Group left and group above

I am trying to do a group left within or below a group above, like so.
Name John Doe
Incident Activity
12345 Apply
Accept
Modify
12346 Apply
Accept
Modify
Name Bill Smith
Incident Activity
12347 Apply
Accept
Modify
12348 Apply
Accept
Modify
I can't figure out how to specify different types of grouping for different groups.
Any suggestions?
null

Make a group above report for the first 2 groups. in the Data model extend the detail's repeating enclosing frame.
Inside this frame draw an additional default layout (a button in the Layout Editor on the left toolbar) and inside this one insert your detail group.
Or... you can create an above group without any break first, then separate a group in the Data Model and add a repeating frame around the detail columns. Specifi as source of this frame the name of the detail group from the Data Model.

Similar Messages

How to group Left and Right audio tracks from a .OMF file?

Hi, i'm editing the sound of my short film, i've sent a .OMF to audition from premiere, but the left and right tracks are seperate tracks in the multitrack session, how would i group them so whatever i do to one channel, will be done to the other

This is because the OMF specification requires mono audio files
It really depends on what you are trying to do with the two tracks as to the best answer as far as 'grouping'
You could select all the clips on both tracks and right mouse click and select 'group'
You could send both tracks to a bus
You could export the two tracks to a stereo file and bring that back into the session
Lots more things I'm sure but a little more detail as to what you are trying to do would help

Advanced datagrid with grouped columns and grouped rows

hello every body, plz need your experience help. 'cause Im so new using FLEX
I have an XML (like an XML data type) something like this
<Table>
<Rows>
    <cAgencia>F0002</cAgencia>
    <cAgNombre>SanBorja</cAgNombre>
    <cTVentanilla>V0002</cTVentanilla>
    <dTVNombre>Plataforma</dTVNombre>
    <TcksEnEspera>20</TcksEnEspera>
    <VentsEnAtencion>50</VentsEnAtencion>
</Rows>
<Rows>
     <cAgencia>F0003</cAgencia>
     <cAgNombre>Miraflores</cAgNombre>
     <cTVentanilla>V0002</cTVentanilla>
     <dTVNombre>Plataforma</dTVNombre>
     <TcksEnEspera>30</TcksEnEspera>
     <VentsEnAtencion>40</VentsEnAtencion>
   </Rows>
<Rows>
     <cAgencia>F0002</cAgencia>
     <cAgNombre>SanBorja</cAgNombre>
     <cTVentanilla>V0003</cTVentanilla>
     <dTVNombre>Caja</dTVNombre>
     <TcksEnEspera>55</TcksEnEspera>
     <VentsEnAtencion>25</VentsEnAtencion>
   </Rows>
   ...... (continue)
</Table>
so, I need to make a table (I guess with advancedDataGrid) something like this
as you can see,   I have to group them by columns and Rows. I have found a "mx:groupedColumns" that maybe could help me , but I couldn't find something like "mx:groupedRows".
The grid may be dynamic,   for example if I have another XML node like:
<Rows>
     <cAgencia>F0004</cAgencia>
     <cAgNombre>SanMiguel</cAgNombre>
     <cTVentanilla>V0002</cTVentanilla>
     <dTVNombre>Plataforma</dTVNombre>
     <TcksEnEspera>15</TcksEnEspera>
     <VentsEnAtencion>52</VentsEnAtencion>
   </Rows>
the grid may add a ROW and in the column of plataforma add the data: 15 and 52, so the grid may be something like this:
as you can see, the grid may add rows and columns in depends of the count of XML data.
plz help.
thanks, regards from Lima, Peru.
JS

any help ????????? I found OLAPDataGrid .....   I was thinking to send all the data into a bidimensional Array , then pass the data of my bidimensionalArray to OLAPDataGrid ... but I'n not sure if Flex is able to do it ....
the really serious problem is the special ROW I must use ...
regards
JS

