Consolidating account to boot disk

On my Mac Pro (3,1) I am using a different disc for startup than where my accounts lie. The disc with the accounts is getting full, and I'd like to migrate the actual accounts to the boot disc.
How do I get all the user accounts on to the boot disc properly?
For more background, the Sidebar shows a mixture of locations for various items under "Places". My user account is under the original disc along with the Documents folder, while Applications and Utilities are under the actual startup disc.
-Scott

Maybe this will help: http://www.macworld.com/article/1492/2002/06/osxsecrets.html

Similar Messages

  • Any tips for restoring data on new boot disk?

    I'm replacing the boot disk on my PB G4. Rather than cloning the old disk, which functions fine, I'd rather do a clean install of Tiger and my apps just to clean out some of the garbage. Any advice as to the best path to take when it comes to moving data / prefs / settings for the following apps?
    Address Book
    Mail
    iCal
    iSync
    iPhoto
    iTunes
    Safari
    and especially Keychains
    Now that I think about it, I guess I'm trying to move my home folder over and replace the root account that reinstalling the OS is going to do.

    I guess I should clarify. I don't create a disk image when I clone a drive with Disk Utility. What I do is simply take the boot drive and drag it to the field in the restore tab that says "source" and drag the external disk to the destination. I check the erase destination box and click on the restore button. Then I do not touch the Mac until the restore process is complete.
    I have done this on at least four different Macs and tested each copied disk by rebooting it and actually using it.
    That being said, I think SuperDuper is a much more useful program for backkups, especially if you pay the registration fee and set it up to do automated backups on a daily basis.

  • Moving boot disk to raid 0

    Hi Guys,
    I have the following volumes on my MacPro
    1. Boot Disk - 465.3 GB, 200GB used
    2. Raid 0 volume - 436.2 GB
    How easy is it for me to move the boot disk data to the raid 0 volume and then boot from the raid 0 partition.
    Also I have heard that if you have a raid 0 boot disk that the firmware updates can fail, is this still true.
    Thanks for any help
    Andy

    Quicken Data files are actually packages, which can contain alias to the volume. Once I stripped the aliases from the data file, no problems, but for the longest time (years) everytime I cloned and used a different volume I'd run into trouble.
    LittleSnitch hard codes the volume name, but also WHERE on the volume, an application is located. Very annoying.
    So it may be plist or preference, but it could also be writing an alias to data file, or even back to the application package itself.
    You would think at some point during testing especially, a light bulb would go off and realize there is a better way to code (unless it really is deliberate and trying to tie a program to only a single volume type system, which the Mac doesn't need to be).
    Feedback the vendor. However, unless you do a lot of moving stuff around (like during testing) it is a "once only" event. If you name the new RAID boot volume with same name, might not even matter.
    I do a lot of backup and restores during the course of a week, SuperDuper works well, not 200% perfect maybe, but works.
    I keep my boot volume, though, free of my home account. That resides on another volume and can last for years. The boot volume gets changed more often. And I think having "home account" (but not /Users) not be on the boot drive makes it easy and avoids some of these problems even.

  • Pavillion Boot Disk Error

    My son's Pavilion g6 has two users, his and mine.  When I log in as mine, the computer seems to work fine, in and out of Safe Mode.  When I log in as his user, I get the blue screen data dump, then a boot disk error.  Here is what I have tried:
    Restore on my user
    Windows security scan (which didn't finish before shutting down)
    Booting with Safe Mode on his user (didn't work)
    Took out the hard disk, sprayed with compressed air and reinserted the hard drive
    What options do I have?  Can I delete his user?  Could it be a virus?  I am stumped.
    I can get to all of his files but I can't stay logged on with his user.
    Thanks.

    Yes you can delete his user account and create a new one. Just be sure to copy his files if he has stuff he doesn't want to lose. Restart the machine before trying o create a new user account for him.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • How can I reinstall crashed iCal without the Boot Disks?

    I crashed iCal the other day by adding too much text into the event details field.  How do I fix the program, or how do I re-install a fresh version of it?  I have a MacBook Pro OS X 10.7.3
    I also don't have any boot disks for the operating system (which is what the internet suggested using to re-install iCal off of).
    Here is the error message I got:
    >>    The server responded with an error.
    [Then with the text that I was trying to add underneith it]
    The text reaches past the screen, and I can't move the window to see what it says at the bottom.

