CONTAINS searching on multtiple cols in the SAME table

Hi All
Perhaps some of you may be able to point me in the right direction. I have a table that contains 2 fields, as follows:
DESCRIPTION varchar2(4000)
ADDITIONAL_INFORMATION varchar2(4000)
I need to perform CONTAINS() exact and fuzzy searching on these combined columns.
Do I
1. create two separate indexes
2. combine them into one? and if so how is the best way to do that?
Thanks much !!!
Robert

I would use a multi_column_datastore.

Similar Messages

How do I search for overlapping polygons in the same table?

I have a table of approxiimately 1200 polygons. How can I find the records where there is an overlap between any of these polygon records? I'm using oracle Spatial 11g R2.

Hi,
use
SDO_GEOM.RELATE
reference link: SDO_GEOM Package (Geometry)
hope this helps.
Regards,

Is it possible to search for multiple folders with the same name and...

Is it possible to search for multiple folders with the same name and then select them all and change the permissions on just those folders .i.e. Search for the budget folders in all client folders and lock them down to just the project managers. Without having to go to each folder and apply the permissions.

user11919409 wrote:
Is it possible to create a Clone database with the same name of source db using RMAN ...
yes
>
DB version is 11.2.0.2
Is it possible to clone a 11.2.0.2 database to 11.2.0.3 home location directly on a new server . If it starts in a upgrade mode , it is ok ....yes
Handle:     user11919409
Status Level:     Newbie (10)
Registered:     Dec 7, 2009
Total Posts:     102
Total Questions:     28 (22 unresolved)
why do you waste time here when you rarely get any answers to your questions?

HT204022 I have iPhoto, iOS, etc. all up to date.... however my iPad, iPhone, and Mac PhotoStreams all contain different pictures and aren't the same. Any ideas why? I'd rather not reset the whole thing if I don't have too.

I have iPhoto, iOS, etc. all up to date.... however my iPad, iPhone, and Mac PhotoStreams all contain different pictures and aren't the same. Any ideas why? I'd rather not reset the whole thing if I don't have too.

OK, restart in Safe Mode, this will clear some caches. It's possible one or more is corrupt. To restart in Safe Mode when you hear the start up tone hold down the Shift Key until you see a progress bar. Let it fully boot then restart normally and test.
Also I am assuming you have checked Finder - Preferences - General and see what boxes are checked in "Show these items on desktop." You can also mount an item in Disk Utility, simply highlight it and then look in the File menu for Mount.....

Historical and transaction data in the same tables creates perf problems

Our Oracle based application is slow partly due to the fact that historical data are kept in the same table as transactional data. For example records about deceased patients, patients treated 5 years ago...etc, are kept in the one and only one patient table, which is needed to run the daily process of the hospital. So gradually all our major tables PATIENTS, CHARTS, NAMES, APPOINTMENTS have grown very large and since most of our SQL join all these tables at the same time, then all screens and reports run very slowly. I have introduced the idea that we should split all these tables in two: historical PATIENTS data, and CURRENT PATIENTS data...the same with all the others. A nice system would first search in the smaller transactional tables, which would run faster being smaller, and if no data found, then fallback to the historical tables. But this would require programming. From what I have read mateialized view could solve part of our problem. We could have views containing for example only one year worth of the data, and I guess any changes could be later replicated in the base table. What I dont know is what to do if we cannot find the patient in the matealized views ? Do I need to fallback to another SQL which will search in the initial base tables ? Anyway we can implement this without programming ? Tx.

