Console SCCM 2012 R2

Hi
I have SCCM 2012 R2 CU4 on Windows 2012 with SQL 2012. (No problem)
I go to Windows 7, open session and install "SCCM 2012 R2 Console" after installation i go to "Control Panel" , "uninstall programs" and in the list "Microsoft Report Viewer 2010 " English, French, Ita, etc... Why?
Thanks

Hi
I also had this, when i installed the ConfigMgr 2012 R2 Console on our old Management Server (2008 R2). I just uninstalled all Report Viewer Language Packs which i knew, i wouldn't use them. That worked for me without any Problems.
Strange Thing is, on our new Management Server (2012 R2) there is only one entry listed "Microsoft ReportViewer 2010 SP1 Redistributable" without any language packs.
Best regards, Simon

Similar Messages

SCCM 2012 Console - slow performance when browsing in Applications Deployments

Hi There,
we are experiencing a slow Console (SCCM 2012 R2 CU1, one Primary) if we go to Software Library > Applications and than clicking on Deployments. It takes up to 2 Minutes if we get results of the Deployments which depend to the Application. It Doesn´t
matter if there are 0 or 20 Deployments.
It only occurs if the SCCM Admins do not have full Admin rights in SCCM.
The reason must be the Security Scopes, because all Admins have full rights to be a "Application Deployment Manager".
Can somebody help me to get rid of this Problem?
Regards
Florian

Hello Joyce,
thanks for the tip! I can see this Query in SMSProv.Log, if i click on the Register Deployment at the Application. Here it takes about two minutes:
Execute SQL =select all SMS_DeploymentSummary.AssignmentID,SMS_DeploymentSummary.CI_ID,SMS_DeploymentSummary.CollectionID,SMS_DeploymentSummary.CollectionName,SMS_DeploymentSummary.CreationTime,SMS_DeploymentSummary.DeploymentID,SMS_DeploymentSummary.DeploymentIntent,SMS_DeploymentSummary.DeploymentTime,SMS_DeploymentSummary.DesiredConfigType,SMS_DeploymentSummary.EnforcementDeadline,SMS_DeploymentSummary.FeatureType,SMS_DeploymentSummary.ModelName,SMS_DeploymentSummary.ModificationTime,SMS_DeploymentSummary.NumberErrors,SMS_DeploymentSummary.NumberInProgress,SMS_DeploymentSummary.NumberOther,SMS_DeploymentSummary.NumberSuccess,SMS_DeploymentSummary.NumberTargeted,SMS_DeploymentSummary.NumberUnknown,SMS_DeploymentSummary.ObjectTypeID,SMS_DeploymentSummary.PackageID,SMS_DeploymentSummary.PolicyModelID,SMS_DeploymentSummary.ProgramName,SMS_DeploymentSummary.SoftwareName,SMS_DeploymentSummary.SummarizationTime,SMS_DeploymentSummary.SummaryType
from fn_DeploymentSummary(1031) AS SMS_DeploymentSummary where (((SMS_DeploymentSummary.DeploymentID in (select all SUIP0.ObjectKey from RBAC_InstancePermissions AS SUIP0 where (SUIP0.AdminID in (16777219,16777243,0) AND ((GrantedOperations&1)
= 1 AND SUIP0.ObjectTypeID in (200)))) AND SMS_DeploymentSummary.ObjectTypeID in (200)) OR (SMS_DeploymentSummary.DeploymentID in (select all SUIP0.ObjectKey from RBAC_InstancePermissions AS SUIP0 where (SUIP0.AdminID in (16777219,16777243,0) AND
((GrantedOperations&1) = 1 AND SUIP0.ObjectTypeID in (201)))) AND SMS_DeploymentSummary.ObjectTypeID in (201))) AND SMS_DeploymentSummary.ModelName = N'ScopeId_74CC6EA1-E5C5-4424-B8EF-DDE952A3FC7A/Application_5661d887-1908-4565-8da0-097430692825') order
by SMS_DeploymentSummary.DeploymentTime SMS Provider 25.11.2014 08:19:43 7244 (0x1C4C)
Those Entries will be generated SMSAdminUI.Log
[7, PID:6880][11/25/2014 08:19:43] :The performance counter '# WQL queries active' was not found
[7, PID:6880][11/25/2014 08:19:43] :The performance counter '# WQL queries active' was not found
Regards
Florian

