Constraint Problem in Foreign key --- Very Urgent - Help Needed

Hello All,
There are 2 tables and their associated fields
EmpProj
Emp_id(pk)
Proj_id (pk)
eff_from_dt(pk)
ProjDesc
Proj_id(fk)
eff_from_dt(fk)
Proj_name
I have created the 2 tables like shown below
CREATE TABLE EMPPROJ
(EMP_ID NUMBER,
PROJ_ID NUMBER,
eff_from_dte date,
PRIMARY KEY(EMP_ID,PROJ_ID,EFF_FROM_DT)
CREATE TABLE PROJDESC
(PROJ_ID NUMBER,
PROJ_NAME VRACHAR2(20),
EFF_FROM_DT DATE,
CONSTRAINT S2 FOREIGN KEY(PROJ_ID,EFF_FROM_DT) REFERENCES EMPPROJ(PROJ_ID,EFF_FROM_DT));
Now whenever i try to create a foriegn key table it gives an error message like "No matching parent key found."
The columns in the foreign key should be same in number, same datatype and size. you can't create a foreign key with one column for a primary key of two columns.
What i need to do to refer only the two columns in the Primary Key by a Foreign key?
Please suggest anyway to resolve this problem.
Thanks in advance.
Captain

My question is
The foreign key can not refer only partial column of primary key as the rule of RDMS.
How should i achieve that by other alternatives?
Please suggest any method.
Thanks in advance.

Similar Messages

Problem uninstalling MaxMSPRuntime on mac - urgent help needed

Hello there,
I've been using Cycle 74's MaxMSP Runtime version 5.1 for a while but recently had to witch to an earlier version to make some hardware function along side the Max runtime environment. The problem is that where i would usually just drag and drop Max 5.1 into the trash to uninstall it, for some reason, after i have done this and try to install the older version of Max, OSX wont let me install Max 4.0.8 as it says an updated version is currently installed. I have scoured my hard drive for the remanence of Max 5.1. and deleted everything i've found. Is there a way of overriding macosx and getting it to replace Max5.1 with an older version?
Urgent help needed as i am playing a show this weekend and currently am not able to get my equipment to function.
A shiny nickel for the one who saves my ***.
Thanks
Henry

Hi- Try this...
If you can, reinstall or use time machine to recover your recently deleted MaxMSP Runtime 5.1.
Then, download AppZapper. It is a utility that helps you cleanly delete programs off your mac. It is free for the first 5 uses.
http://appzapper.com/
Then, install AppZapper, and then go ahead and drag the MaxMSP Runtime 5.1 into it, and it should hopefully get rid of the pesky program

Very urgent help needed in activating a function module

Hello experts.
I had a standard report and i copied into an z report. i need to change some field output , and that field is there in a standard function module.so i copied that fun module into z fun module and stored in a new fun group. Now it is showing the error in the z fun module. include in the fun module is giving the error stating that it is not existing. please help me in coping the standard fun module correctly . please its very urgent.

Hi,
You should not copy a Function module alone, as it will have some dependant INLCUDES and global data in TOP include of the function group.
SO if you want the function module copy the entire Function Group into Z function group.
Regards,
Sesh

Very Urgent Help needed - Arabic support in Forms6i& reports6i

Hi,
Its a very very very urgent requirement.
How to Provide the arabic support in forms .
I am working on Windows Xp operating system.
1. How to Configure the Windows XP Operating system to provide arabic support?
In Design time i want to use English and during runtime i should be able to toggle beteen English and Arabic for Entering the data.Arabic data should be captured in seperate fields.
1. How to configure the oracle 8i/9i databases to provide both arabic(Saudi Arabia) and english? what characterset i need to
choose for saudi arabic?
2.How to install forms & Reports with arabic support?
3.How to dispaly the data in both english and arabic in forms and reports during runtime?
I will be really greatful if u are able to provide me that help and my advanced thanks to ur help.This very
very urgent.
Regds,
B.Prasad
[email protected]

