Connection to the Debugger or Profiler could not be established

I think I have a Flex/Flash Builder beta config issue? Would be very grateful for any advice.
This might be a good clue to source of my problem:  If I run Flash CS4 Professional and "Begin Remote Debug Session" the flash player will connect to the CS4 debugger - and this is running the same project file in either IE8 or Firefox 3. But it will not connect with the Flex debugger.
I'm in Windows XP and just trying to learn Flex with the "learn in a week" exercises but spent about a fuggin day trying to fix the debugger issue. I've done everything that the forums advise: checked localhost is 127.0.0.1, checked the mm.cfg, reinstalled everything browsers, flash debug versions.. but still can't get the damn debugger in Flex or now Flash Builder beta to work.
Somebody please help!
Robert

In the case of Flash Professional, a connection is established between the Flash Player Debug version and the Flash Professional Debugger while running the swf (whether local or published on a web server). You right click on the Flash area in the browser and select remote debug.
In the case of Flex, a connection is established between the local swf that has just been built in debug mode (in bin-debug) and the Flex Builder Debugger (or Profiler).
If you want to run the Flex Debugger or the Flex Profiler, launch the application from Flex Builder in Debug mode or in Profiler mode respectively. Do not try to publish your swf on a web server, right click and select remote debug as you do in Flash Professional. It won't work.
I have also found I coult only make the Profiler work in IE, not in Firefox.

Similar Messages

  • HT4623 itunes could not sync infomation to the iphone because aconnection could not be established to the phone

    itunes could not sync infomation to the iphone because aconnection could not be established to the phone

    [Reposting from another, similar thread which I started]
    Hey.  I "fixed" the issue for myself, although this fix might not be available to you.  I have a home laptop and a work desktop both running W7. I was syncing contacts with my work computer because that's where most of my contacts originate, but it isn't essential that I do so.  I exported my contact database from my work Outlook to a .pst file, dropped it in Dropbox, came home and loaded the updated contacts, and then synced the phone.  It worked fine and I suppose that's how I'll have to do it from now on.
    I've had random problems since our company "upgraded" to a Windows Exchange server with user data getting corrupted.  After the server pushes updates to our desktops, I've had things like Firefox settings disappearing and such.  I assume this was similar and iTunes couldn't find my contact database, or it was corrupted in such a way that it still works fine in Outlook but can't sync.  Anyway, I don't have the time or patience to solve this on the work box and I don't know if I ever could.  My eventual fix (probably coming soon) will be to buy a 4S  
    Good luck with your phone.  Have you tried a restore?

  • Can somebody help me in finding a solution or an explanation to the problem I am currently experiencing as well as others wherein we cannot connect to the iTunes store (iTunes could not connect to the store. An unknown error occurred (0x80096004))?

    Can somebody help me in finding a solution or an explanation to the problem I am currently experiencing as well as others wherein we cannot connect to the iTunes store. An error message appears and either says "iTunes could not connect to the store. An unknown error occurred (0x80096004). Make sure your network connection is active and try again" or "iTunes could not connect to the store.Make sure your network connection is active and try again." Despite the fact that my network connection is working quite fine, this problem still persists. I can say that my connection is fine because I can surf the internet and furthermore, I used to connect to the iTunes store just before this incident happened which started from April 17, 2014 and persists until today. I tried to solve the problem by following the troubleshoot procedures given in the support section of this site but it really did not solve the problem. I believe that others are experiencing this situation as well very similar to mine when it comes to the time of occurrence as I have read in the discussions in this site. Even though we have different network connections, operating systems and other specifications, we still experience the same problem, so is there really a problem with our computers or is it with the iTunes? And by the way, my computer works under Windows XP. Thanks a lot. God bless.

    Try this...
    Triple click anywhere in the line below to select it and press Ctrl+C to copy it.
    cmd /k netsh winsock reset
    Press the WinLogoKey+R to open the run dialog, then Ctrl+V to paste, then press enter/return.
    You should get something similar to this:
    Reboot the computer and the problem should be resolved.
    If it doesn't work then perhaps a full tear down and rebuild of iTunes will fix things. See Troubleshooting issues with iTunes for Windows updates for details.
    tt2

  • Error Message: The data provider required to connect to the local data file could not be found. The file will be added to the project but the typed DataSet associated with the file will ont be generated.

