Connections per user

I have a WAVE 474 running v4.2.3.    I see 20-30 connections per user, with several to the same host and sequential ports.   Ex.  x.x.x.y:56678, 56679, 56680.. to 56685 going to x.x.x.z:3456...3480.    Is this correct?   I am running out of TFO connections on this box and am not sure what is going on.   I have 3 other sites with 474's and the connections/user appear to be much lower.

Hi,
This type of behavior is usually indicative of a virus or maybe a security scanner of sorts on your network.
The fact that WAAS is optimizing the flows and taking up TFO resources is unfortunate, but there is not much you can do from a WAAS perspective to stop these PC's from consuming your TFO resources. 
An interim work around would be to use a WCCP redirect list or an inline interception ACL (whichever is applicable to that site) and bypass those IPs completely from WAAS interception.
However, the long term solution would be resolving the virus/ disabling the security scanner.
Regards,
Mike Korenbaum
Cisco Data Center PDI Help Desk - http://www.cisco.com/go/pdihelpdesk

Similar Messages

  • VDI 1 connection per user

    Hi,
    we have a VDI with Gateway,
    if the user connect from one VM, and is trying to connect the second time he gets the same session, and the first rds closes
    but if I connect with the same user name I get a different session
    is it possible for VDI to just limit one user to one VM

    Hi,
    Can you let us know, what’s you mean to explain for this sentence?
    “If the user connect from one VM, and is trying to connect the second time he gets the same session, and the first rds closes”.
    Actually “VM’s are designed for 1 concurrent connection (personal VMs or pooled VMs). Once a person logs off, the machine will be free for the next person. If a user disconnects, you can use GPO to make sure the disconnected sessions are purged after a
    certain amount of time. You can also use Hyper-V to "rollback" the VM to its original state so that it is ready for the next user (i.e. whatever the last user did to the VM is overwritten with a snapshot of the original VM).” (Quoted from comment by "Kristin”
    in below thread).
    Refer “Microsoft VDI = 1 virtual desktop VM per connection?” thread
    for more information.
    Apart from this, refer below article for more information.
    1.  Microsoft VDI - Overview
    2.  Virtualization: Use the RD Gateway
    Hope it helps!
    Thanks.

  • Server 2008 R2 RDP: limit max number of rdp connections per user group?

    Hello everyone,
    I have a Windows Server 2008 R2 with RDP installed.
    I want to create a couple of user groups which will have 5 different users in each. Then I would like to limit RDP connections, let's say 2 connections for the first group and 3 connections for the second group. For example, if 2 users from Group 1 are connected
    then when a 3rd user from Group 1 tries to connect it will be rejected to connect, but 3 users from Group 2 still can connect. Is it doable?
    Thanks in advance.

    Hi,
    I would like to check if you need further assistance.
    If you need help to create script, please post your questions in our related forums.
    http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home
    Thanks.
    Jeremy Wu
    TechNet Community Support

  • 1 connection per user using Tomcat?

    Hi all, I've created a connection pool on Tomcat 5 and during testing realised that I couldn't run more than 1 query to my web app i.e. I opened up multiple windows and ran each query at the same time. Is there any way (out of interest) of setting up the connection pool so that a user can be assigned more than 1 connection if they so wish?
    Thanks

    Usually a connection is retrieved from a pool when a transaction is performed.
    This means that one connection is associated with one transaction not a user:
    1) user logins
    2) Get Connection
    3) carry out a transaction
    4) return connection to pool
    5) Get Connection
    6) carry out a transaction
    7) return connection to pool
    8) user logs out
    You seem to be giving each user a connection which will lead to the issues you are having:
    1) user logins
    2) get connection
    3) carries out a transaction
    4) carries out another transaction
    5) user logs out
    6) return connection to pool

  • AFP creating 2 connections per account

    Ok, it's the first time we are having all the kids in our class log in to the server. Once they log in, they are able to do all the normal stuff we allow them to do. Our problem is when I open Server Admin, I'm seeing double the connections in AFP.
    Right now, we have 32 students logged into to the server. AFP shows 64 students, each student is logged in twice in AFP.
    Not sure why this is happening, we have there home folders setup on the server, and we have shares mounted when they log in, but it's currently set to use the same user that is logged in for credentials.
    Last year we never had this issue, and it only seems to be a problem this year.
    Any help would be appreciated!