Appointment table: 207,470
Visit table: 5,890,920
Patient table: 2,993,129
Chart table: 2,864,069
Patient names table: 3,938,118
SELECT
    APPOI_OR_VISIT,
    VISIT_SEQ,
    PAT_SEQ,
    INST_CODE,
    INST_CODE_DISPL,
    INST_DESC,
    CLINIC_CODE,
    CLINIC_CODE_DISPL,
    CLINIC_DESC,
    SPEC_CODE,
    SPEC_CODE_DISPL,
    SPEC_DESC,
    VISIT_DATE,
    VISIT_TIME,
    VISIT_TIME_ARRIVAL,
    APPTYPE_CODE,
    SESSION_DOM_MODE,
    PRESTYPE_CODE,
    PRESTYPE_DOM_TYPE,
    DIA_CODE,
    VISIT_TIME_START_RESP,
    VISIT_TIME_DISCHARGE,
    APPOI_NB_DURATION,
    VISIT_TX_REASON,
    VISIT_TX_COMMENT,
    EXTDOC_CODE,
    VISIT_PN_REFPHYS_NAME,
    PATYPE_CODE,
    PAYRESP_CODE,
    VISIT_IND_GROUP,
    VISIT_PCODE,
    VISIT_IND_COMPLETE,
    VISIT_IND_ADMISSION,
    VISIT_IND_CONFIDENTIALITY,
    VISIT_DATE_ACCIDENT,
    APPOI_SEQ,
    BILLING_CODE,
    VISIT_TX_DIAGNOSIS,
    CST_CODE_1,
    CST_CODE_2,
    CST_CODE_3,
    APPOI_DH_CRE,
    APPOI_CODE_CRE_USER,
    APPOI_DH_MOD,
    APPOI_CODE_MOD_USER,
    VISIT_CODE_CRE_USER,
    VISIT_DH_CRE,
    VISIT_UPDATED_COUNT,
    VISIT_CODE_MOD_USER,
    VISIT_DH_MOD,
    APPOI_PAYRESP_CODE,
    APPOI_DT_ACCIDENT,
    PATIENT_LAST_NAME,
    PATIENT_FIRST_NAME,
    PATIENT_CONFIDENTIALITY,
    PATIENT_CHART_EXT,
    TO_NUMBER(SUBSTR(PATIENT_CHART_EXT, 1, INSTR(PATIENT_CHART_EXT, '|')-1)) AS PATIENT_CHART_NO,
    PAT_IND_SPECIAL_RISK
FROM
    SELECT
        'VISIT'              AS APPOI_OR_VISIT,
        VISIT.VISIT_SEQ,
        VISIT.PAT_SEQ,
        INSTITUTION.INST_CODE,
        INSTITUTION.INST_CODE_DISPL,
        INSTITUTION.INST_DESC,
        CLINIC.CLINIC_CODE,
        CLINIC.CLINIC_CODE_DISPL,
        CLINIC.CLINIC_DESC,
        SPECIALTY.SPEC_CODE,
        SPECIALTY.SPEC_CODE_DISPL,
        SPECIALTY.SPEC_DESC,
        VISIT.VISIT_DATE,
        VISIT.VISIT_TIME,
        VISIT.VISIT_TIME_ARRIVAL,
        VISIT.APPTYPE_CODE,
        VISIT.SESSION_DOM_MODE,
        VISIT.PRESTYPE_CODE,
        VISIT.PRESTYPE_DOM_TYPE,
        VISIT.DIA_CODE,
        VISIT.VISIT_TIME_START_RESP,
        VISIT.VISIT_TIME_DISCHARGE,
        VISIT.APPOI_NB_DURATION,
        VISIT.VISIT_TX_REASON,
        VISIT.VISIT_TX_COMMENT,
        VISIT.EXTDOC_CODE,
        VISIT.VISIT_PN_REFPHYS_NAME,
        VISIT.PATYPE_CODE,
        VISIT.PAYRESP_CODE,
        VISIT.VISIT_IND_GROUP,
        VISIT.VISIT_PCODE,
        VISIT.VISIT_IND_COMPLETE,
        VISIT.VISIT_IND_ADMISSION,
        VISIT.VISIT_IND_CONFIDENTIALITY,
        VISIT.VISIT_DATE_ACCIDENT,
        VISIT.APPOI_SEQ,
        VISIT.BILLING_CODE,
        VISIT.VISIT_TX_DIAGNOSIS,
        VISIT.CST_CODE_1,
        VISIT.CST_CODE_2,
        VISIT.CST_CODE_3,
        VISIT.APPOI_DH_CRE,
        VISIT.APPOI_CODE_CRE_USER,
        VISIT.APPOI_DH_MOD,
        VISIT.APPOI_CODE_MOD_USER,
        VISIT.VISIT_CODE_CRE_USER,
        VISIT.VISIT_DH_CRE,
        VISIT.VISIT_UPDATED_COUNT,
        VISIT.VISIT_CODE_MOD_USER,
        VISIT.VISIT_DH_MOD,
        NULL AS APPOI_PAYRESP_CODE,
        TO_DATE(NULL) AS APPOI_DT_ACCIDENT,
        NAME.NAM_PN_NAM AS PATIENT_LAST_NAME,
        NAME.NAM_PN_FNAM AS PATIENT_FIRST_NAME,
        CONFIDENTIALITY.CONF_DESC AS PATIENT_CONFIDENTIALITY,
        PI_SECURITY.F_GET_CHART_NUMBER_SCAN_CODE(VISIT.PAT_SEQ, 103 /*:pChartInstitutionID*/, 0) AS PATIENT_CHART_EXT,
        PATIENT.PAT_IND_SPECIAL_RISK
    FROM
               AS_T_VISITS        VISIT,
               CT_R_INSTITUTIONS INSTITUTION,
               AS_T_CLINICS       CLINIC,
               CT_R_SPECIALITIES SPECIALTY,
               PI_T_NAMES         NAME,
               PI_T_PATIENTS      PATIENT,
               PI_R_CONF_LEVELS   CONFIDENTIALITY
    WHERE
        VISIT_DATE >= TO_DATE('2004-04-01', 'YYYY-MM-DD') /*:P_VISIT_DATE_FROM*/ AND
        VISIT_DATE <= TO_DATE('2004-04-02', 'YYYY-MM-DD') /*::P_VISIT_DATE_TO*/ AND
        CLINIC.CLINIC_CODE = VISIT.CLINIC_CODE AND
        SPECIALTY.SPEC_CODE = CLINIC.SPEC_CODE AND
        INSTITUTION.INST_CODE(+) = VISIT.INST_CODE AND
        NAME.PAT_SEQ = VISIT.PAT_SEQ AND
        NAME.NAMTYP_CODE = 1 AND
        PATIENT.PAT_SEQ = VISIT.PAT_SEQ AND
        CONFIDENTIALITY.CONF_CODE (+) = PATIENT.CONF_CODE
    UNION
    SELECT
        'APPOI'                                                                                                                                                                                                        AS APPOI_OR_VISIT,
        0                                                                                                                                                                                                                            AS VISIT_SEQ,
        NVL(APPOINTMENT_GROUP.PAT_SEQ, APPOINTMENT.PAT_SEQ) AS PAT_SEQ,
        INSTITUTION.INST_CODE,
        INSTITUTION.INST_CODE_DISPL,
        INSTITUTION.INST_DESC,
