Constant fan & Less heat
I don't know if I have to complain or not.
The replaced mbp is bettet than the previous one.
However, the fan on the left hand side near magsafe is running all the time. Well, it doesn't create any noise if I lift the laptop up with my hand. It create wooooooooooong sound as soon as I put it on the desk. It seems some sort of vibration...
This means fan is running all the time, isn't it?
Obviously, it doesn't create much heat on the surface and I can put it on my lap easier than before.
Mine is 31st week manufactured & 17inch 2.16/1gb ram.
What do you think?
Yeah mine does that but I have a 5400 rpm hdd. And mine is 1.83. I think that this is normal. I would rather have my fan running than have the whine. But my fan is not as loud as the whine so I really don't have to worry about it. I am not sure but I think that is all in spec. Don't forget this is a thiner laptop than most pcs, so it needs to vent more as it does not has a big of fans.
Similar Messages
-
Laptop consuming battery fast and a constant flow of heat from CPU
Hello to all.
I'm having similar problems like this one, here using a Dell Vostro 3460, maybe is just some non-windows OS unfriendly hardware. Battery last like 5 or 6 hours on Windows, and just like 2 or 2 and a half on Arch. Will remove battery until there is a solution, and use the laptop only on my workplace.
I have to admit that, I don't know how to disable the discrete video card, I just blacklisted nouveau.
LCD is not hot, there is just constant flow of heat by the ventilation gap (maybe the CPU dissipator?) brightness settings are ok. On windows that heat flow sometimes just stops.
Any help is very appreciated.
Thanks.
sensors:
acpitz-virtual-0
Adapter: Virtual device
temp1: +49.0°C (crit = +106.0°C)
temp2: +49.0°C (crit = +106.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +56.0°C (high = +87.0°C, crit = +105.0°C)
Core 0: +56.0°C (high = +87.0°C, crit = +105.0°C)
Core 1: +53.0°C (high = +87.0°C, crit = +105.0°C)
Core 2: +51.0°C (high = +87.0°C, crit = +105.0°C)
Core 3: +56.0°C (high = +87.0°C, crit = +105.0°C)
dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.3-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 20120721 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Aug 26 09:14:51 CEST 2012
[ 0.000000] Command line: root=UUID=d82f8994-80dd-4a77-b412-e5c80ed3a648 init=/bin/systemd ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000091bff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000091c00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000a9b07fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a9b08000-0x00000000a9d09fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a9d0a000-0x00000000b8bbcfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b8bbd000-0x00000000baeeefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000baeef000-0x00000000baf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000baf9f000-0x00000000baffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb000000-0x00000000bf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bf5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: Dell Inc. Vostro 3460/0WCY8Y, BIOS A04 05/10/2012
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x1bf600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FF800000 mask FFF800000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0BB000000 mask FFF000000 uncachable
[ 0.000000] 5 base 100000000 mask F80000000 write-back
[ 0.000000] 6 base 180000000 mask FC0000000 write-back
[ 0.000000] 7 base 1BF800000 mask FFF800000 uncachable
[ 0.000000] 8 base 1BF600000 mask FFFE00000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff88000008b000] 8b000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xbaffffff]
[ 0.000000] [mem 0x00000000-0xbaffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0xbaffffff @ [mem 0x1f5f7000-0x1fbd2fff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1bf5fffff]
[ 0.000000] [mem 0x100000000-0x1bf5fffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x1bf5fffff @ [mem 0xb8bb5000-0xb8bbcfff]
[ 0.000000] RAMDISK: [mem 0x1fbd3000-0x1fffefff]
[ 0.000000] ACPI: RSDP 00000000000f0120 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000baffe170 0009C (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: FACP 00000000bafee000 000F4 (v03 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: DSDT 00000000baff1000 09EAA (v02 DELL IVB-CPT 00000000 INTL 20061109)
[ 0.000000] ACPI: FACS 00000000baf7c000 00040
[ 0.000000] ACPI: SLIC 00000000baffd000 00176 (v01 DELL QA09 00000002 LOHR 00000001)
[ 0.000000] ACPI: BOOT 00000000baffc000 00028 (v01 00000001 PTL 00000001)
[ 0.000000] ACPI: SSDT 00000000baffb000 00166 (v01 DELL PtidDevc 00001000 INTL 20061109)
[ 0.000000] ACPI: ASF! 00000000baff0000 000A5 (v32 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: HPET 00000000bafed000 00038 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: APIC 00000000bafec000 00098 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: MCFG 00000000bafeb000 0003C (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: SSDT 00000000bafea000 00860 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bafe9000 00A92 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: UEFI 00000000bafe8000 0003E (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: UEFI 00000000bafe7000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: POAT 00000000bafe6000 00055 (v03 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: SSDT 00000000bafe5000 00DD4 (v01 NvORef NvOptTbl 00001000 INTL 20061109)
[ 0.000000] ACPI: UEFI 00000000bafe4000 0027E (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001bf5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1bf5fffff]
[ 0.000000] NODE_DATA [mem 0x1bf5fc000-0x1bf5fffff]
[ 0.000000] [ffffea0000000000-ffffea0006ffffff] PMD -> [ffff8801b8c00000-ffff8801bebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x1bf5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x00090fff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0xa9b07fff]
[ 0.000000] node 0: [mem 0xa9d0a000-0xb8bbcfff]
[ 0.000000] node 0: [mem 0xbafff000-0xbaffffff]
[ 0.000000] node 0: [mem 0x100000000-0x1bf5fffff]
[ 0.000000] On node 0 totalpages: 1539388
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3899 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 735227 pages, LIFO batch:31
[ 0.000000] Normal zone: 12248 pages used for memmap
[ 0.000000] Normal zone: 771624 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 0000000000091000 - 0000000000092000
[ 0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
[ 0.000000] PM: Registered nosave memory: 00000000a9b08000 - 00000000a9d0a000
[ 0.000000] PM: Registered nosave memory: 00000000b8bbd000 - 00000000baeef000
[ 0.000000] PM: Registered nosave memory: 00000000baeef000 - 00000000baf9f000
[ 0.000000] PM: Registered nosave memory: 00000000baf9f000 - 00000000bafff000
[ 0.000000] PM: Registered nosave memory: 00000000bb000000 - 00000000bfa00000
[ 0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000
[ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
[ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff980000
[ 0.000000] PM: Registered nosave memory: 00000000ff980000 - 0000000100000000
[ 0.000000] e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8801bf200000 s83392 r8192 d23104 u262144
[ 0.000000] pcpu-alloc: s83392 r8192 d23104 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1510750
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=UUID=d82f8994-80dd-4a77-b412-e5c80ed3a648 init=/bin/systemd ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 5976800k/7329792k available (4635k kernel code, 1172240k absent, 180752k reserved, 4212k data, 756k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 25165824 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.003333] Detected 2095.199 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4192.99 BogoMIPS (lpj=6983996)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000029] Security Framework initialized
[ 0.000032] AppArmor: AppArmor disabled by boot time parameter
[ 0.000536] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002814] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003825] Mount-cache hash table entries: 256
[ 0.004001] Initializing cgroup subsys cpuacct
[ 0.004003] Initializing cgroup subsys memory
[ 0.004010] Initializing cgroup subsys devices
[ 0.004011] Initializing cgroup subsys freezer
[ 0.004013] Initializing cgroup subsys net_cls
[ 0.004014] Initializing cgroup subsys blkio
[ 0.004041] CPU: Physical Processor ID: 0
[ 0.004042] CPU: Processor Core ID: 0
[ 0.004047] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.004047] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.004468] mce: CPU supports 9 MCE banks
[ 0.004479] CPU0: Thermal monitoring handled by SMI
[ 0.004486] using mwait in idle threads.
[ 0.005585] ACPI: Core revision 20120320
[ 0.011701] ftrace: allocating 17956 entries in 71 pages
[ 0.021500] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.054455] CPU0: Intel(R) Core(TM) i7-3612QM CPU @ 2.10GHz stepping 09
[ 0.159031] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.159037] ... version: 3
[ 0.159038] ... bit width: 48
[ 0.159039] ... generic registers: 4
[ 0.159040] ... value mask: 0000ffffffffffff
[ 0.159041] ... max period: 000000007fffffff
[ 0.159042] ... fixed-purpose events: 3
[ 0.159042] ... event mask: 000000070000000f
[ 0.179107] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.204011] CPU1: Thermal monitoring handled by SMI
[ 0.230505] CPU2: Thermal monitoring handled by SMI
[ 0.257129] CPU3: Thermal monitoring handled by SMI
[ 0.283776] CPU4: Thermal monitoring handled by SMI
[ 0.310396] CPU5: Thermal monitoring handled by SMI
[ 0.337033] CPU6: Thermal monitoring handled by SMI
[ 0.192329] Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
[ 0.363659] CPU7: Thermal monitoring handled by SMI
[ 0.365735] Brought up 8 CPUs
[ 0.365738] Total of 8 processors activated (33536.98 BogoMIPS).
