The attempt to connect to the server (IP address) on port 443 failed - OLT

Hi all
I am facing one problem, if i run load to any application for 100 users for 1 iteration then it is not showing any error. Lets say i ran the load of 100 users for one hour then for some users there are errors like
Line: (script.java:84)][ScriptException]: The attempt to connect to the server (IP address) on port 443 failed.
And my understanding is the user's which are facing failures is not able to get response or page loaded at their end. As failures are occuring for some particular steps not the entire scenario. Pls confirm.
Thanks

I believe that's an indication that there is an error receiving mail, but if you have any drafts or email in your outgoing mailbox, try deleting them. Apple's troubleshooting steps for this are (from http://support.apple.com/kb/TS4002):
Cannot receive mail in OS X Mail
If you use OS X Mail, look at the name of your iCloud account on the left side of the main Mail window. If your iCloud account name is dim and has a lightning bolt next to it, your account is offline. To resolve this, make sure your computer is connected to the Internet. Then choose Go Online from the Mailbox menu.
If taking your iCloud account online doesn't resolve the issue, follow these steps:
From the Mail menu, choose Preferences.
In the Preferences window, click the Accounts tab if it is not already selected.
In the Accounts list, select your iCloud email address.
Click the Account Information tab.
Verify your SMTP server settings with the following information:
Incoming Mail Server: imap.mail.me.com
User Name: Your iCloud email address
Password: Your iCloud password
Click the Advanced tab and verify the following additional settings:
Port: 993
Use Secure Sockets Layer (SSL): Should be enabled
Authentication: Password

Similar Messages

Error Message: The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. The request failed with HTTP status 404: Not Found.

I have a web page that contains a ReportViewer control. I am trying to display a report, which is an .rdl file located on the SSRS server, in this ReportViewer control. I have set the ReportPath and ReportServerUrl correctly. I am
getting an error message.
Am I suppose to use an .rdlc file rather than a .rdl file? Does the web server configuration need to use a certain account?
I am getting the following error message:
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.
The request failed with HTTP status 404: Not Found.

Hi bucaroov,
The error "The request failed with HTTP status 404: Not Found." means the ReportServerURL configured in the ReportViewer control is invalid.
Please follow these steps to solve the issue:
Logon the Report Server machine.
Open the Reporting Services Configuration Manager.
Copy the Report Server URL from 'Web Services URL'.
Logon the application server(in this case, it is the server that host the web page), check if we can use the URL we got from step 3 to access the Report Server. If so, please replace the ReportServerURL in the ReportViewer control with this URL. If it is
not available, could you please post the error message.
Additionaly, we don't need to provide the extension for a server report. The ReportPath should be like: /<reports folder>/<report name>
For more information, please see:
Walkthrough: Using the ReportViewer Control in Remote Mode:
http://msdn.microsoft.com/en-us/library/ms251669(VS.80).aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT

Icloud found a mistake under the attempt to connect to the server

I can not log inn!
Pop up window says on my PC (IPhone and Ipad works):
icloud found a mistake under the attempt to connect to the server.
What to do??

Jan Odegaard wrote:
I can not log inn!
Pop up window says on my PC (IPhone and Ipad works):
icloud found a mistake under the attempt to connect to the server.
What to do??
Tell us what the PopUp actually said, post a screenshot please.