        CLINIC.CLINIC_CODE,
        CLINIC.CLINIC_CODE_DISPL,
        CLINIC.CLINIC_DESC,
        SPECIALTY.SPEC_CODE,
        SPECIALTY.SPEC_CODE_DISPL,
        SPECIALTY.SPEC_DESC,
        APPOINTMENT.SESSION_DATE                                                                                                                                                                AS VISIT_DATE,
        APPOINTMENT.APPOI_TIME                                                                                                                                                                     AS VISIT_TIME,
        ''                                                                                                                                                                                                                  AS VISIT_TIME_ARRIVAL,
        APPOINTMENT.APPTYPE_CODE,
        APPOINTMENT.SESSION_DOM_MODE,
        0                                                                                                                                                                                                                            AS PRESTYPE_CODE,
        ''                                                                                                                                                                                                                  AS PRESTYPE_DOM_TYPE,
        0                                                                                                                                                                                                                            AS DIA_CODE,
        ''                                                                                                                                                                                                                  AS VISIT_TIME_START_RESP,
        ''                                                                                                                                                                                                                  AS VISIT_TIME_DISCHARGE,
        APPOINTMENT.APPOI_NB_DURATION,
        APPOINTMENT.APPOI_TX_REASON                                                                                                                                                           AS VISIT_TX_REASON,
        APPOINTMENT.APPOI_TX_COMMENT                                                                                                                                                      AS VISIT_TX_COMMENT,
        APPOINTMENT.EXTDOC_CODE,
        APPOINTMENT.APPOI_PN_REFPHYS_NAME                                                                                                                                            AS VISIT_PN_REFPHYS_NAME,
        APPOINTMENT_TYPE.PATYPE_CODE AS PATYPE_CODE,
        0                                                                                                                                                                                                                            AS PAYRESP_CODE,
        DECODE(APPOINTMENT_GROUP.PAT_SEQ,NULL,0,1)                                                                                                                   AS VISIT_IND_GROUP,
        ''                                                                                                                                                                                                                  AS VISIT_PCODE,
        0                                                                                                                                                                                                                            AS VISIT_IND_COMPLETE,
        0                                                                                                                                                                                                                            AS VISIT_IND_ADMISSION,
        APPOINTMENT.APPOI_IND_CONFIDENTIALITY                                                                                                                                  AS VISIT_IND_CONFIDENTIALITY,
        TO_DATE(NULL)                                                                                                                                                                                          AS VISIT_DATE_ACCIDENT,
        APPOINTMENT.APPOI_SEQ,
        0                                                                                                                                                                                                                            AS BILLING_CODE,
