Connector to SAP AII scanario

My scenario:
Biztalk RFID ->Connector>XI--> SAP AII
We are not considering between Biztalk RFID to Connector.We are bothered about Connector to SAP AII.Now our people say that,They dont want a folder concept where they will drop their XML content into a folder from where XI will pick it up throught File Adapter.
they want it to get picked up by XI directly from Connector.How is that can be done.Does anyone have any Idea or any suggestion.Plz guide me.
how can we achieve....
Message was edited by:
Raghavesh Reddy

Hi Raghvesh,
here is the imp book link for you
http://www.patrick-theobald.de/postnuke/html/modules.php?op=modload&name=News&file=article&sid=12
here is the another book
Oleg Ovanesyan's book on amazon.com
have a look on this
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/92333e6b-0b01-0010-9cbf-fecd62d6c895
http://www.sap-press.com/product.cfm?account=&product=H1936
****PS: Reward points if use ful.****
Regards,
Sumit Gupta

Similar Messages

SAP AII (Auto-ID Infrastructure) to BizTalk RFID scenario

Hi Everyone,
did some one work on this type of project ....
This project is to develop a connector between SAP AII (Auto-ID Infrastructure) and BizTalk RFID for handling RFID related activities.
Quick response would be appreaciated.....
Cheers,
Raghavesh

Hi Raghavesh,
If you want to use a Connector to communicate between Biztalk and SAP AII..you can use .Net connector available.
The other way is SAP AII uses XI for Communication...so you can use webservices between Biztalk and XI. The below document should be helpful
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7521a237-0701-0010-499b-b3285b789c0d
Use SOAP adapter for BIZTALK .
Use plainHttp adapter for XI .
Regards
Satish

Relations between SAP AII, ONS, PML and Savant???

The EPCGlobal provides a standard EPC-Network containing the EPC-Code and infrastruture-components like the RFID-Tag and -Reader, the ONS-Server, the PML-Server and a RFID-Middleware called Savant.
On the one hand I found a couple of articles where the SAP Auto-Id Infrastructure (SAP AII) is said to be a "RFID-Middleware". On the other hand I found a lot of presentation sheets with illustrations of the SAP AII architecture where the SAP AII is connected to Savant by the device controller and to the ONS/PML Servers by SAP XI.
Can anybody inform me about the relationship between the SAP AII, the ONS/PML Servers and Savant? Is the SAP AII a substitute for Savant? Which component of the SAP Auto-ID Infrastructure asks the ONS-Server for the URL to a PML Server where further information about an object which is identified by the EPC code are located? Are product information stored on a PML-Server anyway? Or are information only stored in the ERP-Backendsystem?
Thank you for your reply.

hi.Dirk
1)SAP AII is a "RFID-Middleware", but mostly it is a RFID Middleware for business process. It focus on business more than RFID readers. So it is not a RFID Reader manager(Device connector, or something like that)
2)Savant is a specification or a product release by EPC global. You can download the savant specification on EPC global .
http://www.epcglobalinc.org/about/AutoID_Archive/documents/6_auto_id_savant-1_0.pdf
Savant is also a product, many company IBM, SUN make their RFID Middleware follow the EPC savant specification. And also EPC has a RFID-Middleware call savant.
Savant is design to manager RFID readers, filter RFID tag information, and log events.
3)The relation between AII and savant is they are on the diferrent layer of RFID Middleware, they should be work together.
4)ONS is another EPC RFID issue, it is design to record RFID tag data. On EPC's idea, all the data about RFID tag should be record on ONS server. I do not know if it will come true in the future.
5) On SAP solution, Most of the data is still stored in SAP backend-system(R3,SCM,BW......), and information about RFID, e.g. RFID tag, RFID device, tag event is stored in SAP AII. And you can use BW in AII, if mass data is generated.
6) PML is just a RFID XML.
Regards
Sheng

