Consignment and Configurable mate.
Hi Gurus,
My doubt is
Is it advisable to follow consignment processing with configurable material?
If yes what would be item category determination for this/
if no why couldn't it possible to use configurable material in consignment?
Ple share your views.
Thanks
Shiv
Hi Shiv patil
Below is the Configurable Material process.
Variant Configuration
Define The Characteristics
Transaction Code: CT04
Example the Product is pump
Type: Monoblock Pump
Centrifugal pump
Capacity: 5Hp, 10Hp, 15Hp
Characteristics: Z_TYPE
Continue
Dialog BOX: Do you want to Create?
Yes
Description: Pump Type
Data Type: Characteristic
Number of characters= 10
Select value button
Characteristic value Description
TYPE1 Monoblock
TYPE2 Centrifugal
Save the characteristics
2.Create a Class
Transaction Code: CL01
Class= Z_PUMP
Class Type= 300 (variant) / 023 for batch determination
300=variant class
Continue
Description= Class for Configuration of Pump
Select Char (Characteristic) Button
Characteristic
Z_TYPE
Save
3) Create again one more characteristic as Price = ZP_PRICE
Transaction Code: CT04
Characteristic=ZP_PRICE
Continue
Yes to dialog Box
Description: Price Characteristic
Select Additional data
Table name: SDCOM
Field name: VKOND
Save the Characteristic
4) Assign the dependencies i.e. the characteristic to the Price characteristic
Use CT04 and call the Z_TYPE
Select Values
Select TYPE1
Select Extra
Select Object Dependencies
Select Editor
Select radio Button: Procedure
Continue
Against 10 use the following syntax to connect the characteristic with Price
$Self.ZP_PRICE=TYPE1
Save
Repeat the Exercise for TYPE2
Save and back
5) Prepare the material master
Material Type: KMAT (Configurable material)
Most of the fields are similar to material TYPE=FERT except following
a) Maintain avc=02 (individual requirements)
b) Maintain MRP1, MRP2, MRP3 under MRP3, strategy group=25
c) Maintain also account assignment group
Save
6) Prepare the Configurable profile for material and assign the Class to Profile
Transaction Code: CU41
Select: material
P=Profile number=01
Name=Pump
Class= 300
Select 01 and select Class assignments
Enter class=Z_PUMP
Now list of the characteristic are shown
Select the characteristic Pump TYPE
Select the values TYPE1 and TYPE2
Save the Profile
7) Create conditions
Default Condition= PUMP TYPE=MONOBLOCK
ZKP0= 8000
VA00 for TYPE2= Centrifugal= 1000
Use VK11 to maintain Conditions
When creating for VA00
Variant=TYPE2
Rate=1000
Save
8) Create an Order and check profile and also the Pricing
In the order when we enter material system will propose a configurable profile and selection buttons
Select the choice and select Pricing and the system will do pricing according to the variant
Create one more characteristic = capacity of Pump
Characteristic= ZP_CAP
Description=capacity
Data Type=Character
No of char=10
Select value
Characteristic value Description
CAP1 5HP
CAP2 10HP
Save
2. Assign the new characteristic = class Z_PUMP
CL02
Class=Z_PUMP
Continue
Select CHAR button
Assign the newly created characteristic ZP_CAP
3. Assign the Price characteristic to Capacity characteristics
CT04=ZP_CAP
Select values
Select CAP1 and assign ZP_PRICE
Repeat like it was done in earlier steps
4. Already class is been activated with new characteristic. Activate this in the Profile (select variants)
CU42
Material =PUMP1
Select profile=01
Select class assignments
Select second characteristic and select values CAP1 and CAP2 and save the Profile
5. Maintain condition records
VK11
MONOBLOCK+5HP=8000
10HP=3000
Variant = CAP2= rate is 3000
Now create an Order, select variants, stock quantity, delivery and Billing
Save the Order---Based on the order the items are produced
Stocking through MB1c
Movement = 521 E
Plant = K001
SLOC=KS01
Enter sales order Number, item number in the sales order and Recipient of Goods
Save
(Note: in material master maintain valuation class= 7900)
Create Delivery and Billing
Reward if useful to u
Similar Messages
-
Consignment and Tax Base Amount
All,
We are getting the error "the tax amount must not be greater than the tax base". When doing a trace the Tax Base Amount is ZERO. Can someone tell me where/how the tax base amount is determined?
