ASN Config for SNC Integration

Hi All,
I am currently working on SNC 7.0 integration with ECC system.Our scenario has to be designed like this.
PI will be hosting a Webservice on the external partner and they will generate the ASN and the generated ASN will be routed to the SNC system.From there it will be routed to the backend ECC system.
I am aware that for routing the ASN from SNC to ECC we have the standard mapping available between Despatch delivery notification and DESADV.DELVRY03 in the standard SNC SWCV.
But for PI hosting the webservice,is there any standard WSDL for ASN config available?If it is available what is the corresponding Service interface and Operation Mapping?Please guide me on the same.
Incase there are no standard WSDLs available for ASN config in the service registry how can PI host the Webservice?
By default will there be any standard WSDLs publised in Service registry?
When we import a Standard SWCV will the WSDL get imported in Service registry automatically?
Any help is greatly appreciated.
Thanks,
Sowmya
Edited by: sowmya venkit on Oct 26, 2009 6:59 AM

Solved

Similar Messages

Problem with Outbound Interface for Party in Standard XI Content for SNC

Hi All,
I am configuring a standard XI Content for SNC, the ASN Processing (DIMP ERP Backend). The provided Integration scenario involves three swim lanes which corresponds to an ERP, SCM and an external system. The external system is as an application component that is designed for B2B communication, i.e. a service with party which is called Supplier.
The first action within the scenario is Create ASN in the Supplier swim lane and send a message to the action "Receive ASN and update inventory(in transit)" within the SCM system swim lane. I have created a sender party that corresponds to the Supplier swim lane and also a receiver party that corresponds to the SCM system. I used the Integration Scenario Configurator to assign services and also all the comm. channel. However, when i try to generate the logical routing objects and collaboration agreements, i get the error message that there was no outbound interface associated with the sender(the external system) defined for the first action. There is no option within the Integration Scenario Configurator on how to assign/define the outbound interface that I want to use for the sender.
I have no idea how to assign the outbound interface to the action for the Supplier swim lane in an Integration Scenario that is from an XI Content. Has anybody configured something similar or come across the same problem? Any info will be much appreciated.
Luqman

Hi,
This could be the problem of confilting namespace or combinations.
in receive action just check that right message interface is configured at Inbound side.
just check any place void ?
1)just check the name as case sensitive.
2)Just check is there interface belongs to right software component.
3)Just check mapping assigned to the right combination or not.
its better to cross check all the component are assigned to right place or not.
****if helpful then rewards points
Regards,
Sumit Gupta

Business Package for SNC

Hello experts,
I would like to know business package for SNC portal. in the below thread, Pankhuri mentioned that he has installed the business package for SNC. It would be great if some one explains about this package.
SNC and e- sourcing integration with SAP EP
Thanks and Regards,
Saravanan

Hello Saraa,
There is NO separate BP for Portal specific for SNC (not available in list of business packages by SAP and SNC 7.0 Master Guide)
SAP SNC as Add-On to SAP NetWeaver or SAP SNC as Part of a Full SAP SCM Server Installation
In case of former -
You need the Netweaver Stack of usage type PI / BI based on the requirements.
It is possible to use SAP Supply Network Collaboration (SAP SNC) together with SCM Basis outside of an SCM server installation. (Technically, SAP SNC and SCM Basis are add-ons to SAP NetWeaver.) SCM Basis includes all master data and functions that are cross-application-relevant for several SCM applications. The master data includes, for example, locations and products; the functions include SAP Core Interface for master data integration or the Transport Load Builder.
You can set up in SNC Web UI in web browser mode / SAP Easy Access Menu.
http://help.sap.com/saphelp_snc70/helpdata/EN/46/d5f1f27d701825e10000000a1553f6/frameset.htm
SAP Portal Business Package for SNC
~ Dhanz

CFolder and SNC Integration

Hi Experts,
We are integrating cFolder with SAP SNC (Supply Network Collaboration) application. Both SNC and cFolder application are installed on the same server. We have activated cFolder within SNC application. As per SAP help, we have not added any RFC destination for cFodler as it is on the same server as SNC.
Now when I try to open cFolder link from SNC application, it throws an exception
             "Error in CFX Call: An exception occurred that was not caught."
I checked ST22 for the error and found that the application is not able to find cFolder URL. It is failing at below code:
             get relative ERL
             e_url = cl_cfx_fol_ui =>get_url_for_fol(
                     icol_id        = l_col_id_str
                     i_area_id   = l_area_id_str
                     i_topic_id = i_topic_id_str
                     i_role         = ' ' ).
I can see that relative collaboration folders are created in cFolder. cFolder application when opened directly from SE80 is opening properly. So it is evident that SNC is able to communicate with cFolder and also able to create collaboration folder. However, when the cFolder window is opening, it fails.
Request you to please help on how to solve this issue.
Regards

Hi,
The DP & SNC cannot be integrated on the fly, SAP also does not give the option to enable the integration. Technically APO & SNC use two different databases. If there is a need there has to be custom development to achieve this.
There are numerous ways to achieve this using custom development. One possibility is download the keyfigures (forecast) & convert to the XML message (confirming the XML format required for SNC) then upload them using the SAP standard interface using SPROXY transaction. Now you can see the forecast data of DP in SNC.