Getting "Error: 0x80070654" when trying to install SCCM 2012 R2 Console from Software Center

What I did:
Created a Package Source share on the Site Server
Gave the Package Source Share the following Share permissions: SCCM Admins: Full Control, Domain Computers: Full Control, Local Admins: Full Control.
Copied the "Program Files\Microsoft Configuration Manager\tools\ConsoleSetup" folder to my package source (Since the Package Source is actually on the site server, I just copied the ConsoleSetup folder to it that is on the same drive)
Created a package and a Standard Program
Command line: ConsoleSetup.exe
I deploy it to my collection
Run Machine Policy and Reevaluation on my Right Click Tools
Go to one of my clients and open up Software Center and click the Install button
It fails with ""Error: 0x80070654"
I open up execmgr.log on the client using CMTrace and I use the error lookup tool and it shows that the 0x80070654 error is "This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer
package"
I also see a red highlighted line in the execmgr.log file with the following entry: "Script for Package:PRI00013, Program: SCCM 2012 R2 Management Console failed with exit code 2147944020"
I can run ConsoleSetup.exe using a command line to the package source.
Execmgr.log Contents
Policy arrived for parent package PRI00013 program SCCM 2012 R2 Management Console
execmgr 7/31/2014 2:40:48 AM
3336 (0x0D08)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 6l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:40:48 AM
3336 (0x0D08)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramOfferReceivedEvent
AdvertisementId = "PRI2000A";
ClientID = "GUID:C83A938E-8BD7-4207-A450-11B3FE063DD6";
DateTime = "20140731094048.938000+000";
MachineName = "My Computer";
ProcessID = 1548;
SiteCode = "PRI";
ThreadID = 3336;
execmgr
7/31/2014 2:40:48 AM 3336 (0x0D08)
Raising client SDK event for class NULL, instance NULL, actionType 6l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:40:48 AM
3568 (0x0DF0)
Validating chain of dependent programs for package PRI00013 optional program SCCM 2012 R2 Management Console
execmgr 7/31/2014 2:41:04 AM
4612 (0x1204)
Validating package PRI00013 program SCCM 2012 R2 Management Console in the chain. The content request ID is {00000000-0000-0000-0000-000000000000}
execmgr 7/31/2014 2:41:04 AM
4612 (0x1204)
Creating an optional execution request for package PRI00013 program SCCM 2012 R2 Management Console
execmgr
7/31/2014 2:41:04 AM 4612 (0x1204)
Requesting content from CAS for package PRI00013 version 1
execmgr 7/31/2014 2:41:05 AM
4612 (0x1204)
Successfully created a content request handle {CBABEBB0-D019-4421-8B2E-47ABF90A925F} for the package PRI00013 version 1
execmgr 7/31/2014 2:41:05 AM
4612 (0x1204)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistWaitingContentEvent
AdvertisementId = "PRI2000A";
ClientID = "GUID:C83A938E-8BD7-4207-A450-11B3FE063DD6";
DateTime = "20140731094105.334000+000";
MachineName = "My Computer";
PackageName = "PRI00013";
PackageVersion = "1";
ProcessID = 1548;
ProgramName = "SCCM 2012 R2 Management Console";
SiteCode = "PRI";
ThreadID = 4612;
execmgr
7/31/2014 2:41:05 AM 4612 (0x1204)
Successfully raised SoftDistWaitingContentEvent event for program SCCM 2012 R2 Management Console
execmgr 7/31/2014 2:41:05 AM
4612 (0x1204)
Execution Request for advert package PRI00013 program SCCM 2012 R2 Management Console state change from NotExist to WaitingContent
execmgr 7/31/2014 2:41:05 AM
4612 (0x1204)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:05 AM
4612 (0x1204)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:05 AM
5072 (0x13D0)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:05 AM
4260 (0x10A4)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:05 AM
4756 (0x1294)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:05 AM
4756 (0x1294)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:05 AM
5072 (0x13D0)
Processing [{CBABEBB0-D019-4421-8B2E-47ABF90A925F}, 0]: OnContentAvailable
execmgr
7/31/2014 2:41:10 AM 4756 (0x1294)
[{CBABEBB0-D019-4421-8B2E-47ABF90A925F}]: Content Version 1 is available for advert , pkg: PRI00013, program SCCM 2012 R2 Management Console.
execmgr 7/31/2014 2:41:10 AM
4756 (0x1294)
An existing MTC token was not supplied, using ExecutionRequest's Id as MTC token and this execution request is the owner of resultant MTC task.
execmgr 7/31/2014 2:41:10 AM
4756 (0x1294)
Request a MTC task for execution request of package PRI00013, program SCCM 2012 R2 Management Console with request id: {C9942D47-8A99-4363-AE69-A6F813336239}
execmgr 7/31/2014 2:41:10 AM
