Contact sheets with header for contact info?

I'm trying to print my first contact sheet (actually a jewel case insert), and I'm very surprised to see that there appears to be no way to include some type of header and/or footer that would include my contact info, copyright, etc.
Am I missing something in AP, or is there a work around for this? It seems useless to send out a contact sheet that doesn't include at least my name.
Thanks,
Andrew

Because you didn't look hard enough. Make sure you check "Photo Info" and the click on the popup next to it and select filename or setup a custom text in Edit..

Similar Messages

Problem with header for each column

Hi,
I want change column header-text dynamically in the table control of module pool programming.Please help me.

Hi Abhijit,
no need to put '&' in the variable .You just give the name of the variable as lw_text and also dont forget to expand the Def.Length attribute to equal to the length of that variable in the decalration.It is working for me.
put the follwoing code in PAI module.
Data:lw_text(15).
If cond1 = true.
lw_text = 'Description 1'.
elseif cond2 = true.
lw_text = 'Description 2'.
Endif.
Using the above code u can modify dynamically.

RV042G not comunicating with isp for ipv6 info...

I enabled dual stack on my rv042g router but its not recieving ipv6 information from my isp. My isp is Time Warner in Milwaukee. They assure me that they are ipv6 ready and assume the problem is on my end. They are useless for help though. All they want to do is have me connect one computer up to my modem. What good is that when I have a network that needs service. The router needs to be working not just one pc. My ipv4 is working perfectly. It is obtaining all information automaticly. Shouldn't ipv6 do the same?
Anyone else having this problem? Please dont advise me to reboot!

Anyone collecting a paycheck to answer these? I'm sorry but Cisco is a very large corporation. If this is the forum they prefer to help their customers then they should have engineers in here helping out with the ones that other customers aren't helping answer for them. There should be no posts in here without replies.
I bought a "Small" Business product from Cisco. I'm not large enough to have an IT staff. If Cisco intends to provide products to this niche then they might want to understand the customer a little. We don't mind doing a little hard work and some research. Just a nudge in the right direction or a link to a document that might help would be greatly appreciated.
Sincerely,
Mr. Small Business

Populate and header for an excel sheet in SALV

Hi,
I want to download an excel sheet with header in SALV.
Please let me know how to do that.
Thanks & Regards
Santhosh

Hi,
I’m not sure if I understand your question correctly, so please correct me if I have any misunderstandings.
For the defined names, I assume you mean the named range. If so, you can create the binding to the named range through
Bindings.addFromNamedItemAsync method.
For the styles, I think the article below may give you some help.
How to: Format tables in apps for Excel
By the way, there are no methods to iterate the styles and named range through the current Office JavaScript API.
If this is a feature you want to include in future versions of Office JavaScript API, please submit a feedback to
Office Development Platform User Voice.
Regards,
Jeffrey
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Is there a phone number to call Adobe. I go around an endless loop pressing their contact info tabs? Maybe someone at this sight can help. I am new to digital photo - I have been a B&W film photographer for many years. I have a problem with a Macbook Ai

Is there a phone number to call Adobe. I go around an endless loop pressing their contact info tabs? Maybe someone at this sight can help. I am new to digital photo - I have been a B&W film photographer for many years. I have a problem with a Macbook Air. It was working fine - I was using LR and a message came on the screen that said something like the memory was dangerously low. I stopped and tried to delete LR files. I couldn't do it. I closed the program and tried reopening and got the message that there is not enough memory available to open LR. I contacted Apple. They spent a half hour on the phone with me and eventually told me they didn't know how to help. The tech said that LR had gobbled up all the memory and said I should contact Adobe and ask where and how my photo files are stored and to delete them. I have several back-ups. Thanks - Arthur