KPRO for CAD Integration

Hello All.
Just wanted to cross check this from you. We have CAD Integrated with SAP.
1. We have Dev Box, Q Box and P Box. I would need a KPRO on 3 different boxes. Am I correct ? Also do I have to change setting in SPRO in Dev, Q, and P to point to the respective correct Box - how do I do this.
2. Also in Q-Box we have 2 different clients EQ50 and EQ100. Am I correct to say we will use the same EQ box and Partition it for EQ50 and EQ100, so that when I work in EQ50 the files can be saved in Partition in KPRO for EQ50 and when I work in EQ100, the files can be saved in different Partition. How to make this partition in KPRO and also how do I change SPRO config for KPRO for EQ50 and EQ100, to point to correct partition.
Thanks,
Sachin

Thank you very much for the useful link Martin. Anyway, there are some things that I cannot find for NX Unigraphics integration:
In the wiki you can find
You can download the CAD-Integration-Software from http://service.sap.com/swdc and then goto
Installations and Upgrades > Supplementary Components for Cross Industry Solutions > Life-Cycle Data Management > SAP PLM Integrations > select the desired integration
But that path does not exist in SAP download software page.
Also, in the availability matrix I can find integration with several systems (catia, solid edge, autocad...) but not unigraphics.
Could you please provide some more information on the topic?
Thanks a lot.
Neil

CONFIGURATION GUIDE FOR SNC

Hi,
Can anyone send me the config guide for SNC.
Thanks,
Manu

Dear Manu,
if you are thinking under SNC at Supply Network Collaboration then please read the following link for config: http://help.sap.com/saphelp_scm2007/helpdata/en/0d/3f809d9a58474eb689443d76415d8a/frameset.htm
if you are thinking under SNC at Secure Network Communications then please read the following link for config:
http://help.sap.com/saphelp_scm2007/helpdata/en/0d/3f809d9a58474eb689443d76415d8a/frameset.htm
Hope this helps.
Regards,
Tibor

DP and SNC integration

Hi,
How can we publish forecast results from APO demand planning to SNC directly and vice versa, without routing through R/3?
Regards,
Raghavendra Udupa

Hi,
The DP & SNC cannot be integrated on the fly, SAP also does not give the option to enable the integration. Technically APO & SNC use two different databases. If there is a need there has to be custom development to achieve this.
There are numerous ways to achieve this using custom development. One possibility is download the keyfigures (forecast) & convert to the XML message (confirming the XML format required for SNC) then upload them using the SAP standard interface using SPROXY transaction. Now you can see the forecast data of DP in SNC.

SNC Integration

Hi,
I am into new project right now....where I need to develop interfaces from SAP to SNC vice versa.
Can anybody share their experiences with SNC integration?
Whats the major difference between....Normal XI scenario than SNC integration.
-Esha

Nadh,
SNC integration would be the same as you do to a normal integration. The only difference is in a normal integration you have to built your own data types, message types etc.
But for SNC there is a predefined content given by SAP. So you can use them directly. Also they have predefined mappings where you can use them directly if you are using a standard messages. If their is customizations then you may need to change according to your requirements.
Check sap help link in the above reply which may give you an idea. If you have any specific question then post it here, somebody may help you.
---Satish

Steps for Email integration in sap crm system?

Hi Experts,
Please guide me the steps for email integration so that the emails are in syn with the WEB UI Interaction centre.Settings at the backend GUI are already defined.Actually in my case the Development system is not integrated with Email sync in WEB UI.I need to test the email functionality in Development system as steps I have followed are as below:
1)TCode :- SBWP,then I have created a mail & send it to email address which is defined in the SO28
2)TCode :- SOST,there I have clicked on my test mail,select it & click on execute button,green light appears & shows the message that the email is successfully forwarded.
Now when I open Web Ui,select my business role & then I go to inbox in the Navigation Bar,select email & click on search.Then it does not appear anything & shows search result zero.
Kindly suggest me the steps so that I can see my test email in Dev system Web Ui business role .
Thanks
Warm Regards
Vineet Joshi

Hi Prashant,
Thanks for your response. I want steps to configure communication channels like e-mail & fax to facilitate receipt of invoice from vendors, sending of PO to vendors, cheques, payment advices to name a few. Please let me know the detailed configuration steps for the same and also do we need to instal any tool to facilitate this process.
Thanks
Best regards,
Bhaskar
Edited by: Bhaskar Umashankar on Nov 25, 2008 4:08 AM
Edited by: Bhaskar Umashankar on Nov 25, 2008 4:08 AM

Config for Production client

Dear all,
I'm a new basis and now I'm working in big project ERP. I have a disturbed about config for Production client.
In scc4 we must set client role is Production and No change allowed for Objects. But in production some time we need do Open and Close Period, or change following business requirement, ... This is not allowed to do in Production client.
How do we config for Production client to cover this requirements ?
Do we need a config client for maintain Production client ? Example: Production client is 500, Config client is 100. When we need Open or Close Period or change anything, we do in 100 and transfer request to 500.
Thank you very much.
Regards,
Thanh.
Do not use text message language, the next time your thread will be deleted.
Read the "Rules of Engagement"
Edited by: Juan Reyes on Dec 1, 2010 11:06 AM

You can customize transaction to be executable although the setting in SCC4 is "productive", this is accomplished by using transaction SOBJ:
Note 1497640 - Open and close periods in productive client
You can theoretically put every customizing view there and make it "executable" in a production system.
Markus

How to use the same services-config for the local and remote servers.

