Connection from Web Intelligence over Universe to SAP ERP without SAP BW

Hi there,
is there a way to create a Universe which ic connected to SAP ERP (ECC 6.0) ? I want to use Web-Intelligence to create the Reports for my ERP-Data. But i don't want to make the way over SAP BW.
Otherwise i have to use Crystal because Crystal + SAP ERP Integration Kit can handle a connection to ERP. But then i have to waste a lot of time for the accuracy to a pixel which i dont need and i dont want...
Any Ideas ?!
Thanks
Sebastian
Edited by: smenzl on Mar 31, 2010 9:17 AM

Hi
you have 4 options:
1) Load your SAP ERP data into an SAP BW system and use OLAP universes to build WebI reports.
2) Use Rapid marts for SAP. This product comprises Data Integrator mappings that will allow to load your SAP ERP data into a predefined DWH based on a relational data source (like DB2, MS SQL Server or Oracle). It also includes a universe based on the predefined relational DWH that will allow you to build WebI reports.
3) Use the Data Federator with the SAP R/3 connector. Please note that the R/3 connector is NOT a product rather a prototype tand will be used at own risk (SAP BusinessObjects Web Intelligence Reporting for SAP ERP [original link is broken])
4) NOT RECOMMENDED: Try to access the tables directly in the underlying database. Please note that this may work for some but not all of the ERP data. In several case the data are stored encoded in the underlying tables and there is no way to extract the required information. Additionally the ERP security will not be leveraged into the WebI report.
Crystal reports is the currently the only BO reporting tool, which supports direct access to SAP ERP data sources.
Regards,
Stratos

Similar Messages

Web service client behind a proxy server connecting to web service over SSL

Hi Friends,
A web service is exposed by an external system over SSL. We are behind a proxy server and are trying to get connected to web service over SSL. 
We are getting the following error on the test browser of workshop
External Service Failure: FATAL Alert:HANDSHAKE_FAILURE - The handshake handler was unable to negotiate an acceptable set of security parameters.
the whole trace is 
JDIProxy attached
<Sep 24, 2005 9:27:25 AM EDT> <Warning> <WLW> <000000> <Id=creditCheckCtrl:salesExpertServiceControl; Method=creditcheckcontr
ol.SalesExpertServiceControl.doCreditVerification(); Failure=com.bea.control.ServiceControlException: SERVICE FAULT:
Code:javax.net.ssl.SSLHandshakeException
String:FATAL Alert:HANDSHAKE_FAILURE - The handshake handler was unable to negotiate an acceptable set of security parameters
Detail:
END SERVICE FAULT>
<Sep 24, 2005 9:27:26 AM EDT> <Warning> <WLW> <000000> <Id=creditCheckCtrl; Method=creditcheckcontrol.CreditCheck.testCreditC
heck(); Failure=com.bea.control.ServiceControlException: SERVICE FAULT:
Code:javax.net.ssl.SSLHandshakeException
String:FATAL Alert:HANDSHAKE_FAILURE - The handshake handler was unable to negotiate an acceptable set of security parameters
Detail:
END SERVICE FAULT [ServiceException]>
<Sep 24, 2005 9:27:26 AM EDT> <Warning> <WLW> <000000> <Id=top-level; Method=processes.CreditCheck_wf.$__clientRequest(); Fai
lure=com.bea.wli.bpm.runtime.UnhandledProcessException: Unhandled process exception [ServiceException]>
<Sep 24, 2005 9:27:26 AM EDT> <Error> <WLW> <000000> <Failure=com.bea.wli.bpm.runtime.UnhandledProcessException: Unhandled pr
ocess exception [ServiceException]>
I am not able to make out what could be possibly wrong. Please let me know if you guys have any ideas about how to resolve it.
Thanks
Sridhar

did you resolve this problem. I am looking at the same issue. If you did I would really appreciate your response.
Thanks.