4756 (0x1294)
Execution Request for advert package PRI00013 program SCCM 2012 R2 Management Console state change from WaitingContent to Ready
execmgr 7/31/2014 2:41:10 AM
4756 (0x1294)
MTC task with id {C9942D47-8A99-4363-AE69-A6F813336239}, changed state from 0 to 4
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:10 AM
4756 (0x1294)
Processing [{CBABEBB0-D019-4421-8B2E-47ABF90A925F}, 0]: RemoveNotification
execmgr 7/31/2014 2:41:10 AM
4756 (0x1294)
MTC signaled SWD execution request with program id: SCCM 2012 R2 Management Console, package id: PRI00013 for execution.
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Sending ack to MTC for task with id: {C9942D47-8A99-4363-AE69-A6F813336239}
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Executing program ConsoleSetup.exe in Admin context
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Execution Request for advert package PRI00013 program SCCM 2012 R2 Management Console state change from Ready to NotifyExecution
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Checking content location C:\Windows\ccmcache\eo for use
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Successfully selected content location C:\Windows\ccmcache\eo
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Executing program as a script execmgr
7/31/2014 2:41:10 AM 4328 (0x10E8)
Successfully prepared command line "C:\Windows\ccmcache\eo\ConsoleSetup.exe"
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Command line = "C:\Windows\ccmcache\eo\ConsoleSetup.exe", Working Directory = C:\Windows\ccmcache\eo\
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Running "C:\Windows\ccmcache\eo\ConsoleSetup.exe" with 32bitLauncher
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Created Process for the passed command line
execmgr 7/31/2014 2:41:11 AM
4328 (0x10E8)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramStartedEvent
AdvertisementId = "PRI2000A";
ClientID = "GUID:C83A938E-8BD7-4207-A450-11B3FE063DD6";
CommandLine = "\"C:\\Windows\\ccmcache\\eo\\ConsoleSetup.exe\"";
DateTime = "20140731094111.028000+000";
MachineName = "My Computer";
PackageName = "PRI00013";
ProcessID = 1548;
ProgramName = "SCCM 2012 R2 Management Console";
SiteCode = "PRI";
ThreadID = 4328;
UserContext = "NT AUTHORITY\\SYSTEM";
WorkingDirectory = "C:\\Windows\\ccmcache\\eo\\";
execmgr
7/31/2014 2:41:11 AM 4328 (0x10E8)
Raised Program Started Event for Ad:PRI2000A, Package:PRI00013, Program: SCCM 2012 R2 Management Console
execmgr 7/31/2014 2:41:11 AM
4328 (0x10E8)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:11 AM
4328 (0x10E8)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:11 AM
4328 (0x10E8)
MTC task with id {C9942D47-8A99-4363-AE69-A6F813336239}, changed state from 4 to 5
execmgr 7/31/2014 2:41:11 AM
4612 (0x1204)
Program exit code -2147023276 execmgr
7/31/2014 2:41:11 AM 4756 (0x1294)
Looking for MIF file to get program status execmgr
7/31/2014 2:41:11 AM 4756 (0x1294)
Script for Package:PRI00013, Program: SCCM 2012 R2 Management Console failed with exit code 2147944020
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramErrorEvent
AdvertisementId = "PRI2000A";
ClientID = "GUID:C83A938E-8BD7-4207-A450-11B3FE063DD6";
DateTime = "20140731094111.506000+000";
ExitCode = "-2147023276";
MachineName = "My Computer";
PackageName = "PRI00013";
ProcessID = 1548;
ProgramName = "SCCM 2012 R2 Management Console";
SiteCode = "PRI";
ThreadID = 4756;
UserContext = "NT AUTHORITY\\SYSTEM";
execmgr
7/31/2014 2:41:11 AM 4756 (0x1294)
Raised Program Error Event for Ad:PRI2000A, Package:PRI00013, Program: SCCM 2012 R2 Management Console
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
Execution is complete for program SCCM 2012 R2 Management Console. The exit code is -2147023276, the execution status is FailureNonRetry
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
Requesting MTC to delete task with id: {C9942D47-8A99-4363-AE69-A6F813336239}
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
MTC task with id: {C9942D47-8A99-4363-AE69-A6F813336239} deleted successfully.
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 10l, value Result:FALSE, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
Requesting MTC to delete task with id: {C9942D47-8A99-4363-AE69-A6F813336239}
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
This execution request does not have a corresponding task in MTC.
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
CServiceWindowEventHandler::Execute - Received SERVICEWINDOWEVENT : END Event
execmgr 7/31/2014 5:00:00 AM
2928 (0x0B70)
Thanks