[ 0.373780] devtmpfs: initialized
[ 0.374895] PM: Registering ACPI NVS region [mem 0xbaeef000-0xbaf9efff] (720896 bytes)
[ 0.375626] NET: Registered protocol family 16
[ 0.375747] ACPI: bus type pci registered
[ 0.375822] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.375824] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.383503] PCI: Using configuration type 1 for base access
[ 0.384102] bio: create slab <bio-0> at 0
[ 0.384149] ACPI: Added _OSI(Module Device)
[ 0.384150] ACPI: Added _OSI(Processor Device)
[ 0.384152] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.384153] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.385637] ACPI: EC: Look up EC in DSDT
[ 0.387100] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.389537] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.390081] ACPI: SSDT 00000000bae8e018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.390462] ACPI: Dynamic OEM Table Load:
[ 0.390465] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.390752] ACPI: SSDT 00000000bae8fa98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.391161] ACPI: Dynamic OEM Table Load:
[ 0.391163] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.391295] ACPI: SSDT 00000000bae8dd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.391672] ACPI: Dynamic OEM Table Load:
[ 0.391674] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.394703] ACPI: Interpreter enabled
[ 0.394707] ACPI: (supports S0 S3 S4 S5)
[ 0.394729] ACPI: Using IOAPIC for interrupt routing
[ 0.399472] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.399631] ACPI: No dock devices found.
[ 0.399634] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.399955] \_SB_.PCI0:_OSC invalid UUID
[ 0.399956] _OSC request data:1 8 1f
[ 0.399960] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.400463] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.400465] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.400467] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.400470] pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xfeafffff]
[ 0.400499] PCI host bridge to bus 0000:00
[ 0.400501] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.400503] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.400504] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.400506] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff]
[ 0.400514] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.400553] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.400586] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.400607] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.400618] pci 0000:00:02.0: reg 10: [mem 0xf1400000-0xf17fffff 64bit]
[ 0.400625] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.400631] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f]
[ 0.400688] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.400712] pci 0000:00:14.0: reg 10: [mem 0xf1a00000-0xf1a0ffff 64bit]
[ 0.400788] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.400813] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.400835] pci 0000:00:16.0: reg 10: [mem 0xf1a15000-0xf1a1500f 64bit]
[ 0.400904] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.400941] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.400963] pci 0000:00:1a.0: reg 10: [mem 0xf1a1a000-0xf1a1a3ff]
[ 0.401059] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.401089] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.401105] pci 0000:00:1b.0: reg 10: [mem 0xf1a10000-0xf1a13fff 64bit]
[ 0.401178] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.401208] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.401338] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.401377] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
[ 0.401462] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.401500] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.401523] pci 0000:00:1d.0: reg 10: [mem 0xf1a19000-0xf1a193ff]
[ 0.401619] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.401647] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[ 0.401780] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
[ 0.401801] pci 0000:00:1f.2: reg 10: [io 0x4098-0x409f]
[ 0.401810] pci 0000:00:1f.2: reg 14: [io 0x40bc-0x40bf]
[ 0.401819] pci 0000:00:1f.2: reg 18: [io 0x4090-0x4097]
[ 0.401828] pci 0000:00:1f.2: reg 1c: [io 0x40b8-0x40bb]
[ 0.401836] pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f]
[ 0.401845] pci 0000:00:1f.2: reg 24: [mem 0xf1a18000-0xf1a187ff]
[ 0.401894] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.401915] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.401932] pci 0000:00:1f.3: reg 10: [mem 0xf1a14000-0xf1a140ff 64bit]
[ 0.401955] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
[ 0.402021] pci 0000:01:00.0: [10de:0de9] type 00 class 0x030000
[ 0.402029] pci 0000:01:00.0: reg 10: [mem 0xf0000000-0xf0ffffff]
[ 0.402037] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.402045] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.402051] pci 0000:01:00.0: reg 24: [io 0x3000-0x307f]
[ 0.402057] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
[ 0.408664] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.408668] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.408673] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff]
[ 0.408679] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.408829] pci 0000:02:00.0: [8086:0887] type 00 class 0x028000
[ 0.408878] pci 0000:02:00.0: reg 10: [mem 0xf1900000-0xf1901fff 64bit]
[ 0.409114] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.415393] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.415401] pci 0000:00:1c.0: bridge window [mem 0xf1900000-0xf19fffff]
[ 0.415477] pci 0000:03:00.0: [1969:1091] type 00 class 0x020000
[ 0.415507] pci 0000:03:00.0: reg 10: [mem 0xf1800000-0xf183ffff 64bit]
[ 0.415522] pci 0000:03:00.0: reg 18: [io 0x2000-0x207f]
[ 0.415656] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.421985] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.421992] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
[ 0.421999] pci 0000:00:1c.4: bridge window [mem 0xf1800000-0xf18fffff]
[ 0.422039] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.422128] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.422157] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.422191] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 0.422264] \_SB_.PCI0:_OSC invalid UUID
[ 0.422265] _OSC request data:1 1f 1f
[ 0.422269] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.422308] \_SB_.PCI0:_OSC invalid UUID
[ 0.422309] _OSC request data:1 0 1d
[ 0.422312] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 0.422313] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.424783] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.424828] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.424869] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.424909] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.424949] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.424990] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.425029] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.425070] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.425144] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.425150] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.425152] vgaarb: loaded
[ 0.425153] vgaarb: bridge control possible 0000:01:00.0
[ 0.425154] vgaarb: no bridge control possible 0000:00:02.0
[ 0.425181] PCI: Using ACPI for IRQ routing
[ 0.426847] PCI: pci_cache_line_size set to 64 bytes
[ 0.426965] e820: reserve RAM buffer [mem 0x00091c00-0x0009ffff]
[ 0.426967] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.426968] e820: reserve RAM buffer [mem 0xa9b08000-0xabffffff]
[ 0.426969] e820: reserve RAM buffer [mem 0xb8bbd000-0xbbffffff]
[ 0.426971] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
[ 0.426972] e820: reserve RAM buffer [mem 0x1bf600000-0x1bfffffff]
[ 0.427052] NetLabel: Initializing
[ 0.427053] NetLabel: domain hash size = 128
[ 0.427054] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.427065] NetLabel: unlabeled traffic allowed by default
[ 0.427081] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.427086] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.429098] Switching to clocksource hpet
[ 0.433798] pnp: PnP ACPI init
[ 0.433809] ACPI: bus type pnp registered
[ 0.434098] pnp 00:00: [bus 00-3e]
[ 0.434100] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.434102] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.434104] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.434106] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.434108] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.434109] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.434111] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.434112] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.434114] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.434115] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.434117] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.434119] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.434120] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.434122] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.434123] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.434125] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.434126] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.434128] pnp 00:00: [mem 0xbfa00000-0xfeafffff window]