    Dear JGruber
    I have the same issue and done some research about it. These are my findings.
    I've set up my environment to be fully Kereborised. The issue I've encountered is that neither the "Connect as" (finder side bar) nor the "Connect to Server..." (Go menu) worked properly. Although users were able to access their home folder and group share points, it remained cumbersome to access the different other shares on the server.
    In resolving the issue I've found a way to get things working properly. I've used WGM to set some Preferences in the Computer and User Groups login panes: "Mount share point with user's name and settings". All worked great from now. I could access the shares and the using the commands: "Connect as" and "Connect to Server..."
    But from this point on, I was using two connections per user. It kind of makes sense? One to log in using Kereberos and one other used by the log in of the client system (Preference seting on server level).
    Although it was working, I still was not satisfied. On my 10.3 machine I could access the shares using Kereberos with just 1 user. Since this computer was not bound I always had to create a Kereberos ticket application manually utilizing the Kereberos application whih was populated automatically. So on I've tried to mimic the situation by doing the following:
    + disconnect all shares but the home
    + open manually the Kereberos application
    + kill the currently used ticket (all if needed)
    + create a new ticket for the logged in user
    Eureka, all was working perfectly. 1 user logged in. Access to the correct shares and then mentioned commands working as expected.
    Since I neither have the skills nor the time to learn, I've never scripted the solution as a log in script. So in the end:
    + I know that logging in and Kereberos ... not quite as expecting. It might be a bug?
    + I still have two logged AFP users.
    Oppose Camelot, I disagree that a user per connected share is the way it should be. A limited edition only allows 5 simultaneous AFP connections. So when a user requires access too 6 shares, ...
    Other point, supporting my disagreement. I only require 2 connections for 4 shares per user. So something is definitely not working as intended. And I've done quite some investigation on the topic (both web/manuals study and trial and error)
    Last but not least. I didn't post a solution, but maybe someone picks it up a find a decent solution/workaround.

  • Installed the RDS 2012 Server License per user CAL (5pcs) after not allow over two users remote desktop connection problem

    I have successfully to installed the RDS 2012 Server R2 per user CAL (5pcs) Open License after is found not allow over two users to remote desktop connection on this Server problem, I try to uninstall the license and then (internet on-line & telephone
    call Microsoft Activate Center get the activate key) to reinstall is still same of the result on below problem.
    Select a user disconnect so that you can sign in.
    There are too many users signed in
    User1 Active
    User2 Active
    () Force disconnect of the user

    Hi,
    In addition you can also refer following article for RDL configuration.
    RD Licensing Configuration on Windows Server 2012
    http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Network.http.max-persistent-connections-per-server keeps reverting to user set 4

    I didn't used to have this problem as far as I'm aware, but as of recently, I've noticed that if I try to download more than 4 of one thing at a time from the same site, it would fail. For instance, if I have up 5 web pages of streaming content, only 4 will load, the other 5th one will do nothing until I finish one of the others. Upon looking up some information on this, I saw that the network.http.max-persistent-connections-per-server is set at "user set = 4", and if I change that number to anything else, it corresponds. If I click to 'reset' the number, it goes to the default of 6 - which is still less than what it used to be. I used to not even have a limit on this as far as I'm aware, or if I did, it was well beyond 10 and that wasn't a product of me manipulating it.
    What I'm asking is this:
    1) How do I make this so it permanently switches to a higher number? Every time I reset it to 6 or I manually change the number to something higher, once I close it, those settings go back to 4.
    2) Why is it reverting and not staying the way I change it?
    3) What's the purpose of this and why is it just recently doing it when I haven't put any new add-ons or made any other refinements to Firefox that I'm aware of?
    Any help would be appreciated

    Two possible causes for it resetting to 4 that I can think of.
    # You have an add-on handing that pref and that is resetting it to 4 when Firefox is restarted.
    # That pref is set via user.js and that causes it to go to that value as Firefox starts.
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes <br />
    http://kb.mozillazine.org/User.js_file

  • Flex connect with a per user ACL with APs locally switched

    Hi all,
    Does flex connect allow a per user ACL to be downloaded to the session with local switched, central authentication? We are using ISE for the central policy engine and have setup dACL for wired but am about to embark on WLAN. The controller is a 5508 and the. APs are 3700's.
    Second question- if the flex connect APs don't do any form of per user ACL, the other option is to have the units in regular mode where they are both centrally switched and centrally authenticated which I understand to support a per user ACL. Our WAN links are between 10mbps - 30mbps and the most latency would be around 40ms. Will this cause issues at all with the size WAN links and latency?
    Thanks
    Sent from Cisco Technical Support iPad App

    Well you are running v7.6 so FlexConnect per user radius ACL's are supported per this doc since v7.5.
    http://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/112042-technote-product-00.html#anc9
    As far as WAN latency, 200ms is good, but it depends in your WAN utilization now and how many AP's you plan on installing and the increase in wireless traffic across your WAN. There is a minimum requirement, but it's up to you in the end to make sure you have enough bandwidth or else you will need to QoS the capwap traffic to ensure the APs don't bounce from connected to stand alone.
    Sent from Cisco Technical Support iPhone App

  • TV Access Connection​s per-user settings?

    I needed to set up a 2nd user acct profile on my T500 (Win XP Pro) to use for a special purpose and need for the Wireless Radio to be powered off when this user's desktop loads (same as clicking the TVAC icon in the system tray and choosing Power Off Wireless Radio).
    So far my experience has been that any TVAC changes made while using the 2nd user account are carried over to the 1st user acct, and vice-versa.  I would like settings to be on a per-user basis and not applied globally to all users.  Is this possible, and if so how can I do it?
    Using the system tray icon, I was able to have the radio powered off in the 2nd acct and powered on in the 1st acct.  And when the 2nd user's desktop loads the icon is in fact powered off, at least initially, but then the auto-connect popup appears and automatically powers on the radio.  If I could configure the 2nd acct to not attempt to connect automatically that would work for me, but I can't figure out how that is possible.
    Any help is appreciated.
    Regards,
    Frank

    It is not possible to do per user setting in Access Connections.