    I am currently taking the course "C# Fundamentals" from Bob Tabors site:  LearnVisualStudio.NET .  I'm on day 8 where we are integrating SQL Server with C#.  In Lesson 6 and 7, (havent' gotten past these two) I am having an
    issue.  In Lesson 6, "Retrieving Data with ADONET 2 in a Connected Scenario (SQL Server Compact Edition) when I go to create the data file I get the error message I typed into the title.  I cannot get the db to appear in the Solution
    Explorer, or open up so I can create a table.  When I try to skip by that lesson, and complete lesson7, I'm running into the same basic problem, where the error messages are different but I get an exception when I attempt to run the program.  Even
    though I have been able to create the table for this lesson, the Exception states I have an invalid object name 'Customers' which is the name of the table. I have tried reading several different suggestions for correcting this issue, but have not understood
    exactly what I need to do.  Since I work from home on my computer, I do not want to do anything with files or downloads unless I understand what I need to do, cause I do not want to lose my job.  Any help would be appreciated. 
    JennyBarrett7

    Hi
    According to your error message, we need to verify if Microsoft SQL Server Compact appears in the
    Change Data Source dialog. If not, you need to install
    SQL Server Compact components for Visual Studio firstly, and if you choose to install SQL Server Compact 4.0 , you should note that SQL Server Compact 4.0 supports in Visual Studio 2010 Service Pack 1 or later versions. I recommend you to install the latest
    Service Pack (SP) of SQL Server Compact, and latest SP of Visual Studio, then check if the error still occurs. For more information, see:
    http://blogs.msdn.com/b/sqlservercompact/archive/2011/03/15/sql-server-compact-4-0-tooling-support-in-visual-studio-2010-sp1-and-visual-web-developer-express-2010-sp1.aspx
    However if there is no problem with the installation of SQL Server Compact, it will be an issue that regards ASP.NET and website deployment. I suggest you to post the question in the ASP.NET forums at
    http://forums.asp.net/ . It is appropriate and more experts will assist you.
    In addition, you can review the following link:
    Working with SQL Server Compact in Visual Studio:http://msdn.microsoft.com/en-us/library/gg606540(v=vs.100).aspx
    Thanks
    Lydia Zhang

  • A connection with Quick Time software server could not be established

    How do i fix this when trying to update the software?

    Let's try installing using an installer from the website rather than using Apple Software Update:
    http://support.apple.com/kb/DL837
    Any better luck with that one? Or the same message?

  • The profile could not be added to the device.

    Hi,
    I have deployed multiple ipads in my company.
    I have uploaded a profile with the iphone configuration utility on two ipads with no problem.
    The third ipad returns this error message "The profile could not be added to the device."
    I have tried resetting the ipad with no success.
    I have seen an archived discussion that said :
    "I had the same issue (and have already bugged it). I was able to restore function by deleting ~/Library/Caches and com.apple.iPhoneConfigurationUtility.plist. I also deleted the files in ~/Library/MobileDevice/Devices, which correspond to the iPhones I had connected to the iPCU...
    Obviously, make sure iPCU is quit before following the above steps. Good Luck!"
    I have tried locating the file but it doesn't exist.
    Anyone out there knows how to fix this ?
    Thanks !

    I had the same issue (and have already bugged it). I was able to restore function by deleting ~/Library/Caches and com.apple.iPhoneConfigurationUtility.plist. I also deleted the files in ~/Library/MobileDevice/Devices, which correspond to the iPhones I had connected to the iPCU...
    Obviously, make sure iPCU is quit before following the above steps. Good Luck!

  • TS2830 Sync for IPod Touch quit working and I get error messages "a session could not be started" and "a connection could not be established" although the IPod appears in ITunes.

    This is a new problem for an IPod Touch  I have had for a year.  The IPod is hooked up by cable and appears in ITunes. I can examine all the content on the IPOD  and I can click "sync".  It goes through to Step 7 and then the error messages occur.  First "a session could not be started with the IPod" and when that dialogue box is closed, the message "a connection could not be established to the IPod." 

    Maybe:
    Sync Session Failed to Start iTouch iOS5: Apple Support Communities
    iphone could not be synced sync session failed to start...: Apple Support Communities

  • Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

    Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

    Hello Sue,
    I have an iPad 3, iPad Mini and iPhone 5S and they are all sluggish on capitalisation using shift keys. I hope that Apple will solve the problem because it is driving me crazy.
    I find using a Microsoft Surface and Windows 8 phone, which I also have, work as well as all the ios devices before the ios 7 upgrade.
    It has something to do with the length of time that you need to hold the shift key down. The shift key needs to be held longer than the letter key for the capitalisation to work. For some reason, this is a major change in the way we have learnt to touch type on computers. I am having to relearn how to type!
    Michael

  • I get the following message, when trying to check for updates on itunes:-  "The iTunes update server could not be contacted. Please check your internet connection or try again later".