Need help for publishing web intelligence document (universe) into InfoView

Post Author: mirage
CA Forum: Publishing
Hello all,
I need help for publishing web intelligence document (universe) into InfoView.
can't find this information in Business Objects Designer's Guide and in Business Objects Administrator Guide.
Can somebody give short instructions how can I do it?
Regards, Slava

If the change between the 2 types of data has to happen dynamically during run time them
1. Use 2 dataproviders
a. Current
b. Historic
2. Merge the 2 dimensions
3. Use Webi variable to switch between the measure of the current and historic universe
Ex if [year] < 2010 then historic.[expense] else current.[expense]
Hope this helps,
Divya

Connecting SAP ERP and SAP XI via RFC (in cluster)

Hi all,
I have a strange problem with SAP ERP and SAP XI (production systems). Both systems are installed in cluster. I am trying to connect both systems via RFC, so I configurred TCP connection using SM59. But, when I try to test connection, I am always getting error "Program xxxx is not registered". When I register the program on the sender communication channel on different system (develop system - different machine), connection works fine. Configuration on both SAP XI production and development systems is identical. I just cannot understand, why production SAP ERP does not see registered program on production SAP XI. Has anybody experiences with this? Or any other ideas where should be the problem?

Are you configuring the RFC Sender adapter with load balancing?
what is the hostname you're using for ERP?
Is it the message server's?
Also, make sure the dispatcher is properly configured, sending the requisitions to the application servers.
Regards,
Henrique.

SAP ERP == XI == SAP POS (Customer Data Maintenance)

Dear Friends,
   We are doing the scenario SAP ERP ==> XI ==> SAP POS. This is IDoc to File scenario. The file is picked from FTP site by receiver(where the Triversity server pick ascii files).
   Here problem is after picking the file, data is not inserted, updated, deleted in the Customer Profile table of Triversity Store Manager. (We follow the Technical Reference Guide for creating files).
Regards,
Jagan.