Cool, mate it is then.
Yeah it either changed or there is a typo.
I re-created everything and I still get that same 0x80070654 error.
This is really frustrating
Anyway, here is what I see in the AppEnforce.log:
+++ Starting Install enforcement for App DT "SCCM 2012 R2 Management Console" ApplicationDeliveryType - ScopeId_DF08DF3D-39F7-4840-B17C-92FCAB02F116/DeploymentType_00b14782-2bc3-4c88-bc19-9d12981bc4ef, Revision - 1, ContentPath - C:\Windows\ccmcache\ev,
Execution Context - System AppEnforce
7/31/2014 11:27:30 PM 4256 (0x10A0)
A user is logged on to the system.
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Performing detection of app deployment type SCCM 2012 R2 Management Console(ScopeId_DF08DF3D-39F7-4840-B17C-92FCAB02F116/DeploymentType_00b14782-2bc3-4c88-bc19-9d12981bc4ef, revision 1) for system.
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
+++ Application not discovered. [AppDT Id: ScopeId_DF08DF3D-39F7-4840-B17C-92FCAB02F116/DeploymentType_00b14782-2bc3-4c88-bc19-9d12981bc4ef, Revision: 1]
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
App enforcement environment:
Context: Machine
Command line: consolesetup.exe /q TargetDir="%ProgramFiles%\ConfigMgr" EnableSQM=0 DefaultSiteServerName=my.site.server
Allow user interaction: No
UI mode: 1
User token: null
Session Id: 2
Content path: C:\Windows\ccmcache\ev
Working directory:
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Prepared working directory: C:\Windows\ccmcache\ev
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Prepared command line: "C:\Windows\ccmcache\ev\ConsoleSetup.exe" /q TargetDir="C:\Program Files\ConfigMgr" EnableSQM=0 DefaultSiteServerName=my.site.server
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Executing Command line: "C:\Windows\ccmcache\ev\ConsoleSetup.exe" /q TargetDir="C:\Program Files\ConfigMgr" EnableSQM=0 DefaultSiteServerName=my.site.server with user context
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Working directory C:\Windows\ccmcache\ev
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Post install behavior is BasedOnExitCode
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Waiting for process 2792 to finish. Timeout = 120 minutes.
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Process 2792 terminated with exitcode: 2147944020
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Looking for exit code -2147023276 in exit codes table...
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Unmatched exit code (2147944020) is considered an execution failure.
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
++++++ App enforcement completed (0 seconds) for App DT "SCCM 2012 R2 Management Console" [ScopeId_DF08DF3D-39F7-4840-B17C-92FCAB02F116/DeploymentType_00b14782-2bc3-4c88-bc19-9d12981bc4ef], Revision: 1, User SID: ] ++++++
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)