    Greetings,
    This doesn't sound like an error with the iCal application but with the data you have in it.
    Lion (10.7) does not come on a disk. It is available via download (if you purchased it in the Mac App Store or if your computer came with Lion preinstalled) or as a USB thumbdrive you buy from Apple.
    For this issue I would suggest:
    Quit iCal
    Click anywhere on the desktop and then click on the "Go" menu at the top of the computer screen while holding down the "option" key on the keyboard.  You will see "Library" in the menu. Click on it.
    Click once on the folder called "Calendars" to highlight it.
    Go to File > Duplicate (this makes a backup as you can't use iCal currently).
    Once the duplication is complete, remove the following to the trash and restart your computer:
    Home > Library > Caches > com.apple.ical
    Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)NOTE: To get to "Home > Library" in Lion: Click anywhere on the desktop and then click on the "Go" menu at the top of the computer screen while holding down the "option" key on the keyboard.  You will see "Library" in the menu.
    Launch iCal and test.
    If the issue persists:
    1. Go to iCal > Quit iCal
    2. Remove the following to the trash and restart your computer:
    Home > Library > Caches > com.apple.ical
    Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
    Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
    --- NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
    3. Launch iCal and test.
    Hope that helps.

  • How do I reformat my ibook without a boot disk?, How do I reformat my ibook without a boot disk?

    I have an older -- 2005ish -- G4 ibook. I would like to pass it on to my young niece, but it is in need of a complete reformatting of the hard drive. While the hard drive is 30 GB, after manually deleting all but the essential programs, it only allows me to store on about 3.5 GB of hard drive. It also is too slow. Is there any way to completely restart without the boot disk? I lost it somewhere along the way.
    Thanks.

    You could go to System Preferences > Accounts and create a new account, using your niece's name for the account and being sure to give that account administrative privileges. Sign out and sign in with the new account. Once you see that the account is working all right, you can delete your old account.
    Unfortunately, you could have done this without dumping all the applications, some of which she may have wanted. If they were original applications that came with the iBook, there's no way to get them back without the system Restore discs that came with the iBook.

  • Help creating a boot disk for ailing powerbook (and journalist!)

    Hello, I'm a journalist with a desperate need to recover my Mac.
    My Powerbook G4 (operating 10.4.8 I believe) was working fine until I did the latest suggested Mac software upgrade of Safari. Immediately Safari stopped responding hanging up or quitting. So I tried the next recommended update, thinking perhaps the two went together: Security 2008-009 I believe. It required a restart, which I did. (Note: I didn't do the recommended Java or Quicktime update at the same time because I'm currently working in Sierra Leone with terribly slow internet and figured I'd get to it later).
    Now, however, the computer won't boot up. I hear the tone, I get the gray screen with the apple, I get the blue screen, I get the opening OS X screen and the blue progress bar, which then quits early on. Then I get a blue screen of alternating hues, which continues infinitely.
    I tried all the Apple and web-suggested fixes. I cannot enter safe mode and can only perform functions with the single user mode. I've tried fsck and it said my HD is fine. The problem, I suspect, would be easy enough to fix if I could just reinstall OS X with my CD. However I am currently 7000 miles from home and CD, and in desperate need of my laptop in order to continue my volunteer work.
    I do have access to a friend's MacBook Pro 10.4.9 and the internet. I have downloaded Carbon Copy Cloner... however I don't know which files I need to copy in order to create a boot disk. Nor do I know how to create a boot disk to actually put into my computer. I have also been scared by the CCC literature that says I need to erase the target volume... which in this case is my external hard drive containing all of our video footage from the last 8 months!
    I use my computer every day, however I am a newbie at using things like Terminal and higher order functions that these occasions seem to require. CCC's Help manual, for me, might as well have been written in hieroglyphs (which, come to think of it, would have been easier as I seem to understand pictures well enough).
    I would be eternally grateful for any simple or step-by-step advice which might help me get back to work. I'm training African journalists, and without my computer to edit, we cannot do a thing!
    Thanks,
    Kim

