Constant freezing after updating to 35.0

Firefox constantly freezes after updating to 35.0. Anyway to revert back?

--Actually, unless it has changed recently i believe that it will be 34 I can go check though.
Actually it is version 35. I hope it works for you!!
-Jon

Similar Messages

Constant freezing after update?

I recently, maybe a week or so ago, did an update to my MBP (13", mid 2012 model purchased in 10/2013) (currently using 10.9.1). Ever since, my computer has been freezing 2+ times per day, and applications like Microsoft Office seem to completely forget that they were installed every time I have to restart my computer. Either the trackpad freezes, or I try to close one app and it goes unresponsive, followed by the others and then the finder until I have no option left but to shut it all down and restart. As a student, you can understand that this is frustrating and nerve-wracking. Is there a way to undo the update? is there a new one coming out? This is seriously so aggravating to have to walk away from my computer several times a day to see if it'll work itself out, and then to wait forever for impossibly long reboots. PLEASE help me!

Please read this whole message carefully, especially the warnings, before doing anything.
1. I can only guess which of the modifications you've made to your system is causing the problem. The changes suggested here should be considered provisional; they may not help, or they may remove functionality that you find useful. If a third-party system modification that you want to keep is at fault, refer to its developer for support.
2. WARNING: Back up all data now if you haven’t already done so. Before proceeding, you must be sure you can restore your system to its present state, even if it becomes unbootable. If you’re not sure you can do that, STOP — DON’T CHANGE ANYTHING.
If you don't like the results of the procedure suggested below, restore from your backup.
I will not be responsible for the consequences, and I will not be able to help, if you ignore this warning.
3. You should either remove or update the following system modification(s), if an update is available from the developer:
Wacom tablet driver
Google Drive
CUDA
and definitely remove at least the following:
† Sophos
4. Whatever you remove must be removed completely, and (unless otherwise specified in this message) the only way to do that is to use the uninstallation tool, if any, provided by the third-party developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job. I can't be more specific, because I don't install such things myself. Please do your own research.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button.
Again, please don't ask me to do this research for you. You can do it better than I can, because I don't use the product and I may not even know what it is.
You will generally have to reboot after uninstalling a system modification. Until you do that, the uninstallation may have no effect, or unpredictable effects.
5. If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
WARNING: Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software.
6. I recommend that you never reinstall the modifications marked with a dagger (†) above, if any. If your problem is resolved after uninstalling all the above modifications and rebooting, but you still want to use some of those not marked with a dagger, you can experiment with putting them back, one at a time, testing carefully after each step. Keep in mind that system modifications may be incompatible with each other or with future OS X updates, so it may not be clear which one is at fault.
7. If you still have problems after making the suggested changes and rebooting, post again. Remember: if you don’t like the results of this procedure, you can undo it by restoring from the last backup you made before you started.
Launch the Font Book application and validate all fonts. You must select the fonts in order to validate them. See the built-in help and this support article for instructions. If Font Book finds any issues, resolve them.
From the application's menu bar, select
File ▹ Restore Standard Fonts...
You'll be prompted to confirm, and then to enter your administrator login password.
Boot in safe mode to rebuild the font caches. Boot again as usual and test.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. In that case, ask for instructions.
Also note that if you deactivate or remove any built-in fonts, for instance by using a third-party font manager, the system may become unstable.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2>&-
This time you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

My itunes opens after 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to 12.x ....my operating system win7;processor i5 intel haswell and 4gb ram...i hav no issue

My itunes opens 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
but my problem doesnot get solved even after trying all the methods in the above pages...
now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible

My itunes opens 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
but my problem doesnot get solved even after trying all the methods in the above pages...
now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible

IPod freezes after updating to software version 1.2!!!

iPod freezes after updating to software version 1.2!!! After installing version 1.2 the "do not disconnect" screen took forever to disappear, so i just removed the cables and it still remained
like that, i restarted it manually, but now it's getting stuck when the apple logo appears...i reset it and when i finnally turns on, and i'm at the language tab, it freezes. can anyone help.!?

Apple just released firmware 1.2.1 for the ipod, you should try restoring your iPod again with that.

Wifi on iPad freeZing after update

wwifi keeps freezing after update.

Hey F.hodgkiss,
Thanks for the question. The following resource outlines the basic troubleshooting steps for Wi-Fi connectivity. I have also included the steps related to the symptoms you may be experiencing:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware. For AirPort Base Stations, install updates using the AirPort Utility.
Unable to access the Internet while connected to Wi-Fi
If you're using a public or commercial network, you may need to log in or subscribe.
Check to see if you have a self-assigned IP address:
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected and tap ( i ) .
If your IP address is 169.254.xxx.xxx, you may not be able to access the Internet.
If you do not have a self-assigned IP address, see if other Wi-Fi devices on your network have Internet access.
If they do not, consult with your network administrator or ISP for further assistance.
If they do, reset network settings on your device by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
Thanks,
Matt M.

Macbook pro keeps freezing after updating to Maverick

my 1 year old macbook pro keeps freezing after i updated from mountain lion to maverick.
all the time i had mountain lion i can remember maybe once where my mac froze. now, it froze probably 5 times in the last 5 days.
how can i fix this, or better still - how can i revert back to mountain lion? no, i never used time machine and i have 90gb left on my disc.
annoying.

