Connection problems between logic Pro X and Mackie MCU PRO

Hello, I need help.
I bought a mackie MCU control PRO and don´t work on my Logic Pro x. Does anyone know if I have to do something in the logic to configure? or should it automatically go?
Thanks for your help
This is my equipment list if you have any questions;
MAc Book Pro, Maverik  IOX
Motu Ultralite
Mackie MCU PRO
Logic Pro X

Not enough information to help you.

Similar Messages

  • I have connection problems between the mini ipad and my powerbook g4, you are not allowed to see or share applications.

    I have connection problems between the mini ipad and my powerbook g4, you are not allowed to see or share applications.

    That is not possible.

  • Synchronization problems between Logic Pro 8 and Roland's groovebox MC-909

    Hi everybody,
    I recently purchased a (used) Roland MC-909 and tried to synchronize it with Logic but the whole procedure seems too complicated.
    Logic gets digital audio input (S/PDIF-RCA) from the MC-909 (through M-audio Fast Track Pro) and I've tried all shorts of adjustments (e.g. connecting Logic's MIDI out (through M-audio Fast Track Pro) to Roland's MIDI in port and the opposite with different master/slave setups etc.).
    I can't get these two to synchronize.I suppose there is a logical solution for everything,but I'm really running out of patience...
    I want to use Logic Studio to internally record Roland's (synchronized!!) audio output,avoiding sampling patterns from Roland and then transferring them to Logic (import audio file).After that,I would like to use these two combined in a live set.
    I hope there are people out there having faced similar problems in the past...share any bit of useful info please..
    Thanks everybody!
    Mario,Greece

    MIDI Out from Logic via the M-Audio interface.
    In Logic's synchronization setup, be sure "Transmit MIDI Clock" is enabled and the port is selected.
    In the Roland, set clock to external/slave, you may have to press play, the unit should now wait for, and sync to MIDI clock from Logic.
    caveat... I don't have a Roland unit, but this way ---should--- (hate that word) work.
    pancenter-

  • Bluetooth connectivity problems between Macbook Pro and iPad

    Good afternoon All,
    I am having problems sending files between my macbook pro (retina display) purchased today and my ipad (also purchased today).
    They will connect and pair, but when attempting to send a file my macbook will tell me that it is not possible due to "The device does not have the necessary service."
    Anyone know of a cure for this problem?
    Thank you!

    Bluetooth in iPad was designed only to work with keyboards, earphones or speakers.  It was not designed to, nor will it work as a file sender from one device to another.  Either sync the files to your iPad from your Mac via iTunes sync, or email them, or get a cloud service like Dropbox on your Mac and then download the Dropbox app on your iPad.  Put the files in your Drobox account on your Mac, then access them via the Dropbox App on your iPad.

  • Bluetooth Connection Problem between MacBook Pro

    I cannot get my MacBook Pro and iPhone 5 to connect via Bluetooth. The phone says that the MacBook is "unsupported". Bluetooth is obviously turned on for both devices, they can "discover" one another in that the same code on the MacBook and the iPhone show up, and when I push the button on the phone to connect them, it tells me the MacBook is unsupported, but the MacBook tells me it's successful. The Bluetooth File Exchange said the iPhone (and iPad, but at least I can get the iPad to connect via Bluetooth) said that neither of the devices have the "necessary services". As mentioned, I can get my iPad 3 and MacBook Pro to sync. I bought the MacBook in January so it's new. Thanks in advance for any and all help!

    An iPhone will not pair via Bluetooth to a computer (Mac or Windows) except for personal hotspot and then only if your cellular plan supports it. https://discussions.apple.com/docs/DOC-7722
    If you are attempting to use Handoff/Continuity, that does involve Bluetooth but the devices are NOT paired; Bluetooth just needs to be on and the devices in range of each other. The following may help with Handoff/Continuity issues: http://support.apple.com/kb/TS5458