    Here's some trouble shooting methods that I've copied from Apple KB articles:
    Resetting PRAM and NVRAM
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time. Release the keys.
    If zapping the PRAM doesn't work, try resetting the PMU.
    Warning: Resetting the power manager also resets date and time settings. Performing a PMU reset returns the iBook and PowerBook hardware, including NVRAM, to default settings and forces the computer to shut down.
    PowerBook G4 (DVI) and PowerBook G4 (1 GHz/867 MHz)
    If the computer is on, turn it off.
    Disengage the two keyboard latches located between the Esc and F1 keys, and the F11 and
    F12 keys. (You may also need to disengage the keyboard locking screw located between the
    F5 and F6 keys.)
    Lift the keyboard. To ensure no harmful static electricity is transferred to the computer,
    properly ground yourself before performing this procedure.
    Press and release the reset button located on the upper right side of the logic board near the power button, shown here. Wait 5 seconds.
    Press the power button to restart the computer.
    PowerBook G4 and PowerBook G4 (Gigabit Ethernet)
    If the computer is on, turn it off.
    Press and release the reset button located on the rear panel of the computer between the
    external video and modem ports. Wait 5 seconds.
    Press the Power button to restart the computer.
    HTH!

  • Unable to Log and Capture AND make FCP a boot disk

    I am unable to go into Log and Capture mode in FCP 4. I can capture from firewire using I movie just fine so I know the sytem works. The minute I open Log and Capture from within FCP (with the JVC Mini-DV camera hooked up thru Firewire), it crashes. Help. I upgraded from FCP 3 to FCP 4 a couple years ago and it hasn't worked right since. Would re-installing the FCP 4 upgrade work? Also, my system works very sluggish. Please explain to me how I would make the veersion of FCP 4 my boot disk. I realize that I can't have the FCP 4 application and the media on the same drive but is there a way to partition one of my drives and make FCP one of the startup disks? Hope this isn't too confusing. Thanks.

    First off, FCP 4 was darn unstable. FCP 4.5 is a free upgrade and is STILL the most stable version out there. FCP 5 is getting there.
    Secondly, try:
    Shane's Stock Tip Mantra: If the program was working fine, and now isn't, or just isn't working the way it should, the first things to do are:
    1) Trash your FCP preferences. Download the appropriate version of FCP Rescue at http://fcprescue.andersholck.com/ and run it.
    2) Open the Disk Utility and Repair Permissions.
    As for partitioning the hard drive, that isn't necessary. Hasn't been since FCP 3.
    Shane

  • Cannot get MacPro to allow me to boot to an alternative boot disk. Can choose in control panel but will not use the disk to boot. Also won't boot using disk selected using option key

    My primary boot disk is encrypted as is a secondary boot disk (backup) but I cannot boot using any other disk. System 10.8.5, MacPro 4.1.
    All disks mount using primary boot disk. All disks check out as OK and I have repaired permissions.
    When I choose in the control panel the Mac boots but will always use my original boot disk.
    When I select the disk using the option key at startup, the boot process stalls with a grey screen and a spinning cursor.
    Thanks,
    Dave

    Still trying to figure this out. I erased the drive, did a format using disk util and then re-installed the system but I still cannot get the disk used as a startup drive. I also tried an external firewire drive and it won't allow me to boot from it either.
    I can choose it starting up with the option key but it just gives me a blue screen and the spinning cursor.
    If I select it in the startup pref pane it boots into my other startup drive only.
    DaveLon

  • Do I need to change boot disk partition types - if so how?

    I set my boot disk up with several partitions, one of which is the Apple_UFS partition type. I now want to be able to use if for Mac data files - pdfs, word docs, etc. (I'm running 10.4.11 on a powerpc - when I can afford an Intel macbook, I'll upgrade to Leopard).
    I have some questions:
    1) Will puttting Mac files on a Apple_UFS volume cause problems (rsource & data forks in files)? (If its OK, then skip to Q6 &Q7 which I'd like to know for future reference).
    2) Should I change the partition type (to Apple_HFSX)? There's no data on it now, so that's not a problem.
    3) Disk Utility won't let me change partition type, only change the name. Diskutil has the command " eraseVolume format name device", but I suspect that format is the current format, not a new format - please correct me if I'm wrong.
    4) pdisk interactive mode has the "t" command which looks like what I want.
    5) after the partition type is changed, I presume I then need to use newfs_hfs -
    6) I am confused about the device/partition name - "diskutil -l" shows "/dev/disk0" with the partition I want to change as "disk0s11". "pdisk - l" shows "/dev/rdisk0" and the partition number as 11. The "newfs_hfs -h" gives an example of "newfs_hfs -v Untitled /dev/rdisk0s7". So in my case, is my device "/dev/rdisk0s11"??
    7) I have an external firewire drive that also is partitioned. "pdisk -l" and "diskutil list" give different outputs - partitions 1-9 are the same on both (Apple stuff), but pdisk show several "Apple_Free" partitions that diskutil ignores - pdisk has 23 total partitions, hdutil has 18. So which number do you use for the disk-identifier?
    Thanks for any help on this confusing matter.

