Connection cannot be made to the redirector

Hi,
I am using SQL Server 2012 Management Studio, SQL Server Data Tools and Visual Studio 2012 to deploy a data mining project.
I get the following error: A connection cannot be made. Ensure that the server is running.
I am able to fetch database using the below details:
Machine name: NIRMALK01-PC
SQL SERVER: SQLEXPRESS
SQL EXPRESS: Running
SQL BROWSER: Running
SQL AGENT: DISABLED
I do not find any Analysis Services in services.msc
Please advise.
This is the error message:
Error 1
The project could not be deployed to the 'nirmalk01-pc\sqlexpress' server because of the following connectivity problems : A connection cannot be made to redirector. Ensure that 'SQL Browser' service is running. To verify or update the
name of the target server, right-click on the project in Solution Explorer, select Project Properties, click on the Deployment tab, and then enter the name of the server.
Regards,
Nirmal

Hi nirmalgopalakrishnan,
The features you are trying to use aren't compatible with SQL server express. Please see the features supported by the editions of SQL server link here features
supported by editions 2012. Please see the integration services section.
Good luck.

Similar Messages

A connection cannot be made; Ensure that the server is running

Hi There
I have installed Analysis service on my server machine through remote login from my service account. I am able to open Analysis services from there.
When I open SSMS from the same service account on my local machine, I am not able to connect to that Analysis service. It is giving me error by saying :
"A connection cannot be made to redirector. Ensure that 'SQL Browser' service is running. (Microsoft.AnalysisServices.AdomdClient).
A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connection host has failed to respond 10.245.192.111:2382(System)."
Do you have any solution to this ??
Thanks
Nidhi

Hi Nidhi,
Based on my research, the issue was caused by the Browser Service account was changed to the domain account. In your scenario, you can try to connect to the Analysis Service using <Servername>:2383 instead of instance name. Or you can change the
Browser Service account to "Local System". Here is a blog that describes the detail informatin about it error, please see:
Analysis Service connectivity error due to SQL Browser service
Connectivity
Issue: "A connection cannot be made to redirector. Ensure that 'SQL Browser' service is running"
If you have any questions, please feel free to ask.
Regards,
Charlie Liao
TechNet Community Support

Aggregation Design Wizard - a connection cannot be made

In the Aggregation Design Wizard - step Set Aggregation Options - and I'm using the option to 'Performance Gain Reaches 80%'.
When I click the Start button I get an error message stating .... 'A connection cannot be made. Ensure that the server is running.'
Looking at some other threads here I read to try going to the MS SS Management Studio and make sure I can connect to Analysis Services. When I try to connect to Analysis Services in management studio I get the message 'A connection cannot be made to
redirector. Ensure that the SQL Browser service is running.'
When I look at the SQL Browser service in my services manager, it says that the SQL Browser is disabled.
After enabling and starting the SQL Browser service, I still cannot connect to AS from the studio. I get the message...'A connection cannot be made. Ensure that the server is running. No connection could be made because the target machine
actively refused it.' then there is an IP address and a port number.
Any help would be appreciated.

Hi,
You should have "SQL Server Analysis Services" service if you have SSAS installed properly in your machine. For an example take a look into this screenshot. In my development environment I have three SSAS instances. One for SSAS Tabular 2012, One
for SSAS MDX Mode 2012 and SSAS 2008R2. So I am having three instances of the service.
Best regards,
Chandima Lakmal Fonseka

Cannot download from itunes network connection cannot be made

I'm getting this error message when I try to download anything from itunes or app store. "cannot download from itunes" "network connection cannot be made.

it shows this beside the pending app "-stopped (err = -3150)"

TS3048 Tiny green light continues to blink and no connection is ever made on the screen for both Keyboard and Mouse

After doing the steps http://support.apple.com/kb/TS3048#1 both keyboard and mouse tiny green light continues to blink and no connection is ever made on the screen. What could the problem be? Items are only 4 months old.