Badma,
1. How to Configure the Windows XP Operating system to
provide arabic support?Please go to "Regional and Language Options" from the Control Panel. In the "Standards and formats" group of the "Regional Opitons" tab, select "Arabic (Saudi Arabia)". In the "Language for non-Unicode programs" group of the "Advanced" tab, select "Arabic (Saudi Arabia)", then restart Windows. If "Arabic (Saudi Arabia)" is not listed, then please go to the "Langauges" tab and make sure the "Install files for complex script and right-to-left languages (including Thai)" in the "Supplemental language support" group is checked.
1. How to configure the oracle 8i/9i databases to provide
both arabic and english? what characterset i need to
choose for saudi arabic?If you're not planning to support other languages than Arabic and English (7-bit), AR8MSWIN1256 should work for you. If you're planning to support other languages in the future, I would recommend you to create your database in UTF8 (Forms/Reports 6i doesn't work with AL32UTF8 database). Please note Arabic characters are represented in 2 bytes in UTF8 while they are 1 byte in AR8MSWIN1256.
2.How to install forms & Reports with arabic support?If you need Arabic translation, then please select Arabic when you're asked the language(s) to install. Otherwise, notmal Forms/Reports installation should work for you.
3.How to dispaly the data in both english and arabic in
forms and reports?Set your NLS_LANG to ARABIC_SAUDI ARABIA.AR8MSWIN1256.
Hope this helps.
Regards,
- Makoto

Very urgent help needed- Error while passing XML document to Oracle stored

Hi !
I have been struggling a lot to call Oracle 9i stored procedure passing Stringbuilder object type from ASP.NET
I am using Visual Studio 2008 Professional, OS: Windows XP and Oracle: 9.2.0.1.0
Following is the procedure:
CREATE or REPLACE PROCEDURE loadCompanyInfo (clobxml IN clob) IS
-- Declare a CLOB variable
ciXML clob;
BEGIN
-- Store the Purchase Order XML in the CLOB variable
ciXML := clobxml;
-- Insert the Purchase Order XML into an XMLType column
INSERT INTO companyinfotbl (companyinfo) VALUES (XMLTYPE(ciXML));
commit;
--Handle the exceptions
EXCEPTION
WHEN OTHERS THEN
raise_application_error(-20101, 'Exception occurred in loadCompanyInfo procedure :'||SQLERRM);
END loadCompanyInfo ;
And following is the ASP.net code:
StringBuilder b = new StringBuilder();
b.Append("<?xml version=\"1.0\" encoding=\"utf-8\" ?>");
b.Append("<item>");
b.Append("<price>500</price>");
b.Append("<description>some item</description>");
b.Append("<quantity>5</quantity>");
b.Append("</item>");
//Here you'll have the Xml as a string
string myXmlString1 = b.ToString();
//string result;
using (OracleConnection objConn = new OracleConnection("Data Source=testdb; User ID=testuser; Password=pwd1"))
OracleCommand objCmd = new OracleCommand();
objCmd.Connection = objConn;
objCmd.CommandText = "loadCompanyInfo";
objCmd.CommandType = CommandType.StoredProcedure;
//OracleParameter pmyXmlString1 = new OracleParameter("pmyXmlString1", new OracleString(myXmlString1));
objCmd.Parameters.Add("myXmlString1", OracleType.clob);
objCmd.Parameters.Add(myXmlString1).Direction = ParameterDirection.Input;
//objCmd.Parameters.Add("result", OracleType.VarChar).Direction = ParameterDirection.Output;
try
objConn.Open();
objCmd.ExecuteNonQuery();
catch (Exception ex)
Label1.Text = "Exception: {0}" + ex.ToString();
objConn.Close();
When I am trying to execute it, I am getting the following error:
Exception: {0}System.Data.OracleClient.OracleException: ORA-06550: line 1, column 7: PLS-00306: wrong number or types of arguments in call to 'LOADCOMPANYINFO' ORA-06550: line 1, column 7: PL/SQL: Statement ignored at System.Data.OracleClient.OracleConnection.CheckError(OciErrorHandle errorHandle, Int32 rc) at System.Data.OracleClient.OracleCommand.Execute(OciStatementHandle statementHandle, CommandBehavior behavior, Boolean needRowid, OciRowidDescriptor& rowidDescriptor, ArrayList& resultParameterOrdinals) at System.Data.OracleClient.OracleCommand.ExecuteNonQueryInternal(Boolean needRowid, OciRowidDescriptor& rowidDescriptor) at System.Data.OracleClient.OracleCommand.ExecuteNonQuery() at Default.Button1Click(Object sender, EventArgs e)
I understand from this that the .net type is not the correct one, but I am not sure how to correct it. I could not find any proper example in any documentation that I came across. Most of the examples give information on how to read but not how to insert XML into Oracle table by calling Stored Procedure.
Can you please help me to solve this problem? I hope that you can help solve this.
Also, can you please give me an example of passing XML document XMLdocument to Oracle Stored procedure.
In both the cases, if you can provide the working code then it would be of great help.
Thanks,