        ''                                                                                                                                                                                                                  AS VISIT_TX_DIAGNOSIS,
        0                                                                                                                                                                                                                            AS CST_CODE_1,
        0                                                                                                                                                                                                                            AS CST_CODE_2,
        0                                                                                                                                                                                                                            AS CST_CODE_3,
        APPOINTMENT.APPOI_DH_CRE                                                                                                                                                                AS APPOI_DH_CRE,
        APPOINTMENT.APPOI_CODE_CRE_USER                                                                                                                                                 AS APPOI_CODE_CRE_USER,
        APPOINTMENT.APPOI_DH_MOD                                                                                                                                                                AS APPOI_DH_MOD,
        APPOINTMENT.APPOI_CODE_MOD_USER                                                                                                                                                 AS APPOI_CODE_MOD_USER,
        ''                                                                                                                                                                                                                  AS VISIT_CODE_CRE_USER,
        SYSDATE                                                                                                                                                                                                             AS VISIT_DH_CRE,
        0                                                                                                                                                                                                                            AS VISIT_UPDATED_COUNT,
        ''                                                                                                                                                                                                                  AS VISIT_CODE_MOD_USER,
        SYSDATE                                                                                                                                                                                                             AS VISIT_DH_MOD,
        PAYRESP_CODE                                                                             AS APPOI_PAYRESP_CODE,
        APPOI_DT_ACCIDENT,
        NAME.NAM_PN_NAM AS PATIENT_LAST_NAME,
        NAME.NAM_PN_FNAM AS PATIENT_FIRST_NAME,
        CONFIDENTIALITY.CONF_DESC AS PATIENT_CONFIDENTIALITY,
                                    PI_SECURITY.F_GET_CHART_NUMBER_SCAN_CODE(APPOINTMENT.PAT_SEQ, 103 /*:pChartInstitutionID*/, 0) AS PATIENT_CHART_EXT,
        PATIENT.PAT_IND_SPECIAL_RISK
    FROM
               AS_T_APPOINTMENTS       APPOINTMENT,
               AS_R_APPOINTMENT_TYPES APPOINTMENT_TYPE,
               AS_T_CLINICS            CLINIC,
               CT_R_SPECIALITIES       SPECIALTY,
               CT_R_INSTITUTIONS       INSTITUTION,
               AS_T_APPOINTMENT_GROUPS APPOINTMENT_GROUP,
               PI_T_PATIENTS           PATIENT,
               PI_R_CONF_LEVELS        CONFIDENTIALITY,
               PI_T_NAMES              NAME,
               AS_T_APPOINTMENT_SEQ_MAPPING SEQMAP
    WHERE
        SESSION_DATE >= TO_DATE('2004-04-01', 'YYYY-MM-DD') /*:P_VISIT_DATE_FROM*/ AND
        SESSION_DATE <= TO_DATE('2004-04-02', 'YYYY-MM-DD') /*::P_VISIT_DATE_TO*/ AND
        APPOINTMENT.APPOI_DOM_TYPE IN('A','AR') AND
        CLINIC.CLINIC_CODE = APPOINTMENT.CLINIC_CODE AND
        SPECIALTY.SPEC_CODE = CLINIC.SPEC_CODE AND
        INSTITUTION.INST_CODE(+) = APPOINTMENT.INST_CODE AND
        APPOINTMENT_GROUP.APPOI_SEQ (+) = APPOINTMENT.APPOI_SEQ AND
        APPOINTMENT_TYPE.APPTYPE_CODE (+) = APPOINTMENT.APPTYPE_CODE AND
        NAME.PAT_SEQ = NVL(APPOINTMENT.PAT_SEQ, APPOINTMENT_GROUP.PAT_SEQ) AND
        NAME.NAMTYP_CODE = 1 AND
        PATIENT.PAT_SEQ = NVL(APPOINTMENT.PAT_SEQ, APPOINTMENT_GROUP.PAT_SEQ) AND
        CONFIDENTIALITY.CONF_CODE (+) = PATIENT.CONF_CODE AND
        SEQMAP.APPOI_SEQ (+) = APPOINTMENT.APPOI_SEQ AND
        SEQMAP.APPOI_SEQ IS NULL
ORDER BY
     VISIT_DATE, VISIT_TIME, PATIENT_CHART_NO