  • Conflict between Logic Pro and external device error in Logic Pro X./cpu problems

    hi Logic users,
    using a MacBookPro 15 inch Retina, 2,7 GHz intel Core i7, 16 GB Ram, OSX 10,8,5, Logic X 10.0.4.
    i am wondering if you can help me out with the following problem i cant solve:
    when starting logic x with a not too big arrangement, lets say using one third to half of cpu, i open u-he plugin Diva and the cpu is going up on full range and the following error appears: "sample-rate 39299 (number always changes) reconized. Check conflict between logic pro x and external device"
    as external device im running a VirusTi and as audio-device Apogge Duet. when dis-connecting both devices, i have the same problem.
    putting the sample buffer up to the highest rate, doesnt change anything.
    same arrangements on friends computers dont show that problem, so it has to be something wrong in my set up.
    anybody has an idea?
    would be much appreciated for your help,
    thanx-

    Have you used Diva's preset Accuracy system to reduce CPU load?
    accuracy
    Click on the Main button at the bottom of the window. To the right of the Master section are two selectors called Accuracy and OfflineAcc. In the current version of Diva these are global parameters i.e. they remain fixed across all presets, per loaded instance:
    draft........CPU-friendly, but FM will sound rough and resonance is primitive i.e. NOT zero delay! fast......... Fine for older computers and/or when you need more polyphony in acceptable quality great...... The best compromise between quality and polyphony on high-power computers divine..... Top-quality zero delay feedback filters... but can your computer can handle it?
    OfflineAcc only has two options – same or best (i.e. divine in the current version).
    Some host applications may have problems rendering to audio at the selected accuracy, but the
    better ones include an “inform plug-ins of offline rendering status” or similar.
    I typically work in draft mode and then switch to Devine or best when freezing the track or bouncing the entire project...

  • Conflict between Logic pro 7.2.2 and DIGI002 using a macbook pro

    Hi.
    I'm running Logic pro 7.2.2 on a macbook Pro using a DIGI002 rack as audio interface. I experience an extremely bad performance from my computer and keep getting these warnings: "conflict between Logic Pro and external device (digi002)" and the application runs VERY slow! I have updated all drivers but that hasn't helped! I practically can't use Logic at all, as it complaints when hardly running any tracks in a session. Has anybody experinced or heard of it before? It has really started to get on my nerves!!!!

    Hi,
    I am running Logic Pro with a Digi002 Rack.My driver versions are:
    Digi Core Audio manager 7.1.1cs1
    ProTools LE v7.1.1cs1 also the first Intel compatible version of ProToolsLE.
    Logic Pro 7.2.2
    All of this works,and I even use the Digi002 also to playback audio from iTunes,iMovieHD,iDVD,and Quicktime Pro,without any problems at all.
    Are you able to run ProToolsLE well,or is it exhibiting the same problems?
    Are you using the internal drive as a record drive,or do you have an external firewire drive for audio? This is important.I would recommend NEVER using the internal drive for recording audio,it can make the drive unusable after a while.
    It would be good to know if you do have the latest drivers for the Digi002,and are able to run iTunes etc... If that is the case then going and removing all of Logic Pro preference files,and re-selecting the Digi002 interface as the audio hardware might do the trick.Also,check Audio Midi setup and make sure it sees the Digi002 correctly.
    Lastly,and this suggestion no one seems to give...is simply this:check ALL your firewire cables,and if they look even a little frayed,replace them.Also,please put the Digi002 in the following order,if you are daisy chaining multiple firewire devices:
    MacBook Pro
    \Digi002 Rack
    \\firewire hard drive(s)
    \\\any external DVD/CDburners,ESPECIALLY if the manufacturer recommends this position for heir device.
    \\\\any other external devices(cameras,printers,whatever)and have them OFF when running Logic or ProTools.
    I hope some of this helps,
    Cheers,
    Nick

  • Difference between logic pro 7 and 8

    I'm just wondering if there's a difference between the Logic Studio ($500), and Logic Pro 8..or does Logic Pro 8 simply come within the Logic Studio package? Is there a big difference between Logic Pro 7 and 8? Also, is it worth the $200 upgrade?

