Content being pushed down the page

I have a two column site that I am working on and the content on the right side is being pushed way down the page when it is published.  Has anyone had this happen?  you can see what I am talking about at Home
Thanks for any assistance!

It is lined up now because I was messing with it last night.  I have scripts and custom HTML Widgets that go down the left column that I removed when I add them back it pushes the content on the right below when published.  I will put a screen shot in this post tonight when I have a chance.
Thanks for the help!

Similar Messages

  • Tabbed Panel - prevent page content being pushed down

    What is the setting to prevent an open tab from pushing
    content down that is below it. Rather, just have the tabbed content
    be presented above the content on the page. In other words, have it
    behave like a menu bar with drop down boxes.
    Thanks for any replies.

    You're going to have to tweak the CSS so that the
    TabbedPanelsContent is absolutely positioned. Start by adding rules
    like this *after* the tabbed panels CSS, and tweak it from there to
    suit your needs:
    .TabbedPanelsContentGroup {
    position: relative;
    .TabbedPanelsContent {
    position: absolute;
    top: 0;
    left: 0;
    z-index: 1000;
    --== Kin ==--

  • When I load Safari on my IPAD2, the web page comes up, but I can't scroll down the page. No matter what web page I go to the content stays darker than the navigation bar. This just started today. All other applications work fine.

    When I bring up Safari on my IPAD2, the web page comes up, but I can't scroll down the page. This just started today. No matter what web site I go to, the content is darker than the navigation pane.

    If it's happening on all sites, then assuming that it's Safari that you're using, have you tried clearing it's cache : Settings > Safari > Clear Cache (other browsers should have similar options, possibly within the actual app instead of within Settings). You could also try closing the app completely : from the home screen double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app (or whichever browser you're using) to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    If it's only happening on a particular site then there may be content on that site that isn't supported on the iPad e.g. flash, java, silverlight

  • Look at your iphoto 'page'. On the left is a margin running vertically down the page and within that margin are shown your files/folders - e.g 'events', I can't get that margin contents back

    Look at your iphoto 'page'.
    On the left is a margin running vertically down the page and within that margin are shown your files/folders - e.g 'events', 'last 12 months', 'anniversary' etc etc.
    Now visualize the 'page' but WITHOUT the margin and the entries in it. It just disappeared while I was editing photos.
    I've tried all the 'File', 'Edit', 'View', 'Share' 'Window' & 'Help' options, but no success.
    There is no apparent way of calling up onto the screen any photos, folders etc. because I can't get the margin and its contents back onto the iphoto page.
    I've tried restoring the page from my backup, where it is all perfect, but that didn't work.
    Help please!

    Move your cursor to the extreme left hand side of the iPhoto Window until it turns into a '+' and then click and drag right.

  • Div's being pushed down in Safari

    Hi guys,
    I've built a website for a client. For some unknown reason the footer content gets pushed down on the friends page in Safari and IE - all of the other pages are fine though.
    Here's a link to the site
    Can anyone see why this could be happening - in FF everything is fine though.
    Thank you!
    SM

    On Win 7, Safari, IE9 and Firefox, all looks the same. I am not seeing anything different.
    Jim

  • Where clause one query not being pushed down

    I am having a problem where I cannot get a certain "optional" parameter to be pushed down to a query. The parameter gets applied in memory after the result set is returned but not pushed down to the DB. The function is as follows:
    declare function getFoo($key as xs:string, $optinalInput as xs:string*) as element(b:bar)*
    for $foo in f:getFoo()
    where $key = $foo/key
    where not(exists($optinalInput)) or $foo/optional = $optinalInput<- does not get pushed down to the query
    return $foo
    If I make optinalInput an xs:string instead of xs:string * and the optional parameter will get pushed to the query. The problem is for this optional parameter I could get anywhere from 0-50 in the sequence. Seems like when the parameter is a sequence it doesn't get applied to the query. Is there any way around this?