Two LOVs in same UIX page based on the same table

Hi group,
Recently I ran into a problem with a UIX page that has two LOVs based on the same database table. In Emp and Job terminology, here's what I tried to do.
Suppose we have use the Employees and Jobs tables from the HR scheme with one small modification. Add a column called PREFERRED_JOB_ID of type VARCHAR2(10) which is exactly the same as JOB_ID. Hypothetically speaking, this column will be used to allow Employees to select their preferred job in case they want to change their jobs.
Next, create business components in JDeveloper based on the Employees and Jobs table. In order to be able to generate the LOVs for Job and PreferredJob create two ViewObjects, one called JobsLookupView and one called PreferredJobsLookupView. These both need to be based upon the same Jobs EntityObject. Also include the Jobs EntityObject twice in the EmployeesView ViewObject and give one the alias PreferredJobs. Include the JobTitle attributes of Jobs and PreferredJobs in EmployeesView so they can contain the JobTitles selected in our future LOVs.
Next create a ViewController project if it's not already there and enable JHeadstart on it. Create an Application Structure File and create the lookups for the two LOVs. When I run the application I see this happening:
When I click the flashlight icon next to the PreferredJob LOV and select a job, the PreferredJob field is selected in the UIX page but no job title appears. When I next first select the Job LOV and select a new job and then select the PreferredJob LOV again and select a different job, the job that was selected in the Job LOV is now also entered in the PreferredJob field. When I make sure the PreferredJob field isn't required (remove the required="yes" property on the messageLovInput entry for PreferredJobTitle and remove the PreferredJobTitle field from the addRequiredRowItems list in the UIX page) I can save the changes I made in the Employees.uix page. The same JobId is stored in the database for Job and PreferredJob.
This behaviour is probably due to cacheing issues because both LOVs and the EmployeesView ViewObject use one EntityObject for four values in three ViewObjects.
So I then modified my model a bit. I created a new EntityObject called PreferredJobs based on the JOBS table. I modified the EmployeesView ViewObject to use this EntityObject for the PreferredJobTitle attribute and modified the PreferredJobsLookupView to use this EntityObject.
I needed to modify a few things as well in the Application Structure File (which were prompts and whether or not the attribute should be visible in a table) and after regenerating I made sure the PreferredJob attribute isn't required in the UIX page. When I then run the application again, I never see the JobTitle I select in any LOV allthough the PreferredJob field is selected when I select a Job in the PreferredJob LOV. The correct JobId now is stored in the database though.
Has anyone ever encoutered this behaviour? Would anyone know how to get two LOVs based on the same table in one UIX page?
Thanks in advance,
Wouter van Reeven
AMIS

OK I figured it out. When I added the second Lookup ViewObject (PreferredJobs) no additional Association was created. Therefore, ADF BC wasn't able to figure out which field to update. When I added the Association between the PreferredJobs Lookup ViewObject and the Employees ViewObject everything started working ok.
I then recreated my inital situation: one EntityObject for Jobs and one for Employees, now with two Associations between them. After modifying the Employees ViewObject and making sure the Jobs EntityObject was referred twice and via the corresponding Association, everything started working ok.
Greets, Wouter
AMIS

Two Headers in the same table

Hi people,
Since i guess this is a pretty common question, i did make a search in the forum and Google. I did not find the way to have 2 Headers in the same table.
I have a 4 pages long table. The same Header is quite useful in the first 2 pages but not in the last one and for design purposes (autoflow) is nice to have a long table not broken in smaller ones. I mean than in the last 2 pages i would need a different Header than the initial one.
Any idea?
THanks and cheers,
Sebastian