See ds store's user tip -> https://discussions.apple.com/docs/DOC-6162.
Good luck,
Clinton

Iphone freezing after updating to 5.1.1

I have some troubles with my Iphone 4. Factory Unlocked. I just updated my phone to 5.1.1 and it started to freez. I can`t use it. Because when i press home it just freeze and i have to restart it by Home+Power. But it doesn`t help because after restart it freezing again. I tried to restore-no result. All this problem started after updating.. Please help me.. Because now i can`t it turn on.. After last freezing it turned off by itself. Any idea? I don`t want to belive that my phone "dead"

I want to make some remarks:
Decided to make dumping of cellular data of a network. phone restarted and that`s all... Light-emitting diode illumination at the screen burns, but the screen is black. Home+Power doesn't help, held and 15 seconds and 2 and 5 minutes. I tried to connect to a computer by USB and result -Connected Device it is not identified. And of course itunes doesn`t find it...
Help pleeeeease

Video Freezes after Update to 1.1

Video freezes after 20 seconds of play and then resumes with no audio after upgrading to 1.1.
From what I've read, this seems to be a problem when video has been converted using a third party software. It seems at this point, the only way to remedy the situation is to downgrade to 1.0. Here's how to do it without having to restore your ipod:
http://www.digg.com/apple/Howto_downgrade_to_older(iPod)firmware_WITHOUTrestoring
Just as a note, I called applecare and my technician was clueless about the problem. She was telling me to send it in, but I'm fairly certain that this isn't a hardware problem, just a problem with the upgrade, as people on many other forums are reporting it. In that case, you probably won't get much help calling customer service just yet. Hopefully they'll put a fix out for it soon.
sony vaio Windows XP

Hi,
I had the same problem and downgraded to the lower version. now the video works without any problem, but there seems to be another problem. when I want to eject the ipod from itunes, I get a message, that the iPod cannot be ejected because data on the iPod is currently used by an external program...
any idea...?
Windows XP
UPDATE: AFTER RESTARTING THE PC IT WORKED WITHOUT PROBLEMS!

Applications keep freezing after updates are installed...

My MacBook (Santa Rosa model) cannot seem to run any applications with out having them freeze every few clicks. It happened after updating from 10.5 to 10.5.6, with quite a few other updates installed at the same time as well. This happens to pretty much every application I run. What should I do?

Try downloading the Mac OS X 10.5.6 combo updater and install it.

Setting Passcode - Freezing after update

Has anyone had any issues setting their passcode after update? Mine lets me put it in, but on the last digit it freezes and then after a minute, returns to the homescreen as if nothing happened?????? Help???? Not had any other issues other than settings not really wanting to come up and being a bit slow.

Yes, mine did exactly the same thing. iPhone 3GS 32GB updated to 4.0. Sometimes it freezes as soon as I enter the passcode setting screen, usually it lets me get through both screens before freezing on the last digit. Setting the autolock delay sometimes freezes on me, too. I have done a Restore to Factory Settings, and then reloaded my media. The only change that made was that I was a couple of hours older; the problem remained. I have reset the iPhone, and forced a shutdown and reboot. No difference at all. Very unhappy right now.

Why is my iPad freezing after updates

why is my iPad freezing after updates

iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

IPod freezing after update to 1.2, downgrade to 1.1.2 fixes it

I like many others was suffering with a dead ipod after update to 1.2, after many frustrating hours of resetting, restoring and reformatting, I decided to reformat the iPod and reinstall version 1.1.2 which can be downloaded from the downloads section. Following this my iPod is working fine.
Hurrah.

How did you reformat your iPod? I have been trying to do this, but after I attempt to sync my ipod and I press the restore button, it only tells me that
an unknown error doesn't let me restore it.
I thought that iTunes 7.01 would do the trick, but nothing happened.

Constant freezing after upgrade to 10.6!!

Like the title says ever since I've upgraded to Snow Leopard I've been met with constant freezing on the internet or itunes and on one occassion the system. What do I do? My system overall is a bit slower too.
Model Name: MacBook
Model Identifier: MacBook5,2
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Memory: 4 GB

Thanks for your help.
I discovered that there was an issue with the virtual host config files. I am not sure why but the problem passed the Apache startup routine. I discovered the offending VH config file by turning them all off and reactivating them one at a time. The real head scratcher is why I couldn't scan or ping port 80 during the problem.

S4 Constant Rebooting after update

Issue is affecting four of my devices. Two of the devices are having this issue with only factory apps and blank sd card, these device came directly from VZ with no accounts installed before and after update.
Restarting is random. Not linked to power save, sleep, calls, apps, or anything else I can test.
Devices are unusable. Please offer a roll back.
Devices have been factory reset, cache cleared, and operated in safe mode. The issue persist across all.

Read post 54 in this thread here... Re: Galaxy S4 randomly rebooting after VRUFNG6 update!
In a nutshell, re-enable any disabled apps you have on your phone and power off and back on. You can then disable the apps if you would like.
This is a temporary workaround. Verizon and Samsung are working on an update (supposedly) which will not be out for a while.

Macbook Boot Freeze after update 10.6.8

I have a macbook pro A1226 Late 2007 running OSX 10.6.4 it runs this just fine however when i update to 10.6.8 or install lion it will not boot up. Just a grey screen spinwheel then freeze with different colors. It works fine when i plug in external monitor. I just dont understand how it works perfectly fine on 10.6.4 but will not update. Any thoughts?

Try this:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Download and install Mac OS X 10.6.8 Update Combo v1.1. Now use Software Update to get all other updates for Snow Leopard.

Constant freezing after updating to 35.0

Similar Messages

Maybe you are looking for