Com.sap.aii.af.ra.ms.api.DuplicateMessageException - Msg Successful

Hi all,
We have a scenario where JDBC sender adapter polls - DB2 data base.
Picks up the records. Updates the records.Messages are sent out.
Everything is fine. The message is sent to IE and then to the receiver.
But I see a com.sap.aii.af.ra.ms.api.DuplicateMessageException in the audit log.
2008-11-21 00:00:26 Error Putting message into send queue failed, due to: com.sap.aii.af.ra.ms.api.DuplicateMessageException:
Message ID 56149940-20b1-472f-0905-893a906a65cf(OUTBOUND) already exists in database:
com.sap.sql.DuplicateKeyException: DB2 SQL error: SQLCODE: -803, SQLSTATE: 23505, SQLERRMC: #XIR1N5J;000000030F.
2008-11-21 00:00:26 Error Returning to application. Exception: com.sap.aii.af.ra.ms.api.DuplicateMessageException:
Message ID 56149940-20b1-472f-0905-893a906a65cf(OUTBOUND) already exists in database:
com.sap.sql.DuplicateKeyException: DB2 SQL error: SQLCODE: -803, SQLSTATE: 23505, SQLERRMC: #XIR1N5J;000000030F

HI
I think there is some issue with your query. Its either updating the same field or database got some error.
Check notes 962578 & 831162
Thanks
Gaurav