Connect via Windows Powershell in SCCM 2012 CONSOLE (with PowerShell 4.0 installed)

Hi,
When trying to "Connect via Windows Powershell" in the SCCM 2012 console, I get the message that Powershell 3.0 is not installed... (which actually isn't installed, we have PS4.0 installed). Do we need to install PS3.0 also to get it working
or is there a workaround? Connecting manually to the site via Powershell 4.0 (Get-Psdrive -psprovider CMSITE) works like a charm.
Regards,
WiM

Hi,
I have installed WMF 4.0 on Windows Server 2008 R2 sp1, it works fine.
Please try to use "$PSVersionTable" to confirm Powershell version is 4.0. At first, I forgot to install Microsoft .NET Framework 4.5, then the console gave me the message that Powershell 3.0 is not installed.
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCCM 2012 R2 CU3 UPGRADE BROKE REMOTE ADMIN CONSOLE CONNECTIVITY

I installed SCCM 2012 R2 CU3 on my site server but it broke a couple things. I've never had problems with SCCM upgrades before. The admin console works if you log into the site server and run it from there but not when you try it from anywhere else (another
server or a workstation). When you open the admin console on the site server it does have the new version of 5.00.7958.1401. Of the five suggestions that appear when your console won't connect, here's what I know:
1) the remote machines can all ping the site server (call it server 01)
2) we know it's not my account that's a problem as I can open the console on the site server itself
3) This problem happens on server 02, which I put the new admin console on. It also happens with other machines which still have the CU2 console
4) Yes, I'm an admin role, shown by logging into the console on the site server
5) I have another network where everything works. I have not put CU3 on it yet, of course. The WMI permissions on Root, Root\SMS, and Root\SMS\site_ABC are identical on both site servers yet it works on non-upgraded one and not on the upgraded one.
WMI info-I can WMI connect from the site server to these other machines but not WMI connect from the other machines to the site server: not root, SMS, or SMS\site_ABC, nor cimv2, even though the permissions match what is on the working network.
When I launch the console from the site server entries about loading the console loading ok are in SMSAdminUI.log, but when I try to launch the console from other machines no entries are made, even though I changed the SmsAdminSNapIN value to VERBOSE.
I checked DCOM permissions and they are the same on both networks.
Another issue that appeared with this upgrade: I can install the client upgrade to CU3 on other machines but on the site server it fails with "Internal Error 2503" and when you click OK it you get "Internal Error 2502".
Ben JohnsonWY

I'd suspected this WMI problem was only affecting our Server 2012 boxes. I compared RSOPs and noticed the ones having this problem were all under the same OU and getting few GPOs. Our GPO person found a GPO that has somehow become unlinked. He relinked
it. After a gpo update AND a reboot these machines start working again. So CU3 did not cause this WMI after all.
And yes, the CU2 consoles won't connect to a CU3 site server, you have to run the console upgrade.
I fixed the "internal error 2503/2502" by doing this: open task manager, click details, end the explorer task (screen will look blank at first). Click File and select "start new task", enter "explorer.exe' and click the run as admin
button. The msp for CU3 client installed and the screen looks normal again. I only saw this error on the site server and have never seen it before.
Ben JohnsonWY

SCCM 2012 R2 CU2 Admin Console Connects But Closes In A Few Seconds

I built a new SCCM 2012 R2 CU2 suite on Server 2012 R2. There are four servers: site server, secondary DP, WSUS/SUP, and a SQL server. On the first three the SCCM Admin Console will open. But when logged into the SQL server, the Admin Console opens
for a couple seconds, then closes. The SQL box can connect via wbemtest to
\\server\root\sms\site_ABC. I have checked all the items that show on the screen when your console won't connect. There are no errors in the smsprovl.log on the site server. I think this problem is on the SQL server.
This is one of three problems I've had a lot of difficulty with on this network. I'm making separate threads for all three
Ben JohnsonWY