Hi ,
Additional to the Above error details my BPEL code looks like this:
<process name="BPELProcess1"
targetNamespace="http://xmlns.oracle.com/Application10/Project10/BPELProcess1"
xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:client="http://xmlns.oracle.com/Application10/Project10/BPELProcess1"
xmlns:ora="http://schemas.oracle.com/xpath/extension"
xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/">
<partnerLinks>
<partnerLink name="bpelprocess1_client" partnerLinkType="client:BPELProcess1" myRole="BPELProcess1Provider" partnerRole="BPELProcess1Requester"/>
</partnerLinks>
<variables>
<variable name="inputVariable" messageType="client:BPELProcess1RequestMessage"/>
<variable name="outputVariable" messageType="client:BPELProcess1ResponseMessage"/>
</variables>
<sequence name="main">
<receive name="receiveInput" partnerLink="bpelprocess1_client" portType="client:BPELProcess1" operation="process" variable="inputVariable" createInstance="yes"/>
<invoke name="callbackClient" partnerLink="bpelprocess1_client" portType="client:BPELProcess1Callback" operation="processResponse" inputVariable="outputVariable"/>
</sequence>
</process>
Kindly help if anyone has faced this Issue before.
Regards,
Rakshitha

Problems with tomcat-3.3 (urgent help needed)

Hello!
I am using servlets with tomcat3.3. I'm using JDBC to gain access to an ODBC MS-Access db. My problem is that at the client site a SocketException is generated which says 'socket write error-connection reset by peer" or 'socket write error (error code =10053) . My observation(belief) is that this happens only when user press refresh(F5) of the browser before the first request gets processed. At that time error is ignored but the server gets sort of hanged in a couple of hours. The error does not get caught when entire code inside doGet() is put inside a try-catch block. PLease please help.
Thanks in advance.

gain access to an ODBC MS-Access db. My problem is
that at the client site a SocketException is generated
which says 'socket write error-connection reset by
peer" or 'socket write error (error code =10053) . MyThis will always occur in a web server when the client disconnects before receiving the whole response. In a normal web server you will see this often on pages that are slow. It also happens when users double-click on buttons or links, since two requests get sent to the server.
observation(belief) is that this happens only when
user press refresh(F5) of the browser before the first
request gets processed. At that time error is ignored
but the server gets sort of hanged in a couple ofWhat do you mean the server is hanged ? Does it stop responding to requests ?
hours. The error does not get caught when entire code
inside doGet() is put inside a try-catch block. PLease
please help.The server doesn't pass these sorts of errors to your servlet because Tomcat does all the mult-threading and connection cleanup itself.

Very very urgent help needed Distributed environment.

Hi All,
I want to know more about distributed environment. Typically we do have only one PRODUCTION system like 100.all the day to day business activities in real time will be done in this system. where the question will arise transfering the data from one system to other system using ALE/EDI-IDOCS.
for suppose::::
data between sales organization to warhouse and manufacturing unit to warehouse.
and all invoices will goes to respective company code in FI. then all should be done under the one roof (client). that client is here 100 as PRODUCTION system,as per my knowledge.
i am expecting clear understanding of this scenario from you guys.
like my questions???
1) what is the system?
ANS: warehouse, sales organization,manufacturing unit these all are systems.where we can define in one PRODUCTION system and one client. and these RFC destinations we create like three digit or thru IP address.
2) i want to know about this three digit sytem? whether it will create it within the production system (100)?
3) if it is created within the production client(100) system then what the need of IP address?
4) what is client?
ANS: client is highest hierarchy in the sap system.in production we maintain 100 as a one. but in development systems and other quality systems we maintain like 100,200,300,400,500,,,Etc.according to business requirement.
*********(Please dont say answers like dev syst to quality systems)***********
my thoughts and views i added, i wnat to know clear scenario, within two lines.if it possible?
earliest answer is more appreciable.
warm regards,
lynx.