  • Limit on devices per user that can connect to Office Mobile or Office for iPad apps?

    We are are on an E3 license for Office 365. What is the maximum number of devices that a user can connect to the various mobile apps? I had hard 5 was the max, but can not find any documentation to support this. We are interested in using both Office Mobile
    and the new Office for iPad apps and want to understand any restrictions at the user level. Thanks.

    Hi,
    You are correct 5 devices max per user, these devices could be a PC/Tablet/Phone etc... (they all count as a device)
    see the second row on this page http://office.microsoft.com/en-gb/business/compare-all-office-365-for-business-plans-FX104051403.aspx
    Daniel

  • Unity Connection on BE6K. 10 messages per user????

    I must be misreading this surely! The BE6K Data Sheet quotes
    "Voicemail Capacity: 10 voicemail messages per user."
    http://www.cisco.com/en/US/partner/prod/collateral/voicesw/ps6788/vcallcon/ps11370/data_sheet_c78-718398_ps11369_Products_Partner_Resources.html
    Someone please tell me this is a misprint!
    Rich

    Its an estimate.   Meaning if you have 1000 users with voicemail boxes, and you limit them to x minutes, its roughly 10 voicemails.
    Voicemail usuage is based on minutes, not so much the number of messages.  IE, (1) message that is 10 minutes long, (2) messages that are 5 minutes long, etc.

  • CUPS 8.6 - Supporting Multiple SIP Domains on a per-user basis

    Working on a CUPS 8.6 PoC with a customer who currently is running a deployed OCS environment. 
    Users all sign into a single domain internally but have multiple SMTP domains for email as this customer has many different companies they have aquired.
    OCS  is able to support and route multiple SIP domains by specifing the SIP address under AD User settings such that two users both signed into the same OCS server can send IM's to each other even though they have different SIP addresses.  sip:[email protected] , sip:[email protected]
    CUPS on the other hand does not seem to allow this on a per-user basis.  It places every user in the sip domain that the server is a member of.
    The Jabber client allows you to specify a domain but I am not how this is used as the actual user account in CUPS is only ever the one domain and if you try and specify a different domain in the Jabber Connection Settings, it will not allow you to login.
    It is not a big deal for internal communications if everyone is on the same domain, but where it is important is for future B2B IM.  Users need to be able to give out THEIR IM address with THEIR respective domain.
    Does anyone else know for a fact that I will only be able to have one domain per CUP cluster?
    Any thoughts on this design?

    Not sure on the design perspective but as for CUPS Domain, we can only have single domain per cluster. As you have already found out that for any user licensed for CUPS, their IM address would be userid@CUPSDomain
    CUPS does have funtionality of federating with foreign domains such as AOL/GoogleTalk/WebEx Connect.

  • ESS Persoanl Data Error(Screen output without connection to user)