I have been able to verify this problem generates 4 entries in Event Viewer/System logs. In the order they get generated by first in time:
1st - A fatal error was generated and sent to a remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 43. The Windows Schannel error state is 552.
2nd - The certificate received from the remote server does not contain the expected name. It is therefore not possible to determine whether we are connecting to the correct server. The server name we were expecting was (the IP of the SQL server). The
SSL connection request has failed. The attached data contains the server certificate.
3rd - DCOM was unable to communicate with the server servername.fqdn using any of the configured protocols; requested by PID 3cb8 (C:Program Files (x86)\Microsoft Configuration Manager\AdminConsole\bin\Microsoft.ConfigurationManagement.exe)
4th - an exact repeat of the 3rd entry.
Ben JohnsonWY

Reports don't show on SCCM 2012 SP1 Console

Hello everyone,
We are encountering a strange issue with the SCCM 2012 reporting services. I was creating a custom report earlier. At some point, and I don't know exactly how, I could not open the Reports hive on the 'Monitoring' wunderbar. No reports load in the console.
When I right-click "Reports" and choose "Create Report" it throws up an error "The request failed with HTTP status 401: Unauthorised".
When the above happens, what I see is that the report services service account keep getting locked out.
I can open both http://RerportingServicesServer/Reports ad well as http://RerportingServicesServer/ReportServer using the service account (when not locked) to see the reports but I can not launch 'Report Builder' option.
It's really strange. Looks as if the SCCM console is wrongly passing the stored service account while connecting to the reporting service.
The rest of the SCCM appears to be fine. The SQL services appear to be running fine (i.e. they are not stopped).
Any idea?

Hi all. Apologies for not getting back sooner. The issue hasn't gone away, instead I am using a workaround.
It appears to be a bug in the console to me. It looks like the problem is confined to my own account where as for other user accounts, the Reports do appear on the console on the same server.
As far as I remember (it was a while back;)) the problem originally occurred when I had opened the Report Builder (select report -> Right-click edit) it prompted me for logon credentials where I entered the report service service account which
has permissions to create/edit reports (but I also selected "save windows credentials" at that time which I think is the problem). It is since then things appear to be going wrong for my account. Now when I access the Reports folder on the console, the reports
don't appear. When I right-click to create report, the above "The request failed with HTTP status 401: Unauthorised" error appears. And then I notice that the report services service
account (which I had entered initially several days ago before the error had first occurred) gets locked out. It looks like the Admin console is trying to pass the corrupt(?) Report service service account credentials to the Reports module and
that's where the problem lies. Though I could be wrong.

SCCM 2012: enable powershell execution policy for SCCM 2012 console

Hi,
I always get stuck settings up the remote sccm 2012 powershell (cd psdrive sitecode:). Maybe not a real sccm 2012 question but Powershell but wonder what steps you take to make it work (it works on our production environment, setting up in a lab always gives
me headaches, will defintely write the solution down this time :-)).
Please advise what the steps are in configuring remote powershell for SCCM 2012.
1.my personal account "Myuser" has admin-rights in sccm 2012
2.I can open Powershell logged on to the sccm 2012 server then opening sccm 2012 console, connect via powershell
3.however, when I connect remote to the sccm server, I get the error:
. : File C:\Users\Myuser\Documents\WindowsPowerShell\Microsoft.PowerShell_profile.ps1 cannot be loaded. The file C:\Use
rs\MyUser\Documents\WindowsPowerShell\Microsoft.PowerShell_profile.ps1 is not digitally signed. You cannot run this scr
ipt on the current system. For more information about running scripts and setting execution policy, see about_Execution
_Policies at http://go.microsoft.com/fwlink/?LinkID=135170.
4.So I connect to the sccm-server and ask for the execution policy to unrestricted, I get this:
set-executionpolicy unrestricted
[Y] Yes [N] No [S] Suspend [?] Help (default is "Y"): y
Set-ExecutionPolicy : Windows PowerShell updated your execution policy successf
ully, but the setting is overridden by a policy defined at a more specific scope
There is no policy which sets any powershell configs.
Please advise.
J.
Jan Hoedt

