Container in the webdynpro
hi,everyone,
How can i place a TransparentContainer in the center of the outputscreen of the webdynpro.please give me the steps
Tony++++++++++++++++++++++++
HI Tony,
Sorry i should have mentioned one more thing. The layout of RootUIElementContainer should be Matrix or Grid. Then only width property will be visible.
Under RootUIElementContainer Insert Child Invisible UIE. After that again Insert Child, TransparentContainer. Now u can use some logic to set the position.
U can dynamically also set the width property etc of UIEs like Invisible element.
Regards,
Piyush.
Similar Messages
-
FM to read multiline WF container from abap webdynpro
Hi Gurus,
We are stuck in reading workflow multiline container in our ABAP webdynpro code. Hope some one can assist us.
Let me brief you the issue.
We need to read the workflow multiline container using our webdynpro program. we are using the FM SAP_WAPI_READ_CONTAINER to read the container elements of the workflow by passing workitem id as an input. But this FM is failing to pick the multiline container. Can any one of you advise the alternate way to proceed with this ?
Merry Christmas to all.
Cheers,
BG SuseendranHello Suseendran !
Thanks for your Christmas wishes.
You can use the following function modules :
SWI_READ_CONTAINER_OBJECT
SWW_WI_CONTAINER_READ
Regards,
S.Suresh -
Reading Task Container in ABAP Webdynpro
Hi All,
I have to read the task container in ABAP Webdynpro to show the details on a ABAP interactive form which is embedded in WDA. For this I have approached in the following way.
1) Task is configured in SWFVISU with DYNPARM = WI_ID=${item.externalId}
2) Workitem is obtained in UWL and ABAPWebDynpro is launched when Task is executed from UWL
3) START is the "startup" plug that triggers the HANDLESTART method
This method has WDEVENT as a standar parameter. Then the following code is for reading the URL parameters.
wdevent->get_data(
EXPORTING
name = if_wd_application=>all_url_parameters
IMPORTING
value = l_url_parameters ).
READ TABLE l_url_parameters WITH KEY name = 'WI_ID' INTO l_url_parameter.
4) Set the WI_ID to a componentcontroller attribute
5) This attirbute is now binded to the WDDOMODIFYVIEW method of the View
6) Finally set the form elements attributes of the VIEW by reading the container based on the WI_ID
Problems:
1) I am not getting the form populated
2) The form is getting populated if I hardcode the WI_ID and execute the application directly from backend.
Please tell me where I might have gone wrong.
Thanks
Debsolved by self
-
My iCloud contact list does not contain all the contacts listed in my iPhone 5S. If I delete a contact from the phone it instantly deletes it from the iCloud on my PC. But my PC iCloud list is lacking many of the contacts on my phone.
And which account did you enter these contacts in?
On My Mac
or
iCloud? -
When deploying the webdynpro java application , showing error message
Hi Masters,
when deploying the webdynpro java application , showing error message. Please reply why this problem showing and what is the solution
But Iogin to sdm tool ( remote gui .sh) with same password, which password i am using for deploy the webdynpro java application.here in sdm tool i am able to login. and i restart the sdm , and again trying to deploy the same problem it showing.
URL to deploy : file:/C:/DOCUME1/ppuser/LOCALS1/Temp/temp30925rupa.com~sales.ear
Result
=> deployment aborted : file:/C:/DOCUME1/ppuser/LOCALS1/Temp/temp30925rupa.com~sales.ear
Aborted: development component 'sales'/'rupa.com'/'LOKAL'/'0.2010.02.13.14.32.39':Caught exception during application deployment from SAP J2EE Engine's deploy API:com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [devsap] with user name: [J2EE_ADMIN] Check your login information. Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: No login module succeeded.] (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).DMEXC)
Deployment exception : The deployment of at least one item aborted
Edited by: sujana mullapudi on Feb 13, 2010 2:52 PMHi Sujana,
For deploying Web Dynpro for Java application, J2EE_admin correct password must be stored in the scured area of config tool.
Your error show that J2EE_admin information is not correct.
So, Please ask your basis team to update new J2EE_ADMIN password or you can do it in scured area of config tool.
Hope this will helps you.
Thanks
Arun Jaiswal -
Runtime Error While executing the WebDynpro Application
I am getting the Runtime Error While executing the WebDynpro Application. The error message is "TSV_TNEW_OCCURS_NO_ROLL_MEMORY".
It says like "
Short text
No roll storage space of length 9728 available for OCCURS area.