HI experts ,
   After integration of SAP retail and SAP POS, we are receiving file from PI for e.g DEPTTXN.asc (below) ,
              As according to DEPTTXN.ASC file format update type ,department, department group ,description should be of Decimal 2.0,decimal4.0, decimal 3.0 and string 20 respectively,
              But we are receiving data in below mentioned format ,because of that when we are posting this file to Xpress sever-> parm folder to view its data in Store manager we are not
              able see all the details of DEPTTXN.asc ,only price point details with the linked category and department are shown there. We are facing same difficulties with other two files also.
       Do we have to do some modification in PI for the naming of department and department group?
It will be great help ,if you can guide us to solve this particular issue.
99
2,MC11111,MC11110,"class. dresses, long",,,,,N,N,,Y,,,,,,Y,,,N,N,,,,,Y,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Y,,,,N,N,N,N,N,N,N,N,N,N,N,N,,,,,,,,,N,N
2,MC11142,MC11140,"skirts, short",,,,,N,N,,Y,,,,,,Y,,,N,N,,,,,Y,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Y,,,,N,N,N,N,N,N,N,N,N,N,N,N,,,,,,,,,N,N
2,MC11151,MC11150,"shirts, 1/1 sleeve",,,,,N,N,,Y,,,,,,Y,,,N,N,,,,,Y,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Y,,,,N,N,N,N,N,N,N,N,N,N,N,N,,,,,,,,,N,N
2,MC11152,MC11150,"shirts, 1/2 sleeve",,,,,N,N,,Y,,,,,,Y,,,N,N,,,,,Y,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Y,,,,N,N,N,N,N,N,N,N,N,N,N,N,,,,,,,,,N,N
2,MC11422,MC11420,"sweatshirts",,,,,N,N,,Y,,,,,,Y,,,N,N,,,,,Y,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Y,,,,N,N,N,N,N,N,N,N,N,N,N,N,,,,,,,,,N,N
2,MC11441,MC11440,"shirts,le.1/1 sleeve",,,,,N,N,,Y,,,,,,Y,,,N,N,,,,,Y,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Y,,,,N,N,N,N,N,N,N,N,N,N,N,N,,,,,,,,,N,N
2,MC11451,MC11450,"ties, classic",,,,,N,N,,Y,,,,,,Y,,,N,N,,,,,Y,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Y,,,,N,N,N,N,N,N,N,N,N,N,N,N,,,,,,,,,N,N
2,MC13101,MC13100,"meat, sausage",,,,,N,N,,Y,,,,,,Y,,,N,N,,,,,Y,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Y,,,,N,N,N,N,N,N,N,N,N,N,N,N,,,,,,,,,N,N
2,MC13102,MC13100,"fruits, vegetables",,,,,N,N,,Y,,,,,,Y,,,N,N,,,,,Y,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Y,,,,N,N,N,N,N,N,N,N,N,N,N,N,,,,,,,,,N,N
2,MC13103,MC13100,"dairy goods",,,,,N,N,,Y,,,,,,Y,,,N,N,,,,,Y,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Y,,,,N,N,N,N,N,N,N,N,N,N,N,N,,,,,,,,,N,N
2,MC13104,MC13100,"bread and pastries",,,,,N,N,,Y,,,,,,Y,,,N,N,,,,,Y,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Y,,,,N,N,N,N,N,N,N,N,N,N,N,N,,,,,,,,,N,N
2,MC14501,MC14500,"garden equipment",,,,,N,N,,Y,,,,,,Y,,,N,N,,,,,Y,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Y,,,,N,N,N,N,N,N,N,N,N,N,N,N,,,,,,,,,N,N
2,MC22003,MC22000,"Rolling trolleys",,,,,N,N,,Y,,,,,,Y,,,N,N,,,,,Y,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Y,,,,N,N,N,N,N,N,N,N,N,N,N,N,,,,,,,,,N,N
2,MC_ECKP,,"price point",,,,,N,N,,Y,,,,,,Y,,,N,N,,,,,Y,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Y,,,,N,N,N,N,N,N,N,N,N,N,N,N,,,,,,,,,N,N
HI jagan.
could you please share your mobile number.
regards
abhishek
09008833411
Edited by: abhishek011 on Jul 16, 2009 7:56 AM

Refresh of Data in Xcelsius from Web Intelligence Results

Hello,
I am new to the forum but not to Business Objects/Xcelsius. I attended the SAP Sapphire Event last May and spent time in the Business Objects lab. Two Product Managers demonstrated how I would be able to refresh the data in an Xcelsius dashboard using Live Office by retreiving results from a Webi document without refreshing the Webi query.
For example, my Webi document contains 100,000 result rows. I want to be able to select a dropdown in my dashboard and have Live Office retreive only a subset of the 100,000 rows. This being done without having the Webi query being refreshed from the database. The Webi query would be refreshed nightly.
The Product Managers advised that this functionality would be available in Service Pack 3 or before. As of now I cannot find out how to make this work. Any help or information would be appreciated. Thanks.

Hello Charles,
WebIntelligence Input Controls are a way to enhance and customize user experience with report filters, they are therefore based on report filters and the feature is more focused on user interface & experience rather than exposition outside web intelligence.
Anyway, AFAIK, report filters are not available from Live Office report parts, you can only filter content with prompts, which requires the document to be refresh from the database, which has a direct impact on performance and scalability for consumers.
However, if you are with WebIntelligence XI 3.1 SP2 you have the alternative to publish from WebI Rich Client, report elements (any table or chart) as web services (called BI Services).
This tool is based on Qaaws technology, and share some of its features (main being that is uses the same Xcelsius Data Manager connection), it exposes a large part of WebI interactions to external consumers (esp. Xcelsius) : report filters, drill, prompts.
Besides this tool provides a set of call input parameters to tune web service consumption for best performance and scalability, enabling to leverage WebI document management features like scehduling, publishing and refresh, so consumers can balance performance with real-time data.
More information is available from WebIntelligence Rich Client user documentation from section sharing webi content with other web applications.
I recommend you install the latest fix pack (SP2.5 and above), as some initial fixes were required to ensure full compatibility with Xcelsius.
Hope that helps,
David.