My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
    <services>
        <service id="amfphp-flashremoting-service"
            class="flex.messaging.services.RemotingService"
            messageTypes="flex.messaging.messages.RemotingMessage">
            <destination id="amfphp">
                <channels>
                    <channel ref="my-amfphp"/>
                </channels>
                <properties>
                    <source>*</source>
                </properties>
            </destination>
        </service>
    </services>
    <channels>
    <channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
    </channel-definition>
    </channels>
</services-config>
I think the problem is the line
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
but I'm not sure how to use the same services-config for the local and remote servers.

paul.williams wrote:
You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
Hi Paul,
In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
-services=path/to/services-config.xml
IF
services-config.xml
have tokens in it and user have not specified additional
-context-root
and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
-services=path/to/services-config.xml
have been specified durring compilation.
I dont know any better way to exmplain this, but in summary there is two places that you can tell swf about service confogiration,
1) pass -services=path/to/services-config.xml parameter to compiler this way you tell swf file up front about all that good stuff,
or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime .

Error While Creating Technical System for SNC

Hi There,
I am trying to create technical system for SNC in SLD, I am not able to seee SNC as a s/w component/product in the list.
when I checked the list of components in SLD, I found SNC is there under product "SCMSNC" but this product is not in the list of products.
Please help me how I can get "SCMSNC" product in the product list.
Thanks,
Nishant

Can you please explain it little bit clearly?
I think you first create product, then SWC and then try to create Technical system.
While you will create the Technical system, in the last step it will ask you for installed products.
There you can specify ur product.
Thanks,
Hetal

Config for Dispatch Intrastat

Hello Experts,
Our client has a manufacturing plant in France which is already in SAP. Now they are planning to come up with another plant in France. We will be creating a new Company Code and Sales Org. My question is that since France is already in SAP and uses Intrastat reporting so do we need to make any config for new Plant/Sales Org or is the Intrastat setting defined at country level only.
Regards,
Karan

Hello Karan,
We are going to create a new Plant as well as a new Sales Organisation. In Intrastat there is one setting where we assign Business Transaction Type to Sales Org/Item Category combination. For the reference Sales Org this setting is already in place so do we need to do this setting for new Sales Org also or does it get copied when we create new sales org with reference to existing sales org?
In my view on the current set up which you are incorporating for new plant at France, there is no need to have new Company Code and Sales organization unless and untill there is some legal requirement at EU(If export process needs to be triggered). There is not much information available on Intrastat functionality but as i understand from you, you create Business transaction type at Intrastat, and then assign business transaction type to Sales organization, My suggestion would be :- most likely you would have to extend and include the newly created Sales Organization for Business transaction type.
Thanks,
Sarthak

Vendor Payment Terms config for 30%advance 70% after GR

Hi Guys,
How to configure Vendor Payment Terms for " Vendor Payment Terms config for 30%advance 70% after GR "
Please suggest your expert comments.
Thanks in advance.
Regards,
Jackie

sappassion2011 wrote:
Hi Guys,
>
> How to configure Vendor Payment Terms for " Vendor Payment Terms config for 30%advance 70% after GR "
>
> Please suggest your expert comments.
>
> Thanks in advance.
>
> Regards,
>
> Jackie
Hi Jackie,
Do them in trxn OME2
Regards
Shiva

What's the best Mac Pro config for Fireworks?

What's the best Mac config for Fireworks?
I can pretty much get whatever Mac I want at work... My boss is sick and tired of watching Fireworks crash all the time... I figure a hefty processor and lots of RAM and maybe a SSD will help…
I should get a Mac Pro right? Which processor?
• Two 2.40GHz 6-Core Intel Xeon processors (12 cores)
• Two 2.66GHz 6-Core Intel Xeon processor (12 cores)
• Two 3.06GHz 6-Core Intel Xeon (12 cores)
Should I get 24GB RAM?? Or is that overkill?
I'll get a 2TB serial hard drive…
I should get a 512 GB solid state drive offered by Apple right?
Or is it possible to get a larger better 3rd party SSD?
And then maybe two 21" Displays… Two 27s seems a little much… or does it?
Thanks in advance.

Oh and what about video cards? Or is Apple's default ok? (I'm not doing hard core PhotoShop retouching or anything).

ASN Config for SNC Integration

Similar Messages

Maybe you are looking for