[ 0.434131] pnp 00:00: [mem 0x00010000-0x0001ffff window]
[ 0.434171] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.434183] pnp 00:01: [io 0x0000-0x001f]
[ 0.434185] pnp 00:01: [io 0x0081-0x0091]
[ 0.434186] pnp 00:01: [io 0x0093-0x009f]
[ 0.434187] pnp 00:01: [io 0x00c0-0x00df]
[ 0.434189] pnp 00:01: [dma 4]
[ 0.434208] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.434277] pnp 00:02: [mem 0xfed00000-0xfed003ff]
[ 0.434297] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.434305] pnp 00:03: [io 0x00f0]
[ 0.434313] pnp 00:03: [irq 13]
[ 0.434331] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.434340] pnp 00:04: [io 0x002e-0x002f]
[ 0.434342] pnp 00:04: [io 0x004e-0x004f]
[ 0.434343] pnp 00:04: [io 0x0061]
[ 0.434345] pnp 00:04: [io 0x0063]
[ 0.434346] pnp 00:04: [io 0x0065]
[ 0.434347] pnp 00:04: [io 0x0067]
[ 0.434348] pnp 00:04: [io 0x0068]
[ 0.434350] pnp 00:04: [io 0x006c]
[ 0.434351] pnp 00:04: [io 0x0070]
[ 0.434352] pnp 00:04: [io 0x0080]
[ 0.434354] pnp 00:04: [io 0x0092]
[ 0.434355] pnp 00:04: [io 0x00b2-0x00b3]
[ 0.434357] pnp 00:04: [io 0x0680-0x069f]
[ 0.434358] pnp 00:04: [io 0x1000-0x1003]
[ 0.434360] pnp 00:04: [io 0x1004-0x1013]
[ 0.434361] pnp 00:04: [io 0xffff]
[ 0.434362] pnp 00:04: [io 0x0400-0x0453]
[ 0.434364] pnp 00:04: [io 0x0458-0x047f]
[ 0.434365] pnp 00:04: [io 0x0500-0x057f]
[ 0.434367] pnp 00:04: [io 0x164e-0x164f]
[ 0.434401] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.434403] system 00:04: [io 0x1000-0x1003] has been reserved
[ 0.434405] system 00:04: [io 0x1004-0x1013] has been reserved
[ 0.434407] system 00:04: [io 0xffff] has been reserved
[ 0.434408] system 00:04: [io 0x0400-0x0453] has been reserved
[ 0.434412] system 00:04: [io 0x0458-0x047f] has been reserved
[ 0.434413] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.434415] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.434418] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.434424] pnp 00:05: [io 0x0070-0x0077]
[ 0.434429] pnp 00:05: [irq 8]
[ 0.434447] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.434469] pnp 00:06: [io 0x0454-0x0457]
[ 0.434498] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.434500] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.434518] pnp 00:07: [io 0x0060]
[ 0.434519] pnp 00:07: [io 0x0064]
[ 0.434524] pnp 00:07: [irq 1]
[ 0.434542] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.434556] pnp 00:08: [irq 12]
[ 0.434577] pnp 00:08: Plug and Play ACPI device, IDs DLL0563 PNP0f13 (active)
[ 0.434663] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[ 0.434665] pnp 00:09: [mem 0xfed10000-0xfed17fff]
[ 0.434666] pnp 00:09: [mem 0xfed18000-0xfed18fff]
[ 0.434668] pnp 00:09: [mem 0xfed19000-0xfed19fff]
[ 0.434669] pnp 00:09: [mem 0xf8000000-0xfbffffff]
[ 0.434671] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
[ 0.434674] pnp 00:09: [mem 0xfed90000-0xfed93fff]
[ 0.434675] pnp 00:09: [mem 0xfed45000-0xfed8ffff]
[ 0.434677] pnp 00:09: [mem 0xff000000-0xffffffff]
[ 0.434678] pnp 00:09: [mem 0xfee00000-0xfeefffff]
[ 0.434680] pnp 00:09: [mem 0xfffff000-0xffffffff]
[ 0.434692] pnp 00:09: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
[ 0.434716] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.434718] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.434720] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.434724] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.434726] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.434728] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.434729] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.434731] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.434733] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.434735] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.434738] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.434873] pnp 00:0a: [irq 20]
[ 0.434908] pnp 00:0a: Plug and Play ACPI device, IDs SMO8810 (active)
[ 0.435037] pnp: PnP ACPI: found 11 devices
[ 0.435038] ACPI: ACPI bus type pnp unregistered
[ 0.441308] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[ 0.441343] pci 0000:01:00.0: BAR 6: assigned [mem 0xf1000000-0xf107ffff pref]
[ 0.441346] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.441348] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.441351] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff]
[ 0.441354] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.441357] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.441365] pci 0000:00:1c.0: bridge window [mem 0xf1900000-0xf19fffff]
[ 0.441376] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.441380] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
[ 0.441385] pci 0000:00:1c.4: bridge window [mem 0xf1800000-0xf18fffff]
[ 0.441416] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.441417] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.441419] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.441421] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff]
[ 0.441423] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.441424] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf10fffff]
[ 0.441426] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.441428] pci_bus 0000:02: resource 1 [mem 0xf1900000-0xf19fffff]
[ 0.441430] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.441431] pci_bus 0000:03: resource 1 [mem 0xf1800000-0xf18fffff]
[ 0.441455] NET: Registered protocol family 2
[ 0.441606] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.442253] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.443404] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.443530] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.443532] TCP: reno registered
[ 0.443545] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.443573] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.443649] NET: Registered protocol family 1
[ 0.443665] pci 0000:00:02.0: Boot video device
[ 0.443857] PCI: CLS 64 bytes, default 64
[ 0.443898] Unpacking initramfs...
[ 0.524594] Freeing initrd memory: 4272k freed
[ 0.525006] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.525009] software IO TLB [mem 0xb4bb5000-0xb8bb4fff] (64MB) mapped at [ffff8800b4bb5000-ffff8800b8bb4fff]
[ 0.525035] Simple Boot Flag at 0x66 set to 0x1
[ 0.525591] audit: initializing netlink socket (disabled)
[ 0.525605] type=2000 audit(1346890587.416:1): initialized
[ 0.537548] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.539121] VFS: Disk quotas dquot_6.5.2
[ 0.539160] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.539239] msgmni has been set to 11681
[ 0.539402] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.539428] io scheduler noop registered
[ 0.539429] io scheduler deadline registered
[ 0.539472] io scheduler cfq registered (default)
[ 0.539562] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.539781] intel_idle: does not run on family 6 model 58
[ 0.539802] GHES: HEST is not enabled!
[ 0.539845] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.540251] Linux agpgart interface v0.103
[ 0.540326] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.543170] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.543180] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.543280] mousedev: PS/2 mouse device common for all mice
[ 0.543339] rtc_cmos 00:05: RTC can wake from S4
[ 0.543469] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.543497] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.543504] cpuidle: using governor ladder
[ 0.543505] cpuidle: using governor menu
[ 0.543615] drop_monitor: Initializing network drop monitor service
[ 0.543681] TCP: cubic registered
[ 0.543775] NET: Registered protocol family 10
[ 0.543922] NET: Registered protocol family 17
[ 0.543929] Key type dns_resolver registered
[ 0.544034] PM: Hibernation image not present or could not be loaded.
[ 0.544041] registered taskstats version 1
[ 0.544624] rtc_cmos 00:05: setting system clock to 2012-09-06 00:16:27 UTC (1346890587)
[ 0.545879] Freeing unused kernel memory: 756k freed
[ 0.545973] Write protecting the kernel read-only data: 8192k
[ 0.549070] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.550319] Freeing unused kernel memory: 1496k freed
[ 0.552089] Freeing unused kernel memory: 616k freed
[ 0.558894] systemd-udevd[65]: starting version 189
[ 0.582757] ACPI: bus type usb registered
[ 0.582800] usbcore: registered new interface driver usbfs
[ 0.582936] usbcore: registered new interface driver hub
[ 0.582976] usbcore: registered new device driver usb
[ 0.583958] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 0.583964] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.583974] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.584030] SCSI subsystem initialized
[ 0.584086] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.584107] xhci_hcd 0000:00:14.0: irq 21, io mem 0xf1a00000
[ 0.584174] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[ 0.584419] xHCI xhci_add_endpoint called for root hub
[ 0.584420] xHCI xhci_check_bandwidth called for root hub
[ 0.584494] hub 1-0:1.0: USB hub found
[ 0.584502] hub 1-0:1.0: 4 ports detected
[ 0.584759] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.584766] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.584992] xHCI xhci_add_endpoint called for root hub
[ 0.584995] xHCI xhci_check_bandwidth called for root hub
[ 0.585094] hub 2-0:1.0: USB hub found
[ 0.585104] hub 2-0:1.0: 4 ports detected
[ 0.585499] libata version 3.00 loaded.
