Connection with html portal to r/3 4.6c

HI experts
I am new to SAP.
I have a problem. Can any one help me how to call FM in ESS portal. We use htmls through ITS server to connect to Sap R/3 4.6c.
Can you help me how to pass data from portal screen to r/3.
How to call function module from portal? in ESS, if an employee hits on submit button then we have to call Function module with necessary data passing from html to function module.
what coding do we write for pop up window when some press submit button.
I am in need of it urgently.

Hi Klaus,
sorry that the answer is so late!
You are right, different ports make life much easier, but i solved the problem over the ITS Path:
"/scripts/wgate/../../<instance>"
Now the connect over the ITS to the R/3 System works
Thanks for your help
Best regards,
Mario

Similar Messages

Bug in wifi/wireless connection with captive portal in UK/London ?

With my macbook pro (10.6.4) & iphone (iOS 4), I do not manage to have an easy connect on free wifi captive portals in London. They all are new connections (unknown networks before).
* dhcpd lease seems to be instable. I can get wifi connection (with good wifi signal strength) but most of the time get a "non-allocated" lease like 169.254.57.x/24 without any router/dns. A few rare times, the dhcp server give a me a complete ip connection.
* in the rare case where IP connection could established, I was not redirected to the captive portal. I had to manually enter its address (in my case <IP>:8000, you need to guess) and even after authentication, I can't browse the Internet. In one of my test, I managed to resolve dns entry but can't browse the web.
I tried during an hour and I couldn't make it on work on my Macbook. work a small time with the iPhone.
tested in McDo free wifi and Airbox Public Wifi of EasyHotel (Airbox system). also have problem with "Wifi Zone - The Cloud".
ok in Starbucks and in St Pancras Free Wifi.
Found these threads which could be related but no real solutions:
http://discussions.apple.com/thread.jspa?messageID=11875166&#11875166
This is probably the router's fault but I can't check this.

Hmm...pretty interesting. What redirection mode did you use for m0n0wall? (http or dns) Have you tried disabling the NAT on the router as well as unchecking the block anonymous internet requests on the security tab?
I have a similar setup on a T1----media converter----WRT54G setup. Basically, the router was able to get public wan ip addresses on the status page. So do the computers behind it (wired and wireless) but they aren't online. We pinged the three dns numbers on the router, only 1 replied. Now, the ISP has Cisco all-access installed on the converter (quite similar to captive portal) and it shows up on every computer when we try to go online. We open up the browser, it prompts for the authentication. We fill-in the details but still it doesn't go online. Bottom line was we cloned the mac of the main computer and they didn't need to authenticate...but then again it defeats the purpose of the software.
Also, the router was set as a DHCP server with NAT enabled. I'm thinking that the router's firewall still blocks your computers even when it's already set as a switch. Try to disable the NAT and see if it works.

ADFS connected with 2 different domains

I have a ADFS server on-premises. The ADFS server is connected with my SharePoint portal hosted on hostway sharepoint hosting provider. Currently using domain "xyz" for Germany.
Now i want another domain "mno" in France to connect with SharePoint portal hosted on hostway. Do i have to buy another ADFS server or can use the same ADFS I have on-premises?
Is it possible to put a domain controller and manage authentication of both domains xyz, mno but using 1 ADFS server?
Thanks.
------------------------------------ Happy Workaround :) Vivek http://www.linkedin.com/pub/vivek-mishra/11/456/a54

Hello,
please see
http://social.technet.microsoft.com/Forums/windowsserver/en-US/195399e6-b5dd-46cf-a351-228bd62b24d8/adfs-specific-question-post-on-the-adfs-forum?forum=winserverDS about AD FS forum.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Open and close RFC connection with portals...

Hi Experts,
I created a RFC having a query which is taking a long time to execute. So i want to close RFC connection with portals which is via java connector(JCO) before that query and open the connction again after that query.
Please advice is it possible to achieve this. If yes, then how.
Regards,
Guddan