Newbie Group by and Group by

I can do a group by, but I need to have TWO Group by so my output would look like this
in ONE report:
Month Hours
Oct. 2008 10
Nov. 2008 17
Dec. 2008 14
Total 41
Produce Hours
Apples 7
Grapes 15
Peaches 8
Plums 11
Total 41
Below will give me the Produce total:
Select Sum(Phours) Shours,Pname from aims.dummy
group by Pname
=========================
Below will give it by Date:
Select Sum(Phours) Shours,Pdate from aims.dummy
group by Pdate
=========================
Here's my input example:
drop table dummy;
create table dummy(pname varchar2(20)
,Phours numeric(10,0)
,pdate date);
insert into dummy(pname,phours,pdate)
values('Apples',4,to_date('20081001','YYYYMMDD'));
insert into dummy(pname,phours,pdate)
values('Apples',3,to_date('20081101','YYYYMMDD'));
insert into dummy(pname,phours,pdate)
values('Grapes',3,to_date('20081001','YYYYMMDD'));
insert into dummy(pname,phours,pdate)
values('Grapes',12,to_date('20081201','YYYYMMDD'));
insert into dummy(pname,phours,pdate)
values('Peaches',3,to_date('20081001','YYYYMMDD'));
insert into dummy(pname,phours,pdate)
values('Peaches',5,to_date('20081101','YYYYMMDD'));
insert into dummy(pname,phours,pdate)
values('Plums',9,to_date('20081101','YYYYMMDD'));
insert into dummy(pname,phours,pdate)
values('Plums',2,to_date('20081201','YYYYMMDD'));
What is the best way to do this?
TIA
Steve

Like this...
SQL> select * from dummy;
PNAME                    PHOURS PDATE
Apples                        4 01-OCT-08
Apples                        3 01-NOV-08
Grapes                        3 01-OCT-08
Grapes                       12 01-DEC-08
Peaches                       3 01-OCT-08
Peaches                       5 01-NOV-08
Plums                         9 01-NOV-08
Plums                         2 01-DEC-08
8 rows selected.
SQL> break on type skip 1
SQL> ed
Wrote file afiedt.buf
1 select 'By Month' as type, to_char(pdate,'Mon') as descript, sum(phours) as hrs
2 from dummy
3 group by to_char(pdate,'Mon')
4 union all
5 select 'By Produce', pname, sum(phours)
6 from dummy
7 group by pname
8* order by 1,2
SQL> /
TYPE       DESCRIPT                    HRS
By Month   Dec                          14
           Nov                          17
           Oct                          10
By Produce Apples                        7
           Grapes                       15
           Peaches                       8
           Plums                        11
7 rows selected.
SQL>Of course you may want to change how the ordering is done so that the months come out in order for that group and the produce comes out alphabetically for the second group, but I'll leave that as a challenge for yourself. ;)

Valuation grouping Code and Group together valuation area

Hi,
I wan tto know what is mean by Valuation grouping code in our system for all valuation area it is 0001 can we create seperate account determination for different plant to same company code or for one company we can create only one account determination process.

Hi,
The account determination can be done at sprommvaluation and account assignment ---account dtermination ---with out wizard.
The valuation grouping code makes it easier to set automatic account determination. Within the chart of accounts, you assign the same valuation grouping code to the valuation areas you want to assign to the same account.
Valuation grouping codes either reflect a fine distinction within a chart of accounts or they correspond to a chart of accounts.
Within a chart of accounts, you can use the valuation grouping code
Example:
The valuation areas 0001 and 0002 are assigned to company codes which use the same chart of accounts. For both valuation areas, however, you would like to define a different account determination.
You must assign different valuation grouping codes (for example, 0011 and 0022) to both valuation areas
Example:
Valuation areas 0003 and 0004 are assigned to company codes which use the same chart of accounts. Account assignment for both valuation areas should be similar.
You assign the same valuation grouping code (for example, 0033) to both valuation areas. Thus, you only have to define account assignment for both valuation areas once.
Regards,

Possible to combine group call and group video cal...

If I have a premium account is it possible to start a conference with a mix of dial in and video participants? The only cost would be for the one premium account, correct?

Hi, Chad_Guidry_TX, and welcome to the Community,
Good news! The answer is, "Yes!" Skype has done all the work for us; please see these FAQ articles, which include screen shots, for instruction on how to set this up:
https://support.skype.com/en/faq/FA10978/how-can-people-join-my-skype-group-call-from-a-mobile-or-la...
https://support.skype.com/en/faq/FA34/can-i-have-more-than-one-pstn-mobile-or-landline-phone-number-...
https://support.skype.com/en/faq/FA2831/making-a-group-call-windows-desktop
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Problem in creating group above AND group left in one report!