The attempt to connect to the server on port 80 failed code error 12029

This error while playback of webapplication in the open script used for the load testing
I need some solution to solve this issue
The attempt to connect to the server on port 80 failed. Comparable WinInet error code: Error 12029: ERROR_INTERNET_CANNOT_CONNECT. Caused by: java.net.NoRouteToHostException occurred. Error Message: No route to host: connect
Error in section Run at line (script.java:37). The attempt to connect to the server metric.ind.rediff.com on port 80 failed.
Comparable WinInet error code: Error 12029: ERROR_INTERNET_CANNOT_CONNECT. Caused by: java.net.NoRouteToHostException occurred. Error Message: No route to host: connect
oracle.oats.scripting.modules.basic.api.exceptions.ScriptException: The attempt to connect to the server metric.ind.rediff.com on port 80 failed.
Comparable WinInet error code: Error 12029: ERROR_INTERNET_CANNOT_CONNECT.
     at oracle.oats.scripting.modules.http.api.ThinBrowser.createResponseFromHttpJob(ThinBrowser.java:306)
     at oracle.oats.scripting.modules.http.api.ThinBrowser.navigate(ThinBrowser.java:217)
     at oracle.oats.scripting.modules.http.api.ThinBrowser.navigate(ThinBrowser.java:183)
     at oracle.oats.scripting.modules.http.api.HTTPService.navigate(HTTPService.java:635)
     at oracle.oats.scripting.modules.http.api.HTTPService.navigate(HTTPService.java:1823)
     at oracle.oats.scripting.modules.http.api.HTTPService.get(HTTPService.java:2333)
     at oracle.oats.scripting.modules.http.api.HTTPService.get(HTTPService.java:2300)
     at script.run(script.java:37)
     at oracle.oats.scripting.modules.basic.api.IteratingVUser.run(IteratingVUser.java:262)
     at oracle.oats.scripting.modules.basic.api.internal.IteratingAgent.run(IteratingAgent.java:632)
     at java.lang.Thread.run(Thread.java:619)
Caused by: java.net.NoRouteToHostException: No route to host: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
     at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
     at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
     at java.net.Socket.connect(Socket.java:519)
     at oracle.oats.lbrowser.http.RSyncConnection.connect(RSyncConnection.java:480)
     at oracle.oats.lbrowser.http.RSyncConnection.runCurrentJob(RSyncConnection.java:871)
     at oracle.oats.lbrowser.http.RSyncConnection.IRBrowserConnection_doJob(RSyncConnection.java:201)
     at oracle.oats.lbrowser.http.RBrowser.Navigate(RBrowser.java:899)
     at oracle.oats.lbrowser.http.RBrowser.Navigate(RBrowser.java:833)
     at oracle.oats.lbrowser.http.RBrowser.Navigate(RBrowser.java:798)
     at oracle.oats.scripting.modules.http.api.ThinBrowser.navigate(ThinBrowser.java:212)
     ... 9 more
14:57:18,531 ERROR [1] Iteration 1 failed at line (script.java:37). The attempt to connect to the server metric.ind.rediff.com on port 80 failed.
Comparable WinInet error code: Error 12029: ERROR_INTERNET_CANNOT_CONNECT. Caused by: java.net.NoRouteToHostException occurred. Error Message: No route to host: connect
oracle.oats.scripting.modules.basic.api.exceptions.ScriptException: The attempt to connect to the server metric.ind.rediff.com on port 80 failed.
Comparable WinInet error code: Error 12029: ERROR_INTERNET_CANNOT_CONNECT.
     at oracle.oats.scripting.modules.http.api.ThinBrowser.createResponseFromHttpJob(ThinBrowser.java:306)
     at oracle.oats.scripting.modules.http.api.ThinBrowser.navigate(ThinBrowser.java:217)
     at oracle.oats.scripting.modules.http.api.ThinBrowser.navigate(ThinBrowser.java:183)
     at oracle.oats.scripting.modules.http.api.HTTPService.navigate(HTTPService.java:635)
     at oracle.oats.scripting.modules.http.api.HTTPService.navigate(HTTPService.java:1823)
     at oracle.oats.scripting.modules.http.api.HTTPService.get(HTTPService.java:2333)
     at oracle.oats.scripting.modules.http.api.HTTPService.get(HTTPService.java:2300)
     at script.run(script.java:37)
     at oracle.oats.scripting.modules.basic.api.IteratingVUser.run(IteratingVUser.java:262)
     at oracle.oats.scripting.modules.basic.api.internal.IteratingAgent.run(IteratingAgent.java:632)
     at java.lang.Thread.run(Thread.java:619)
Caused by: java.net.NoRouteToHostException: No route to host: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
     at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
     at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
     at java.net.Socket.connect(Socket.java:519)
     at oracle.oats.lbrowser.http.RSyncConnection.connect(RSyncConnection.java:480)
     at oracle.oats.lbrowser.http.RSyncConnection.runCurrentJob(RSyncConnection.java:871)
     at oracle.oats.lbrowser.http.RSyncConnection.IRBrowserConnection_doJob(RSyncConnection.java:201)
     at oracle.oats.lbrowser.http.RBrowser.Navigate(RBrowser.java:899)
     at oracle.oats.lbrowser.http.RBrowser.Navigate(RBrowser.java:833)
     at oracle.oats.lbrowser.http.RBrowser.Navigate(RBrowser.java:798)
     at oracle.oats.scripting.modules.http.api.ThinBrowser.navigate(ThinBrowser.java:212)
Edited by: user8692266 on Feb 10, 2010 1:47 AM
Edited by: user8692266 on Feb 10, 2010 1:47 AM