Thank you,
SandraWhat I have found so far is the system calculates the base amount by adding the line items that have a tax code associated with it. In the scenario I have it appears the tax code is not associated with any of the items on the settlement and therefore the tax base = 0.
This is SAP standard transaction MRKO in a 4.5B system. The info record has a tax code on it and it does not appear to matter which tax code in on the info record.
Anyone have any ideas on where I can look or what to look for? Is this a tax set up issue? Is it a program error? I've tried to find all the tax configuration and compare with a working example in the same system but have not been successful. I've also looked in OSS and there are several OSS notes that are remotely related to consignment and taxes but we are on a fairly high hotpack # so .... just not sure where to go.
Thanks for any suggestions.
Sandra -
Vendor consignment scenrio configuration ??
hi all
Can anybody explain me about the vendor consignment scenrio configuration step by step.
Please expalin me step by step with configuration details with account determination configuration.
Thanks
SAP-MMHi,
the material is at customers place and customer use it in portions and pays accordingly,liability of material is with vendor till
Features of consignment are:
1.The relation between the two parties is that of consignor and consignee and not that of buyer and seller
2.The consignor is entitled to receive all the expenses in connection with consignment
3.The consignee is not responsible for damage of goods during transport or any other procedure.
4.Goods are sold at the risk of consignor. The profit or loss belongs to consignor only.
in SAP consignment scenario is as follows
Consignment Info Record create with material and vendor.
Consignment Purchase Order (create with item catagery k)
Goods Receipt with movement type 101K
Consignment Stock to Own Stock,Transfer posting with
Movement type 411 k
Goods Issue to direct consuption 201K
Settlement throughu2014mrko
Regards
Ram -
Diff b/w alert Categories and configurations
Hi Experts,
Could you please help me here, what is diff b/w Alert Categories and configurations.
Ans also what is the use of Container elements in Categories.
You ans is very helpful for me.
Thanks in Advance all.
Regards,
Madhu.Hi Madhu,
In Alert configuration alert rules are defined based on Alert Categories. So Alert Categories has defined using t code ALRTCATDEF. Container Elements fetches the appropriate dynamic message base on the container variable.
Go through the below doc:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00e97ba2-85ce-2b10-20bc-bc05cd172154?QuickLink=index&…
Regards,
Krupa -
I have read in a tutorial for the board 1200 that I can calibrate it with the Calibration and Configuration Palette in LabVIEW, but I do not have them and I could not download it to access its libraries, so I can only download the NI-DAQ software,What's my best choice and if it is to download the palette with its libraries, how can download it with them?I'd appreciate your answers
If you wish to use your 1200 device in LabVIEW, you must download and install NI-DAQ. When you install NI-DAQ, it will ask you if you would like to install support for LabVIEW. By installing this support, you will then have access to the DAQ pallette in LabVIEW. The DAQ pallette requires that you have NI-DAQ installed.
For more information on installing and using your device, you can refer to the DAQ Quick Start Guide. You can download it from:
http://digital.ni.com/manuals.nsf/14807683e3b2dd8f8625677b006643f0/0eca53fe80911b1f862568560068295d
Regards,
Erin -
How to properly create and configure SharePoint 2013 Search service with PowerShell?
Hello Forum,
I have installed SharePoint 2013 across three tier servers:
WFE Server (Of course, SharePoint is installed here. Bsically this is just a Web server)
APP Server (Of course, SharePoint is installed here + Central Admin + Service Apps).
SQL Server
I now want to create and configure the Search service, obviously on the APP Server, But of course the search functionality should work correctly on the WFE server to.
I want to do this via a proper PowerShell script. I found Spence Harbar's script on: (http://www.harbar.net/articles/sp2013mt.aspx), But it has three problems, and they are as follows:
1) Spence Harbar himself literally stated on his article that this script is for: "deploying on a single server farm", But what if I have three tier servers? Could anyone please help me out in suggesting the required tweaks in the
script?