Date data from Web Intelligence Report not equal to Date from Source

Hi,
I am creating a Web intelligence report based on a BEx query. I have a field called 'Date' that I am bringing over from the BEx query. It has a format of MM/DD/YYYY. When I view the 'Date' in Web Intelligence, it is displaying as 1/1/70. For example, in the BEx Query, 'Date' = 11/01/2011. In Crystal Reports, it is showing up as 1/1/70 as the only date. The source field contains more than 1 date. I'm not sure what's going on. I am using the 14.0.0 (2010) version of the Web Intelligence through the BusinessObject Launch Pad.
Please help!
-Janice

Hi
The patches for SAP BusinessObjects BI4.0 are accumulative. This means you can download the latest patch (for the Support Package that you have installed) and it will have all the patch fixes
It looks like older patches are being removed from the sites & only the most recent patch or patches are available since they are accumulative
I believe Patch 2.15 should now be available, but anything later than Patch 2.6 should help you in this instance
I hope this helps
regards...ian

Limit send of IDoc from SAP-ERP to SAP-XI or a Non-SAP

Hi guys,
I send the following IDocs from SAP-ERP over SAP-XI to Non-SAP for an initialload: Artmas, Bommat, Infrec, Cond_a, Mmaddi, Cremas
Example: Artmas with TA: BD10.
Problem: SAP-ERP send all 25'000 IDoc to SAP-XI. The effect is that the qRFC and tRFC in SAP-XI is full, because the Non-SAP is not fast enough to takeover the Idocs. From then other systems can't send out or get in Idocs.
I tried to limit in WE20, but it didnt work. TA: RSEOUT00 ist not so useful, because of the quantity of the IDocs.
Is in SAP-ERP a possibility to limit the sending of IDocs to SAP-XI or Non-SAP?
Example: Automatic sending of 200 Idocs every 2 Minute.
Thanks

may be u can write a wrapper above BD10 this way
report zaRs message-id b1.
select-options: matsel for marav-matnr matchcode object mat1.
parameters: receiver like tbdlst-logsys no-display.
start-of-selection.
select * from mara into i_mara where matnr in matsel.
refresh : matsel.
v_no = 0.
loop at i_mara.
    move i_mara-matnr to matsel-low
* fill up sign option etc.
    append matsel
do.
   move mara
   if v_no = 200.
    submit rbdsemat " Program behind BD10
          with logsys eq receiver
          with matsel in matsel
          with mestypat eq 'ARTMAS'
          and return.
          wait 20 seconds
    exit.
    clear v_no.
   endif.
enddo.
a®

How to configure sap maxdb client to connect to SAP ERP system (SAP HR)

Hello all,
I am currently installing live cache for SAP ERP HR application(Idoc), can anybody tell me the sequence to proceed to configure SAP livecache with SAP ERP system. i am doing following steps
1. Install SAP DB using installation MAXDB CDs
2. Install SAP Livecache and standalone server SCM 5.0 using SAP ERP master and Livecache dvds.
3. install Livecache client fromSAP ERP master and livecache dvds between SAP ERP and livecache server.
4. configure in LC10, tcode.
but when i press on livecache monitoring in LC10 it gives me following error.
Command: DBMRFC
Parameter: -gsapfive -xsapgw00
SY-SUBRC: 8
Return Code
sap maxdb client