Hi
I'm guessing that you are going trough a proxy, if so you need to set your proxy setting for playback:
View -> OpenScript preferences -> Playback -> HTTP and enter the proxy settings.
Regards
Alex

Error in EMC while attempting to connect to Exchenge server

My Exchange server was working fine until a server restart for a virtual hard disk expansion. After the restart the users can send and receive mails without problems but when I try to open the Exchange Management Console I get the next error when expanding
the Microsoft Exchange On-Premises node:
"The following error occurred while attemting to connect to the specified Exchange server 'server.domain':
The attempt to connect to http://server.domain/PowerShell using "Kerberos" authentication failed: Connecting to remote server failed with the following error message: WinRM cannot process the request. The following error occurred while using Kerberos
authentication: An unknown security error occurred."
I have recently aquired the administration of this server and unfortunately the previous admin didn't left any documentation about the installation and configuration.
Any help with this issue will be greatly appreciated.

Take a look at this
http://support.microsoft.com/default.aspx?scid=kb;EN-US;970923
Its for SCVMM but should work for Exchange 2010 too
Blog: http://theinfraguys.com
Follow me at Facebook
The Infra Guys Facebook Page
Please remember to click Mark as Answer on the answer if it helps you in anyway

Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. This failure occured while attempting to connect to the Principle server.

We are using SQL Server 2012.
Every now and then, when we execute the below stored procedure INSERT_INTO_MYTBL, we got the below error, and it returned @ID = 0.
"Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
This failure occured while attempting to connect to the Principle server."
What causes this error, and how can we fix it ?
Thank you.
create procedure INSERT_INTO_MYTBL
@ID int output,
@Order varchar(50) = NULL,
@ACCOUNT varchar(20) = NULL
AS
DECLARE @Success int, @TryNr int, @ErrMsg varchar(500), @ErrNumber int, @expected_id int;
SET @Success = 0;
SET @TryNr = 1;
SET @ErrMsg = ''
WHILE @Success = 0 AND @TryNr <= 3 and @ErrMsg = ''
BEGIN;
BEGIN TRY;
BEGIN TRANSACTION;
retry:
BEGIN TRY;
SELECT @expected_id = ident_current('myTbl') + 1
SELECT @order = @account + '-' + CAST(@expected_id AS varchar(50))
insert into myTbl
([Order],ACCOUNT)
values
(@Order,@ACCOUNT)
END TRY
BEGIN CATCH;
SELECT @ErrNumber = ERROR_NUMBER()
IF @ErrNumber = 2627
BEGIN;
GOTO retry
END;
ELSE
BEGIN;
SET @ErrMsg = '1.' + ERROR_MESSAGE() + ' ' + @order
RAISERROR (@ErrMsg, 16, 1);
END;
END CATCH
select @ID = SCOPE_IDENTITY()
IF @id <> @expected_id
BEGIN
UPDATE myTbl
SET [Order] = @ACCOUNT + '-' + CAST(@ID AS varchar(50))
WHERE ID = @ID
END
SET @Success = 1
COMMIT TRANSACTION;
END TRY
BEGIN CATCH;
ROLLBACK TRANSACTION;
SELECT @ErrNumber = ERROR_NUMBER()
IF @ErrNumber = 1205
BEGIN;
SET @TryNr = @TryNr + 1;
IF @TryNr > 3
RAISERROR ('Giving up after 3 consecutive deadlocks for %s', 16, 1,@ACCOUNT);
END;
ELSE
BEGIN;
SET @ErrMsg = '2.' + ERROR_MESSAGE() + ' ' + @order
RAISERROR (@ErrMsg, 16, 1);
END;
END CATCH;
END;