This sort of error message only comes up for Lightroom when your hard disk is full. Indeed this has nothing to do with internal memory as that will be intelligently be dealt with. If you have a mac Book Air that is not so surprising as the cheapest versions come with very small hard disks and if you shoot raw with any recent camera, you'll fill up your hard disk very quickly and you can probably only store a few months of pictures if you are a typical photographer. So the bottom line is that you need to create some room on your hard disk. You should move some of your originals to an external hard disk. You can also delete some of your backup copies of your catalog file that Lightroom automatically generates every few days and that quickly gobble up hard disk space. So first figure out how full your hard disk is. To see that, go to the apple menu, hit -> About this Mac -> More info->Storage. You should see your internal hard disk on top and you'll find that it is almost entirely full with photos. Now find your Lightroom catalog file using Finder. It is usually in a folder in the Pictures folder in your home directory. You should see a Lightroom 5 Catalog.lrcat file, a previews file and a folder called backups. Inside the backups folder, you'll find a lot of subfolders. They have names that show the dates the backups were created. If you have backups of your entire hard disk, you can delete these backups when they are older than a few months. I usually only keep the last 4 around. Just drag the folders into the trash can on the dock on the bottom of your screen and empty the trash. This will probably free up enough space that Lightroom will already run again. Now start thinking about where you will want to store older images. If you have a good USB3 or Thunderbolt hard disk that is probably the best option. There is a video here by Adobe that has some instructions on how to do this: Is Your Hard Drive Full? Here’s How to Move Images to Another Drive in Lightroom. « Julieanne Kost's Blog If that doesn't work because you don't have enough hard drive space to run Lightroom yet, here is another set of instructions to move your files using the finder to the other hard disk: How do I move only my photos to another hard drive, leaving the catalog where it is? - The Lightroom Queen. If you follow that, as soon as you confirm all your images are on the new hard disk, you can delete them from your internal one. She is not so clear about that part but if you don't delete the originals that you moved off you don't free up space. You should move the folder structure over to the new hard disk and then reconnect the folders in Lightroom. That should make it refind all your images.
That said, if you are uncomfortable with the computer in itself, your best bet is to find a local photography club. There is invariably a Lightroom savvy person in there that could help you move your files. That might be your best bet if you are uncomfortable moving these yourself. A general mac savvy person like you would find at an Apple store or so generally will not be able to help you with this except when they are photographers themselves and know Lightroom. You might get lucky with that.

Looking for corporate or headquarter contact info ASAP

I recently went to a local store in the area to upgrade my husbands phone (specifically January 16, 2015). My husband & I have been under my mother's account for quite some time now so i also wanted to separate our lines to our own account. While my husband was picking out his new phone, the person helping me also encouraged me to get a new phone. i explained to them that i was not due for an upgrade till next November. While convincing us to switch to their Edge plan, they also told me that if i wanted a new phone they could open up an extra line and use it for my iPad while getting a new phone to switch to my current line. So i did everything that they said, agreed to do the Edge and picked out a new phone. I made it specifically clear that i wanted insurance on the phones at the time of purchase which they told me they would take care of, besides the fact that i have been paying for insurance on my line since i've had the phone.
About two weeks later, i had my phone stolen along with my license & money out of my bag. I called Verizon to make a claim with Assurion to get a new phone, and i was told that i did not have insurance on my phone.
So, i headed back to the store and made sure to speak with the person who helped me when we originally got the phones. I explained to her what happened, and she agreed that she did remember me asking to put insurance on the phones and that she was almost positive she did. After waiting about 45 min., the manager of the store came out to tell me that there was no insurance on my phone. That in fact the only insurance i had, was on the new LINE that i opened, not the phone. Besides the fact that i was extremely annoyed with the customer service, now they're telling me that in order for me to get a new phone i would have to purchase it at a full price of $700.
My issue is not only with the customer service but the fact that #1 i never even knew i could open a new line and switch the phone over until they offered it to me. #2 if they knew that i was going to switch the phone to my line, why wouldn't have they insured that line? and #3 if i had insurance on that line already, why did it stop just bc i changed my phone if according to them it is the LINE that keeps the insurance? i am extremely annoyed and appalled at how mislead we were through this whole process.
On top of that all, i now receive a bill for $560 last week (mid-February) when i have only had the phone about a month. They did not take off the Edge discounts they were supposed to, they did not take off the 22% discount i added to my plan while i was at the store when I was approved for it, and now I'm paying for a phone that i don't even have!! Then i start getting numerous calls telling me that if i don't pay my past due balance my lines are going to be disconnected? i have been a customer with Verizon for 10+ years and have NEVER been so annoyed with any of the customer service & billing service i have gone through the passed couple days. If I had to pay the deductible for the insurance, whatever the price, i wouldn't be as annoyed but now I just want to get rid of my account all together. I have always complimented Verizon and always referred them to other people who have other carriers and i will never, ever again. I feel like I've been completely screwed and mislead 100% by these people.
So, since nobody seems to want to help me my only choice is to contact corporate or headquarters to try and have this problem resolved. I think its ridiculous that it has even come this far and they have yet to help a long standing customer. If anyone has any information about how they can help, i would very much appreciate it! Thank you.