    The regular versions of PSE 10 have the same kind of automatic updating (just go to Help>Updates and let the updater do its thing) that full Photoshop has. You can update the raw converter in the app store version, but since apple requires that everything in app store programs has to live within the app package itself, the file paths are different, so unless adobe updates the whole program so you can update through the app store, the adobe updater doesn't know what to do. You can do it manually, but it's kind of complicated to dig everything out of the adobe update, not as simple as it was in older versions of PSE.
    This thread over at the adobe forum gives you the general process for updating the app store version:
    http://forums.adobe.com/message/4106312#4106312

  • [Sol 10 11/06 SPARC on Sun Blade 2500] Could not determine boot disk?

    dear all,
    I have a problem during installation of Solaris 10 11/06 Sparc on Sun Blade 2500. After I choosing "Initial Install" at "Select Upgrade or Initial Install" stage, appears the following error message :
    "Note : Default install is not possible. Default boot disk could not be determined"
    I have already concerned that the installation DVD is well burned, and the DVD-ROM is worked, but I'm not sure that the HD itself is well or defect. Could anyone tell me or figure out how would I do?

    Most likely you have a disk problem. I think it may not have found a disk. If the install process left you in a shell, I would suggest using format, to see what it thinks. My guess it does not see any disks.
    Another option from the ok prompt (also called OBP), is run probe-scsi or whatever the device type it. Check the options available at the ok prompt.

