Consumption data in the material master

Dear All,
Can anyone explain me about consumption data in the material master?
1. How the consumption datau2019s are automatically updated in the material master?
2. List of movement types, that creates consumption data in the material master
Thanks in advance
Regards,
Krishna samy

Krishna Samy wrote:
Dear All,
>
>
> Can anyone explain me about consumption data in the material master?
>
>
> 1. How the consumption datau2019s are automatically updated in the material master?
>
> 2. List of movement types, that creates consumption data in the material master
>
>
> Thanks in advance
>
>
> Regards,
>
> Krishna samy
Hi,
When a PO is created (say for Cost Center(s)), and if the material has a Material Master record, after the goods are received the same goes directly into Consumption account and not in stock account since it is meant for direct consumption by Cost Center(s). (Ex`s. of consumables are Office supplies).
Please go thru this document to understand how automatic postings works: [CLICK HERE|http://help.sap.com/saphelp_46c/helpdata/en/12/1a39516e36d1118b3f0060b03ca329/content.htm]
Reetesh
Edited by: Reetesh on Nov 27, 2011 7:47 PM

Similar Messages

Automatic creation of Warehouse No. data in the material master

Hi all,
I want the automatic creation of Warehouse No. data in the material master record at the time of the first goods receipt is allowed.
Similar to the way where we can do the same for Storage Location by clicking on Create SLoc. automatically in the plant parameters settings.
can it be done..plz guide.
Regards,
Sandeep

Hi Deepak ,
Such facility is not available for Warehouse .
Regards
Ramesh Ch

Palletization Data in the material master

Hi,
If I defined the palletization data in the warehouse management view of material master as follows:
LE qty: 2
Unit : PC
SU type: IP
the system should separate the transfer orders into several items by LE quantity when put away, for example, If I put away 10 pcs, the system should separate the transfer order into 5 items, each item have 2 pcs, is it right?
Kindly please advise.
Thanks.

http://help.sap.com/saphelp_47x200/helpdata/en/c6/f83fb14afa11d182b90000e829fbfe/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/c6/f83fb14afa11d182b90000e829fbfe/frameset.htm
Regards,
Ashok

Load Material Data in the Material Master

Hi All,
We have the Material Ledger Active at the Material Level. We are using ECC 6.0 with the highest enhancement pack.
   The requirement is to load the Moving average prices for the Company code currency and Group Currency as a part of
   Material Master Data Migration.
   I am using a the business object BUS1001006's SAVEDATA method (Basic type MATMAS_BAPI03) in a LSMW to achieve
   this.
   This IDOC does not provide me the structure or fields to load the Material Ledger Data. I tried passing the price to the
MBEW-VERPR however the price is not updated.
   One workaround is to use MR21 however that would be a seperate program which we want to avoid.
   Has anyone done this before. Will greatly appreciate any help/suggestions.
   Thank you for your time.
Regards,
Vamsee

Yes, I am loading from the text file.
My Zmaterial is defined as InfoObject with text data language dependent.
Now I want to load this master data through flat file.
I created FlatFile under source System and then created a DataSource. Under Extraction tab I selected the physical location of my flat file with csv separator and all. Then under proposal I saw preview of my data. Later under Fields tab, For Language I selected 0HTLANG
For Materialid I selected Zmaterial (defined by me)
But now there is one more field remaining MAterial Description, across that field what Template InfoObject should I put? Thats my confusion.
After this I can click on Preview and then load that data in PSA thru infopackage. then later into InfoObject.
Please inform.
thnx

How is the Consumption tab will update in the material master?

Hi Friends,
How is the Consumption tab will update in the material master?
what are the customization required if consumption tab wants update with respective the qty?
Regards,
Hari Shankar

Hi Friends ,
I am very thankful to u all for your quick response,
I have tested the two materials with two movement types of 601 and 954.
when i did the 601 movement type the consumption tab in the material master has updated automatically even though i haven't maintained forecasting tab, but where as for the movement type 954 the consumption tab is not updated even though i have maintained forecasting tab view in the material master.
Is the consumption view will update based on the Material movement types?
where is the control parameter for updating consumption tab?
could you pls help me regarding this?
Regards,
Hari Shankar.