Hi
1. Client : A group of users who can Access some portion of data in SAP system Database.
SAP introduced the Client Concept to allow different category of users (Such as Developers , Testers, End users) in the Same SAP BOX (server).
that is why Tables in SAP Database are categorized as Cross-client (shared) and Client-specific.
So a production server can have one or more clients or all users may be on Same client.
2. Distributed processing : Check this Scenario .. that will help..
Customer has a separate SAP Warehouse Management System (WMS) in the R/3 landscape where all R/3 Distribution data are replicated/distributed from R/3 to the WMS system via ALE. For example, Sales Orders are created in R/3 - when they are delivered (Sales document->Deliver) the ALE kicks in and the same Delivery doc is distributed to the WMS system but the Sales order is not distributed. Any subsequent functions for the Delivery like Picking, Packing, Goods Issue, Shipment is then done from the WMS system only so that all distribution specific transactional data are stored and processed from the WMS system.
Again, in order to successfully distribute the delivery documents to the WMS system from R/3 via ALE, a lot of SD master data needs to be distributed prior to these subsequent distribution business processes (like picking, packing, GI etc.). So another set of ALEs are also set up to distribute SD master data via IDocs (within the ALE framework) to the WMS system every time master data is created/changed in the R/3 - for example - Plant, Warehouse, Storage Type, Storage Location, Material Master etc.
For distribution of materials from R/3 to WMS, we use Basic Type/IDoc Type MATMAS05, Message Type MATMAS. We've set up MATMAS05 using ALE Filters on Division, Sales Org., Distribution Channel, Material Type, Storage Location and Plant as we want only specific org data to distribute across WMS.
Reward if helpful.

Very very urgent help needed

When I have break groups in my report all of sudden the generate to file option stopped working in report 6i.
Please anyone who has faced this problem throw some light on this.
aruna

correnction ---
it is not working when integrated into forms. ie I am calling this report from a forms menu and then it does not work.
<BLOCKQUOTE>quote:<HR>Originally posted by aruna1000:
When I have break groups in my report all of sudden the generate to file option stopped working in report 6i.
Please anyone who has faced this problem throw some light on this.
aruna<HR></BLOCKQUOTE>
null

Very urgent help needed

can any tell me : in ALV list, when i double click on the order number, its get hyper linked to va03 and in the same list, when i double click on sold to /ship to (kunnr), it is hyperlinked to vd03.
please write the code for the same. I'm using the Reuse_alv_grid_display FM.
thanks,
shamim

Hi Shamim,
please refer this code.
FORM USERCOMMAND USING PUCOM LIKE SY-UCOMM SELFIELD TYPE SLIS_SELFIELD.
CASE PUCOM.
WHEN '&IC1'. "IC1 is fcode for double click
IF SELFIELD-FIELDNAME = 'VBELN'.
SET PARAMETER ID 'AUN' FIELD SELFIELD-VALUE.
CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
*here input value to va03 will the value on which u will double click
ELSEIF SELFIELD-FIELDNAME = 'KUNNR'."
SET PARAMETER ID 'KUN' FIELD SELFIELD-VALUE.
CALL TRANSACTION 'VD03' AND SKIP FIRST SCREENENDIF.
ENDCASE.
*here input value to vd03 will the value on which u will double click
ENDFORM.
Reward points if helpful.
Regards,
Hemant

MOVED: Sudden problem with MSI K8N DIAMOND - urgent help needed

This topic has been moved to AMD64 nVidia Based board.
https://forum-en.msi.com/index.php?topic=93490.0

Quote from: Tricky78 on 10-February-06, 07:00:58
lDaGGerl my friend , it worked !!! i don't know why but i did what u are saying and the PC booted normally !!! i didn't left the battery for a whole day but for 3 hours and it worked ...
anyway , after arriving at the welcome screen of Windows (it was such a sweet image !!) , the same thing happened.The pc froze and after restarting then it doesn't post again ... the proccessor is ok , the mobo was showing bios version 1.8 , so i guess it is an issue with the RAM ... I will run a test with different ram and let u know ...
Billy
It should be related with your Maxtor SATA-II HDDs. You might connect them to SATA1/2/3/4,which are controlled by nForce4 chip. So first set them as SATA-I mode and update their firmware. You need to contact Maxtor Technical Support and get the latest firmware. Check Maxtor's knowledge and you can find the correpsonding information.Also you can also find the related in this forum such as the following thread.
https://forum-en.msi.com/index.php?topic=93492.0