Hi Guddan,
I created a RFC having a query which is taking a long time to execute. So i want to close RFC connection with portals which is via java connector(JCO) before that query and open the connction again after that query.
I guess i will need to understand your requirement a little more in detail, as i understand you have an RFC which has a query within to fetch some data and is taking a long time to do so. In the meantime you don't want to keep the connection open?
My question would be, Is the role of this RFC to only execute the query and fetch the data or does it do something else?
If it does other things and these are independent of the query execution, then you can span a parallel call within the RFC to execute the query and in the meantime the RFC does the other things (or vice versa) hence reducing the overall time taken.
If the sole purpose of this RFC is to execute the query, then you will not be able(i mean to say there is no simple and direct way of doing this) to close the connection after the Query is started and re-establish the connection after its execution, for a simple reason that - how will you know if the query has completed it's execution, so that you can establish the connection back.
Alternate solutions, make this a two way asynchronous call, 1) You invoke the RFC asynchronously and close the connection, the RFC in turn will execute the query and transfer the data to JCO via another RFC call.
If this needs to be a synchronous call, then you will need to optimize the query to its best.
Regards,
Chen

E Recruitment Standalone system needs to connected with portal

Dear E rec experts
I am having e rec standalone system and a SAP HR system , Presently portal is connected with SAP HR system, I need to connect the portal to E rec server as well . Our Basis team did the SLD and SSO configuration , and portal system object also have been created to point the portal with Stand alone system . still i can not connect to e rec system with the portal.
Can any help with the java connector component name for e rec stand alone system with HR system , if jico is the solution for this issue.Else Please advice me any other solution -
Regards
Abhi

Hi Abhi,
Jco is for Java components. E-recruiting does not use Java Web Dynpro, but rather BSP and ABAP WD.
You link the systems via RFCs:
Call SM30, table T77S0 and check following parameter:
in RECFA HRRFC the destination to the HR system should be maintained
for this destination you can check if the connection is working by going to transaction SM59 -> ABAP connection -> double-click on the name -> button "connection test" to confirm the connectivity.
Afterward, you have to create the ALE distribution model so that you can transfer data via PFAL tcode and check the received Idocs on T-code BD87.
Regards,
Bentow

Sharing Portal database connection with JSP page

Hi out there,
I implemented a JSP page as a selection form to be integrated into Oracle Portal. This JSP page contains a 'dynamic' form which needs to send queries to the database also integrated in the Portal.
For this I am currently using a JDBC connection but I would prefer to use the internal db connection of the Portal System.
Explanation: The user has to log in to the Portal and after that can call the JSP form. To poulate some comboboxes within this form I need some data from the database and the user does have READING privileges on that database.
Can anybody tell me how to use the user's login and password (or the established connection) to fetch the needed data from the database OTHER than with a jdbc connection?
Thanx in advance!
Cheers,
Thomas

sorry. not going to happen. you're running in a completely different environment when running Java on Portal. Portal is running in the database; your Java is running on the application server. your Java code must use JDBC to access any database resources, even if Portal related.
it is essential that you implement a connection pool on the application server to optimize your database traffic. check out bitmechanic for a very good open source option.
good luck,
rich

Reporting Services not able to connect with sharepoint

HI
We have a Sql server instance where we are not able to install reporting services, so what we have done is we have created one more sql server instance on the same server with reporting services.
When we configured reporting services in sharepoint integrated mode and try to connect that web service url in sharepoint we are getting an error in sharepoint central administartion that not able to connect to the reporting services.
Request you to throw some light on the same.
Thanks
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

Hi Geeth,
Based on the limited information, I am not very clearly about you issue. In order to solve the problem more efficiently, I need to clarify some information. Could you post more detail information about “try to connect that web service url in sharepoint we
are getting an error in sharepoint central administartion”? For example, the detail steps about the action, the screenshot of the action, and what error message you received. I’m not sure which step are you trying to do. And could you tell me the edition of
your SQL Server and SharePoint? It is benefit for us to do further analysis.
References:
2008 R2:
http://technet.microsoft.com/en-us/library/bb283190(v=sql.105).aspx
http://sharepointtaskmaster.blogspot.in/2010/11/intergration-reporting-service-with.html
http://technet.microsoft.com/en-us/library/bb326213(v=sql.105).aspx
2012:
http://technet.microsoft.com/en-us/library/47efa72e-1735-4387-8485-f8994fb08c8c
http://denglishbi.wordpress.com/2011/07/22/configuring-sql-server-denali-reporting-services-sharepoint-2010-integration/
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Error while Test Connection with Connector