[ 0.588991] ahci 0000:00:1f.2: version 3.0
[ 0.589075] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 0.589349] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.602251] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xb impl RAID mode
[ 0.602269] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 0.602274] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.616023] scsi0 : ahci
[ 0.616092] scsi1 : ahci
[ 0.616153] scsi2 : ahci
[ 0.616214] scsi3 : ahci
[ 0.616273] scsi4 : ahci
[ 0.616332] scsi5 : ahci
[ 0.616538] ata1: SATA max UDMA/133 abar m2048@0xf1a18000 port 0xf1a18100 irq 42
[ 0.616542] ata2: SATA max UDMA/133 abar m2048@0xf1a18000 port 0xf1a18180 irq 42
[ 0.616543] ata3: DUMMY
[ 0.616546] ata4: SATA max UDMA/133 abar m2048@0xf1a18000 port 0xf1a18280 irq 42
[ 0.616547] ata5: DUMMY
[ 0.616548] ata6: DUMMY
[ 0.616617] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.616622] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 0.616643] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.616682] ehci_hcd 0000:00:1a.0: debug port 2
[ 0.620565] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 0.620581] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf1a1a000
[ 0.628855] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.629004] hub 3-0:1.0: USB hub found
[ 0.629007] hub 3-0:1.0: 2 ports detected
[ 0.629119] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.629123] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 0.629131] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 0.629158] ehci_hcd 0000:00:1d.0: debug port 2
[ 0.633029] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 0.633043] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf1a19000
[ 0.642172] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.642305] hub 4-0:1.0: USB hub found
[ 0.642308] hub 4-0:1.0: 2 ports detected
[ 0.935078] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.935120] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.935143] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.935643] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 0.935747] ata2.00: ATA-8: SAMSUNG SSD PM830 mSATA 32GB, CXM12D1Q, max UDMA/133
[ 0.935750] ata2.00: 62533296 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.936071] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 0.936178] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 0.936194] ata2.00: configured for UDMA/133
[ 0.936410] ata1.00: ATA-8: ST9500423AS, 0005DEM1, max UDMA/133
[ 0.936413] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 0.936930] ata4.00: ATAPI: Optiarc DVD+/-RW AD-7760H, 100A, max UDMA/100
[ 0.937576] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 0.937816] ata1.00: configured for UDMA/133
[ 0.937948] scsi 0:0:0:0: Direct-Access ATA ST9500423AS 0005 PQ: 0 ANSI: 5
[ 0.938109] scsi 1:0:0:0: Direct-Access ATA SAMSUNG SSD PM83 CXM1 PQ: 0 ANSI: 5
[ 0.938398] usb 3-1: new high-speed USB device number 2 using ehci_hcd
[ 0.939037] ata4.00: configured for UDMA/100
[ 0.939846] scsi 3:0:0:0: CD-ROM Optiarc DVD+-RW AD-7760H 100A PQ: 0 ANSI: 5
[ 0.943656] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 0.943660] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 0.943681] sd 1:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 0.943714] sd 0:0:0:0: [sda] Write Protect is off
[ 0.943718] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.943724] sd 1:0:0:0: [sdb] Write Protect is off
[ 0.943727] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.943741] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.943747] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.944509] sdb: sdb1 sdb2
[ 0.945572] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 0.946927] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.946931] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.947081] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 0.963889] sda: sda1 sda2 sda3
[ 0.964204] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.062133] hub 3-1:1.0: USB hub found
[ 1.062211] hub 3-1:1.0: 6 ports detected
[ 1.168051] usb 4-1: new high-speed USB device number 2 using ehci_hcd
[ 1.213226] device-mapper: uevent: version 1.0.3
[ 1.213424] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
[ 1.276450] PM: Marking nosave pages: [mem 0x00091000-0x000fffff]
[ 1.276454] PM: Marking nosave pages: [mem 0x20000000-0x201fffff]
[ 1.276463] PM: Marking nosave pages: [mem 0x40004000-0x40004fff]
[ 1.276464] PM: Marking nosave pages: [mem 0xa9b08000-0xa9d09fff]
[ 1.276472] PM: Marking nosave pages: [mem 0xb8bbd000-0xbaffefff]
[ 1.276610] PM: Marking nosave pages: [mem 0xbb000000-0xffffffff]
[ 1.277660] PM: Basic memory bitmaps created
[ 1.291821] hub 4-1:1.0: USB hub found
[ 1.291868] hub 4-1:1.0: 8 ports detected
[ 1.304019] PM: Basic memory bitmaps freed
[ 1.339957] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.357933] usb 3-1.1: new full-speed USB device number 3 using ehci_hcd
[ 1.391312] systemd[1]: systemd 189 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
[ 1.401880] systemd[1]: Inserted module 'autofs4'
[ 1.402170] systemd[1]: Set hostname to <terpsichore>.
[ 1.471937] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
[ 1.472129] systemd[1]: Socket service syslog.service not loaded, refusing.
[ 1.507714] usb 3-1.3: new high-speed USB device number 4 using ehci_hcd
[ 1.508313] EXT4-fs (sdb2): re-mounted. Opts: data=ordered
[ 1.524185] Refined TSC clocksource calibration: 2095.240 MHz.
[ 1.524191] Switching to clocksource tsc
[ 1.604180] systemd-udevd[163]: starting version 189
[ 1.655435] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
[ 1.657449] usb 3-1.5: new high-speed USB device number 5 using ehci_hcd
[ 1.658975] scsi6 : SCSI emulation for RTS5139 USB card reader
[ 1.659116] scsi 6:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
[ 1.660458] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 1.660939] systemd-journald[190]: Successfully opened /dev/kmsg for logging.
[ 1.661078] usbcore: registered new interface driver rts5139
[ 1.661706] systemd-journald[190]: Fixed max_use=292.1M max_size=36.5M min_size=64.0K keep_free=146.0M
[ 1.661743] systemd-journald[190]: Reserving 66488 entries in hash table.
[ 1.662504] systemd-journald[190]: Vacuuming...
[ 1.662528] systemd-journald[190]: Flushing /dev/kmsg...
[ 1.683693] systemd-journald[190]: systemd-journald running as pid 190
[ 1.764293] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.764298] ACPI: Power Button [PWRB]
[ 1.764340] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 1.764343] ACPI: Sleep Button [SLPB]
[ 1.764383] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 1.764726] ACPI: Lid Switch [LID0]
[ 1.764772] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 1.764775] ACPI: Power Button [PWRF]
[ 1.765220] ACPI: Requesting acpi_cpufreq
[ 1.770962] Monitor-Mwait will be used to enter C-1 state
[ 1.770993] Monitor-Mwait will be used to enter C-2 state
[ 1.771014] Monitor-Mwait will be used to enter C-3 state
[ 1.771030] ACPI: acpi_idle registered with cpuidle
[ 1.800860] mei 0000:00:16.0: setting latency timer to 64
[ 1.800980] mei 0000:00:16.0: irq 43 for MSI/MSI-X
[ 1.802850] mei 0000:00:16.0: wd: failed to find the client
[ 1.807828] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.807831] ACPI: Thermal Zone [TZ00] (59 C)
[ 1.808737] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.808742] ACPI: Thermal Zone [TZ01] (59 C)
[ 1.815513] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 1.815623] ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
[ 1.815628] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.854381] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 1.876263] Linux media interface: v0.10
[ 1.890511] usb 4-1.5: new full-speed USB device number 3 using ehci_hcd
[ 1.933059] Adding 1048572k swap on /dev/sdb1. Priority:1 extents:1 across:1048572k SS
[ 1.970336] ACPI: AC Adapter [ADP0] (off-line)
[ 1.987531] Bluetooth: Core ver 2.16
[ 1.987554] NET: Registered protocol family 31
[ 1.987557] Bluetooth: HCI device and connection manager initialized
[ 1.987560] Bluetooth: HCI socket layer initialized
[ 1.987562] Bluetooth: L2CAP socket layer initialized
[ 1.987567] Bluetooth: SCO socket layer initialized
[ 1.991833] usbcore: registered new interface driver btusb
[ 2.014246] ACPI: Battery Slot [BAT0] (battery present)
[ 2.015220] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[ 2.015226] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.015230] ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
[ 2.015234] ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20120320/utaddress-251)
[ 2.015237] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.015238] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.017332] Linux video capture interface: v2.00
[ 2.018232] cfg80211: Calling CRDA to update world regulatory domain
[ 2.020368] wmi: Mapper loaded
[ 2.020751] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
[ 2.020817] Registered led device: dell-laptop::touchpad
[ 2.020838] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 2.021917] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 2.022214] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12
[ 2.022234] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 2.024342] [drm] Initialized drm 1.1.0 20060810
[ 2.025546] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_E4HD (0c45:648b)
[ 2.030462] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 2.035233] iwlwifi: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 2.035235] iwlwifi: Copyright(c) 2003-2012 Intel Corporation
[ 2.035339] iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000
[ 2.035340] iwlwifi 0000:02:00.0: pci_resource_base = ffffc900057b4000
[ 2.035341] iwlwifi 0000:02:00.0: HW Revision ID = 0xC4
[ 2.035459] iwlwifi 0000:02:00.0: irq 45 for MSI/MSI-X
[ 2.052021] input: Laptop_Integrated_Webcam_E4HD as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5/3-1.5:1.0/input/input6
[ 2.052208] usbcore: registered new interface driver uvcvideo
[ 2.052210] USB Video Class driver (1.1.1)
[ 2.068428] Adding 6291452k swap on /dev/sda2. Priority:2 extents:1 across:6291452k
[ 2.123628] iTCO_vendor_support: vendor-support=0
[ 2.125069] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 2.125159] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 2.125414] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.131861] input: Dell WMI hotkeys as /devices/virtual/input/input7
[ 2.131905] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x12
[ 2.137598] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x12
[ 2.138487] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x12
[ 2.139457] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x12
[ 2.139824] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1
[ 2.140145] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 2.140146] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 2.140147] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 2.140148] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
[ 2.140150] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_P2P disabled
[ 2.140151] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
[ 2.140246] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 2.140326] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x12
[ 2.140899] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x12
[ 2.141396] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x12
[ 2.142169] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 2.156973] iwlwifi 0000:02:00.0: device EEPROM VER=0x81c, CALIB=0x6
[ 2.156977] iwlwifi 0000:02:00.0: Device SKU: 0x150
[ 2.156981] iwlwifi 0000:02:00.0: Valid Tx ant: 0x3, Valid Rx ant: 0x3
[ 2.157005] iwlwifi 0000:02:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
[ 2.157164] Registered led device: phy0-led
[ 2.160206] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 2.534478] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered
[ 2.541531] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input8
[ 2.563251] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: data=ordered
[ 2.569980] hda_codec: CX20590: BIOS auto-probing.