EMIGALL : problem of foreign key

Hi everybody
I m working on a EMIGALL migration and i met one problem with foreign key
My field VKONT is defined (in specific table ZR006SAT) like a foreign key with check table FKKVK (Contract Account Header). It means that an entry can be inserted in ZR006SAT , only if VKONT value exists in FKKVK table.
But, during the migration of my migration object ZR006SAT (same name as the table), I have no error when I put any value for my VKONT field in the input file. EMIGALL does not control the foreign key constraint and I dont understand why (???).
However,
1. when i try to insert manually (by SE11) an entry in ZR006SAT, SAP forces me to input correct value (existing in FKKVK table) for VKONT field.
2. for standards migration objects, there is no problem foreign key check is working well
3 days I ve been on this problem.
Please help me

Hai
You can find detailed documentation of EMIGALL in SAP itself. Use Transaction EQ81 to display it. It provides all the concepts and procedures to work with EMIGALL. I will also prepare a document and send it to u later. Meanwhile just for ur info here are some points about EMIGALL :
1. It Migrates data Business Object wise
2. It uses Direct Input Technique
3. It has more than 100 objects of IS-U
and the steps for implementation goes like this:
1)You have to create a user specially for migration which will have all the authorizations related to migration workbench, BASIS and IS-U
2)You have to create your own company in EMIGALL. There is a default company called SAP.
3)Company SAP contains all the Business Objects
4)You have to figure out what business objects u need and then u have to copy those business objects to ur company from Standard Company SAP
5)Each objects contains more than one structure and each structure can contain more than one fields. The relation goes like this
Object ---> Structure ---> Field
6)You have to define field rules for each required field of the object. You have to mark "Not required" for fields u don't need
7)After field rules for a given object is set u have to generate load report i.e. actual Direct Input Program which will migrate data. This program is generated on basis of field rules set by u.
8)After the load report is generated u have to prepare an input file (import File) for migration. The import file should be according to structure provided by SAP and must be in binary format. SAP Provides the structure of file according to your configurations. You have to write ur own Data conversion program(in any language) for this task.
9)You take import file as input and migrate the data using generated load program
10)Finally u can check the Migration Statistics and Error Log
Regards
Sreeni

URGENT HELP NEEDED ... Tomcat Realm and JRE1.4 plug-in problem

I have tried the Security Realm of Tomcat. Since I do not have
an LDAP server, I decided to use the Tomcat-users.xml file in
Tomcat\conf directory.
I added the following lines of code in the web.xml file.
<security-constraint>
<web-resource-collection>
<web-resource-name>Entire Application</web-resource-name>
<url-pattern>/*</url-pattern>
</web-resource-collection>
<auth-constraint>

<role-name>webviewer</role-name>
</auth-constraint>
</security-constraint>
<login-config>
<auth-method>BASIC</auth-method>
<realm-name>Tomcat Manager Application</realm-name>
</login-config>
The <role-name> "webviewer" is added into "Tomcat-Users.xml" as the following:
<tomcat-users>
<user name="test" password="password" roles="webviewer" />
</tomcat-users>
So, now when we type the url: http://localhost:8080/adbpdbre/default.htm, TOMCAT shows a dialog box asking for UserName: and Password:Now, only when we give the username and password, it shows the page. This is exactly what we want.
But the problem now is, this default.htm page, has 5 links to 5 applets. The first time that I click on one of these links, the JRE plug of 1.4 shows a dialog again asking for the username and password. Till I dont provide the username and password the system doesnt go ahead and applet doesnt load. I do not want the JRE to ask me for the username/passwords again..How to avoid this ?
Can you give me some more information on this. Ultimately in the production usage, we will be using LDAP and not Tomcat's memory realm.
URGENT HELP NEEDED ... I need to get back to my client on this.
Help would be v. much appreciated.