>does your script [will] work on CS3 and Mac?
You mean the tagged text? (I see now I accidentally called it "INX" -- that's something else.) Yes, it's compatible all the way down to CS, but since it describes Javascript objects for CS4 only, the textual contents are of limited usefulness for CS3. However, you can inspect the document to see how to do the table trick.
Create a new, empty InDesign document, preferably of A4 size (as the tables are designed to fit). "Place" the tagged text document as usual -- ID should tell you it's placing tagged text. From then on, wait (and wait and wait some more -- it's about 800 pages) until ID has digested the massive chunk. Then you should get a lot of colorful pages! Click inside any table and, using Table Setup, inspect the Header/Footer tab field. If you deselect "Skip First Header" and "Skip Last Footer", you can see them on every page. Selecting these again hides the first ('continued') and last ('continued from last page') occurrences again.

LookUp to the same table with multiple conditions

Hi,
I nead to do a lookup to the same table in the flow but with diffrent quieres, each query contains it's own 'where'.
Can I do it somehow in one look up or do I have to use a few ?
select a from table where a=1
select b from table where c=3
Thanks

Hi,
Using multiple lookups will be a cleaner approach. If you are using multiple lookups on the same table consider using Cache transform. Refer the below link for details on Cache transform
Lookup and Cache Transforms in SQL Server Integration Services
Alternatively if you want to go ahead with single look up , you may have to modify the SQL statement in the Lookup accordingly to return the proper value. In you case it may be
select a,b from table where a=1 or c=3
Note : Consider the above as a pseudo code. This needs to be tested and applied based on your requirement.
Best Regards Sorna

How to combine 2 the same tables from 2 different databases

We have made 2 databases company1 and company2
Both databases contains the same tables
Now we want to make a report with server reporting services. The report must give us information from the 2 databases.
We use the following query:
SELECT     '501'as divisie, GRV_DebtorOutstanding2.[Debtor code] AS Debiteur, GRV_DebtorOutstanding2.cmp_name AS Naam, SUM(GRV_DebtorOutstanding2.[Outstanding Amount]) AS Saldo,
                      GRV_DebtorOutstanding2.blokkade, GRV_Debtors.City
FROM         [501].dbo.GRV_DebtorOutstanding2 INNER JOIN
                      [501].dbo.GRV_Debtors ON GRV_DebtorOutstanding2.[Debtor code] = GRV_Debtors.[Debtor code]
WHERE     (GRV_DebtorOutstanding2.blokkade = 'B')
GROUP BY GRV_DebtorOutstanding2.[Debtor code], GRV_DebtorOutstanding2.cmp_name, GRV_DebtorOutstanding2.blokkade, GRV_Debtors.City
ORDER BY Debiteur
when we use the same query to select the data of the other database in the same query it doesn't work. I have tried it with the command Union All
But it crashes,
please help, to fix it

Hi Robert,
According to your description, you have created two same databases. When you run the same query for the second database, it doesn’t work.
In your scenario, since databases are the same and the query for first database can work fine, it should also work when query the second database using the same query. When you create second dataset, please check if you have used a correct datasource
which is second database. Then try to run the query again. If issue persists, please share the error message around the time when you query the second database.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

How can I duplicate the same table in 3 pages?

hi everybody!
i have a form with a master page (containing the invoice fields) and 3 body pages that reference the master page.
in each one of these 3 pages there is a table with one header row, 7 body rows and a footer row.
the table was copied and pasted from page 1 to page 2 and page 3.
between the body rows there are two rows that are bound with table data, one for invoice details and one for tax details.
my problem is that in the 2nd and 3rd page in pdf output invoice and tax details are empty, while the other lines are present.
it seems like there is a table index that loops once in the first page until it reaches the end of the table, so for page 2 and 3 it is already at the end...
my question is: how can i get the same complete table in three form pages?
thanks in advance

Not sure I follow .....are you asking for Page 2 and 3 to have the same table and values in the table as on Page1 or does each page have unique data?
Where is the data coming from? Is the user typing it in or is there a separate data source somewhere?
Paul

How to populate data in the same table based on different links/buttons

Hi
I'm using jdeveloper 11.1.4. I have a use case in which i need to populate data in the same table based on click of different links.
Can anyone please suggest how can this be achieved.
Thanks

I have a use case in which i need to populate data in the same table based on click of different linksDo you mean that you need to edit existing rows ?
What format do you have the date in - table / form ?