    Mike,
    I understand the difference between * and ? and I was one of the people working on the "string-length not getting pushed" problem so I am very familiar with it. I tried you solution that you mentioned below and it still did not push the where clause to the query. I know I could achieve this with an ad-hoc query but I wanted to do a pure xquery implementation of this component because of the benefits it could have when interacting with other components in our ODSI project...such as SQL joining and potentially pushing additional where clause down from components that call this component. The only way I did get this to kind of work is to do this:
    return
    for $o in $optinalInput
    for $foo in f:getFoo()
    where $key = $foo/key
    where $o = $foo/optional
    return
    $foo
    for $count in 1
    where not(exists($optinalInput))
    for $foo in f:getFoo()
    where $key = $foo/key
    return
    $foo
    By putting the optional parameter into a FOR statement above the table call it guarantees that at least one will exists and that's why the optional parameter gets pushed properly to the DB with a parameterized query. The problem with this is that even though a parameterized query gets pushed it will call the SQL statement multiple times!...not good.
    Another solution that was suggested to me would be to create the number of sequences for each item in the sequence and treat each item as it's own. For example if you know that the schema limits the sequence from 0..50 then you could make 50 items and 50 where clauses....probably not an optimal solution either but it would achieve properly pushing the where clause tot he DB.
    For now I am satisfied with this optional parameter not being pushed to the DB because the performance was still good but it would be nice if there was a maintainable pure xquery solution to this problem.
    Thanks for the help it's always appreciated!
    Mike

  • Safari Scrolling Down The Page Automatically

    Why is Safari Scrolling Down The Page Automatically? This started 3-Days ago... Also we keep getting the "MacKeep - PopUp" Everytime we Click on an Item in the Original Screen.
    We have All the Latest Update for OS X 10.9.5
    This is Clearly a Software Issue I have spoken to others who are experiencing the same.
    How do we Fix This Bug in Safari?

    You may have installed the "VSearch" trojan, perhaps under a different name. Remove it as follows.
    Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data before proceeding.
    Step 1
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    Reset the home page and default search engine in all the browsers, if it was changed.
    Step 2
    Triple-click anywhere in the line below on this page to select it:
    /Library/LaunchAgents/com.vsearch.agent.plist
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
    Repeat with each of these lines:
    /Library/LaunchDaemons/com.vsearch.daemon.plist
    /Library/LaunchDaemons/com.vsearch.helper.plist
    /Library/LaunchDaemons/Jack.plist
    Restart the computer and empty the Trash. Then delete the following items in the same way:
    /Library/Application Support/VSearch
    /Library/PrivilegedHelperTools/Jack
    /System/Library/Frameworks/VSearch.framework
    ~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
    Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    This trojan is distributed on illegal websites that traffic in pirated content. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that this Internet criminal has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • How do i have subsequent fields label and values move down the page dynamic

    how do i have subsequent fields label and values move down the page dynamicly...
    the field in question "can grow" and can become quite big...overlaping the content of the fileds below...how can i make the fields below this large field move dyanmically so there is no overlap?

    if it is the same field and it is set to can grow you just need to make sure you put space between by inserting a section below

  • Background gradient only extends partway down the page

    Trying to create a CSS gradient for the background of the body tag but I find that it only extends as far down the page as the content goes. So I tried to continue the bottom color by specifying it as a body background color,  but it won't display.
    Any ideas?

    Terrific! Actually it was that last line that did it on my page as I don't have a background image
    Dreamweaver CC created a background for me which consists of 4 lines, one for each type of browser. Below that I added your 'background-attachment:fixed; line and it worked!
    Thanks agian.

  • Printing starts too far down the page - officejet pro 8600

    Have an officejet pro 8600.
    Recently, when printing, two probelms occur...
    (1) the document being printed starts printing approx 1.5" to 2" futher down the page then it should. This results in the bottom portion of the document Not being printed.
    (2) there is a crease/fold approx 3" from the top of the paper.
    It appears that either the paper is being fed too soon or the actual printing is being delayed.
    We have cleaned all the rollers and check the star wheel - no damages
    Thanks for your help
    This question was solved.
    View Solution.