Those client settings are only for the actions performed by the ConfigMgr client. Normal PowerShell actions are restricted to the configured execution policy on the machine.
Have a look at this post:
http://blogs.msdn.com/b/pasen/archive/2011/12/07/set-executionpolicy-windows-powershell-updated-your-execution-policy-successfully-but-the-setting-is-overridden-by-a-policy-defined-at-a-more-specific-scope.aspx
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

SCCM 2012 Client was removed but SCCM console still showing the status as "Yes"

Hi,
In a VM, SCCM 2012 client agent was removed and the VM was reverted back to a clean machine. SCCM console still shows the status as "Yes" even after the client agent was removed. Heartbeat Discovery is set to run every 1 hour.
Please guide on this.
Regards, Lorin Davis

It's kind like a person dying (sorry to be a bit morbid) -- how does the phone company know the person died? The dead person certainly can't tell them and the phone company doesn't query every person it services and ask them "are you alive?"
Thus, someone else must notify them of the person's passing. This is no different than a client agent "dying" in ConfigMgr. A ConfigMgr site never initiates communication with clients and thus something else needs to tell the site that the client
agent is dead. You! Or, an automated process (as Torsten mentioned) that goes through automatically marks a client as "dead" that hasn't been heard from in x number of days.
Jason | http://blog.configmgrftw.com | @jasonsandys

SCCM 2012 R2 CU2 Update - Need to update console or clients as well?

Hi,
I am going to be installing the following update onto out SCCM 2012 server:
http://support.microsoft.com/kb/2970177/en-us
I am not 100% sure but is there a need to update all installed consoles and/or all sccm clients after the CU2 installation?

Site server, console and clients needs to be updated.
Full installation guide : http://www.systemcenterdudes.com/sccm-2012-r2-cu2-installation-guide/

SCCM 2012 clients in SCCM 2007 console

Hi
If a Windows 7 system has sccm 2012 client installed, will it get discovered in SCCm 2007 console.
Regards Sushain KApoor

If you enable AD discovery to this client, the client object will be discovered. Anyway, the SCCM 2012 clients cannot be managed by SCCM 2007. See below.
Configuration Manager also checks that you have assigned the Configuration Manager 2012 client to a site that supports the Configuration Manager client version. If you have used automatic site assignment and the client is assigned to a Configuration Manager
2007 site, the client automatically tries to find a Microsoft System Center Configuration Manager 2012 site. It first checks Active Directory Domain Services and if this is not successful (for example, the Active Directory schema is not extended or the computer
is a workgroup client), the client then checks for site information from its assigned management point. However, if the client was assigned with a specific site code and assigns to a Configuration Manager 2007 site, site assignment fails and you must manually
reassign the client to a Microsoft System Center Configuration Manager 2012 site.
Juke Chou
TechNet Community Support

SCCM 2012 Console not showing Updates under Monitoring\Deployments tab

Howdie,
Has anyone ran into this problem? When I go to Monitoring -> Deployments tab in SCCM 2012 console it will show only applications and programs. Update ones are displayed only after 6-8 minutes. The issue is the same in all of our locations
around the world, any hint or this?
Thanks in advance for help

Hi,
You could run the DBCC Showcontig to validate the current fragmentation.
Reference:
http://blogs.technet.com/b/smartinez/archive/2014/03/28/talking-database-in-configmgr.aspx
(Now I cannot unpropose the answer too-unexpected error.)
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Sccm 2012 r2 console, devices, column layout and order is reset to default

Hi :)
I am running sccm 2012 r2 console on sccm server. I've added some columns into Assets and Management, Devices (beside default name, client, site code, client activity) ie. client version, endpoint protection enabled etc. I've left console open up and running
and after some when I get back, column layout is reset to default 4 columns :(
Can you fix please that system center consoles remember column layout and order ? (sc vmm 2012 r2 does not remember only when you add column maximum memory). :(

