Connection to Virtual server stopped working via manager and RDP
Hi
At first, sorry for my English
I have trouble with our Hyper-v server. There are 2 virtual servers running on it. One Domain controller and one Application server. It working fine, but it stopped working for 3rd time (randomly). No event is written in event viewer . If it happen, I can´t
connect via Hyper-v manager or RDP to the virtual machines and the services on virtual servers doesn´t work. It doesn´t write any error message or something while I trying to connect. I tried to restart hyper-v service with no result . It started working when
i restarted whole Hyper-v server.
Can you please help me with this one ?
thx
Hi ,
Please check the VM's state in hyper-v manager when it "stopped" .
What is the host's OS ?
What is the guest OS ?
Did you check hyper-v log ( event viewer --> application and services log -->microsoft --> windows -->then check hyper-v logs to find some useful information )
Also please check event log in VM .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Similar Messages
-
Connection to Windows Server stopped working
I have a very bizarre problem, our office of about 40 PCs with 5 Macs. 4 of those Macs have no problems connecting to a Server 2003 machine using SMB connections. The 5th machine had been working fine up until today. The user cannot connect to the server using his username. When prompted for the username and password if I use my domain username and password, it connects no problems. When he uses his domain account, the Mac returns the following error:
The finder cannot complete the operation because some data in smb://server+/+share could not be read or written. (Error code -36)
We have tried shutting down and restarting with no success. I have cleaned out his keychain of any saved information for that server and the problem still appears. No changes have been made to the server that would limit his access between yesterday and today.
He is running OS X 10.3.9 and is connecting wirelessly, but experiences the same problem on a wired connection. Since the other 4 Macs are not having problems (including another 10.3.9 laptop), I know it doesn't have to do with Server 2003's requirement for Digitally Signed communications.I would guess the user's Windows account is corrupted. Since Error -36 is a read/write error, it could occur if the user's server account record is damaged. Since you can use this Mac to logon to other accounts, the Mac is probably fine. Since other Macs can still logon, the Windows server 2003 is fine. This points toward a corrupted account.
I've experienced this phenomenon with Windows accounts and Windows PCs.
A test would be to logon to this user's account from another machine on the network, either Mac or PC. Failure from another machine would point to corruption of that account on the Windows 2003 server. If corrupt, it will need to be deleted and re-created. Backup any server data for this account, since deleting the account will destroy any server data for this account. -
Lion server on Mac mini server stop responding to ssh and VNC (other services like mail, ical works well)
Version is Lion server 10.7.4
When I attach a monitor to it, I saw all the buttons and menus stopped responding too. I can only push and hold the power button on the box to shutdown.
It only started happening recently.
Anyone has any clue?
Thanks for the help in advance!!!Found that the second hard drive is broken. I have to go to the apple store to have it replaced.
I had to press the power button to turn the server off for several times, then the broken hard drive went disappeared. After that, I had to disable the Spotlight. Then the server went back to work normally.
Now I made a CCC copy of the primary hard drive, and would like to have the server run on the external raid disk (connected through thunderbolt). Does anyone have previous experience with it? Any expectable drawback or issue with this setup? -
Hi there, I am trying to connect to my server at work from home using a vpn connection. It connects fine and the time ticks along, but when i click go - connect to server, it comes up with connection failed. Please help!
... when i click go - connect to server, it comes up with connection failed.
If you're trying to connect to a Bonjour server on the remote network, that won't work over a layer 3 VPN. Use something like Hamachi or one of the SSH-tunnelling Bonjour proxy apps for that. -
Adobe Bridge (CS6) Stopped Working & Application Manager Fails No Matter What
Adobe Bridge (CS6) Stopped Working & Application Manager Fails No Matter What I do.
I have uninsalled, ran the cleaner, installed, and Bridge will not open, Application manager will not run.
It
Win 7 x64 Pro
CS6
ThanksGood luck with that, and don't forget to deactivate CS6.
My system is slowing down after nearly two years, and I am dreading a reinstall - there always seems to be something you have forgotten! What really worries me is what happens to existing raid0 arrays seeing as the mainboard needs drivers. They are backed up, but I just don't trust a single level backup, and will have to add a further 3Tb of drive space to make a straight copy of the raid0 arrays. I also like the idea of Windows 8.1, but dread finding out that the drivers don't work!
The Premiere Pro hardware forum is the perfect place to ask about stuff like that. Harm, Bill, Erik etc. are super clued up on such things, so I shall run my concerns past them before committing.
So I wish you good luck again, and I know you'll make a plan before going ahead with it. -
After the latest ISO 8.3 down load to my, I now keep getting a pop up saying can't gette mail server stopped working, I am still receiving e mail so I know it working, it's just annoying having to cancel this pop up, any ideas how to stop this pop up.
Pull your mail plist from ~/Library/Preferences
-
Since upgrading, both our wireless printers are still visible, but OSX will not connect with them. Both work via connecting from other sources via the same wireless router (airport). What do I need to do to get my printing/scanning working again?
First thing to try is reset Printing System:
OS X Mavericks: Reset the printing system
Next would be reset the router (power off 15 secs then back on). And, 2 minutes later, reset the printers 1 by 1. -
My incoming mail server stopped working for the 3rd time Help?
This is the third time my incoming mail server stopped working any suggestions on how to repair this?
Thank You!If Apple replaced the logic board three times for the same issue, and the third board has now broken for the same reason, you may be able to ask Apple for a replacement machine. You're out of warranty, and Apple is under no obligation to do anything for you (unless the current logic board was replaced by Apple less than 90 days ago in which case it's still under warranty), however, as a good will gesture, they may be willing to exchange your system for another one. You can start at the Apple store or call Apple customer care directly.