SAP Java Connectivity Builder -NoClassDefFoundError com.sap.aii...Reference

Hi there,
I'm trying to generate Java Proxies for SAPJCO using the SAP Java Connectivity Builder (JCB). I got it from the NetWeaver 6.20 Release. The tool installs and runs properly but after putting in the connection properties and klicking "next", the application hangs. When activating System output, I get the error shown below.
I already tried to put all jar files contained in the C:\JBuilder5\lib\ext directiry into the classpath (but none of them contains the class mentioned).
Which is the right (standalone) tool for generating Java Proxies for a standalone Java application?
If it is JCB, is there a bug on the version I use (NetWeaver Release 6.20)?
Any help would be apreciated.
C:\JBuilder5>java -Dlog.handler.FileLog=FileHandler,log.txt -Dlog.logger.com=ALL,FileLog -cp lib/ext/aii_basis.jar;lib/e
xt/aii_ifr_core.jar;lib/ext/aii_ifr_jbtool.jar;lib/ext/aii_lcraccess.jar;lib/ext/aii_msg_runtime.jar;lib/ext/aii_proxy_g
en.jar;lib/ext/aii_proxy_rt.jar;lib/ext/aii_util.jar;lib/ext/aii_util_log.jar;lib/ext/lcrclient.jar;lib/ext/logging.jar;
lib/ext/SapIdeHelp.jar;lib/ext/SapIdeJBUtil.jar;lib/ext/SapIdeJspInsight.jar;lib/ext/SapIdeTaglibReflection11.jar;lib/ex
t/SapIdeTracing.jar;lib/ext/SapIdeUtil.jar;lib/ext/SAPJ2EEEngineJBuilderPlugin.jar;lib/ext/sapjco.jar;lib/ext/SAPmdi.jar
;lib/ext/servlet.jar;lib/ext/tc_sec_core.jar com.sap.aii.ifr.tool.jbuilder.JBuilderTool
#0 12:35:37 [main] DEBUG com.sap.aii.util.misc.api.AIIProperties: Initial AIIProperties
 com.sap.aii.client = true
#1 12:35:37 [main] FINE com.sap.aii.util.misc.api.AIIProperties: changed Property "com.sap.aii.standalone" from "null" t
o "true"
#2 12:35:37 [main] FINE com.sap.aii.util.misc.api.AIIProperties: changed Property "com.sap.aii.xml.parserFactory" from "
null" to "com.inqmy.lib.jaxp.SAXParserFactoryImpl"
#3 12:35:37 [main] FINE com.sap.aii.util.misc.api.AIIProperties: changed Property "com.sap.aii.xml.transformerFactory" f
rom "null" to "com.inqmy.lib.jaxp.TransformerFactoryImpl"
#4 12:35:46 [AWT-EventQueue-0] DEBUG com.sap.aii.ifr.upload.client.SAPNavigationPane: New file is C:\Documents and Setti
ngs\kalkoo1\Desktop\t.jar
#5 12:36:08 [AWT-EventQueue-0] FINER com.sap.aii.ifr.upload.client.R3LogonScreen: setting for Client : 010
#6 12:36:08 [AWT-EventQueue-0] FINER com.sap.aii.ifr.upload.client.R3LogonScreen: setting for Logon Name : kalkoo1
#7 12:36:08 [AWT-EventQueue-0] FINER com.sap.aii.ifr.upload.client.R3LogonScreen: setting for Password : #########
#8 12:36:08 [AWT-EventQueue-0] FINER com.sap.aii.ifr.upload.client.R3LogonScreen: setting for Language : EN
#9 12:36:08 [AWT-EventQueue-0] FINER com.sap.aii.ifr.upload.client.R3LogonScreen: setting for Host name: bgstsapedai01.s
t.behr.de
#10 12:36:08 [AWT-EventQueue-0] FINER com.sap.aii.ifr.upload.client.R3LogonScreen: setting for System number : 20
#11 12:36:08 [AWT-EventQueue-0] INFO com.sap.aii.ifr.upload.client.R3LogonScreen: trying to establish connection
#12 12:36:08 [AWT-EventQueue-0] FINEST com.sap.aii.ifr.util.IdentityCheck: Looking up identity
#13 12:36:08 [AWT-EventQueue-0] DEBUG com.sap.aii.ifr.util.IdentityCheck: Results of identity check: isIFRServer: false;
isIFRRMIClient: false; isStandaloneIFR: true
#14 12:36:08 [AWT-EventQueue-0] FINEST com.sap.aii.ifr.util.IdentityCheck: Checking IdentityCheck.isIFRServer. Result: f
alse
#15 12:36:08 [AWT-EventQueue-0] INFO com.sap.aii.ifr.upload.sap.SAPConnection: connecting to system 20 on bgstsapedai01.
st.behr.de via JCo
#16 12:36:09 [AWT-EventQueue-0] DEBUG com.sap.aii.ifr.upload.sap.SAPUploadSource: init MDI to System bgstsapedai01.st.be
hr.de (system=20, client=010) (BasisRelease: 620)
#17 12:36:09 [AWT-EventQueue-0] DEBUG com.sap.aii.ifr.upload.UploadBuffer: new UploadBuffer
Exception in thread "AWT-EventQueue-0" java.lang.NoClassDefFoundError: com/sap/aii/ifr/client/editor/Reference
 at java.lang.Class.getDeclaredMethods0(Native Method)
 at java.lang.Class.privateGetDeclaredMethods(Unknown Source)
 at java.lang.Class.getDeclaredMethod(Unknown Source)
 at java.awt.Component.isCoalesceEventsOverriden(Unknown Source)
 at java.awt.Component.access$100(Unknown Source)
 at java.awt.Component$2.run(Unknown Source)
 at java.awt.Component$2.run(Unknown Source)
 at java.security.AccessController.doPrivileged(Native Method)
 at java.awt.Component.checkCoalescing(Unknown Source)
 at java.awt.Component.<init>(Unknown Source)
 at java.awt.Container.<init>(Unknown Source)
 at javax.swing.JComponent.<init>(Unknown Source)
 at javax.swing.JTree.<init>(Unknown Source)
 at javax.swing.JTree.<init>(Unknown Source)
 at com.sap.aii.ifr.navigation.IFRJTree.<init>(IFRJTree.java:84)
 at com.sap.aii.ifr.navigation.IFRTreePane.buildPane(IFRTreePane.java:123)
 at com.sap.aii.ifr.navigation.IFRTreePane.<init>(IFRTreePane.java:33)
 at com.sap.aii.ifr.upload.client.SAPNavigationPane.<init>(SAPNavigationPane.java:43)
 at com.sap.aii.ifr.upload.client.SAPBrowser.setIsConnected(SAPBrowser.java:252)
 at com.sap.aii.ifr.upload.client.SAPBrowser$ConnectAction.actionPerformed(SAPBrowser.java:594)
 at com.sap.aii.ifr.upload.client.SAPBrowser$NextAction.actionPerformed(SAPBrowser.java:536)
 at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
 at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
 at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
 at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
 at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
 at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
 at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
 at java.awt.Component.processMouseEvent(Unknown Source)
 at javax.swing.JComponent.processMouseEvent(Unknown Source)
 at java.awt.Component.processEvent(Unknown Source)
 at java.awt.Container.processEvent(Unknown Source)
 at java.awt.Component.dispatchEventImpl(Unknown Source)
 at java.awt.Container.dispatchEventImpl(Unknown Source)
 at java.awt.Component.dispatchEvent(Unknown Source)
 at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
 at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
 at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
 at java.awt.Container.dispatchEventImpl(Unknown Source)
 at java.awt.Window.dispatchEventImpl(Unknown Source)
 at java.awt.Component.dispatchEvent(Unknown Source)
 at java.awt.EventQueue.dispatchEvent(Unknown Source)
 at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
 at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
 at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
 at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
 at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
 at java.awt.EventDispatchThread.run(Unknown Source)