I have had nearly the same issue, I was told I was getting a discount that apparently did not exist. the sales person mentioned it several times while searching for phones, and also wrote it on a rate sheet. When I asked for a bill estimate again the discount was applied. None of the discounts show up on the receipts when you sign up, not even the edge discount is shown.
After getting my first bill with no discount I called the support line, they told me to call the store. The store manager said that the discount doesn't exist and there is nothing they can do about it. I sent a picture of the rate sheet to him and he has not responded to calls the last 2 months since. The stock answer I always get is that there is nothing that can be done, and i'm now under contact and stuck with the current plan, even though it is not what i signed on for. I have contacted the president of the region to see what can be done if anything.
I was also given the option to return all the equipment and get a refund by the manager, but when i went to do that another manager said that it was past 14 days and i couldn't return any longer. This was 2 days after the other manager told me i could.
Verizon should take responsibility for the sales people they employ. A mistake is a mistake but the customer shouldn't be penalized for it.

Contact Sheet with Photo ID?

Hello fine folks,
I want to print out the contents of a photo album onto a contact sheet. Bingo ... iPhoto gives me that option.
But a digital contact sheet without photo file numbers is pretty much useless. Is there any way to print a contact sheet that contains the photo file name?
Many thanks!
G4 933 Mac OS X (10.4.6)

John:
There are a couple of workarounds to get a contact sheet with title.
1 - Create a gallery with the File->Export->Web Page menu option and select the option for titles in the gallery page. You can set the number of columns and other info. You don't have to worry about the media pages as you won't be using them. Then open the resulting galley page in Safari and print from there. There's a free 3rd party application,Galerie, that will produce a much nicer gallery page that the default iPhoto one. There's also BetterHTMLExport which has some terrific themes and lots of control.
2 - Create an iPhoto book using the Year Book theme. You can have from 1 to 32 pictures per page and the titles will automatically be put below each photo. Then start a print of the book but actually save it as a pdf file. Then you can use preview to print individual pages.The caveat to this method is that the pages will be in landscape orientation.
Do you Twango?

Can I use automator to pull contact info from Craigslist? I am new to automator, but I am thinking it is possible for sure.

Hello all!
I would like to be able to reply to a large amount of Craigslist emails by pulling the contact info from Craigslist using Automator and putting the emails in a text document.
I have Automator set to:
1. Open Safari
2. Open the Craigslist section an city I want.
3. Pull a list of active listings URL'S
Beyond that, I can not figure out how to have Automator open one page at a time and click the contact info button and then copy the needed info into my text document.
I can have it open all 150 links at one time.....lol but that wont work on my Macbook!!!!
Help please!!!