What happened?
Each transaction requires some main memory space to process
application data. If the operating system cannot provide any more
space, the transaction is terminated.
But while executing some other Web Dynpro Applications, i am not facing this problem.Generally this error is a result of an infinite loop on internal table or select endselect statement where by severs temporary memory gets full. With no memory to insert new records in temporary memory system generates the dump.
Check your application or ask basis consultant to look at the memory parameters in instance profile.
Regards
Rohit Chowdhary -
Microsoft support engineer, Mohamed Ameen, suggested I post this question/problem here.
I have a Windows 8.1 (64) PC that has a problem with a phantom or ghost Homegroup that is preventing it from becoming a part of a Homegroup on my home LAN. The Homegroup troubleshooter utility and all of the standard troubleshooting suggestions online have
been of no help.
I found this thread ("http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/homegroup-wont-go-away-ghost-group-on-whole/8a4f464f-e461-47aa-af05-07a4fd4875fd") which suggests replacing the Machinekeys folder, but it has very little
in the way of instructions on how to completely perform the "repair" and/or the risks of causing other OS and program failures.
I have added additional information and screen shots to the thread I started on the Microsoft Community site and rather than repeating all of that I thought it would be easier to include a thread to that discussion: (http://answers.microsoft.com/en-us/windows/forum/windows8_1-networking/what-is-contained-in-the-machinekeys-folder/d7fb5189-e8c2-4ec8-ba2f-9e4e53905703Hi,
For this problem, you can try to use Process Monitor the trace when creating HomeGroup on XPS PC, then find the reason of this problem.
You can access to the link below to download Process Monitor:
https://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
How to capture a Process Monitor trace:
http://blogs.msdn.com/b/dswl/archive/2010/01/10/how-to-capture-a-process-monitor-trace.aspx
Learning Example:
Using Process Monitor to Troubleshoot and Find Registry Hacks:
http://www.howtogeek.com/school/sysinternals-pro/lesson5/all/
Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Is FileVault necessary if disk contains only the OS?
I have two disks on my MacBook.
The first one is an SSD that contains only OS X. The second one is a regular HD which contains my home folder.
This second HD is an encrypted partition, so it can't be opened without a password — and if you plug it into another computer, it won't be readable without that password.
My question is: should I use FileVault in the SSD, even if my home folder is already encrypted?
If someone steals my MacBook, they won't be able to open any of my personal files (since they're in the encrypted home folder).
Would they be able to get anything useful and harmful from just the SSD that contains OS X?Try to change the value from General Settings – Resource Throttling from central administration.
Here are the steps below to change.
http://sharepointlk.wordpress.com/2012/04/09/the-query-cannot-be-completed-because-the-number-of-lookup-columns-it-contains-exceeds-the-lookup-column-threshold/
Bala -
Hi there,
I'm getting this error when opening Firefox 5:
FATAL ERROR : The dynamic C library contained in the extension file could not be found.
I've never seen this error before... First time it happened was immediately after DLing Firefox 5 yesterday. I haven't DLed or installed anything else recently.
I see that you already have my system info. Any help is much appreciated!Just read in another post that there is a known 49 character limit on the file path for QuickTime movies..
-
Unable to view Imported DC from NWDI in the webdynpro explorer view
Hello,
I am facing problem with NWDS version 2.0.22. we are upgradeing EP04 SPS 14 to sps 22. When I import a DC project from NWDI from inactive view of development configuration perspective I cannot see the created DC's in Webdynpro Explorer view of webdynpro perspective but it is showing in Navigator view.
Also when I create Webdynpro Project or Webdynpro DC locally I was able to see it in Webdynpro Explorer view.
Can any one please tell me why I was not able to view imported Webdynpro DC's that I create from Inactive view of Development Configurations perspective (selected DC in inactive view and right click and create project).
Also when I compared the Folder structure in the Navigator view of Webdynpro perspective. I found below folders structure differences.
Imported DC from Inactive View of Development configurations
Folders:
cfg, def, gen, Model Folder (and sub-forders), src(and sub-forders), test.
Files:
.dcdef and .project
Locally created DC (which is visible in the Webdynpro Explorer view)
Folders:
bin, cfg, def, gen, gen_ddic(and sub-forders), gen_wdp(and sub-forders), lib, META-INF, Model Folder, src(and sub-forders), test.
Files:
.classpath
.dcdef
.project.
