in as another user
Rename the c:\users profile folder
Rename the appropriate [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList] registry key
Reboot and log in as the affected user, confirm that there is no error
Reboot and log in as the other user
Copy the C:\Users\<profile folder>\AppData\Local\microsoft\Office\14.0 folder to the other user's desktop
Delete new profile folder, and rename the backup to be the production folder
Delete the C:\Users\<profile folder>\AppData\Local\microsoft\Office\14.0 folder and then paste the 14.0 copy from the desktop
Reboot and log in as the affected user, confirm that there is no error
We've tried this on a couple machines and it works. I had to run Windows Explorer as Administrator to access the other profile's folders.
We've also successfully copied a 14.0 folder created by one profile on one affected computer over another profile's folder on another computer, eliminating the error, so we're trying that first, as that is fewer steps.
We may attempt to script this, but the self-help instructions are only 5 lines long:
Reboot and log into the affected computer with another account
Go to <link to location of 14.0 folder on network> and copy the 14.0 folder
Run Windows Explorer as Administrator
Go to c:\users\<profile folder>\appdata\local\microsoft\office and delete the 14.0 folder, and paste the copied 14.0 folder (trying to overwrite it makes Win7 want to merge the folders)
Reboot and log into your normal account, and confirm the error is gone
I'll come back and report after we go into the field with this fix, but after the few tests, I am cautiously optimistic that this is it.

Connecting with the WRT160N issues

Similar Messages

Maybe you are looking for