Hello
You may try the following AppleScript script. It will ask you to choose a root folder where to start searching for *.map files and then create a CSV file named "out.csv" on desktop which you may import to Excel.
set f to (choose folder with prompt "Choose the root folder to start searching")'s POSIX path
if f ends with "/" then set f to f's text 1 thru -2
do shell script "/usr/bin/perl -CSDA -w <<'EOF' - " & f's quoted form & " > ~/Desktop/out.csv
use strict;
use open IN => ':crlf';
chdir $ARGV[0] or die qq($!);
local $/ = qq(\\0);
my @ff = map {chomp; $_} qx(find . -type f -iname '*.map' -print0);
local $/ = qq(\\n);
#     CSV spec
#     - record separator is CRLF
#     - field separator is comma
#     - every field is quoted
#     - text encoding is UTF-8
local $\\ = qq(\\015\\012);    # CRLF
local $, = qq(,);            # COMMA
# print column header row
my @dd = ('column 1', 'column 2', 'column 3', 'column 4', 'column 5', 'column 6');
print map { s/\"/\"\"/og; qq(\").$_.qq(\"); } @dd;
# print data row per each file
while (@ff) {
    my $f = shift @ff;    # file path
    if ( ! open(IN, '<', $f) ) {
        warn qq(Failed to open $f: $!);
        next;
    $f =~ s%^.*/%%og;    # file name
    @dd = ('', $f, '', '', '', '');
    while (<IN>) {
        chomp;
        $dd[0] = \"$2/$1/$3\" if m%Link Time\\s+=\\s+([0-9]{2})/([0-9]{2})/([0-9]{4})%o;
        ($dd[2] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of CODE\\s/o;
        ($dd[3] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of DATA\\s/o;
        ($dd[4] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of XDATA\\s/o;
        ($dd[5] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of FARCODE\\s/o;
        last unless grep { /^$/ } @dd;
    close IN;
    print map { s/\"/\"\"/og; qq(\").$_.qq(\"); } @dd;
EOF
Hope this may help,
H

I'm too old to learn iCal. How do I tell iTunes to synch with Outlook for Mac for all of the Contacts and the Calendar on my iPhone and iPad?? Thanks

I'm too old to learn iCal. How do I tell iTunes to synch with Outlook for Mac for all of the Contacts and the Calendar on my iPhone and iPad??
Also, once I figure out how to replace iCal with Outlook/Mac on iTunes, how do I synch the phone and pad so that the information on those devices over-writes onto Outlook as a backup, rather than having a blank Calendar on Outlook wipe out all of the information on the phone and pad???
Thanks

If you haven't tried already, plug your devices into iTunes, and on each device next to the "Summary" tab at the top is another tab called "Info." Click that and scroll down to Contacts, Calendars, etc. There should be a pull down bar under each category for "Sync contacts from..." and you should be able to select from that pull down list Outlook. Hit Apply at the bottom and see if that does it.

HT5624 Why in my email ( the one on my ipod5 that I use with my apple ID) when I get emails about my use of my apple ID to use a service in the from field it has my fathers name and when I click on it it shows his contact info ????

Why in my email ( the one on my ipod5 that I use with my apple ID) when I get emails about my use of my apple ID to use a service in the from field it has my fathers name and when I click on it it shows his contact info ???? I also set up my apple ID with a new email account and also I signed up for iCloud but used the same apple I'd email and password but it gave me a I cloud email! I did activate the favorites in my email . Noticed the from field has my fathers name and contact and it is a notification about me using my apple ID to sign in to FaceTime! Something is messed up, not sure how or why???

i didn't read a lot of your 2nd paragraph, but it seems like the password is the issue, right?
do a true clean install
reboot your machine and hold down command+option+r, you should see a spinning globe - if you don't see the globe or anything that reads internet recovery, shut down and try again
at menu, chose disk utility and once there, find your HD on the left side, select the physical name and erase it as mac journaled
exit disk utlity
at menu, choose install OSX
this time, when it asks for a password just hit continue, it will let you complete without a password
you should be able to get into your laptop, now figure out what password you'll be able to use with your kb issue

How do I back up Contacts on my iPhone 3 I got back in 2008? With MobileMe closing down, is there a way I export my Contacts info to my laptop. Alternately can I use iCloud with an iPhone this old?