ThanksHi Experts,
I get below error when I create project.
com.sap.tc.devconf.SyncException: Failed to sync DC "xx.com/xxdcnamexx(xx.com_xx_1)" in configuration "xx_D". File "C:\Documents and Settings\Administrator\.dtc\0\DCs\xx.com\dcname\_comp\.dcdef" does not exist locally after sync but it exists on the server
at com.sap.tc.devconf.impl.DCProxy.syncSources(DCProxy.java:916)
at com.sap.tc.devconf.impl.DCProxy.syncAsSources(DCProxy.java:744)
at com.sap.tc.devconf.impl.DevelopmentConfiguration.syncAsSources(DevelopmentConfiguration.java:4964)
at com.sap.tc.devconf.impl.DevelopmentComponentNode.syncAsSources(DevelopmentComponentNode.java:955)
at com.sap.ide.eclipse.component.provider.actions.dc.DcCreateProjectAction$1.syncSelectedDCs(DcCreateProjectAction.java:443)
at com.sap.ide.eclipse.component.provider.actions.dc.DcCreateProjectAction$1.execute(DcCreateProjectAction.java:237)
at org.eclipse.ui.actions.WorkspaceModifyOperation$1.run(WorkspaceModifyOperation.java:71)
at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1595)
at org.eclipse.ui.actions.WorkspaceModifyOperation.run(WorkspaceModifyOperation.java:85)
at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:101) -
How to set the WebDynpro application title (IE windows title)?
Hello all,
I would like to set the WebDynpro application title according to the current transaction ID. This title is the IE windows title that is shown on the upper left-corner of the IE browser.
Rule: [Object Instance Information] u2013 [Application Title] u2013 [Browser Title]
For example: Trans. <No.> - <My App> - Windows Internet Explorer
I would like to set <No.> dynamically on run-time according to my current transaction number.
I have this piece of code that gets a reference to the application info:
data: lr_app_info TYPE REF TO if_wdr_rr_application.
lr_app_info ?= wdr_task=>application->application_info.
And there is lr_app_info->get_description() method to have the description of the application, but there is no set method.
The application description can be hardcoded in:
tx. SE80, opening the WebDynpro component, then accessing its WebDynpro application. In the properties tab, there is a description field. I need to append transaction ID to it.
Do you know any way to implement this? This issue is for WebDynpro ABAP.
Best regards and thanks in advance,
Fouad.Hello Satra,
Thanks for your reply. I already had a look into that thread, but my question is not related to the windows title of the WebDynpro component.
My question is related to the title of the Internet Explorer that we all see on the top left-corner. For WebDynpro , this is the WebDynpro application title. How can we change it?
I hope my question is clear now, and I wish someone can help me soon.
With kind regards,
Fouad. -
Hi, i've searched without success how to create a folder (in unified folders) which contains all the messages of inboxes and outboxes (as it exists in Windows Live Mail).
For me, it would be very useful to search in only one folder when i try to find something in sent and received mails.
Thank'sThis is what Unified Folders does. I'm not sure what exactly you're trying to achieve.
http://kb.mozillazine.org/Global_Inbox#Unified_Folders
You might take a look at this article.
https://support.mozilla.org/en-US/kb/global-search -
How to transport the data contains in the table from development to product
How to transport the data contains in the table from development to production.
Please let me know ASAP.Hello Dilip
Create a workbench request and add the following entries to the request:
Object key: R3TR TABU <name of z-table>
For this object add the following value key:
- client-independent table: '*'
- client-dependent table (e.g. client 100): '100*'
See also: [SAP Network Blog: Transport Table Entries|/people/community.user/blog/2007/01/07/transport-table-entries]
Regards
Uwe -
Hi All. Could anyone resolve my issue.
I was created a package with an Script task written in VB.Net.
The Package was executing Successfully in BIDS.
But when i tried to exceute the same using Sql server Agent Job, Its getting Failed with the below error message
"Executed as user: Admin. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 5:12:27 PM Error: 2013-03-13 17:12:32.33
Code: 0x00000005 Source: Checking Alcon Files Checking Alcon Files Description: Failed to compiled scripts contained in the package. Open the package in SSIS Designer and resolve the compilation errors.
