Connect via Windows Powershell in SCCM 2012 CONSOLE (with PowerShell 4.0 installed)

Hi,
When trying to "Connect via Windows Powershell" in the SCCM 2012 console, I get the message that Powershell 3.0 is not installed... (which actually isn't installed, we have PS4.0 installed). Do we need to install PS3.0 also to get it working
or is there a workaround? Connecting manually to the site via Powershell 4.0 (Get-Psdrive -psprovider CMSITE) works like a charm.
Regards,
WiM

Hi,
I have installed WMF 4.0 on Windows Server 2008 R2 sp1, it works fine.
Please try to use "$PSVersionTable" to confirm Powershell version is 4.0. At first, I forgot to install Microsoft .NET Framework 4.5, then the console gave me the message that Powershell 3.0 is not installed.
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

SCCM 2012 Console (SP1 with CU4)

I am trying to package the SCCM 2012 console (with SP1) and with and without CU4. Both packages give me the following error in the event log. 'the virtual application.....could not be started because the App-V subsystem 'Virtual FileSystem' could not
be initialized....'
I've re-sequenced the app, had another package create a different package too and both get the same error.

Hello,
See this article on howto enable more extensive debug-logs;
http://www.tmurgent.com/TMBlog/?p=1247
Nicke Källén | The Knack| Twitter:
@Znackattack

SCCM 2012: enable powershell execution policy for SCCM 2012 console

Hi,
I always get stuck settings up the remote sccm 2012 powershell (cd psdrive sitecode:). Maybe not a real sccm 2012 question but Powershell but wonder what steps you take to make it work (it works on our production environment, setting up in a lab always gives
me headaches, will defintely write the solution down this time :-)).
Please advise what the steps are in configuring remote powershell for SCCM 2012.
1.my personal account "Myuser" has admin-rights in sccm 2012
2.I can open Powershell logged on to the sccm 2012 server then opening sccm 2012 console, connect via powershell
3.however, when I connect remote to the sccm server, I get the error:
. : File C:\Users\Myuser\Documents\WindowsPowerShell\Microsoft.PowerShell_profile.ps1 cannot be loaded. The file C:\Use
rs\MyUser\Documents\WindowsPowerShell\Microsoft.PowerShell_profile.ps1 is not digitally signed. You cannot run this scr
ipt on the current system. For more information about running scripts and setting execution policy, see about_Execution
_Policies at http://go.microsoft.com/fwlink/?LinkID=135170.
4.So I connect to the sccm-server and ask for the execution policy to unrestricted, I get this:
set-executionpolicy unrestricted
[Y] Yes [N] No [S] Suspend [?] Help (default is "Y"): y
Set-ExecutionPolicy : Windows PowerShell updated your execution policy successf
ully, but the setting is overridden by a policy defined at a more specific scope
There is no policy which sets any powershell configs.
Please advise.
J.
Jan Hoedt

Those client settings are only for the actions performed by the ConfigMgr client. Normal PowerShell actions are restricted to the configured execution policy on the machine.
Have a look at this post:
http://blogs.msdn.com/b/pasen/archive/2011/12/07/set-executionpolicy-windows-powershell-updated-your-execution-policy-successfully-but-the-setting-is-overridden-by-a-policy-defined-at-a-more-specific-scope.aspx
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

I recently bought an Ipod touch 2nd gen, (Ebay). It's in great shape and seemed to be wiped clean. When I connect (via windows computer) to Itunes with usb cord the Ipod icon shows, but the only function you can do is eject. When its in the upper right h

I recently bought an Ipod touch 2nd gen, (Ebay). It's in great shape and seemed to be wiped clean.
When I connect (via windows computer) to Itunes with usb cord the Ipod icon shows, but the only function you can do is eject. When its in the upper right hand corner and you click on it all you get is a done button, when it's in the side bar right click and your only option is eject, left click has no effect. If I go to "file">devices it's as if there are no devices connected.
I purchased a song with Itunes on the Ipod itself, and it transferred to my library on the computer automatically .
I have an Iphone 5 and a nano that are still functioning with Itunes thru computer so I'm thinking the issue is with the Ipod touch. I've reset it several times, rebooted it, with no change.
nothing on the internet has helped, I called tech support and got disconnected. Should I take it to a retail store? I just don't know where to go next, I'm of course willing to pay for tech or repair. looking for suggestions.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

SCCM 2012 Console not showing Updates under Monitoring\Deployments tab

Howdie,
Has anyone ran into this problem? When I go to Monitoring -> Deployments tab in SCCM 2012 console it will show only applications and programs. Update ones are displayed only after 6-8 minutes. The issue is the same in all of our locations
around the world, any hint or this?
Thanks in advance for help

Hi,
You could run the DBCC Showcontig to validate the current fragmentation.
Reference:
http://blogs.technet.com/b/smartinez/archive/2014/03/28/talking-database-in-configmgr.aspx
(Now I cannot unpropose the answer too-unexpected error.)
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How many SCCM 2012 consoles are supported

Hello,
I have been asked to determine how many SCCM 2012 consoles we can run in our environment. We have a large number of support staff (100+) that need to have access to Remote Tools and possibly some Collections for application deployment.
I didn't see anything from my quick search on TechNet or the web about this issue.
Also, is there any web console (or similar) that can be used, instead of giving access to the console?
Any help would be appreciated.
Thanks
Angelo
Angelo

There is no limit that I know of. The only limitation would be the server hardware. If giving support staff access to the console worries you, you can use other means.
1. Give users just the remote control/remote tool apps
2. Link collection to security groups and allow support staff to modify the groups.
If my answer helped you, check out my blog:
DeployHappiness. Subscribe by
RSS or
email.