Ignificance of the Industry Sector selection in the Material Master

hi all,
We need information on the significance of the Industry Sector selection in the Material Master field. I understand that it can influence field selection and the screen sequence of the material master record. We are particularly interested to know the influence of the industry sector u201CPharmaceutical Industryu201D .
Any inputs would be greatly appreciated.

Hi
Please check follwoing links
[MM01- Industry Sector;
[http://help.sap.com/saphelp_46c/helpdata/en/ff/515b3149d811d182b80000e829fbfe/content.htm]
1. Define Industry Sectors and Industry-Sector-Specific Field Selection (transaction OMS3) -> assign a field reference to field selection
2. Maintain Field Selection for Data Screens (transaction OMS9) -> define a specific field selection for a field selection group (for example, depending on industry sector (the field reference appears on the lower table control).
Like the material type, the industry sector also has a control function. When you create a material master record, the industry sector determines:
Which screens appear and in which order
Which industry-specific fields appear on each screen
The industry sector you assign to a material cannot subsequently be changed. In Customizing, you can define new industry sectors and maintain the field reference for field selection control according to your enterprise-specific requirements.
Most data in the material master record can be maintained directly by the user. But some information is automatically updated by the system. When you enter goods movements, for example, the system updates the stock and consumption data. Statistical information, such as the date of original creation and that of the last change, can be invoked with , with the quick-info text Information on material.
Some data in the material master is used for information purposes only, for example, description, size, and dimensions. Other material data has a controlling function in an application. For example, the MRP type controls the MRP procedure and the price control indicator determines which material valuation procedure is used
Regards
Kailas ugale

How to maintain the material master data in plant

Hi all,
while creating BOM I am getting an error "no material master data in plant' can some one help me how to maintain the material master data in plant
Regards,
Balu

Check the material available in MARC table in SE11 transaction against your plant.If it is not available please maintain through MM01 transaction.

How to Update the Basic Data text in Material Master.

Hi Abapers,
I have more than 5000 materials for update basic Data text inside Material Master.
how to update basic data text using abap programe? is there any bapi or normal program?.
anybody give me sample of this.
Thanks
S.Muthu.
IT Dept.

Hi
You can do by using the FM SAVE_TEXT.
Just populate text into table i_tline.
Local data declaration
DATA: l_wa_thead TYPE thead, " Header
        l_wa_tline TYPE tline. " Work area for tline
Populate header
l_wa_thead-tdobject = c_obj_material.
l_wa_thead-tdname   = wa_data-matnr.
l_wa_thead-tdid     = c_id_best.
l_wa_thead-tdspras = sy-langu.
l_wa_thead-tdluser = sy-uname.
l_wa_thead-tdfdate = sy-datum.
l_wa_thead-tdtxtlines = '1'.
IF i_tline[] IS NOT INITIAL.
   l_wa_tline-tdformat = c_slash.
   APPEND l_wa_tline TO i_tline.
ENDIF.
Text shd start from next line
l_wa_tline-tdformat = c_slash.
CONCATENATE c_text wa_data-text
INTO l_wa_tline-tdline SEPARATED BY space.
Append the new text to the int table
APPEND l_wa_tline TO i_tline and l_wa_thead
C* Local data declaration
DATA: l_wa_thead TYPE thead, " Header
        l_wa_tline TYPE tline. " Work area for tline
Populate header
l_wa_thead-tdobject = c_obj_material.
l_wa_thead-tdname   = wa_data-matnr.
l_wa_thead-tdid     = c_id_best.
l_wa_thead-tdspras = sy-langu.
l_wa_thead-tdluser = sy-uname.
l_wa_thead-tdfdate = sy-datum.
l_wa_thead-tdtxtlines = '1'.
IF i_tline[] IS NOT INITIAL.
   l_wa_tline-tdformat = c_slash.
   APPEND l_wa_tline TO i_tline.
ENDIF.
Text shd start from next line
l_wa_tline-tdformat = c_slash.
CONCATENATE c_text wa_data-text
INTO l_wa_tline-tdline SEPARATED BY space.
Append the new text to the int table
APPEND l_wa_tline TO i_tline.
CALL FUNCTION 'SAVE_TEXT'
    EXPORTING
      client          = sy-mandt
      header          = l_wa_thead
      savemode_direct = c_check
    TABLES
      lines           = i_tline
    EXCEPTIONS
      id              = 1
      language        = 2
      name            = 3
      object          = 4
      OTHERS          = 5.
IF sy-subrc = 0.
    COMMIT WORK.
endif.