2) By default Search uses the SP_Farm account, So, How can I change the script to use other dedicated account for the search service e.g. SP_SearchAcc ?
3) How can I modify the script to specify a default Search center?
4) Apart from all the three aforementioned point - Is the script missing anything?
I would greatly appreciate your inputs - Thanks !the only differences are where you place the components. if you are doing a small server farm with a 1-1-1, most likely you just need to change the script so that you set the index and query processing component on the front end, but the others on
the app server. just a 2 second update... just keep in mind this will work, but I am making several assumptions without any knowledge of your farm, users, capabilities.
generally, there would be more of a breakout on the topology than that, but im guessing for this farm that you wont have dedicated search servers. also, a lot depends on # users (rps really), # items in index, size of VMs (RAM for query processing,
Disk for index, etc, etc), and making sure the topology works for your particular environment and needs.
if you want more detailed topology help, which aligns as closely as possible to "best practices" (not that those exist in SharePoint, go ahead and provide the total # users, average/peak RPS for search, current index size, content source types,
VM specs RAM, CPU, #/Size of drives, HA concerns/priority (obviously isn't, since only 1-1-1)
Christopher Webb | MCM: SharePoint 2010 | MCSM: SharePoint Charter | MCT | http://christophermichaelwebb.com -
VCenter SRM Installation and Configuration
Hello,
We have installed and configured SRM 5.5.1 in Main site and DR site. In DR site we have two hosts and no shared storage.
Each have one vsphere replication appliance deployed and both the sites connected and we have also replicated two virtual machines successfully.
Next step we have configured protection group and recovery plan as well.
But when we test a recovery plan it gives a error "unable to access virtual machine configuration file"
Is it necessary we must have a shared storage? Can't we use local datastore on each host to power on the machines.
Regards
KarthikHi,
No, shared storage is not required:
Array/ vendor types
Requires same storage replication solution at both sites (eg. EMC RecoverPoint, NetApp vFiler, IBM SVC, etc)
Can support any storage solution at either end including local storage as long as it is covered by the vSphere HCL
SRM - Array Based Replication vs. vSphere Replication | VMware vSphere Blog - VMware Blogs
Michael. -
Ibase and configuration error while creating a Service Contract
Hi,
I am creating a Service Contract programatically and not manually through the T-code CRMD_ORDER.
I am using the Function module CRMXIF_ORDER_SAVE for the same as the FM BAPI_BUSPROCESSND_CREATEMULTI and CRM_ORDER_MAINTAIN did not work for me because of the number of parameters that needs to be passed for creating the Service contract.
The Service contract does get created but there are errors corresponding to the Point of delivery and configuration missing.
The error corresponding to the point of delivery says "IS-U:allocate a point of delivery to the item" even though I am passing the values in the REF_OBJECTS field of the CRMXIF_BUSTRANS_ITEM structure.
Structure for the same is :
ls_objects_i-TYPE_REF_OBJ = 'B'.
ls_objects_i-object_task = 'I'.
ls_objects_i-PRODUCT_GUID = lv_product_guid.
ls_objects_i-PRODUCT_ID = p_product_id.
ls_objects_i-IBASE_COMP_GUID = ls_output-IBASE_GUID.
ls_objects_i-IB_INSTANCE = 1582.
ls_objects_i-IB_COMP_VALID = '20070926093651'.
ls_objects_i-SERIAL_NUMBER = '0102 46CC9C278B92025BE10000000AD5920E'.
append ls_objects_i to lt_objects_i.
p_ls_item-REF_OBJECT-data = lt_objects_i.
p_ls_item-REF_OBJECT-datax = 'X'.
Similarly,the error for the configuration says "Configuration for the item missing" and here again I am passing the values in the CONFIGURATION structure.