[ 2.570943] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 2.579426] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 2.579647] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 2.579835] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 2.581548] i915 0000:00:02.0: setting latency timer to 64
[ 2.618193] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[ 2.618199] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.618200] [drm] Driver supports precise vblank timestamp query.
[ 2.618842] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 2.618843] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[ 2.738846] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 2.746529] iwlwifi 0000:02:00.0: Radio type=0x2-0x0-0x0
[ 2.789721] systemd-journald[190]: Received SIGUSR1
[ 3.009264] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 3.017266] iwlwifi 0000:02:00.0: Radio type=0x2-0x0-0x0
[ 3.099078] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3.175354] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 3.238677] EXT4-fs (sdb2): re-mounted. Opts: data=ordered,commit=600
[ 3.321400] EXT4-fs (sda1): re-mounted. Opts: data=ordered,commit=600
[ 3.328566] fbcon: inteldrmfb (fb0) is primary device
[ 3.328614] ata1: hard resetting link
[ 3.347779] EXT4-fs (dm-0): re-mounted. Opts: data=ordered,commit=600
[ 3.540518] Console: switching to colour frame buffer device 170x48
[ 3.546303] fb0: inteldrmfb frame buffer device
[ 3.546304] drm: registered panic notifier
[ 3.546637] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20120320/video-1149)
[ 3.546647] video: probe of LNXVIDEO:00 failed with error 5
[ 3.548193] acpi device:35: registered as cooling_device8
[ 3.548431] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.548633] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input13
[ 3.548880] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.647764] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.649009] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3.650611] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3.650834] ata1.00: configured for UDMA/133
[ 3.651101] ata1: EH complete
[ 3.651412] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 3.688734] ata2: hard resetting link
[ 4.007240] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4.008028] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 4.008723] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 4.008889] ata2.00: configured for UDMA/133
[ 4.008996] ata2: EH complete
[ 4.009201] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 23.639935] wlan0: authenticate with e0:5f:b9:36:70:c0
[ 23.651690] wlan0: send auth to e0:5f:b9:36:70:c0 (try 1/3)
[ 23.654492] wlan0: authenticated
[ 23.657882] wlan0: associate with e0:5f:b9:36:70:c0 (try 1/3)
[ 23.660558] wlan0: RX AssocResp from e0:5f:b9:36:70:c0 (capab=0x431 status=0 aid=4)
[ 23.663848] wlan0: associated
[ 23.665104] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1015.614597] ACPI Warning: _BQC returned an invalid level (20120320/video-472)
Some devices reported in powertop, that I do not know what are doing:
The battery reports a discharge rate of 18.8 W
Usage Device name
32.2 ops/s GPU
4.8% CPU use
100.0% Radio device: btusb
100.0% Radio device: iwlwifi
205.7 pkts/s Network interface: wlan0 (iwlwifi)
9.8% Display backlight
100.0% Audio codec hwC0D3: Intel
100.0% Audio codec hwC0D0: Conexant
0.0% USB device: usb-device-8087-0024
0.0% USB device: EHCI Host Controller
0.0% USB device: Laptop_Integrated_Webcam_E4HD (CNFB183F3040100006Y2)
0.0% USB device: usb-device-8087-07da
0.0% Display backlight
100.0% PCI Device: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 5
100.0% PCI Device: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port
100.0% PCI Device: Intel Corporation 3rd Gen Core processor DRAM Controller
100.0% PCI Device: Intel Corporation 3rd Gen Core processor Graphics Controller
100.0% USB device: EHCI Host Controller
100.0% USB device: usb-device-8087-0024
100.0% USB device: USB2.0-CRW (Generic)
100.0% PCI Device: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1
100.0% PCI Device: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2
100.0% PCI Device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller
100.0% PCI Device: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1
100.0% PCI Device: Intel Corporation HM77 Express Chipset LPC Controller
100.0% PCI Device: Intel Corporation 82801 Mobile SATA Controller [RAID mode]
100.0% PCI Device: Intel Corporation Centrino Wireless-N 2230
0.0% PCI Device: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller
0.0% USB device: xHCI Host Controller
0.0% USB device: xHCI Host Controller
0.0% PCI Device: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1
0.0% USB device: usb-device-138a-0011
Have played with laptop-mode, here is my config
egrep -v '^#|^$' laptop-mode.conf conf.d/*
laptop-mode.conf:ENABLE_LAPTOP_MODE_TOOLS=1
laptop-mode.conf:VERBOSE_OUTPUT=0
laptop-mode.conf:LOG_TO_SYSLOG=1
laptop-mode.conf:DEBUG=0
laptop-mode.conf:ENABLE_LAPTOP_MODE_ON_BATTERY=1
laptop-mode.conf:ENABLE_LAPTOP_MODE_ON_AC=0
laptop-mode.conf:ENABLE_LAPTOP_MODE_WHEN_LID_CLOSED=0
laptop-mode.conf:ENABLE_AUTO_MODULES=1
laptop-mode.conf:MINIMUM_BATTERY_CHARGE_PERCENT=3
laptop-mode.conf:DISABLE_LAPTOP_MODE_ON_CRITICAL_BATTERY_LEVEL=1
laptop-mode.conf:HD="/dev/[hs]d[abcdefgh]"
laptop-mode.conf:PARTITIONS="auto /dev/mapper/*"
laptop-mode.conf:ASSUME_SCSI_IS_SATA=1
laptop-mode.conf:LM_BATT_MAX_LOST_WORK_SECONDS=600
laptop-mode.conf:LM_AC_MAX_LOST_WORK_SECONDS=600
laptop-mode.conf:CONTROL_READAHEAD=1
laptop-mode.conf:LM_READAHEAD=3072
laptop-mode.conf:NOLM_READAHEAD=768
laptop-mode.conf:CONTROL_NOATIME=1
laptop-mode.conf:USE_RELATIME=0
laptop-mode.conf:CONTROL_HD_IDLE_TIMEOUT=1
laptop-mode.conf:LM_AC_HD_IDLE_TIMEOUT_SECONDS=20
laptop-mode.conf:LM_BATT_HD_IDLE_TIMEOUT_SECONDS=20
laptop-mode.conf:NOLM_HD_IDLE_TIMEOUT_SECONDS=80
laptop-mode.conf:CONTROL_HD_POWERMGMT="auto"
laptop-mode.conf:BATT_HD_POWERMGMT=1
laptop-mode.conf:LM_AC_HD_POWERMGMT=1
laptop-mode.conf:NOLM_AC_HD_POWERMGMT=254
laptop-mode.conf:CONTROL_HD_WRITECACHE=1
laptop-mode.conf:NOLM_AC_HD_WRITECACHE=1
laptop-mode.conf:NOLM_BATT_HD_WRITECACHE=1
laptop-mode.conf:LM_HD_WRITECACHE=0
laptop-mode.conf:CONTROL_MOUNT_OPTIONS=1
laptop-mode.conf:LM_DIRTY_RATIO=60
laptop-mode.conf:NOLM_DIRTY_RATIO=15
laptop-mode.conf:LM_DIRTY_BACKGROUND_RATIO=1
laptop-mode.conf:NOLM_DIRTY_BACKGROUND_RATIO=4
laptop-mode.conf:DEF_UPDATE=5
laptop-mode.conf:DEF_XFS_AGE_BUFFER=15
laptop-mode.conf:DEF_XFS_SYNC_INTERVAL=30
laptop-mode.conf:DEF_XFS_BUFD_INTERVAL=1
laptop-mode.conf:DEF_MAX_AGE=30
