Connection with PC Suite stopped working

Hi there,
Up until last week, PC Suite and my phone use to work perfectly. For some reason, i can no longer connect my phone (nokia e61i) and laptop anymore.
I have uninstall / re-installed PC suite without success
When I try ti pair my phone again, i go into the connection window, seach for a bluetooth connection, then in step 3 of 4 PC Suite show's a list of phone that i use to be connected to (before i had the problem). i cannot go any further in the connection setup process. I then tried to unpair my phone, and I get an error message 'cannot unpair phone'.
I really don't know what the problem is, but this is causing major problems for me as I use my phone calendar everyday and I can no loger sync with my laptop. Appreciate any assistance. Below are my specs:
PC Connectivity Solution:
Version 8.47.6.0
[Nokia Connectivity Cable Driver:]
Version 7.1.8.0
Operating system:
Microsoft Windows XP 32-bit Edition, Service Pack 2
Language: English
Language for non-Unicode programs: English
Detected Internet browsers:
- Microsoft Internet Explorer 7.0 (Default browser)
Detected Bluetooth stacks:
- Microsoft (Version: 5.1.2600, Build: 2180)
- Broadcomm (Version: 5.1.0, Build: 4800)
Thanks
Alex

I have probably the same problem it was working fine, but some time in January 2009 it the connection with PC Suite ceased working. I have produced this error over cable as well as IR.
Version of Windows: Microsoft Windows XP Professional Version 2002, Service Pack 2
Version of PC Suite: 7 1 18 0 eng web
Connection method: cable, and IR?
Phone: E61i
1. I connect the phone.
2. PC Suite says "Click here to connect a phone"
3. I click and the connection wizard opens
4. I select "Infrared"
5. PC Suite immediately opens new window that says "You have now the following connections available:
Nokia E61i IrDA"
6. I click the green button and return to PC Suite that still says "Click here to connect a phone"
7. If I click on synchronisation, the synch button is not enabled: I cannot synchronise or use any other application in PC Suite. But if I right click the IR symbol on windows and select "transfer files" then I can send a file to the phone.
Would really appreciate help on this.
Thanks

Similar Messages

Lightroom refuses the correct serial number. Creative Suite stop working. Adobe is treating people with total disrespect and does not even have a phone number where we could call. I will move soon to other software,

Creative Suite stop working after backing up the program from Time Machine. Adobe is treating people with total disrespect and does not even have a phone number where we could call. I will move soon to other software. I paid for the software and it is totally abusive this behavior from Adobe.

Trying to reinstall via transfer does not work.
Phone support | Orders, returns exchanges
http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

E71x not vibrate after connected with PC Suite

Anyone has the same problem? My E71x purchased 2 days ago does not vibrate while and after connected with PC Suite. I had to turn off and turn it back on to activate the vibrating thing.
Thanks

mmm... ill describe the whole situation:
phone has 2 days old
I connected it to the PC
Running PC SUITE
All was functioning normal, i had about half charge
i got a phone call from my gf, when i picked up the call, i disconnected the phone
the line dropped dead. so did the phone
i tried to restart it to no avail
i plugged it to the pc, didnt work
i removed the batter, didnt work
so i connected it to the power cord, and the lights turned on
i disconnected then tried to boot it up, and didnt work
i reconnected the power cord and started it while on external power, and it did start, showing just 1 little bar of battery.
I left it there for about 1hr and removed it, and charge was FULL
i reconnected to PC and im monitoring it and it hasn't discharged
so its weird... <.<
my guess is that unlike HTC or Sony Ericsson phones, the data cable and hte power cable CAN be connected at the SAME TIME. that would be the only explanaition on why it doenst charge up on the USB (but ohter theory of mine is that if i connect it to the PC on file trnasfer mode, it might charge it)

ITunes crashes when doing a power search. I get a Microsoft Visual C Runtime Library Error message: Program C:\Program Files (x86)\iTunes\iTunes.exe R6025. Pure virtual functional call. If I select ok, Windows 7 pops up with iTunes has stopped working

iTunes crashes when doing a power search. I get a Microsoft Visual C Runtime Library Error message: Program C:\Program Files (x86)\iTunes\iTunes.exe R6025. Pure virtual functional call. If I select ok, Windows 7 pops up with iTunes has stopped working and then it shuts iTunes down. Anyone else every have this issue. Any ideas on a fix?
Thanks,

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

HT1199 Hai, i tried to open itunes on my windows 8 laptop but it comes out with 'iTunes has stop working' notification and need to close the program everytime i try to load it. Please help! thanks.