    I get the following message when I go to "check for updates" on iTunes (I have XP on windows). Error message: "The iTunes update server could not be contacted. Please check your internet connection or try again later".
    My firewall (both anti virus firewall and windows firewall, are set up to allow itunes programme to work) - I also have set both internet explorer and chrome to allow
    apple website as an exception.
    However, I still get the same error message... can anyone help?
    Thanks

    Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
    http://www.apple.com/itunes/download/

  • Safari will not open on my iPad Air...."Safari cannot open the page because it could not connect to the server." There were recent updates on my iPad Air. How can I fix this problem?

    How can I correct the issue of Safari not connecting on my iPad Air? It was working great 2 days ago.....now on September 20 it is not working! I have an internet connection but Safari will not open. "Safari cannot open the page because it could not connect to the server."

    Hello Beckieor,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning network issues:
    iOS: Troubleshooting Wi-Fi networks and connections
    Follow these steps to troubleshoot the above issues:
    Be sure you're in range of your Wi-Fi router (access point).
    Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
    Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
    Tap and Forget this Network.
    Try to connect to your desired Wi-Fi network.
    Note: You may need to enter your Wi-Fi password again if your network requires one.
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • TS3297 My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings"  I am on a secure networ

    My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings"  I am on a secure networkl.

    Can't connect to the iTunes Store
    Make sure that time zone is correct in addition to date and time

  • I keep getting "the network connection could not be established" error message when trying to update my iPads and iPhone to iOS 5.1

    I keep getting "the network connection could not be established" message when trying to update my iPad, iPad2 and iPhone4 devices using either my iMac or MacBook.  The Macs and iOS devices are apparently working correctly otherwise.  Problem started about a day ago when I connected one of the iPads to my iMac and iTunes notified my of an update for the device.  I tried and got the above message.  Tryied other iPad2 and iPhone4 and get the same message.  Also, get same message when trying to update using the MacBook. My system SW is 10.7.3 on the iMac and 10.6.8 on MacBook.  iTunes is version 10.6. Have gone thru the check list of things to check and have re-started. Would appreciate any ideas. Thanks.

    Another user named Springbk posted a fix that worked for me as I was having the same problem today:
    I Changed my DNS settings to OpenDNS
    On a Mac go to SYSTEM PREFERENCES>NETWORK>ADVACED>DNS
    change DNS by adding ( + )
    208.67.222.222
    then
    208.67.220.220
    click okay/apply after. then try the update. after the update, just delete the two open DNS server numbers. should revert back to your old one.

  • While playing tv shows offline, an error message pops up. "we could not complete your itunes store request. the network connection could not be established. there was an error in the itunes store. please try again". It interrupts the viewing

    I'm running Leopard and whatever the latest iTunes is. Any help appreciated.

    I've got an Apple ID problem, too. All of the sudden in the midnight between August 31st and September 1st, the new apps I picked up on the App Store hung forever 'Waiting..' in my iPhone and never turned 'Loading'. When a substantial amont of time had passed, they reported, they 'could not connect to the App Store' and .. disappeared! Well what they told was not perfectly true because I could however connect to the store as I could browse and pick the apps, but the apps just didn't load. I tried to log into my account in iTunes on my Windows 7 laptop, too, and there got exactly the message in the topic title.
    It appeared later my Apple ID did not completely fail because when I switched from my home WiFi to the phone 3G, everything worked just as nothing happened. Logically, this intimated my WiFi had flaws. Or, some place between my WiFi router and Apple servers did, to be precise. My router was not to blame because I did no changes to it whatsoever.
    All right, it is Saturday today and my ISP is running in unmanned mode meaning no hotline, but I call them on Monday unless the problem disappears by itself. I just wonder what I say, because from non-i-world point of view everything works well, and I know for sure guys in the ISP support don't own any i-stuff, (because they are all android fanatics) . I'm not telling them my Apple ID to let them reproduce the problem on their home equipment, which means I come almost totally proofless.

  • I keep getting the follow error messages when I try to sign into iTunes store or redeem a song code: We could not complete your iTunes store request. The network connection could not be established. There was an error in the iTunes store, please try again

    I keep getting the following error messages on my Mac when I try to redeem a song code: "We could not complete your iTunes store request. The network connection could not be established. There was an error in the iTunes store, please try again later."  and then, "We could not complete your iTunes Store request. An unknown error occurred (-50)."