System task 'policyevaluator_unlock ' returned error code 0x8000fff in windows pacth deployment on windows 7 by sccm 2012 Sp1

hi All,
I have faced mentioned error in Win7's ccmexec.log file doing windows pacth deployment on windows 7 by sccm 2012 Sp1
system task 'policyevaluator_unlock ' returned error code 0x8000fff
Kirpal Singh

Thanks for reporting this symptom. We investigated and found that this error occurs when user unlocks the workstation. Due to this error, ccmexec service doesn’t request for user required policies when user
unlocks the workstation. We will investigate and address this symptom. Other than user unlock, all other user policy scenarios will be functioning as expected. The client will process user policies when user logs on as well as in the regular user policy polling
schedule”.
BC

SCCM 2012 Console very Slow

Hello I'm Facing Performance issue with SCCM 2012 Console , all Rules and SQL Db on Same Physical Server with the following Specs:
24 Cores and 28 GB of Memory.
thanks
Ahmed Ali

Can you provide a few more details. What else do you have running on the server (other apps, site system roles, synchronization processes, number of clients etc). Do you have any I/O issues, processor issues, memory leaks etc
Kent Agerlund | My blogs: blog.coretech.dk/kea and
SCUG.dk/ | Twitter:
@Agerlund | Linkedin: Kent Agerlund |
Mastering ConfigMgr 2012 The Fundamentals

Hi, I've been trying for days to download Windows support software via Bootcamp assistant, but it always failed with message 'Can't install Windows Support Software because it is not currently available from the Software update server.' Any advice welcome

Hi,
I've been trying for days to download Windows support software via Bootcamp assistant but it always fails with message 'Can't install windows software because it is not currently available from the software update server.'
Anyone else had problems or success with this?
Thanks in advance.

9thdoc wrote:
I'm getting a similar but distinct error message in snow leopard: Download could not continue. "The windows support software is not available" and have no original snow leopard instal disc with me.
Your issue is completely different. You are running Snow Leopard. There is no download for Windows Support software for Snow Leopard, hence the error you see. Snow Leopard Windows Support software is on the Snow Leopard installation disk.
You need the Snow Leopard installation disk or a replacement for it.

Reporting Service Error Code 7403, on SCCM 2012 R2 with SQL 2012 SP1 CU6

Dear All,
I am facing issue to install Reporting Services Point on SCCM 2012 R2 with SQL 2012 SP1 CU6. getting error messages id 7403. please let me know if SQL 2012 SP1 CU6 is supported with SCCM 2012 R2 or not & if you have any solution on it.
Error Message: The report server service is not running on Reporting Service Point server "SCCM2012"; start the service to enable reporting.

I am getting below error msg when trying to browse both sites
1) For Reports
The report server cannot decrypt the
symmetric key that is used to access sensitive or encrypted data in a report
server database. You must either restore a backup key or delete all encrypted
content. (rsReportServerDisabled)
Get Online Help
Keyset does not exist (Exception from
HRESULT:
0x80090016)
2) For Reportserver
Reporting Services Error
The report server cannot decrypt the symmetric key that is used to access
sensitive or encrypted data in a report server database. You must either restore
a backup key or delete all encrypted content. (rsReportServerDisabled)
Get Online Help
Keyset does not exist (Exception from HRESULT: 0x80090016)
SQL Server Reporting Services

SCCM 2012 Console Not Saving Customizations

I am actually unsure of whether this is by design or if I am just doing something wrong. That being said, I am using the console for Management of SCCM 2012 and whenever I close the Admin Window all of the changes I have added to the console are gone.
For example I added "Last Infected Threat" and "Last Infection Time" to my devices view and it works great. Close the app and re-launch and it is gone.
Am I just battling against the design of the software, or is it supposed to save settings?
Thanks,
Portland Public Schools / Systems Administrator II

More info:
How to Create a Configuration Manager Console Custom View
http://msdn.microsoft.com/en-us/library/hh948614.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows Intune, Windows 8.1, SCCM 2012 R2