Structure for this is :
p_ls_item-configuration-data-consist = 'T'.
p_ls_item-configuration-data-kbname = 32.
p_ls_item-configuration-data-kbvers = '0.0'.
p_ls_item-configuration-data-kbprofile = 'E_H_B'.
p_ls_item-configuration-data-complete = 'T'.
p_ls_item-configuration-data-spras = 'E'.
p_ls_item-configuration-data-cfginfo = 'VCOND=VARIANT_CONDITION_KEY'
ls_cuins-OBJ_TYPE = 'SERV'.
ls_cuins-class_type = 300.
ls_cuins-obj_key = 'E_H_B'.
ls_cuins-obj_txt = 'E_H_B'.
ls_cuins-QUANTITY = '1.0'.
ls_cuins-COMPLETE = 'T'.
ls_cuins-CONSIST = 'T'.
append ls_cuins to lt_cuins.
ls_config_i-instance = lt_cuins.
p_ls_item-configuration-data = ls_config_i.
p_ls_item-configuration-datax = 'X'.
clear ls_config_i.
ls_cuval-charc = 'DISCOUNT_EUR'.
ls_cuval-charc_txt = 'DISCOUNT_EUR'.
ls_cuval-value = '0.0'.
ls_cuval-value_txt
append ls_cuval to lt_cuval.
ls_instance-value = lt_cuval.
insert ls_instance into table lt_instance.
ls_config_i-instance = lt_instance.
p_ls_item-configuration-data = ls_config_i.
p_ls_item-configuration-datax = 'X'.
clear ls_config_i.
Kindly help if anyone has worked on this.......
Regards,
Puneet Jhari.Hi,
I am creating a Service Contract programatically and not manually through the T-code CRMD_ORDER.
I am using the Function module CRMXIF_ORDER_SAVE for the same as the FM BAPI_BUSPROCESSND_CREATEMULTI and CRM_ORDER_MAINTAIN did not work for me because of the number of parameters that needs to be passed for creating the Service contract.
The Service contract does get created but there are errors corresponding to the Point of delivery and configuration missing.
The error corresponding to the point of delivery says "IS-U:allocate a point of delivery to the item" even though I am passing the values in the REF_OBJECTS field of the CRMXIF_BUSTRANS_ITEM structure.
Structure for the same is :
ls_objects_i-TYPE_REF_OBJ = 'B'.
ls_objects_i-object_task = 'I'.
ls_objects_i-PRODUCT_GUID = lv_product_guid.
ls_objects_i-PRODUCT_ID = p_product_id.
ls_objects_i-IBASE_COMP_GUID = ls_output-IBASE_GUID.
ls_objects_i-IB_INSTANCE = 1582.
ls_objects_i-IB_COMP_VALID = '20070926093651'.
ls_objects_i-SERIAL_NUMBER = '0102 46CC9C278B92025BE10000000AD5920E'.
append ls_objects_i to lt_objects_i.
p_ls_item-REF_OBJECT-data = lt_objects_i.
p_ls_item-REF_OBJECT-datax = 'X'.
Similarly,the error for the configuration says "Configuration for the item missing" and here again I am passing the values in the CONFIGURATION structure.
Structure for this is :
p_ls_item-configuration-data-consist = 'T'.
p_ls_item-configuration-data-kbname = 32.
p_ls_item-configuration-data-kbvers = '0.0'.
p_ls_item-configuration-data-kbprofile = 'E_H_B'.
p_ls_item-configuration-data-complete = 'T'.
p_ls_item-configuration-data-spras = 'E'.
p_ls_item-configuration-data-cfginfo = 'VCOND=VARIANT_CONDITION_KEY'
ls_cuins-OBJ_TYPE = 'SERV'.
ls_cuins-class_type = 300.
ls_cuins-obj_key = 'E_H_B'.
ls_cuins-obj_txt = 'E_H_B'.
ls_cuins-QUANTITY = '1.0'.
ls_cuins-COMPLETE = 'T'.
ls_cuins-CONSIST = 'T'.
append ls_cuins to lt_cuins.
ls_config_i-instance = lt_cuins.
p_ls_item-configuration-data = ls_config_i.
p_ls_item-configuration-datax = 'X'.
clear ls_config_i.
ls_cuval-charc = 'DISCOUNT_EUR'.
ls_cuval-charc_txt = 'DISCOUNT_EUR'.
ls_cuval-value = '0.0'.
ls_cuval-value_txt
append ls_cuval to lt_cuval.
ls_instance-value = lt_cuval.
insert ls_instance into table lt_instance.
ls_config_i-instance = lt_instance.
p_ls_item-configuration-data = ls_config_i.
p_ls_item-configuration-datax = 'X'.
clear ls_config_i.