This has to be something to do with the consolesettings.dat file. Do you have folder redirection set up on the AppData\Roaming folder? I have managed to recreate your issue using the following method:
1. Add in some columns to the Devices view.
2. Go to the \\server\username\AppData\Roaming\Microsoft\ConfigMgr10 and deleted the consolesettings.dat file.
3. Relaunced the console and the columns have reset to default.
4. Set the columns again, closed down the console and the .dat file is recreated.
5. Re launch the SCCM console and the settings are retained.
I suggest you check either the C:\Users\%username%\AppData\Roaming\Microsoft\ConfigMgr10\consolesettings.dat. or \\server\username\AppData\Roaming\Microsoft\ConfigMgr10\consolesettings.dat and the time stamp of the file. Do some tests and recreate
the steps above.
Somewhere along the line your dat file is being removed with your bespoke settings.
Cheers
Paul | sccmentor.wordpress.com

How many SCCM 2012 consoles are supported

Hello,
I have been asked to determine how many SCCM 2012 consoles we can run in our environment. We have a large number of support staff (100+) that need to have access to Remote Tools and possibly some Collections for application deployment.
I didn't see anything from my quick search on TechNet or the web about this issue.
Also, is there any web console (or similar) that can be used, instead of giving access to the console?
Any help would be appreciated.
Thanks
Angelo
Angelo

There is no limit that I know of. The only limitation would be the server hardware. If giving support staff access to the console worries you, you can use other means.
1. Give users just the remote control/remote tool apps
2. Link collection to security groups and allow support staff to modify the groups.
If my answer helped you, check out my blog:
DeployHappiness. Subscribe by
RSS or
email.

SCCM 2012 Installing Admin console on Windwos 7

I have installed SCCM 2012 Admin Console on a Windows 7 machine. The console installed fine by I'm now receiving this error.
This is from the SmsAdminUI.log
[5, PID:14908][04/03/2014 16:17:57] :Property: 'Features'\r\nSystem.Management.ManagementException\r\nNot found \r\n   at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
   at System.Management.PropertyData.RefreshPropertyInfo()
   at System.Management.PropertyDataCollection.get_Item(String propertyName)
   at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObjectBase.get_Item(String name)\r\nManagementException details:
[5, PID:14908][04/03/2014 16:17:57] :ReadExtraProperties: Failed to initialize extra properties
[5, PID:14908][04/03/2014 16:17:57] :Transport error; failed to connect, message: 'The Configuration Manager Administrator console could not connect to the Configuration Manager site database. Verify the version of the console is compatible with the version
of the site server you are connecting to and then try to connect again.'\r\nMicrosoft.ConfigurationManagement.ManagementProvider.SmsConnectionWithDetailException\r\nThe Configuration Manager Administrator console could not connect to the Configuration Manager
site database. Verify the version of the console is compatible with the version of the site server you are connecting to and then try to connect again.\r\n   at Microsoft.ConfigurationManagement.AdminConsole.SmsSiteConnectionNode.ValidateConnectionParameters(ConnectionManagerBase
connection)
   at Microsoft.ConfigurationManagement.AdminConsole.SmsSiteConnectionNode.GetConnectionManagerInstance(String connectionManagerInstance)\r\nNo details are available for this error.\r\n
Ideas on what is broke. I have tried with the firewall on and off made no difference.

Hi,
[5, PID: 14908][04/03/2014 16:17:57]: Transport error; failed to connect, message: 'The Configuration Manager Administrator console could not connect to the Configuration Manager site database.
Based on the log, I recommend you use the following way to test SQL connectivity.
You can use a UDL file to test various connectivity scenarios, create a simple text file, rename the extension from TXT to UDL, fill out the necessary information on the connection tab then test the connection, and troubleshoot as necessary
if it fails to connect.
For more information, please review the link below:
The easy way to test SQL connectivity
http://blogs.technet.com/b/michaelgriswold/archive/2014/01/06/the-easy-way-to-test-sql-connectivity.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Console SCCM 2012 R2

Similar Messages

Maybe you are looking for