Connection to application server failed using SSL port Why?
Hi
i am trying to deploy my application created in Jdev11.1.1 to WLS10.3.
in creating connection to application server using SSl port 7002 my test connection is failed .the test connection status is
Testing JSR-88 ... failed.
[J2EE Deployment SPI:260010]Unable to connect to 't3s://localhost:7002' as user, 'weblogic'. Error received: null
Testing JSR-88-LOCAL ... failed.
[J2EE Deployment SPI:260010]Unable to connect to 't3s://localhost:7002' as user, 'weblogic'. Error received: null
Testing JSR-160 DomainRuntime ... failed.
t3s://localhost:7002: Destination unreachable; nested exception is:
java.net.ConnectException: Connection refused: connect; No available router to destination
Testing JSR-160 Runtime ... failed.
t3s://localhost:7002: Destination unreachable; nested exception is:
java.net.ConnectException: Connection refused: connect; No available router to destination
Testing JSR-160 Edit ... failed.
t3s://localhost:7002: Destination unreachable; nested exception is:
java.net.ConnectException: Connection refused: connect; No available router to destination
Testing HTTP ... failed.
Unable to open conection: Connection refused: connect
Testing Server MBeans Model ... failed.
t3s://localhost:7002: Destination unreachable; nested exception is:
java.net.ConnectException: Connection refused: connect; No available router to destination
0 of 7 tests successful.
what i have to do inorder to get successfull status.
but when i am using the port 7001,test connection status is successfull .
If it fails for your account and not for another, with the same settings on your phone, then the problem is with your account. If you or your IT department can't correct it, it may be corrupt. Delete the account from the Exchange server entirely and re-create it.
Similar Messages
-
How to Non-ACC Client connect Sun App Server 8 with SSL
I have create a Rich Client(Non-ACC) that connect to Sun App Server 8 with IIOP(8001) and is working fine. However, when I try to connect to same server with using SSL (8002) and throw exception during lookup a Bean as below.
Please help!!
Server Configuration
================
IIOP Port(s): 8001, 8002, 8003
All listener ports are enabled
Client Coding
===========
env.put(javax.naming.Context.PROVIDER_URL, "iiop://"+url);
env.put(javax.naming.Context.INITIAL_CONTEXT_FACTORY,"com.sun.appserv.naming.S1ASCtxFactory");
System.setProperty("javax.net.ssl.keyStoreType", "jks");
System.setProperty("javax.net.ssl.keyStore", "D:\\Sun\\AppServer\\domains\\adsr\\config\\keystore.jks");
System.setProperty("javax.net.ssl.keyStorePassword", "password");
System.setProperty("javax.net.ssl.trustStore", "D:\\Sun\\AppServer\\domains\\adsr\\config\\cacerts.jks");
System.setProperty("javax.net.ssl.trustStorePassword", "password");
System.setProperty("com.sun.CORBA.connection.ORBSocketFactory", "com.sun.enterprise.iiop.IIOPSSLSocketFactory");
ic = new InitialContext(env);
Object objref = ic.lookup("ejb20/statelessSession/EntControllerHome");
Exception
========
[java] Mar 18, 2005 4:43:59 PM com.sun.corba.ee.spi.logging.LogWrapperBasedoLog
[java] INFO: "IOP00710299: (INTERNAL) Successfully created IIOP listener on the specified host/port: all interfaces/4645"
[java] Mar 18, 2005 4:44:00 PM com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl readFully
[java] WARNING: "IOP00410215: (COMM_FAILURE) Read of full message failed :
bytes requested = 12 bytes read = 7 max wait time = 300 total time spent waiting = 364"
[java] org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 215 completed: No
[java] at com.sun.corba.ee.impl.logging.ORBUtilSystemException.transportReadTimeoutExceeded(ORBUtilSystemException.java:2629)
[java] at com.sun.corba.ee.impl.logging.ORBUtilSystemException.transportReadTimeoutExceeded(ORBUtilSystemException.java:2655)
[java] at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.readFully(SocketOrChannelConnectionImpl.java:676)
[java] at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.read(SocketOrChannelConnectionImpl.java:545)
[java] at com.sun.corba.ee.impl.protocol.giopmsgheaders.MessageBase.readGIOPHeader(MessageBase.java:119)
[java] at com.sun.corba.ee.impl.transport.CorbaContactInfoBase.createMessageMediator(CorbaContactInfoBase.java:153)