Kindly help if anyone has worked on this.......
Regards,
Puneet Jhari. -
Install and configure report service on Oracle Application Server 10g
i want to know how to install and configure report service on Oracle Application Server 10g Release 3 (10.1.3.1.0)
Thanksthe case is that we developed an ADF Application, so we want to deploy it on the latest version of Oracle Application server.
our application communicate with Oracle reports (run oracle reports from our Application) as there are no Oracle report products for JEE Application.
so if there are not report service that can run on Oracle Application Server 10g Release 3 (10.1.3.1.0),
what is the other choices that oracle supports that can help us in this case ??? -
EIS Installation and Configuration
Hi Everybody,
I am trying to install EIS 9.31 on my laptop (i.e Win2k3 Server), I have successfully installed Essbase and EIS
But I have no idea how to configure(Creating DSN Catalog) in EIS.
I am using Oracle 10g. Can any one please help me on thsi installation.
Already I gone through the installation document but I didn't understand how to configure.
If anyone having installation and Configuring Screen shots please send me to my mail
Mail Id: [email protected]
This is very urgent I need to give presentation on the EIS
Thanks in Advance for your help
Awaiting for your quick ResponseI'm not sure what version of software you are looking to install, but for 9.3.1, we just installed our application server (Weblogic), installed Shared Services, supplied the database info and we were good to go. I do believe; however, your mileage will vary depending on the application server you use as some of them have an option for 'automatic' installation and some are manual. (I went the 'automatic' route) You will need to refer to the installation documentation for all of the relevant details, though.
-
I’m spending the day catching up on Jabber/IM&P release notes across the server/clients.
So I’m used to EDI and UDS, but we have a new acronym in the Jabber for Mac 9.2(1) Installation and Configuration Guide called BDI and BDS. However they don’t define what BDI stands for other than BDI is LDAP for non-windows
Clients and suggests it should be used for Jabber for Mac.
What is BDI or BDS spelled out? Something directory integration, but what is the B ?
Then to add to the mix they reference BDS which sounds like the old UDS (is UDS changing to BDS?)
How can Jabber get any more confusing…
I also noted in the Jabber Video for iPad 9.3.4 release notes that Apple is removing the Always Connect option in the near future. Manually launching Cisco AnyConnect Secure Mobility Client before making a call. This is going to upset some customers who like how Lync uses https and just works from anywhere with enhanced directory integration…Basic Directory Integration. It's not new, we had it in the Windows clients as far back as CUPC. The distinction got introduced when EDI was introduced, relying on Windows ADSI APIs instead of the client making a native LDAP bind.
To my knowledge BDI/BDS are the same thing; I'm guessing S is 'service'. UDS remains unchanged.
I also noted in the Jabber Video for iPad 9.3.4 release notes that Apple is removing the Always Connect option in the near future.
Well, they lost a patent infringement lawsuit and chose to change the functionality instead of pay the troll. That's not Jabber's fault. Collaboration Edge will be the way to avoid this in the near future.
Please remember to rate helpful responses and identify helpful or correct answers. -
Hi Techys,
Kindly help me to resolve the below issue
"Configuration Failed Error while running the Shareoint 2010 Products and Configuration wizard in windows 7"
Many Thanks,
MadhuHi,
Follow this link for smooth installation for SP 2010 on Win 7.
http://msdn.microsoft.com/en-us/library/office/ee554869(v=office.14).aspx
Murugesa Pandian.,MCTS|App.Development|Configure -
Install and configuration on the SharePoint server 2007 issue
Hi All,
I have Microsoft Sharepoint 2007 on Windows 2003 and I am trying to Integrate Adobe Lifecycle Rights Management Server which is on Windows 2008 R2 server.