    Hi All,
            When i am trying to Save my data in my ESS----->Personal Info -
    >Personal Data, i am getting below error, any body know how to resolve this issue, please let me know.
    Screen output without connection to user., error key: RFC_ERROR_SYSTEM_FAILURE:
    com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Screen output without connection to user., error key: RFC_ERROR_SYSTEM_FAILURE
         at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
         at com.sap.xss.per.fc.persinfo.FcPersInfo.save(FcPersInfo.java:440)
         at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfo.save(InternalFcPersInfo.java:770)
         at com.sap.xss.per.fc.persinfo.FcPersInfoInterface.save(FcPersInfoInterface.java:186)
         at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfoInterface.save(InternalFcPersInfoInterface.java:275)
         at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfoInterface$External.save(InternalFcPersInfoInterface.java:435)
         at com.sap.xss.per.vc.reviewnavi.VcPersInfoReviewNavi.onEvent(VcPersInfoReviewNavi.java:213)
         at com.sap.xss.per.vc.reviewnavi.wdp.InternalVcPersInfoReviewNavi.onEvent(InternalVcPersInfoReviewNavi.java:171)
         at com.sap.xss.per.vc.reviewnavi.VcPersInfoReviewNaviInterface.onEvent(VcPersInfoReviewNaviInterface.java:115)
         at com.sap.xss.per.vc.reviewnavi.wdp.InternalVcPersInfoReviewNaviInterface.onEvent(InternalVcPersInfoReviewNaviInterface.java:124)
         at com.sap.xss.per.vc.reviewnavi.wdp.InternalVcPersInfoReviewNaviInterface$External.onEvent(InternalVcPersInfoReviewNaviInterface.java:200)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:533)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:437)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.access$600(FPMComponent.java:78)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.raiseSaveEvent(FPMComponent.java:951)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.raiseSaveEvent(FPMComponent.java:1114)
         at com.sap.xss.per.vc.reviewnavi.VcPersInfoReviewNavi.next(VcPersInfoReviewNavi.java:227)
         at com.sap.xss.per.vc.reviewnavi.wdp.InternalVcPersInfoReviewNavi.next(InternalVcPersInfoReviewNavi.java:175)
         at com.sap.xss.per.vc.reviewnavi.ReviewNaviView.onActionNext(ReviewNaviView.java:153)
         at com.sap.xss.per.vc.reviewnavi.wdp.InternalReviewNaviView.wdInvokeEventHandler(InternalReviewNaviView.java:173)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
         at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
         at com.sap.tc.webdynpro.portal.pb.impl.localwd.LocalApplicationProxy.sendDataAndProcessAction(LocalApplicationProxy.java:77)
         at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1299)
         at com.sap.portal.pb.PageBuilder.SendDataAndProcessAction(PageBuilder.java:326)
         at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:868)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Caused by: com.sap.aii.proxy.framework.core.BaseProxyException: Screen output without connection to user., error key: RFC_ERROR_SYSTEM_FAILURE
         at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
         at com.sap.xss.per.model.mac.HRXSS_PER_MAC.hrxss_Per_Save(HRXSS_PER_MAC.java:478)
         at com.sap.xss.per.model.mac.Hrxss_Per_Save_Input.doExecute(Hrxss_Per_Save_Input.java:137)
         at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
         ... 64 more
    and after that i went to ST22 Transaction Code in my ECC System i found two types of DUMP errors,
    the below are those details.
    Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED_NO
    Exception              CX_SY_REF_IS_INITIAL
    Date and Time          09/09/2008 08:19:16
    Short text
    Access via 'NULL' object reference not possible.
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLHRXSS_PER_MAC" had to be terminated because it
    has
    come across a statement that unfortunately cannot be executed.
    What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
    Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
    caught in
    procedure "HRXSS_PER_CLEANUP" "(FUNCTION)", nor was it propagated by a RAISING
    clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component.
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
    How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "OBJECTS_OBJREF_NOT_ASSIGNED_NO" "CX_SY_REF_IS_INITIAL"
    "SAPLHRXSS_PER_MAC" or "LHRXSS_PER_MACU04"
    "HRXSS_PER_CLEANUP"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
    To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
    Display the system log by calling transaction SM21.
    Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
    In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    The exception must either be prevented, caught within proedure
    "HRXSS_PER_CLEANUP" "(FUNCTION)", or its possible occurrence must be declared
    in the
    RAISING clause of the procedure.
    To prevent the exception, note the following:
    System environment
    SAP-Release 700
    Application server... "ERPDEV01"
    Network address...... "10.88.1.6"
    Operating system..... "Windows NT"
    Release.............. "5.2"
    Hardware type........ "4x AMD64 Level"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 0
    Shortdump setting.... "full"
    Database server... "ERPDEV01"
    Database type..... "MSSQL"
    Database name..... "DE1"
    Database user ID.. "de1"
    Char.set.... "C"
    SAP kernel....... 700
    created (date)... "Oct 23 2007 00:33:51"
    create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
    Database version. "SQL_Server_8.00 "
    Patch level. 133
    Patch text.. " "
    Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
    SAP database version. 700
    Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
    NT 6.0"
    Memory consumption
    Roll.... 16192
    EM...... 4189840
    Heap.... 0
    Page.... 0
    MM Used. 1229856
    MM Free. 2957360
    User and Transaction
    Client.............. 210
    User................ 937048
    Language Key........ "E"
    Transaction......... " "
    Transactions ID..... "68211f907e6911ddbfef005056833439"
    Program............. "SAPLHRXSS_PER_MAC"
    Screen.............. "SAPMSSY1 3004"
    Screen Line......... 2
    Information on caller of Remote Function Call (RFC):
    System.............. "########"
    Database Release.... 645
    Kernel Release...... 645
    Connection Type..... "E" (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
    Call Type........... "synchron and non-transactional (emode 0, imode 0)"