i tried the said things and after that i am getting following error in DB59, first three steps are successful but 4 one is failing.
Test Scope
1. Execute an external operating system command (DBMCLI)
2. Determine status using TCP/IP connection SAPDB_DBM (DBMRFC command mode)
3. Determine status using TCP/IP connection SAPDB_DBM_DAEMON (DBMRFC session mode)
4. Test the SQL connection (Native SQL at CON_NAME)
Application Server: <hostname>_<SID>_00 ( Windows NT )
1. Connect. test with "dbmcli db_state" Successful
2. Connect. test with command mode "dbmrfc db_state" Successful
3. Connect. test with session mode "dbmrfc db_state" Successful
4. Connect. test with "native SQL" ( LCA ) No connection
 SQL Code: 4008
 POS(1) Unknown user name/password combination
 For detailed information, see the developer trace for work process: 1
please see trace from file dev_rfc and dev_w0 below
log for dev_rfc
**** Trace file opened at 20110107 174356 Eastern Standard Time, SAP-REL 701,0,14 RFC-VER U 3 1016574 MT-SL
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: SAPLARFC (Transaction: )
User: MKUMAR (Client: 800)
Destination: IDOCTEST (handle: 2, , )
SERVER> RFC Server Session (handle: 1, 45030386, {9BAF1AE0-E29B-F1A3-9406-0019B9E204CC})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
SERVER> Called function module: ARFC_RUN_NOWAIT
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =IDOCTEST
HOST =%%RFCSERVER%%
PROG =IDOCTEST
Log from dev_w0
A RFC 1485 CONVID 47150684i tried the said things and after that i am getting following error in DB59, first three steps are successfuk but 4 one is failing
trace from file dev_rfc is below
**** Trace file opened at 20110107 174356 Eastern Standard Time, SAP-REL 701,0,14 RFC-VER U 3 1016574 MT-SL
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: SAPLARFC (Transaction: )
User: ABC (Client: 800)
Destination: IDOCTEST (handle: 2, , )
SERVER> RFC Server Session (handle: 1, 45030386, {9BAF1AE0-E29B-F1A3-9406-0019B9E204CC})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
SERVER> Called function module: ARFC_RUN_NOWAIT
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =IDOCTEST
HOST =%%RFCSERVER%%
PROG =IDOCTEST
A RFC 1485 CONVID 47150684
A * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
A RFC> ABAP Programm: SAPLARFC (Transaction: )
A RFC> User: abc (Client: 800)
A RFC> Destination: IDOCTEST (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 47149684, {FDB31AE0-D203-F1C0-9406-0019B9E204CC})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
A RFC SERVER> Called function module: ARFC_RUN_NOWAIT
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
M
M *****************************************************************************
M *
M * LOCATION SAP-Gateway on host <HOSTNAME> / sapgw00
M * ERROR program IDOCTEST not registered
M *
M * TIME Fri Jan 07 18:15:25 2011
M * RELEASE 701
M * COMPONENT SAP-Gateway
M * VERSION 2
M * RC 679
M * MODULE gwr3cpic.c
M * LINE 1778
M * DETAIL TP IDOCTEST not registered
M * COUNTER 715
M *
M *****************************************************************************
M
A RFC 1485 CONVID 47152747
A * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
A RFC> ABAP Programm: SAPLARFC (Transaction: )
A RFC> User: ABC (Client: 800)
A RFC> Destination: IDOCTEST (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 47151731, {FDB31AE0-D203-F1C1-9406-0019B9E204CC})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
A RFC SERVER> Called function module: ARFC_RUN_NOWAIT
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
Mani

Difference Between SAP ERP Financial & SAP Business One ERP?