    Hello, constance132. 
    Thank you for visiting Apple Support Communities. 
    Here are some troubleshooting steps that I could recommend when receiving error -50. 
    "Error -50," "-5000," "8003," "8008," or "-42023"
    These alerts occur due to timeouts or conflicts trying to write a file during download.
    If you encounter this issue while accessing iTunes Store:
    See iTunes 9: "One Moment Please" or "Error (-50)" message when accessing iTunes Store
    If you encounter this issue while while downloading something from the iTunes Store:
    Delete your iTunes Downloads folder, located in:
    Mac OS X:
  ~/Music/iTunes/iTunes Media/Downloads   Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory.
    Windows Vista:
  \Users\username\Music\iTunes\iTunes Media\Downloads\
    Windows 7:
  \Users\username\My Music\iTunes\iTunes Media\Downloads\
    Windows XP:
  \Documents and Settings\username\My Documents\My Music\iTunes\iTunes Media\Downloads\
    After locating your iTunes Downloads folder:
    Quit iTunes.
    Delete the Downloads folder on your computer.
    Open iTunes.
    Choose Store > Check for Available Downloads.
    Enter your account name and password.
    If you encounter this issue while while downloading Digital Copies using Windows:
    Use MSCONFIG (directions for Windows XP and Windows Vista/Windows 7) to disable conflicting software.
    If using MSCONFIG steps resolves the issue, you may want to use the System Configuration Utility to turn on the third-party System Services and Startup Items one at a time (restarting your computer after turning on the item or items) to identify which System Service or Startup Item is causing the conflict.
    You can turn all of them back on by selecting the Normal Startup option under the General tab of the System Configuration Utility window, but please note that this may cause the issue to reoccur.
    If you are able to isolate the issue to a particular third-party software, you may wish to contact them to let them know of the conflict.
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Cheers,
    Jason H. 

  • "We could not complete your itunes store request. The network connection could not be established. There was an error in the itunes store. Please try again later."

    When I try to open the home page in my Itunes I get the message "we could not complete your itunes store request. The network connection is not be established. There was an error in the itunes store. Please try again later." It had been working just fine, in fact I had just purchased a song & edited my itunes account. Could changing the name on my account have cause the error message or is something else going on? This is a brand new computer.

    I've got an Apple ID problem, too. All of the sudden in the midnight between August 31st and September 1st, the new apps I picked up on the App Store hung forever 'Waiting..' in my iPhone and never turned 'Loading'. When a substantial amont of time had passed, they reported, they 'could not connect to the App Store' and .. disappeared! Well what they told was not perfectly true because I could however connect to the store as I could browse and pick the apps, but the apps just didn't load. I tried to log into my account in iTunes on my Windows 7 laptop, too, and there got exactly the message in the topic title.
    It appeared later my Apple ID did not completely fail because when I switched from my home WiFi to the phone 3G, everything worked just as nothing happened. Logically, this intimated my WiFi had flaws. Or, some place between my WiFi router and Apple servers did, to be precise. My router was not to blame because I did no changes to it whatsoever.
    All right, it is Saturday today and my ISP is running in unmanned mode meaning no hotline, but I call them on Monday unless the problem disappears by itself. I just wonder what I say, because from non-i-world point of view everything works well, and I know for sure guys in the ISP support don't own any i-stuff, (because they are all android fanatics) . I'm not telling them my Apple ID to let them reproduce the problem on their home equipment, which means I come almost totally proofless.

Maybe you are looking for

  • I can´t read my external Hard Drive Anymore

    Hi, I just got a new Imac, the slim 27 in. one, I connected an external Hard disk to it and everything fine for the first two / three days. Now It won´t even recognise it, the light on the HD is on but there´s no sign that the computer is reading it.

  • How can I get a really large (30MB) InDesign file to a PDF under 10MB?

    It's a 20-page document including dozens of photos and a few vector graphics which are .pdf or .ai, respectively. All are links, not embedded. I created the document for print, but now need a version to post on a website which has a max size of 10 MB

  • Decent HD camcorder compatible with FCP?

    I really need to get an HD camcorder and the most important thing for me is easy compatibility with Macs and uploading to Final Cut Pro X, which I have. My budget is under $600, so obviously how good the HD quality is is not the priority here. I've l

  • Creating PDFs with links for web searches

    Hi everyone. That title is not exactly the problem I'm having, but it's a good start. We have found that Firefox/IE/Chrome search our PDFs quite nicely, but when the link is clicked in the search results, all that happens is that the PDF opens to pag

  • FTP server in EBI

    Hi all, I need to get a jpg image from a PDA, I never do it. And the folowing message appear: "==>  what is the specific message for which Fieldlink user id that should have the below mentioned JPG attached ? Please note that the JPG are not "in" SAP