[java] at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.readBits(SocketOrChannelConnectionImpl.java:325)
[java] at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.handleEvent(SocketOrChannelConnectionImpl.java:1175)
[java] at com.sun.corba.ee.impl.transport.SelectorImpl.run(SelectorImpl.java:275)
[java] javax.naming.CommunicationException: Can't find SerialContextProvider [Root exception is org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 208 c
ompleted: Maybe]
[java] at com.sun.enterprise.naming.SerialContext.getProvider(SerialContext.java:133)
[java] at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:290)
[java] at javax.naming.InitialContext.lookup(InitialContext.java:347)
[java] at com.shkco.jaf.test.JAFLogonTest.connect(JAFLogonTest.java:110)
[java] at com.shkco.jaf.test.JAFLogonTest.setUp(JAFLogonTest.java:134)
[java] at junit.framework.TestCase.runBare(TestCase.java:125)
[java] at junit.framework.TestResult$1.protect(TestResult.java:106)
[java] at junit.framework.TestResult.runProtected(TestResult.java:124)I don't think tomcat supports the ejb-ref portion of web.xml. If you're using ejbs your best bet is to use a web container within a J2EE implementation.
--ken -
The attempt to connect to the server (IP address) on port 443 failed - OLT
Hi all
I am facing one problem, if i run load to any application for 100 users for 1 iteration then it is not showing any error. Lets say i ran the load of 100 users for one hour then for some users there are errors like
Line: (script.java:84)][ScriptException]: The attempt to connect to the server (IP address) on port 443 failed.
And my understanding is the user's which are facing failures is not able to get response or page loaded at their end. As failures are occuring for some particular steps not the entire scenario. Pls confirm.
ThanksI believe that's an indication that there is an error receiving mail, but if you have any drafts or email in your outgoing mailbox, try deleting them. Apple's troubleshooting steps for this are (from http://support.apple.com/kb/TS4002):
Cannot receive mail in OS X Mail
If you use OS X Mail, look at the name of your iCloud account on the left side of the main Mail window. If your iCloud account name is dim and has a lightning bolt next to it, your account is offline. To resolve this, make sure your computer is connected to the Internet. Then choose Go Online from the Mailbox menu.
If taking your iCloud account online doesn't resolve the issue, follow these steps:
From the Mail menu, choose Preferences.
In the Preferences window, click the Accounts tab if it is not already selected.
In the Accounts list, select your iCloud email address.
Click the Account Information tab.
Verify your SMTP server settings with the following information:
Incoming Mail Server: imap.mail.me.com
User Name: Your iCloud email address
Password: Your iCloud password
Click the Advanced tab and verify the following additional settings:
Port: 993
Use Secure Sockets Layer (SSL): Should be enabled
Authentication: Password -
i am using iphone 4 ios 6.1.3, after hotmail imap setup, error showing "CANNOT GET MAIL" tHE CONNECTION TO THE SERVER FAILED. its happening since 14 aug. plz help !
I have trouble with sending e-mail and syncing e-mail. Try changing to 1 day sync under settings. It's sluggish but it works for me until they resolve the issue. MS claims all is normal. If you still have a problem you should report it here: https://status.live.com/report/hotmail
-
Hello,
I bought a used Apple IPHONE 4S about 6 weeks ago. For all this past period, it was working beautifully. This morning, I started having poblems with connecting JUST on OUTLOOK or Hotmail and on Microsoft Exchange. All other programs, such as Gmail, Yahoo as well as other apps, such as Facebook, Whatsapp, Facetime, are ALL working properly.
the One problem I am having is when I try to log onto my Outlook ( ex Hotmail) account, I get a window with the following warning:
"CANNOT GET MAIL. THE CONNECTION TO THE SERVER FAILED"
I have done everything to solve it from taking out the card to switching it off to resetting the network to deleting my account to re-starting ..NOTHING worked.