I am trying to Install and configuration on the SharePoint server 2007 but during installation getting error "Failure adding assembly to the cache: Unknown Error"
Please check the Edited install.bat file and error log.
Install.bat
set _my_datetime=%date% %time%
@echo on
echo Begin Installation at %_my_datetime%
echo "Customize <VER> <PORT> <SharepointServerNameOrIP> <SiteDirectory> <siteName> in this install.bat . Verify gacutil.exe path."
@echo off
@SET GACUTILEXE="C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\gacutil.exe"
@SET TEMPLATEDIR="C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE"
@SET RESOURCESDIR="C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\Resources"
@SET WEBAPPDIR="C:\Inetpub\wwwroot\wss\VirtualDirectories\80"
@SET SITEURL="http://sharepoint7:80/sites/DCADC"
@SET STSADM="C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\BIN\STSADM.EXE"
REM cd $(ProjectDir)
%GACUTILEXE% /nologo /i AdobeLCSharepoint.dll /f
%GACUTILEXE% /nologo /i AdobeLiveCycleConnector.dll /f
%GACUTILEXE% /nologo /i AdobeLiveCycleWorkflow.dll /f
pushd %TEMPLATEDIR%\features
Echo Deactivating LiveCycle Connector feature with WSS
%STSADM% -o deactivatefeature -filename LiveCycle\feature.xml -url %SITEURL% -force
Echo Deactivating LiveCycle Workflow feature with WSS
%STSADM% -o deactivatefeature -name LiveCycle/Workflow -url %SITEURL% -force
Echo Uninstalling LiveCycle Connector with WSS
%STSADM% -o uninstallfeature -filename LiveCycle\feature.xml -force
Echo Uninstalling LiveCycle Workflow with WSS
%STSADM% -o uninstallfeature -name LiveCycle/Workflow -force
popd
Echo Copying source files to WSS \TEMPLATE directory
xcopy TEMPLATE %TEMPLATEDIR% /e /y /i
Echo Copying Feature Resource files to WSS 12\Resources directory
xcopy Resources %RESOURCESDIR% /e /y /i
Echo Copying Resource files to %WEBAPPDIR%\App_GlobalResources directory
xcopy App_GlobalResources %WEBAPPDIR%\App_GlobalResources /e /y /i
pushd %TEMPLATEDIR%\features
Echo Installing LiveCycle Connector with WSS
%STSADM% -o installfeature -filename LiveCycle\feature.xml -force
Echo Installing LiveCycle Workflow with WSS
%STSADM% -o installfeature -name LiveCycle/Workflow -force
Echo Activating LiveCycle Connector with WSS
%STSADM% -o activatefeature -filename LiveCycle\feature.xml -url %SITEURL% -force
Echo Activating LiveCycle Workflow with WSS
%STSADM% -o activatefeature -name LiveCycle/Workflow -url %SITEURL% -force
popd
Echo Restarting IIS worker process
IISRESET
set _my_datetime=%date% %time%
@echo on
echo End Installation at %_my_datetime%
@echo off
Error Log
E:\Adobe LiveCycle Connector-2007>set _my_datetime=Wed 08/22/2012 14:40:28.27
E:\Adobe LiveCycle Connector-2007>echo Begin Installation at Wed 08/22/2012 14:40:28.27
Begin Installation at Wed 08/22/2012 14:40:28.27
E:\Adobe LiveCycle Connector-2007>echo "Customize <VER> <PORT> <SharepointServerNameOrIP> <SiteDirectory> <siteName> in this install.bat . Verify gacutil.exe path."
"Customize <VER> <PORT> <SharepointServerNameOrIP> <SiteDirectory> <siteName> in this install.bat . Verify gacutil.exe path."
Failure adding assembly to the cache: Unknown Error
Failure adding assembly to the cache: Unknown Error
Failure adding assembly to the cache: Unknown Error
Deactivating LiveCycle Connector feature with WSS
Operation completed successfully.