Hi,
>> Error :- java.lang.NoClassDefFoundError: com/sap/aii/security/proxy/KeystoreHelp
1) Can you check the class path you have mentioned is correctly
2) Setting of the Java in your system ( Desk top /Lap top ) check the Proxy settings
3) Re start the J2EE engine in the server
Regards
Agasthuri Doss

Call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException

hello
I am running an interface RFC2WS sync and recieve this message in the RFC. the message does not get out of the XI and rich the target (WS).
the XI been upgraded lately, and I think this might be the cuase to the problem, becuase the interface been worked before, and still working in PROD environment as is.
what could be the problem and how can I start investigate it to find the problem?
this is what the SAP recieves
call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException
Thanks
Kfir

Hi Kfir,
just check in RWB, in component monitoring, the status of integration server and adapter engine.......if it is red, then ask your basis guys to remove that error................just check your comm channels, i think your comm channels are in error, if they are just edit them, save and activate them again..........i think then your this issue will be resolved.'
Regards,
Rajeev Gupta

"call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryExceptio

Hello XI guru,
I am configuring RFC to File scneario where i am using BAPI as Source. When i run this BAPI in se37 it gives me short dump stating "call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException:
Please help.
Also I want to know is it necessary to write wrapper for BAPI before configuring. This bapi list all orders created in SCM system.
awaiting ur advises and help
Thanx
Anu

Hello guys,
I am sorry but kind of confuse, please be with me.
I have RFC with following structure:
'Z_BAPI_MOSRVAPS_GETLIST2'
importing parameters
 LOGICAL_SYSTEM = T_LOGICAL_SYSTEM
 START_TIME = T_START_TIME
TABLES
 PRODUCT_SELECTION = T_PRODUCT_SELECTION
 LOCATION_SELECTION = T_LOCATION_SELECTION
 LOCTYPE_SELECTION = T_LOCTYPE_SELECTION
 ORDER_HEADS = T_ORDER_HEADS
 OUTPUT_NODES = T_OUTPUT_NODES.
I put values in logical system/start_time/
product_selection/location_selection/loctype_selection
based on these values order_heads and output_nodes is populated. I want value of these to tables to be sent as file.
Data structure for file is as follows
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:ORDER_MT xmlns:ns0="uri:scm:sql:transaction">
- <ORDER_HEADS>
- <ITEM>
<ORDER_NUMBER />
<ORDER_TYPE />
</ITEM>
</ORDER_HEADS>
- <OUTPUT_NODES>
- <ITEM>
<MASTER_PRODUCT />
<MASTER_PLANT />
</ITEM>
</OUTPUT_NODES>
</ns0:ORDER_MT>
But the payload has value
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:ORDER_MT xmlns:ns0="uri:scm:sql:transaction">
remaining is not seen in sxmb_moni and payload cannot be read error is given.
file structure is dummy structure, please tell me know if it is right or i need to change.
Thanx
Anu

File to RFC - error while processing message to remote system:com.sap.aii.

Hi
i m working on File to RFC scenario. the records are getting displayed in sender CC and receiver CC. But in receiver CC i m also getting the following error:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
Error in processing caused by: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
It was working fine few hours earlier but showing this error now. i was giving a SUBMIT program , but stopped that now.
But still facing the same problem. and in SXMB_MONI its showing recorded for Outbound processing.
could anyone help.