    Hi,
    Logic Studio: Logic Pro 8, Soundtrack Pro and MainStage.
    So yes, Logic Pro 8 is part of the 'Logic Studio' package, which also contains the two other apps.
    http://www.apple.com/logicstudio/
    Take a look at the Logic Pro 8/Logic Studio forum. There are mixed opinions on whether it is worth upgrading yet or not.
    Good Luck!
    Steve

  • Does Apple allow functionality between Logic Pro and Airport Express

    That's it... Does Apple allow functionality between Logic Pro and Airport Express.
    If not, Why not. It seems like such a logical Apple type solution. I looked and find it difficult to believe nobody has asked the question...

    There is your solution: http://www.rogueamoeba.com/airfoil/

  • Is there a difference between Logic Pro and Logic Pro X?

    Maybe this is a stupid question, but is there a difference between Logic Pro and Logic Pro X?
    Already thx!

    Hi
    Short answer: No
    Longer answer:
    Logic Pro X is the latest release version of the DAw known as "Logic Pro". Previous versions were: Logic Pro 9, Logic Pro 8 etc.
    There was also a "Logic Express" (no longer available) which, though similar to Logic Pro, was missing a few features of Logic Pro in it's later versions)
    This might add more details:
    http://en.wikipedia.org/wiki/Logic_Pro
    CCT
    edit
    AoS wrote similarly
    There you go then :-)

  • Connection problem between sap bw and EAI

    Hi
    Please
    I'd like to know why people who work on the part of my EAI project say there is a connection problem between eai and SAP BW. He explained that the connection is good at 12h AM and 16h PM the system was disconnected, he receive this error message:
    System.ServiceModel.Security.MessageSecurityException: The HTTP request is Unauthorized with customer authentication scheme 'Basic'. The authentication header received from the server was' Basic realm = "SAP NetWeaver Application Server [DB1/100].
    I like to know if this is a problem with sap bw (misconfiguration of authorisations) or at the eai.
    Cordialy

    Hello,
    we have 2 possiblities in BW to get data into BW.
    1) pull
    2) push
    I understodd that you want to push data to BW. Please have a look into the Howto paper: https://www.sdn.sap.com/sdn/developerareas/bi.sdn?contenttype=url&content=/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/how to send xml data to bw
    and
    https://www.sdn.sap.com/sdn/developerareas/bi.sdn?contenttype=url&content=/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/how to integrate bw to xi.pdf
    If you want to connect an external system to BW and extract data to BW and the BW system is the leading system.
    You need a RFC server, or UD connect (https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/943de6c3-0401-0010-b7a4-8b1af193f642) or you can use db connect or you can extract flat files.
    All of these possibilies are decribed in the online help and in howto papers.
    hope this helps
    Michael

  • Fix for Airport Wireless Connection Problem stating Self-Assigned IP and not wanting to connect in Lion OSX.

    Fix for Airport Wireless Connection Problem stating Self-Assigned IP and not wanting to connect in Lion OSX.
    Bought my girlfriend the newest Macbook Pro 13" and began experiencing problems with my wifi the moment we got home. Her Macbook would not connect to our home Wi-Fi while my old Macbook Late 2008 running Snow Leopard connected without a problem. Airport would say that it had a Self-Assigned IP address (168.x.x.x). Did not realize it was a Lion problem until after using her Macbook Pro and becoming jealous of the new OSX, I upgraded. Soon after I was unable to go online. Luckily I had my iPad 2 and I began to scoure the net for help. Ran into allot of suggestions but it was not until I tried the following all together was I able to share the good new, from my Macbook. Hope this works:
    First go to Preferences > Network and click on the cog next to the + and - on the sidebar and click Set Service Order
         - Move Wi-Fi to the top and click ok.
         - Set location to Automatic
         - Click Apply
         - Click Advanced
         - Click the "-" on the selected Wi-Fi router you wish to connect to
         - Click Apply
         - Click Lock to Prevent Further Changes
    Go to your Mac's harddrive, (Macintosh)
         - Go to Library > Preferences > SystemConfiguration >
         - Delete "com.apple.airport.preferences.plist" file
    Turn off your computer
         - push and hold Option+Command+R+P
         - turn on computer
         - when the grey screen turns on you will hear the OS X "ON" sound (for lack of a proper term) and it will momentarily restart.
         - you will once again hear the "ON" sound, let go of all keys.
         - this resets your PRAM
    Go to Preferences > Network > Advanced > + sign
         - click Choose a Network
         - Select your network and enter password
    Viola!!! I tried this on my Macbook Late 2008 and my girlfriends new Macbook Pro 2010