    Hello,
    I would suggest realigning the printer. 
    Setup Menu>Tools>Align Printer
    Let me know the outcome.

  • How do you modify the web.xml to lock down the pages from a user role

    how do you modify the web.xml to lock down the pages from a user role

    I'll make a stab at your question:
    The following is an example of where a URL is protected within a web.xml deployment descriptor. In this example, the URL /protectedA within the application is protected:
    <!-- security constraints -->
    <security-constraint>
    <web-resource-collection>
    <web-resource-name>protectedA</web-resource-name>
    <url-pattern>/protectedA</url-pattern>
    </web-resource-collection>
    <!-- authorization -->
    <auth-constraint>
    <role-name>sr_developer</role-name>
    </auth-constraint>
    </security-constraint>
    Sun's explaination here:
    http://java.sun.com/j2ee/1.4/docs/tutorial/doc/Security4.html

  • Expanding text fields not moving next fields down the page

    I have a multi-page form with several comment boxes that I want to be expandable (if needed).  I've managed to get them to expand, but the fields following the field that is expanding dynamically are not bumping down the page.  I've gone through and read about different things to try and use (flowed, western, expand to fit, etc), but the fields following the expanding fields are not moving.
    I can send the form I am using to anyone who has a suggestion.  I am confused with the hierarchy and where stuff needs to go in order to work correctly.
    Thanks.

    Hi, it is highly recommended that you create subforms in your form. By creating parts in your form you should create subforms for each of those parts. For the textfield you are trying to make it expandable and flowable to the next page, you must make every of its parents flowed. Your main page is actually set to positioned, even if your subform containing the textfield is flowed, if each of its parents are set to flowed it should work, otherwise it will not flow to next page.
    If you set your page to flowed, it will reposition each of your fields because it is not in subforms. Make sure to create subforms for each parts, putting all fields in subforms. If you set your main page to flowed without creating subforms, all of your fields will be redesigned to be aligned left with the hierarchy order.
    Hope this help.

  • Print problem. trying to print a document in Preview, the start of the text prints half way down the page not at the top of the page?

    Print problems.  Printing out an email the text starts half way down the page.  I tried taking a picture of the text I wanted to print, tried to print from Preview and have the same problem.  If anyone has any ideas I would really apreciate it. Thanks Penny

    One more thing to check:  System Preferences/Print & Scan.  Make sure your printer is set as Default.
    I'm using OS X 10.8 and I don't see Page Setup anymore. If you have access to Page Setup, check to see if there are any adjustments to make there.

  • HT1365 Hi can anyone help with this issue regarding my wireless magic mouse? When im on google chrome and scrolling down the page i always have youtube running in the background but the audio cuts/spits/pops can anyone help me with this?

    Hi can anyone help with this issue regarding my wireless magic mouse? When im on google chrome and scrolling down the page i always have youtube running in the background but the audio cuts/spits/pops can anyone help me with this?

    The figures you mention only make sense on your intranet.  Are you still using the same wireless router.  The verizon one is somewhat limited as far as max wireless-n performace.  For one thing it only has a 2.4 radio.   I like many people who wanted wireless-n performance before they even added a wireless-n gigabit router, have my own handling my wireless-n network.

  • Many of my photos appear briefly as I scroll down the page then disappear leaving a box outlined with a broken-line.  The menu bar says that I have 300 pictures hidden, but I am unable to get them unhidden.

    I am experiencing difficulty with iPhoto '11.  Some of more recent photos can not be accessed.  As I scroll down the page of photos, the most recent ones appear briefly, then disappear to be replaced with a box outlined by a broken-line.  The menu bar says that I have 317 photos hidden.  Hiding photos is not something that I normally do, can't imagine why these are hidden.  Anyway, when I try to unhide the photos, I can view them as an event, but if I click on a single photo, or try to move it into an album, the photo does not display.  Instead I get a dark exclamation point within a triangle.  Another problem with these same photos is on the event page there is no key photo for these events only a dark screen.  I can't find an answer to my problem.  Has anyone experienced this?  What is the problem and how can I correct it?  

    The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

Maybe you are looking for