PLEASE can you advise me what to do? The Network server was working great. So what happened and how can i fix it?
Thank you
Nina ...The issue isn't with Apple/iphone or your network.
The issue is with Hotmail, there have been a ton of threads on this already with other user having issues.
You'll have to wait until hotmail resolves the issue.
link http://status.live.com/ -
Hi i m using 4s and its updated but i cant configure with microsoft exchange for my gmail account. Anytime i tried to configure it the message comes connection to the server failed. Pls help me out.
<Email Edited by Host>Discontinued by Google. Read here:
http://googlesystem.blogspot.com/2012/12/google-sync-discontinued-for-gmail.html -
Hi, my mail applicatin is not working properly. It says cannot get main...the connection to the server failed but everything else is working ok. How can I solve this problem?
The connectivity test indicated that there was a problem with the user's ActiveSync folder, typically fixed by checking the box "Allow inheritable permissions ...".
Since it already was checked and even by removing the inherited permissions and then re-inheriting them didn't do the trick, I ended up just deleting the whole thing and then made a new duplicate account and blank mailbox. That was pretty drastic
but it fixed the problem. After restoring his mailbox contents from backup, the user is now a happy camper.
The connectivity test tool was helpful because the external URL was blank so I filled in the URL. But ActiveSync was working fine for everybody without the URL before although I don't know why it did work without it.
The other funny thing is on one of my iPads I am able to synch my mailbox and also the user's mailbox but on another iPad it just wouldn't synchronize when it worked before I added the external URL. The iPads have the same OS version so I
just don't understand it. Oh well.
Thanks for your help. That was a good tip!
WC -
Sapwebdispatcher: ERROR: Connection to message server failed
Hi Team,
We have been facing an issue on the webdispatcher. Web-disaptcher is notable to communicate with the Message Server[PRD-XI].
=====================
Environment: Set-up =
=====================
1. The Webdispatcher is in DMZ. We have opened the port 8100 at the firewall.
==========================================================================
ERROR MESSAGE
==========================================================================
[Thr 2058] Fri Jan 11 18:53:27 2008
[Thr 2058] *** ERROR => NiBufIConnect: non-buffered connect pending after
5000ms (hdl 4;10.1.10.56:8100) [nibuf.cpp 4611]
[Thr 2058] *** ERROR => Connection request from (-1/65535/0) to host:
10.1.10.56, service: 8100 failed (NIECONN_REFUSED)
[icxxconn_mt.c 2738]
[Thr 2058] *** ERROR => IcmConnClientRqCreate() failed (rc=-8)
[icrxx_mt.c 5100]
[Thr 2058] *** ERROR => Could not connect to SAP Message Server at
10.1.10.56. URL=/msgserver/text/logon?version=1.2 [icrxx_mt.c 2459]
[Thr 2058] *** ERROR => rc=-1, HTTP response code: 0 [icrxx_mt.c 2460][Thr 2058] *** ERROR => see also OSS note 552286 [icrxx_mt.c 2461]
==========================================================================
SAPWEBDISPATCHER VERSION DETAILS:
==========================================================================
wd011:wpiadm 73> sapwebdisp -v
SAP Web Dispatcher Version 7.00.10, multithreaded, ASCII, 64 BIT
kernel information
system name =
kernel release = 700
database library =
compiled on = AIX 2 5 005DD9CD4C00
compile time = May 19 2007 01:59:47
update level = 0
patch number = 110
source id = 0.111
supported environment
operating system
AIX 1 5
AIX 2 5
AIX 3 5
=============================================================================
TEST OUTPUT
==========================================================================
wd011:wpiadm 71> sapwebdisp -bootstrap
SAP Web Dispatcher Bootstrap
============================
This bootstrap will perform the following steps:
1. create profile file "sapwebdisp.pfl"for SAP Web Dispatcher (if not
already existing)
2. create user for web based administration in file "icmauth.txt"(if notalready exisiting)
3. start SAP Web Dispatcher with the created profile
After the bootstrap you can use the web based administration
Generating Profile "sapwebdisp.pfl"
Hostname of Message Server (rdisp/mshost): 10.1.10.56
HTTP Port of Message Server (ms/http_port): 8100
Checking connection to message server...