-
Flash stopped working. Updated and enabled to no avail. Am using Windows 7 64-bit and IE10.
Flash has stopped working. Updated and enabled to no avail. Am using Windows 7 64-bit and IE10.
Pat Willener wrote:
What exactly means "stopped working"?
It had been working on my computer through the different versions of IE for years. I then noticed a few days ago that numerous reliable sites told me to install Flash. I confirmed that it was installed and enabled but all attempts to reinstall resulted in the same condition; Installed under "Programs" ans enabled under "Manage Add-ons". However I still couldn't get it running and Adobe's "Check Now" site showed it NOT installed or enabled. The only thing I can think of that might have had an effect was that I returned to IE10 recently after having some problems with IE11. -
Unable to connect to report server - on Win 8.1 and SQL Server 2014
unable to connect to report server on Win 8.1 and SQL Server 2014 version
Microsoft SQL Server 2014 - 12.0.2000.8 (Intel X86)
Feb 20 2014 19:20:46
Copyright (c) Microsoft Corporation
Express Edition on Windows NT 6.3 <X64> (Build 9600: ) (WOW64)
ThanksHi,
I suggest you check out the following article for the steps of installing
Database Engine Services and SQL Server Reporting Service.
http://msdn.microsoft.com/en-us/library/ms143711.aspx
Best Regards,
Tracy
Tracy Cai
TechNet Community Support -
my iphone 4s wont connect in apple tv 3rd gen dont show the airplay icon, but apple tv can connect in Bose sound touch 20 via airplay, and the iphone also connect to sound touch 20 via airplay, ive just buy it yesterday in Mediamarkt Spain,, so it means theres something wrong between my iphone and the apple tv? please me
Hi jaredfox06,
If I understand the issue correctly, you have recently purchased a used iPhone and you do not see your Apple TV in the control center in order to AirPlay. To troubleshoot this issue please follow the steps outlined below.
Try these steps first
Make sure that you have the latest software on your iOS device and Apple TV.
Make sure that both devices have Wi-Fi turned on.
On your iOS device, go to Settings > Wi-Fi.
On your Apple TV, go to Settings > General > Network.
If you're trying to use peer-to-peer AirPlay, make sure that both devices have Bluetooth turned on.
On your iOS device, go to Settings > Bluetooth.
On your Apple TV, go to Settings > General > Bluetooth.
If you don't see AirPlay in Control Center
When an AirPlay-enabled device is available, you'll see AirPlay in Control Center on your iOS device.
If you don't, try these steps:
Restart your iOS device and Apple TV.
Connect both devices to the same Wi-Fi network.
On your iOS device, go to Settings > Wi-Fi.
On your Apple TV, go to Settings > General > Network. If your Apple TV is connected using Ethernet, make sure that it’s plugged in to the router you're using for Wi-Fi.
On your Apple TV, make sure that AirPlay is turned on. Go to Settings > AirPlay.
Get help using AirPlay and AirPlay Mirroring on your iPhone, iPad, or iPod touch - Apple Support
Have a good one,
Alex H. -
I have a macbook air and I connect it to an external HDD via thunderbolt and nothing happens....
If a PRAM reset fails to help, an appointment at the Apple store genius bar would be the next option.
http://support.apple.com/kb/ht1379
Ciao. -
My "9-o-l-." keys stop working after startup, and spreading! ahh help?
My "9-O-L-." keys stop working after startup and my arrow keys too.
Sometimes when I start up the keys will work for a bit then one by one stop functioning and then randomly work every so often, then it seems to "spread" to the right shift key, and sometimes the "8-I-K-," keys.
Around the same time when this all began my Battery completely stopped working too, does this have anything to do with it? I've reset my PRAM and no luck.
I'm planning on replacing the keyboard, will that fix the problem? or is it something deeper?
Thanks in advance!
-AndrewI assume you've rebooted? Can you control the computer well enough to make a new account and log into it? Doubt this will fix it but maybe. The keyboard may need replacing but it might also be that the cable has worked loose so that some of the wires have disconnected but not all. Sounds like a trip or call to Apple is in order.
-
how do i set up email on iphone. i keep on getting an error that says, "We couldn`t connect to the server. Check your information and make sure it`s correct." all my info is correct, can someone please assit. it is the app OWA
Is this a company email account? If so you may need to talk their technical support, as there may be additional layers of security which are preventing a connection.
-
i wanted to know how does technical support work via icloud and is there any new technology out that helps providing technical support?
basically I’m doing a project were I wanted to find out if there are recent technology out that provides technical support for example they do it with remote access but is they any new ways that they can support us and just wanted to find out if icloud gives technical support then how?
Maybe you are looking for
-
Hi All, I have a large domain and a long list of websites that are trusted using the following group policy setting: Administrative Templates > Windows Components > Internet Explorer> Internet Control Panel > Security Page > Site to Zone Assignment L
-
Increment decrement visible property
It would appear that (in LV 2012 SP1) the simple numeric control from the Classic palette shows following behaviour when accessing via VI Server: Class Name = "Digital" Increment / Decrement Visible = Error, property not found ?? What ?? It appears t
-
After sync, unable to enter/open app
after sync, unable to enter/open app
-
Have no speaker sound, computer keeps telling there is a media play error. How do I correct this
HP Pavilion g6, no sound coming from my speakers, system telling me it's media player issue. Any suggestions on how to correct this problem.
-
There is any built in mechanism that send trap when cabel disconnected?
I have IPMP on solaris 10, with 2 nics. there is any tool\pkg\ mechanism in solaris that can send snmp trap (to SMU) when cable disconnected or nic is down?