Hello:
Try resetting the PRAM and SMC. You will need a KB to reset the PRAM, but the SMC may be reset without any peripherals.
Barry

Errors using weblogic sql driver: "No JDBC connection can be made because the transaction state is marked rollback"

One of our customers starts to encounter this error message recently.
We checked our log files. It seems that the error happens when
to obtain a jdbc connection. Have anyone seen similar problems
and knows how to fix it? thanks in advance.
We are using weblogic server 6.1sp2, and weblogic sql type 4 driver.
The functions that invoke the jdbc calls are stateless session bean
methods with their transaction attributes marked as Required.
There is no nested calls of these methods.
A partial stack trace we obtained is as following:
java.sql.SQLException: No JDBC connection can be made
because the transaction state is
Marked Rollback
     at weblogic.jdbc.jts.Connection.getOrCreateConnection(Connection.java:586)
     at weblogic.jdbc.jts.Connection.prepareStatement(Connection.java:115)
     at weblogic.jdbc.rmi.internal.ConnectionImpl.prepareStatement(ConnectionImpl.java:135)
     at weblogic.jdbc.rmi.SerialConnection.prepareStatement(SerialConnection.java:76)
lixin

Joseph Weinstein <[email protected]> wrote:
>
>
YuanHui Liu wrote:
Joe,
We got the exact same error message. The error came after we got theJDBC connection,
and trying to create statement off it.
It occurs intermitently when we are running another standalone JAVAapp to do
some end of day work, which results in the DB Server being very busy(90+%CPU
usage) for about 5 minutes. We see a surge of requests to the WLSJDBC Connection
pool. This would sometimes result in all our subsequent DB requeststo fail and
lead to a crash.
We are using WLS6.0SP1. I do not think there's a 30 seconds wait leadingto a
connection timeout that caused this(rather it is the end effect).
Can you give us a more detailed explanation? Is there a miscommunicationbetween
our DB(Sybase12) and WLS?Hi. It looks to you like it's after you get the connection, but really
it's when the server is
gettng the pool connection. For performance/synchronization reasons we
do a clever
delay: When your code asks for a pool connection we quickly give you
the pool wrapper,
but we delay actually reserving the real underlying DBMS connection until
your first
real need for a connection, at your first JDBC call, such as createStatement()
etc.
It is while waiting for a pool connection long enough for the transaction
coordinator
to have timed you out before you ever get a chance. It's nothing to do
with the
DBMS or even JDBC, I believe. I think the weblogic server either has
too few execute-threads
and/or too few CPU cycles to do the work load.
Okay, so there's a lazy initialization of the connection.
From reading our log I believe our failur is immediate rather
than waiting for 30+ seconds(the default setting) from the DB,
the timeout occurred later as a result. At the time either because the DB Server
is very busy.
Since we are running WLS6.0 we have only one connection pool,
we have defined a max of 150 threads in the pool. While this
is happening the DB Server is being pinned by an overnight job,
but the WLS Server is not busy at all. The DB and WLS resides
on different physical boxes.
We also have a thread dump from the WLS console when we rebooted the server, it
showed that we are hanging on to the thread & jdbc
connections after these exceptions has occurred instead of releasing them, note
"16083"(~4.5 hours) seconds has passed:
142 116222 Retry rollback request for tx: 'transaction=(IdHash=2963855,Name =
[EJB UserManagerBeanImpl.signalICUserServletHeartBeat()],Xid=30643:8f3838f3709bf53d,Status=Rolling
Back. [Reason = Unknown],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since
begin=16083,seconds left=10,ServerResourceInfo[weblogic.jdbc.jts.Connection]=(state=started,assigned=server),SCInfo[server]=(state=active),properties=({weblogic.jdbc=t3://159.55.158.25:8005,
weblogic.transaction.name=[EJB UserManagerBeanImpl.signalICUserServletHeartBeat()]}))'
Scheduled Trigger
So I would argue this problem actually chewed up resources on the WLS server.
-Yuanhui Liu
>>
>>
Thanks.
-YuanHui Liu
Joseph Weinstein <[email protected]> wrote:
lixin wrote:
One of our customers starts to encounter this error message recently.
We checked our log files. It seems that the error happens when
to obtain a jdbc connection. Have anyone seen similar problems
and knows how to fix it? thanks in advance.
We are using weblogic server 6.1sp2, and weblogic sql type 4 driver.
The functions that invoke the jdbc calls are stateless session bean
methods with their transaction attributes marked as Required.
There is no nested calls of these methods.
A partial stack trace we obtained is as following:
java.sql.SQLException: No JDBC connection can be made
because the transaction state is
Marked Rollback
at weblogic.jdbc.jts.Connection.getOrCreateConnection(Connection.java:586)Hi. This sounds like a JVM thread starvation issue, and/or a server
load
issue. What is
happening is that the transaction is started, and times out beforethe
SSB even gets to
the first JDBC work. I would first verify that the customer is using
the very latest JVM
available for the machine.
Joe Weinstein
at weblogic.jdbc.jts.Connection.prepareStatement(Connection.java:115)
at weblogic.jdbc.rmi.internal.ConnectionImpl.prepareStatement(ConnectionImpl.java:135)
at weblogic.jdbc.rmi.SerialConnection.prepareStatement(SerialConnection.java:76)
lixin