    Inbound TID.........." "
    Inbound Queue Name..." "
    Outbound TID........." "
    Outbound Queue Name.." "
    Client.............. "###"
    User................ "############"
    Transaction......... " "
    Call Program........." "
    Function Module..... "HRXSS_PER_CLEANUP"
    Call Destination.... "<unknown>"
    Source Server....... "ERPDEV04"
    Source IP Address... "10.88.1.9"
    Additional information on RFC logon:
    Trusted Relationship " "
    Logon Return Code... 0
    Trusted Return Code. 0
    Note: For releases < 4.0, information on the RFC caller are often
    only partially available.
    Information on where terminated
    Termination occurred in the ABAP program "SAPLHRXSS_PER_MAC" - in
    "HRXSS_PER_CLEANUP".
    The main program was "SAPMSSY1 ".
    In the source code you have the termination point in line 13
    of the (Include) program "LHRXSS_PER_MACU04".
    The termination is caused because exception "CX_SY_REF_IS_INITIAL" occurred in
    procedure "HRXSS_PER_CLEANUP" "(FUNCTION)", but it was neither handled locally
    nor declared
    in the RAISING clause of its signature.
    The procedure is in program "SAPLHRXSS_PER_MAC "; its source code begins in
    line
    1 of the (Include program "LHRXSS_PER_MACU04 ".
    Source Code Extract
    Line
    SourceCde
    1
    FUNCTION hrxss_per_cleanup.
    2
    3
    ""Local interface:
    4
    *"  EXPORTING
    5
    *"     VALUE(MESSAGES) TYPE  BAPIRETTAB
    6
    7
    8
    CALL METHOD mac_adapter->cleanup
    9
       IMPORTING
    10
         messages = messages.
    11
    12
    TRY.
    >>>>>
    CALL METHOD xss_adapter->cleanup
    14
    15
    CATCH CX_HRPA_VIOLATED_ASSERTION .
    16
    ENDTRY.
    17
    18
    ENDFUNCTION.
    Contents of system fields
    Name
    Val.
    SY-SUBRC
    0
    SY-INDEX
    2
    SY-TABIX
    0
    SY-DBCNT
    0
    SY-FDPOS
    0
    SY-LSIND
    0
    SY-PAGNO
    0
    SY-LINNO
    1
    SY-COLNO
    1
    SY-PFKEY
    SY-UCOMM
    SY-TITLE
    CPIC and RFC Control
    SY-MSGTY
    SY-MSGID
    SY-MSGNO
    000
    SY-MSGV1
    SY-MSGV2
    SY-MSGV3
    SY-MSGV4
    SY-MODNO
    0
    SY-DATUM
    20080909
    SY-UZEIT
    081916
    SY-XPROG
    SAPLHRXSS_PER_MAC
    SY-XFORM
    HRXSS_PER_CLEANUP
    Active Calls/Events
    No.   Ty.          Program                             Include                             Line
    Name
    4 FUNCTION     SAPLHRXSS_PER_MAC                   LHRXSS_PER_MACU04                      13
    HRXSS_PER_CLEANUP
    3 FORM         SAPLHRXSS_PER_MAC                   LHRXSS_PER_MACU04                       1
    HRXSS_PER_CLEANUP
    2 FORM         SAPMSSY1                            SAPMSSY1                               85
    REMOTE_FUNCTION_CALL
    1 MODULE (PBO) SAPMSSY1                            SAPMSSY1                               30
    %_RFC_START
    Chosen variables
    Name
    Val.
    No.       4 Ty.          FUNCTION
    Name  HRXSS_PER_CLEANUP
    MESSAGES
    Table[initial]
    %_DUMMY$$
    2222
    0000
    0000
    0000
    No.       3 Ty.          FORM
    Name  HRXSS_PER_CLEANUP
    SYST-REPID
    SAPLHRXSS_PER_MAC
    5454455555545544422222222222222222222222
    310C82833F052FD1300000000000000000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    %_%_MESSAGES
    Table[initial]
    No.       2 Ty.          FORM
    Name  REMOTE_FUNCTION_CALL
    %_DUMMY$$
    2222
    0000
    0000
    0000
    SY-REPID
    SAPMSSY1
    5454555322222222222222222222222222222222
    310D339100000000000000000000000000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    SYST-REPID
    SAPMSSY1
    5454555322222222222222222222222222222222
    310D339100000000000000000000000000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    HEADER
    000000000000
    000000000000
    TYPE
    3
    0000
    3000
    SY-XPROG
    SAPLHRXSS_PER_MAC
    5454455555545544422222222222222222222222
    310C82833F052FD1300000000000000000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    RC
    0
    0000
    0000
    SY-XFORM
    HRXSS_PER_CLEANUP
    455555545544444552222222222222
    82833F052F3C51E500000000000000
    000000000000000000000000000000
    000000000000000000000000000000
    %_SPACE
    2
    0
    0
    0
    No.       1 Ty.          MODULE (PBO)
    Name  %_RFC_START
    %_PRINT
    000                                                                                0###
    2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    RFCTYPE_INTERNAL
    3
    0000
    3000
    Internal notes
    The termination was triggered in function "method_call_iref"
    of the SAP kernel, in line 2207 of the module
    "//bas/700_REL/src/krn/runt/abmethod.c#8".
    The internal operation just processed is "METH".
    Internal mode was started at 20080909081916.
    Active Calls in SAP Kernel
    Lines of C Stack in Kernel (Structure Differs on Each Platform)
    SAP (R) - R/3(TM) Callstack, Version 1.0
    Copyright (C) SAP AG. All rights reserved.
    Callstack without Exception:
    App       : disp+work.EXE (pid=3864)
    When      : 9/9/2008 8:19:16.162
    Threads   : 2
    Computer Name       : ERPDEV01
    User Name           : SAPServiceDE1
    Number of Processors: 4
    Processor Type: AMD64 Family 15 Model 65 Stepping 2
    Windows Version     : 5.2 Current Build: 3790
    State Dump for Thread Id d90
    FramePtr         ReturnAd         Param#1          Function Name
    0000000007d1bb20 0000000077d704bf 000000003879a800 ntdll!ZwWaitForSingleObject
    0000000007d1bbc0 0000000001722981 0000000000000180 kernel32!WaitForSingleObjectEx
    0000000007d1be10 00000000006110c5 0000000000000001 disp+work!NTDebugProcess [ntstcdbg.c (501)]
    0000000007d1be40 0000000000af8e9c 0000000000000001 disp+work!CTrcStack [dptstack.c (182)]
    0000000007d1be90 0000000000afe0c0 0000000000000001 disp+work!rabax_CStackSave [abrabax.c (7091)]
    0000000007d1c870 000000000081768a 0000000001adae28 disp+work!ab_rabax [abrabax.c (1231)]
    0000000007d1c8d0 0000000000830b12 0000000000000000 disp+work!method_call_iref [abmethod.c (2215)]
    0000000007d1ca50 0000000000a0bac7 0000000000000008 disp+work!ab_extri [abextri.c (554)]
    0000000007d1caa0 0000000000ac830c 0000000000000008 disp+work!ab_xevent [abrunt1.c (281)]
    0000000007d1cb30 000000000066f348 0000000000000008 disp+work!ab_dstep [abdynpro.c (492)]
    0000000007d1ccb0 0000000000672f1d 000007fe571fc890 disp+work!dynpmcal [dymainstp.c (2403)]
    0000000007d1cd40 000000000067291a 000007fe571414a0 disp+work!dynppbo0 [dymainstp.c (543)]