Hi Everyone
I am very new in the world of SAP, I just want to know what is the difference between SAP ERP Financial and SAP Business One???
Thanks in advance
Cheers

Hi Farooque,
Welcome to SDN.
SAP ERP Financial
SAP ERP Financial provides a complete financial management solution for a broad range of industries. It's the leading enterprise software solution for accounting, financial reporting, performance management, and corporate governance.
The software solution offers depth of functionality in accounting, reporting, analysis, financial supply chain, and treasury management. Robust financial and management reporting, plus internal controls and documentation of all financial processes and transactions, ensures the highest levels of business analysis and governance.
It provides industry-leading support for local market requirements, languages, and currencies. It also supports a broad range of industry-specific processes and is compatible with all SAP industry solutions. Its scalable and open architecture is built for multinational organizations and connects financial management with existing business systems.
SAP Business One
SAP Business One is is an integrated, affordable, business management solution built from the ground up to meet the immediate and long-term needs of small and midsize businesses (SMBs). From general ledger and banking activities to service, sales, and inventory operations, SAP Business One provides all of the functions you need to gain greater control over your company and succeed in todays competitive business environment all in one easy to use, customizable, and scalable solution.
SAP Business One Financial Accounting delivers tools and reports that enable you to manage all financial processes, including:
- Chart of accounts -- Allows you to define all accounts and their hierarchical relationships
- Journal entries -- Allows you to enter or find manual journal entries and automatically allocate each transaction to a project or profit center
- Transaction templates -- Enables you to save time and prevent mistakes when entering manual journal entries
- Recurrent journal transactions -- Lets you create your own set of recurrent transactions, including automatic frequency reminders
- Exchange rate differences -- Adjusts foreign currency accounts to the changes in your local currency
- Trial balance report -- Displays account balances and transactions, enabling you to view all your financial reports in any desired currency and in each detailing level
- Profit and loss report -- Displays income and expenses in the conventional way used by accountants
- Balance sheet -- Displays assets and liabilities in the conventional way used by accountants
- Comparative reports -- Allows all reports to be displayed in a comparative view between months, quarters, years, or any other period
- Budget -- Helps you define and track your budget in any currency and view a summarizing budget report, which compares the actual versus the planned figures
- Financial reports designer -- Gives you the power to create unlimited financial reporting templates
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful.

How to get and use connection from Web AS 7.0 pool?

Hello!
I've set up a datasource and connection pool in my Web AS according http://help.sap.com/saphelp_nw70/helpdata/en/c0/3ad4d5cdc66447a188b582aad537d3/frameset.htm
And I have some questions about using connection pool:
1) here is my code which get connection form pool:
InitialContext ctx = new InitialContext();
DataSource datasource = (DataSource) ctx.lookup("jdbc/IndexesDataSource");
Connection con = datasource.getConnection();
return con;
Does it properly?
2) Which method I should call when I need to pass connection back to the pool? Will it be enough to call con.close()?
regards, Lev

Hi Lev,
Write code like this
try{
InitialContext ctx=new InitialContext();
DataSource ds=(DataSource)ctx.lookup("jdbc/indexsDataSource");
Connection con=ds.getConnection();
Statement stmt=con.createStatement();
con.close();
catch(Exception e)
wdComponentAPI.getMessageManager().reportException("Exception "+e,true);
also have a look at below links[Link|http://help.sap.com/saphelp_nw04/helpdata/en/61/fdbc3d16f39e33e10000000a11405a/frameset.htm][Link1|http://help.sap.com/saphelp_nw04/helpdata/en/46/ddc4705e911f43a611840d8decb5f6/frameset.htm][Tutorial|http://help.sap.com/saphelp_nw04/helpdata/en/91/9c2226df76f64fa7783dcaa4534395/frameset.htm]
Regards,
Krishna kattu