  • White Screen at Boot When Attempting to Access Recovery or Select a Boot Disk

    Introduction
    I want to share a solution for a problem I encountered that Apple technical support was unaware of (they said they would create a new kdoc when I called them to share my problem and its solution) and for which I could find no documentation online.
    First, this is really a tip rather than a question, but I did leave it marked as a question in case anyone wants to earn some points by responding with a different solution to the problem I am about to describe. Additionally, I do not have a enough points to post a "Tip" so I am just starting a discussion instead.
    Next, when I encountered the problem I am about to describe, I had not yet enabled a firmware password.
    Finally, a massive "Thank you!" to the Great Pondini (James Pond - http://pondini.org) for helping me learn so much more interesting stuff about various OS X features and functionality (all for no charge) over the years.
    Now on to why I have started this discussion...
    The Problem
    I recently purchased a new MacBook Pro (Core i7, SSD, etc.). After working with Setup Assistant to transfer everything from the most recent Time Machine backup of the older MBP I was replacing, applying all OS updates, and then enabling FileVault 2 and letting the requisite disk encryption process complete, I decided to I would go ahead and just proactively repair any permissions and ACLs for my user directory just in case any repair was necessary.
    However, after shutting down my MBP, waiting, and then starting it up with Cmd-R being pressed while turning the MBP on, nothing would happen - I would just have a white screen with no Apple logo, no EFI login, no Recovery Console, nothing (and I waited for a very long time for something to show up). My only option was to do what I really do not like doing and that was to just power my new MBP down.
    So, I tried again, this time holding down Opt while turning my computer on so as to select a disk at boot. The same problem returned.
    Just to check, I once again started up while holding down the Shift key to attempt a Safe Boot. No dice.
    Prior to trying all of this I made sure that I did have the Apple Recovery Partition in addition to my user partion and the EFI partition, so I did not understand why this would be happening. Why could I not boot into Recovery? Why could I not select a boot disk? And, why could I not go into Safe Boot?
    To be safe, I started up and logged into my MBP as I normally would, then set my startup disk to be my Recovery USB for OS X 10.8, restarted, and verified all three partitions (and, since I had my Time Machine disk connected all three times I forced the computer to power off, I verified it as well). I then set my startup disk back to my SSD, and logged in and got online to see if anyone else had experienced this issue. After making sure I was not being crazy and using key combinations that were somehow made irrelevant, I shut my MBP down and walked away for a few minutes.
    The Solution
    So what solved my problem? A good 'ol reset of the NVRAM (aka/fka PRAM). If you are not familiar with how to reset the NVRAM:
    Power off your Mac and go do something else for 30 seconds to a minute.
    Press and hold down the Opt, Cmd, P and R buttons, and then press the power button. I have big hands and this is a one person operation for me. If you are not so "lucky", find someone to press the power button as you hold those four buttons down.
    Continue holding those four buttons down through the first startup chime and then release all four of them only after the second startup chime is sounded.
    So, for some reason, I had to reset the NVRAM on a brand new MBP that had been started up only once and restarted only once when I enabled FV2. Maybe something cached needed to be cleared out following the FV2 process, or maybe something funky was carried over after it was setup in the factory and shipped direct to me from China.
    The moral of the story is: If you have strage issues during the startup of your Mac, just reset the NVRAM and try again. This has worked for a number of strange issues on various Macs for me in the past and proved to be useful once again on a brand new MBP that I never would have thought needed its NVRAM reset so soon into its lifecycle.
    Special Note
    There are two processes I always complete and recommend to others following a major software update (e.g. upgrading to a new version of OS X) and when I restore or otherwise transfer the most recent Time Machine backup to my current Mac or to a new one.
    First, following a major or massive software update, go into Disk Utility, select your system and data drive(s), and then just click on "Repair Permissions" (Choosing "Verify Pemissions" will result in having to then click "Repair Permissions" if any permissions need to be repaired, so remove one click from the process).
    Second, after transferring from a Time Machine backup, I like to make sure that my user directory permissions are good to go before any time is allowed for problems with those permissions to set in. If you are not familiar with the user directory permissions and ACL repair process (this process is not the same as the "Repair Permission" functionality in Disk Utility), here is how to do it:
    Shutdown your Mac and wait about 30 seconds.
    Press and hold down Cmd-R and then power on your Mac. Once the Apple logo with the spinning wheel shows up, release those two keys.
    From within the Recovery Console, open a new Terminal session via the "Utilities" menu.
    Invoke the following command (all one word, lowercase): resetpassword
    In the "Reset Password" application that opens, select the disk that your user home directory is on, and then click the "Reset" button at the bottom underneath the "Reset Home Folder Permissions and ACLs" heading and wait for the process to finish. Any messages displayed can typically be safely ignored. If you want to be sure, search for information regarding any messages that you do not like.
    Restart your MBP and enjoy using it.
    (Note that if you have FV2 enabled, you will need your FV2 Recovery Key to actually reset your password. This is one of many reasons that I enable FV2 - anyone can startup a Mac and go into the Recovery Partition if it exists and reset a password, but having to also enter the FV2 Recovery Key adds a nice extra layer of protection. In addition to that, setting a Firmware Password makes it nearly impossible to start up from any disk other that that which is currrenlty installed in your Mac without knowing the Firmware Password - another security bonus. If someone gets ahold of your Mac, and you have FV2 enabled and an appropriately complex Firmware Password set, then them using your Mac as their own becomes a decently difficult process. It's by no means perfect computer security, but it makes it more challenging for someone to steal and use your Mac.)
    If anyone has any other tips to share or additional solutions to problem I described, please discuss and share.

    Which OS X is installed on your Mac ?
    Troubleshooting advice can depend on that information.

  • Is there any way to make a snow leopard partition on an early 2011 MacBook Pro that was upgraded to Lion, without the original boot disk?