Hai, i tried to open itunes on my windows 8 laptop but it comes out with 'iTunes has stop working' notification and need to close the program everytime i try to load it. Please help! thanks.

Hi ajay-9,
Thanks for visiting Apple Support Communities.
The steps in this article can help if iTunes is quitting unexpectedly on your PC:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Cheers,
Jeremy

Why the 3G connection with Wind don't work on iPhone 4S (iOS 5.0)??

Why the 3G connection with Wind don't work on iPhone 4S (iOS 5.0)??

Because Wind is not an officially supported iPhone carrier and Apple warns that using an iPhone on a non-supported carrier's network may mean that some features may not be available or work at all.

Since upgrading, both our wireless printers are still visible, but OSX will not connect with them. Both work via connecting from other sources via the same wireless router (airport). What do I need to do to get my printing/scanning working again?

Since upgrading, both our wireless printers are still visible, but OSX will not connect with them. Both work via connecting from other sources via the same wireless router (airport). What do I need to do to get my printing/scanning working again?

First thing to try is reset Printing System:
OS X Mavericks: Reset the printing system
Next would be reset the router (power off 15 secs then back on). And, 2 minutes later, reset the printers 1 by 1.

PC Suite stops working with Bluetooth after Laptop...

I use PC Suite and Bluetooth to connect to my Phone. I use the Synchronise, and the Messages feature a great deal. It all works great after a reboot, and I think it's a real credit to Nokia that they provide this free and improve their standing compared to other manufacturers.
However, the latest versions of PC Suite have taken a backward step in hardware compatibility. Previously, no matter what state my laptop was in - ie rebooted, returned from hibernate or standby, the laptop would connect to my phone over Bluetooth, and synchronizing would happen. When my phone went out of range, the connection would drop, and when it came back into range, the connection would re-establish and synchronizing would start again - wonderful!
Now, this only works after clean reboot, and after I have manually clicked on "Get Connected". After my laptop returns from standby, if I try "Get Connected" I get the error:
"Cannot use the connection type. Check that all the needed hardware, software and drivers are available. (Code: OpenMedia)"
To get PC Suite working with Bluetooth after returning from standby I run a Repair, after which it works beautifully.
Is this a known fault? I have uninstalled and re-installed PC Suite and the BT Stack as recommended in other posts to solve other issues. My configuration is:
Operating system: Microsoft Windows XP
Nokia PC Suite: Version 6.82.22.0
Bluetooth Stack for Windows by Toshiba v4.00.23(D) SP2
Bluetooth Specification: Version 2.0, 1.2, 1.1
Many thanks...

Thanks for your response Miksu. You have pointed me to the right place. It is the connection manager that fails to recognise the BT stack that causes my problems. This is always resolved by a repair. It seems that the order of initiation is very important which may be why Luist has started to have the problem.
In my experience, once things stop to work, I've had to strip out any subsequent installs.
My PCSuite also stopped working after it installed cable connection manager (or something like that) without me asking. I found it in Control Panel->Add/Remove programs. I removed it and PC Suite started to work again, so I completely removed PC Suite then re-installed, and allowed it to add the relevant devices relating to my phone (about 4 devices alltogether) but alas this did not solve my "return from standby" issue. I think I need to remove PC Suite and then Bluetooth, and maybe something else before re-installing - I'll leave that for a rainy day.
Thanks again Miksu

Can anyone help with a WRT54G connection issue - it just stopped working

I have a Dell running Windows XP. I have a DSL connection with a Westell 6100 modem connected to a Linksys WRT54G router connected to my main computer. I use the router for a wireless connection to my laptop. This setup worked fine for years - until a few days ago. I no longer have internet access on my laptop and main computer.
If I connect from the modem directly to the main computer, I have internet access. But as soon as I put the router back in - I have no access.
All the appropriate lights on the modem and router are lit. When I do try to access the internet I get the dreaded PAGE CANNOT BE DISPLAYED. When I run the diagnostic, the error log shows: "Not all base service provider entries could be found in the winsock catalog. A reset is needed". I don’t know if this is a standard catch-all error or not?
Everything was fine until a few days ago when I just lost access. Do I need a new router? I hate to buy one and then find out something was corrupted on my computer instead. :-(
Thanks!

When connected from modem to PC directly (no router) and I type in ip[config /all (don't know if this is what i should do) -- I get:
IP Address 192.168.1.100
Subnet Mask 255.255.255.0
Default Gateway 192.168.1.1
DHCP Server 192.168.1.1
DNS Servers 192.168.1.1
Does this mean I should try to change the LinkSys Router?
I will go look there next.