No connection could be made because the target machine actively refused it

Hi,
I could not see EPM Dimensions library even from fresh install on win2003, EPM 11.1.3.
No connection could be made because the target machine actively refused it 127.0.0.1:5251
http://<Web Server>:19000/awb/conf/AWBConfig.xml
status=404.
I am using stand alone machine. I need help. I already installed more than five times , same issue.
Regards in Advance.
Anand.
Edited by: prabhanand on Oct 27, 2009 4:12 PM

Check if your EPMA Web Application Service is running. If it is, attempt to get to this URL: http://server:19091/awb. If you can see the page, you should try to login. If your login fails and you get a 404, the issue is isolated to the IIS side. Check your IIS logs and you can take it from there. You should also check your IIS settings and make sure that there's a virtual directory for EPMA in IIS.

Provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.

hi all,
i want to connect to server side from client , i am using sql server 2008 sp1 and os winn 7 64 bit, but it give me an error as above.
also i tried this link:
http://social.msdn.microsoft.com/Forums/sqlserver/es-ES/c0481462-fedf-4f3b-b984-ae3fef64a3b1/provider-tcp-provider-error-0-no-connection-could-be-made-because-the-target-machine-actively?forum=sqldatabaseengine
and i configured two things as follow:
windows firewall --> port --> spacial local (1433) --> allow the connection -->public (checked) and sql server network configuration manager -->protocols for mssqlserver TCP/IP(enabled).
note: my client and server windows firewalls is disabled.
but i can not solve this issue.
pls help me.
thanks & best regards.
pls help me

hi Sathish,
thank you,
this is my connection string>>
"Data Source=192.168.1.106.1433;Network Library=DBMSSOCN;" +
"Initial Catalog=rasol;Integrated Security=sspi;"
And I tried into command prompt, it replied for 192.168.1.106.
best regards.

An outgoing call cannot be made as the application is dispatching an input-synchronous call

Hi all,
In my Application we have .hta[Vb script] File to excute.Few days before "Window updater has updated some important updates in the system[windows server 2008 R2]". After that my script shows Following Error, when control goes
to these file[".hta"]
"an outgoing call cannot be made as the application is dispatching an input-synchronous call"
I have refer to the following link : http://support.quickbooks.intuit.com/support/articles/SLN61289
and i preferred to go with Solution3: But in my Services.mst i couldn't see both "Intuit Entitlement Service XX" and "QBPOS Database Manager XX" services. I need of assistance
to resolve this issue..
Thanks in advance,
Test Hunter...

i hope a problem is with Windows update and HTML HOST Application.. i have posted in many Forum but no one has find the solution.. Could Please suggest me the correct direction where i could get Answer for these..
Thanks In advances....
I suggest starting here: https://community.intuit.com/
¯\_(ツ)_/¯

SLD connection need to made for the ECC apps system or ECC DB system

hi Friends,
We have installed the ECC 6.0 . But the ECCAPP is installed in one system and ECC Database is installed in different system.
So , From portal we are planning to run some webdynpro iViews. Which are required to connect the ECC system for getting the data. Please let me know should i prepare the SLD connection for the ECCDB system or ECCAPP system.
Regards
Regards

Hi,
You can very well create SLD system for ECCAPP and internally it will connect to the database. direct database connectivity is not required in the SLD.
Regards,
Sanjeev Mourya

HT201210 I am trying to update a 4th gen ipod touch to version 6.0 but keep getting "connection cannot be made" errors. I am connected to internet. It is the first time i have updated/synced with my new laptop since getting it for xmas. my iphone has wor

HELP
Help needed to update a 4th gen ipod touch running version 4.3.5 (8L1) to the latest 6.0 version. When I connect and try to update i keep getting a box which states that a connection error occured and I cannot update.
I have been given a new laptop for xmas which runs on windows 8, and the new itunes version (which is in itself a hurdle as I am a technophobe!) and this is all becoming a bit fustrating.
I have connected, updated and synced my iphone successfully, but just hit a brick wall on the ipod. (which incidentally maybe where this laptop will end up!!)
Help if you can, but in laymans terms.......

Thank you for you input so far.....
I think we are getting nearer to the solution sort of!
Let me get this straight...... I have paid for content on itunes, bought the apple devicds in order to play said content, now I have to subscribe $25 for the privilage of playing MY library content on MY other devices. Which wasn't such an issue to do before the new and improved itunes version!!
Have I got that correct. I think I cannot associate my other iOS devices with my library because I am unwilling to pay further through the nose!!!??? or am I missing something?
Thanks
Frustrated even more now!!