How do I back up Contacts on my iPhone 3 I got back in 2008? With MobileMe closing down, is there a way Ican export my Contacts info to my laptop. Alternately can I use iCloud with an iPhone this old?

Outlook 2003, 2007, or 2010 along with syncing calendar events and notes, or with the address book app used by Windows Mail called Windows Contacts for syncing contacts only.
Before syncing contacts with an empty Windows Contacts address book, enter one contact in Windows Contacts. This will provide a merge prompt with the first sync for this data which you want to select. Syncing direct with Windows Contacts via the iTunes sync process is selected under the Info tab for your iPhone sync preferences with iTunes.

Contact sheet with Photoshop CS5 Windows 7

Hello
As I tried to make some contact sheets with Photoshop CS5, I found that this functions disappeared from the "Automatization" menu (I had it in Photoshop CS3)
How could I do ? Is there some special "plugin" to do that ?
I use a french version of Photoshop CS5 running on Windows 7
Thanks Have a good day

Yes, do try the bridge version and also you can download the Optional plugins for cs5,
which includes the old contact sheet II, but please READ the instructions before installing.
http://www.adobe.com/support/downloads/product.jsp?product=39&platform=Windows
MTSTUNER

Contact sheet with variable rows/columns

I'm interested in an InDesign Contact Sheet script/plug-in that is capable of creating a contact sheet with variable rows and columns, allowing amages to be placed at 100%. For example, say I have 20 images all of various dimensions. I'd like to place each one on an ID page at 100% while fitting as many on a single page as possible. So if one of the images was 8in x 10in then it would be the only image on the page, assuming a page size of 8.5 x 11. If smaller images were included in the same batch though, they would be placed as many across and as many down as could fit. Any images larger than the select page size would scale to fit on the page.
All of the existing solutions I've found so far force you to choose the number of rows and columns and then images are scaled to meet those requirements.
Does anyone know if such a solution is out there?

A stand-alone app that can do the same thing, essentially create scatter proofs, may work as well. If anyone knows of such a thing I'd be interested to hear.

Building contact sheets with CS5

I am trying to build contact sheets with Bridge in CS5. The feature works great except if you have an odd number of images, the last of the images are built into the contact sheet at a much larger size and not kept proportional to the first images in the contact sheets ie: if you are building 8x11 contact sheets with 18 images and you want 8 images per sheet, the first two sheets are great and the last sheet with the final 2 images have the images at a much larger size relative to the first 16 images. Is there a way to have bridge maintain the correct image proportion on all contact sheets short of creating "dummy" images that divide by 8 for instance giving you an equal number?

Hi,
You can also try asking here if no one replies to this post (Bridge Windows forum):
http://forums.adobe.com/community/bridge/bridge_windows
I don't have enough experience with the Bridge Output Module options to suggest anything, sorry. If you post in the Bridge forum and don't get any replies in a week, ping back here and I'll see if I can get some answers for you.
regards,
steve

Looking for Executive Contact info

I've seen it on this site before, but good luck trying to search Verizon for contact information for their top executives! You can have their speeches emailed to you, but I can't find how I can email MY speech to them! Can anyone help me here? I am a very DISSATISFIED customer and I want my voice heard by someone other than the lowly customer service reps who caused my frustration to begin with.

I work in TV news as a reporter...and Im frequently trying to find contact info on people. Many corporations have begun to deliverately hide contact info of ANY kind nowadays. In my opinion, any publicly held corporation should be required to openly post contact info for its corp officers. Yeah like THATS gonna happen with a corporately purchased congress!

Contact sheets with header for contact info?

Similar Messages

Maybe you are looking for