    So I have an early 2011 MacBook pro,  I believe it shipped with snow leopard originally, as I purchased and upgraded to Lion fairly early on.  I am trying to make a partition right now and have it run snow leopard so I can use programs that have PowerPC.
    I should note, I replaced both the RAM and the harddrive in my Macbook pro.  I changed from 4 GB of ram (that came shipped) to 8 GB of ram from a 3rd party, that I installed on my own months ago, have registered in the computer and have been working fine for quite some time now.
    Also I should note I replaced my harddrive.  I went from what ever the standard 500 GB harddrive that shipped with 15 inch early 2011 MB pro's.  I now have a 3rd party SSD that's 240GB's that I also installed on my own, (at the same time as the RAM---Black friday items)  The harddrive has been working just fine since then.
    In installing the harddrive I borrowed a friends external harddrive and used a program called carbon copy cloner to get everything over to the SSD.
    Now here is my issue.  I have ordered the Snow Leopard (10.6.3) install disks from apple, I have created a partition on my SSD for snow leopard, but when I try to select the install disc for snow leopard at boot I get three beeps.
    I know this issue has been posted elsewere but it said answered and the answer is no longer available.  I also am unsure if any of the RAM or Harddrive swapping could have been causing the issue.  I have the old harddrive and RAM still, but unfortunatley have no external harddrive anymore or money to afford one.
    Is there any way I can install a partition that runs snow leopard on my early 2011 MB pro with what I have (new SSD, New RAM, Current version Lion running, no external drive, lack of original snow leopard disks [I lost them ] and the general 10.6.3 snow leopard boot disks).
    Let me know If there is anything I can do.  I'm a now broke college student so i'd like to spend as little $$$$ as possible
    *PS I should also note the DVD drive is working fine, it reads the disk, the disk is brand new, it plays DVD's fine and has never had any issues in the years i've used it for similar tasks*
    sorry for the long drawn out post, I just wanted to include as much as possible from what I've seen other people have issues with

    BrettGoudy wrote:
    ...Is there any way I can install a partition that runs snow leopard on my early 2011 MB pro with what I have (new SSD, New RAM, Current version Lion running, no external drive, lack of original snow leopard disks [I lost them ] and the general 10.6.3 snow leopard boot disks)...
    As the last post suggests, call Apple and order a replacement original disc for about $17.  They will ask you the model and serial numbers.
    Your retail version of Snow Leopard OS 10.6.3 will not work on that Mac as it requires a minimum of OS X 10.6.7 to boot and operate.
    Another alternative is to again borrow another Mac to install your retail Snow Leopard into an external HD or partition, upgrade it to 10.6.8 and then clone it back to a partition on your MBP.

  • Unable to open windows using boot camp.  Get message "The bless tool was unable to set the current boot disk."  Any thoughts, Thank you.

    Unable to open windows using boot camp.  Get message "The bless tool was unable to set the current boot disk."   I am using an Imac , Lion operating system, and Windows 7.  It worked a few days ago.  Any thoughts, Thank you.

    Note that nowhere in the Boot Camp instructions does it tell you to use Disk Utility to format the Windows partition. The Boot Camp Assistant program creates the partition & sets the +partition scheme info+ of the disk as appropriate for the Windows installer but the Windows installer itself is responsible for formatting the new partition with the appropriate +file system scheme+ (NTFS for Windows 7).
    If you follow the instructions in the Boot Camp Installation & Setup Guide to the letter you should have no problems installing Windows.

  • Error message (can't find boot disk) installing win xp on VirtualBox

    In trying to install win xp to a VirtualBox vm, I get an error message that a boot disk can't be found. This seems logical to stupid me, as I have not yet installed the win system from the install disk. Instructions that came with the VirtualBox said I must have windows installer on my computer to install win xp. So I downloaded it, but cant figure out how to install it on the vm. To further confuse things, I can't seem to find information as to whether my Intel 2ghz core duo is a 32 bit or 64 bit chip.
    Thanks for any help you can give me...
    Phil (confused in Menifee) Green

    Hi, Dave & Dave -
    Wow, that took longer than I thought. I have been back for a couple of hours, and spent that time running the uninstall program, and then going to users/library/VirtualBox and deleting that folder, and its contents. Next I downloaded a fresh copy of VirtualBox from the Sun website, installed it on my computer, then ran the VirtualBox set up (setup the settings) and then clicked on the start icon. After the splash screen, I once again got the same error message. I repeated that routine at least three time, all three times I received the same message.
    I then got the bright idea to go into my time machine and went back to several days after I had installed the program previously (March 25, 2009) and retrieved both the program from the application folder, and the vb folder from the user library, restoring them to my present computer state. After all, I thought, if it worked on March 25th, those files should work now. DRAT, I was wrong, Got the same message at the same place in the startup routine.
    So, Dave and Dave, after a little more futzing around, I'm now back to the same place I was when I first posted about my problem: My win xp disk will still not mount. ****!!!
    Phil

Maybe you are looking for