hi all:
     there is an error while Test Connection with Connector , I also test it through sys administration->sys configuration->
suport -> sap transaction, I got all errors, I put these two errors as folows, could you please tell me how to sovle it
***************ERROR 1 while *error while Test Connection with Connector ******************************************************
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this
system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
************error sys administration->sys configuration-> suport -> sap transaction        ********************** 1.5 #0025B3E02892006100000A0800001798000487530FB0122E#1274690722265#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt
.runtime#guodongdong#47472##n/a##690347f0670e11df98cc0025b3e02892#SAPEngine_Application_Thread[impl:3]
9##0#0#Error##Java###04:4524/05/10_0077_6087550
[EXCEPTION]
#1#com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Application URL
&\#39;:///sap(ZT1KVXBWektldldTeV9QQXBXRjNaWTRBLS1OZmRvZzBRWWY2QmN0WThNUmgqdUlRLS0=)/bc/gui/sap/its/webgui&\#39; is not valid!
Please check the protocol and host entries for system &\#39;sapdev&\#39;.
     at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass
(AbstractIntegratorComponent.java:123)
     at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
     at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:523)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:412)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process
(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

Hi,
As per this part of the trace:
Exception in SAP Application Integrator occured: Application URL &\#39;:///sap(ZT1KVXBWektldldTeV9QQXBXRjNaWTRBLS1OZmRvZzBRWWY2QmN0WThNUmgqdUlRLS0=)/bc/gui/sap/its/webgui&\#39; is not valid! Please check the protocol and host entries for system &\#39;sapdev&\#39;. at ...
You can clearly see that the system object 'sapdev' is not configured correctly/at all - you are trying to launch transaction iView
(WEBGUI) and in order to do so you should configure the 'internet transaction server' category of the system object
with the hostname of the ITS server.
Generally the template is
<System.Access.ITS.protocol>://<System.Access.ITS.hostname>/sap<ESID>/bc/gui/sap/its/webgui?\....
So that's why you got
Please check the protocol and host entries for system ..

Replacing non-ASCII characters with HTML charcter references

Hi All,
In Oracle 10g or greater is there a built-in function that will convert a string with non-ASCII characters like this
a b č 뮼
into an ASCII string with HTML character references like this?
a b & # x 0 1 0 D ; & # x B B B C ;
(note I had to include spaces between each character in the sample code for message to prevent the forum software from converting my text)
I tried using
utl_i18n.escape_reference( val, 'us7ascii' )
but for some reason it returns
a b c & # x B B B C ;
Note how it converted the Western European character "č" to its unaccented counterpart "c", not "& # x 0 1 0 D ;" (is this a bug?).
I also tried a custom solution using regexp_replace and asciistr (which I can't include here because the forum software chokes on it) but it only returns the correct result for values <=4000 characters long. Unfortunately asciistr doesn't appear to accept CLOB values larger than 4000 characters. It returns an error message like
(ORA-22835: Buffer too small for CLOB to CHAR or BLOB to RAW conversion (actual: 30251, maximum: 4000) ).
I'm looking for a solution that works on CLOB data of any size.
Thanks in advance for any insight you can provide.
Joe Fuda

So with that (UTF8) in mind, let's take another look.....
As shown below, I used a AL32UTF8 database.
Note: I did not use a unicode capable tool for querying. So I set console mode code page to 1250 just to have č displayed properly (instead of posing as an è).
Also, as a result of using windows-1250 for client character set, in the val column and in the second select's ncr column (iso8859-1), è (00e8) has been replaced with e through character set conversion going from server back to client.
Running the same code on a database with a db character set such as we8mswin1252, that doesn't define the č (latin small c with caron) character, would yield results with a c in the ncr column.
C:\>chcp 1250
Aktuell teckentabell: 1250
C:\>set nls_lang=.ee8mswin1250
C:\>sqlplus test/test
SQL*Plus: Release 11.1.0.6.0 - Production on Fri May 23 21:25:29 2008
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the OLAP option
SQL> select * from nls_database_parameters where parameter like '%CHARACTERSET';
PARAMETER              VALUE
NLS_CHARACTERSET       AL32UTF8
NLS_NCHAR_CHARACTERSET AL16UTF16
SQL> select unistr('\010d \00e8') val, utl_i18n.escape_reference(unistr('\010d \00e8'),'us7ascii') NCR from dual;
VAL NCR
č e c e
SQL> select unistr('\010d \00e8') val, utl_i18n.escape_reference(unistr('\010d \00e8'),'we8iso8859p1') NCR from dual;
VAL NCR
č e &# x10d; e     <- "è"
SQL> select unistr('\010d \00e8') val, utl_i18n.escape_reference(unistr('\010d \00e8'),'ee8iso8859p2') NCR from dual;
VAL NCR
č e č &# xe8;
SQL> select unistr('\010d \00e8') val, utl_i18n.escape_reference(unistr('\010d \00e8'),'cl8iso8859p5') NCR from dual;
VAL NCR
č e &# x10d; &# xe8;In the US7ASCII case, where it should be possible for all non-ascii characters to be escaped, it seems as if the actual escape step is skipped over.
Hope this helps to understand whether utl_i8n is usable or not in your case.
Message was edited by:
orafad
Fixed replaced character references :)

