Connection from ONE VM to multiple X-displays?

Hallo,
is it possible to display AWT/Swing components on multiple X11 displays (not screens)
from ONE virtual machine? Each display has its own name/ip-address.
Thanx

From the command line you can only "export DISPLAY" to one machine.
But, have a look at java.awt.GraphicsDevice and java.awt.GraphicsEnvironment.
They look promising, returning an array of screens.
regards,
Owen

Similar Messages

HT3382 Connect from a MacBook Pro's mini display port to a Display Port monitor?

Hello everyone,
Is it possible to connect from a MacBook Pro's mini display port to a Display Port monitor with resolutions higher than 1920 x 1200? It seems Apple does not supply a mini-DP to DP adapter.
However, just as they do not make a mini-DP to HDMI adapter, but they do recommend a Belkin product for this purpose.
Is there any reason that a mini-DP to DP adapter or cable wouldn't work and support high resolutions?
Thanks for your feedback!

danz0r wrote:
Hey tjk,
Thanks for the response.
Do you have any recommendations for a potential set up? The audio output and Apple DVI are on different sides of my MBP, which is alright, I guess I can get two long cables to handle each. I was hoping to just have my MBP closer to where I use it, with a cord nearby plugged in on one side to the HDTV and resting near where I keep my MBP for when I want to use the HDTV as an external monitor.
With a converter like this, you can run video out of the MBP's DVI port, and miniToslink (optical) audio out of the 3.5mm stereo mini jack to the converter, then it will combine the two and output audio and video through HDMI to the monitor.
http://www.supermediastore.com/product/u/apogee-dvi-to-hdmi-converter-spdif-opti cal-toslink-coaxial-input-output?utm_source=cj&utm_medium=aff&utm_content=HDMI+A ccessories
Otherwise, depending on the TV's inputs, for video you could run DVI to DVI on the TV, or DVI to HDMI to the TV. For audio you could run 3.5mm stereo mini plug from the MBP to RCA adapter on the TV. Toslink/optical is also an option.

Copy the inspection result from one lot to multiples lots!!

Hi SAP expert,
I want to copy the inspection result from one lot to multiples lots, currently i know how to setup the copy to another lot(SAML Response from SAP ID Service ) , but i dont know to do to multiples lot.
¿Someone can help me?
Thank you

First you have to customizing the functionality of Copy of Inspection Results using the following path, where you have to entry the inspection types, plant .etc., where you want to have the functionality.
SPRO -> Quality Management -> Quality Inspection -> Make Settings for Copy of Inspection Results
Then when you are in Record Result screen you select Menu -> Edit -> Copy Inspection Results ,
then a pop-up window is displayed and you filled in with the inspection lot which has the results and then another pop-up window is displayed to select the characteristics that you want to copy.
A.P.

Script to pull all connections from one IP out of DPS access logs...

I need an efficient script to pull all of the connections for 2 IP's (or match the first two octets of the IP will cover both addresses also) from multiple DPS access logs out and write them to a file.
The current one-liner I've been using doesn't work well with multiple access log files. So I tried combining multiple logs into one access log, and then trying to parse that large log file (around . The problem is, I am now getting the error: "bash: /usr/bin/egrep: Arg list too long", which is because it takes all of the connection numbers and builds a grep with them.
Here is the one-liner I've been using:
FILTER='client=192.168.1.1|client=192.168.2.1'; FILE='access.*'; for j in $FILE; do unset CONN; for i in `egrep -h "$FILTER" $j | awk '{print $8}'`; do CONN="$CONN|$i"; done; if [ -n "${CONN+x}" ]; then egrep -h $CONN $j; fi; done | sort -t '/' -k2,2M -k1n
Is there a faster and more efficient way to pull out all of the connections from one or more IP's in access logs? I would think someone out there would have written something to do this?
Thanks everyone!!!
Edited by: keesor on Aug 17, 2011 2:49 PM

It could be as simple as
lgrep -O conn <IP> access
If you have more logs you can cat them and pipe the output to lgrep in a pipeline, like:
cat access.1 access.2 ... access.n | lgrep -O conn <IP>
Just make sure that the logs are listed in sequence. The script won't produce reliable results if the log is non-sequential.