When the problem occurs, the stored procedure returns @ID = 0, which I think means the query
When the problem occurs, the procedure does not return anything. SQL Server was told to stop executing. Furthermore, unless you issue the command SET XACT_ABORT ON, SQL Server will not roll back any open transaction. Which is one more reason you should not
permit command timeouts.
As for why this procedure sometimes take a long time, I would primarily suspect locking. When this occurs (but before the timeout elapses!), you could use my beta_lockinfo to see if there is any blocking going on. You find it here:
http://www.sommarskog.se/sqlutil/beta_lockinfo.html
Erland Sommarskog, SQL Server MVP, [email protected]

WMIProviderException: An error occurred when attempting to connect to the report server remote procedure call (RPC) end point

I am getting the following error message while trying to configure a database for a Reporting Service Server. Both SQL Server and Reporting server are 2012 named instances. I have 2014 instances as well on the same server.
Exception details...
Microsoft.ReportingServices.WmiProvider.WMIProviderException: An error occurred when attempting to connect to the report server remote procedure call (RPC) end point. Verify that the Report Server Windows service is running, and then retry the operation.
---> System.Runtime.InteropServices.COMException (0x800706B3): The RPC server is not listening. (Exception from HRESULT: 0x800706B3)
   --- End of inner exception stack trace ---
   at Microsoft.ReportingServices.WmiProvider.RSWmiAdmin.ThrowOnError(ManagementBaseObject mo)
   at Microsoft.ReportingServices.WmiProvider.RSWmiAdmin.GenerateDatabaseScript(String databaseName, Int32 lcid, Boolean isSharePointIntegrated, String& script)
   at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.GenerateDatabaseScript(String databaseName, Int32 lcid, Boolean isSharePointIntegrated, String& script)
Can someone help me on this please?

Hi Jaigi,
According to your description, you want to change a report server database for Reporting Services. But it fails on the last step and returns a error. Right?
In this scenario, it seems you are creating a report server database on another server via remote connection. Based on the error message, it has issues on executing the script for generating new database. Please check if you have permission to connect the
server and create a new database. Also please check if the Reporting Services Windows services is working properly.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

BPC Excel: The system cannot connect to the server. There might be network

Hi Guys,
I get the following error when i try to connect to BPC Excel: The system cannot connect to the server. There might be network or security issue.
This only happen on clients machines, I have installed the client tools on the server and tested, i can connect to Excel but not on the machine. My MS office version is the same as the one on the server. BPC is ver 5.04
Has anyone experienced the same problem.
your help will be greatly appreciated.

Let me summarize your issue to see if I may help. If I cannot, then you will need to work with SAP Support on the connection problem.
- You have a single or multi-server setup?
- Installed using BPC 5.1 SP3, (or 5.0.502) correct?
- You can enter the BPC on the server, both via BPC Excel and BPC Admin?
- When you initiate BPC Admin on your client, so can connect to the Server and perform Admin operations?
- When you initiate BPC for Excel, and walk through the connection wizard, you cannot connect to the server?
- When you are in the Connection Wizard, are you using a path or a Server designation?
- Is the system on a single domain?
- When you added users to the Admin Security profile, they were selected from a DOMAIN?
- You have processed security and assigned ALL TASKS currently and processed the MEMBER ACCESS profiles, yes?
After all of this, have you uninstalled 1 BPC client, cleared the ProgramFiles/BPC folder, and deleted the local stored BPC information? If you haven't, just for simplification, I would attempt this process.
You also hae read all the SAP Support Notes regarding using Excel2007 with BPC and the issues you may experience?
Please let me know and maybe we can help.

There was an error when attempting to connect to the Windows Live Calendar service.

I keep getting a message when I want to check my email you are not connected (but I am,as I can get in my Webbrowser) and the following error message
There was an error when attempting to connect to the Windows Live Calendar service. If the error persists, check to see if there's an upgrade of Windows Live Mail available or contact a service representative.
Can anyone help me, no sense sending me an email, I cannot get into my email.
Lucienne1

Hi,
Try installing Windows 2012 Live Essentials here.
You will have to set up your Pop 3 or IMAP email account after installing the updated version per above.
Are you using an Internet Service Provider Email account or a cloud based (IMAP) Email account?
Pop 3 accounts will require incoming and outgoing server addresses and any additional security settings required by your ISP. If you don't have the required settings for Pop 3 you will have to contact your ISP for those.
Jaco
****I am not an HP employee****
Errare humanum est.