I can no longer connect with others using FaceTime after the mandatory update

I updated my iPad software and now when I try to connect with someone using FaceTime I can never fully connect.
Can anyone help me or seen this issue?

Unable to make or receive FaceTime calls after April 16, 2014
http://support.apple.com/kb/TS5419
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457
How to watch FaceTime calls on the big screen with Apple TV
http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

Bought Snow Leopard in order to download iTunes 11 in order to connect with iOS 7 iPhone, doesn't support iTunes 11

My problems started when I upgraded my iPhone's software to iOS 7.
I have moved from Melbourne, VIC to Perth, WA and my PC is in Melbourne. I live with my Girlfriend, and so I mainly use her desktop Mac to connect to iTunes, so you could imagine my surprise when I tried to connect after the fresh update and discovered that my iPhone will no longer connect to iTunes.
It appears as though you need iTunes 11 to connect with a iOS 7 device, which I was not aware of prior to the update. I then learnt that in order to upgrade to iTunes 11 you need OS X 10.6.8 or later.
Now I'm not very proficient with apple products (I always had an iRiver and PC) so while trying to find the right product on the mac store, I got seriously frustrated. Every time I thought I found what I was looking for, I would click "View in the mac store" which would not take me to a buy or download link, rather literally just a showcase of the features. I went in circles for over a **** hour trying to navigate the store. Finally I found the page where I could actually buy the software and found out you can't simple just download the update, you have to order it, which took about a month before it arrived.
I've just installed it ONLY to find it it's 10.6.3! WHICH IS COMPLETELY USELESS TO ME.
I searched for hours, and was assured that Snow Leopard was exactly what I needed to download the new iTunes. I don't know what to do, I'm not like every other apple customer, I don't have a lot of money, and this phone was a gift so the money I used to buy this update actually sent me broke for 2 weeks. Not to mention it's not even for my own computer, I need to know how to get my money back, and WHAT VERSION I NEED TO PUT MUSIC ON THIS **** PHONE.
I'm sorry if I've come off like every other appleh8tr. I just hate when I'm forced to buy something that does a lot of things when I only need it for one specific purpose. I've already had to buy a new charger cable, and after all of this, my account is frozen because I can't pay for a $1 app I tried to download (unsuccessfully)
Please help

T here is a table you can search that has all the various programs and versions
http://www.roaringapps.com
T here are tutorials or were on MacIntouch on what to do.
My advice is always and with Lion even more so to do a clean install, leave the old system as is, use a new drive and format it with Lion, and that way you make a clean break and clean out any carried apps and processes, which you can reinstall if Setup Assistant doesn't.
Expect to do some hardware upgrades as you go along, more RAM, maybe even higher quality, graphic cards, and start wtih a fresh system drive, a new drive for TimeMachine, and a drive to clone your system, clone your user volumes.
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.macperformanceguide.com/blog/2012/20120711_2-MacPro-internal-clone-ba ckup.html
Using Cloning as a Backup Strategy
http://www.bombich.com/
Create an OS X Lion Install disc
OS X Lion Install to Different Drive
How to create an OS X Lion installation disc MacFixIt
Migration Assistant Update for Mac OS X Snow Leopard
http://www.apple.com/support/lion/installrecovery/
http://reviews.cnet.com/8301-13727_7-20080989-263/how-to-create-an-os-x-lion-ins tallation-disc
http://www.coolestguyplanettech.com/how-to-make-a-bootable-osx-10-8-mountain-lio n-disc-or-drive-from-the-downloaded-mountain-lion-app/

A pop-up window advising of software update for Firefox appears and does not connect with server

The window suggests strongly that I update software but when I attempt to update it does nothing but try to connect with server and never does

* http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Remove the files in the updates and updates\0 folder.
You may need to delete active-update.xml and updates.xml as well if present.<br />
XP:
C:\Documents and Settings\<user>\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
(%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox)
If you have problems with updating then best is to download the full version and uninstall the currently installed version.
You may need to remove the Firefox program folder to do a clean install of the new version.
Do a clean (re-)install:
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Do not remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

USB connection with PC is not working after updating firefox OS 1.3 to 2.0 on my device. How to fix this?