laptop-mode.conf:XFS_HZ=100
laptop-mode.conf:LM_SECONDS_BEFORE_SYNC=2
conf.d/ac97-powersave.conf:CONTROL_AC97_POWER="auto"
conf.d/ac97-powersave.conf:DEBUG=0
conf.d/auto-hibernate.conf:DEBUG=0
conf.d/auto-hibernate.conf:ENABLE_AUTO_HIBERNATION=1
conf.d/auto-hibernate.conf:HIBERNATE_COMMAND=/usr/sbin/s2disk
conf.d/auto-hibernate.conf:AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT=1
conf.d/auto-hibernate.conf:AUTO_HIBERNATION_ON_CRITICAL_BATTERY_LEVEL=1
conf.d/battery-level-polling.conf:DEBUG=0
conf.d/battery-level-polling.conf:ENABLE_BATTERY_LEVEL_POLLING=0
conf.d/battery-level-polling.conf:BLACKLIST_IN_FLOCK=1
conf.d/bluetooth.conf:DEBUG=0
conf.d/bluetooth.conf:CONTROL_BLUETOOTH=1
conf.d/bluetooth.conf:BATT_ENABLE_BLUETOOTH=0
conf.d/bluetooth.conf:AC_ENABLE_BLUETOOTH=1
conf.d/bluetooth.conf:BLUETOOTH_INTERFACES="hci0"
conf.d/configuration-file-control.conf:DEBUG=0
conf.d/configuration-file-control.conf:CONTROL_CONFIG_FILES=0
conf.d/configuration-file-control.conf:CONFIG_FILES="/etc/syslog.conf /etc/syslog-ng/syslog-ng.conf /etc/rsyslog.conf"
conf.d/configuration-file-control.conf:CONFIG_FILE_SIGNAL_PROGRAMS="syslogd syslog-ng rsyslogd"
conf.d/configuration-file-control.conf:CONFIG_FILE_RELOAD_SERVICES=""
conf.d/cpufreq.conf:DEBUG=0
conf.d/cpufreq.conf:CONTROL_CPU_FREQUENCY="auto"
conf.d/cpufreq.conf:BATT_CPU_MAXFREQ=slowest
conf.d/cpufreq.conf:BATT_CPU_MINFREQ=slowest
conf.d/cpufreq.conf:BATT_CPU_GOVERNOR=conservative
conf.d/cpufreq.conf:BATT_CPU_IGNORE_NICE_LOAD=1
conf.d/cpufreq.conf:LM_AC_CPU_MAXFREQ=slowest
conf.d/cpufreq.conf:LM_AC_CPU_MINFREQ=slowest
conf.d/cpufreq.conf:LM_AC_CPU_GOVERNOR=conservative
conf.d/cpufreq.conf:LM_AC_CPU_IGNORE_NICE_LOAD=1
conf.d/cpufreq.conf:NOLM_AC_CPU_MAXFREQ=fastest
conf.d/cpufreq.conf:NOLM_AC_CPU_MINFREQ=slowest
conf.d/cpufreq.conf:NOLM_AC_CPU_GOVERNOR=performance
conf.d/cpufreq.conf:NOLM_AC_CPU_IGNORE_NICE_LOAD=0
conf.d/cpufreq.conf:CONTROL_CPU_THROTTLING=0
conf.d/cpufreq.conf:BATT_CPU_THROTTLING=maximum
conf.d/cpufreq.conf:LM_AC_CPU_THROTTLING=maximum
conf.d/cpufreq.conf:NOLM_AC_CPU_THROTTLING=minimum
conf.d/dpms-standby.conf:DEBUG=0
conf.d/dpms-standby.conf:CONTROL_DPMS_STANDBY="auto"
conf.d/dpms-standby.conf:BATT_DPMS_STANDBY=300
conf.d/dpms-standby.conf:LM_AC_DPMS_STANDBY=300
conf.d/dpms-standby.conf:NOLM_AC_DPMS_STANDBY=1200
conf.d/eee-superhe.conf:DEBUG=0
conf.d/eee-superhe.conf:CONTROL_SUPERHE="auto"
conf.d/eee-superhe.conf:
conf.d/eee-superhe.conf:BATT_SUPERHE=2
conf.d/eee-superhe.conf:LM_AC_SUPERHE=2
conf.d/eee-superhe.conf:NOLM_AC_SUPERHE=0
conf.d/ethernet.conf:DEBUG=0
conf.d/ethernet.conf:CONTROL_ETHERNET="auto"
conf.d/ethernet.conf:BATT_THROTTLE_ETHERNET=1
conf.d/ethernet.conf:LM_AC_THROTTLE_ETHERNET=1
conf.d/ethernet.conf:NOLM_AC_THROTTLE_ETHERNET=0
conf.d/ethernet.conf:THROTTLE_SPEED="slowest"
conf.d/ethernet.conf:DISABLE_WAKEUP_ON_LAN=1
conf.d/ethernet.conf:ETHERNET_DEVICES="eth0"
conf.d/ethernet.conf:DISABLE_ETHERNET_ON_BATTERY=0
conf.d/exec-commands.conf:CONTROL_EXEC_COMMANDS="auto"
conf.d/exec-commands.conf:DEBUG=0
conf.d/exec-commands.conf:BATT_EXEC_COMMAND_0="" # Enable power saving feature 0 here
conf.d/exec-commands.conf:LM_AC_EXEC_COMMAND_0="" # Enable power saving feature 0 here
conf.d/exec-commands.conf:NOLM_AC_EXEC_COMMAND_0="" # Disable power saving feature 0 here
conf.d/exec-commands.conf:BATT_EXEC_COMMAND_1="" # Enable power saving feature 1 here
conf.d/exec-commands.conf:LM_AC_EXEC_COMMAND_1="" # Enable power saving feature 1 here
conf.d/exec-commands.conf:NOLM_AC_EXEC_COMMAND_1="" # Disable power saving feature 1 here
conf.d/exec-commands.conf:BATT_EXEC_COMMAND_2="" # Enable power saving feature 2 here
conf.d/exec-commands.conf:LM_AC_EXEC_COMMAND_2="" # Enable power saving feature 2 here
conf.d/exec-commands.conf:NOLM_AC_EXEC_COMMAND_2="" # Disable power saving feature 2 here
conf.d/exec-commands.conf:BATT_EXEC_COMMAND_3="" # Enable power saving feature 3 here
conf.d/exec-commands.conf:LM_AC_EXEC_COMMAND_3="" # Enable power saving feature 3 here
conf.d/exec-commands.conf:NOLM_AC_EXEC_COMMAND_3="" # Disable power saving feature 3 here
conf.d/exec-commands.conf:BATT_EXEC_COMMAND_4="" # Enable power saving feature 4 here
conf.d/exec-commands.conf:LM_AC_EXEC_COMMAND_4="" # Enable power saving feature 4 here
conf.d/exec-commands.conf:NOLM_AC_EXEC_COMMAND_4="" # Disable power saving feature 4 here
conf.d/exec-commands.conf:BATT_EXEC_COMMAND_5="" # Enable power saving feature 5 here
conf.d/exec-commands.conf:LM_AC_EXEC_COMMAND_5="" # Enable power saving feature 5 here
conf.d/exec-commands.conf:NOLM_AC_EXEC_COMMAND_5="" # Disable power saving feature 5 here
conf.d/exec-commands.conf:BATT_EXEC_COMMAND_6="" # Enable power saving feature 6 here
conf.d/exec-commands.conf:LM_AC_EXEC_COMMAND_6="" # Enable power saving feature 6 here
conf.d/exec-cfr wrote:
@lahwaacz,
Could you point me to documentation regarding bugs/problems with laptop-mode tools? I'm using that right now and it has always worked pretty well but I'm currently seeing higher temperatures (~10C higher on average) and trying to figure out why.
My fan operates continually but not, I think, very aggressively. But it has always done that so I assume it is normal for this laptop. (Have no idea really but it doesn't seem out of the way - it is a laptop, after all...)
I don't know anything about fan control, my laptop controls fan speed automatically, I can't even get current fan speed.
The main problem with laptop-mode-tools is that it's very huge, and the bigger the program is, the slower is the execution. Another problem is that it's connected to both battery and AC adapter ACPI events (see /etc/acpi/events/lm_{ac_adapter,battery}). On my laptop, those events are sent at the same time, resulting in running laptop-mode-tools twice. Most people once configure laptop-mode-tools to their liking and their hardware, so I think there is no need for such an extensive software like laptop-mode-tools, if something simpler does the same (or better) job.
Also laptop-mode-tools can conflict with pm-utils (which are installed on many systems as dependency for some packages):
https://wiki.archlinux.org/index.php/La … able_on_AC
https://bbs.archlinux.org/viewtopic.php?id=106989 -
Issue with fan or heat in macbook pro
Issue with fan or heat in macbook pro
arsal ahmed wrote:
Issue with fan or heat in macbook pro
What's the issue? -
Constant Fan Noise from Hard Drive
My power book runs with a constant 'fan' like noise from the hard drive (front left of pd)
My friend has same machine and has No sound,
checked with display models in Apple Store (ear right necxt to pb) - No sound
I have had this low level noise from new.