Hi all,
I need a report that is a combination of group above and group
left.
Suppose I have 3 table (Emp, Sales, Product):
Emp Table has 2 column
- Emp_PK
- Emp_Name
Sales Table has 4 column
-Sales_PK
-Sales_Date
-Emp_FK
-Produck_FK
-Quantity
Product Table has 3 column
-Product_PK
-Product_Name
-Product_Price
I want to make Employee Sales Report For The Month that will
look like this:
Emp Number___: Emp_PK
Emp Name_____: Emp_Name
Sales Date______Product_Name____Quantity \(2 sales
________________Product_Name____Quantity /the date)
Sales_Date______Product_Name____Quantity
As you can see this consist of group above (The Employee) and
group left (The Sales and Product).
I create this by using 2 queries and link them (the Emp_PK from
1st query and Emp_FK from 2nd query) on the report builder using
data link.
The first query is:
Select Emp_PK, Emp_Name from Emp
The second query is
Select Emp_FK, Sales_Date, Product_Name, Quantity
From Sales, Product
Where Product_PK=PRODUCT_FK
I then create the layout for second query and choose group left
for Sales_Date using wizard and I create additional layout to
for the employee.
The problem is that when I run this report, it will print ALL
the employee record first (including employee who has NOT sale
anything) and then on the last page it will print the record of
Last employee on the Emp table and ALL sales record (including
those that is done by other employee).
This report will run correctly if I choose an exact employee
(For example by adding Where Emp_PK=1111 in the first query) to
report all of the sales done by this person (employee with emp
number of 1111). However I need the report to run and print
ONLY those employee who has Sales Records!
I thought that by linking the 2 queries in Data Model, it will
have the same effect as linking using the WHERE clause in query.
If suppose I create a query like this:
SELECT Emp_PK, Emp_Name, Sales_Date, Product_Name, Quantity
FROM Emp, Sales, Product
WHERE Emp_PK=Emp_FK AND Product_PK=Product_FK
The report will run OK but I can only choose EITHER group above
or group left for this ONE query methods in report Wizard.
Sorry if it is a long question but I hope you can see what I am
trying to do.
Thanks in advance for any tip.

hello,
of course you can create group left and group above blocks in a
single report.
you might want to use the INSERT REPORT BLOCK instead of the
report wizard, as the report wizard only allows you to use one
report layout per report, where the report block wizard (invoked
by INSERT REPORT BLOCK) allows you to choose on a per-block
basis.
of course you can create the blocks completely from scarth by
hand, if you want to.
regards,
the oracle reports team --pw

Converting a Group Left to a Group Above Report

I have created a dozen group left reports which I thought would only take up one page of data. I have found that some of them will actually require more pages but the report will only produce 1 page.
As an example I created the same report but used the group above style and this time by default it creates multiple pages. So how can I change my other reports into the group above style - note I cannot use the wizard as I have made many layout changes which woujld be lost.

It's not because of Group Left vs Group Above that report display only the first page. Make sure the Print Object On property of the repeation frames set to First Page Only, not All Pages.

How to Group left + group above

I am new to oracle report. Hope to get clear steps thx.
I have 7 columns in my report. 3 columns using group-left and i want to use another 1 column for group above.
How do i create group above for the column i want ?

It is not clear to me how your report layout will be looking at runtime. Can you provide any output example.
Always use the 6 digit before and after your example. Only small letters inside the curly brackets. For more information see FAQ right corner of the page.
-Ammad

Order by group left report

Hi,
I have a sql which contains an order by clause (order by field1, field2), the query runs fine in SQL*Plus.
I tried to create a Group Left report in Reports 10g. When I run the report, it disregards the order by clause.
The report works fine if I picked tabular.
Thanks in advance
Tushar

Let us take an example of a table with the following structure -
create table test (grade varchar2(3),
detail varchar2(10));
Here GRADE is the column which contains numbers as well as alphabets or
alpha-numerals.
A normal query on the table would result in the following -
select grade, detail from test
GRADE DETAIL
1 DET1
1 DET2
1 DET3
1 DET4
2 DET1
2 DET2
2 DET3
5 DET1
A DET1
A DET2
B DET1
B DET2
B DET3
B DET4
10 DET1
10 DET2
10 DET3
If you want the GRADE to be sorted in a numeric order first and then alphabetically,
you can use the concept explained .
select grade, detail
from test
order by decode( TO_CHAR(NVL(LENGTH(TRANSLATE(grade,'A1234567890','A')),0)),
'0',LPAD(grade,8),
grade)
GRADE DETAIL
1 DET1
1 DET2
1 DET3
1 DET4
2 DET1
2 DET2
2 DET3
5 DET1
10 DET1
10 DET3
10 DET2
A DET1
A DET2
B DET1
B DET2
B DET3
B DET4
If you were to write the above query in Oracle Reports (tabular style),
the output would be the same as above.
But if you create a group left or group above style with GRADE as the
higher group, the same query would give the following result -
GRADE DETAIL
1 DET1
DET2
DET3
DET4
10 DET1
DET3
DET2
2 DET1
DET2
DET3
5 DET1
A DET1
DET2
B DET1
DET2
DET3
DET4
This is because although the server sends back the resulting set in the desired
ordered fashion, the grouping on grade does a further sort (ascending - the
default). But this sort is done alphabetically since this is a varchar2 column.
To avoid this or to achieve the desired output (numbers to appear sorted first
and then alphabets), use the decode in the select list itself.
Now the query for the report becomes -
select decode( TO_CHAR(NVL(LENGTH(TRANSLATE(grade,'A1234567890','A')),0)),
'0',LPAD(grade,8),
grade) grade
, detail
from test
The order by clause in the query is irrelevant since the grouping inside reports
anyway does the sort. The result would look like
GRADE DETAIL
1 DET1
DET2
DET3
DET4
2 DET1
DET2
DET3
5 DET1
10 DET1
DET3
DET2
A DET1
DET2
B DET1
DET2
DET3
DET4