    0000000007d1cdf0 00000000006320d5 0000000000000000 disp+work!dynprctl [dymainstp.c (360)]
    0000000007d1fc30 00000000004d7393 0000000000000003 disp+work!dynpen00 [dymain.c (1629)]
    0000000007d1feb0 000000000042d5a6 000000000a595080 disp+work!TskhLoop [thxxhead.c (4470)]
    0000000007d1fee0 000000000040108d ffffffff00000003 disp+work!DpMain [dpxxdisp.c (1121)]
    0000000007d1ff10 00000000019c7dd1 0000000000000000 disp+work!nlsui_main [thxxanf.c (84)]
    0000000007d1ff70 0000000077d5964c 0000000000000000 disp+work!wmainCRTStartup [crtexe.c (498)]
    0000000007d1ffa0 0000000000000000 00000000019c7c60 kernel32!BaseProcessStart
    State Dump for Thread Id 1e0c
    FramePtr         ReturnAd         Param#1          Function Name
    000000000edffe40 0000000077d5f691 0000000007d86460 ntdll!NtFsControlFile
    000000000edffeb0 00000000018ae00f 0000000000000000 kernel32!ConnectNamedPipe
    000000000edfff40 000007ff7fc411c4 0000000000000000 disp+work!SigIMsgFunc [signt.c (679)]
    000000000edfff70 0000000077d6b6da 0000000077d6b6a0 msvcrt!endthreadex
    000000000edfffa0 0000000000000000 0000000000000000 kernel32!BaseThreadStart
    List of ABAP programs affected
    Index
    Typ
    Program
    Group
    Date
    Time
    Size
    Lang.
    0
    Prg
    SAPMSSY1
    0
    04/11/2005
    09:27:15
    22528
    E
    1
    Prg
    SAPLSYST
    1
    02/13/2005
    17:31:56
    35840
    E
    2
    Prg
    SAPLHRXSS_PER_MAC
    2
    07/03/2008
    12:14:05
    58368
    E
    3
    Prg
    CX_SY_REF_IS_INITIAL==========CP
    3
    07/05/2005
    13:10:16
    10240
    E
    4
    Typ
    SCX_SRCPOS
    0
    05/18/2004
    14:07:11
    2048
    5
    Prg
    CX_DYNAMIC_CHECK==============CP
    5
    07/05/2005
    13:10:16
    10240
    E
    6
    Prg
    CX_ROOT=======================CP
    6
    02/06/2008
    15:43:48
    11264
    E
    7
    Prg
    CX_NO_CHECK===================CP
    7
    07/05/2005
    13:10:16
    10240
    E
    8
    Prg
    CX_SY_NO_HANDLER==============CP
    8
    07/05/2005
    13:10:16
    10240
    E
    9
    Typ
    SYST
    0
    09/09/2004
    14:18:12
    31744
    Directory of Application Tables
    Name                                     Date       Time       Lngth
    Val.
    Program  SAPMSSY1
    SYST                                       /  /       :  :     00004612
    \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\x0001\0\0
    ABAP Control Blocks (CONT)
    Index
    Name
    Fl
    PAR0
    PAR1
    PAR2
    PAR3
    PAR4
    PAR5
    PAR6
    Source Code
    Line
    243
    FUNC
    03
    001F
    LHRXSS_PER_MACU03
    1
    244
    PAR2
    02
    0000
    001F
    C000
    LHRXSS_PER_MACU03
    1
    246
    FUNC
    13
    0003
    LHRXSS_PER_MACU03
    1
    247
    PAR2
    01
    0000
    0014
    C001
    LHRXSS_PER_MACU03
    1
    249
    FUNC
    FF
    0000
    LHRXSS_PER_MACU03
    1
    250
    ENDF
    00
    0000
    LHRXSS_PER_MACU03
    1
    251
    00
    0000
    LHRXSS_PER_MACU03
    1
    252
    STCK
    02
    C001
    LHRXSS_PER_MACU03
    1
    253
    CPOP
    00
    0000
    LHRXSS_PER_MACU03
    1
    254
    00
    0000
    LHRXSS_PER_MACU03
    1
    255
    FUNP
    3E
    0000
    0014
    8000
    0000
    8000
    0000
    0000
    LHRXSS_PER_MACU04
    1
    259
    FUNP
    80
    0000
    0000
    0000
    0000
    0000
    0000
    0000
    LHRXSS_PER_MACU04
    1
    >>>>>
    METH
    03
    0000
    0000
    8006
    0000
    0000
    0000
    0000
    LHRXSS_PER_MACU04
    13
    267
    PAR2
    00
    0000
    0001
    0000
    LHRXSS_PER_MACU04
    13
    269
    FUNE
    00
    0000
    LHRXSS_PER_MACU04
    18
    270
    00
    0000
    LHRXSS_PER_MACU04
    18
    271
    PERP
    00
    0000
    LHRXSS_PER_MACU04
    1
    272
    FUNC
    03
    E844
    LHRXSS_PER_MACU04
    1
    273
    FUNC
    03
    0020
    LHRXSS_PER_MACU04
    1
    274
    FUNC
    13
    0003
    LHRXSS_PER_MACU04
    1
    Second Dump
    Runtime Errors         DYNPRO_SEND_IN_BACKGROUND
    Date and Time          09/09/2008 08:19:15
    Short text
    Screen output without connection to user.
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLSTRD" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
    Error analysis
    During background processing, the system attempted to send a
    screen to a user.
    Current screen: "SAPLSTRD " 0351.
    How to correct the error
    If the error occurred in your own ABAP program or in an SAP
    program you modified, try to remove the error.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "DYNPRO_SEND_IN_BACKGROUND" " "
    "SAPLSTRD" or " "
    "SYSTEM-EXIT"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
    To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
    Display the system log by calling transaction SM21.
    Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
    In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    System environment
    SAP-Release 700
    Application server... "ERPDEV01"
    Network address...... "10.88.1.6"
    Operating system..... "Windows NT"
    Release.............. "5.2"
    Hardware type........ "4x AMD64 Level"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 1
    Shortdump setting.... "full"
    Database server... "ERPDEV01"
    Database type..... "MSSQL"
    Database name..... "DE1"
    Database user ID.. "de1"
    Char.set.... "C"
    SAP kernel....... 700
    created (date)... "Oct 23 2007 00:33:51"
    create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
    Database version. "SQL_Server_8.00 "
    Patch level. 133
    Patch text.. " "
    Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
    SAP database version. 700
    Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
    NT 6.0"
    Memory consumption
    Roll.... 16192
    EM...... 12569520
    Heap.... 0
    Page.... 131072
    MM Used. 8307376
    MM Free. 4259072
    User and Transaction
    Client.............. 210
    User................ 937048
    Language Key........ "E"
    Transaction......... " "
    Transactions ID..... "68211f907e6911ddbfef005056833439"
    Program............. "SAPLSTRD"
    Screen.............. "SAPLSTRD 0351"
    Screen Line......... 0
    Information on caller of Remote Function Call (RFC):
    System.............. "########"
    Database Release.... 645
    Kernel Release...... 700
    Connection Type..... "E" (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
    Call Type........... "synchron and non-transactional (emode 0, imode 0)"
    Inbound TID.........." "
    Inbound Queue Name..." "
    Outbound TID........." "
    Outbound Queue Nam