HHola I update my Apple TV and I am frozen screen with the photo of Apple TV and iTunes symbol and a cable connected from one to another device, it happens and how to fix it Apple TV

HHola I update my Apple TV and I am frozen screen with the photo of Apple TV and iTunes symbol and a cable connected from one to another device, it happens and how to fix it Apple TV

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

Can only connect from one direction

I'm having trouble video confrencing... I tried searching the forums, but I'm having trouble thinking of clever search terms.
I can only connect from one direction with one person. They can invite me to a chat and it works fine every time. However when I invite them it always fails. I can invite other people and it works fine though.
This doesn't seem like a typical router problem, because they can invite me and we videochat just fine.
This has been a problem for most versions of iChat that I can remember, but I'm using 3.1.5 currently.

Hi
Is the other person a PC user.
Tony

Transferring from one asset to multiple assets

Dear SAPians
How can we transfer from one asset to more than one assets. Can we do it thru ABUMN or there's any other way?
Regards
Zain

Hi Dominic,
Thanks for your reply.
I have tried ABUMN. I am entering into the transaction ABUMN and specifiying transaction data (posting and asset value dates). Then I am pressing the "Multiple assets" button after which a List option is available.
I am entering the amount or percentage in partial tranfer tab.
Then I am entering asset numbers in 'from asset' and 'to asset' fields like:
From asset 300000001 to 300000005
From asset 300000001 to 300000007
When I am pressing enter, it accepts only one entry from above specified list.
That means it allows only one to one asset transfer not one to many. Is there any other setting or way to do asset tranfer from one asset to multiple assets?
regards
Zain

How do I apply color correction from one clip to multiple clips?

Hey Everyone,
I coming to find out that I'd like to apply the color correction from one clip to multiple without clicking, dragging, and punching in every setting clip by clip. Does anyone know how? This would be a total time saver! Thanks in advance.
Mike Diaz

Grizzly,
You are too awesome! Thank you so much my friend.
Mike Diaz

Remote Desktop Connection Times Out With "Can't Connect" From One Specific Computer Only

This is an odd one... I manage several servers from this computer. This particular server, 2012 Essentials, won't allow for remote desktop connections to either the server or attached workstations. I can get into the server's remote web page but when I
attempt a remote desktop connection, it hangs on "Initiating remote connection..." and then times out with the error response that remote desktop can't connect. But... if I attempt the same connections from any other computer, I am able to get in
and utilize remote desktop. Does this mean that there is a certificate issue with the computer unable to connect and if so, how does one remedy this? Or is it some other issue? I've attempted everything within my technical ability to no avail. Any suggestions
are greatly appreciated.

Hi,
Before going further, would you please let me know the RDC version that used in the problematic computer? Was it the same with other computers?
Please temporarily disable firewall and then check if this issue can be solved. Based on your current description, it’s hard to say the root reason of this issue.
So, I suggest that you should check relevant log files and get some clues. It will help us to narrow down and solve your issue.
Hope this helps.
Best regards,
Justin Gu

Connection from one PI 7.0 system to 2 SAP R/3 systems

Hi XI Experts,
There is a requirement as below:
I am using PI 7.0 system. This system has to be connected to 2 R/3 systems paralelly. That means, one XI system should be connected to 2 R/3 systems. Request you to suggest the best possible ways to do make this happen.
Please note that , PI system will have to connect to one 4.6C system(R/3) and one SAP ECC 6.0(R/3) system.
Kindly advise.
Regards,
Subbu

Hi
Yes,you can integrate multiple sap systems with PI.
1) Create a automatic Technical system for 4.6C system(R/3) using RZ70 in 4.6c...then create a business system for this.
2) Create a automatic tecnical system in sld for SAP ECC 6.0(R/3) system using rz70 in ecc and create a business system for this.
3) Also create TS & BS if any non sap applications are involved.
use this Business systems as per the interface requirements for sender & receiver
Regards
Abhijit