ERROR: Connection to message server failed: NIECONN_REFUSED
Do you want to continue with these settings? no
==========================================================================
BACK-END APPLICATION MESSAGE SERVER DETAILS: SID: PPI [PI/XI]
==========================================================================
icm/server_port_0 PROT=HTTP,PORT=80$$
ms/server_port_0 PROT=HTTP,PORT=81$$
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 1] Thu Jan 3 15:31:05 2008
[Thr 1] WLM Tag 'PPI/MSG' successfully set for this process
[Thr 1] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 324 (IBM RS/6000 with AIX)
relno 7000
patchlevel 0
patchno 110
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 2519162
[Thr 1] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2519162)
[msxxserv_mt. 1824]
[Thr 1] SigISetDefaultAction : default handling for signal 20
[Thr 1] load acl file = /usr/sap/PPI/SYS/global/ms_acl_info
[Thr 1] MsGetOwnIpAddr: my host addresses are :
[Thr 1] 1 : [10.1.10.56] pi100 (HOSTNAME)
[Thr 1] 2 : [127.0.0.1] loopback (LOCALHOST)
[Thr 1] 3 : [10.1.99.4] pi100v (NILIST)
[Thr 1] MsHttpInit: full qualified hostname = pi100
[Thr 1] HTTP logging is switch off
[Thr 1] set HTTP state to LISTEN
[Thr 1] ms/icf_info_server : deleted
[Thr 1] *** I listen to port sapmsPPI (3600) ***
[Thr 1] *** I listen to internal port 3900 (3900) ***
[Thr 1] *** HTTP port 8100 state LISTEN ***
[Thr 1] CUSTOMER KEY: >R1306811094<
[Thr 1] Thu Jan 3 15:31:28 2008
[Thr 1] MsHttpReadUrl2: H-1 url = /sap/public/icf_info/urlprefix (403
Forbidden)
[Thr 1] MsHttpReadUrl2: H-1 url = /sap/public/icf_info/logon_groups (403
Forbidden)
======================+++++++++++++++++++++++++++==============================
Please find the attached file for a better understanding of the trace file.
A quick action on this would be much appreciated.
Please let me know for any information required.
Thank you.
Regards,
~sagarVipin,
I don't have access to our firewall myself to confirm what ports and services we opened (I worked with our Network Operations team to get this done), but if I recall correctly, it was pretty limited, just http and https over tcp ports 80, 443, 8100, and 8101. Probably could even restrict that to just https over 443 and 8101. However, from your configuration, you don't yet have your web dispatcher configured to talk to your message server over https, only http. I would recommend that you get the web dispatched completely configured and working in as close to your final desired configuration as possible while keeping it inside your firewall, not your dmz. Then move it to the dmz and see what breaks, and that way you know it's just the firewall that needs configuration at that point.