         No you are clearly mistaken. The Self-Assigned IP address problem exists on many Macbook Pro models, including the current model, which I mentioned as being the original computer with the problem. While my 2008 Macbook is older it was working perfectly on Snow Leopard and didn't suffer issues until switching to Lion. So clearly the problem exists on the operating system and not so much the hardware.
         I called Apple Support  and they had no fix for the problem and told me that this would hopefully be addressed in a subsequent update. It wasn't until I came accross the answer after trying many different methods that I got both of the Macbooks to connect to my router. Otherwise I wouldn't or could not have been surfing the internet for the last 4 months.
    Cheers.

  • Logic remote of my iPad is not connecting anymore with Logic Pro X of my i Mac

    Logic remote of my iPad is not connecting anymore with Logic Pro X of my i Mac.
    Pls help
    tks
    Kind Regards
    Richard Garrell
    Belo Horizonte
    Brazil

    Hi Richard Gl , 
    Welcome to the Apple Support Community!
    I understand that your Logic Remote is not connecting. In this situation I suggest reading over the attached information and making sure that Logic Remote is set up correctly. I would also suggest trying to connect using Wi-Fi and Bluetooth.
    Logic Remote for iPad: Get started
    Cheers,
    Joe

  • I cannot connect bluetooth between an iPhone 3GS and iPhone 4.

    I cannot connect bluetooth between an iPhone 3GS and iPhone 4S. Any reasons this might be happening? Any suggestions on how to fix it? Thank you.

    To access iCloud all your iPhone needs is iOS 5 or later and an Internet connection, either via cell service or WiFi. Then just set up iCloud with the same Apple ID and password you've been using on your iPhone 4.
    You might want to consider just getting your iPhone 4 replaced by Apple. Based on the prices I've seen for iPhone 3GS units, Apple's replacement price isn't that much more, and you'll be certain of getting a working, non-hacked iPhone.  Apple's replacement price for the iPhone 4 is US $149.
    http://www.apple.com/support/iphone/service/faq/
    Regards.

  • Problem with Logic Pro and Soft eLicenser on Mountain Lion?

    Hi!
    I have a bunch of Arturia synths, which requires the Soft eLicenser to work. This has always worked great with Lion, never any problems with eLicenser (never had to open it etc.)
    Now - I upgraded to Mountain Lion, and tested my synths to make sure everything was OK, experienced a bunch of problems, and did a full recovery to clean Mountain Lion.
    After installing the Arturia synths, and adding my licenses, I installed Logic. Everything worked fine!
    BUT!
    When I closed an Arturia synth within Logic, or closed Logic after running a project with one of these synths, I couldn't reopen any of these synths within Logic afterwards - In fact, I couldn't open the stand-alones either! And when I tried to open the eLicenser Control Center, it would just say "Reading eLicensers" forever. After a reboot, everything is OK.
    I can open and close eLicenser Control Center and standalone synths as many times as I want, as long as I don't open Logic, and then Arturia synths as an AU in Logic.
    I found a workaround: Open the eLicenser Control Center, and let in run in the background (cmd+H), and then open Logic. Then I could open Arturia synths and close them, close Logic and reopen etc. without any problems at all. NO PROBLEMS.
    Until I close the eLicenser Control Center, then I have to reboot to be able to start it again.
    I hope you understand what I mean here. It's a bit hard to explain.
    In short terms: Logic makes Soft eLicenser crash when a eLicenser synth has been opened as an AU.
    The same problem is when scanning the AU with AU manager. eLicenser window should be open before scanning.
    Does ANYBODY have the same problems? Can anyone who has these applications test it out?

    So it definitely seems to be a issue with Logic.
    I can't force this error in 10.7.X no matter how hard I try, but in 10.8.2 it's definitely Logic messing things up.
    Could it be auvaltool which has a bug? Or is that only run with AU manager on validation?
    Hopefully this discussion can get some attention, and maybe it could be corrected. I guess a lot of Logic Pro users also has eLicenser Control Center for validation of their products.

Maybe you are looking for