In the config file, you 're essentially saying that you want Tomcat to prompt for usr/passw on every request (url-pattern = /*) made by a 'webviewer', and that's exactly what Tomcat is doing.
Consider using specific url-patterns & roles for resources to be protected. If for now, all you need is to protect the first page, use a more specific url-pattern.
Just an advice : if you'll be using LDAP in production, do not waste time with Tomcat's Security Realm and the BASIC authentication type, since the two have not much in common. Start reading doc on LDAP, and code a prototype, or even better, a vertical slice of the app (i.e a proof of concept).

Urgent help needed with un-removable junk mail that froze Mail!!

Urgent help needed with un-removable junk mail that froze Mail?
I had 7 junk mails come in this morning, 5 went straight to junk and 2 more I junked.
When I clicked on the Junk folder to empty it, it froze Mail and I can't click on anything, I had to force quit Mail and re-open it. When it re-opens the Junk folder is selected and it is froze, I can't do anything.
I repaired permissions, it did nothing.
I re-booted my computer, on opening Mail the In folder was selected, when I selected Junk, again, it locks up Mail and I can't select them to delete them?
Anyone know how I can delete these Junk mails from my Junk folder without having to open Mail to do it as it would appear this will be the only solution to the problem.

Hi Nigel
If you hold the Shift key when opening the mail app, it will start up without any folders selected & no emails showing. Hopefully this will enable you to start Mail ok.
Then from the Mail menus - choose Mailbox-Erase Junk Mail . The problem mail should now be in the trash. If there's nothing you want to retain from the Trash, you should now choose Mailbox- Erase Deleted Messages....
If you need to double-check the Trash for anything you might want to retain, then view the Trash folder first, before using Erase Junk Mail & move anything you wish to keep to another folder.
The shift key starts Mail in a sort of Safe mode.

URGENT HELP NEEDED - iPhone 3Gs no longer detected or charged by MacBook

My iPhone 3Gs (3.1) has been running fine, until several hours ago today, when I plugged it to my MacBook, the iPhone is no longer detected - it doesn't show up in iTunes, nor it is charged. I tried opening iPhoto, and it wasn't there too. Not with Image Capture too. I tried charging it using the out-of-box wall charger using the same out-of-box USB cable I use for MacBook, and it can be charged without any problem. Then I put it into Recovery mode, and there iTunes can see it. I don't want to restore it before I figure out exactly what went wrong, as I don't want the restore process somehow gets stuck in the middle that the connection is lost again.
I've tried reinstalled iTunes, including completely removal of Apple Mobile Device Support, as instructed by Apple. But still no luck.
I've tried switching to another USB port of my MacBook. No luck.
My iTunes is the latest 9.0.1, and my Mac OSX is 10.6.1. My iPhone is on 3.1, upgraded from 3.0.
I've read from web that it seems I'm not the only one out there having this problem. But none of them seem having any real working solution.
Urgent help needed & appreciated. Millions of thanks in advance.
Gary

1. I used both cables - theirs & mine ... and on several macs
2. yes, same cable for wall & mac
3. as said, i did completely remove & install itunes (incl. apple mobile device support), as instructed on the apple webpage
anyway, did a restore just now. it seems okay now. but the problem is i have no idea what cause this, and i can't replicate the problem. so i don't know when it will happen again ... maybe a bug with os 3.1 ... others on web said os 3.1 is quite buggy ...

IPhone 3G 8GB Crashes when syncing with iTunes. URGENT HELP NEEDED.

I have latest iTunes and OS on my iPhone 3G...
Every time i plug my iPhone in it begins to sync and then iTunes will freeze and not respond..
I have tried re installing iTunes.. I can't reset my iPhone as i can't create a backup..
URGENT HELP NEEDED PLEASE!

I don't have an iphone, but if it's anything like my click-wheel ipod, a reset doesn't delete anything.
It just resets the ipod's operating system, kind of like a PC restart. Did you try this Sleep/Wake button thing mentioned here?
http://support.apple.com/kb/HT1737
Maybe it's a podcast of voice memo causing the problem like it did for this person
http://discussions.apple.com/message.jspa?messageID=10907809#10907809
That's all I got. You might have better luck on an iPhone forum. Everyone there would probably have one. Like I said, I don't.

Constraint Problem in Foreign key --- Very Urgent - Help Needed

Similar Messages

Maybe you are looking for