To configure the SSL termination, the following are the parameters required and the way that I configured them in our scenario (which terminates incoming SSL requests and re-encrypts them when sending them on to the backend, and also uses SSL for message server communication):
rdisp/mshost = mshost.domain.org
ms/https_port = 8101
wdisp/server_info_protocol = https
wdisp/group_info_protocol = https
wdisp/url_map_protocol = https
icm/server_port_1 = PROT=HTTPS,PORT=443,TIMEOUT=30,PROCTIMEOUT=600
icm/server_port_2 = PROT=HTTPS,PORT=8101,TIMEOUT=30,PROCTIMEOUT=600
icm/host_name_full = wdhost.domain.org (note, use the externally visible name as registered on your SSL certificate for web dispatcher here; does not need to match the actual machine hostname, but must be resolvable in external DNS)
icm/HTTP/admin_0 = PREFIX=/sap/admin,DOCROOT=\usr\sap\RW1\W00\data\icmanroot/admin,AUTHFILE=\usr\sap\RW1\SYS\global\security\data\icmauth.txt,PORT=8101
ssl/ssl_lib = $(DIR_EXECUTABLE)\sapcrypto.dll
ssl/server_pse = $(DIR_INSTANCE)\sec\SAPSSLS.pse
ssl/client_pse = $(DIR_INSTANCE)\sec\SAPSSLC.pse
wdisp/ssl_encrypt = 2
wdisp/ssl_auth = 1
is/HTTP/show_detailed_errors = FALSE
wdisp/permission_table = $(DIR_INSTANCE)\sec\ptab
On the backend host I have the following parameters:
sec/libsapsecu = \usr\sap\RP1\DVEBMGS00\exe\sapcrypto.dll
ssl/ssfapi_lib = \usr\sap\RP1\DVEBMGS00\exe\sapcrypto.dll
ssl/ssl_lib = \usr\sap\RP1\DVEBMGS00\exe\sapcrypto.dll
ssf/name = SAPSECULIB
icm/server_port_2 = PROT=HTTPS,PORT=443,PROCTIMEOUT=-1
ms/server_port_1 = PROT=HTTPS,PORT=8101
Naturally, a server certificate is configured on the backend that the web dispatcher trusts (it can be an internally generated certificate; the outside public just needs to trust the web dispatcher's certificate, so that one should come from a recognized CA). Port 8101 is NOT open from the outside, just from the dmz and only to/from the web dispatcher host (this does allow me to use the webadmin interface from the inside). The https service also has to be activated on the backend in SMICM.
There's good advice about security setup for the web dispatcher in Note 870127, and troubleshooting advice in the Note mentioned in your tracefile output, 552286. Fairly complete documentation is in the online help at http://help.sap.com/saphelp_nw70/helpdata/en/de/89023c59698908e10000000a11402f/frameset.htm. Note 538405 is also good, more for performance configuration than security.
I hope you find this helpful.
--Matt -
Connection with license server failed
Hi, I am having problem connecting with my license server when I am using the DI Server (webservice).
Error encountered:
Error env:Receiver 100000001 Connection with license server failed.
Does anyone know what is the best practice for this configuration? Thanks.
Regards,
RodmannHi Alvin,
I am having the same problem on one of my development machine. I have installed DI Server and Server Tools on it.
The license manager is working fine.
But when I try to connect to the company object in a web application it just throws the same exception
Error:Receiver 100000001 Connection with license server failed.
To test the port 30000 i changed it to any thing like 1234 and it gave me message "Failed to connect to license server", changing it back to 30000 and connect brings in all the hardware/license keys etc.
Kindly help what you did in your case to get rid of this problem.
Experts you support in this regard will be highly appreciated.
Kashif -
RFC_ERROR_COMMUNICATION: Connect to message server failed
Hi,
I think this is the most common error that one can face and have seen quite a few threads in the forum. Still, i couldn't resolve my problem.
I am getting the following error when i tried to connect to SAP using SAP JCO connector with load balancing.
(102) RFC_ERROR_COMMUNICATION: Connect to message server failed
Connect_PM MSHOST=sapserver, R3NAME=D11, GROUP=Group1
LOCATION CPIC (TCP/IP) on local host
ERROR partner not reached (host sapserver, service sapmsD11)
TIME Wed Jun 24 16:05:49 2009
I added the service sapmsD11 in the services file of my client as well as in R/3 server.
I got the above error when i tried to connect using load balancing. Without load balancing, i was able to connect to R/3 server successfully. Can any one tell how to figure out the message server host name ?
Can the application server host name and message server host name be same ?
PS: I am able to ping my R/3 server from my client.
Thanks,
Prasad.Hi,
Check that you have configured properly using the below document. And check the message server of R/3 is configured properly in the SLD.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0c1d495-048e-2b10-babd-924a136f56b5
Function module to get the message server host name and port in R/3.