Anyone else have the same problem.
Johnhello there!
When I upgraded to 1.4.0 and I notice that ear piercing noise and it was quite annoying. I called Apple and they advised me to look into the activity monitor. And YES, it ws the anti virus that came with .mac that 1.4.2 for some reason did not like and the process was running for such a long time consuming the resources including of course HD. I removed the anti virus (which at this point was useless) and the machine was just wonderful again.
I think what I may say is that you may want to look for a process (using the activity monitor) which is eating the cpu alive - if you can remove it the better, else try to deal with. Good luck - an OSX convert! -
Constant fan noise on macbook pro
Hello, my macbook pro (mid 2010 model, 13 inch, 2.4 ghz intel core duo 2 running Mountain lion) is experiencing constant fan activity at very high speed. The CPU however is only used at 9% of its capabilities top. The problem occured after a freeze in adobe Lightroom, since then, the fan noise start as soon as the computer starts (except if i press some keys before i turn it on for some reason, the noise would come back if i shut down the computer and restart it, or simply close it). I'm dully aware that it is normal that the fan is constantly working, but not usually at such high speed (top speed of the system), I checked all the major solutions offered on the net so far with no success (reset SMC, reset Pram, checked if i had some printer activity on the waiting list, checked the activity monitor for any particular demanding activity or tasks and finally i tried to run an apple harware test to see if some temperature probes are broken on the motherboard, however my computer for some reason is not taken care of...).
I also would like to mentionned that i change the original hard-drive not long ago for a hybrid harddrive (seagate momentus XT), yet the problem did not start after the change.
if you do not think of any solutions, you could maybe tell me if its problematic for my computer's fan to run at full speed..
thank you very much for any help you could provide and sorry for the eventual mistakes in english (its not my first language).Re: Apple Hardware Test. There was no original install disk, as i downloaded mountain lion. While the connection was established to access to Apple hardware test, the test could not run on my mac, the AHT program said that my machine was not supported.
thank you for your diagnostic, it seemed to be a logical explanation, however, thanks to a monitor program i could check that my processor was running under normal temperatures (35°c to 75°c) so at least the temperature informations seems to be correctly assessed by the sensor. -
New hi-res G4: Constant fan noise
Hi,
I just received my brand-new 1.67 GHz PowerBook today, as a replacement for a year-old 1.33GHz PowerBook which was stolen from me.
The old 1.33 used to be silent as a graveyard during normal use. But the new 1.67 issues a constant fan noise. It is not very loud, but very noticable and definitely annoying. It is always present from start-up until shut-down, even if I am not running any applications.
Should I return it to Apple? Or are there any tests/fixes I can try?I have also got one of the latest PowerBooks and the fan noise is more noticeable than my previous 1.5Ghz model, however I wouldn't have even noticed it if I'd not had a previous model.
There have been some other similar postings on these discussion pages.
One of the criticisms of the previous model was that the underneath of the case could get very hot, I believe the fans run more often to cure this problem and in practice the PowerBook runs a lot cooler. It never gets hot, just a bit warm.
The fans still speed up when doing anything intensive, such as playing some of the high definition trailers I downloaded from the quicktime section of this website. Try it yourself and see if the fan noise increases after a short while. -
Powerbook 12 heat and constant fans
So apparently this is a common issue but there are not many threads on this and no solution at all.
I just wanted to ask other 12 inch Powerbook users.. are the fans on all the time (during basic tasks like web browsing) on your machine... and any solutions??In response to both authors, mine does the same, but it doesn't stay on all the time. But it does happen say, if I put my laptop on a desk with no air to breathe in between the underside, or when I put it on the couch.
When used on my lap, which I shouldn't be doing, but anyway, it will vary.
What I've done to solve the problem is to buy a laptop cooler and it really does work. It actually works better than the PowerBook's internal fans because for one, it doesn't generate heat (when my fans are on, it's because of the heat issue, but at the same time, it seems to circulate the heat as well, making it an infinite loop-- pun intended!!).
And with the laptop cooler, yes those fans are on constantly, but the laptop does not heat up.
I first tried Targus's laptop cooler (via OfficeMax) but found it aesthetically unpleasing, even though it is similar in color (aluminum colored plastic).
The one I ended up buying was a Micro Innovations laptop cooler from RadioShack (please don't laugh people), because it was black and matched my desk top--as opposed to the silver Targus one--and the best part is it's adjustable, so it works with my 12-inch PowerBook and my old Pismo. -
i have started noticing that my laptop (a305-s6898 satellite) has been getting really hot on the left half - front. i believe that the fan is still working because it is cool near the vent openings on the bottom. it is an uneven heat around the wrist area (on both sides of the touchpad) with the left being hotter than the right. the laptop has shut off before...and i've gotten the dreaded blue screen!! usually it is when i am watching videos. any help/suggestions would be appreciated
You should try to defragment your drive more often. The more you run it, the less time it will take to complete, and the drive will perform more efficiently. Clean up temp files and the registry using programs such as CCleaner and Glary Utilities(both free programs). I run these at least once a week on all of my computers. Then Defragment weekly either using the stock windows tool, or a programs such as Defraggler.
When I bought my Satellite M305, the system was sluggish, and the HDD ran very warm. The previous owner obviously never defragmented the hard drive(or knew how to keep the drive clean). My first defrag run lasted several days. After cleaning it up, removing viruses, and a few weeks of defragmenting regularly, it runs much faster, and defrags in minutes.
Qosmio X875 i7-3630QM, 32GB RAM, OCZ SSD Qosmio X505 i7-920XM, PM55, 16GB RAM, OCZ SSD
Satellite Pro L350 T9900, GM45, 8GB RAM , Intel 320 SSD (my baby) Satellite L655 i7-620M, HM55, 8GB RAM, Intel 710 SSD (travel system) -
New Presario CQ57 302A windows 7 . Fan runs constant, low noise, no heat. Is this ok or should it be quiet.
Have you tries a SMC reset?
http://support.apple.com/kb/ht3964
If there is no change, run an Apple Hardware Test:
http://support.apple.com/kb/ht1509
Ciao. -
Fun with fans and heat - post your temps
Well, after using the command to double-load my MBP, and after turning off all the loud machines in my bedroom, I finally got my MBP's fans to really get going. They make a very faint noise, but they were belching out firy air, as my MBP. My macbook pro runs at a somewhat reasonable 65-72C (156F average or so) when I run reasonable applications like Safari, iTunes, Adium, and Preview at once, loading the cores less than 10% each. The bottom is quite hot in the obvious places but the keyboard and palmrest are cool. The fans are not spinning in any way that I can detect at this temperature. I use Hardware Monitor 3.6 to test my CPU core's heat.
When other people load their cores, do they get super high heat? I get up to 90-100C even, and the fans get spinning. However the CPU core temp drops like lightning down to 70 seconds after I close the terminal windows and end the suffering. I don't know how normal this is, what other people's core fully loaded temperatures are, but I would like to.
Test core temps with this: http://www.versiontracker.com/dyn/moreinfo/macosx/24043
You may need to run http://macbricol.free.fr/coreduotemp/ this software first.
Then, load your cores by opening 2 instances of the terminal and running this line of code: yes> /dev/null
This all isn't fair. I tried to make my G4 12" get hot with this terminal command, and the hottest I got was 136F, while my Macbook Grill is running at over 200F.why have ya CPU's running with nothing with this yes> /dev/null when ya could be running seti@home or this http://distributed.net running something usefull that uses all ya avalible CPU cycles... and still at the same time testing the CPU temps...
-
My computer is all of sudden making a constant "fan" noise
For some reason my computer started today with a sound like a fan is constantly going.
Before this sound happened, my computer would not turn on. I proceeded to follow the steps (which I have to say is a royal pain in the butt to do) and yes, it finally turned on. But now I have this worry some noise as if it is over heating??
To further make matters even more confusing is now the battery indicator in the top right corner has an x in it and my battery charge indicator lights will not show up to tell me if my computer battery is fully charged AND my plug in cord's light does not turn on! The latter two problems just showed up AFTER my computer started up. The lights were before I had to turn the computer on the strange way. But now my computer is acting as though it doesn't recognize the battery! (It is the same battery!)I checked into your link and followed the directions to a "T", but still no luck! My Macbook Pro is brand new, I just bought it last November. I do not believe my battery is no good since everything was working properly except the fact that it wouldn't turn on. I had a full charge on my battery and my plug in light WAS showing green. During the time when I was attempting to turn on my computer, I noticed the plug in indicator light had turned orange. Now I have no light on it at all. Also, I am still able to use my computer if it is unplugged.