Lightening wire with Bose speaker stopped working

Lightening wire stopped working with Bose speaker ... bought another one and this one is not working either - i don't recall changing any phone settings to make it stop working - any ideas? Have also tried it on other speaker devices at home, so I think its the phone. I have however connected the phone to my car using the same port and it works fine so I think the port is ok ... so I am back to thinking its the settings but can't figure out which ones.

To connect an iPhone 5 to a Bose SoundDock ( not the Original SoundDock )
You need an adapter which plugs into the Bose 30 pin plug and has a lightning plug at other end
There are two types
http://store.apple.com/uk/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=45
or this
http://store.apple.com/uk/product/MD824ZM/A/lightning-to-30-pin-adapter-02m?fnod e=45
Make sure they are genuine Apple adapters they work perfectly ,most "eBay" style rip-offs do not
This overcomes the issue of having any dock with the old 30 pin plug and a lightning device

Wifi is connected but internet has stopped working

I have had my new ipod touch for a week and its been working fine. i had it connected to my wifi network at home with no problems until this morning when it stopped working. the wifi connectivity is fine and works with everything else, and the ipod reads the wifi network but everything i try to poen that needs connection says its not connected. Any suggestions? i tried resetting the network to no avail and even deleted all content and settings but it still wont work any more. i wondered if its possible for there to be a fault with it rather than a software issue. i am running the latest version of everything and my old one as well as my ipad works fine.

Which one did you reset? your iPod's network or the router?
Have you checked the wi-fi configuration? its in the arrow on the right side of the SSID (in iPod), when you touch it, IP address will come out. There are 3 Configurations to choose from, DHCP, BOOTP, STATIC.
Is your router was set to DHCP? your iPod should have a lease of IP from the router. if its blank or someting like 168.x.x.x, try use the STATIC...just put on your network segment (192.168.x.x) and the gateway of course...

64bit OS Problem : Addon is connected then Addon is stopped working

Hi
I'm SAP Addon programer for SAPB1 2005B, 2007B up to 8.8. I don't have such problem so far.
I cleaned and re-compiled the original addon program into x86 ( tested like 5 times ).
I re-do the installer using B1DE default is Any CPU, changed to x86 and recompiled into specific folder.
( I got new exe file with new date time stamp )
I always clean before re-compile and made checking everytime before and after compilation, so there is no mistake and I'm sure I took the file compiled into x86.
Then I use AddOnRegDataGen to re-generate ard file. ( Again I made sure old ARD file renamed and got a new ARD file )
Installation is perfect and I can start the addon ( automatically and manually ) but on this 64 bit OS addon.exe file stopped working after a few seconds.
I'm running both addon on my own server and another test server ( both 32 bit Win XP and 2008 ) they are working with no problem. I have other customers using this Addon on 32bit Server without having any problem.
I'm using Administrator account and run the programs with "Run as Administrator"
I am running out of idea at this moment. Please answer me experts.
Regards
Kalvin

Hello Kalvin,
If this addon is running on several computers wihtout any errors, the problem will be with the computer which you try to run.
I belevie you have compiled the correct code and target cpu....
What kind of message do you get? Windows Error, or just simpli sap b1 message: addon disconnected please notify emial address ... etc.
If windows error:
I would do the following:
1. start the addon, and wait while it is dumps (gets disconnected)
2. Check the event log of the machine and see is there any kind of errors according to your addon
maybe some components is missing like progress bars, etc.
if a B1 messagebox Error, it maybe comes from corrupt DI API installation, or something connected to this. I think, because when addons is connects, you first it connets the UI API, then DI API and it is takes a while....
1. clean up SM_OBS_DLL folder
2. start the addon, and wait while it is dumps (gets disconnected)
3. check SM_OBS_DLL folder. if it is created and has some files inside, the DI API is connected to the server......
Please note: Sometimes the addons are running, but getting a slow response from the SQL server (SAP B1 also). In this cases the SAP B1 sends an error message about addon is disconnected, but if you check with task manager, you can see that your addon.exe is running fine. It could happened, that you addon is ok, but while downloading the DI API (takes 200 MBS) SAP B1 fieels your addon is disconnected.
I have seen several systems where the addon startup order was solved this issue..... (if you have more than one addon running in your system).
Well I am waiting for you test results based on above.
Regards
János

Why does iTunes crash with 'iTunes has stopped working' on startup?