SLDAG_GET_MESSAGE_SERVER_INFO
See this thread also..
Re: Jco Destination
Regards,
Charan -
How to resolve "Connection to LDAP server failed." error?
Hello,
I have installed Coldfusion8 on one of my server that was having ColdFusionMX earlier.
The ColdFusionMX admin settings are automatically transferred to the new Coldfusion8 admin page after installation.
Also I have configured all my websites at the time of installation.
After all when I am trying to login into one of my website system is throwing the below error.
"Connection to LDAP server failed."
Prevously it was working well with coldfusionMX. After installed Coldfusion8 I am facing this problem.
Is there anything to do more with cf admin settings page or is this problem is with the code? (Infact I havent modified my cfm code)
Please find the piece of code that I am using.
<cfldap action="QUERY" server="#application.LDAPServer#" port="#application.LDAPPort#" start="#application.LDAPBase#" name="search" attributes="alias, dn, uid, technicalCareerLevel, locationorgunit, givenName, sn" filter="#filter#" scope="SUBTREE" maxRows="2">
Anybody can assist me on this?
Thanks in advance.
Manoz.I have fixed this problem successfully.
The problem was with the referral attribute of the cfldap tag.
After adding this (referral="yes") attribute to my code I am able to login into my website.
<cfldap action="QUERY" server="#application.LDAPServer#" port="#application.LDAPPort#" start="#application.LDAPBase#" name="search" attributes="alias, dn, uid, technicalCareerLevel, locationorgunit, givenName, sn" filter="#filter#" scope="SUBTREE" maxRows="2" referral="yes">
Any way thanks for your assistance!!!!! -
The connection to the server failed pops up when I try to get mail
What do I do to get mail? Every time I try to connect a message comes up that says "the connection to the server failed."
Which ISP - perhaps your settings are incorrect? You could try using SSL &/or change your port # to see if that helps.
-
the note says the connection to the server failed. i can get everything else off the internet but not my mail. i think i was checking out the icloud and might have accidently done something with my email to make it stop being available to me. how can i check out the icloud issue? I have never used icloud before.
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
Cannot get mail the connection to the server failed. How do I resolve this
CAn anyone help?., please! I am getting error message Cannot get mail The connection to the server failed. I have switched on and off and can log into safari and send emails. This is my first blip with my ipadwhich has been amazing. Help, please. Thank you
siOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
The iPad's Mail app has no provisions for creating groups. However, you canuse a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
Cannot get e-mail on iPod, connection the the server failed how do I resolve this problem
I cannot get e-mail on my ipod, it says connection to the server failed. How do I resolve this issue?
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
The iPad's Mail app has no provisions for creating groups. However, you canuse a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom
Maybe you are looking for
-
Usb drawing too much power on my new ipod 7.
when i plug in my "lightning cord" i get an error message that goes a lil somethin like this: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled. To prevent damaging your computer, t
-
Itunes - Keep getting an error message after installation
Hi there, I have Vista and have downloaded the latest itunes package and then installed it on my pc, everyting installs ok, but then when i click the icon to launch the program i get a message saying there should be a folder called itunes which is us
-
Hi I've got 3 internal hard drives on my Mac pro -1 x 320 and 2 x 750 - my Macintosh HD is the 320, my Media A - has all video, Media B is time Machine BU...so the 320 and Media B are both Mac OS Extended (Journaled)...but the Media A drive is only f
-
VIs that are never called or changed but always have "unsaved" changes
I have a large project. Whenever I close it, I always get a pop-up telling me that the same 7 sub-VIs have unsaved changes. I have not edited or changed these VIs in over a year. They are called by sections of the program that are conditionally di
-
Uh-oh... Boot failure, out of the blue
Got nothing but a loud fan sound when I turned on my G5's power this morning. No chime, nothing. I forced shutdown by holding the power button; then I disconnected the power cord for a minute. Next boot was completely normal, and it has been running