Deactivating LiveCycle Workflow feature with WSS
Operation completed successfully.
Uninstalling LiveCycle Connector with WSS
Operation completed successfully.
Uninstalling LiveCycle Workflow with WSS
Operation completed successfully.
Copying source files to WSS \TEMPLATE directory
TEMPLATE\FEATURES\LiveCycle\Elements.xml
TEMPLATE\FEATURES\LiveCycle\Feature.xml
TEMPLATE\FEATURES\LiveCycle\Workflow\feature.xml
TEMPLATE\FEATURES\LiveCycle\Workflow\workflow.xml
TEMPLATE\IMAGES\LiveCycle\applyPolicy.png
TEMPLATE\IMAGES\LiveCycle\applyReaderExtn.png
TEMPLATE\IMAGES\LiveCycle\createPdf.png
TEMPLATE\IMAGES\LiveCycle\liveCycle.gif
TEMPLATE\IMAGES\LiveCycle\pdficon_small.gif
TEMPLATE\LAYOUTS\LiveCycle\ApplyPolicy.aspx
TEMPLATE\LAYOUTS\LiveCycle\ApplyReaderExtensions.aspx
TEMPLATE\LAYOUTS\LiveCycle\GeneratePDF.aspx
TEMPLATE\LAYOUTS\LiveCycle\InvokeGenericProcess.aspx
TEMPLATE\LAYOUTS\LiveCycle\LiveCycleSettings.aspx
TEMPLATE\LAYOUTS\LiveCycle\LoggingSettings.aspx
TEMPLATE\LAYOUTS\LiveCycle\Workflow\LCWorkflowSettings.aspx
16 File(s) copied
Copying Feature Resource files to WSS 12\Resources directory
Resources\AdobeLiveCycleConnectorCore.de-DE.resx
Resources\AdobeLiveCycleConnectorCore.de.resx
Resources\AdobeLiveCycleConnectorCore.en-US.resx
Resources\AdobeLiveCycleConnectorCore.en.resx
Resources\AdobeLiveCycleConnectorCore.fr-FR.resx
Resources\AdobeLiveCycleConnectorCore.fr.resx
Resources\AdobeLiveCycleConnectorCore.ja-JP.resx
Resources\AdobeLiveCycleConnectorCore.ja.resx
Resources\AdobeLiveCycleConnectorCore.resx
9 File(s) copied
Copying Resource files to "C:\Inetpub\wwwroot\wss\VirtualDirectories\80"\App_GlobalResources directory
App_GlobalResources\AdobeLiveCycleConnector.de-DE.resx
App_GlobalResources\AdobeLiveCycleConnector.de.resx
App_GlobalResources\AdobeLiveCycleConnector.en-US.resx
App_GlobalResources\AdobeLiveCycleConnector.en.resx
App_GlobalResources\AdobeLiveCycleConnector.fr-FR.resx
App_GlobalResources\AdobeLiveCycleConnector.fr.resx
App_GlobalResources\AdobeLiveCycleConnector.ja-JP.resx
App_GlobalResources\AdobeLiveCycleConnector.ja.resx
App_GlobalResources\AdobeLiveCycleConnector.resx
App_GlobalResources\AdobeLiveCycleWorkflow.de-DE.resx
App_GlobalResources\AdobeLiveCycleWorkflow.de.resx
App_GlobalResources\AdobeLiveCycleWorkflow.en-US.resx
App_GlobalResources\AdobeLiveCycleWorkflow.en.resx
App_GlobalResources\AdobeLiveCycleWorkflow.fr-FR.resx
App_GlobalResources\AdobeLiveCycleWorkflow.fr.resx
App_GlobalResources\AdobeLiveCycleWorkflow.ja-JP.resx
App_GlobalResources\AdobeLiveCycleWorkflow.ja.resx
App_GlobalResources\AdobeLiveCycleWorkflow.resx
18 File(s) copied
Installing LiveCycle Connector with WSS
Operation completed successfully.
Installing LiveCycle Workflow with WSS
Operation completed successfully.
Activating LiveCycle Connector with WSS
Operation completed successfully.