Units from the additonal data tab of the material master

HI Gurus,
can anybody please tell me how we can pull the units from the units of measure tab of the additonal data data tab of the material master?
Thanks
Anusha

Hello,
Are you asking about the Table where you can see the entry for UOM in Material Master?
If this is your question then answer is It is MARA1 & MARM where you can see the UOM.
regards,
Prashant Rathore.

Error in uploading the material master data

HI friends,
I have trasferred the material master data through idocs from one server to another server(with in SAP only).
Outbound side the status of idoc is 3 which is OK.But inbound side ,the status is 51 and the error is 'Function module not allowed IDOC_INPUT_MATMAS01'.I debugged the function module in which the control records , data records are getting transferred correctly and also the segments data is also fine.But , i am not able to rectify the error.
Can anybody give the solut

Hi mahesh,
check the proces code may be having the FM module 'IDOC_INPUT_MATMAS01'. change with some other FM for processing the IDOC. you need check with different ways what is the problem. better dont stick on one thought.
~linganna

SAP standards for retriving the Material Master Data

Can someone provide me list of all SAP standards for retriving the Material Master Data with respect to views.
Standard Reports
Function Modules
RFC's
BAPI's.
T.codes
Sample code's
useful answers will surely be awarded.
Regards
Vinayak

Hi,
These are the standard BAPI's for Material master.
BAPI_MATERIAL_DELETE Flag Material for Deletion
BAPI_MATERIAL_DISPLAY Display Material
BAPI_MATERIAL_EDIT Change Material
BAPI_RETAILMATERIAL_CREATE Create Material
BAPI_RETAILMATERIAL_DELETE Discontinue Material
BAPI_STANDARDMATERIAL_CREATE Create/Extend Material
BAPI_MATERIAL_SAVEREPLICA BAPI for Mass Maintenance of Material Data
BAPI_MATERIAL_SAVEDATA Create and Change Material Master Data
BAPI_MATERIAL_EXISTENCECHECK Check Existence of Material
BAPI_MATERIAL_GETBATCHCERT Create Quality Certificate for Batch in Portable Document Format (PDF)
BAPI_MATERIAL_GETBATCHES Create Batch List for a Material
BAPI_MATERIAL_GETCHARMERCHHIER Supply Characteristics of Retail Material for Material Group Hierarchy
BAPI_MATERIAL_GETINTNUMBER Assign New Internal Numbers for a Material Type
BAPI_MATERIAL_GETINTNUMBERRET Assign New Internal Numbers for a Material Type for Retail Materials
BAPI_MATERIAL_GETLIST Supply List of Materials for Search Criteria Transferred
Thanks.,

Label Data view in the material master

Hi all,
I read this SAP help portal that said "The Label Data view in the material master allows you to display or edit label data that is specific to the material. "..
may I know where I can find this view in the material master?
Thanks
Karen

Dear Karen,
This "Label Data" is one View in Material Master.
While creating the Material using T.Code MM01, when you are on the Selection screen of Various views, it is Last Option.
i.e. Lable Data
If this view is not there while creating the Material. then it is MM Configuration.
That view is assinged to Material Type.
See in Material Master, Industry Sector and Material Types controls these Views. So with the help of MM Consultnat you
have to get that View Configured to your Material Type.
If you find my answer satisfactory, please grant me the points.
Regards,
Amol Joshi