Hello,
I am planning to setup a new infrastructure to manage devices using Intune and SCCM 2012 R2 for one of my customer.
We plan to have one single site, where in the devices will be imaged with Windows 8.1 and then will be provided to users who roam around the world.
We like to manage these devices and do:
1. Inventory
2. Software Distribution
3. Software Updates
4. EndPoint Protection
5. Reporting
I have come to learn that:
1. Add and verify company domain at account.manage.microsoft.com
2. Add UPN in AD
3. Run DIR Sync for Users
4. Configure Intune Subscription
5. Install Connector
6. Whats the next step for configuring Windows 8.1?
My questions:
1. Is Cloud based Distribution Point required for hosting content. If not, how will the devices download the content and install the app?
2. Do we need PKI for Windows 8.1 devices(enrollment and management)?
3. Where should I install Company App Portal?
4. What are the different ways of enrolling Windows 8.1 device (Workplace & Store)?
5. Any other info if you can share, really appreciate
Please advice
Rajiv

Hello Nico,
Thanks for the guidance.
1. Distribution Point: manage.microsoft.com - whats the disk size/storage available by default. Is it unlimited. As the Intune license is user based. I can have 5 devices enrolled per user. I may have loads of packages/apps.
5. Your apps need to be signed with certificate that's is trusted by your device : I guess when we import
an Application in SCCM, it never checks if it has a signed certificate. One would need to ensure that the cert is present.
Can I install software updates to devices managed using SCCM Intune?
We are planning to have a single site with a remote DP for building devices with Windows 8.1. Once the device is ready, it will be given to the user. The user will enroll the device and is good to go. I am sure we will be able to embed Company Portal App
into the build image?
Thanks
Raijv

Connecting Via Windows FTP Service

I recently moved several sites that used Contribute to a new
webserver (Windows 2003 running IIS 6). The server uses Windows FTP
Service.
To create a FTP account I created a Windows Account and then
a Virtual FTP directory with the same name as the windows user and
pointed that virtual directory at the root of the site I want to
update with contribute. I gave the Windows account full control on
the site root folder. I can FTP connect via Internet Explorer and
the command line.
When connecting via contribute I get an error saying
The directory you specified does not exist. Please make sure you
entered the directory name correctly. On some servers,
file/directory names are case sensitive"
Contribute seems to be trying to change directory to a folder
with the same name as the FTP virtual directory, rather than to the
folder that the virtual directory points at.
here's the error log from contribute
Date: 11/27/2006
LocalTime: 14:07
Host: 80.76.207.49
Port:
LoginID: myFTPUserName
Path: /myFTPUserName/
Passive Enabled: false
ProxyHost: NoneContribute Alternate Rename: no
Contribute Optimized: yes
======================== Test Results
==========================
NOTE: Microsoft FTP Service has been detected. For more
information on FTP server compatibility issues, please see
http://www.macromedia.com/support/contribute/ts/documents/ftp_info.htm
Login: SUCCESS!
Changing Directory To: /myFTPUserName/ Error. The directory
you specified does not exist. Please make sure you entered the
directory name correctly. On some servers, file/directory names are
case sensitive.
----------------------- FTP log from the last operation
> CWD /ftp
< 550 /ftp: The system cannot find the file specified.
> CWD /ftp/
< 550 /ftp: The system cannot find the file specified.
> CWD /
< 250 CWD command successful.
> RNFR ftp
< 550 ftp: The system cannot find the file specified.
> MDTM ftp
< 550 ftp: The system cannot find the file specified.

Hi!
I think the windows service is using a different systemaccount that your other application, and that account does not have rights to read the sbo-common database.
You can change the account used by your service on the service definition or in the SERVICES application of Windows.
Sir Harold

Compatibility Windows 10 and SCCM 2012 R2

Hi,
Is SCCM 2012 R2 compatible with Windows 10?
Will we need to update MDT 2013 or if they will be a new version? What about USMT?
When may we expect to have a fully compatible solution for Windows 10?
Thanks,

Hi,
It is explained it this blog post
http://blogs.technet.com/b/configmgrteam/archive/2014/09/30/windows-10-enterprise-management-with-sc-configmgr-and-intune.aspx
I haven't seen any offical statement of how long after Windows 10 is released in RTM that these products will be released as well, as we are getting closer more information will come I assume.
And USMT is included in ADK preview that is available here:http://www.microsoft.com/en-us/download/details.aspx?id=45522
If windows 10 is compatable with SCCM 2012 R2, I would say yes it works is it supported no, as Windows 10 isn't released.
regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Connection via Windows Remote Desktop

I want to connect my BlackBerry with the BlackBerry Desktop Software which isn't installed on my local machine but on the computer to which I connect via the Windows Remote Desktop (both are Windows XP Professional). It has worked fine with my old Phone and Microsoft ActiveSync but not with my new BlackBerry. Does anybody have any experience with this scenario?
Many Thanks in advance!
Paul.

you are connecting it to local hardware(PC), how will the remote PC know. it's not posible, please install desktop manager on your local PC.
Click on KUDOS to appreciate our efforts and mark the thread RESOLVED if your issue is resolved.

Connect via Windows Powershell in SCCM 2012 CONSOLE (with PowerShell 4.0 installed)

Similar Messages

Maybe you are looking for