Can't save BISM file pointing to excel sheet (data source). ErrMsg: "There were errors found while validating the page: Cannot connect to the server or database."

Hi,
Me and a collegue is administrering our new enterprise BI portal in SharePoint 2013 (On Premise) and have a problem with using a specific Excel file including general ledger data as data source through a BISM file.
This particular BISM file can't be saved without getting the error message "There were errors found while validating the page: Cannot connect to the server or database."
BISM files against other Excel sheets and sources (for example SSAS tabular databases) works well.
Can anyone help us pinpointing whats wrong here, this is a really important stakeholder in our organization requesting this reporting?
Cheers!

Hi E.SWARD ,
My self created a Power pivot excel then i want to use this excel to create BI file . Still i am getting the same error . Pls help me to resolve this issue
Cannot connect to the server or database.
I am getting the similar error , if i use Tabular analysis server instance .
Subhash

" the volume for (file name) cannot be found. Insert the disk or connect to the server volume and wait for it to appear on the desktop, then try again."

I get an error message in iPhoto when I click on thumbnails of pictures in certain albums. It reads 'the volume for "(file name)" cannot be found. Insert the disk or connect to the server volume and wait for it to appear on the desktop, then try again.' What does this mean and how do I fix it?

It means that you imported the files in Referenced mode and have now remvoed them from the Mac. Put the disk or card back.
For more on iPhoto and file management see this User Tip:
https://discussions.apple.com/docs/DOC-6361

How can I get past the "trying to connect to the server..." part when trying to download the adobe creative cloud desktop app?

When trying to install Adobe Create Cloud desktop app, the adobe installer box comes up and it will not load past the "trying to connect to the server..." part. Why is this and what steps do I need to take to resolve this issue?

A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

I have a new lion server and 4 lion laptops. The laptops loose connection to the shared documents and printers from the server after roughly 1 hour. By disconnecting and re-connecting wireless the connection is regained to shares and printers

I have a new lion server and 4 lion laptops. The laptops loose connection to the shared documents and printers from the server after roughly 1 hour. By disconnecting and re-connecting wireless the connection is regained to shares and printers. We can still surf the web when it goes down.

Ok 1st one. The warning restriction message relates to this line in main.cf:
smtpd_helo_restrictions = permit_sasl_authenticated permit_mynetworks check_helo_access hash:/etc/postfix/helo_access reject_non_fqdn_hostname reject_invalid_hostname permit reject_invalid_helo_hostname
The last reject occurs after the single word "permit" and is ignored.
However, that's not the problem.
I'm not exactly sure what's happening, but this might be a clue.
It would appear that either postfix is not being able to create the socket for private/policy or it's somehow created with the wrong permissions. You might need to ramp up the debug level to get a better idea.
You could check if it's being created by "netstat -a | grep private/policy" in terminal.
My guess is that it's not being created because there is no setup statement in your master.cf file, but I don't understand why postfix would be looking for it if it isn't set up. Private/policy I think relates to grey listing. Maybe gives you a hint.

Do you want to allow changes from firefox software updater every time I attempt to connect to the internet

Every time I attempt to connect to the internet I get a dialogue box that asks do you want to allow this programme to make changes? The publisher is Mozilla, and it also tells me that it relates to Firefox software updater. Never had this until about two hours ago! Also seemed to relate to a crash of McAffee, which happened at around the same time.. Don't know much about computers, but what I do know is that this has only just started... Help...???
== This happened ==
Every time Firefox opened
== About two hours ago.

I have the same problem is it spyware?

HT1527 when attempting to connect to the itunes store, the status message says "accessing itunes store..." but never connects. how do i resolve this?

when attempting to connect to the itunes store, the status message says "accessing itunes store..." but never connects. how do i resolve this?

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

The attempt to connect to the server (IP address) on port 443 failed - OLT

Similar Messages

Maybe you are looking for