Data of column datatype CLOB is moved to other columns of the same table

Hi all,
I have an issue with the tables having a CLOB datatype field.
When executing a simple query on a table with a column of type CLOB it returns error [POL-2403] value too large for column.
SQL> desc od_stock_nbcst_notes;
Name Null? Type
OD_STOCKID N NUMBER
NBC_SERVICETYPE N VARCHAR(40)
LANGUAGECODE N VARCHAR(8)
AU_USERIDINS Y NUMBER
INSERTDATE Y DATE
AU_USERIDUPD Y NUMBER
MODIFYDATE Y DATE
VERSION Y SMALLINT(4)
DBUSERINS Y VARCHAR(120)
DBUSERUPD Y VARCHAR(120)
TEXT Y CLOB(2000000000)
NBC_PROVIDERCODE N VARCHAR(40)
SQL> select * from od_stock_nbcst_notes;
[POL-2403] value too large for column
Checking deeply, some of the rows have got the data of the CLOB column moved in another column of the table.
When doing select length(nbc_providercode) the length is bigger than the datatype of the field (varchar(40)).
When doing substr(nbc_providercode,1,40) to see the content of the field, a portion of the Clob data is retrieved.
SQL> select max(length(nbc_providercode)) from od_stock_nbcst_notes;
MAX(LENGTH(NBC_PROVIDERCODE))
162
Choosing one random record, this is the stored information.
SQL> select length(nbc_providerCode), text from od_stock_nbcst_notes where length(nbc_providerCode)=52;
LENGTH(NBC_PROVIDERCODE) | TEXT
-------------------------+-----------
52 | poucos me
SQL> select nbc_providerCode from od_stock_nbcst_notes where length(nbc_providerCode)=52;
[POL-2403] value too large for column
SQL> select substr(nbc_providercode,1,40) from od_stock_nbcst_notes where length(nbc_providercode)=52 ;
SUBSTR(NBC_PROVIDERCODE
Aproveite e deixe o seu carro no parque
The content of the field is part of the content of the field text (datatype CLOB, containts an XML)!!!
The right content of the field must be 'MTS' (retrieved from Central DB).
The CLOB is being inserted into the Central DB, not into the Client ODB. Data is synchronized from CDB to ODB and the data is reaching the client in a wrong way.
The issue can be recreated all the time in the same DB, but between different users the "corrupted" records are different.
Any idea?

939569 wrote:
Hello,
I am using Oracle 11.2, I would like to use SQL to update one column based on values of other rows at the same table. Here are the details:
create table TB_test (myId number(4), crtTs date, updTs date);
insert into tb_test(1, to_date('20110101', 'yyyymmdd'), null);
insert into tb_test(1, to_date('20110201', 'yyyymmdd'), null);
insert into tb_test(1, to_date('20110301', 'yyyymmdd'), null);
insert into tb_test(2, to_date('20110901', 'yyyymmdd'), null);
insert into tb_test(2, to_date('20110902', 'yyyymmdd'), null);
After running the SQL, I would like have the following result:
1, 20110101, 20110201
1, 20110201, 20110301
1, 20110301, null
2, 20110901, 20110902
2, 20110902, null
Thanks for your suggestion.How do I ask a question on the forums?
SQL and PL/SQL FAQ

How do I sum across the same table in multiple sheets?

So I'm trying to figure out an annoying problem.
I have a largish (100's) amount of data with each collection being a table in a sheet, one sheet per data collection. This means I have 100's of sheets, each with the same table name and layout. Each sheet has several hundred data points in it.
How do I do a sum across all of the same table in all the sheets?
For example I want to do Sum('Data Sheet Number *'::'Table 1'::A1) to get a sum of everything in all the A1 cells of all the sheets named 'Data Sheet Number ' followed by anything (I'm using the star in the same way one would do it in a shell...)
Thanks!
Message was edited by: unusedusername
Message was edited by: unusedusername

To respond to WWJD: I was handed the data and I don't have any control over it's format...
I found the answer in the forums though, so I guess I'm answering my own question
http://discussions.apple.com/thread.jspa?messageID=6203991&#6203991
The auto-filling INDIRECT reference worked very well for me.