Activating LiveCycle Workflow with WSS
Operation completed successfully.
Restarting IIS worker process
Attempting stop...
Internet services successfully stopped
Attempting start...
Internet services successfully restarted
E:\Adobe LiveCycle Connector-2007>echo End Installation at Wed 08/22/2012 14:41:00.29
End Installation at Wed 08/22/2012 14:41:00.29
Waiting...
Regards,
Amol SahareThis might be an issue with the gacutil that you are using. I have used the gacutil that comes with Microsoft SDK.
You can install Microsoft SDK from http://www.microsoft.com/en-us/download/details.aspx?id=3138 -
Exchange account verified and configured for sync, but no messages show up
I think I'm having what appears to be, based on my reading of the threads on problems with Exchange set-up, a unique problem. Wondering if anyone else is in the same boat and has advice.
I am able to verify and configure my Exchange mail account for sync (using my company's OWA server), but when I go into the mail application I see only my mail folders. The e-mails themselves do not appear. When I tap on a folder to access the messages inside I get a blank screen and a "connecting" message on the bottom.
When I have SSL on, the phone continually prompts me for my password and no matter how many times I enter the correct password it tells me it's wrong. I later get a message that mail cannot be accessed or sent because the "username or password" for the account is incorrect.
When I turn SSL off, I don't get the password prompt, but my messages still don't appear. The phone goes through the whole "connecting" cycle and then says "updated" but there are no e-mails visible and I cannot send.
I was able to set up the account as IMAP but this requires fetching messages and I really want to be able to configure push using Exchange ActiveSync. The company that runs our work email server (we are a small business and don't house the server internally) says it has other iPhones up and running using ActiveSync and the same information I've entered, so they're stumped as to what the problem is.
Please help!!!
Thanks in advance.Justin - try this
For those of you experiencing problems using OWA through Exchange on iPhone, I may have found a solution. Symptoms I had and have read about -
1. You enter all your account information on iPhone (webmail.company.com, user name p-word, etc)
2. You can see only your folders on iPhone but with no emails inside them
3. you keep getting asked for your password on iPhone over and over
Maddening to get so close to only see folders. I fixed mine and the answer was right in front of my face the whole time. Before entering username and password on iPhone, the format of how it's supposed to be is ghosted - Domain\Name
When I was having the "folders only" issue I had username set up as Domain/Name
Turns out the slash is the difference, for me anyway. As soon I changed from front slash to back slash, entered my password (once) all my folders populated with emails. A miracle !
So to recap, here's my setup
Email - [email protected]
Server - [email protected]
Username - companyorg\name
Password - normal outlook password
Description - My Email Account
Use SSL - ON
I know there are many variations with Exchange and OWA depending on server setup, but the moral my story is back slash instead of front slash in the Domain\username field -
Join us at 1:00pm Pacific time for a LIVE video tutorial of how to replace a video card and configure video settings! The video features HP experts who work with the products every day!
I am an HP employee.#test
Maybe you are looking for
-
Can I send a preview of an iWeb website to a PC user prior to going live?
I have a completed site in iWeb that needs to be previewed by another member of my group prior to publishing the site live. He is a PC user. Is there a way to show him a preview of the site prior to uploading it to ftp and going live? thanks! Todd
-
I just updated to6.1.3 and now my wifi button is greyed out. Apple support said it is a hardware issue. Funny how it worked just fine on the previous iOS. Now apple wants me to buy a replace not because my warranty expired 09/12. Seems to me like ios
-
Pricing unit in condition type..
Hi folks, I have a problem with " pricing unit". Iam using condition type EK01 . Under normal circumstance, the pricing unit takes the value of 1.. Suddenly, it is taking 100 as value. Can anyone give a clue from where this, Pricing Unit picks thi
-
My iphone 3gs's screen is freeze with the apple logo, how can I fix it?
I need a solution as soon as possible. I'm going to loose all the data?
-
Hi, We are trying to install EPM in our concern, and I am trying to do a server configuration document. I understand the standard deployment says to put everything in Windows, But we are looking to put in a mixture of OS. (everything 64 bit) Right n