Group Left report: problem in order the columns

Hi,
I have a Group Left report in report6i with group A and Group B. Group A has columns AAA, BBB, CCC, DDD, EEE, FFF and Group B has coulmn YYY, ZZZ.
The problem is report does not take order by clause. It sort the report by first column of Group A, does not reflect my order by clause.
I created laxical variable in order to change order by clause dynamically.
Any suggestion?
Thanks in advance
Dip

Hi,
I have a Group Left report in report6i with group A and Group B. Group A has columns AAA, BBB, CCC, DDD, EEE, FFF and Group B has coulmn YYY, ZZZ.
The problem is report does not take order by clause. It sort the report by first column of Group A, does not reflect my order by clause.
I created laxical variable in order to change order by clause dynamically.
Any suggestion?
Thanks in advance
Dip

Group and Group counter in Routing

Hi all,
what is group and group counter in routing , how these are used in routing , please explain.
Regards,
Joseph.

Dear Joseph,
1.Each routing is stored against a group and group counter no.
2.When we create routing without respect to any material and only by giving the plant,the set of operations gets saved under one
group counter and group no.
4.Many materials can be assigned to this same group and group counter no,so that the routing is valid for all the materials included.
5.When you create a routing for material specific,the set of operation gets saved in a group no and group counter no as 01,when
you create another routing with another set of operations for the same material,plant and task list combination now the group no
remains same and the group counter gets saved under 02.
6.This data can be further helpful in assigning the routing data in the production version,.
Check and revert
Regards
S Mangalraj

I successfully deleted a user from my MacBook through the Users and Groups window in System Preferences. But now I cannot close the lock in the bottom left corner of the box. When I click on it, I briefly see a word that I think says "reauthorizing" but

I successfully deleted a user from my MacBook through the Users and Groups window in System Preferences. But now I cannot close the lock in the bottom left corner of the box. When I click on it, I briefly see a word that I think says "reauthorizing" but the word flashes too quickly to tell for sure.

If you are admin.
Try restarting your Mac.

Group Policy Guru? Group Policy and Windows 7 erratic and inconsistant.