Multiple and conditions in the same table

Ok I am going to kick myself for this, but I can't figure it out. I am trying to figure out how to find employees which match multiple criteria in the same table.
create table emp
(empno number,
name varchar2(10))
create table skills
(skill_id   number,
skill_code varchar2(20))
create table emp_skills
(empno    number,
skill_id number,
rating   number)
insert into emp values(1, 'SMITH');
insert into emp values(2, 'JONES');
insert into skills values (1, 'SQL');
insert into skills values (2, 'PLSQL');
insert into skills values (3, 'JAVA');
insert into emp_skills values(1,1, 8);
insert into emp_skills values(1,2, 9);
insert into emp_skills values(1,3, 10);
insert into emp_skills values(2,1,9);
insert into emp_skills values(2,2,2);
insert into emp_skills values(2,3,7);Now I need to come up with a query finding all employees who match all 3 of the following criteria:
1) Have at least a 5 rating in SQL
2) Have at least a 6 rating in PLSQL
3) Have at least a 7 rating in JAVA
So using this I would expect to return only SMITH since his/her skills meet all 3 criteria. I dont want to use OR in my query since I want all 3 to match not just one of them.
I have a feeling I will need to self join the table - but this is going to be part of a dynamic query for APEX where the users can choose the skills and ratings they want employees to adhere to, so I dont know the number of criteria or the exact criteria in advance. But I figure if I can get a proof of concept SQL I can make it work dynamically.
Any ideas are appreciated - sorry for the long post but I figure more detail is better

with es1 as(
select s.skill_code, es.empno, es.rating
from skills s, emp_skills es
where s.skill_id = es.skill_id
/* main */
select e.*
from emp e
where
exists
(select 'x' from es1
where es1.rating >= 5
and es1.skill_code = 'SQL'
and es1.empno = e.empno)
and
exists
(select 'x' from es1
where es1.rating >= 6
and es1.skill_code = 'PLSQL'
and es1.empno = e.empno)
and
exists
(select 'x' from es1
where es1.rating >= 7
and es1.skill_code = 'JAVA'
and es1.empno = e.empno)
-- Addition (Another example)
with es1 as(
select s.skill_code, es.empno, es.rating
from skills s, emp_skills es
where s.skill_id = es.skill_id
/* main */
select e.*
from emp e
where
(select count(distinct es1.skill_code) from es1
where
((es1.rating >= 5 and es1.skill_code = 'SQL')
or
(es1.rating >= 6 and es1.skill_code = 'PLSQL')
or
(es1.rating >= 7 and es1.skill_code = 'JAVA')
and es1.empno = e.empno)
=3;

How can I align two different text row in the same table in two different way (one centered and the other one on the left)?

Hi,
I want to center two different text row that are in the same table but one on the center and the other one on the left. I put a <span> tag hoping that it has been overwhelmed the table's class properties The .bottomsel's font-family and the .Cig84's font-family and colour work but the text-align don't: they're both on the left.
These are my source and CSS codes:
Source:
<table width="600" border="0">
<tr>
    <td class="bottomref"><p><span class="bottomsel">| <a href="index.html" target="_self">Main</a> | <a href="about.html" target="_self">About</a> | <a href="clients.html" target="_self">Clients</a> | <a href="contact.html" target="_self">Contact</a> |</span><br />
      <span class="credits">Credits: <span class="Cig84">Cig84</span></span></p></td>
</tr>
</table>
CSS:
.bottomsel {
text-align: center;
font-family: Georgia, "Times New Roman", Times, serif;
.credits {
text-align: left;
.Cig84 {
color: #F00;
font-family: "Comic Sans MS", cursive;

Use paragraph tags with CSS classes.
CSS:
     .center {text-align:center}
     .left {text-align:left}
HTML:
<table width="600" border="0">
<tr>
    <td class="bottomref">
          <p class="center">This text is center aligned</p>
          <p class="left">This text is left aligned</p>
    </td>
</tr>
</table>
Nancy O.

CONTAINS searching on multtiple cols in the SAME table

Similar Messages

Maybe you are looking for