    Hello Abhiram,
    Please i request weather you have assign 0105 - Communication infotype to ESSuser and
    check the following JCos has been configured.
    SAP_R3_Financials
    SAP_R3_Financials_Metadata
    SAP_R3_HumanResources
    SAP_R3_HumanResources_MetaData
    SAP_R3_SelfServiceGenerics
    SAP_R3_SelfServiceGenerics_MetaData
    SAP_R3_Travel
    SAP_R3_Travel_MetaData
    SAP_R3_SelfServiceGenerics_MetaDataFIN
    SAP_R3_SelfServiceGenericsFIN
    let me know this
    points if problem solved
    please close thread if problem solved
    thanksyou,
    regards
    Vijai

  • Screen output without connection to user - Work flow

    Hi,
    i  have created a workflow, it has a task which refers to a method which call a BDC in N mode, but workitem is not generating, in event trace showing RFC status 'Screen output without connection to user'.
    Same time i observed in ST22 for any dumps, as it is giving this error 'DYNPRO_SEND_IN_BACKGROUND'.
    Please suggest how to solve. Thanks in advance.
    BR,
    Rajani

    Hi  Vijay shah /Rick Bakker ,
    As i am on leave from last 2 days, sorry for delay in response.
    As the work flow tasks and what ever the methods i developed are working as per requried.
    But  after each step by step analysis i founn every usefull information regarding the background type activity options.
    Solution :
    In background type activity step, in details tab  we have option of ->Advance With Immediate Dialog flag is set to X, due to this system checking for user interaction.
    Because of this its creating problem.  After unmarking the falg i am able to execute the task in background successfully
    with out any problem.
    Once again sorry for delay in reponse 
    BR,
    Rajani