After updating OS 1.3 to 2.0 usb connection to PC is not working. I am using firefox os device Flame. I cannot share files with my PC. Please help me to fix this problem.

''Ralph Daub [[#answer-694088|said]]''
<blockquote>
Hi Raiyad Raad,
I'm sorry to hear that you're having issues when connecting your Firefox OS device to the PC, after updating it from v1.3 to v2.0.
Please ensure that USB Storage and Media Storage are activated.
If you are still having issues after activating USB storage and restarting your device, please write back to us with the following information:
* What is the model of your phone?
* What is the OS version and Build ID found in the Device Information page? Please visit [https://support.mozilla.org/en-US/kb/how-do-i-find-what-version-firefox-os-i-have this link] if you need help finding the Build ID of your phone.
* Please describe the steps you took to update your device.
* Please provide the exact steps to reproduce the issue you are encountering.
* How often do you encounter this issue?
Please be sure to include as much detail as possible, including any websites that may exhibit this issue, and any error messages that you may be receiving, exactly as they appear. This will ensure that we have all the necessary information to investigate this behavior.
- Ralph
</blockquote>
I've activated the USB storage and media on the phone. But still it's not working. I'm using T2mobile Flame and my OS version is 2.0. Build ID: 20141016183911
I've written a blog about how I updated it here: http://raiyadraad.blogspot.com/2015/02/how-to-update-firefox-os-13-to-20-with.html
I'm having this problem after updating to firefox OS 2.0

How do you connect with a freaking person? I have paid all of this money for Photoshop and Illustrator since July 2014 and can't access the programs. This is a rip off? Who can help me?

How can I connect with an Adobe representative to assist me with this Creative Cloud and the software that I paid for since July 2014 and can't use it on my computer?

You will likely need to wait until the weekend passes but your options are chat or phone...
800-833-6687 (US daytime only 5AM-7PM PST, Monday-Friday)
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Creative Cloud support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )

How to send a mail with HTML body from Oracle

Hi Team,
Can somebody guide me how to send a mail with HTML body from oracle.
Here is the piece of code i am trying to send a mail.
procedure SEND_MAIL is
cursor c_1 is select * from table_name;
l_mail_id varchar2(40);
-- ls_mailhost VARCHAR2(64) := Mailhost;
ls_from VARCHAR2(64) := ‘[email protected]’
ls_subject VARCHAR2(200);
ls_to VARCHAR2(64);
l_mail_conn UTL_SMTP.connection;
ls_left_menu_name VARCHAR2(64);
ll_emp_num number(8);
begin
for i in c_1 loop
begin
l_mail_conn := UTL_SMTP.OPEN_CONNECTION('IP');
UTL_SMTP.HELO(l_mail_conn, 'IP');
UTL_SMTP.MAIL(l_mail_conn, LS_FROM);
UTL_SMTP.RCPT(L_mail_conn, LS_TO);
UTL_SMTP.DATA(l_mail_conn,'From: ' ||ls_from || utl_tcp.crlf ||
'To: ' ||ls_to || utl_tcp.crlf ||
'Subject: ' ||ls_subject|| utl_tcp.crlf);
UTL_SMTP.QUIT(l_mail_conn);
exception
when no_data_found then
null;
when others then
RAISE_APPLICATION_ERROR(-20000, 'Failed to send mail due to the following error: ' || sqlerrm);
end;
end loop;
end;
Thnx

Hi Nicolas!
Have you tried to set "Output Format" for "RAW Text" to HTM in SCOT.
If HTM is missing in your dropdown-list, you could check out table SXCONVERT2. Copy the line with category T/format TXT, and change the format from TXT to HTM. The existing function
SX_OBJECT_CONVERT__T.TXT does not need to be changed. Now you should be able to choose HTM in SCOT. You will probably need som HTML-tags in your text to make it look good.
Hope this helps!
Regards
Geir

Connection with html portal to r/3 4.6c

Similar Messages

Maybe you are looking for