Error trying to create https connection from Web Dynpro

Hi experts!!
I am trying to create a WD view with an actionButton and a form template, when the user fills the data in the form and presses the button, i want to create an Https connect and post some parameters to the URL.
HttpsURLConnection cannot be resolved,
com.sun.net.ssl.internal.ssl.Provider() does't not exist in the package com.sun.net.ssl.internal.ssl.Provider()
do i need to add any jars?? I've already added the jsse.jar
The code i use is the following.
private void sendHttp(){
 String response = "";
 HttpsURLConnection connection = null;
 try {
 System.setProperty("java.protocol.handler.pkgs", "com.sun.net.ssl.internal.www.protocol");
 java.security.Security.addProvider(new com.sun.net.ssl.internal.ssl.Provider());
 URL url = new URL(<your_url>);
 connection = (HttpsURLConnection) url.openConnection();
 connection.setDoInput(true);
 connection.setDoOutput(true);
 connection.setAllowUserInteraction(true);
 connection.setUseCaches(false);
 } catch(Exception e) {
 response = response + "Error in getting connection: " ;
 response = response + e ;
 if (connection != null){
 try {
 connection.setRequestMethod("POST");
 connection.setFollowRedirects(true);
 //build all the parameters into 1 string
 String query = "parameter1name=" + URLEncoder.encode(parameter1value);
 query += "&";
 query += "parameter2name=" + URLEncoder.encode(parameter2value);
 connection.setRequestProperty("Content-length",String.valueOf (query.length()));
 connection.setRequestProperty("Content-Type","application/x-www- form-urlencoded");
 connection.setRequestProperty("User-Agent", "Mozilla/4.0 (compatible; MSIE 5.0; Windows 98; DigExt)");
 // open up the output stream of the connection
 DataOutputStream output = new DataOutputStream( connection.getOutputStream() );
 // write out the data
 int queryLength = query.length();
 output.writeBytes( query );
 output.close();
 //if responsecode <> 200 you should stop: should always be 200
 String responsecode = connection.getResponseCode();
 if (responsecode.equalsIgnoreCase("200")){
 String inputLine;
 StringBuffer input = new StringBuffer();
 BufferedReader in = new BufferedReader( new InputStreamReader(connection.getInputStream()));
 //Get site response
 while ((inputLine = in.readLine()) != null) {
 input.append(inputLine);
 in.close();
 response = response + input.toString();
 } catch(Exception e) {
 response = response + "Error in using connection: " ;
 response = response + e ;
 wdContext.currentContextElement().setResponse(response);

Hai ,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/526bd490-0201-0010-038e-d3ff7eb1d16e
please check above link .
application server u have take load balancing click on next there u take click on radio button of Msg server .
Regards ,
venkat

How to send data from WEBI HYPERLINK to SAP R/3

Can someone please help in sending the data from WEBI to R/3 system.
We created a universe on top of a BEX Query and on Top of that we created a web intelligence report.
Now our requirement is when we click on any record in BO web ntelligence report that data should get populated in SAP R/3 system FAGLL03 screen . How to send the data from WEBI to R/3 system.
Edited by: SAP BPS on Feb 5, 2010 6:23 AM

Herry,
You can refer the below docs for reference. Instead of receiver JDBC , you have to use Receiver as R/3.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a068cf2f-0401-0010-2aa9-f5ae4b2096f9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f272165e-0401-0010-b4a1-e7eb8903501d
I hope it helps.
Best regards,
raj.

Can i insert data in my database from a web intelligence report?

if that's not possible,can I do it from a stored procedure based Universe or with a derived table? Does BusinessObjects in general allow me to execute statements to insert data in my database?

Hi Erika,
afaik it is not possible write back to database from web intelligence .
from dashboards with web services you can achieve this.

When will the SAP Mobile BI Android SDK to embed analytic views (Web Intelligence reports and Dashboards) in custom mobile Android App be supported/

hi all,
SAP Mobile BI IOS SDK provides such SDK to embed analytic views (Web Intelligence reports and Dashboards) supported by the SAP BI application inside your own custom mobile applications, while Android SDK does not provide such sdk. I would like to know if there is any plan or roadmap to support this interface in Android SDK?

Thank you Vishwanath for your reply. We already developed an Android App, and just want to embed and open SAP BO report directly inside our own App, instead of launching SAP Mobile BI App.

Connection from Web Intelligence over Universe to SAP ERP without SAP BW

Similar Messages

Maybe you are looking for