How to reduce the number of Remote Gateway connections from one server

Hi ,
We have an XI 3.0 prod system which is being flooded every month end by the invoices generated in our ERP system and occupying all the gateway connections, what I see is that all the remote gateway connections are being established by our ERP server and still there are many requests waiting at the ERP server and failing.
When we ran the same in our test landscape, the invoices are getting transferred to XI with out any problems, the remote gateway connections are free even when the invocie Volumes transferred are the same in Prod and Test servers.
we are not considerint to Increasing the rdisp/max_gateways as the volumes of invocies transferred are really huge and in one of the test, we observed that when 40 invocies are transferred from ERP, it occupied 40 Remote gateway connections in our XI prod
We are looking for the option similar to our test system of transferring many requests from one connection. Is there any such specific option?
Regards,
Santhi Bushan.

Dear Santhi,
every gateway establishes only one connection to another gateway. If there are that many gateway/gateway connections, then you are probably connecting from more than one instance. You could circumvent this, if you use gateway options in the RFC destination being used, as this will force all outgoing RFC calls to go through a single gateway. This will then mean that the system has a single point of access.
Best Regards,
Tim

How to open multiple db connections from one form?

Hello,
We have two different Oracle databases and need to access them (read and write) from the same form. Is there a way to do this, apart from using EXEC_SQL as described in Note 67516.1 ? I could also use db_links and synonyms, but this would add an extra maintenance aspect that I'd like to avoid.
Thanks,
:-Phil

Sorry Phil,
but that's all you got.
Frank

One Macbook Air, multiple shares displaying in Finder?

Since installing Yosemite the Shared area of the Finder sidebar is now showing not only my Airport Extreme USB HD, but is also displaying my Macbook Air (named GSB). Okay, whatever. But it's also racking up multiples over time so I have GSB (2), GSB (3), and so forth.
I don't really care, but it's messing with my AppleTV and ROKU finding my shared movies and playing them. I have to keep removing the share from the players and re-adding it. Any advice? I know NOTHING of networking really.

Doing it again today:

How to migrate Power View reports and respective BISM connections from one SharePoint environment to another?

Hello All,
We have a few Power View reports and respective BISM connections that need to be migrated from our DEV SharePoint 2013 site to our TEST Sharepoint 2013 site. The reports have been "migrated" over but they do not work. Eventually, I just recreated
all the Power View reports from the BISM connections.
We have to do one more Sharepoint migration, and I'd rather not have to recreate the reports. What do we need to do in order to migrate the Power View reports seamlessly?
Thanks,
Carter

I created a new BISM in the new SharePoint site with the same name and modified the cinneciton string in the report and uploaded the PowerView Reports ( download from the existing SP site ).
Please see the below link to modify the connection string in the PowerView report.
https://pivotstreamllc.zendesk.com/hc/en-us/articles/202123933-Editing-a-Power-View-Connection-String

Unwanted migration of dock from one screen to another (two displays)

I recently upgraded to Mavericks, and now when I open certain applications (e.g. Calendar), the dock jumps from its position on the bottom of my right screen (two-display set up) to the bottom of the left display.
This is problematic for several reasons, not the least of which is I want to control what happens, not be at the whim of Mac OS-X. But the important thing here is that the two screens are not the same - one is a cinema display, one a lower resolution monitor, and I have them arranged this way for a reason. OS-X is moving the dock to the lower resolution display, and that's crowding it.
What's causing this? How can I get it to stop?

The dock is made to move based on dragging the pointer down off the bottom edge of the display where the Dock is not. So, if the dock is on display 1 and you drag your mouse point down from the bottom edge of display 2, the dock interprets this as "move to display 2".
Is it possible your are inadvertantly doing this while working in calendar?

Connection from ONE VM to multiple X-displays?

Similar Messages

Maybe you are looking for