  • Screen output without connection to user., error key: RFC_ERROR_SYSTEM_FAIL

    Good Afternoon,
    I have the following issue in the moment of update the data in the Employee Self-Service -
    >Personal Information----->Addresses, with a user at the moment of save the data the portal display the following message of dump
    A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
    Please contact your system administrator.
      Screen output without connection to user., error key: RFC_ERROR_SYSTEM_FAILURE   
      Screen output without connection to user., error key: RFC_ERROR_SYSTEM_FAILURE:com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Screen output without connection to user., error key: RFC_ERROR_SYSTEM_FAILURE
         at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
         at com.sap.xss.per.fc.persinfo.FcPersInfo.save(FcPersInfo.java:440)
         at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfo.save(InternalFcPersInfo.java:770)
         at com.sap.xss.per.fc.persinfo.FcPersInfoInterface.save(FcPersInfoInterface.java:186)
         at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfoInterface.save(InternalFcPersInfoInterface.java:275)
         at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfoInterface$External.save(InternalFcPersInfoInterface.java:435)
         at com.sap.xss.per.vc.reviewnavi.VcPersInfoReviewNavi.onEvent(VcPersInfoReviewNavi.java:213)
         at com.sap.xss.per.vc.reviewnavi.wdp.InternalVcPersInfoReviewNavi.onEvent(InternalVcPersInfoReviewNavi.java:171)
         at com.sap.xss.per.vc.reviewnavi.VcPersInfoReviewNaviInterface.onEvent(VcPersInfoReviewNaviInterface.java:115)
         at com.sap.xss.per.vc.reviewnavi.wdp.InternalVcPersInfoReviewNaviInterface.onEvent(InternalVcPersInfoReviewNaviInterface.java:124)
         at com.sap.xss.per.vc.reviewnavi.wdp.InternalVcPersInfoReviewNaviInterface$External.onEvent(InternalVcPersInfoReviewNaviInterface.java:200)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:534)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.access$600(FPMComponent.java:78)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.raiseSaveEvent(FPMComponent.java:952)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.raiseSaveEvent(FPMComponent.java:1115)
         at com.sap.xss.per.vc.reviewnavi.VcPersInfoReviewNavi.next(VcPersInfoReviewNavi.java:227)
         at com.sap.xss.per.vc.reviewnavi.wdp.InternalVcPersInfoReviewNavi.next(InternalVcPersInfoReviewNavi.java:175)
         at com.sap.xss.per.vc.reviewnavi.ReviewNaviView.onActionNext(ReviewNaviView.java:153)
         at com.sap.xss.per.vc.reviewnavi.wdp.InternalReviewNaviView.wdInvokeEventHandler(InternalReviewNaviView.java:173)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
         at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:319)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
         at com.sap.tc.webdynpro.portal.pb.impl.localwd.LocalApplicationProxy.sendDataAndProcessAction(LocalApplicationProxy.java:77)
         at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1299)
         at com.sap.portal.pb.PageBuilder.SendDataAndProcessAction(PageBuilder.java:326)
         at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:868)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:319)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Caused by: com.sap.aii.proxy.framework.core.BaseProxyException: Screen output without connection to user., error key: RFC_ERROR_SYSTEM_FAILURE
         at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
         at com.sap.xss.per.model.mac.HRXSS_PER_MAC.hrxss_Per_Save(HRXSS_PER_MAC.java:478)
         at com.sap.xss.per.model.mac.Hrxss_Per_Save_Input.doExecute(Hrxss_Per_Save_Input.java:137)
         at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
         ... 64 more
    Regards,

    Hi Vijay,
    I have the following configutation
    32     0002              B1
    32     0006     1     A1
    32     0021     1     B2
    32     0021     2     A6
    10     0002              B1
    10     0006     1     A1
    10     0021     1     B2
    10     0021     2     A6,
    However this employee is the single that display is error.
    I check the data of this employee, compare it and this well.
    Regards,

Maybe you are looking for

  • Aspect ratio is wrong ! please help!

    Ive just made an animation in after effects. the comp is set to pal dv wide screen 1.46 when I bring this into fcp its in 4x3 I ticked the anamorphic box but nothing has append! what am I doing wrong? thanks for any help

  • HT201272 purchased app is missing

    My app is completely missing from my purchased apps tab. I have a receipt from where I purchased it. How can I get it redownloaded on my phone. The app is Keeper back up, I paid $9.99 for it and it is gone.  Any ideas on how to get it back.

  • SD Debit note process

    Hi Gurus, My Issue is User has created a debit note and created billing, At Sales Order level he has maintained plant so by default the same plant has to be trigger in billing but in billing plant is missing, I have checked in copy controls also ever

  • CS4 - Dual Monitor Setup - Files open on wrong screen + Preview Adjustment layers

    I have various workstations running Mac OS 10.5.8 three run PS CS3, and one runs CS4 In CS4 files always open on the monitor I have allocated for my palattes.  Before CS4, Photoshop would open files on the monitor that my last filed was opened on.  T

  • Search Genre by Release Date?

    Is there a way I can search by release date in iTunes store? For example, if I wanted to find all Soul/R&B released in the last week, does iTunes store allow that kind of search?