This only happens when the computer is connected to the internet. If I switch wi-fi off first, iTunes can start, and then I can switch it on again, and it works just fine. It is really annoying! I have seen elsewhere that the 'iTunes has stopped working' message can be caused by outdated graphics card drivers. I have the latest version of both iTunes for Win 7, and the latest graphics drivers.
I have also tried 'repairing' iTunes, and deinstalling and reinstalling it.
The message 'accessing iTunes store' typically pops up just before iTunes crashes, about ten seconds after I click the iTunes icon to start it.
The error goes on to say 'A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.'
THANKS IN ADVANCE!!!
Jonathan

Hi, kerry229.
Here are a couple helpful troubleshooting articles that I would recommend when experiencing issues with iTunes becoming unresponsive or unexpectedly closing.
iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch
http://support.apple.com/kb/TS3219
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123
Cheers,
Jason H.

Weird problem syncing iPhone 3G with Outlook. Stopped working?

Hi,
I really hope this isn't a repetitive question; I tried searching around the internet and either found no solution that worked, or problems similar but not quite the same as mine.
Anyhow, I just got an iPhone 3G last week and I'm running a PC with Outlook to sync my phone. The first few days all the syncs went 100%, updates calendar/contacts no problem. Then, this afternoon it stopped working. No matter what updates I make to my Outlook or my iPhone, nothing will sync. I plug in the iPhone and sync through iTunes, it says "syncing" but no longer goes into "syncing contacts" then "syncing calendar" etc. I even tried importing my IE bookmarks and got nothing. It almost seems like iTunes stopped "talking" to Outlook?
I've tried playing with the settings in the info tab of iTunes, I've played around in the trust center of Outlook, made new data files, etc and I just uninstalled/reinstalled iTunes, all doing nothing.
Any idea?
Thanks,
John

After almost 1 week of sheer frustrations, I have been unable to connect my Iphone 3G to my exchange server at work.
I have tried probably every method discussed here, including restoring my iphone 3G several times. My issue has been elevated all the way up to apple engineering, and still no solution.
It appears that the issue is that I cannot connect because my company is using Exchange server 2003 with SP1.
I can connect any Windows Smartphone or Pocket PC and it will sync in what seems seconds….very fast. I have used windows phones connected to our server for more than 4 years, never an issue.
My company has the attitude of we “We don’t want you to connect, you are lucky to be able to use active sync on windows phones!!” So their change is not probable.
Has anyone found a way to connect Iphone 3G to an Exchange Server 2003, SP1?

Saved .htm pages with hover content stopped working

Hi,
I save some web pages for offline viewing. Some of them have content that shows up only '''when you hover''' over them. Examples would be *.wikia.com (navigations) and danbooru (ex. http://danbooru.donmai.us/posts/1675488?pool_id=8335). I save them by '''Web page, complete''' option. They used to work but I just found out that now they don't.
I checked with IE and Chrome but found out that it stopped working there too. I tried using Firefox with add-ons disabled and reverted to older versions (30.0 & 24.0) but it's not working there anymore. I even restarted my PC. I thought maybe it was cache related by even newly saved pages don't work.
I am sure they did work because I usually save my files as mhtml to avoid too much clutter but hover content doesn't work there. The last time I saw it working was on '''September 25, 2014'''.
Thank you in advance.

I have checked the offline wikia page you provided. All the images are there. All the js files are there. But some script works and some doesn't. Unfortunately it is impractical to debug the page to see where the failure occurred.
If all your save pages are based on the same template, by which I mean only the pictures vary, but the pages are based on the same underlying mechanism, then it might be worthwhile to learn some simple scripting. It takes just a few lines of code to re-enable the functionality you want (btw, it is not hovering -- you have to actually click the thumbnail).
However, if the pages differ a lot, then I am not aware of any practical way of achieving what you want except trying some of these plugins to see if they work better:
[http://stackoverflow.com/questions/2061311/firefox-plug-in-that-downloads-a-complete-webpage Firefox plug-in that downloads a complete webpage?]
Or google and see if you can find more.
Wikipedia is probably the most archaic website I use. Obviously, if even wikipedia doesn't save properly, as mentioned in cor-el's link, I don't think you can expect to have much luck with wikia. This is just to give you a realistic assessment of the difficulty level of what you are trying to accomplish.
I used to think that my computer was the safest place to keep everything -- when I was using a dial-up connection. So I also carried out similar endeavors to preserve everything useful on my computer, just as what you are doing right now. I know how much work it takes, and I could never get things 100% correct, because webpages are generally not designed to be saved locally.
Now I am sure most of the things on the internet will outlast my computer. And I have a broadband so everything is just one click away in firefox. So I am never bothering again.
Sorry I wish I could help you more, but this is the best I can do. Good luck!

Connection with PC Suite stopped working

Similar Messages

Maybe you are looking for