Revoke the material master data's updated in production

Hi Experts,
I have updated the product hierarchy field for the list of materials using BAPI_MATERIAL_SAVEDATA.
I have forget to set the SALES_VIEW flag in BAPIMATHEAD table, instead it created all the views for the material. Is there any way to revoke the material master data.
Thanks & Regards,
Anand

ALL_CAPITAL should resolve your problem. Check this also:
RSDMD 194: 0MATERIAL Datarecord is invalid
/thread/307925 [original link is broken]
Absolutley Stuck...can't load data as characteristic
Thanks..
Shambhu

Open field for cost center on the material master

We have a unique requirement in a facility we intend to implement plant maintenance in to track a cost center to a material by including the cost center on the material master somewhere. Cost center is not a field on any of the material tabs we use for maintenance materials, but the requirement is just that it is tracked in a field, even if it's just an open field like a "user defined field" or another field not used often. We realize there are disadvantages such as the field not being checked against active cost centers, but we are looking at options short of adding cost center as a field manually to a tab (which I believe would require ABAP assistance). I don't think there are any other fields/tabs we are currently not utilizing but I could be wrong... The best option we can think of is adding it in a material characteristic so it shows on the classifications tab, but I thought I would see if anyone has any other ideas.
Thanks

Not sure what is the need of cost center on material master when you want to implement Plant maintenance module. Do you have any specific requirement for this?
Ideally cost center will be derived from either functional location/ equipment (equivalent of material master) on to PM work order or notification.
Can you elaborate the requirement?
After all if you wish to go with cost center, then I suggest it should be at plant level as PM requires plant level distribution. You can add up a custom field and give the reference of cost center data element with help of developer.

Error while creatting the Material Master IDOC in ERP 2005

Hello All,
I am trying to create scenario from RFID-Enabled Outbound Processing - Conf Guide (SAP AII 4.0).
I am using Auto ID 4.0 on a NW04s system. The backend is a ERP2005 system.
The scenario requires that I need to create a material in the backend and send it to the NW04s system using IDOCs.
After completing the configuration on the backend, I tried sending the Material Master IDOC to Auto ID from the transaction AIDMM. I get a message that IDOC is just being created. But I could not find it in the transaction WE02.
On debugging I found that the function MARD_GENERIC_READ_MATNR_PLANT resulted in error.
Thanks for any kind of input.
Regards,
Rahul
Message was edited by:
Rahul Gavande

Dear,
Check ABAPer for file settings.
- CANNOT_SKIP_ATTRIBUTE_RECORD : The attributes could not be read in the EPS parcel. The file cannot be opened for reading, because it may have been deleted in the meantime.
- CANNOT_DETERMINE_EPS_PARCEL : The EPS parcel is not in the EPS Inbox, because it may have been deleted. You must download the relevant patch again (for example, Hot Package).
- CANNOT_DETERMINE_DATA_FILES : The name of a data file could not be determined, because a profile parameter was not correctly configured. Check the settings using the report RSPARAM.
- CANNOT_DISASSEMBLE_R_DATA_FILE : An R3trans data file could not be unpacked. A possible error source is that the relevant EPS parcel was not found. The data file could not be opened for writing. An error occurred when transmitting a 20K block from the EPS Inbox to the directory /usr/sap/trans/data (UNIX).
- CANNOT_DISASSEMBLE_D_DATA_FILE : An ADO data file could not be unpacked. The reasons are the same as with the message CANNOT_DISASSEMBLE_R_DATA_FILE .
- CANNOT_CREATE_COFILE : The cofile could not be created from the relevant data file. One possible error source is that <sys>adm does not have write authorization for the directory /usr/sap/trans/cofiles (UNIX).
Check Note: 70752.
Regards,
Syed Hussain.

Consumption data in the material master

Similar Messages

Maybe you are looking for