My problems continue to be:
1) Sounds like my fan is continually on and will not turn off.
2) My battery charge lights do not turn on.
3) The battery indicator icon (top right corner) shows an "x" in the middle of it.
4) My plug-in indicator light will not light up.
If my problem truly is the battery, what are my options? I don't even know how to get to the battery! -
Apple 20-inch with a 12-inch Powerbook = Constant Fan
Just picked up a 20-inch display for use with a 12-inch Powerbook.. I also have an Apple Bluetooth Keyboard and Mouse that I use.. The fan runs constantly when the powerbook is connected to the Apple Display.. Can anyone confirm if this is normal or if I should be worried.. Thanks
Just received a 20" ACD yesterday. I also purchased a Targus Chill Pad (USB-powered fan stand) having read that 12" PBs run hot with 20" ACDs, and I really like the combination. One possible solution to the heat generation might be to avoid using the USB and FW hubs on the ACD - I don't have mine plugged in and my PB has remained nice and cool - same temps. as before hooking up the ACD (~125 F for the graphics processor, according to Temperature Monitor). I haven't heard the PB's fan go on once, and I can barely hear the fans of the Chill Pad - I'd recommend that as a 25 dollar solution to people experiencing the overheating. I don't know if the lack of hub usage is keeping the heat down, but that may also be something others want to try.
-
Much better- and question about constant fan noise
i couldn't start anew thread a few minutes ago. I replied to 2 threads, then the startanew thread iconmagically appeard! I am not making it up.
any way- i posted a while back about noise. I thought it may be the hard drive. But definatley it sounds like the fan(s) in my MBP dual core
my MPB was silen when i first bough it. then a few month in it got noisy. Now thw fans are on all the time.
anyone else with a MPB that is just noisy? this *****! macs are almost always quiet. this is annoying acually. and it is non stop! i can't recal a moment when the fns were not winding like tiny air craft jet engines! LOL wel, it's not that funy actually.
the noise does change in pitch on occasion. sort of like they slow down a tiny bit. other wise they just hum away.
I had a G-4 I mac- SILENT! then a dual G-5 tower- it was quest until it roared up on a task, then it roared with power then got quiet again.
but this tiny mpbis just noisy!
Well, i hoope it is the fans, not the HD. It prettty much sounds like fans, and constant.
but considering theroom temp is abou 68 in here, whywould the fans be on? and non stop?
we live in a cold climate, so it's not a 100 weather.
any help with the fans and perhaps a test or a way to turn them down? does my system think the core is hot?
thanks for any helponly about 13% is a peak ap. nothing major, nor a lot of stuff. but nothing consuming 30 40 or more percent or anything. Nothing running except safar in this case, activity monitor.nothingexcessive like 10 aps , whihc i have done in the past as we know the macs can handle it
well, nothing seems out of the ordinary.
I included a pic from that FAN CONTROL AP- well was going to, but not sure how.
any way my stats from it are:
base speed, 1500 rpm (on both actually)
ower threshhold 122F
upper 176F
current temp at that moment was 101F
can someone compare their fans to mine and their temp- i assume it is the cpu core temp.
any way, not sure what is a safe range, nor why my fans are running non-stop.
just noisy? but like i said they do occilate a little ans slow and the hum gets deeper then they go back to normal which is a slightly higher pitch.
as for that iStat pro ap. i opened it and it just made my application dock bar flash then the dock came back. The Istat pro didn't open.
Um- it looks like a widget. I may have taken my widget ap of some time ago. I hve yahoo widgets on. but not sure how to get that istat to work. I can't even recall the name of the apple widget program.
thanksfor help on tracking this noise down-
are any of your guys's fans really noisy? is this common? mine is just non-stop but if my settings are off or if there is areason, then I can adjust it from there. just want to know what the "normal range" or operation of the fans are. but man they are noisy for a mbp. and they WERE QUIET when i first got this laptop.
thanks again -
Lacie 500GB External Hard Drive Fan speed / heat issues?
I have a 500gb Lacie Mini hard drive with the 1394/usb2.0 hub and for some reason when it is connected to my mac mini in the office, it works totally fine, doesnt spin really fast or anything. When I take it home and hook it up to my other mac mini, after 10-15 minutes the fan starts to blow at full speed on the Lacie. The mac mini at home is from March 2005 and its a 1.66 Core Duo, and the one at the office is from March 2007, and is also a 1.66 Core Duo, both with 2gb of ram.
I have noted at the bottom of my home mac mini is very warm to the touch after feeling between the drive and the computer, but it seems odd to me that both computers dont get just as hot considering they are virtually identical aside from the build date. Has anyone else experienced this problem with their Lacie mini drive? The fan spins so high on the drive that its annoying to even use it, and I'd like to take care of it if theres a remedy.
Thanks!I agree, the link you posted is strangely inaccurate. I have been trying to post the attempts on this link: http://www.123macmini.com/forums/viewtopic.php?p=109630#109630 but as you can tell I have been frustrated with the whole process. The posts may be confusing because they are step by step. The lacie drive is loud under the mini but not when it is by itself.
As of now the test seem to be inconclusive. It is so strange that I would be convinced if someone told me the fan in the lacie has a temperature sensor inside. But the only thing I can come up with is that the mini gets hot on the bottom, while the lacie gets hot on top. Their combined heat seems to be too much for the lacie's fan to cool. I will also mention that I have fan control software installed on the mini, but this doesn't seem to have any effect as I am not changing the settings during my tests.
The fan having a temperature sensor is just crazy... I removed the fan from the lacie (fan still plugged in) and set up the stack. The lacie bottom was removed for this test. The lacie fan never turned on, and the drive increased in temperature that I felt was too hot. This is where sensing strips would assist in further data.
So here is my next step: Since the fan didn't turn on when the lacie bottom was removed, it seems that the open back and open bottom (the back and bottom is one piece) was enough to keep the sensor from turning on the fan. But as said before, I felt the drive was still too hot. So maybe the lacie case needs more ventilation. Two ways I have thought to do this:
----- cut the fan one large hole instead of a bunch of little ones, allowing more air out.
- or -
----- cut the bottom vents out (maybe not all of them) to allow more air intake.
I think the first one would solve the problem, but I don't currently have the time to do it. I am going to cut the fan hole first, once I get the time.
I will tell you that the lacie drive is mounted closest to the top of the case. I have thought of purchasing some thermal sensing strips to determine what is hot and when; haven't yet.
AndyO, you said everything right except one part... the mini's air-intake is the vents on the bottom, and the air is obviously pushed out the back by the horizontal fan (there is a special plastic mold that the fan sits horizontally in). Which you would lead us to believe that the mini would heat up with the lacie underneath, but I haven't noticed any drastic changes in the mini fan speed or temperature. Instead the lacie drive gets hot or at least the fan goes crazy.
Hope this helps, I'll let you know when I get the scalpel (really sharp knife) out.
-p13th0r4 -
MacBook Fans Loud - Heat is HOT - Processor almost 90% Free! What gives?
Hiya
I have had my Macbook since boxing day, December 26, 06 and I LOVE IT!
The only thing is that these days, when I am not running anything that uses a lot of power, like Flash 8 or Photoshop, my Macbook starts to heat up and fans go to max almost and stays that way for a while...
I took some photos:
http://img243.imageshack.us/img243/8105/picture1me5.png
http://img296.imageshack.us/img296/6186/picture2ez5.png
I was only running Adium, Safari and iTunes and my fans were fully on at 6200 RPM and the heat was 50°C!!!
I hate this heat... What is up?
MacBook Black 2.0GHz - 1G of RAM - 120G of Memory Mac OS X (10.4.10) Old Computer: iMac G4 - 17" with 768MB of RAMYou might try to reset the SMC and/or PRAM.
Maybe you are looking for
-
Videos in 720p and in 1080p don't seem HD on my 13" rMBP
Is this normal?
-
BI services Filter on Dashboard
Dear All, I have following scenario, Profit center Structure Month Value PC1 Stru1 Jan 2000 PC1 Stru2 Jan 3000 PC2 Stru1 Jan 4000 PC2
-
I'm so stupid, please helpppp.............
.hi everyone, i'm using nokis x6-00 and i did reset of my fone by pressing *#7370# as i saw in some web site. now when i try to open music player i shows file corrupt. ... no other obvious problems so far. only the music player in the music folder h
-
I have bought a tv series and watched the episodes but no matter what i do with settings the memory is still being taken up on my ipad2? what can i do?
-
I am preparing to install Oracle EE 10g R1 on a Linux box that is being set up as I type. My customer does not want a TYPICAL install but the option to limit products. Trying to be proactive, I'm trying to find the list of products you get when you c