Hi
I am Facing Following Error When I am trying to call SAP Screen through JCO.jar
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user
Please Guide Whethere it is possible to call SAP screen Through JCO.jar ot NOT
Please HELP if it is possible to Call SAP screen through JCO.jar with step and Code
Thanks
Vivek

Could not process due to error: com.sap.aii.adapter.file.ftp.FTPEx: 550

Hi Experts,
We have many File to EDI scenarios wherein XI System pick up the XML and sent to customers via EDI. Recently we faced a problem so created a Back-up System (Production copy) and tested successfully. After sometime the messages were routed to this back-up system and when we notice it and then stopped the back-up system. All the messages that were routed to back-up system, we try to send the same messages from the actually Production system to our customers. Now the problem is XI system (Production system) is unable to pick these files and I check the communication monitoring and encountered the below error message.
Could not process due to error: com.sap.aii.adapter.file.ftp.FTPEx: 550.550
Can anyone let me know how to fix the issue or what needs to be done?
Your help is highly appreciated.
Regards
Faisal

Hi,
It seems to be problem with permission of files. Please ask your basis to do following:
1. Set the permissions to FTP User you are using as 777 rights(full access to read , write and delete)
2.If you have access to PI server, try to telnet /connect to ftp using command prompt (open ftp .....) the FTP server form there, you should see the same error there , inform this to your network guys.
3.Clear all the files places already in the ftp (take backup) and test afresh after permissions are set by basis team.
Regards
Aashish Sinha

Error message "com.sap.aii.af.ra.ms.api.DeliveryException: "

Hi Team,
Created a simple file2file scenarion successfully. Unable to pick the file from Sender directory to Receiver Directory.
Checked from monitoring the Communication Channel.
Error message shown for sender communication channel as below:
Communication Channel Status   Short Log                                Control Data   Party Service           Adapter Type Direction
sen_cc                 Red ball Processing Errors In the Last 30 Seconds Manually             kanchuf2f_sen_bs   File         Sender
Line 1 / 1
By selecting the sender communication channel "sen_cc", below is the node details given.
Processing Details for Cluster Node Server 0 1_54295
Type
Time Stamp         Message ID                           Explanation
12/3/08 8:20:01 AM 45f841be-a421-43bd-235a-c7ad19b0aec8 Retry interval started. Length: 60.0 seconds
12/3/08 8:20:01 AM 45f841be-a421-43bd-235a-c7ad19b0aec8 Error: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:JCO_COMMUNICATION_FAILURE:
By clicking on the first Message ID, The message says successful upto some point and give error says JCO COMMUNICATION FAILURE and RFC issue.
Below is the information provided in detail.
Audit Log for Message: 45f841be-a421-43bd-235a-c7ad19b0aec8
Time Stamp          Status Description
03.12.2008 08:20:00 Success Channel sen_cc: Send binary file "f:\xi_file\sender\f2fmap.xml". Size 210 with QoS BE
03.12.2008 08:20:00 Success Application attempting to send an XI message synchronously using connection AFW.
03.12.2008 08:20:00 Success Trying to put the message into the call queue.
03.12.2008 08:20:00 Success Message successfully put into the queue.
03.12.2008 08:20:00 Success The message was successfully retrieved from the call queue.
03.12.2008 08:20:00 Success The message status set to DLNG.
03.12.2008 08:20:01 Error Returning synchronous error notification to calling application: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:JCO_COMMUNICATION_FAILURE:.
03.12.2008 08:20:01 Error Transmitting the message using connection http://sitaserv33:8001/sap/xi/engine?type=entry failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:JCO_COMMUNICATION_FAILURE:.
03.12.2008 08:20:01 Error The message status set to FAIL.
03.12.2008 08:20:01 Error Returning to application. Exception: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:JCO_COMMUNICATION_FAILURE:
Page 1 / 2
I think this could be the problem with some basis related settings, I am not sure what exactly the issue with.
Any idea what exactly the error is talking about please do help me in finding the solution to thresolve this error message.
Regards,
Venkat Ramana K

Hi Carlos,
Thank you for the quick information.
Followed all the steps and also basis person from onsite restarted the XI server.
Now, I am able to log onto XI with the login Id but, when I give Tr Code: SXMB_IFR, unable to open the browser that shows Integration Builder.
Getting the error message.
*500   Internal Server Error*
                                                                                *SAP J2EE Engine/7.00*
**Exception**
*An internal error occurred. Contact you XI administrator*
*Unable to read configuration data (ExchangeProfile/aii.properties)*
Error Details, Error History, Build Info, Generic Application Info
Regards,
Venkat Ramana K