Cannot get connection from Iphone 5 to my desktop via bluetoot. They seem to see eachother just fine and I am getting the code on my computer and the phone but when I hit the pair button the connection cannot be made

Trying to connect my iphone 5 with my desktop MAC via bluetooth. Everything seems to be working fine when pairing them up. I get the code on both the computer and the phone but when I hit the final pairing button i get an unsuccessful pairing issue. Any ideas

Catch 22
I need Safari to get to that first page so I can do that!
I am already logged on via the laptop, and can add the iPhone if Safari could only get to the first page!!
The lobby wifi is open, and doesn't need the sign in page, but I can't get to the Internet even though it seems to have connected to the hotel's wifi.

SSAS 2012 Deployment Wizard - A connection cannot be made.

Hi
I have a virtual server of Windows 2012 Standard on USA from a cloud provider. I installed SQL 2012 and it is stand-alone server, not part of domain.
I am in Australia developing SSAS to be deployed to the server above. The problem I am facing is that even though SSAS is running on that server, I can not deploy the project to the server both in Bids and SSAS deployment Wizard. I can copy the project
to the server and deploy it there in Bids.
I am just wondering why I can not do it. I created a sample cube on the server and can connect to it using Excel.
I have a feeling that one of the requirement to deploy a project remotely is to be a part of domain - Making my computer or my credential as an admin to the SSAS server to deploy the project. Am I right? or is there something I am doing wrong?
Firewall is ok. I got the right ip address. I just can not deploy remotely?
What's the requirement of the remote deployment?
Kind regards

Hi SQLMa,
According to your description, you instal SQL Server Analysis Service instance in the Virtual Machine of Windows Azure, now the problem is that you cannot deploy the SSAS project to this server, right?
In this case, you need to create the Virtual Network on the VM, and then connect to the Azure VM through the Virtual Network. Here is a blog which descrie build an OLAP Farm in the Cloud with Azure Virtual Machines step by step, plese refer to the link below:
http://byobi.com/blog/2014/06/building-an-olap-farm-in-the-cloud-with-azure-virtual-machines-part-1/
Regrds,
Charlie Liao
TechNet Community Support

SSAS - No connection could be made because the target machine actively refused it

SSAS Service was working fine…. All of sudden it stopped not sure why the service was stopped. I would like to findout why the service stopped, its just to make sure it should not happen in future
Please help me with suggestions.
Thanks & Regards, Santhosh

Hi Santhosh,
Based on your description, we just know the SQL Server Analysis Services (SSAS) stopped. So we cannot give you the exact reason that cause this issue. However, you can troubleshoot this issue by using the Windows Event logs and msmdsrv.log.
You can access Windows Event logs via "Administrative Tools" --> "Event Viewer". SSAS error messages will appear in the application log.
The msmdsrv.log file for the SSAS instance that can be found in \log folder of the instance. (C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log)
Here is a blog about data collection for troubleshooting Analysis Services issues, please see:
Data collection for troubleshooting Analysis Services issues
Regards,
Charlie Liao
TechNet Community Support

Error message:OLAPConnect Error : A connection cannot be made.Error in SP5?

We recently applied service pack 5 into our environment. We are running BPC 7.0 MS on SQL 2008. Now I am receiving this OLAPConnectError when trying to delete an appset. I saw the post listed below however I feel this issue is different so I posted a new thread.
When the delete appset process starts it runs a step to delete the OLAP database (4 out of 6 times it did) and then fails with the OLAPConnectError. I was wondering if this is a bug in SP5 that somehow the order of delete package got reversed. Everything else is working fine.
Also I was attempting to post the screenshot as others have but I do not see an option.
Any help on this issue would be appreciated.

Hi , I have the same problem.
I submitted the problem to the SAP Support but the answer has been to reinstall the system without specifying what setting are to be applied in the installation procedure.
Because the system is working fine apart the appset deletion , I haven't planned at the moment to reinstall partly without knowing what to change.
I thought my problem could be due to the sql server system ( db server and olap server ) which is on a non-default instance .
I have set the port to fixed value bacause - I thought - the cause could be the dynamic port used (by default ) by a non default instance.
Unfortunately the setting above did not resolve the issue.
Anyone has an idea ?
Note please that also the SAP support couldn't help me.
Paolo

Connection cannot be made to the redirector

Similar Messages

Maybe you are looking for