End Error Error: 2013-03-13 17:12:32.33 Code: 0x00000005 Source: Checking Alcon Files Checking Alcon Files Description: BC30179 - enum 'ScriptResults' and enum 'ScriptResults' conflict
in class 'ScriptMain'., ScriptMain.vb, 156, 22 End Error Error: 2013-03-13 17:12:32.36 Code: 0x00000005 Source: Checking Alcon Files Checking Alcon Files Description: The binary
code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully. End Error Error: 2013-03-13 17:12:34.28 Code: 0x00000005
Source: Formating Excel Sheet Formating Excel Sheet Description: Failed to compiled scripts contained in the package. Open the package in SSIS Designer and resolve the compilation errors. End Error Error: 2013-03-13 17:12:34.28
Code: 0x00000005 Source: Formating Excel Sheet Formating Excel Sheet Description: BC30179 - enum 'ScriptResults' and enum 'ScriptResults' conflict in class 'ScriptMain'., ScriptMain.vb, 191, 22 End Error
Error: 2013-03-13 17:12:34.29 Code: 0x00000005 Source: Formating Excel Sheet Formating Excel Sheet Description: The binary code for the script is not found. Please open the script in the
designer by clicking Edit Script button and make sure it builds successfully. End Error Error: 2013-03-13 17:12:51.56 Code: 0x00000004 Source: Checking Alcon Files Description:
The binary code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully. End Error Error: 2013-03-13 17:12:51.56 Code: 0xC0024107
Source: Checking Alcon Files Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 5:12:27 PM Finished: 5:12:51 PM
Elapsed: 24.336 seconds. The package execution failed. The step failed."
Please give some solution to this.
Thanks in advanceAre you editing this job in SQL 2012? Is it wrapping your paths in \"? Like for example does the command line tab on the step look like this:
/FILE "\"D:\yourPathGoesHere.dtsx\"" /CONFIGFILE "\"D:\yourPathGoesHere.dtsConfig\"" /CHECKPOINTING OFF /REPORTING E
That's the problem I had, and I resolved it by recreating the whole thing via SQL Script and getting rid of all those \" things. I think that is preventing SSIS from looking up the precompiled binaries for your Script Task. So you should edit the command
line manually:
/FILE "D:\yourPathGoesHere.dtsx" /CONFIGFILE "D:\yourPathGoesHere.dtsConfig" /CHECKPOINTING OFF /REPORTING E
Please write back whether that helps you. David Dye's answer didn't help me at all. -
Download functionality in EXCEL and PDF format to the Webdynpro iView
Hi Expert,
I am using NW 7.0 ehp1 sp3. I developed some Webdynpro RFC model application for the product catalog of the material related data.
Now my requirement is to provide the download functionality in EXCEL and PDF format to all of these Webdynpro (java) iView.
How we can achieve this requirement? In which part of the webdynpro application we have to write the code?
Someone can help me very clearly in steps to achieve this?
Thanks,
KundanHi,
I don't think it is possible to redirect the html stream of the Web Dynpro iView to a PDF / Excel document, since it essentially would mean you have to call the Web Dynpro application again, maintaining the state and context of the iview itself
However, using (for instance) the JExcelApi (Excel) or iText (PDF) you could create documents using the data displayed in your Web Dynpro iView, which has the added benefit you could design and layout your PDF / Excel documents in a more suitable layout for printing (most WD applications look horrible when printed)
Cheers,
Robin
Maybe you are looking for
-
How can I manage the songs recommended to me in emails?
So a while back I bought some gag songs to put together a compilation. Now I get near weekly emails from iTunes telling me about all the new songs I might like based on those gag songs. How can I get itunes to stop recommending those to me? Is there
-
Can I install Windows 7 (64 bit) on late 2013 edition of MacBook Pro?
Can I install Windows 7 (64 bit) on late 2013 edition of MacBook Pro using Bootcamp? Before today, I would have never even asked this question due to the large number of users who continue to use Windows 7 in the PC world! However, there seems to be
-
Cannot connect to database because log file is deleted
Greetings, I just recently cleaned up some junk files from my PC and didn't realize that an oracle log file got deleted. Therefore when I try to connect to the database I got the following error: ORA-01033: ORACLE initialization or shutdown in progre
-
JDBC drivers for postgres+classpath for windows
I've written an application for university last year, that connects to a postgres database. It worked perfectly on the Debian, but I'm trying to run it on Windows 2000 now. I've downloaded the driver http://jdbc.postgresql.org/download/postgresql-8.0
-
Please fix the compatibility issue regarding google tool bar
I have now FF5 and this version is NOT compatible with Google Tool Bar. I have all of my favorites and bookmarks on that tool. I do not and will not use the bookmark feature in FF. Google is everywhere and I can access it most places and feel it is a