SAP R/3 - XI: Commit fault com.sap.aii.af.mp.module.ModuleException

Hi -
We have an integration setup between SAP R/3 4.7C and SAP XI -
It uses background queues - and in our development environment, on the call to XI, we are receiving the error message:
Commit fault com.sap.aii.af.mp.module.ModuleException: call to messaging
The queue then goes into SYSFAIL status.
This is occurring on all of our integrations between R/3 and XI - which has been previously working -
I have been working w/ our Basis guy & he said that all his checks to both systems look ok.
Do you have any pointers on what to look at or check out?
Your help is very appreciated!
Thanks,
Michelle

Hi Michelle,
Please check if the background Xi database to which your transactions are committed is full. In case it is, you would need Basis help to archive them, before you proceed. Please check your dump for the same.
cheers,
Prashanth
P.S Please mark helpful answers.

PI 7.1 and Oracle JDBC driver: missing com.sap.aii.adapter.lib.sda

Hello,
I want to deploy the JDBC driver for Oracle databases as described in OSS 1138877 on a brand-new PI7.1 (SP06 Stack) installation. Unfortunately, I can't find com.sap.aii.adapter.lib.sda on the system, so I can't add the ojdbc14.jar file and deplay it using JSPM.
Where can I get it from?
Thank you and best regards,
Herwig

hey,
The JDBC driver installation is different for PI 7.1.
The dowload/modify/deploy .sap.aii.adapter.lib.sda method was used in the earlier versions.(mentioned in the How to guides)
Look at the SAP documentation below -
http://help.sap.com/saphelp_nwpi71/helpdata/en/cf/128a42f802a01ae10000000a155106/frameset.htm
Arvind R

ERROR: "com.sap.aii.af.ra.ms.api.ConfigException:"

Hi,
I am working on Idoc-xi-File scanerio.
I am facing an Error in TCode: SXMB_MONI
Error is
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.ConfigException: ConfigException in XI protocol handler. Failed to determine a receiver agreement for the given message. Root cause: com.sap.aii.af.service.cpa.impl.exception.CPALookupException: Couldn't retrieve outbound binding for the given P/S/A values: 
Please tell me,
How can solve this problem???
Please Reply soon......
Regards,
Umesh Laxkar

Hi Pooja,
Thanks.......
Now my scanerio is working.
Problem was CACHE Refresh.
This document really helpful.
Thanks again.
Regards,
Umesh Laxkar

Import com.sap.aii.mappingtool.* show error in PI 7.1 adapter module

Hi
Experts,
i have an adapter module for 7.0 and i am trying to replicate the same for PI 7.1 in 7.1 NWDS.
i have made the required changes as mentioned in stefan's blog :/people/stefan.grube/blog/2008/12/11/adjust-your-pi-70-adapter-modules-for-pi-71-in-15-minutes
but import com.sap.aii.mappingtool.tf7.rt.Container; shows error , do we need to inlcude any jar file for this :
i am using this module to rename file name (in case of pick and place scenario forwithot IR configuration)
getMessageProperty and setmessageProperty is getting deprecated.(striked off)
strFileName = msg.getMessageProperty("http://sap.com/xi/XI/System/File","FileName");
Regards,
Srinivas

> strFileName = msg.getMessageProperty("http://sap.com/xi/XI/System/File","FileName");
in PI 7.1 you can use:
strFileName = msg.getMessageProperty(new MessagePropertyKey("FileName","http://sap.com/xi/XI/System/File"));
Note that property name and namspace come in different order. I almost got mad until I noticed
http://help.sap.com/javadocs/pi/SP3/xpi/index.html

RuntimeException in Message-Mapping (com.sap.aii.utilxi.misc.api.BaseRunti)

HI,
We are facing a very strange problem , during runtime we are facing the below mapping problem ,
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_FILE_TO_IDOC_P~</S P:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
But when we have downloaded the XML from SXMB_MONI and tested the mapping it works fine , only in the run time we are facing this problem , funny part is the same scenario worked fine yester day itself (end-to-end).
Note: Chche is uptodate.
Mapped all mandatory fields
Regards,
Vijaya

Hi
please chech whether the data in the input file is according to the format or not.
for this you go to sxmb_moni,take the input payload from the moni and test with that payload and you will come to lnow where is the error.
if you still have the problem please relly me back
Thanks
Rinku

Connector to SAP AII scanario

Similar Messages

Maybe you are looking for