(*If you don't feel like reading everything, skip to the bottom two paragraphs for my questions)
I've had a premier call open with MS since August. This week I had a Microsoft Technician in-house. Though we eliminated some possibilities, we're not really closer to a cause or solution.
Every time we work with an expert, I get a different explanation to describe the situation we are viewing.
Quick summery of the issue: We've been using Group Policy to manage most Windows XP and 7 settings for years, but starting the middle of last year, we began having clients with machines where some or all group policies would fail to apply.
These could be long assigned policies, new polices, or changes to policies. It would never affect everyone or even a majority at once, and the resolution is never the same. Sometimes a GPUDPATE /FORCE sometimes fixed automajically the next day,
sometimes (but very rarely) longer.
Troubleshooting History:
What we found in early troubleshooting, that these machines, had errors in Event Viewer for Netlogon, Time-Sync, and Group Policy. The other issue we noticed, was that our GPRESULT /H reports were missing security groups and the denied section was
nothing but SSID's. The first issue pointed me to:
Event ID 5719 and event ID 1129 may be logged when a non-Microsoft DHCP Relay Agent is used
I installed these Hot Fixes. No change to any of the errors in event viewer, or to our Group Policy problems.
Initial work with Premier Support found that Netlogon, Time-Sync, and Group Policy, were failing before loading of the network stack. The suggestion was to apply the group policy setting "Always wait for the network at computer startup and
logon". At the time, this seemed not to work. The policy was set on a test bed of laptops and desktops, and no changes in behavior were seen after 3 days.
Windows 7 Clients intermittently fail to apply group policy at startup
For some time after this, we were collecting GPSVC and NetTrace logs for Premeir Support, trying to document and troubleshoot the problem. Eventually we got fed up and asked our TAM to call in a pro to get this resolved. We were sent an engineer
for 3 days. For three days we banged away on this issue. We verified AD and replication health, we tried numerous fixes and workarounds. I learned 3 different desriptions of how Group Policy works, and in the end we thought we had a workaround
using the "Always wait for the network at computer startup and logon" because of a single success late in the day. On day 3 we tried replicating this fix, and quickly realized that the same issue we were having preventing other GPOs to apply,
were also preventing our "fix" GPO from applying. So we went the route of using a registry entry. I also had a problem that even though it was making the process more consistant, it was still taking 3 reboots for a Computer Policy, assigned
to a computer object via Security Group, to fully take affect on a computer.
I used the registry methods in the above article. It didn't work, no sign it was having the same affect the GPO had had.
Our support engineer claimed this was the proper method, but that path wasn't even close in a Windows 7 SP1 registry, and after creating all the keys that were not present, it still didn't work.
Always wait for the network at computer startup and logon - AzureWeb
We ran out of time, our engineer returned home.
I can understand how these errors indicate a problem applying Group Policy at boot. But to me it doesn't explain why it doesn't correct post boot, and after a GPUDPATE /FORCE and a reboot.
It also doesn't explain why we were working fine for years, then all of a sudden DHCP is being outrun by background services. (By the way logging showed DHCP wasn't significantly delayed, out boot process was actually excellent, health wise.)
Why all of a sudden is this not behaving optimly? No changes to network design or function. No changes to the domain since 2008 R2 was installed in 2011.
Today I'm reading through all these KB's and articles again, and took some time to read:
[Forum FAQ] Common steps to start troubleshooting Group Policy
application and it's links below.
We ran though all of that before and during the 3-day onsite. It's not getting us any closer to the cause or a solution.
I found and begin some deep reading in this link today. It has some additional information I will try to use next week:
Group Policy Basics - Part 3: How Clients Process GPOs
The one unanswered question I have is this. How is group policy supposed to apply to a computer, when that policy is applied to a AD Security Group, in which the computer object is a member?
Before we began having this problem, we would assign a computer GPO, then ask the user to reboot. If it were a user GPO, we'd ask the user to log off, or reboot. Either way, if we allowed a few minutes for AD and FRS replication, the user would
log back in with that new policy in affect. A new imaged machine would boot with all the GPO's linked to that domain and assigned to "Authenticated Users", already in affect. Admin groups would be present in administrators, proxy settings
would be set in Internet Explorer, etc.
Now I'm aked to beleive this was never the case from Premeier Support and Microsoft Engineers. That those policies require the equilent of a "GPUPDATE /FORCE" that was executed by the Local_System account. That 3 reboots may
be nessessary for a group policy to be applied. One for the AD Security Group to be applied. One for the Computer Policy to be applied. And a final one for the policy in the GPO to be applied to Windows.
Can someone confirm or correct this information please? It's imperitive to my troubleshootng.
There's no place like 127.0.0.1

That key is empty on all of my machines I have checked today. Working and problematic alike.
GPRESULT logs, when ran as me, historically would show the group polices applied, denied, and the AD group membership all by name. About 6 months ago I noticed this changed.
Now they show the applied GPO's by name, a few of the denied GPO's by name, most by SID, and only 2 to 3 AD groups, though PowerShell shows all the AD groups assigned. This happens after several AD security and distribution groups are added to the
machine (Radia software distribution uses Dist groups to assign software).
A check showed no groups with long legacy Kerberos keys.
When we make a change to AD Security Group membership, to assign or deny a Group Policy, is usually when we encounter this problem. It will usually fix itself in 24 hours of the machine being left up and running. But no amount of GPUPDATE /FORCE
and rebooting will cause the changes to take affect.
During this time, the Group Policies will show assigned to the computer in the GPRESULT log.
Yesterday I began looking into Spanning Tree configuration on our network being a possible cause for the boot up issues. I'm waiting on responses from our Network group to confirm our configuration.
There's no place like 127.0.0.1

How to design Group Left Report using RTF method ( XML Publisher )

Hi,
I need to design Group Left Report using basic RTF method. I am able to design basic simple report and Group Above Report but I am not getting Group Left Report. Can anyone help me out.
Thx N Regs,
Khan.

Group Left report can be done using table consisting of 1 row and 2 columns. Group header goes to the column 1, group details go to the second column. Group details can be also designed using table, in this case you get table within table cell. "for-each.." statement for the upper level group to be placed in the left column before the group header data. "end for-each.." to be placed in the second column after the detail data.

Group left and group above

Similar Messages

Maybe you are looking for